TN-DEV-SYS-IPMGMT-MIB
AI MIB Summary
The TN-DEV-SYS-IPMGMT-MIB module enables monitoring and configuration of IP address management services, specifically tracking Dynamic Host Configuration Protocol (DHCP) lease states, IPv6 address assignments, and Domain Name System (DNS) resolution parameters on the target network device.
The mib provides functionalities for managing the IP DHCP, IPv6 and DNS.
Main OID:
tnDevSysIpMgmtMIB.1.3.6.1.4.1.7483.6.10
68
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
68 total| Object Name |
|---|
tnDevSysIpMgmtMIBThe mib provides functionalities for managing the IP DHCP, IPv6 and DNS. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.10 |
tnDevSysIpmgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.10.1 |
tnIpMgmtTableTable to manage IP status for each device. SEQUENCE OF TnIpMgmtEntry .1.3.6.1.4.1.7483.6.10.1.1 |
tnIpMgmtEntryAn entry containing IP status for each device. TnIpMgmtEntry .1.3.6.1.4.1.7483.6.10.1.1.1 |
tnIpAddressModeThe status of DHCP client. The value of
notApplicable(0) indicating the device don't support DHCP client,
set this value to dhcp(1) to enable DHCP client,
set this value to static(2) to enable static ip.
set this value to bootpc(3) to enable bootp clientrw Enumeration .1.3.6.1.4.1.7483.6.10.1.1.1.1 |
tnIpMgmtAccess(0)IP management access is not applicable.
(1)Enable IP management access.
(2)Disable IP management access.
Use this OID to Enable/Disable IP management access for the device.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.1.1.2 |
tnIpAddrTypeThe IP address type of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.1.1.3 |
tnIpAddrThe IP address of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.1.1.4 |
tnSubnetMaskThe subnet the ipAddr belongs to.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.1.1.5 |
tnDefaultGatewayThe default gateway for the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.1.1.6 |
tnDnsServerTableTable of DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB. SEQUENCE OF TnDnsServerEntry .1.3.6.1.4.1.7483.6.10.1.2 |
tnDnsServerEntryAn entry in the table, containing inforamtion
about a DNS server. TnDnsServerEntry .1.3.6.1.4.1.7483.6.10.1.2.1 |
tnDnsServerIndexIndex of DNS server table.ro Integer32 .1.3.6.1.4.1.7483.6.10.1.2.1.1 |
tnDnsServerIPAddrTypeThe IP address type of the DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.2.1.2 |
tnDnsServerIPAddrThe IP address of the DNS server.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.2.1.3 |
tnDnsServerStatusFor a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.10.1.2.1.4 |
tnIpextMgmtTableTable of IPv6 status. SEQUENCE OF TnIpextMgmtEntry .1.3.6.1.4.1.7483.6.10.1.3 |
tnIpextMgmtEntryAn entry containing IPv6 status for each device. TnIpextMgmtEntry .1.3.6.1.4.1.7483.6.10.1.3.1 |
tnIpv6status(1)enable IPv6
(2)disable IPv6
Use this OID to change the method of IP management access for the device.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.3.1.1 |
tnIpv6AddressLinklocalLink-local IPv6 addressro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.3.1.2 |
tnIpv6Method(1)Static ip access, the default value is Static ip.
(2)dhcpv6 autoconfig.
(3)stateless autoconfig.
Use this OID to change the method of IP management access for the device.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.3.1.3 |
tnIpv6AddrGlobal IPv6 addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.3.1.4 |
tnIpv6prefixIPv6 prefix valuerw INTEGER .1.3.6.1.4.1.7483.6.10.1.3.1.5 |
tnIpv6DupAddrDetected(1)true: duplicate address detected
(2)false: no duplicate
Use this OID to get the status of IPv6 address for the device.ro Enumeration .1.3.6.1.4.1.7483.6.10.1.3.1.6 |
tnIpv6GwMethod(1)static gateway address defined by ipv6defaultGW node.
(2)route discovery.
Use this OID to change the method of gateway address for the device.
Default value is staticrw Enumeration .1.3.6.1.4.1.7483.6.10.1.3.1.7 |
tnIpv6defaultGWipv6 default gateway addressrw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.3.1.8 |
tnIpv6DynRouteTableThis entity's IPv6 dynamic routing table.rw SEQUENCE OF TnIpv6DynRouteEntry .1.3.6.1.4.1.7483.6.10.1.4 |
tnIpv6DynRouteEntryA particular route to a particular destination.
