TIMETRA-SECURITY-MIB
AI MIB Summary
The TIMETRA-SECURITY-MIB enables SNMP-based provisioning and monitoring of security configurations, including firewall policies, access control lists, and intrusion prevention settings, on Alcatel-Lucent Service Router Operating System (SROS) platforms.
This document is the SNMP MIB module to manage and provision Security features on Alcatel-Lucent SROS systems.
Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraSecurityMIBModule.1.3.6.1.4.1.6527.1.1.3.22
552
Objects
Active
Status
15
Dependencies
Imported Objects
Objects
552 total| Object Name |
|---|
timetraSecurityMIBModuleThis document is the SNMP MIB module to manage and provision
Security features on Alcatel-Lucent SROS systems.
Copyright 2003-2014 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.22 |
tmnxSecurityConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.22 |
tmnxSecurityCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.22.1 |
tmnxSecurityGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.22.2 |
tmnxSecurityObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22 |
tmnxUserProfileTableTable to store the user profiles for access to the commands
in the command line interface. SEQUENCE OF TmnxUserProfileEntry .1.3.6.1.4.1.6527.3.1.2.22.1 |
tmnxUserProfileEntryInformation about a single user profile. TmnxUserProfileEntry .1.3.6.1.4.1.6527.3.1.2.22.1.1 |
tmnxUserProfileThe name of the profile is the index to the table. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.1.1.1 |
tmnxUserProfileRowStatusRow Status for the user profile. The deletion of this row has
an action of removing the dependent rows in the
tmnxUserProfileTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.1.1.2 |
tmnxUserProfileDefaultActionThe action to be given to the user profile in case if none of
the entries match the command.rw TProfileAction .1.3.6.1.4.1.6527.3.1.2.22.1.1.3 |
tmnxUserProfileLiThe value of tmnxUserProfileLi specifies whether or this profile
can be assigned to a user to support Lawful Intercept (LI)
operations. This object can only be modified from the SNMPv3 'li'
context.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.1.1.4 |
tmnxUserProfileMatchTableTable which stores multiple entries per user profile to
define specific action to be taken in case if the command
matches the entry. SEQUENCE OF TmnxUserProfileMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.2 |
tmnxUserProfileMatchEntryInformation about a single user profile. TmnxUserProfileMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.2.1 |
tmnxUserProfileMatchIdThe Secondary index for the table Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.2.1.1 |
tmnxUserProfileMatchRowStatusRow Status for the user profile match.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.2.1.2 |
tmnxUserProfileMatchDescriptionUser-provided description for the match entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.2.1.3 |
tmnxUserProfileMatchActionAction to be used in case if a command matches this entry.rw TProfileAction .1.3.6.1.4.1.6527.3.1.2.22.2.1.4 |
tmnxUserProfileMatchStringMatch string to be used for this entry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.2.1.5 |
tmnxUserTabletmnxUserTable contains configuration information for the
system users. SEQUENCE OF TmnxUserEntry .1.3.6.1.4.1.6527.3.1.2.22.3 |
tmnxUserEntrytmnxUserEntry is an entry (conceptual row) in the tmnxUserEntry.
Each entry represents the configuration for a system user.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxUserRowStatus. TmnxUserEntry .1.3.6.1.4.1.6527.3.1.2.22.3.1 |
tmnxUserNameThe value of tmnxUserName specifies the name for a system user.
This name must be unique amongst the table entries. TNamedItem .1.3.6.1.4.1.6527.3.1.2.22.3.1.1 |
tmnxUserRowStatustmnxUserRowStatus controls the creation and deletion of
rows in the table.
To create a row in the tmnxUserTable, set tmnxUserRowStatus
to createAndGo(4). All objects will take on default values and
the agent will change tmnxUserRowStatus to active(1).
To delete a row in the tmnxUserTable, set tmnxUserRowStatus
to delete(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.2 |
tmnxUserPasswordThe value of tmnxUserPassword specifies the password used to
authenticate the user for console and FTP access.
tmnxUserPassword and tmnxUserPasswordEncrypted, which indicates
whether or not the password string is encrypted, must be set
together in the same SNMP request PDU or else the set request
will fail with an inconsistentValue error.
The value of tmnxUserPassword cannot be more than 20 characters
when the value of tmnxUserPasswordEncrypted is 'false'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.3.1.3 |
tmnxUserPasswordEncryptedWhen the value of tmnxUserPasswordEncrypted is 'true', the
password specified by tmnxUserPassword is in the encrypted
form.
When the value of tmnxUserPasswordEncrypted is 'false', the
password specified by tmnxUserPassword is in plain text.
tmnxUserPassword and tmnxUserPasswordEncrypted, which indicates
whether or not the password string is encrypted, must be set
together in the same SNMP request PDU or else the set request
will fail with an inconsistentValue error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.4 |
tmnxUserAccessThe value of tmnxUserAccess specifies the type of access the
the user is permitted. To allow the user access to the console,
FTP or SNMP, set the corresponding bit in tmnxUserAccess. Reset
the bit to deny the access.
'li' access allows this user to access CLI commands in the
Lawful Intercept (LI) context. The 'li' bit can only be modified
from the SNMPv3 'li' context.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.3.1.5 |
tmnxUserHomeDirectoryThe value of tmnxUserHomeDirectory specifies the local home
directory for the user for console and FTP access.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.3.1.6 |
tmnxUserRestrictedToHomeWhen the value of tmnxUserRestrictedToHome is 'true', the user
is not allowed to navigate to directories above his home
directory for file access.
When the value of tmnxUserRestrictedToHome is 'false', the user
is allowed access to directories above his home directory.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.7 |
tmnxUserConsoleLoginExecFileThe value of tmnxUserConsoleLoginExecFile specifies the file
that should be executed whenever the user successfully logs in
to a console session.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.3.1.8 |
tmnxUserConsoleCannotChangePswdWhen the value of tmnxUserConsoleCannotChangePswd is 'true',
the user does not have the privilege to change the password
for console and FTP login.
When the value of tmnxUserConsoleCannotChangePswd is 'false',
the user has the privilege to change the password for console
and FTP login.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.9 |
tmnxUserConsoleNewPswdAtLoginWhen the value of tmnxUserConsoleNewPswdAtLogin is 'true', the
will be forced to change his password at the next console or
FTP login.
When the value of tmnxUserConsoleNewPswdAtLogin is 'false', the
will not be forced to change his password at the next console
or FTP login.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.10 |
tmnxUserConsoleMemberProfile1The value of tmnxUserConsoleMemberProfile1 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.11 |
tmnxUserConsoleMemberProfile2The value of tmnxUserConsoleMemberProfile2 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.12 |
tmnxUserConsoleMemberProfile3The value of tmnxUserConsoleMemberProfile3 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.13 |
tmnxUserConsoleMemberProfile4The value of tmnxUserConsoleMemberProfile4 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.14 |
tmnxUserConsoleMemberProfile5The value of tmnxUserConsoleMemberProfile5 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.15 |
tmnxUserConsoleMemberProfile6The value of tmnxUserConsoleMemberProfile6 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.16 |
tmnxUserConsoleMemberProfile7The value of tmnxUserConsoleMemberProfile7 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.17 |
tmnxUserConsoleMemberProfile8The value of tmnxUserConsoleMemberProfile8 specifies a user
profile that the user has access to. This profile must be
a valid row entry in tmnxUserProfileTable.
Each user can access a maximum of 8 user profiles. The value
of the n-th user profile can be set only if all previous user
profiles (1 through (n-1)) are non-empty strings. The order of
the user profiles is important. The first user profile has
highest precedence, followed by the second and so on.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.3.1.18 |
tmnxUserAttemptedLoginsThe value of tmnxUserAttemptedLogins indicates the number of
times the user has attempted to login irrespective of whether
the login succeeded or failed.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.3.1.19 |
tmnxUserSuccessfulLoginsThe value of tmnxUserSuccessfulLogins indicates the number of
times the user has successfully logged in.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.3.1.20 |
tmnxUserPasswordChangedThe value of tmnxUserPasswordChanged indicates the value of
sysUpTime when the login password was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.3.1.21 |
tmnxMafObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.4 |
tmnxMafTableThis table has been replaced with tmnxGenMafTable. The new table
allows to define both IPv4 and IPv6 MAFs.
The tmnxMafTable has an entry for each Management Access Filter
(MAF) configured on the system. Management Access Filters are
used to restrict management of this Alcatel-Lucent SROS device by
other nodes outside either specific (sub)networks or through
designated ports. By default no Management Access Filters are
defined and this table will be empty.obsolete SEQUENCE OF TmnxMafEntry .1.3.6.1.4.1.6527.3.1.2.22.4.1 |
tmnxMafEntryEach row entry contains information about a Management Access
Filter (MAF).obsolete TmnxMafEntry .1.3.6.1.4.1.6527.3.1.2.22.4.1.1 |
tmnxMafNameThe value of tmnxMafName specifies the Management Access Filter
(MAF) represented by this row in the tmnxMafTable.obsolete TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.1.1.1 |
tmnxMafRowStatusThe tmnxMafRowStatus object is used to create and delete rows in
the tmnxMafTable. The values supported during a set operation are
createAndGo(4), createAndWait(5) and destroy(6).rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.1.1.2 |
tmnxMafDefaultActionThe value of tmnxMafDefaultAction specifies the default action
for management access in the absence of a specific management
access filter entry match. The default action is applied
to a packet that does not satisfy any match criteria in any of
the management access filter match entries. Before a MAF can be
active, a default action must have been specified.rwobsolete TmnxMafAction .1.3.6.1.4.1.6527.3.1.2.22.4.1.1.3 |
tmnxMafAdminStateThe value of tmnxMafAdminState specifies the administrative state
for this management access filter. A value of 'outOfService'
disables this filter which results in permitting all traffic.rwobsolete TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.1.1.4 |
tmnxMafMatchTableThis tables has been replaced with the table tmnxIPMafMatchTable
which allows for both IPv4 and IPv6 MAF entries.
The tmnxMafMatchTable contains filter match criteria associated
with Management Access Filters (MAFs) configured on the system.obsolete SEQUENCE OF TmnxMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.2 |
tmnxMafMatchEntryEach row entry contains information about a management access filter
entry associated with a specific Management Access Filter (MAF).
The filter criter is applied in order according to the value of
tmnxMafMatchIndex. The match algorithm is exited upon the first
match found and then the action specified is executed. For this
reason, entries must be sequenced from most to least explicit.
An entry where tmnxMafMatchAction has a value of 'none' is not
active.obsolete TmnxMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.2.1 |
tmnxMafMatchIndexThe value of tmnxMafMatchIndex specifies the Management Access Filter
Entry (MAFE) represented by this row in the tmnxMafMatchTable. It
is associated to a specific Management Access Filter by the value
of tmnxMafName index.obsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.1 |
tmnxMafMatchRowStatusThe tmnxMafMatchRowStatus object is used to create and delete rows in
the tmnxMafMatchTable. The values supported during a set operation
are createAndGo(4), createAndWait(5) and destroy(6).rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.2 |
tmnxMafMatchLastChangedThe value of tmnxMafMatchLastChanged is the timestamp of last
change to this row in tmnxMafMatchTable.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.3 |
tmnxMafMatchActionThe value of tmnxMafMatchAction specifies the action to be taken
when a packet matches the selection criteria configured in this
management access filter entry. Before a filter entry can be active,
tmnxMafMatchAction must be assigned some value other than 'none'.rwobsolete TmnxMafAction .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.4 |
tmnxMafMatchDescriptionThe value of tmnxMafMatchDescription is a user provided description
string for this Management Access Filter Entry. It can consist of
any printable, seven-bit ASCII characters up to 80 characters in
length.rwobsolete TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.5 |
tmnxMafMatchSrcIpAddrThe value of tmnxMafMatchSrcIpAddr specifies IP address used with
the value of tmnxMafMatchSrcIpMask to indicate a source IP address
range to be used as the match criteria for this Management Access
Filter Entry.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.6 |
tmnxMafMatchSrcIpMaskThe value of tmnxMafMatchSrcIpMask specifies the number of bits
to match of the source Ip Address.rwobsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.7 |
tmnxMafMatchSrcPortTypeThe value of tmnxMafMatchSrcPortType is used to restrict ingress
management packets to either the configured management Ethernet
port or any other logical port (LAG, port, or channel) on the
device. By default, management traffic is accepted on any interface.rwobsolete Enumeration .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.8 |
tmnxMafMatchSrcPortIdWhen tmnxMafMatchSrcPortType has a value of 'port' or 'lag' the
value of tmnxMafMatchSrcPortId specifies the port used to restrict
ingress management packets. A value of zero indicated that this
object is not initialized.rwobsolete TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.9 |
tmnxMafMatchDestPortThe value of tmnxMafMatchDestPort specifies a TCP or UDP port
number to be used as a match criteria in this Management Access
Filter Entry. A value of zero indicates that this object is
not initialized.rwobsolete TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.10 |
tmnxMafMatchDestPortMaskThe value of tmnxMafMatchDestPortMask specifies a mask to be used
when the value of tmnxMafMatchDestPort is not equal to zero.
