TN-VLAN-MGMT-MIB
AI MIB Summary
The TN-VLAN-MGMT-MIB facilitates the configuration and monitoring of Virtual LAN (VLAN) interfaces and Quality of Service (QoS) parameters on Nokia (formerly Alcatel-Lucent) Transport Network (TN) platforms. It exposes specific management objects for defining VLAN IDs, port memberships, traffic classes, and scheduling policies to enforce bandwidth allocation and service differentiation across optical transport equipment.
The mib module for managing VLAN and QoS in TN platform products.
Main OID:
tnVlanQoSMgmtMIB.1.3.6.1.4.1.7483.6.4
145
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
145 total| Object Name |
|---|
tnVlanQoSMgmtMIBThe mib module for managing VLAN and QoS in TN platform products. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.4 |
tnVlanQoSMgmtNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.0 |
tnIfSourceAddrChangeEvtA tnIfSourceAddrChangeEvt event is sent when the tnIfSourceAddrLock is set to 'true',
the ionIfSourceAddrLockAction is set to 'discardAndNotify' or 'all' and there is an
intrusion/SA change on this port. NOTIFICATION-TYPE .1.3.6.1.4.1.7483.6.4.0.1 |
tnVlanQoSMgmtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1 |
tnSysVlanMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.1 |
tnSysManagmentVLANTableManagement VLAN configuration table. SEQUENCE OF TnSysManagmentVLANEntry .1.3.6.1.4.1.7483.6.4.1.1.1 |
tnSysManagmentVLANEntryEach entry represents the management VLAN entry on a device. TnSysManagmentVLANEntry .1.3.6.1.4.1.7483.6.4.1.1.1.1 |
tnSysMgmtVLANStatusThe device if management VLAN capable, can enable the secure channel
for all its management traffic by setting this variable to enabled(1).rw Enumeration .1.3.6.1.4.1.7483.6.4.1.1.1.1.1 |
tnSysMgmtVLANIdThe VLAN id, that this device will use for its management traffic.
All Management frames to this device when 'tnSysManagmentVLANStatus'
is set to 'enabled(1)' must be tagged with this VLAN id and all
management frames from this device will be tagged with this VLAN id.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.1.1.1.2 |
tnSysMgmtMemberPortsThe ports on this device which are members of this Management VLAN.
This is for security, some ports can be made not a member, which blocks all
management access from this port.
Each bit in this variable represents the logical port number local to the device.rw Bits .1.3.6.1.4.1.7483.6.4.1.1.1.1.3 |
tnSysVLANExtTableSystem VLAN external configuration table. SEQUENCE OF TnSysVLANExtEntry .1.3.6.1.4.1.7483.6.4.1.1.2 |
tnSysVLANExtEntryEach entry represents the VLAN config on a device. TnSysVLANExtEntry .1.3.6.1.4.1.7483.6.4.1.1.2.1 |
tnSysVlanExtMgmtPortTypeThis mib variable is applicable for products that have a out of band management port.
This determines the Port type for all management traffic.It can be one of the following types:
Unaware, C-port, S-port, or S-custom-port where:
- Unaware: The management traffic is untagged or not management vlan.
- C-port: The management vlan is a C-Vlan and TPID 0x8100 is used for out of band management traffic.
- S-port: The management vlan is a S-Vlan and TPID 0x88a8 is used for out of band management traffic.
- S-custom-port: The management vlan is a S-Vlan, which use a custom TPID defined in tnSysVLANExtCustomSTag.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.1.2.1.1 |
tnSysVLANExtCustomSTagThis field specifies the Ether type used for Custom S-ports.
This is a global setting and is applicable for all Custom S-ports.
