TN-MVR-MIB
The TN-MVR-MIB module enables monitoring and configuration of Multicast VLAN Registration (MVR) parameters on Allied Telesis network switches, specifically tracking MVR group membership, port states, and multicast stream registration status to ensure efficient Layer 2 multicast delivery across VLAN boundaries.
Imported Objects
Objects
63 total| Object Name |
|---|
tnMVRMIBThe mib module is designed for Multicast VLAN Registration. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.50 |
tnMVRMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.50.1 |
tnMVRMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.50.2 |
tnMVRMIBMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.50.2.1 |
tnMVRModeTableThis table contains MVR mode configuration. SEQUENCE OF TNMVRModeEntry .1.3.6.1.4.1.7483.6.50.2.1.1 |
tnMVRModeEntryEach entry represents the MVR configuration on a device. TNMVRModeEntry .1.3.6.1.4.1.7483.6.50.2.1.1.1 |
tnMVRModeTo enable or disable the MVR on a device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.1.1.1 |
tnMVRStatisticsClearTrue for clearing statistics of MVR on a device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.1.1.2 |
tnMVRInterfaceTableThis table contains MVR VLAN interface settings. SEQUENCE OF TNMVRInterfaceEntry .1.3.6.1.4.1.7483.6.50.2.1.2 |
tnMVRInterfaceEntryEach entry represents a MVR interface on a device. TNMVRInterfaceEntry .1.3.6.1.4.1.7483.6.50.2.1.2.1 |
tnMVRVIDThe multicast vlan id of a MVR interface. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.2.1.1 |
tnMVRNameThe name of a MVR interface.rw DisplayString .1.3.6.1.4.1.7483.6.50.2.1.2.1.2 |
tnMVRInterfaceModeThe mode of a MVR interface, either dynamic or compatible.rw Enumeration .1.3.6.1.4.1.7483.6.50.2.1.2.1.3 |
tnMVRInterfaceTaggingSpecify whether the traversed IGMP/MLD control frames will be sent as Untagged or Tagged with MVR VID. The default is Tagged.rw Enumeration .1.3.6.1.4.1.7483.6.50.2.1.2.1.4 |
tnMVRInterfacePrioritySpecify how the traversed IGMP/MLD control frames will be sent in prioritized manner. The default Priority is 0.rw INTEGER .1.3.6.1.4.1.7483.6.50.2.1.2.1.5 |
tnMVRInterfaceLLQIDefine the maximum time to wait for IGMP/MLD report memberships on a receiver port before removing the port from multicast group membership. The value is in units of tenths of a seconds. The range is from 0 to 31744. The default LLQI is 5 tenths or one-half second.rw INTEGER .1.3.6.1.4.1.7483.6.50.2.1.2.1.6 |
tnMVRInactivePortListTo indicate the ports as inactive when the relative bits are set to 1.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.2.1.7 |
tnMVRSourcePortListTo indicate the ports as source when the relative bits are set to 1.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.2.1.8 |
tnMVRReceiverPortListTo indicate the ports as receiver when the relative bits are set to 1.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.2.1.9 |
tnMVRInterfaceRowStatusThe row status of MVR interface table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.2.1.10 |
tnMVRImmediateLeaveTableThis table contains the immediate leave setting of MVR. SEQUENCE OF TNMVRImmediateLeaveEntry .1.3.6.1.4.1.7483.6.50.2.1.3 |
tnMVRImmediateLeaveEntryEach entry represents MVR immediate leave on an interface. TNMVRImmediateLeaveEntry .1.3.6.1.4.1.7483.6.50.2.1.3.1 |
tnMVRImmediateLeaveEnabledEnable or disable immediate leave on each interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.3.1.1 |
tnMVRChannelConfigTableThis table contains MVR channel configuration. SEQUENCE OF TNMVRChannelConfigEntry .1.3.6.1.4.1.7483.6.50.2.1.4 |
tnMVRChannelConfigEntryEach entry represents a MVR channel configuration. TNMVRChannelConfigEntry .1.3.6.1.4.1.7483.6.50.2.1.4.1 |
tnMVRChannelVIDThe multicast vlan id of a mvr channel. This id should exist in tnMVRInterfaceTable. VlanIndex (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.4.1.1 |
tnMVRChannelStartEndAddrTypeThe address type of MVR channel starting and ending address. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.4.1.2 |
tnMVRChannelStartAddrThe starting ipv4/ipv6 multicast address of a MVR channel. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.4.1.3 |
tnMVRChannelEndAddrThe ending ipv4/ipv6 multicast address of a MVR channel.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.4.1.4 |
tnMVRChannelNameIndicate the name of the Channel of the specific Multicast VLAN. Maximum length of the Channel Name string is 32. Channel Name can only contain alphabets or numbers. Channel name should contain at least one alphabet. Channel name can be edited for the existing Channel entries or it can be added to the new entries.rw DisplayString .1.3.6.1.4.1.7483.6.50.2.1.4.1.5 |
tnMVRChannelRowStatusThe row status of MVR channel configuration table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.4.1.6 |
tnMVRStatisticsTableThis table contains the statistics of MVR. SEQUENCE OF TNMVRStatisticsEntry .1.3.6.1.4.1.7483.6.50.2.1.5 |
tnMVRStatisticsEntryEach entry represents the MVR statistics of a specific vlan id. TNMVRStatisticsEntry .1.3.6.1.4.1.7483.6.50.2.1.5.1 |
tnMVRStatisticsVIDThe multicast vlan id. INTEGER .1.3.6.1.4.1.7483.6.50.2.1.5.1.1 |
tnMVRIGMPQueriesRxThe number of Received Queries for IGMP.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.2 |
tnMVRMLDQueriesRxThe number of Received Queries for MLD.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.3 |
tnMVRIGMPQueriesTxThe number of Transmitted Queries for IGMP.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.4 |