The mask allows a range of TCP or UDP port values to be
specified for the match criteria in this Management Access Filter
Entry. A value of 65535, 0xFFFF, is used to indicate that
this object is not initialized.rwobsolete Unsigned32 (0|1..65535) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.11 |
tmnxMafMatchProtocolThe value of tmnxMafMatchProtocol specifies an IP protocol type
to be used in the match criteria for this Management Access Filter
Entry. Some well-know protocol numbers are TCP (6), and UDP (7).
The value of -1 is used to indicate that this object is not
initialized.rwobsolete TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.12 |
tmnxMafMatchCountThe value of tmnxMafMatchCount indicates the number of times
a management packet has matched this filter entry.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.13 |
tmnxMafMatchRouterThe value of tmnxMafMatchRouter specifies a router (VPRN) name or
a service-id, expressed as an ASCII numeric string, to be used in
the match criteria for the Management Access Filter Entry. The
empty string value ''H is used to indicate that this object is not
initialized.rwobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.14 |
tmnxMafMatchLogWhen the value of tmnxMafMatchLog is 'true', entry match logging
is enabled.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.2.1.15 |
tmnxGenMafTableLastChangedThis value of the object tmnxGenMafTableLastChanged indicates
the timestamp of the last change to the tmnxGenMafTable.
A value of 0 indicates that no changes were made to this table
since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.3 |
tmnxGenMafTableThis table replaces the tmnxMafTable. It allows to define both
IPv4 and IPv6 MAFs.
The tmnxGenMafTable has an entry for each Management Access Filter
(MAF) configured on the system (IPv4 and IPv6).
Management Access Filters are used to restrict management of this
Alcatel-Lucent SROS device by other nodes outside either specific
(sub)networks or through designated ports.
By default a single IPv4 and a single IPv6 Management Access Filter
is created by the system. No additional filters can be defined by the
operator.
When a filter is deleted, the system will re-create it with all
default settings. SEQUENCE OF TmnxGenMafEntry .1.3.6.1.4.1.6527.3.1.2.22.4.4 |
tmnxGenMafEntryEach row entry contains information about a IPv4 or IPv6
Management Access Filter (MAF). TmnxGenMafEntry .1.3.6.1.4.1.6527.3.1.2.22.4.4.1 |
tmnxGenMafTypeThe value of tmnxGenMafType specifies the type of packets, destined
for CPM, this management access filter applies to. TmnxMafType .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.1 |
tmnxGenMafNameThe value of tmnxGenMafName specifies the Management Access Filter
(MAF) represented by this row in the tmnxGenMafTable. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.2 |
tmnxGenMafLastModifiedThe tmnxGenMafLastModified object indicates the timestamp of the
last change to this row. A value of zero indicates that this row was
not modified since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.3 |
tmnxGenMafRowStatusThe tmnxGenMafRowStatus object is used to create and delete rows in
the tmnxGenMafTable. The values supported during a set operation are
- active(1)
- createAndGo(4),
- createAndWait(5) which is treated in the same way as createAndGo(4)
- destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.4 |
tmnxGenMafAdminStateThe value of tmnxGenMafAdminState specifies the administrative state
for this management access filter. A value of 'outOfService'
disables this filter which results in permitting all traffic.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.5 |
tmnxGenMafDefaultActionThe value of tmnxGenMafDefaultAction specifies the default action
for management access in the absence of a specific management
access filter entry match. The default action is applied
to a packet that does not satisfy any match criteria in any of
the management access filter match entries. Before a MAF can be
active, a default action must have been specified.
The value denyHostUnreachable is not allowed for Mac Maf filters.rw TmnxMafAction .1.3.6.1.4.1.6527.3.1.2.22.4.4.1.6 |
tmnxMafIPMatchTableLastChangedThis value of the object tmnxMafIPMatchTableLastChanged indicates
the timestamp of the last change to the tmnxIPMafMatchTable.
A value of 0 indicates that no changes were made to this table
since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.5 |
tmnxIPMafMatchTableThis table replaces the tmnxMafMatchTable. It allows to define both
IPv4 and IPv6 MAF IP entries.
The tmnxIPMafMatchTable contains ipvx filter match criteria
associated with Management Access Filters (MAFs) configured on the
system. SEQUENCE OF TmnxIPMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.6 |
tmnxIPMafMatchEntryEach row entry contains information about a management access filter
entry associated with a specific Management Access Filter (MAF).
The filter criter is applied in order according to the value of
tmnxIPMafMatchIndex.
The match algorithm is exited upon the first
match found and then the action specified is executed. For this
reason, entries must be sequenced from most to least explicit.
An entry where tmnxIPMafMatchAction has a value of 'none' is not
active.
Rows can only be created for tmnxGenMafType's:
- ipv4 (1), and.
- ipv6 (2).
For mac Maf filters a dedicated table is provided
(tmnxMacMafMatchTable). TmnxIPMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.6.1 |
tmnxIPMafMatchIndexThe value of tmnxIPMafMatchIndex specifies the Management Access
Filter Entry (MAFE) represented by this row in the
tmnxIPMafMatchTable.
It is associated to a specific Management Access Filter by the value
of tmnxGenMafName index. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.1 |
tmnxIPMafMatchRowStatusThe tmnxIPMafMatchRowStatus object is used to create and delete rows
in the tmnxIPMafMatchTable. Following values are supported:
- active(1)
- createAndGo(4),
- createAndWait(5) which is treated in the same way as createAndGo(4)
- destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.2 |
tmnxIPMafMatchLastChangedThe value of tmnxIPMafMatchLastChanged is the timestamp of last
change to this row in tmnxIPMafMatchTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.3 |
tmnxIPMafMatchActionThe value of tmnxIPMafMatchAction specifies the action to be taken
when a packet matches the selection criteria configured in this
management access filter entry. Before a filter entry can be active,
tmnxIPMafMatchAction must be assigned some value other than 'none'.
The value denyHostUnreachable is not allowed.rw TmnxMafAction .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.4 |
tmnxIPMafMatchDescriptionThe value of tmnxIPMafMatchDescription is a user provided description
string for this Management Access Filter Entry. It can consist of
any printable, seven-bit ASCII characters up to 80 characters in
length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.5 |
tmnxIPMafMatchSrcIpAddrTypeThe value of tmnxIPMafMatchSrcIpAddrType specifies the type of
IP address stored in the object tmnxIPMafMatchSrcIpAddr.
If the value of tmnxGenMafType indicates 'ipv4' the only allowed
values for this object are 'unknown' or 'ipv4'.
If the value of tmnxGenMafType indicates 'ipv6' the only allowed
values for this object are 'unknown' or 'ipv6'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.6 |
tmnxIPMafMatchSrcIpAddrThe value of tmnxIPMafMatchSrcIpAddr specifies IP address used with
the value of tmnxIPMafMatchSrcIpMask to indicate a source IP address
range to be used as the match criteria for this Management Access
Filter Entry.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.7 |
tmnxIPMafMatchSrcIpMaskThe value of tmnxIPMafMatchSrcIpMask specifies the number of bits
to match of the source Ip Address.rw InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.8 |
tmnxIPMafMatchSrcPortTypeThe value of tmnxIPMafMatchSrcPortType is used to restrict ingress
management packets to either the configured management Ethernet
port or any other logical port (LAG, port, or channel) on the
device. By default, management traffic is accepted on any interface.
Reading the value of tmnxIPMafMatchSrcPortType when it is different
from 'any' will cause it to be recalculated based on the value of
tmnxIPMafMatchSrcPortId.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.9 |
tmnxIPMafMatchSrcPortIdWhen tmnxIPMafMatchSrcPortType is set to 'any' then the value of
tmnxIPMafMatchSrcPortId will be forced to 503316480 (INVALID_PORT).
When tmnxIPMafMatchSrcPortType is set to 'port' or 'lag' then the
value of tmnxIPMafMatchSrcPortId specifies the port used to restrict
ingress management packets.
When tmnxIPMafMatchSrcPortType is set to 'cpm' then the value of
tmnxIPMafMatchSrcPortId will be forced to 503316480 (INVALID_PORT).rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.10 |
tmnxIPMafMatchDestPortThe value of tmnxIPMafMatchDestPort specifies a TCP or UDP port
number to be used as a match criteria in this Management Access
Filter Entry. A value of zero indicates that this object is
not initialized.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.11 |
tmnxIPMafMatchDestPortMaskThe value of tmnxIPMafMatchDestPortMask specifies a mask to be used
when the value of tmnxIPMafMatchDestPort is not equal to zero.
The mask allows a range of TCP or UDP port values to be
specified for the match criteria in this Management Access Filter
Entry. A value of 65535, 0xFFFF, is used to indicate that
this object is not initialized.rw Unsigned32 (0|1..65535) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.12 |
tmnxIPMafMatchProtNxtHdrThe value of tmnxIPMafMatchProtNxtHdr specifies
for IPv4 MAF the IP protocol field, and for IPv6 the next header
type to be used in the match criteria for this Management Access
Filter Entry.
Some well-know protocol numbers are TCP (6), and UDP (7).
The value of -1 is used to indicate that this object is not
initialized.
The value of -2 is used to indicate udp/tcp protocol matchingrw TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.13 |
tmnxIPMafMatchCountThe value of tmnxIPMafMatchCount indicates the number of times
a management packet has matched this filter entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.14 |
tmnxIPMafMatchRouterThe value of tmnxIPMafMatchRouter specifies a router (VPRN) name or
a service-id, expressed as an ASCII numeric string, to be used in
the match criteria for the Management Access Filter Entry. The
empty string value ''H is used to indicate that this object is not
initialized.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.15 |
tmnxIPMafMatchFlowLabelThe value of tmnxIPMafMatchFlowLabel specifies the flow label
to be matched. When the value is '-1', no flow label matching
occurs.
This object is only meaningfull in case of an IPv6 MAF entry.
The value is ignored in IPv4 MAF entries.rw IPv6FlowLabel .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.16 |
tmnxIPMafMatchLogWhen the value of tmnxIPMafMatchLog is 'true', entry match logging
is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.17 |
tmnxIPMafMatchL4SrcPortThe value of tmnxIPMafMatchL4SrcPort specifies a TCP or UDP port
number to be used as a match criteria in this Management Access
Filter Entry. A value of zero indicates that this object is
not initialized.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.18 |
tmnxIPMafMatchL4SrcPortMaskThe value of tmnxIPMafMatchL4SrcPortMask specifies a mask to be used
when the value of tmnxIPMafMatchL4SrcPort is not equal to zero.
The mask allows a range of TCP or UDP port values to be
specified for the match criteria in this Management Access Filter
Entry. A value of 65535, 0xFFFF, is used to indicate that
this object is not initialized.rw Unsigned32 (0|1..65535) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.19 |
tmnxIPMafMatchFragmentWhen the value of tmnxIPMafMatchFragment is 'true', entry match fragmentation
is enabled.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.6.1.20 |
tmnxMafMacMatchTableLastChangedThis value of the object tmnxMafMacMatchTableLastChanged indicates
the timestamp of the last change to the tmnxMacMafMatchTable.
A value of 0 indicates that no changes were made to this table
since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.7 |
tmnxMacMafMatchTableThis table allows to define Mac Maf filter entries.
The tmnxMacMafMatchTable contains Mac filter match criteria
associated with Management Access Filters (MAFs) configured on the
system. SEQUENCE OF TmnxMacMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.8 |
tmnxMacMafMatchEntryEach row entry contains information about a management access filter
entry associated with a specific Mac Management Access Filter (MAF).
The filter criter is applied in order according to the value of
tmnxMacMafMatchIndex.
The match algorithm is exited upon the first
match found and then the action specified is executed. For this
reason, entries must be sequenced from most to least explicit.
An entry where tmnxMacMafMatchAction has a value of 'none' is not
active. TmnxMacMafMatchEntry .1.3.6.1.4.1.6527.3.1.2.22.4.8.1 |
tmnxMacMafMatchIndexThe value of tmnxMacMafMatchIndex specifies the Management Access
Filter Entry (MAFE) represented by this row in the
tmnxMacMafMatchTable.
It is associated to a specific Management Access Filter by the value
of tmnxGenMafType and tmnxGenMafName. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.1 |
tmnxMacMafMatchRowStatusThe tmnxMacMafMatchRowStatus object is used to create and delete rows
in the tmnxMacMafMatchTable. The values supported are
- active(1)
- createAndGo(4),
- createAndWait(5) which is treated in the same way as createAndGo(4)
- destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.2 |
tmnxMacMafMatchLastChangedThe value of tmnxMacMafMatchLastChanged indicates the timestamp of
the last change to this row in tmnxMacMafMatchTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.3 |
tmnxMacMafMatchActionThe value of tmnxMacMafMatchAction specifies the action to be taken
when a packet matches the selection criteria configured in this
management access filter entry. Before a filter entry can be active,
tmnxMacMafMatchAction must be assigned some value other than 'none'.