This field is used when TPID other than 0x8100 and 0x88a8 is needed for S-Tags.rw OCTET STRING .1.3.6.1.4.1.7483.6.4.1.1.2.1.2 |
tnVlanConfigGlobalsMainAccessVlans0To1KFirst quarter of bit-array indicating the enabled access VLANs.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.1.2.1.3 |
tnVlanConfigGlobalsMainAccessVlans1KTo2KSecond quarter of bit-array indicating the enabled access VLANs.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.1.2.1.4 |
tnVlanConfigGlobalsMainAccessVlans2KTo3KThird quarter of bit-array indicating the enabled access VLANs.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.1.2.1.5 |
tnVlanConfigGlobalsMainAccessVlans3KTo4KLast quarter of bit-array indicating the enabled access VLANs.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.1.2.1.6 |
tnDevSysPriorityMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.2 |
tnSwIPPrioTableIP Traffic class table. SEQUENCE OF TnSwIPPrioEntry .1.3.6.1.4.1.7483.6.4.1.2.1 |
tnSwIPPrioEntryEach entry represents the remapped value for each traffic class. TnSwIPPrioEntry .1.3.6.1.4.1.7483.6.4.1.2.1.1 |
tnSwIPPrioIndexThe IP traffic class remap table index. The indexing is for a bridge entityro INTEGER .1.3.6.1.4.1.7483.6.4.1.2.1.1.1 |
tnSwIPPrioTCThe IP traffic class value.ro INTEGER .1.3.6.1.4.1.7483.6.4.1.2.1.1.2 |
tnSwIPPrioRemapThe frames with IP traffic class set, will be remapped to the listed priority queues.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.2.1.1.3 |
tnSwIEEEPrioTableIEEE priority remapping table. SEQUENCE OF TnSwIEEEPrioEntry .1.3.6.1.4.1.7483.6.4.1.2.2 |
tnSwIEEEPrioEntryEach entry represents the remapped value for each priority class. TnSwIEEEPrioEntry .1.3.6.1.4.1.7483.6.4.1.2.2.1 |
tnSwIEEEPriorityThe IEEE tag priority bits in the frame.ro INTEGER .1.3.6.1.4.1.7483.6.4.1.2.2.1.1 |
tnSwIEEEPriorityRemapThe frames with IEEE priority bits set, will be mapped to the listed priority queues.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.2.2.1.2 |
tnInterfaceQoSMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.3 |
tnIfPriorityTableThis table has entries for interfaces which are capable of Priority management. SEQUENCE OF TnIfPriorityEntry .1.3.6.1.4.1.7483.6.4.1.3.1 |
tnIfPriorityEntryA entry in the table represents Priority configuration. TnIfPriorityEntry .1.3.6.1.4.1.7483.6.4.1.3.1.1 |
tnIfDefaultPriorityThe default priority for frames ingressing this port, if it doesnt have any
IEEE 802.3ac tag or any IP TOS/Diffserv traffic class fields.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.3.1.1.1 |
tnIfUseIEEEPriorityIf the frame is IEEE tagged, and this mib variable is set to 'true',
the 802.1p bits are used as the frames priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.3.1.1.2 |
tnIfUseIPPriorityIf the frame has IP TOS/Diffserv traffic class fields, and this mib variable is
set to 'true'. The traffic class fields will be used as the frame's priority.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.3.1.1.3 |
tnIfUseIPOrIEEEPriorityIf the frame has IP TOS/Diffserv traffic class fields, and IEEE 802.3ac tagged, then
this mib variable decides which one is to be considered as the frame's priority.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.3.1.1.4 |
tnIfSrcMACPriorityRemapWhen set to true(1), a frame's Source MAC address decides the priority of the frame.
The new priority value is assigned based on the priority assigned to that MAC address
in the MAC forwarding database.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.3.1.1.5 |
tnIfDstMACPriorityRemapWhen set to true(1), a frame's Destination MAC address decides the priority of the frame.
The new priority value is assigned based on the priority assigned to that MAC address
in the MAC forwarding database.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.3.1.1.6 |
tnIfVIDPriorityRemapWhen set to true(1), a frame's VLAN id decides the priority of the frame.
