TN-IPMC-SNOOPING-MIB
AI MIB Summary
The TN-IPMC-SNOOPING-MIB provides management access to proprietary IPMI over LAN (IPMC) session states and snooping configurations on network hardware. It enables monitoring of active IPMI discovery sessions, target IP addresses, and the operational status of IPMI proxy or snooping agents to ensure out-of-band management channel integrity.
The structure of IPMC snooping for the proprietary enterprise.
Main OID:
tnIpmcSnoopingMib.1.3.6.1.4.1.7483.6.115
74
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
tnIpmcSnoopingMibThe structure of IPMC snooping for
the proprietary enterprise. MODULE-IDENTITY .1.3.6.1.4.1.7483.6.115 |
tnIpmcSnoopingMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.1 |
tnIpmcSnoopingMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2 |
tnIpmcSnoopingMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1 |
tnSystemCfgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.1 |
tnSystemCfgTableTable contains System based configuration information
for Ipmc Snooping. SEQUENCE OF TnSystemCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.1.1 |
tnSystemCfgEntryAn entry is created for each active port in the device. TnSystemCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.1.1.1 |
tnIpmcSnoopingTypeThis object indicates whether IGMP or MLD Snooping has been
configued for the system. TnIpmcType .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.1 |
tnIpmcSnoopingEnabledThis object indicates whether IGMP or MLD Snooping has been
enabled for the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.2 |
tnIpmcSnoopingFloodingEnabledEnable unregistered IPMCv6 traffic flooding.
The flooding control takes effect only when IGMP or MLD Snooping
is enabled.When Ipmc Snooping is disabled, unregistered
IPMCv4 traffic flooding is always active in spite of this
setting.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.3 |
tnIpmcSnoopingLeaveProxyEnabledEnable Ipmc Leave proxy. This feature can be used to
avoid forwarding unnecessary leave messages to the
router side.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.4 |
tnIpmcSnoopingProxyEnabledEnable Ipmc proxy. This feature can be used to avoid
forwarding unnecessary join and leave messages to the
router side.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.5 |
tnIpmcSnoopingSsmRangeSSM (Source-Specific Multicast) Range allows the SSM-aware
hosts and routers run the SSM service model for the groups
in the address range.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.6 |
tnIpmcSnoopingSsmRangePrefixDenotes the length of a generic Internet network address
prefix.rw InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.7 |
tnIpmcSnoopingStatisticClearClears all Statistics counters.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.1.1.1.8 |
tnPortCfgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.2 |
tnPortCfgTableTable contains Port based configuration information
for Ipmc Snooping. SEQUENCE OF TnPortCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.2.1 |
tnPortCfgEntryAn entry is created for each active port in the device. TnPortCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.2.1.1 |
tnPortRoutePortEnabledSpecify which ports act as router ports. A router port
is a port on the Ethernet switch that leads towards the
Layer 3 multicast device or Ipmc querier. If an aggregation
member port is selected as a router port, the whole
aggregation will act as a router port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.2.1.1.1 |
tnPortFastLeaveEnabledEnable the fast leave on the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.2.1.1.2 |
tnPortThrottlingEnable to limit the number of multicast groups to which a
switch port can belong. The range is 1-10 for S3280.
0 means disabled.rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.2.1.1.3 |
tnVlanCfgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.3 |
tnVlanCfgTableTable contains VLAN based configuration information
for Ipmc Snooping. SEQUENCE OF TnVlanCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.3.1 |
tnVlanCfgEntryAn entry is created for each active VLAN in the device TnVlanCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.3.1.1 |
tnVlanIndexThis object indicates the VLAN in which Ipmc Snooping is
configured. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.1 |
tnVlanIpmcSnoopingEnabledWhen this object is set to 'true' Ipmc Snooping
is enabled on this VLAN else disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.2 |
tnVlanIpmcQuerierEnabledWhen this object is set to 'true' Ipmc Snooping
is enabled on this VLAN else disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.3 |
tnVlanIpmcCompatibilityCompatibility is maintained by hosts and routers taking
appropriate actions depending on the versions of IGMP or MLD operating
on hosts and routers within a network. The allowed selection
is IGMP or MLD-Auto, Forced IGMPv1 or MLDv1, Forced IGMPv2 or MLDv2,
Forced IGMPv3,default compatibility value is IGMP or MLD-Auto.rw Enumeration .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.4 |
tnVlanIpmcSnoopingRVRobustness Variable. The Robustness Variable allows tuning
for the expected packet loss on a network.
The allowed range is 1 to 255,default robustness variable
value is 2.rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.5 |
tnVlanIpmcSnoopingQIQuery Interval. The Query Interval is the interval between
General Queries sent by the Querier. The allowed range is
1 to 31744 seconds,default query interval is 125 seconds.rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.6 |
tnVlanIpmcSnoopingQRIQuery Response Interval. The Maximum Response Delay used to calculate
the Maximum Response Code inserted into the periodic General Queries.
The allowed range is 0 to 31744 in tenths of seconds, default query
response interval is 100 in tenths of seconds (10 seconds).rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.7 |
tnVlanIpmcSnoopingLLQILast Member Query Interval. The Last Member Query Time is the time value
represented by the Last Member Query Interval, multiplied by the Last Member
Query Count. The allowed range is 0 to 31744 in tenths of seconds, default
last member query interval is 10 in tenths of seconds (1 second).rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.8 |
tnVlanIpmcSnoopingURIUnsolicited Report Interval. The Unsolicited Report Interval is the time
between repetitions of a host's initial report of membership in a group.