The value denyHostUnreachable is not allowed for this object.rw TmnxMafAction .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.4 |
tmnxMacMafMatchDescriptionThe value of tmnxMacMafMatchDescription specifies a user provided
description string for this Management Access Filter Entry.
It can consist of any printable, seven-bit ASCII characters up to 80
characters in length.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.5 |
tmnxMacMafMatchLogThe value of the object tmnxMacMafMatchLog specifies whether or not
logging is active for this filter entry.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.6 |
tmnxMacMafMatchFrameTypeThe value of tmnxMacMafMatchFrameType specifies the type of
mac frame for which we are defining this match criteria.rw TmnxMafMacFltrFrameType .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.7 |
tmnxMacMafMatchSvcIdThe value of the object tmnxMacMafMatchSvcId specifies the service-id
in which the packet is to be received for this entry to match.
A value of 0 indicates: any service.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.8 |
tmnxMacMafMatchDot1pValueThe value of the object tmnxMacMafMatchDot1pValue specifies
the IEEE 802.1p priority value for this MAC filter entry.
Use -1 to disable matching this filter criteria.rw Dot1PPriority (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.9 |
tmnxMacMafMatchDot1pMaskThe value of the object tmnxMacMafMatchDot1pMask specifies
the IEEE 802.1p priority mask value for this policy MAC filter entry.
Use zero to disable matching, use 7 to match everything.rw Dot1PPriorityMask (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.10 |
tmnxMacMafMatchDsapThe value of the object tmnxMacMafMatchDsap specifies the MAC DSAP
to match for this MAC filter entry. This object has no
significance if the object tmnxMacMafMatchFrameType is not set to
802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.11 |
tmnxMacMafMatchDsapMaskThe value of the object tmnxMacMafMatchDsapMask specifies the
MAC DSAP mask for this MAC filter entry.
This object has no significance if the object
tmnxMacMafMatchFrameType is not set to 802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.12 |
tmnxMacMafMatchSrcMACThe value of the object tmnxMacMafMatchSrcMAC specifies
the source MAC to match for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.13 |
tmnxMacMafMatchSrcMACMaskThe value of the object tmnxMacMafMatchSrcMACMask specifies
the source MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tmnxMacMafMatchSrcMAC.
A zero bit means ignore this bit, do not match. A one bit means
match this bit with tmnxMacMafMatchSrcMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.14 |
tmnxMacMafMatchDstMACThe value of the object tmnxMacMafMatchDstMAC specifies
the Destination MAC mask value for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.15 |
tmnxMacMafMatchDstMACMaskThe value of the object tmnxMacMafMatchDstMACMask specifies
the destination MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tmnxMacMafMatchDstMAC.
A zero bit means ignore this bit, do not match. a one bit means
match this bit with tmnxMacMafMatchDstMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.16 |
tmnxMacMafMatchEtherTypeThe value of the object tmnxMacMafMatchEtherType specifies the
Ethertype for this MAC filter entry. Use -1 to disable matching
by this criteria. This object has no significance if the object
tmnxMacMafMatchFrameType is not set to Ethernet_II.rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.17 |
tmnxMacMafMatchSnapOuiThe value of the object tmnxMacMafMatchSnapOui specifies the
MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what
to match. Matching can be disabled by the use of the value off(1).
This object has no significance if the object
tmnxMacMafMatchFrameType is not set to 802dot2SNAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.18 |
tmnxMacMafMatchSnapPidThe value of the object tmnxMacMafMatchSnapPid specifies the
MAC SNAP PID to match for this MAC filter entry. use -1 to
disable matching by this criteria. This object has no significance if
object tmnxMacMafMatchFrameType is not set to 802dot2SNAP.rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.19 |
tmnxMacMafMatchSsapThe value of the object tmnxMacMafMatchSsap specifies the
the MAC SSAP to match for this MAC filter entry. This object has no
significance if the object tmnxMacMafMatchFrameType is not set to
802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.20 |
tmnxMacMafMatchSsapMaskThe value of the object tmnxMacMafMatchSsapMask specifies the
MAC SSAP mask for this MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the
object tmnxMacMafMatchFrameType is not set to 802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.21 |
tmnxMacMafMatchCfmOpCodeOperThe value of the object tmnxMacMafMatchCfmOpCodeOper specifies which
type of opcode checking is to be performed.
If different fron none, more info is provided in the objects
tmnxMacMafMatchCfmOpCodeValue1 and tmnxMacMafMatchCfmOpCodeValue2.
This object has significance only if the object tmnxMacMafMatchFrameType
refers to either ieee802.1ag or Y1731.rw TOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.22 |
tmnxMacMafMatchCfmOpCodeValue1The value of the object tmnxMacMafMatchCfmOpCodeValue1 specifies a cfm
opcode. The value of this object is used as per the
description for tmnxMacMafMatchCfmOpCodeOper.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.23 |
tmnxMacMafMatchCfmOpCodeValue2The value of the object tmnxMacMafMatchCfmOpCodeValue2 specifies a cfm
opcode. The value of this object is used as per the
description for tmnxMacMafMatchCfmOpCodeOper.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.24 |
tmnxMacMafMatchCountThe value of tmnxMacMafMatchCount indicates the number of times
a management packet has matched this filter entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.4.8.1.25 |
tmnxPasswordInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.5 |
tmnxPasswordAgingNumber of days a user password is valid before the user must
change his password. If the value of tmnxPasswordAging
is set to '65535', password aging is disabled.rw Unsigned32 (1..500 | 65535) UNITS "Days" .1.3.6.1.4.1.6527.3.1.2.22.5.1 |
tmnxPasswordMinLengthThe minimum number of characters required in the password.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.5.2 |
tmnxPasswordComplexityThe complexity requirements for the passwords.
'alpha-numeric' - at least one numeric character must
be present in the password.
'mixed-case' - at least one upper and one lower case
character must be present in the password.
'special-character' - at least one non-alphanumeric
character must be present in the password.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.5.3 |
tmnxPasswordAttemptsCountThe maximum number of unsuccessful login attempts allowed
for a user. The value of tmnxPasswordAttemptsCount is used
with the value of tmnxPasswordAttemptsTime to find out if
the user is to be locked out for tmnxPasswordAttemptsLockoutPeriod.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.5.4 |
tmnxPasswordAttemptsTimeThis is used in conjunction with tmnxPasswordAttemptsCount
to find out if the user is to be locked out for
tmnxPasswordAttemptsLockoutPeriod.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.5.5 |
tmnxPasswordAttemptsLockoutPeriodThe number of minutes the user is locked out if the threshold
of unsuccessful login attempts has exceeded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.5.6 |
tmnxPasswordAuthenOrder1The most preferred method to authenticate and authorize a user.
If this method fails, the next method in the sequence identified by
tmnxPasswordAuthenOrder2 is used.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.5.7 |
tmnxPasswordAuthenOrder2The second method to authenticate and authorize a user.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.5.8 |
tmnxPasswordAuthenOrder3The least preferred method to authenticate and authorize a user.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.5.9 |
tmnxPasswordAuthenExitOnRejectIf the value of tmnxPasswordAuthenExitOnReject is set to 'true' and
if one of the AAA methods configured in tmnxPasswordAuthenOrder1,
tmnxPasswordAuthenOrder2, tmnxPasswordAuthenOrder3 sends a reject,
then the next method in the order will not be tried. If the value
of this object is set to 'false' and if one AAA method sends a
reject, the next AAA method will be attempted. If in this process,
all the AAA methods are exhausted, it will be considered as a
reject.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.5.10 |
tmnxAdminPasswordtmnxAdminPassword is used to configure the password which enables
a user to become a system administrator.
tmnxAdminPassword and tmnxAdminPasswordEncrypted, which indicates
whether or not the password string is encrypted, must be set
together in the same SNMP request PDU or else the set request
will fail with an inconsistentValue error.
The value of tmnxAdminPassword cannot be more than 20 characters
when the value of tmnxAdminPasswordEncrypted is 'false'.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.5.11 |
tmnxAdminPasswordEncryptedWhen the value of tmnxAdminPasswordEncrypted is 'true', the
password specified by tmnxAdminPassword is in the encrypted
form.
When the value of tmnxAdminPasswordEncrypted is 'false', the
password specified by tmnxAdminPassword is in plain text.
tmnxAdminPassword and tmnxAdminPasswordEncrypted, which indicates
whether or not the password string is encrypted, must be set
together in the same SNMP request PDU or else the set request
will fail with an inconsistentValue error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.5.12 |
tmnxPasswordHealthCheckWhen the value of tmnxPasswordHealthCheck is 'true', the
Radius servers configured in tmnxRadiusServerTable
and the 'TacPlus' servers configured in tmnxTacPlusServerTable will be
periodically monitored. Each server will be contacted
every 30 seconds. If in this process a server is found to
be unreachable, or a previously unreachable server starts responding,
based on the type of the server, a
TIMETRA-SYSTEM-MIB:radiusServerOperStatusChange or a
TIMETRA-SYSTEM-MIB:tacplusServerOperStatusChange trap will be sent.
When the value of tmnxPasswordHealthCheck is 'false', periodic
monitoring of the Radius and Tacplus servers is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.5.13 |
tmnxPasswordHealthCheckIntervalThe value of tmnxPasswordHealthCheckInterval specifies the polling
interval for Radius servers configured in tmnxRadiusServerTable
and the 'TacPlus' servers configured in tmnxTacPlusServerTable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.5.14 |
tmnxRadiusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.6 |
tmnxRadiusAdminStatusThe desired administrative status of the RADIUS protocol operation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.6.1 |
tmnxRadiusAccountingWhen the value of tmnxRadiusAccounting is set to 'TRUE',
RADIUS command accounting is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.2 |
tmnxRadiusAuthorizationWhen the value of tmnxRadiusAuthorization is set to 'TRUE',
RADIUS command authorization is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.3 |
tmnxRadiusRetryAttemptsNumber of attempts to retry contacting the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.4 |
tmnxRadiusTimeoutNumber of seconds to wait before timing out a RADIUS server.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.5 |
tmnxRadiusPortThe UDP port number on which to contact the RADIUS server.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.6 |
tmnxRadiusServerTableThe tmnxRadiusServerEntry has an entry for each RADIUS server.
The table can have up to a maximum of 5 entries. SEQUENCE OF TmnxRadiusServerEntry .1.3.6.1.4.1.6527.3.1.2.22.6.7 |
tmnxRadiusServerEntrytmnxRadiusServerEntry is an entry (conceptual row) in the
tmnxRadiusServerTable. Each entry represents the configuration
for a RADIUS server.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxRadiusServerRowStatus. TmnxRadiusServerEntry .1.3.6.1.4.1.6527.3.1.2.22.6.7.1 |
tmnxRadiusServerIndexThe unique value which identifies a specific radius server. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.1 |
tmnxRadiusServerAddressThe IP address of the RADIUS server.
tmnxRadiusServerAddress was made obsolete in 5.0 revision of
Alcatel-Lucent SROS series system. Radius servers are now
configured using tmnxRadiusServerInetAddress and
tmnxRadiusServerInetAddressType objects.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.2 |
tmnxRadiusServerSecretThe secret key associated with the RADIUS server. The value returned
by tmnxRadiusServerSecret is always an empty string.
The value of tmnxRadiusServerSecret cannot be set to an empty
string.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.3 |
tmnxRadiusServerOperStatusCurrent status of the RADIUS server.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.4 |
tmnxRadiusServerRowStatustmnxRadiusServerRowStatus controls the creation and deletion
of rows in the table.
To create a row in the tmnxRadiusServerTable,
set tmnxRadiusServerRowStatus to createAndGo(4). All objects will take
on default values and the agent will change tmnxRadiusServerRowStatus
to active(1).
To delete a row in the tmnxRadiusServerTable, set
tmnxRadiusServerRowStatus to delete(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.5 |
tmnxRadiusServerInetAddressTypeThe value of tmnxRadiusServerInetAddressType specifies the address
type of tmnxRadiusServerInetAddress address.
The value of tmnxRadiusServerInetAddressType can be either of
InetAddressType - 'ipv4' or InetAddressType - 'ipv6' or
InetAddressType - 'ipv6z'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.6 |
tmnxRadiusServerInetAddressThe value of tmnxRadiusServerInetAddress specifies the address of
the Radius server.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.22.6.7.1.7 |
tmnxRadiusSourceAddresstmnxRadiusSourceAddress is used to configure the source address of
the Radius packet. It should be a valid unicast address.