The new priority value is assigned based on the priority assigend to that VLAN id
in the VLAN database.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.3.1.1.7 |
tnIfPriorityRemapTableThis table has entries for each interface's IEEE priority remapping. SEQUENCE OF TnIfPriorityRemapEntry .1.3.6.1.4.1.7483.6.4.1.3.2 |
tnIfPriorityRemapEntryA entry in the table represents Priority remapping for an interface. TnIfPriorityRemapEntry .1.3.6.1.4.1.7483.6.4.1.3.2.1 |
tnIfUserPriorityThe priority found in the frames ingressing this interface.
Frames which are untagged take up the interface's priority.ro INTEGER .1.3.6.1.4.1.7483.6.4.1.3.2.1.1 |
tnIfRemappedPriorityThe frame's priority is remapped to this new priority value.
Frames that egress tagged will have the remapped priority.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.3.2.1.2 |
tnInterfaceVlanMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.4 |
tnIfVLANTableThis table has entries for interfaces which are VLAN capable. SEQUENCE OF TnIfVLANEntry .1.3.6.1.4.1.7483.6.4.1.4.1 |
tnIfVLANEntryA entry in the table represents VLAN configuration on an interface. TnIfVLANEntry .1.3.6.1.4.1.7483.6.4.1.4.1.1 |
tnIfDot1qStateThe IEEE802.1Q status of this interface.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.1.1.1 |
tnIfDiscardTaggedThis filters all tagged non-management frames ingressing this port.
All untagged and priority tagged frames are processed as normal frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.4.1.1.2 |
tnIfDiscardUntaggedThis filters all untagged and priority tagged non-management frames
ingressing this port. All frames .1Q tagged frames are processed as normal frames.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.4.1.1.3 |
tnIfDefaultVlanIdThe interface's default Vlan id. This VLAN id is given to untagged frames on ingress into
the device.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.4.1.1.4 |
tnIfForceDefaultVlanIdThis forces all untagged and (802.1Q)tagged frames to take up the interface's ionIfDefaultVlanId.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.4.1.1.5 |
tnIfVLANTagMgmtTableThis table has entries for interfaces which are VLAN capable. SEQUENCE OF TnIfVLANTagMgmtEntry .1.3.6.1.4.1.7483.6.4.1.4.2 |
tnIfVLANTagMgmtEntryA entry in the table represents VLAN configuration on an interface. TnIfVLANTagMgmtEntry .1.3.6.1.4.1.7483.6.4.1.4.2.1 |
tnIfFrameTagModeThe interface's taggin mode. The interface can be set as :
network(1) - This is the normal network mode. It can take untagged
and 802.3ac tagged frames. In this mode, 802.1q can be
enabled on the interface. Frames with an ethertype of
0x8100 is considered as tagged.
provider(2) - In provider mode, frames are considered
provider tagged if it matches the 'ionIfProviderEtherType'.
Frames which are ingress with a provider tag, are stripped
of their provider tag on egressing this interface.
If the frame's ethertype doesnt match the 'ionIfProviderEtherType'
it is as untagged.
customer(3) - The customer mode is a normal access port which is not 802.1Q aware.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.2.1.1 |
tnIfProviderEtherTypeThis ether type is used when an interface is set to 'provider' mode.
Frames are considered tagged only if the ether type matches this value.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.2.1.2 |
tnIfNetworkModeTaggingThis is available only when 'ionIfFrameTagMode' is set to 'network(1)' mode.
In unmodified(1) - Frames are unmodified, the egress the same as they ingress this interface
removeTag(2) - Tagged frames are stripped of their tag, and are transmitted untagged
addTag(3) - Untagged frames get tagged when they egress this interface.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.2.1.3 |
tnIfVLANTagMgmt2TableThis table has entries for interfaces which are VLAN capable. SEQUENCE OF TnIfVLANTagMgmt2Entry .1.3.6.1.4.1.7483.6.4.1.4.3 |
tnIfVLANTagMgmt2EntryA entry in the table represents VLAN configuration on an interface. TnIfVLANTagMgmt2Entry .1.3.6.1.4.1.7483.6.4.1.4.3.1 |
tnIfVLANTagMgmt2PortTypeA Port can be one of the following types: Unaware, C-port, S-port, or S-custom-port where:
- Unaware: all frames are classified to the Port VLAN ID and tags are not removed (default).