This table is specially for the result of route discovery
which is needed for stateless auto-configuration feature. TnIpv6DynRouteEntry .1.3.6.1.4.1.7483.6.10.1.4.1 |
tnIpv6DynRouteIndexThe Index value that identifies this route. Gauge32 .1.3.6.1.4.1.7483.6.10.1.4.1.1 |
tnIpv6DynRouteDestThe destination IP address of this route.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.4.1.2 |
tnIpv6DynRoutePfxLenIndicates the number of leading one bits that form the
mask to be logical-ANDed with the destination address
before being compared to the value in the
tnIpv6DynRouteDest field.ro Gauge32 .1.3.6.1.4.1.7483.6.10.1.4.1.3 |
tnIpv6DynRouteNextHopOn remote routes, the address of the next system en
route. For non-remote routes, a zero length string.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.4.1.4 |
tnIpv6DynRouteAgeThe number of seconds since this route was last updated
or otherwise determined to be correct. Note that no
semantics of 'too old' can be implied, except through
knowledge of the routing protocol by which the route
was learned.ro Gauge32 .1.3.6.1.4.1.7483.6.10.1.4.1.5 |
tnHostToIpTableTable of host name to IP mapping. SEQUENCE OF TnHostToIpEntry .1.3.6.1.4.1.7483.6.10.1.7 |
tnHostToIpEntryAn entry in the table, containing inforamtion
about a host name mapping to an IP address. TnHostToIpEntry .1.3.6.1.4.1.7483.6.10.1.7.1 |
tnHostToIpIndexIndex of DNS server table.ro Integer32 .1.3.6.1.4.1.7483.6.10.1.7.1.1 |
tnHostIPAddrTypeThe IP address type of the host.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.7.1.2 |
tnHostIPAddrThe IP address of the host.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.7.1.3 |
tnHostNameThe host name.rw DisplayString .1.3.6.1.4.1.7483.6.10.1.7.1.4 |
tnAliasNameThe alias name of the host.rw DisplayString .1.3.6.1.4.1.7483.6.10.1.7.1.5 |
tnEntryStatusFor a detailed description of this object, please refer to
SNMPv2-TC MIB.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.10.1.7.1.6 |
tnIPv4MgmtTableTable to manage IP status for each device. SEQUENCE OF TnIPv4MgmtEntry .1.3.6.1.4.1.7483.6.10.1.8 |
tnIPv4MgmtEntryAn entry containing IP status for each device. TnIPv4MgmtEntry .1.3.6.1.4.1.7483.6.10.1.8.1 |
tnIpv4InterfaceThe ifIndex for the IP interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.1 |
tnIPv4IndexIndex of server table.ro INTEGER .1.3.6.1.4.1.7483.6.10.1.8.1.2 |
tnIPv4ConfigModeThe status of DHCP client. The value of
set this value to dhcp(1) to enable DHCP client,
set this value to static(2) to enable static ip.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.8.1.3 |
tnIPv4OriginThe origin of the address.
For a detailed description of this type, please refer to IP-MIB.
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
dhcp(4) indicates an address that was assigned to this
system by a DHCP server.
other(1) indicates that the dhcp is processing or failedro IpAddressOriginTC (IP-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.4 |
tnIPv4AddrTypeThe IP address type of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.5 |
tnIPv4AddrThe IP address of the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.6 |
tnIPv4SubnetMaskThe subnet the ipAddr belongs to.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.7 |
tnIPv4DefaultGatewayThe default gateway for the device.
For a detailed description of this type, please refer to INET-ADDRESS-MIB.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.8.1.8 |
tnIPv4Status'Renew' restarts ipv4 interfaces the status changes to active/disable
depending on the success of the renew operation.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.8.1.9 |
tnIPv6MgmtTableTable of IPv6 status.ro SEQUENCE OF TnIPv6MgmtEntry .1.3.6.1.4.1.7483.6.10.1.9 |
tnIPv6MgmtEntryAn entry containing IPv6 status for each device.ro TnIPv6MgmtEntry .1.3.6.1.4.1.7483.6.10.1.9.1 |
tnIpv6InterfaceThe ifIndex for the IP interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.6.10.1.9.1.1 |
tnIPv6IndexIndex of server table.ro INTEGER .1.3.6.1.4.1.7483.6.10.1.9.1.2 |
tnIPv6OriginThe origin of the address.
For a detailed description of this type, please refer to IP-MIB.
manual(2) indicates that the address was manually configured
to a specified address, e.g., by user configuration.
linklayer(5) indicates an address created by IPv6 statelessro IpAddressOriginTC (IP-MIB) .1.3.6.1.4.1.7483.6.10.1.9.1.3 |
tnIPv6CfgMethod(1)link-local.
(2)auto stateless.
(3)auto state.
(4) manual
Use this OID to change the method of IP management access for the device.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.9.1.4 |
tnIPv6AddressTypeThe address type of ipAddressPrefix.ro Enumeration .1.3.6.1.4.1.7483.6.10.1.9.1.5 |
tnIPv6PrefixThe prefix associated with the this interface.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.9.1.6 |
tnIPv6PrefixLenThe length of the prefix (in bits).rw INTEGER .1.3.6.1.4.1.7483.6.10.1.9.1.7 |
tnIPv6AddressGlobal IPv6 address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.9.1.8 |
tnIPv6RouterAddripv6 default router address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.10.1.9.1.9 |
tnIPv6DupAddressDetected(1)true: duplicate address detected
(2)false: no duplicatero Enumeration .1.3.6.1.4.1.7483.6.10.1.9.1.10 |
tnIPv6ScopeScope value used to limit the scope of the address.
unicast address only have scopes of link or globalro Enumeration .1.3.6.1.4.1.7483.6.10.1.9.1.11 |
tnIPv6MTUMTU maximum transmission unit. Size (in bytes) of the largest protocol data unit.ro INTEGER .1.3.6.1.4.1.7483.6.10.1.9.1.12 |
tnIPv6LinkMTULink MTU maximum transmission unit. Size (in bytes) of the largest protocol data unit.ro INTEGER .1.3.6.1.4.1.7483.6.10.1.9.1.13 |
tnIPv6Status'Renew' restarts ipv6 interfaces. Active sets the status to enabled
Disable sets the status to disabled.rw Enumeration .1.3.6.1.4.1.7483.6.10.1.9.1.14 |