If this object is configured with the address of the router interface,
the Radius client uses it while making a request to the server.
If the address is not configured or is not the address of the one of
interfaces, the source address is based on the address of the Radius
server. If the server address is in-band, the client uses the system
ip address. If it is out-of-band, the source address is the address of
the management interface.
tmnxRadiusSourceAddress was made obsolete in the 4.0 revision of
Alcatel-Lucent SROS series systems. The source address of the Radius
packet can now be set by creating a tmnxSourceIPEntry for Radius
application in the tmnxSourceIPTable.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.22.6.8 |
tmnxRadiusConfiguredWhen the value of tmnxRadiusConfigured is set to 'false', all the
Radius objects under the tmnxRadiusInfo tree will be set to their
default values and all the rows in the tmnxRadiusServerTable will be
removed. The value of this object will be set to 'true' if non-default
values are set to the Radius objects.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.9 |
tmnxRadiusPEDiscoveryThe value of tmnxRadiusPEDiscovery specifies whether RADIUS provider
edge discovery is enabled for VPLS services.
This object was made obsolete in release 5.0.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.10 |
tmnxRadiusPEDiscoveryPasswordThe value of tmnxRadiusPEDiscoveryPassword is used when contacting the
RADIUS server for VPLS auto-discovery.
This object was made obsolete in release 5.0.rwobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.6.11 |
tmnxRadiusPEDiscoveryIntervalThe value of tmnxRadiusPEDiscoveryInterval specifies the polling
interval for Radius PE discovery in minutes.
This object was made obsolete in release 5.0.rwobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.12 |
tmnxRadiusPEForceDiscoveryWhen tmnxRadiusPEForceDiscovery is set to 'doAction', the RADIUS
server is immediately contacted to attempt discovery.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.6.13 |
tmnxRadiusPEForceDiscoverySvcIdThe value of tmnxRadiusPEForceDiscoverySvcId specifies a specific
service ID to query the RADIUS server about.
Reading this object returns the value 0.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.14 |
tmnxRadiusAccountingPortThe UDP port number on which to contact the RADIUS server for
accounting requests.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.15 |
tmnxRadiusUseTemplateThe value of tmnxRadiusUseTemplate specifies whether
the RADIUS user template is actively applied to the
RADIUS user if no VSAs are returned with the auth-accept
from the RADIUS server. When the value of
tmnxRadiusUseTemplate is set to 'TRUE', the RADIUS user
template is actively applied if no VSAs are returned with
the auth-accept from the RADIUS server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.6.16 |
tmnxRadiusAuthAlgorithmThe value of tmnxRadiusAuthAlgorithm specifies the algorithm used to
select a RADIUS server from the list of configured servers
(tmnxRadiusServerTable).rw TmnxSecRadiusServAlgorithm .1.3.6.1.4.1.6527.3.1.2.22.6.17 |
tmnxRadiusUserStatsTableThe tmnxRadiusUserStatsTable is the radius server statistics per user
using specific policy.
Entries are created and deleted by the system. SEQUENCE OF TmnxRadiusUserStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.6.18 |
tmnxRadiusUserStatsEntryInformation about radius server statistics per user per policy. TmnxRadiusUserStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.6.18.1 |
tmnxRadiusPolicyNameThe tmnxRadiusPolicyName indicates the policy name used by the user
to access the radius server. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.1 |
tmnxRadiusUserServerIndexThe value of the tmnxRadiusUserServerIndex identifies a specific
radius server. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.2 |
tmnxRadiusUserReqTxThe tmnxRadiusUserReqTx indicates the number of requests sent to the
radius server from the user using this policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.3 |
tmnxRadiusUserReqRxThe tmnxRadiusUserReqRx indicates the number of requests received by
the radius server by the user using this policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.4 |
tmnxRadiusUserOpenFailThe tmnxRadiusUserOpenFail indicates the number of socket open
failures to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.5 |
tmnxRadiusUserBindFailThe tmnxRadiusUserReqTx indicates the number of socket bind failures to
the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.6 |
tmnxRadiusUserSendFailThe tmnxRadiusUserSendFail indicates the number of socket send
failures to the raidus server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.7 |
tmnxRadiusUserRecvFailThe tmnxRadiusUserRecvFail indicates the number of socket receive
failures to the raidus server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.8 |
tmnxRadiusUserSendTimeoutThe tmnxRadiusUserSendTimeout indicates the number of sends which
timed-out waiting for reply from the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.9 |
tmnxRadiusUserLoginPassThe tmnxRadiusUserLoginPass indicates the number of authentication
succeeded for the user using this policy to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.10 |
tmnxRadiusUserLoginFailThe tmnxRadiusUserLoginFail indicates the number of authentication
failed for the user using this policy to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.11 |
tmnxRadiusUserMd5FailThe tmnxRadiusUserMd5Fail indicates the number of times authentication
failed due to MD5 for the user using this policy to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.12 |
tmnxRadiusUserPendingThe tmnxRadiusUserPending indicates the number of requests pending
for the user using this policy to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.13 |
tmnxRadiusUserAcctReqTxThe tmnxRadiusUserAcctReqTx indicates the number of accounting requests
for the user using this policy to the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.14 |
tmnxRadiusUserAcctRejRxThe tmnxRadiusUserAcctRejRx indicates the number of accounting
rejections received for the user using this policy to the radius
server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.15 |
tmnxRadiusUserAcctConnErrorThe tmnxRadiusUserAcctConnError indicates the number of accounting
connection failures for the user using this policy to the radius
server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.16 |
tmnxRadiusUserAccChallengePktThe tmnxRadiusUserAccChallengePkt indicates the number of packets
which challenged access to the user-account from the radius server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.6.18.1.17 |
tmnxTacPlusInfo OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.7 |
tmnxTacPlusAdminStatusThe desired administrative status of the Tacacs+ protocol operation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.7.1 |
tmnxTacPlusTimeoutNumber of seconds to wait before timing out a Tacacs+ server.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.7.2 |
tmnxTacPlusServerTableThe tmnxTacPlusServerEntry has an entry for each Tacacs+ server.
The table can have up to a maximum of 5 entries. SEQUENCE OF TmnxTacPlusServerEntry .1.3.6.1.4.1.6527.3.1.2.22.7.3 |
tmnxTacPlusServerEntrytmnxTacPlusServerEntry is an entry (conceptual row) in the
tmnxTacPlusServerTable. Each entry represents the configuration
for a Tacacs+ server.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxTacPlusServerRowStatus. TmnxTacPlusServerEntry .1.3.6.1.4.1.6527.3.1.2.22.7.3.1 |
tmnxTacPlusServerIndexThe unique value which identifies a specific Tacacs+ server. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.1 |
tmnxTacPlusServerAddressThe IP address of the Tacacs+ server.
tmnxTacPlusServerAddress was made obsolete in 5.0 revision of
Alcatel-Lucent SROS series system. Tacacs+ servers are now configured
using tmnxTacPlusServerInetAddress and tmnxTacPlusServerInetAddressType
objects.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.2 |
tmnxTacPlusServerSecretThe secret key associated with the Tacacs+ server. The value returned
by tmnxTacPlusServerSecret is always an empty string.
The value of tmnxTacPlusServerSecret cannot be set to an empty
string.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.3 |
tmnxTacPlusServerRowStatustmnxTacPlusServerRowStatus controls the creation and
deletion of rows in the table.
To create a row in the tmnxTacPlusServerTable, set
tmnxTacPlusServerRowStatus to createAndGo(4). All objects will
take on default values and the agent will change
tmnxTacPlusServerRowStatus to active(1).
To delete a row in the tmnxTacPlusServerTable, set
tmnxTacPlusServerRowStatus to delete(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.4 |
tmnxTacPlusServerOperStatustmnxTacPlusServerOperStatus indicates the operational status
of the TACACS+ server.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.5 |
tmnxTacPlusServerInetAddressTypeThe value of tmnxTacPlusServerInetAddressType specifies the address
type of tmnxTacPlusServerInetAddress address.
The value of tmnxTacPlusServerInetAddressType can be either of
InetAddressType - 'ipv4' or InetAddressType - 'ipv6' or
InetAddressType - 'ipv6z'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.6 |
tmnxTacPlusServerInetAddressThe value of tmnxTacPlusServerInetAddress specifies the address of
the Tacplus server.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.7 |
tmnxTacPlusServerPortThe value of tmnxTacPlusServerPort specifies the TCP port on which to
contact the Tacplus server.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.7.3.1.8 |
tmnxTacPlusAccountingWhen the value of tmnxTacPlusAccounting is set to 'TRUE',
TACACS+ command accounting is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.4 |
tmnxTacPlusAcctRecTypetmnxTacPlusAcctRecType is used to configure the type of
accounting record packet that is to be sent to the TACACS+ server.
The value indicates whether TACACS+ accounting start and stop
packets be sent or just stop packets be sent. TACACS+ start packet
is sent whenever the user executes a command. A stop packet is sent
whenever the command execution is complete.
The default value for this object is 'stopOnly'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.7.5 |
tmnxTacPlusAuthorizationWhen the value of tmnxTacPlusAuthorization is set to 'TRUE',
TACACS+ command authorization is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.6 |
tmnxTacPlusSingleConnectionWhen the value of tmnxTacPlusSingleConnection is set to 'TRUE',
a single connection is established with the TACACS+ server.
The connection is kept open and is used by all the TELNET/SSH/FTP
sessions for AAA operations.
This object is obsoleted in release 8.0.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.7 |
tmnxTacPlusSourceAddresstmnxTacPlusSourceAddress is used to configure the source address of
the TACACS+ packet. It should be a valid unicast address.
If this object is configured with the address of the router interface,
the TACACS+ client uses it while making a request to the server.
If the address is not configured or is not the address of the one of
interfaces, the source address is based on the address of the TACACS+
server. If the server address is in-band, the client uses the system
ip address as the source address. If it is out-of-band, the source
address is the address of the management interface.
tmnxRadiusSourceAddress was made obsolete in the 4.0 revision of
Alcatel-Lucent SROS series systems. The source address of the TACACS+
packet can now be set by creating a tmnxSourceIPEntry for TACACS+
application in the tmnxSourceIPTable.rwobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.22.7.8 |
tmnxTacPlusConfiguredWhen the value of tmnxTacPlusConfigured is set to 'false', all the
Tacplus objects under the tmnxTacPlusInfo tree will be set to their
default values and all the rows in the tmnxTacPlusServerTable will be
removed. The value of this object will be set to 'true' if non-default
values are set to the 'TacPlus' objects.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.9 |
tmnxTacplusUseTemplateThe value of tmnxTacplusUseTemplate specifies whether
the TACACS+ user template is actively applied to the
TACACS+ user. When the value of tmnxTacplusUseTemplate
is set to 'TRUE', the TACACS+ user template is actively
applied.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.7.10 |
tmnxServerCtlObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.8 |
tmnxEnableServerstmnxEnableServers is used to enable/disable telnet, SSH, FTP,
and telnet v6 servers running on the system. By default, at
system startup, only SSH server will be enabled.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.8.1 |
tmnxTelnetServerOperStatustmnxTelnetServerOperStatus indicates the operational status of
the telnet server. If the value of this object changes, a generic trap
TIMETRA-SYSTEM-MIB:tmnxStateChange will be sent.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.8.2 |
tmnxSSHServerOperStatustmnxSSHServerOperStatus indicates the operational status of the SSH
server. If the value of this object changes, a generic trap
TIMETRA-SYSTEM-MIB:tmnxStateChange will be sent.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.8.3 |
tmnxFTPServerOperStatustmnxFTPServerOperStatus indicates the operational status of the FTP
server. If the value of this object changes, a generic trap
TIMETRA-SYSTEM-MIB:tmnxStateChange will be sent.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.8.4 |
tmnxTelnet6ServerOperStatusThe value of tmnxTelnet6ServerOperStatus indicates the operational
status of the IPv6 telnet server. If the value of this object
changes, a generic trap TIMETRA-SYSTEM-MIB:tmnxStateChange will be
sent.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.8.5 |
tmnxCpmSecurityObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.9 |
tmnxCpmPerPeerQueuingWhen tmnxCpmPerPeerQueuing is set to 'true', CPM hardware queuing
per peer is enabled. This means that when a peering session is
established, the router will automatically allocate a separate
CPM hardware queue for that peer. When tmnxCpmPerPeerQueuing is
set to 'false', CPM hardware queuing per peer is disabled.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.1 |
tmnxCpmQueuesTotalThe value of tmnxCpmQueuesTotal indicates the total number of
CPM hardware queues.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.2 |
tmnxCpmQueuesInUseThe value of tmnxCpmQueuesInUse indicates the number of CPM
hardware queues that are in use.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.3 |
tCpmFilterQueueTableThe tCpmFilterQueueTable has an entry for each CPM filter queue
configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmFilterQueueEntry .1.3.6.1.4.1.6527.3.1.2.22.9.4 |
tCpmFilterQueueEntryEach row entry represents a particular CPM Filter Queue. Entries
are created/deleted by user. Entries have a presumed
StorageType of nonVolatile. TCpmFilterQueueEntry .1.3.6.1.4.1.6527.3.1.2.22.9.4.1 |
tCpmFilterQueueIdThe value of tCpmFilterQueueId is used to index into the
tCpmFilterQueueTable. It uniquely identifies a CPM Queue
as configured on this system. TCpmFilterQueueId .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.1 |
tCpmFilterQueueRowStatusThe value of tCpmFilterQueueRowStatus specifies the row status. It
allows entires to be created or deleted in the tCpmFilterQueueEntry
table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.2 |
tCpmFilterQueueLastChangedThe value of tCpmFilterQueueLastChanged indicates the timestamp of
the last change to this row in tCpmFilterQueueTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.3 |
tCpmFilterQueueAdminPIRThe value of tCpmFilterQueueAdminPIR specifies the Peak
Information Rate associated with this queue.