- C-port: Customer port; with Customer tags (C-Tags), which use TPID 0x8100.
- S-port: Service port; with Service tags (S-Tags), which use TPID 0x88A8 (IEEE 802.1ad).
- S-custom-port: Custom Service port; with Service tags (S-Tags), which use a custom TPID assigned
in tnSysVLANExtCustomSTag.
For Customer tags and Service tags, both VLAN tags (tags with non-zero VID) and Priority tags (tags with
VID = 0) are processed.
The tag header is either retrieved from a tag in the incoming frame or from a default port-based tag header.
The port-based tag header is configured in ieee8021QBridgePvid.
For double-tagged frames, there is an option to use the inner tag instead of the outer tag.
In addition to the tag header, the ingress port decides the number of VLAN tags to pop at egress. If the
configured number of tags to pop is greater than the actual number of tags in the frame, the number is
reduced to the actual number of tags in the frame.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.3.1.1 |
tnIfVLANTagMgmt2TxTagTypeDetermines egress tagging on a port:
- Untag_pvid - All frames with classified VLAN as the PVID egress as untagged frames.
- Tag_all - All frames which do not have a tag with classified vlan are tagged on egress.
An extra tag with ingress port PVID is added if the frames are already tagged.
- Untag_all - All frames tagged with the classified vlan id are untagged on egress.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.3.1.2 |
tnIfVLANTagMgmt2ConfigConflictsShows the status of Conflicts whether one exists or not. When a Volatile VLAN User requests to set VLAN
membership or VLAN port configuration, the following conflicts can occur:
- Functional Conflicts between features.
- Conflicts due to hardware limitation.
- Direct conflict between user modules.ro Enumeration .1.3.6.1.4.1.7483.6.4.1.4.3.1.3 |
tnVlanConfigInterfaceModeDetermines the underlying port mode.
Access ports are only members of one VLAN, the AccessVlan.
Trunk ports are by default members of all VLANs, which can be limited
with TrunkVlans.
Hybrid ports allow for changing all port VLAN parameters. As trunk
ports, hybrid ports are by default members of all VLANs, which can be
limited with HybridVlans.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.4.3.1.4 |
tnVlanConfigInterfaceAllowVlans0KTo1KFirst quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.5 |
tnVlanConfigInterfaceAllowVlans1KTo2KSecond quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.6 |
tnVlanConfigInterfaceAllowVlans2KTo3KThird quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.7 |
tnVlanConfigInterfaceAllowVlans3KTo4KLast quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.8 |
tnVlanConfigInterfaceForbiddenVlans0KTo1KFirst quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.9 |
tnVlanConfigInterfaceForbiddenVlans1KTo2KSecond quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.10 |
tnVlanConfigInterfaceForbiddenVlans2KTo3KThird quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.11 |
tnVlanConfigInterfaceForbiddenVlans3KTo4KLast quarter of bit-array indicating whether the port can ever become a
member of a VLAN ('0') or not ('1'). Used in all modes.rw TNVlanListQuarter .1.3.6.1.4.1.7483.6.4.1.4.3.1.12 |
tnVlanServiceMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.5 |
tnVlanServiceConnTypeThis defines the VLAN service type. The connection specified Port 1 and Port 2 configuration.
customerProvider(1) : This sets the Port 1 to be customer facing port and Port 2 to be provider facing port.
providerCustomer(2) : This sets the Port 1 to be provider facing port and Port 2 to be customer facing port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.5.1 |
tnVlanServiceVIDForTagThis Vlan id will be used when the service translation requires an extra tag to be added.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.5.2 |
tnVlanServiceEtherTypeForTagThis Ethertype will be used when the service translation requires an extra tag to be added.