The allowed range is 0 to 31744 seconds, default unsolicited report interval
is 1 second.rw Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.9 |
tnVlanIpmcRowStatusThis object indicates RowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.3.1.1.10 |
tnPortFilterCfgInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.4 |
tnPortFilterCfgTableTable contains VLAN based configuration information
for IGMP or MLD Snooping. SEQUENCE OF TnPortFilterCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.4.1 |
tnPortFilterCfgEntryAn entry is created for each active VLAN in the device TnPortFilterCfgEntry .1.3.6.1.4.1.7483.6.115.2.1.4.1.1 |
tnPortFilterIfIndexThis object indicates the Port in which IGMP or MLD Snooping is
configured. Unsigned32 .1.3.6.1.4.1.7483.6.115.2.1.4.1.1.1 |
tnPortFilterIpmcIpThis object indicates the IP group in which IGMP or MLD Snooping is
configured. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.4.1.1.2 |
tnPortFilterRowStatusThis object indicates RowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.4.1.1.3 |
tnPortStatusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.5 |
tnPortStatusTableTable contains Port based configuration information
for IGMP or MLD Snooping. SEQUENCE OF TnPortStatusEntry .1.3.6.1.4.1.7483.6.115.2.1.5.1 |
tnPortStatusEntryAn entry is created for each active port in the device TnPortStatusEntry .1.3.6.1.4.1.7483.6.115.2.1.5.1.1 |
tnPortStatusRouteEnabledDisplay which ports act as router ports. A router port is
a port on the Ethernet switch that leads towards the Layer 3
multicast device or IGMP or MLD querier. Static denotes the specific
port is configured to be a router port. Dynamic denotes the
specific port is learned to be a router port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.5.1.1.1 |
tnVlanStatisticInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.6 |
tnVlanStatisticTableThis contains information about the Ipmc snooping VLAN
statistic counter info table. SEQUENCE OF TnVlanStatisticEntry .1.3.6.1.4.1.7483.6.115.2.1.6.1 |
tnVlanStatisticEntryThis is an entry of the tnVlanStatisticTable. TnVlanStatisticEntry .1.3.6.1.4.1.7483.6.115.2.1.6.1.1 |
tnVlanStatisticVlanIDThis indicates the VLAN ID of the entry. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.1 |
tnVlanStatisticQuerierVersionThis indicates working querier version currently
in this VLAN.ro TnIpmcVersion .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.2 |
tnVlanStatisticHostVersionThis indicates working host version currently
in this VLAN.ro TnIpmcVersion .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.3 |
tnVlanStatisticQuerierStateThis indicates the querier status is 'ACTIVE' or 'IDLE'.
'DISABLED' denotes the specific interface is
administratively disabled.ro Enumeration .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.4 |
tnVlanStatisticQuerierTxThis indicates the count of transmitted IPMC Query
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.5 |
tnVlanStatisticQuerierRxThis indicates the count of transmitted IPMC Query
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.6 |
tnVlanStatisticV1ReportsRxThis indicates the count of received IGMPv1 or MLDv1 Query
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.7 |
tnVlanStatisticV2ReportsRxThis indicates the count of received IGMPv2 or MLDv2 Query
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.8 |
tnVlanStatisticV3ReportsRxThis indicates the count of received IGMPv3 Query
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.9 |
tnVlanStatisticLeavesRxThis indicates the count of received IPMC(IGMPv2 or MLDv1) Leaves
packets in this VLAN.ro Counter32 .1.3.6.1.4.1.7483.6.115.2.1.6.1.1.10 |
tnIpmcGroupInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.7 |
tnIpmcGroupTableTable containing multicast group address information for
IGMP or MLD Snooping. SEQUENCE OF TnIpmcGroupEntry .1.3.6.1.4.1.7483.6.115.2.1.7.1 |
tnIpmcGroupEntryAn entry is created by IGMP or MLD Snooping for each group learned
in the VLAN. TnIpmcGroupEntry .1.3.6.1.4.1.7483.6.115.2.1.7.1.1 |
tnIpmcGroupVlanIndexThis object indicates the VLAN in which the group is learned. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.115.2.1.7.1.1.1 |
tnIpmcGroupAddressThis object indicates IP multicast address learned by IGMP or MLD Snooping. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.7.1.1.2 |
tnIpmcGroupPortListThis object indicates the set of ports on which IPMC Membership Reports
are received for the group indicating interest to receive traffic sent
to the group.ro PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.115.2.1.7.1.1.3 |
tnIpmcSfmInfo OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.2.1.8 |
tnIpmcSfmTableTable containing multicast group address information for
IGMP or MLD Snooping. SEQUENCE OF TnIpmcSfmEntry .1.3.6.1.4.1.7483.6.115.2.1.8.1 |
tnIpmcSfmEntryAn entry is created by IPMC Snooping for each group learned in the VLAN. TnIpmcSfmEntry .1.3.6.1.4.1.7483.6.115.2.1.8.1.1 |
tnIpmcSfmVlanIndexThis object indicates the VLAN in which the group is learned. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.1 |
tnIpmcSfmInetAddressThis object indicates IP multicast address learned by IPMC Snooping. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.2 |
tnIpmcSfmPortThis object indicates the switch port number. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.3 |
tnIpmcSfmSrcAddressThis object indicates IP Address of the source. Currently,
system limits the total number of IP source addresses for
filtering to be 128. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.4 |
tnIpmcSfmModeThis object indicates the filtering mode maintained per
(VLAN ID, port number, Group Address) basis. It can be
either Include or Exclude.ro Enumeration .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.5 |
tnIpmcSfmSrcTypeThis object indicates the Type. It can be either Allow or Deny.ro Enumeration .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.6 |
tnIpmcSfmHardFilterThis object indicates Indicates whether data plane destined to the specific
group address from the source IP address could be handled by chip or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.7483.6.115.2.1.8.1.1.7 |
tnIpmcSnoopingMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.7483.6.115.3 |