This object can only be set to 1 or -1, when the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '8'.rw TPIRRate (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.4 |
tCpmFilterQueueAdminCIRThe value of tCpmFilterQueueAdminCIR specifies the Committed
Information Rate associated with this queue.
This object cannot be set when the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '8'.rw TCIRRate (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.5 |
tCpmFilterQueueCBSThe value of tCpmFilterQueueCBS specifies the Committed Burst
Excess associated with this queue.
This object cannot be set when the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '8'.rw TBurstSize (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.6 |
tCpmFilterQueueMBSThe value of tCpmFilterQueueMBS specifies the Maximum Burst
Size associated with this queue.rw TBurstSize (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.7 |
tCpmFilterQueueReferencesThe value of tCpmFilterQueueReferences indicates the count
of filter entries using this particular queue to forward
traffic to the main CPU.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.8 |
tCpmFilterQueueOperPIRThe value of tCpmFilterQueueOperPIR indicates the operational value
of the Peak Information Rate associated with this queue. This value
can be zero if the queue is not instantiated.ro TPIRRateOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.9 |
tCpmFilterQueueOperCIRThe value of tCpmFilterQueueOperCIR indicates the operational
value of the Committed Information Rate associated with this queue.ro TCIRRate (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.4.1.10 |
tmnxCpmHwFilterObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.9.5 |
tCpmFilterDefaultActionThe value of tCpmFilterDefaultAction specifies the action to
take for packets that do not match any filter entries.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw TCpmFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.22.9.5.1 |
tCpmIpFilterAdminStateThe value of tCpmIpFilterAdminState specifies the administrative
state of the CPM IPv4 filter.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.5.2 |
tCpmIPv6FilterAdminStateThe value of tCpmIPv6FilterAdminState specifies the administrative
state of the CPM IPv6 filter.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.5.3 |
tCpmMacFilterAdminStateThe value of tCpmMacFilterAdminState specifies the administrative
state of the CPM Mac filter.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.5.4 |
tCpmIpFilterTableThe tCpmIpFilterTable has an entry for each CPM IPv4 filter entry
configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmIpFilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.6 |
tCpmIpFilterEntryEach row entry represents a particular Cpm Filter match entry.
Every Cpm Filter can have zero or more Cpm Filter match entries.
A filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile. TCpmIpFilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.6.1 |
tCpmIpFilterEntryIdThe value of tCpmIpFilterEntryId is used to index into the
tCpmIpFilterTable. It uniquely identifies a CPM filter entry
as configured on this system. TEntryId .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.1 |
tCpmIpFilterEntryRowStatusThe value of tCpmIpFilterEntryRowStatus specifies the row status. It
allows entries to be created and deleted in the tCpmIpFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.2 |
tCpmIpFilterEntryLastChangedThe value of tCpmIpFilterEntryLastChanged indicates the timestamp of
the last change to this row in tCpmIpFilterTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.3 |
tCpmIpFilterEntryLogIdThe value of tCpmIpFilterEntryLogId specifies the log in which packets
matching this entry should be entered. The value zero indicates
that logging is disabled.rw TFilterLogId (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.4 |
tCpmIpFilterEntryDescriptionThe value of tCpmIpFilterEntryDescription specifies the user-provided
string describing this filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.5 |
tCpmIpFilterEntryActionThe value of tCpmIpFilterEntryAction specifies the action to take for
packets that match this filter entry. The value default(4) specifies
this entry to inherit the behavior defined as the default for the
filter in tCpmFilterDefaultAction.
The value queue(3) can only be specified if a valid queue id is entered
in tCpmIpFilterEntryQueueId.rw TCpmFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.6 |
tCpmIpFilterEntryQueueIdThe value of tCpmIpFilterEntryQueueId specifies which queue to put the
packet in when tCpmIpFilterEntryAction is queue (3).
If the value of tCpmIpFilterEntryAction is different from queue (3)
tCpmIpFilterEntryQueueId will be forced by the system to 0, and any
change attempt will be silently discarded.rw TCpmFilterQueueId .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.7 |
tCpmIpFilterEntrySrcIPAddrThe value of tCpmIpFilterEntrySrcIPAddr specifies the IP address to
match the source-ip of the packet.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.8 |
tCpmIpFilterEntrySrcIPMaskThe value of tCpmIpFilterEntrySrcIPMask specifies the IP Mask value
for this policy Cpm FilterEntry entry. The mask is ANDed with the IP
to match the tCpmIpFilterEntrySrcIPAddr.rw IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.9 |
tCpmIpFilterEntryDestIPAddrThe value of tCpmIpFilterEntryDestIPAddr specifies the IP address
to match the destination-ip of the packet.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.10 |
tCpmIpFilterEntryDestIPMaskThe value of tCpmIpFilterEntryDestIPMask specifies the IP Mask
value for this policy Cpm FilterEntry entry. The mask is ANDed
with the IP to match the tCpmIpFilterEntryDestIPAddr.rw IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.11 |
tCpmIpFilterEntryProtocolThe value of tCpmIpFilterEntryProtocol specifies the IP protocol
to match. It can be set to -1 to disable matching Cpm protocol. If
the protocol is changed, the protocol specific parameters are reset.
For instance, if protocol is changed from TCP to UDP, then the objects
tCpmIpFilterEntryTcpSyn and tCpmIpFilterEntryTcpAck will be turned
off.rw TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.12 |
tCpmIpFilterEntrySrcPortThe value of tCpmIpFilterEntrySrcPort specifies the TCP/UDP port to
match the source-port of the packet.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.13 |
tCpmIpFilterEntrySrcPortMaskThe value of tCpmIpFilterEntrySrcPortMask specifies the 16 bit mask
to be applied when matching tCpmIpFilterEntrySrcPort.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.14 |
tCpmIpFilterEntryDestPortThe value of tCpmIpFilterEntryDestPort specifies the TCP/UDP port to
match the destination-port of the packet.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.15 |
tCpmIpFilterEntryDestPortMaskThe value of tCpmIpFilterEntryDestPortMask specifies the 16 bit mask
to be applied when matching tCpmIpFilterEntryDestPort.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.16 |
tCpmIpFilterEntryDSCPThe value of tCpmIpFilterEntryDSCP specifies the DSCP to be
matched on the packet.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.17 |
tCpmIpFilterEntryFragmentThe value of tCpmIpFilterEntryFragment specifies whether fragment
matching is enabled. When enabled, this object matches
fragmented/unfragmented packets as per the value of the object.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.18 |
tCpmIpFilterEntryOptionPresentThe value of tCpmIpFilterEntryOptionPresent specifies whether IP
options matching is enabled. When enables, this object matches
packets if they have options present or not as per the value of
the object.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.19 |
tCpmIpFilterEntryIPOptionValueThe value of tCpmIpFilterEntryIPOptionValue specifies the
specific IP option to match.rw TIpOption (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.20 |
tCpmIpFilterEntryIPOptionMaskThe value of tCpmIpFilterEntryIPOptionMask specifies the mask
that is ANDed with the ip-option in the packet header before
being compared to tCpmIpFilterEntryIPOptionValue.rw TIpOption (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.21 |
tCpmIpFilterEntryMultipleOptionThe value of tCpmIpFilterEntryMultipleOption specifies whether
multiple options are to be matched as per the value of the object.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.22 |
tCpmIpFilterEntryTcpSynThe value of tCpmIpFilterEntryTcpSyn specifies whether a TCP Syn
packet should match.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.23 |
tCpmIpFilterEntryTcpAckThe value of tCpmIpFilterEntryTcpAck specifies whether a TCP Ack
packet should match.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.24 |
tCpmIpFilterEntryIcmpCodeThe value of tCpmIpFilterEntryIcmpCode specifies the ICMP code
to be matched. tCpmIpFilterEntryIcmpCode complements the object
tCpmIpFilterEntryIcmpType. Both of them need to be set to actually
enable ICMP Code matching. The value -1 means Icmp code matching is
disabled.rw Integer32 (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.25 |
tCpmIpFilterEntryIcmpTypeThe value of tCpmIpFilterEntryIcmpType specifies the ICMP type to
be matched. The value -1 means Icmp type matching is
disabled.rw Integer32 (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.26 |
tCpmIpFilterEntryVRtrIdThe value of tCpmIpFilterEntryVRtrId specifies the virtual router
ID to be matched. When the value is '0', no virtual router matching
occurs.rw TmnxVRtrIDOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.27 |
tCpmIpFilterEntryLogCreatedThe value of tCpmIpFilterEntryLogCreated indicates whether the
filter log for this filter entry has been instantiated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.28 |
tCpmIpFilterEntrySrcIpPrefixListThe value of the object tCpmIpFilterEntrySrcIpPrefixList specifies the
ip-prefix-list to be used as match criterion for the source ip address.
If the value of this object is empty the values of the objects
tCpmIpFilterEntrySrcIPAddr and tCpmIpFilterEntrySrcIPMask
will be used as src-ip match criterion.
The value specified for this object must correrspond to a prefix-list
defined in TIMETRA-FILTER-MIB::tFilterPrefixListTable.
When set to a non zero value, the value of the objects
tCpmIpFilterEntrySrcIPAddr and tCpmIpFilterEntrySrcIPMask
will set to their default values.
The value of those object will be set to its default value by the
system if a new (non default) value is provided for the objects
tCpmIpFilterEntrySrcIPAddr and tCpmIpFilterEntrySrcIPMask.
An attempt to set tCpmIpFilterEntrySrcIpPrefixList to a non-default
value in combination with setting any of tCpmIpFilterEntrySrcIPAddr or
tCpmIpFilterEntrySrcIPMask to (a) non-default value(s) is rejected by
the system.
Also, setting both tCpmIpFilterEntrySrcIpPrefixList and
tCpmIpFilterEntryDstIpPrefixList to non-default values is rejected by
the systemrw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.30 |
tCpmIpFilterEntryDstIpPrefixListThe value of the object tCpmIpFilterEntryDstIpPrefixList specifies the
ip-prefix-list to be used as match criterion for the destination
ip address.
If the value of this object is empty the values of the objects
tCpmIpFilterEntryDestIPAddr and tCpmIpFilterEntryDestIPMask
will be used as src-ip match criterion.
The value specified for this object must correrspond to a prefix-list
defined in TIMETRA-FILTER-MIB::tFilterPrefixListTable.
When set to a non zero value, the value of the objects
tCpmIpFilterEntryDestIPAddr and tCpmIpFilterEntryDestIPMask
will set to their default values.
The value of thos object will be set to its default value by the system
if a new (non default) value is provided for the objects
tCpmIpFilterEntryDestIPAddr and tCpmIpFilterEntryDestIPMask.
An attempt to set tCpmIpFilterEntryDstIpPrefixList to a non-default
value in combination with setting any of tCpmIpFilterEntryDestIPAddr or
tCpmIpFilterEntryDestIPMask to (a) non-default value(s) is rejected by
the system.
Also, setting both tCpmIpFilterEntryDstIpPrefixList and
tCpmIpFilterEntrySrcIpPrefixList to non-default values is rejected by
the systemrw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.6.1.31 |
tCpmIpFilterStatsTableThe tCpmIpFilterStatsTable has a stats entry for each entry in each
CPM filter configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmIpFilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.7 |
tCpmIpFilterStatsEntryEach row entry represents the statistics related to the
tCpmIpFilterEntry indexed by the same tCpmIpFilterEntryId. Entries
are created when tCpmIpFilterEntry rows are created. TCpmIpFilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.7.1 |
tCpmIpFilterStatsDroppedPktsThe value of tCpmIpFilterStatsDroppedPkts indicates
the number of packets dropped due to the tCpmIpFilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.7.1.1 |
tCpmIpFilterStatsForwardedPktsThe value of tCpmIpFilterStatsForwardedPkts indicates
the number of packets forwarded due to the tCpmIpFilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.7.1.2 |
tCpmFilterQueueStatsTableThe tCpmFilterQueueStatsTable has a stats entry for each CPM filter
queue configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmFilterQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.8 |
tCpmFilterQueueStatsEntryEach row entry represents the statistics related to the
tCpmFilterQueueEntry indexed by the same tCpmFilterQueueId.