Typical values are 0x8100 for IEEE 802.1Q tags, 0x88a8 for IEEE 802.1ad S-tags or other 2 byte private ethertype.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.5.3 |
tnVlanServiceTranslationThis determines the service or flow type between the two terminations.
The translation type as the flow passes the termination points from Customer edge to provider edge
are detailed below :
<- Provider Side -> <- Customer Side ->
Device
+
> | P | | P | >
> | o | | o | >
< | r | | r | <
< | t | | t | <
|(PE)| |(CE)|
+
noTranslation(1) :-
The ingress flow might contain any kind of frames, untagged or single or double tagged.
The egress flow will be exactly the same, no translation is done.
untaggedUntagged(2) :-
The traffic should be untagged, all tagged frames will be discarded.
The traffic that egress the device contain the untagged flow without any modification.
untaggedSingleTagged(3) :-
At the CE the traffic should be untagged.
At the PE the traffic will contain a single tag with the VID specified in tnVlanServiceVIDForTag.
singleTaggedSingleTagged(4) :-
The traffic should be single tagged on ingress and on egress with no translation.
singleTaggedTranslation(5) :-
The traffic should be single tagged on ingress and on egress.
The only changes from the singleTaggedSingleTagged(4), there is a translation.
The Vlan Id that came on ingress is translated to a different Vlan Id on egress.
singleTaggedDoubleTagged(6) :-
At the CE the traffic should be single tagged.
At the PE the traffic will contain an extra tag with the VID specified in tnVlanServiceVIDForTag.
doubleTaggedDoubleTagged(7) :-
The traffic should be double tagged on ingress and on egress with no translation.
doubleTaggedTranslation(8) :-
The traffic should be double tagged on ingress and on egress.
The only changes from the doubleTaggedDoubleTagged(7), there is a translation.
The Vlan Id in outer tag that came on CE is translated to a different Vlan Id on PE.
The inner tag remains intact.
addProviderTag(9) :-
This option adds an extra tag on the PE interface, no matter what kind of traffic at CE.
This strips the outer tag for traffic from PE interface egressing the CE interface.rw TnVlanServiceTranslationType .1.3.6.1.4.1.7483.6.4.1.5.4 |
tnVlanDbMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.6 |
tnVLANDbTableThis table contains all VLAN entries for this bridge. SEQUENCE OF TnVLANDbEntry .1.3.6.1.4.1.7483.6.4.1.6.1 |
tnVLANDbEntryA entry in the table represents a VLAN and the interfaces that are members of that VLAN. TnVLANDbEntry .1.3.6.1.4.1.7483.6.4.1.6.1.1 |
tnVlanDbVIDThe VLAN ID of the entry.ro VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.6.1.1.1 |
tnVlanDbFIDThe Forwarding Database number for this VLAN.ro INTEGER .1.3.6.1.4.1.7483.6.4.1.6.1.1.2 |
tnVlanDbVIDPriOverrideOverride Priority on frames assosicated with this VID.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.3 |
tnVlanDbVIDPriorityPriority for frames assosicated with this VID.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.6.1.1.4 |
tnVlanDbMemTagPort1Membership and Egress Tagging on Logical Port 1.
memEgressNoMode(1)- Port 1 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 1 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 1 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 1 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.5 |
tnVlanDbMemTagPort2Membership and Egress Tagging on Logical Port 2.
memEgressNoMode(1)- Port 2 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 2 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 2 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 2 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.6 |
tnVlanDbMemTagPort3Membership and Egress Tagging on Logical Port 3.
memEgressNoMode(1)- Port 3 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 3 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 3 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 3 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.7 |
tnVlanDbMemTagPort4Membership and Egress Tagging on Logical Port 4.
memEgressNoMode(1)- Port 4 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 4 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 4 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 4 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.8 |
tnVlanDbMemTagPort5Membership and Egress Tagging on Logical Port 5.