tnMVRMLDQueriesTxThe number of Transmitted Queries for MLD.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.5 |
tnMVRIGMPv1JoinsRxThe number of Received IGMPv1 Joins.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.6 |
tnMVRIGMPv2ReportsRxThe number of Received IGMPv2 Reports.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.7 |
tnMVRMLDv1ReportsRxThe number of Received MLDv1 Reports.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.8 |
tnMVRIGMPv3ReportsRxThe number of Received IGMPv3 Reports.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.9 |
tnMVRMLDv2ReportsRxThe number of Received MLDv2 Reports.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.10 |
tnMVRIGMPv2LeavesRxThe number of Received IGMPv2 Leaves.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.11 |
tnMVRMLDv1LeavesRxThe number of Received MLDv1 Leaves.ro Unsigned32 .1.3.6.1.4.1.7483.6.50.2.1.5.1.12 |
tnMVRGroupInfoTableThis table contains MVR groups (channels) information. SEQUENCE OF TNMVRGroupInfoEntry .1.3.6.1.4.1.7483.6.50.2.1.6 |
tnMVRGroupInfoEntryEach entry represents the group information for a specific vlan id. TNMVRGroupInfoEntry .1.3.6.1.4.1.7483.6.50.2.1.6.1 |
tnMVRGroupVIDThe vlan id of a MVR group. INTEGER .1.3.6.1.4.1.7483.6.50.2.1.6.1.1 |
tnMVRGroupAddrTypeThe MVR group ip address type. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.6.1.2 |
tnMVRGroupAddrThe ipv4/ipv6 address of a MVR group. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.6.1.3 |
tnMVRGroupPortMembersTo indicate which port is under the current group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.50.2.1.6.1.4 |
tnMVRSFMTableThis table contains the SFM(Source-Filtered Multicast) information of MVR. SEQUENCE OF TNMVRSFMEntry .1.3.6.1.4.1.7483.6.50.2.1.7 |
tnMVRSFMEntryEach entry represents the SFM information for a specific vlan id. TNMVRSFMEntry .1.3.6.1.4.1.7483.6.50.2.1.7.1 |
tnMVRSFMVIDThe vlan id of a mvr group. INTEGER .1.3.6.1.4.1.7483.6.50.2.1.7.1.1 |
tnMVRSFMGroupAddrTypeThe ip address type of the mvr group. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.7.1.2 |
tnMVRSFMGroupAddrThe ipv4/ipv6 group address. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.7.1.3 |
tnMVRSFMIfIndexThe port number under the vlan and group. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.6.50.2.1.7.1.4 |
tnMVRSFMModeIndicates the filtering mode maintained per (VLAN ID, port number, Group Address) basis. It can be either Include or Exclude. Enumeration .1.3.6.1.4.1.7483.6.50.2.1.7.1.5 |
tnMVRSFMSourceAddrTypeThe address type of the source. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.7.1.6 |
tnMVRSFMSourceAddrIP Address of the source. Currently, system limits the total number of IP source addresses for filtering to be 128. When there is no source filtering address, the text None is shown in the Source Address field. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.50.2.1.7.1.7 |
tnMVRSFMTypeTo indicate the type of the SFM, either allow or deny.ro Enumeration .1.3.6.1.4.1.7483.6.50.2.1.7.1.8 |
tnMVRSFMHardwareFilterIndicates whether data plane destined to the specific group address from the source IPv4/IPv6 address could be handled by chip or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.50.2.1.7.1.9 |
tnMVRMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.50.3 |
More MIBs from Vitesse Semiconductor
Browse all Vitesse SemiconductorMIBs →The TROPIC-OPTICALPORT-MIB defines the managed object classes for monitoring and configuring optical transceiver parameters, including signal power levels, laser bias currents, and temperature, on Tropic Networks optical transport equipment. This module enables granular fault detection and performance analysis of physical layer optical interfaces by exposing standardized counters and gauges for link health validation.
The TROPIC-STATISTICS-MIB module monitors network traffic performance and anomaly detection thresholds on Tropic Networks devices by exposing raw packet counters, binned traffic distributions, and Traffic Condition Alarm (TCA) configuration parameters.
The TROPIC-SYSTEM-MIB provides standard SNMP access to Nokia network element system-level attributes, including device identity, uptime, contact information, and operational status. It enables centralized monitoring of core system health metrics such as CPU utilization, memory usage, and interface state transitions across TROPIC-based Nokia infrastructure.
The TROPIC-GENERIC-NOTIFICATION-MIB defines standard SNMP trap and inform PDU structures for Tropic Networks devices, enabling the transmission of critical operational events such as link state transitions, authentication failures, and hardware fault conditions to a management station. This module facilitates real-time alerting for network availability and security incidents by mapping vendor-specific events to generic notification objects within the Tropic ecosystem.
The TROPIC-GLOBAL-REG MIB module facilitates the monitoring and management of registration states, session counts, and subscriber lifecycle events on Nokia TROPIC (T1/T2) access gateways and aggregation platforms. It provides critical visibility into the operational status of user registration processes and associated resource utilization within the Nokia IP/MPLS and mobile backhaul infrastructure.
The TROPIC-PSD-MIB facilitates the monitoring and management of photonic service demarcation points on Tropic Networks optical transport equipment, specifically tracking service status, signal integrity, and interface performance metrics at the network edge.