Entries are created when tCpmFilterQueueEntry rows are created. TCpmFilterQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.8.1 |
tCpmFilterQInProfileDropPktsThe value of tCpmFilterQInProfileDropPkts indicates
the number of packets complying to the queue Qos profile dropped
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.1 |
tCpmFilterQInProfileFwdPktsThe value of tCpmFilterQInProfileFwdPkts indicates
the number of packets complying to the queue Qos profile forwarded
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.2 |
tCpmFilterQInProfileDropOctetsThe value of tCpmFilterQInProfileDropOctets indicates
the number of octets complying to the queue Qos profile dropped
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.3 |
tCpmFilterQInProfileFwdOctetsThe value of tCpmFilterQInProfileFwdOctets indicates
the number of octets complying to the queue Qos profile forwarded
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.4 |
tCpmFilterQOutProfileDropPktsThe value of tCpmFilterQOutProfileDropPkts indicates
the number of packets not complying to the queue Qos profile dropped
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.5 |
tCpmFilterQOutProfileFwdPktsThe value of tCpmFilterQOutProfileFwdPkts indicates
the number of packets not complying to the queue Qos profile forwarded
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.6 |
tCpmFilterQOutProfileDropOctetsThe value of tCpmFilterQOutProfileDropOctets indicates
the number of octets not complying to the queue Qos profile dropped
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.7 |
tCpmFilterQOutProfileFwdOctetsThe value of tCpmFilterQOutProfileFwdOctets indicates
the number of octets not complying to the queue Qos profile forwarded
from the tCpmFilterQueueEntry with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.8.1.8 |
tCpmIPv6FilterTableThe tCpmIPv6FilterTable has an entry for each CPM IPv6 filter entry
configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmIPv6FilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.9 |
tCpmIPv6FilterEntryEach row entry represents a particular CPM IPv6 filter match entry.
The CPM IPv6 Filter can have zero or more CPM IPv6 filter match
entries.
A filter entry with no match criteria set will match every packet, and
the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed StorageType of
nonVolatile. TCpmIPv6FilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.9.1 |
tCpmIPv6FilterEntryIdThe value of tCpmIPv6FilterEntryId is used to index into the
tCpmIPv6FilterTable. It uniquely identifies a CPM IPv6 filter entry
as configured on this system. TEntryId .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.1 |
tCpmIPv6FilterEntryRowStatusThe value of tCpmIPv6FilterEntryRowStatus specifies the row status. It
allows entries to be created and deleted in the tCpmIPv6FilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.2 |
tCpmIPv6FilterEntryLastChangedThe value of tCpmIPv6FilterEntryLastChanged indicates the timestamp of
the last change to this row in tCpmIPv6FilterTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.3 |
tCpmIPv6FilterEntryLogIdThe value of tCpmIPv6FilterEntryLogId specifies the log in which
packets matching this entry should be entered.
The value zero indicates that logging is disabled.rw TFilterLogId (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.4 |
tCpmIPv6FilterEntryDescriptionThe value of tCpmIPv6FilterEntryDescription specifies the
user-provided string describing this filter entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.5 |
tCpmIPv6FilterEntryActionThe value of tCpmIPv6FilterEntryAction specifies the action to take
for packets that match this filter entry. The value default(4)
specifies this entry to inherit the behavior defined as the default
for the filter in tCpmFilterDefaultAction.
The value queue(3) can only be specified if a valid queue id is entered
in tCpmIPv6FilterEntryQueueId.rw TCpmFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.6 |
tCpmIPv6FilterEntryQueueIdThe value of tCpmIPv6FilterEntryQueueId specifies which queue to put
the packet in when tCpmIPv6FilterEntryAction is queue (3).
If the value of tCpmIPv6FilterEntryAction is different from queue (3)
tCpmIPv6FilterEntryQueueId will be forced by the system to 0, and any
change attempt will be silently discarded.rw TCpmFilterQueueId .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.7 |
tCpmIPv6FilterEntrySrcIPAddrThe value of tCpmIPv6FilterEntrySrcIPAddr specifies the IPv6 address
to match the source IPv6 address in the packet.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.8 |
tCpmIPv6FilterEntrySrcIPMasktCpmIPv6FilterEntrySrcIPMask holds the IPv6 source address mask for
this IPv6 CPM filter entry. The mask specifies the bits to be compared
between tCpmIPv6FilterEntrySrcIPAddr and the IPv6 source address in
the packet.rw InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.9 |
tCpmIPv6FilterEntryDestIPAddrThe value of tCpmIPv6FilterEntryDestIPAddr specifies the IPv6 address
to match the destination IPv6 address in the packet.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.10 |
tCpmIPv6FilterEntryDestIPMasktCpmIPv6FilterEntryDestIPMask holds the IPv6 destination address mask
for this IPv6 CPM filter entry.
The mask specifies the bits to be compared between
tCpmIPv6FilterEntryDestIPAddr and the IPv6 destination address
in the packet.rw InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.11 |
tCpmIPv6FilterEntryNextHeaderThe value of tCpmIPv6FilterEntryNextHeader specifies the IPv6 protocol
to match. '-1' specifies that the matching has been disabled.
To change a protocol, the protocol specific values should be reset.
For instance, to change the protocol from TCP(6) to UDP(7),
the TCP specific attributes such as tCpmIPv6FilterEntryTcpSyn and
tCpmIPv6FilterEntryTcpAck should be reset.
Because the match criteria only pertains to the last next-header, the
following values are not accepted: 0, 43, 44, 50, 51, and 60.rw TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.12 |
tCpmIPv6FilterEntrySrcPortThe value of tCpmIPv6FilterEntrySrcPort specifies the TCP/UDP port to
match the source-port of the packet.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.13 |
tCpmIPv6FilterEntrySrcPortMaskThe value of tCpmIPv6FilterEntrySrcPortMask specifies the bits to be
compared between tCpmIPv6FilterEntrySrcPort and the TCP/UDP source
port in the packet.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.14 |
tCpmIPv6FilterEntryDestPortThe value of tCpmIPv6FilterEntryDestPort specifies the TCP/UDP port to
match the destination-port of the packet.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.15 |
tCpmIPv6FilterEntryDestPortMaskThe value of tCpmIPv6FilterEntryDestPortMask specifies the bits to be
compared between tCpmIPv6FilterEntryDestPort and the TCP/UDP source
port in the packet.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.16 |
tCpmIPv6FilterEntryDSCPThe value of tCpmIPv6FilterEntryDSCP specifies the DSCP to be
matched on the packet.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.17 |
tCpmIPv6FilterEntryTcpSynThe value of tCpmIPv6FilterEntryTcpSyn specifies whether a TCP Syn
packet should match.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.23 |
tCpmIPv6FilterEntryTcpAckThe value of tCpmIPv6FilterEntryTcpAck specifies whether a TCP Ack
packet should match.rw TItemMatch (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.24 |
tCpmIPv6FilterEntryIcmpCodeThe value of tCpmIPv6FilterEntryIcmpCode specifies the ICMP code
to be matched. tCpmIPv6FilterEntryIcmpCode complements the object
tCpmIPv6FilterEntryIcmpType. Both of them need to be set to actually
enable ICMP matching. The value '-1' means Icmp code matching is
disabled.rw Integer32 (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.25 |
tCpmIPv6FilterEntryIcmpTypeThe value of tCpmIPv6FilterEntryIcmpType specifies the ICMP type to
be matched. tCpmIPv6FilterEntryIcmpType complements the object
tCpmIPv6FilterEntryIcmpCode. Both of them need to be set to actually
enable ICMP matching. The value '-1' means Icmp type matching is
disabled.rw Integer32 (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.26 |
tCpmIPv6FilterEntryVRtrIdThe value of tCpmIPv6FilterEntryVRtrId specifies the virtual router
ID to be matched. When the value is '0', no virtual router matching
occurs.rw TmnxVRtrIDOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.27 |
tCpmIPv6FilterEntryLogCreatedThe value of tCpmIPv6FilterEntryLogCreated indicates whether the
filter log for this filter entry has been instantiated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.28 |
tCpmIPv6FilterEntryFlowLabelThe value of tCpmIPv6FilterEntryFlowLabel specifies the flow label
to be matched. When the value is '-1', no flow label matching
occurs.rw IPv6FlowLabel .1.3.6.1.4.1.6527.3.1.2.22.9.9.1.29 |
tCpmIPv6FilterStatsTableThe tCpmIPv6FilterStatsTable has a stats entry for each entry in each
CPM filter configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmIPv6FilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.10 |
tCpmIPv6FilterStatsEntryEach row entry represents the statistics related to the
tCpmIPv6FilterEntry indexed by the same tCpmIPv6FilterEntryId. Entries
are created when tCpmIPv6FilterEntry rows are created. TCpmIPv6FilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.10.1 |
tCpmIPv6FilterStatsDroppedPktsThe value of tCpmIPv6FilterStatsDroppedPkts indicates
the number of packets dropped due to the tCpmIPv6FilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.10.1.1 |
tCpmIPv6FilterStatsForwardedPktsThe value of tCpmIPv6FilterStatsForwardedPkts indicates
the number of packets forwarded due to the tCpmIPv6FilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.10.1.2 |
tmnxCpmProtPolTableLastChangedThe value of tmnxCpmProtPolTableLastChanged indicates the
sysUpTime at the time of the last modification of an entry in the
tmnxCpmProtPolTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.11 |
tmnxCpmProtPolTableThe tmnxCpmProtPolTable has an entry for each CPM Protection policy
configured in the system. There are two default policies.
CPM Protection policy (254) is the default Access CPM Protection
policy. CPM Protection policy (255) is the default Network CPM
Protection policy.
The default CPM Protection policies are created by the system,
and can be modified but cannot be destroyed.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. SEQUENCE OF TmnxCpmProtPolEntry .1.3.6.1.4.1.6527.3.1.2.22.9.12 |
tmnxCpmProtPolEntryEach row entry represents the configuration information related
to a CPM Protection policy. TmnxCpmProtPolEntry .1.3.6.1.4.1.6527.3.1.2.22.9.12.1 |
tmnxCpmProtPolicyIdThe value of tmnxCpmProtPolicyId specifies the identification number
of the CPM Protection policy. TCpmProtPolicyID .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.1 |
tmnxCpmProtPolRowStatusThe value of tmnxCpmProtPolRowStatus controls the creation and deletion
of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.2 |
tmnxCpmProtPolLastChangedThe value of tmnxCpmProtPolLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains
a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.3 |
tmnxCpmProtPolDescriptionThe value of tmnxCpmProtPolDescription specifies the user provided
description of this CPM Protection policy. The default CPM Protection
policies 254 and 255 have a default description which can be modified
by the user.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.4 |
tmnxCpmProtPolPerSrcRateLimitThe value of tmnxCpmProtPolPerSrcRateLimit specifies the packet arrival
rate limit to be applied to each source of packets.
Objects referring to this CPM Protection policy that do not support
per-source rate limiting, may ignore the
tmnxCpmProtPolPerSrcRateLimit.rw TmnxCpmPacketPolRateLimit UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.5 |
tmnxCpmProtPolOverallRateLimitThe value of tmnxCpmProtPolOverallRateLimit specifies
the overall packet arrival rate limit to be applied to all sources
of packets.
A default value of -1, specifies an unrestricted packet arrival rate
on the interface.
The value of tmnxCpmProtPolOverallRateLimit is equal to 6000
for the default access policy (policy 254).rw TmnxCpmPacketPolRateLimit UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.6 |
tmnxCpmProtPolAlarmThe value of tmnxCpmProtPolAlarm specifies if a notification must be
issued when one of the packet arrival rate limits is crossed.
A value of 'true' specifies that a notification must be issued.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.7 |
tmnxCpmProtPolOutProfileRateThe value of tmnxCpmProtPolOutProfileRate specifies the
threshold value at which incoming control packets are marked out of
profile.
A default value of -1 specifies absence of a set threshold on
the interface.
The value of tmnxCpmProtPolOutProfileRate is 6000
for the default access policy (policy 254).rw TmnxCpmPacketPolRateLimit UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.8 |
tmnxCpmProtPolLimDhcpCiAddrZeroThe value of tmnxCpmProtPolLimDhcpCiAddrZero specifies whether or not
to apply per-source rate limiting to DHCP packets containing Client IP
address zero (e.g., for IPv4, ciaddr = 0.0.0.0).