memEgressNoMode(1)- Port 5 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 5 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 5 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 5 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.9 |
tnVlanDbMemTagPort6Membership and Egress Tagging on Logical Port 6.
memEgressNoMode(1)- Port 6 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 6 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 6 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 6 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.10 |
tnVlanDbMemTagPort7Membership and Egress Tagging on Logical Port 7.
memEgressNoMode(1)- Port 7 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 7 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 7 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 7 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.11 |
tnVlanDbMemTagPort8Membership and Egress Tagging on Logical Port 8.
memEgressNoMode(1)- Port 8 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 8 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 8 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 8 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.12 |
tnVlanDbMemTagPort9Membership and Egress Tagging on Logical Port 9.
memEgressNoMode(1)- Port 9 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 9 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 9 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 9 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.13 |
tnVlanDbMemTagPort10Membership and Egress Tagging on Logical Port 10.
memEgressNoMode(1)- Port 10 is a member of this VLAN and frames
that egress are unmodified.
memEgressNoTag(2) - Port 10 is a member of this VLAN and frames
that egress are untagged.
memEgressTag(3) - Port 10 is a member of this VLAN and frames
that egress are tagged.
notMember(4) - Port 10 is not a member of this VLAN and frames
that ingress with this VID are discarded.
notApplicable(5) is returned if there is no valid port.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.1.1.14 |
tnVlanDbRowStatusThe status of this VLAN entry in the VLAN database.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.6.1.1.15 |
tnVLANDbFlush OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.6.2 |
tnVLANDbFlushOperationSet this viarable to:
flushAll(2): flush all VLAN entries except default VLAN 1.
This variable can't be set if the 'tnVLANDbFlushOperationStatus'
is 'inProgress(4)'.
Do getting to this variable:
If an operation is being processed, the operation being processed is returned.
If no operation is being processed, 'doNothing(1)' is returned.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.6.2.1 |
tnVLANDbFlushOperationStatusThe VLAN database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress.ro Enumeration .1.3.6.1.4.1.7483.6.4.1.6.2.2 |
tnVLANDbFlushOperationFailureReasonSpecifies the description of the cause of 'failure(3)' state of the
object 'tnVLANDbFlushOperationStatus'. This object would be a null
string if value of 'tnVLANDbFlushOperationStatus' is anything other
than 'failure(3)'.ro DisplayString .1.3.6.1.4.1.7483.6.4.1.6.2.3 |
tnFIDDbMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.7 |
tnFIDDbTableThe forwarding/filtering address database for this device. SEQUENCE OF TnFIDDbEntry .1.3.6.1.4.1.7483.6.4.1.7.1 |
tnFIDDbEntryInformation about a particular MAC address. TnFIDDbEntry .1.3.6.1.4.1.7483.6.4.1.7.1.1 |
tnFIDDbIDThe Forwarding Database Number. This identifies the database.ro INTEGER .1.3.6.1.4.1.7483.6.4.1.7.1.1.2 |
tnFIDDbMacAddressThe unicast or multicast MAC address that the device has forwarding information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.7.1.1.3 |
tnFIDDbConnPortThe index of the logical Port from which the device received the 'tnFIDDbMacAddress'.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.7.1.1.4 |
tnFIDDbPriorityThe priority of this MAC entry.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.7.1.1.5 |
tnFIDDbEntryTypeThe Entry state of this unicast or multicast entry.
The types represent :
static(1) - A Valid entry that doesnot age.
staticNRL(2) - A static entry that has no ingress rate limiting.
staticPA(3) - A static entry that has priority override enabled.
dynamic(4) - A valid entry with no special attributes which
ages and finally removed from the database.
A unicast entry can be static(1) or staticPA(3) but not
staticNRL(2). For MAC address which are learned, the read-only value
of dynamic(4) is returned.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.7.1.1.6 |
tnFIDDbEntryStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.7.1.1.7 |
tnFIDDbFlush OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.7.2 |
tnFIDDbFlushFIDWhen 'tnFIDDbFlushOperation' is 'flushAllFID(3)' or 'flushAllDynamicFID(4)',
the value(1..4094) of this viarable is used to specify the FID to be flushed.