For example, suppose a SAP has the following configuration:
a) TIMETRA-SAP-MIB::sapCpmProtMonitorIP = 'true', and
b) TIMETRA-SAP-MIB::sapCpmProtPolicyId = 7.
Then, if the tmnxCpmProtPolLimDhcpCiAddrZero value for CPM Protection
policy 7 is 'true', DHCP packets arriving at the SAP are rate limited
using tmnxCpmProtPolPerSrcRateLimit, whether or not the ciaddr field is
zero. On the other hand, with the same SAP configuration, if the
tmnxCpmProtPolLimDhcpCiAddrZero value for CPM Protection policy 7 is
'false', DHCP packets arriving at the SAP with ciaddr zero are exempt
from the tmnxCpmProtPolPerSrcRateLimit.
The value of this object is irrelevant if the SAP's
TIMETRA-SAP-MIB::sapCpmProtMonitorIP value is 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.12.1.9 |
tmnxCpmProtDropUncfgdProtocolMsgThe value of tmnxCpmProtDropUncfgdProtocolMsg specifies
the administrative state of the protocol protection facility.
When the value of this object is set to 'inService (2)',
network control protocol traffic is dropped if it is received
on an interface where the protocol is not configured.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.13 |
tmnxCpmProtLinkRateLimitThe value of tmnxCpmProtLinkRateLimit specifies the link-specific
packet arrival rate limit to be applied to link-level protocols
such as LACP.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.rw TmnxCpmPacketRateLimit UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.14 |
tmnxCpmProtExcdTableLastChangedThe value of tmnxCpmProtExcdTableLastChanged indicates the sysUpTime at
the time of the last add, change, or delete of a row in the
tmnxCpmProtExcdTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero.
This object is not supported on SR-1 and ESS-1, where the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value
of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.15 |
tmnxCpmProtExcdTabletmnxCpmProtExcdTable has a row for each <service ID, SAP, source MAC
address> triple that has exceeded the per-source rate limit configured
for the <service ID, SAP> pair. MAC-layer per-source rate limiting is
enabled for a <service ID, SAP> pair by setting
TIMETRA-SAP-MIB::sapCpmProtMonitorMac to 'true'.
This object is not supported on SR-1 and ESS-1, where the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value
of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'. SEQUENCE OF TmnxCpmProtExcdEntry .1.3.6.1.4.1.6527.3.1.2.22.9.16 |
tmnxCpmProtExcdEntryEach row contains statistics for a MAC packet stream that has exceeded
its per-source rate limit.
A row is created by the system the first time a <service ID, SAP,
source MAC address> triple exceeds its per-source rate limit. The
row is updated by the system on subsequent violations.
Rows are deleted when a clear operation is requested on the underlying
statistics. TmnxCpmProtExcdEntry .1.3.6.1.4.1.6527.3.1.2.22.9.16.1 |
tmnxCpmProtExcdMacThe value of tmnxCpmProtExcdMac indicates the MAC address of a source
which has exceeded its per-source rate limit. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.16.1.1 |
tmnxCpmProtExcdPeriodsThe value of tmnxCpmProtExcdPeriods indicates the number of times a
per-source rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.16.1.2 |
tmnxCpmProtExcdTimeStartedThe value of tmnxCpmProtExcdTimeStarted indicates the sysUpTime at the
time of the creation of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.16.1.3 |
tmnxCpmProtExcdTimeThe value of tmnxCpmProtExcdTime indicates the sysUpTime at the time of
the last update of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.16.1.4 |
tmnxCpmProtViolPortTableLastChgdThe value of tmnxCpmProtViolPortTableLastChgd indicates the
sysUpTime at the time of the last modification of an entry in the
tmnxCpmProtViolPortTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.17 |
tmnxCpmProtViolPortTableThe tmnxCpmProtViolPortTable has an entry for each port where
either the link-specific packet arrival rate limit or the
per-port overall packet rate limit was violated.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. SEQUENCE OF TmnxCpmProtViolPortEntry .1.3.6.1.4.1.6527.3.1.2.22.9.18 |
tmnxCpmProtViolPortEntryEach row entry represents the information related to a port where the
link-specific packet arrival rate limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolPortEntry .1.3.6.1.4.1.6527.3.1.2.22.9.18.1 |
tmnxCpmProtViolPortPeriodsThe value of tmnxCpmProtViolPortPeriods indicates the number of times
the link-specific rate limit violation was detected at this port.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.1 |
tmnxCpmProtViolPortTimeStartedThe value of tmnxCpmProtViolPortTimeStarted indicates the sysUpTime
when the link-specific rate limit violation was detected
the first time at this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.2 |
tmnxCpmProtViolPortTimeThe value of tmnxCpmProtViolPortTime indicates the sysUpTime
when the link-specific rate limit violation was detected
the last time at this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.3 |
tmnxCpmProtViolPortAggPeriodsThe value of tmnxCpmProtViolPortAggPeriods indicates the number of
times the per-port overall rate limit violation was detected at this
port.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.4 |
tmnxCpmProtViolPortAggTimeStartThe value of tmnxCpmProtViolPortAggTimeStart indicates the sysUpTime
when the per-port overall rate limit violation was detected
the first time at this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.5 |
tmnxCpmProtViolPortAggTimeThe value of tmnxCpmProtViolPortAggTime indicates the sysUpTime
when the per-port overall rate limit violation was detected
the last time at this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.18.1.6 |
tmnxCpmProtViolIfTableLastChgdThe value of tmnxCpmProtViolIfTableLastChgd indicates the
sysUpTime at the time of the last modification of an entry in the
tmnxCpmProtViolIfTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.19 |
tmnxCpmProtViolIfTableThe tmnxCpmProtViolIfTable has an entry for each router interface
where the overall packet arrival rate limit was violated.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. SEQUENCE OF TmnxCpmProtViolIfEntry .1.3.6.1.4.1.6527.3.1.2.22.9.20 |
tmnxCpmProtViolIfEntryEach row entry represents the information related to a router interface
where the overall packet arrival rate limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolIfEntry .1.3.6.1.4.1.6527.3.1.2.22.9.20.1 |
tmnxCpmProtViolIfPeriodsThe value of tmnxCpmProtViolIfPeriods indicates the number of times
the rate limit violation was detected at this router interface.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.20.1.1 |
tmnxCpmProtViolIfTimeStartedThe value of tmnxCpmProtViolIfTimeStarted indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.20.1.2 |
tmnxCpmProtViolIfTimeThe value of tmnxCpmProtViolIfTime indicates the sysUpTime
at the time of the last modification of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.20.1.3 |
tmnxCpmProtViolSapTableLastChgdThe value of tmnxCpmProtViolSapTableLastChgd indicates the
sysUpTime at the time of the last modification of an entry in the
tmnxCpmProtViolSapTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object
contains a zero value.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.21 |
tmnxCpmProtViolSapTableThe tmnxCpmProtViolSapTable has an entry for each SAP
where the overall packet arrival rate limit was violated.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. SEQUENCE OF TmnxCpmProtViolSapEntry .1.3.6.1.4.1.6527.3.1.2.22.9.22 |
tmnxCpmProtViolSapEntryEach row entry represents the information related to a SAP
where the overall packet arrival rate limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolSapEntry .1.3.6.1.4.1.6527.3.1.2.22.9.22.1 |
tmnxCpmProtViolSapPeriodsThe value of tmnxCpmProtViolSapPeriods indicates the number of times
the rate limit violation was detected at this SAP.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.22.1.1 |
tmnxCpmProtViolSapTimeStartedThe value of tmnxCpmProtViolSapTimeStarted indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.22.1.2 |
tmnxCpmProtViolSapTimeThe value of tmnxCpmProtViolSapTime indicates the sysUpTime
at the time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.22.1.3 |
tmnxCpmProtPortOverallRateLimitThe value of tmnxCpmProtPortOverallRateLimit specifies the per-port
packet arrival rate limit to be applied to all protocol messages
that are to be processed by the CPM.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.rw TmnxCpmPacketRateLimit UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.23 |
tmnxCpmProtDetectPeriodThe value of tmnxCpmProtDetectPeriod indicates the length of a packet
arrival rate limit detection period.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro Unsigned32 UNITS "100 milliseconds" .1.3.6.1.4.1.6527.3.1.2.22.9.24 |
tCpmMacFilterTableThe tCpmMacFilterTable has an entry for each CPM Mac filter entry
configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmMacFilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.25 |
tCpmMacFilterEntryEach row entry represents a particular Cpm Mac Filter match entry.
The Cpm Mac Filter can have zero or more Cpm Mac Filter match entries.
A filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user. TCpmMacFilterEntry .1.3.6.1.4.1.6527.3.1.2.22.9.25.1 |
tCpmMacFltrEntryIdThe value of tCpmMacFltrEntryId is used to index into the
tCpmMacFilterTable. It uniquely identifies a CPM Mac filter
entry as configured on this system. TEntryId .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.1 |
tCpmMacFltrEntryRowStatusThe value of tCpmMacFltrEntryRowStatus specifies the row status. It
allows entries to be created and deleted in the tCpmMacFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.2 |
tCpmMacFltrEntryLastChangedThe value of tCpmMacFltrEntryLastChanged indicates the timestamp of
the last change to this row in tCpmMacFilterTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.3 |
tCpmMacFltrEntryLogIdThe value of tCpmMacFltrEntryLogId specifies the log in which
packets matching this entry should be entered.
The value zero indicates that logging is disabled.rw TFilterLogId (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.4 |
tCpmMacFltrEntryDescriptionThe value of tCpmMacFltrEntryDescription specifies the
user-provided string describing this filter entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.5 |
tCpmMacFltrEntryActionThe value of tCpmMacFltrEntryAction specifies the action to take
for packets that match this filter entry. The value default(4)
specifies this entry to inherit the behavior defined as the default
for the filter in tCpmFilterDefaultAction.
The value queue(3) can only be specified if a valid queue id is entered
in tCpmMacFltrEntryQueueId.rw TCpmFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.6 |
tCpmMacFltrEntryQueueIdThe value of tCpmMacFltrEntryQueueId specifies which queue to put
the packet in when tCpmMacFltrEntryAction is queue (3).
If the value of tCpmMacFltrEntryAction is different from queue (3)
tCpmMacFltrEntryQueueId will be forced by the system to 0, and any
change attempt will be silently discarded.rw TCpmFilterQueueId .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.7 |
tCpmMacFltrEntryFrameTypeThe value of tCpmMacFltrEntryFrameType specifies the type of
mac frame for which we are defining this match criteria.
The value 'none' means that this entry is not matching on any
enthernet frame.
The value 'e802dot1ag(4)' is depricated, and replaced by
e802dot2LLC(1).rw TmnxCpmMacFltrFrameType .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.8 |
tCpmMacFltrEntrySvcIdThe value of the object tCpmMacFltrEntrySvcId specifies the service-id
in which the packet is to be received for this entry to match.
A value of 0 indicates: any service.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.9 |
tCpmMacFltrEntryDot1pValueFiltering on dot1p bits is currently not offered on cpm-mac filters.
All set actions on this object will therefore be ignored.rw Dot1PPriority (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.10 |
tCpmMacFltrEntryDot1pMaskFiltering on dot1p bits is currently not offered on cpm-mac filters.
All set actions on this object will therefore be ignored.rw Dot1PPriorityMask (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.11 |
tCpmMacFltrEntryDsapThe value of the object tCpmMacFltrEntryDsap specifies the MAC DSAP
to match for this MAC filter entry. This object has no
significance if the object tCpmMacFltrEntryFrameType is not set to
802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.12 |
tCpmMacFltrEntryDsapMaskThe value of the object tCpmMacFltrEntryDsapMask specifies the
MAC DSAP mask for this MAC filter entry.
This object has no significance if the object
tCpmMacFltrEntryFrameType is not set to 802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.13 |
tCpmMacFltrEntrySrcMACThe value of the object tCpmMacFltrEntrySrcMAC specifies
the source MAC to match for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.14 |
tCpmMacFltrEntrySrcMACMaskThe value of the object tCpmMacFltrEntrySrcMACMask specifies
the source MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tCpmMacFltrEntrySrcMAC.
A zero bit means ignore this bit, do not match. A one bit means
match this bit with tCpmMacFltrEntrySrcMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.15 |
tCpmMacFltrEntryDstMACThe value of the object tCpmMacFltrEntryDstMAC specifies
the Destination MAC mask value for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.16 |
tCpmMacFltrEntryDstMACMaskThe value of the object tCpmMacFltrEntryDstMACMask specifies
the destination MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tCpmMacFltrEntryDstMAC.