The value 0 of this virable means no FID is specified.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.7.2.1 |
tnFIDDbFlushOperationSet this viarable to:
flushAll(2): flush all FID entries for all FIDs.
flushAllDynamic(3): flush all FID dynamic entries for all FIDs.
flushAllFID(4): flush all FID entries for one FID which is specified
by ionFIDDbFlushFID.
flushAllDynamicFID(5): flush all FID dynamic entries for one FID which
is specified by ionFIDDbFlushFID.
This variable can't be set if the 'ionFIDDbFlushOperationStatus'
is 'inProgress(4)'.
Do getting to this variable:
If an operation is being processed, the operation being processed is returned.
If no operation is being processed, 'doNothing(1)' is returned.rw Enumeration .1.3.6.1.4.1.7483.6.4.1.7.2.2 |
tnFIDDbFlushOperationStatusThe FID database flush operation status.
unknown(1): no flush operation has been performed.
success(2)/failure(3): the last flush operation is finished, success(2)
indicates the last flush operation is successful. failure(3)
indicates the last flush operation fails.
inProgress(4): flush operation is in progress.ro Enumeration .1.3.6.1.4.1.7483.6.4.1.7.2.3 |
tnFIDDbFlushOperationFailureReasonSpecifies the description of the cause of 'failure(3)' state of the
object 'ionFIDDbFlushOperationStatus'. This object would be a null
string if value of 'ionFIDDbFlushOperationStatus' is anything other
than 'failure(3)'.ro DisplayString .1.3.6.1.4.1.7483.6.4.1.7.2.4 |
tnVclMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.8 |
tnVclMacBasedMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.8.1 |
tnVclMacBasedTableThis table is used to control MAC based Vlan functions. SEQUENCE OF TnVclMacBasedEntry .1.3.6.1.4.1.7483.6.4.1.8.1.1 |
tnVclMacBasedEntryA entry in the table is used to control MAC based Vlan functions. TnVclMacBasedEntry .1.3.6.1.4.1.7483.6.4.1.8.1.1.1 |
tnVclMacBasedMacAddrThe MAC address is used for the MAC based VLAN function classification key. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.8.1.1.1.1 |
tnVclMacBasedVlanIdThe Vlan Id will be assigned to the incoming frame(if needed) which matches this specific MAC address and port member list.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.1.1.1.2 |
tnVclMacBasedPortMemberThe member port list of this specific MAC based Vlan match process takes place.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.1.1.1.3 |
tnVclMacBasedUserThe creater of this entry. The MAC based VLAN entry is either created by user configuration(static), or by NAS dynamic creation(nas).ro Enumeration .1.3.6.1.4.1.7483.6.4.1.8.1.1.1.4 |
tnVclMacBasedRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.8.1.1.1.5 |
tnVclProtoBasedMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.8.2 |
tnVclProtoBasedGroupMapTableThis table is used to build a specific protocol group for VCL match process. SEQUENCE OF TnVclProtoBasedGroupMapEntry .1.3.6.1.4.1.7483.6.4.1.8.2.1 |
tnVclProtoBasedGroupMapEntryA entry in this table is used to build a specific protocol group for VCL match process. TnVclProtoBasedGroupMapEntry .1.3.6.1.4.1.7483.6.4.1.8.2.1.1 |
tnVclProtoBasedGroupMapNameThe locally arbitrary, but unique identifier associated with this TnVclProtoBasedGroupMapEntry. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.1 |
tnVclProtoBasedGroupMapProtocolFrame Type can have one of the following values:
1. Ethernet
2. SNAP
3. LLCrw Enumeration .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.2 |
tnVclProtoBasedGroupMapEtherTypeValEthernet Type is valid only if the tnVclProtoBasedGroupMapProtocol is ethernet(1). Valid values for etype ranges is from 0x0600-0xffff.
If tnVclProtoBasedGroupMapProtocol is not ethernet(1), this value will be 0xffff instead.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.3 |
tnVclProtoBasedGroupMapSnapOuiSNAP OUI is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2). OUI (Organizationally Unique Identifier) is value in
format of xx-xx-xx where each pair (xx) in string is a hexadecimal value ranges from 0x00-0xff.
If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be FF-FF-FF instead.rw EightOTwoOui (DOT3-OAM-MIB) .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.4 |
tnVclProtoBasedGroupMapSnapPidSNAP PID is valid only if the tnVclProtoBasedGroupMapProtocol is snap(2).
If the OUI is hexadecimal 000000, the protocol ID is the Ethernet type (EtherType) field value for the protocol running on top of SNAP;
if the OUI is an OUI for a particular organization, the protocol ID is a value assigned by that organization to the protocol
running on top of SNAP.
In other words, if value of OUI field is 00-00-00 then value of PID will be etype (0x0600-0xffff) and
if value of OUI is other than 00-00-00 then valid value of PID will be any value from 0x0000 to 0xffff.
If tnVclProtoBasedGroupMapProtocol is not snap(2), this value will be 0xffff instead.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.5 |
tnVclProtoBasedGroupMapLlcDsapLLC DSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3).
DSAP: 1-byte long string (0x00-0xff).
If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.6 |
tnVclProtoBasedGroupMapLlcSsapLLC SSAP is valid only if the tnVclProtoBasedGroupMapProtocol is llc(3).
SSAP: 1-byte long string (0x00-0xff).
If tnVclProtoBasedGroupMapProtocol is not llc(3), this value will be 0xff instead.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.7 |
tnVclProtoBasedGroupMapRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.8.2.1.1.8 |
tnVclProtoBasedVlanMapTableThe table is used to associate the protocol based VLAN groups with VLAN paramaters. SEQUENCE OF TnVclProtoBasedVlanMapEntry .1.3.6.1.4.1.7483.6.4.1.8.2.2 |
tnVclProtoBasedVlanMapEntryA entry in this table is used to associate the protocol based VLAN groups with VLAN paramaters. TnVclProtoBasedVlanMapEntry .1.3.6.1.4.1.7483.6.4.1.8.2.2.1 |
tnVclProtoBasedVlanMapVlanIdThe Vlan Id will be assigned to the incoming frame(if needed) which matches this specific Protocol Group and port member list.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.2.2.1.1 |
tnVclProtoBasedVlanMapPortMemberThe member port list of this specific Protocol based Vlan match process takes place.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.2.2.1.2 |
tnVclProtoBasedVlanMapRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.8.2.2.1.3 |
tnVclIpSubnetBasedMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.1.8.3 |
tnVclIpSubnetBasedTableThis Table is used to control IP subnet based VLAN functions. SEQUENCE OF TnVclIpSubnetBasedEntry .1.3.6.1.4.1.7483.6.4.1.8.3.1 |
tnVclIpSubnetBasedEntryA entry in this table is used to control IP subnet based VLAN functions. TnVclIpSubnetBasedEntry .1.3.6.1.4.1.7483.6.4.1.8.3.1.1 |
tnVclIpSubnetBasedVceIdIndicates the index of the entry. The valid range is implement specific.
If VCE ID is 0, application will auto-generate the VCE ID for that entry. INTEGER .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.1 |
tnVclIpSubnetBasedIpAddrIndicates the IP address for match process.rw IpAddress .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.2 |
tnVclIpSubnetBasedMaskLenIndicates the network mask length.rw INTEGER .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.3 |
tnVclIpSubnetBasedVlanIdThe Vlan Id will be assigned to the incoming frame(if needed) which matches this specific IP subnet and port member list.rw VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.4 |
tnVclIpSubnetBasedPortMemberThe member port list of this specific IP subnet based Vlan match process takes place.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.5 |
tnVclIpSubnetBasedRowStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.4.1.8.3.1.1.6 |
tnVlanMQoSgmtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.4.2 |