A zero bit means ignore this bit, do not match. a one bit means
match this bit with tCpmMacFltrEntryDstMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.17 |
tCpmMacFltrEntryEtherTypeThe value of the object tCpmMacFltrEntryEtherType specifies the
Ethertype for this MAC filter entry. Use -1 to disable matching
by this criteria. This object has no significance if the object
tCpmMacFltrEntryFrameType is not set to Ethernet_II.rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.18 |
tCpmMacFltrEntrySsapThe value of the object tCpmMacFltrEntrySsap specifies the
the MAC SSAP to match for this MAC filter entry. This object has no
significance if the object tCpmMacFltrEntryFrameType is not set to
802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.21 |
tCpmMacFltrEntrySsapMaskThe value of the object tCpmMacFltrEntrySsapMask specifies the
MAC SSAP mask for this MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the
object tCpmMacFltrEntryFrameType is not set to 802dot2LLC.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.22 |
tCpmMacFltrEntryCfmOpCodeOperThe value of the object tCpmMacFltrEntryCfmOpCodeOper specifies which
type of opcode checking is to be performed.
If different fron none, more info is provided in the objects
tCpmMacFltrEntryCfmOpCodeValue1 and tCpmMacFltrEntryCfmOpCodeValue2.
This object has significance only if the object tCpmMacFltrEntryFrameType
refers to either ieee802.1ag or Y1731.rw TOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.23 |
tCpmMacFltrEntryCfmOpCodeValue1The value of the object tCpmMacFltrEntryCfmOpCodeValue1 specifies a cfm
opcode. The value of this object is used as per the
description for tCpmMacFltrEntryCfmOpCodeOper.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.24 |
tCpmMacFltrEntryCfmOpCodeValue2The value of the object tCpmMacFltrEntryCfmOpCodeValue2 specifies a cfm
opcode. The value of this object is used as per the
description for tCpmMacFltrEntryCfmOpCodeOper.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.25 |
tCpmMacFltrEntryLogCreatedThe value of tCpmMacFltrEntryLogCreated indicates whether the
filter log for this filter entry has been instantiated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.25.1.26 |
tCpmMacFilterStatsTableThe tCpmMacFilterStatsTable has a stats entry of the
CPM Mac filter configured on this system.
This table is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'. SEQUENCE OF TCpmMacFilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.26 |
tCpmMacFilterStatsEntryEach row entry represents the statistics related to the
tCpmMacFilterEntry indexed by the same tCpmMacFltrEntryId.
Entries are created when tCpmMacFilterEntry rows are created. TCpmMacFilterStatsEntry .1.3.6.1.4.1.6527.3.1.2.22.9.26.1 |
tCpmMacFilterStatsDroppedPktsThe value of tCpmMacFilterStatsDroppedPkts indicates
the number of packets dropped due to the tCpmMacFilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.26.1.1 |
tCpmMacFilterStatsForwardedPktsThe value of tCpmMacFilterStatsForwardedPkts indicates
the number of packets forwarded due to the tCpmMacFilterEntry
with the same index.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.22.9.26.1.2 |
tmnxCpmProtAllowShamLinkPacketsThe value of tmnxCpmProtAllowShamLinkPackets specifies whether OSPF
sham-link traffic will be allowed over VPRN transport tunnels.
When the value of this object is set to 'true (1)', OSPF sham-link
traffic will be allowed even if OSPF is not configured. When the value
of this object is set to 'false (2)', OSPF sham-link traffic is dropped
if it is received on an interface where the protocol is not configured.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.27 |
tmnxCpmProtViolVdoSvcTableThe tmnxCpmProtViolVdoSvcTable has an entry for each client address of
a RTCP control traffic in VPLS service where the per-source
rate limit was violated. SEQUENCE OF TmnxCpmProtViolVdoSvcEntry .1.3.6.1.4.1.6527.3.1.2.22.9.28 |
tmnxCpmProtViolVdoSvcEntryEach row entry represents the information related to a client address
of a RTCP control traffic in VPLS service where the per-source rate
limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolVdoSvcEntry .1.3.6.1.4.1.6527.3.1.2.22.9.28.1 |
tmnxCpmProtViolVdoSvcCltAddrTypeThe value of tmnxCpmProtViolVdoSvcCltAddrType indicates the type of
address represented by tmnxCpmProtViolVdoSvcCltAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.1 |
tmnxCpmProtViolVdoSvcCltAddrThe value of tmnxCpmProtViolVdoSvcCltAddr indicates the client IP
address of a RTCP control traffic in VPLS service where the per-source
rate limit was violated. InetAddress .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.2 |
tmnxCpmProtViolVdoSvcPeriodsThe value of tmnxCpmProtViolVdoSvcPeriods indicates the number of times
the per-source rate limit violation was detected for this client.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.3 |
tmnxCpmProtViolVdoSvcTimeStartedThe value of tmnxCpmProtViolVdoSvcTimeStarted indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.4 |
tmnxCpmProtViolVdoSvcTimeThe value of tmnxCpmProtViolVdoSvcTime indicates the sysUpTime
at the time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.5 |
tmnxCpmProtViolVdoSvcVrtrIfIndexThe value of tmnxCpmProtViolVdoSvcVrtrIfIndex specifies the secondary
index in the TIMETRA-VRTR-MIB::vRtrIfTable corresponding to the video
interface where the per-source rate limit was violated. The value of
primary index TIMETRA-VRTR-MIB::vRtrIfTable will be equal to the
virtual router identifier of vpls-management which is 4094.ro InterfaceIndex (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.28.1.6 |
tmnxCpmProtViolVdoVrtrTableThe tmnxCpmProtViolVdoVrtrTable has an entry for each client address of
a RTCP control traffic in router context where the per-source
rate limit was violated. SEQUENCE OF TmnxCpmProtViolVdoVrtrEntry .1.3.6.1.4.1.6527.3.1.2.22.9.29 |
tmnxCpmProtViolVdoVrtrEntryEach row entry represents the information related to a client address
of a RTCP control traffic in router context where the per-source rate
limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolVdoVrtrEntry .1.3.6.1.4.1.6527.3.1.2.22.9.29.1 |
tmnxCpmProtViolVdoVrtrCltAdrTypeThe value of tmnxCpmProtViolVdoVrtrCltAdrType indicates the type of
address represented by tmnxCpmProtViolVdoVrtrCltAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.1 |
tmnxCpmProtViolVdoVrtrCltAddrThe value of tmnxCpmProtViolVdoSvcCltAddr indicates the client IP
address of a RTCP control traffic in router context where the
per-source rate limit was violated. InetAddress .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.2 |
tmnxCpmProtViolVdoVrtrPeriodsThe value of tmnxCpmProtViolVdoVrtrPeriods indicates the number of
times the per-source rate limit violation was detected for this client.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.3 |
tmnxCpmProtViolVdoVrtrTimeStartThe value of tmnxCpmProtViolVdoVrtrTimeStart indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.4 |
tmnxCpmProtViolVdoVrtrTimeThe value of tmnxCpmProtViolVdoVrtrTime indicates the sysUpTime
at the time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.5 |
tmnxCpmProtViolVdoVrtrSvcIdThe value of tmnxCpmProtViolVdoVrtrSvcId indicates the row index in the
TIMETRA-SERV-MIB::svcBaseInfoTable corresponding to the service
where the per-source rate limit was violated.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.6 |
tmnxCpmProtViolVdoVrtrIfIndexThe value of tmnxCpmProtViolVdoVrtrIfIndex specifies the secondary
index in the TIMETRA-VRTR-MIB::vRtrIfTable corresponding to the video
interface where the per-source rate limit was violated. The value of
vRtrID specifies the primary index in the
TIMETRA-VRTR-MIB::vRtrIfTable.ro InterfaceIndex (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.29.1.7 |
tmnxCpmProtEthCfmPolTableLastChgThe value of tmnxCpmProtEthCfmPolTableLastChg indicates the value of
the sysUpTime object when the last change was made to
tmnxCpmProtEthCfmPolTable. A value of 0 indicates that no changes were
made to tmnxCpmProtEthCfmPolTable since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.30 |
tmnxCpmProtEthCfmPolTabletmnxCpmProtEthCfmPolTable contains configurable rules (similar to an
Access Control List) used to rate limit the flow of Ethernet
Connectivity Fault Management packets. The table can be used to
minimize the impact of an Eth-CFM Denial of Service attack.
The table extends tmnxCpmProtPolTable, by allowing several
<rate-limit, eth-cfm-level, eth-cfm-opcode> triples to be defined for
a CPM protection policy.
For example, tmnxCpmProtEthCfmPolTable could contain the following
information (where the column labels for the table's index objects are
in upper case):
POLICY ID ENTRY NUM Level Opcode Rate Limit
- - -
250 10 {4} {10} 100 packets/sec
250 20 {4,6} {1,3} 200 packets/sec
250 30 {0-7} {0-255} 300 packets/sec
{0-7} indicates {0, 1, 2, 3, 4, 5, 6, 7}.
Suppose the example configuration above is in place, and an Eth-CFM
PDU arrives on a SAP which has Policy ID 250 configured against it.
If the PDU contains level=4 and opcode=1, the 200 packets/sec rate
limit is applied. Within a Policy ID, the first row (i.e.
the row with the lowest entry number) matching the PDU applies.
Therefore, the third row in the example applies a 300 packets/sec
limit to any PDU which does not match the first or second row.
At most four Policy IDs can have rows in this table. At most 10 rows
are supported per Policy ID.
If the user chooses well-spaced tmnxCpmProtEthCfmPolEntryNum values
(e.g. 10, 20, 30) when initially creating the rows for a particular
tmnxCpmProtPolicyId, it will be possible to add rows in the gaps
later, without reconfiguration.
A prerequisite for creating a row in this table: a row with the same
tmnxCpmProtPolicyId must exist in tmnxCpmProtPolTable. Deleting a row
in tmnxCpmProtPolTable deletes all the rows in this table with
matching tmnxCpmProtPolicyId values. SEQUENCE OF TmnxCpmProtEthCfmPolEntry .1.3.6.1.4.1.6527.3.1.2.22.9.31 |
tmnxCpmProtEthCfmPolEntryEach row specifies a set of Ethernet CFM packets to be rate limited,
and the associated rate limit.
Table rows are created and destroyed using
tmnxCpmProtEthCfmPolRowStatus. TmnxCpmProtEthCfmPolEntry .1.3.6.1.4.1.6527.3.1.2.22.9.31.1 |
tmnxCpmProtEthCfmPolEntryNumThe value of tmnxCpmProtEthCfmPolEntryNum specifies a user-selected
entry number. This index exists to allow multiple
tmnxCpmProtEthCfmPolTable rows for one tmnxCpmProtPolicyId. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.1 |
tmnxCpmProtEthCfmPolRowStatusThe value of tmnxCpmProtEthCfmPolRowStatus specifies the row status of
this tmnxCpmProtEthCfmPolEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.2 |
tmnxCpmProtEthCfmPolLastChangedThe value of tmnxCpmProtEthCfmPolLastChanged indicates the value of
the sysUpTime object when the last change was made to this row. A
value of 0 indicates that no changes were made to this row since the
system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.3 |
tmnxCpmProtEthCfmPolLevelSetThe value of tmnxCpmProtEthCfmPolLevelSet specifies a set of MEG
(Maintenance Entity Group) Level values. At least one Level must be
specified (i.e. the empty set is not supported).
The rate limit specified by tmnxCpmProtEthCfmPolRateLimit applies to an
Eth-CFM PDU if:
a) tmnxCpmProtPolicyId is configured against the PDU stream containing
the PDU, and
b) the PDU's MEL (MEG Level) value is an element of
tmnxCpmProtEthCfmPolLevelSet, and
c) the PDU's Opcode value is an element of
tmnxCpmProtEthCfmPolOpCodeSet.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.4 |
tmnxCpmProtEthCfmPolOpCodeSetThe value of tmnxCpmProtEthCfmPolOpCodeSet specifies a set of Eth-CFM
PDU Opcode values to be matched against the Opcode field of an Eth-CFM
PDU which is subject to rate limiting. At least one Opcode must be
specified (i.e. the empty set is not supported).
This object works in conjunction with tmnxCpmProtEthCfmPolLevelSet, as
described in the tmnxCpmProtEthCfmPolLevelSet DESCRIPTION.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.5 |
tmnxCpmProtEthCfmPolRateLimitThe value of tmnxCpmProtEthCfmPolRateLimit specifies the rate limit
to be enforced for the Eth-CFM packet stream specified by
tmnxCpmProtPolicyId, tmnxCpmProtEthCfmPolLevelSet, and
tmnxCpmProtEthCfmPolOpCodeSet.rw TmnxCpmPktPolRateLimitInclZero UNITS "packets per second" .1.3.6.1.4.1.6527.3.1.2.22.9.31.1.6 |
tmnxCpmProtViolSdpBindTblLastChgThe value of tmnxCpmProtViolSdpBindTblLastChg indicates the sysUpTime
at the time of the last modification of an entry in the
tmnxCpmProtViolSdpBindTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object is zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.32 |
tmnxCpmProtViolSdpBindTabletmnxCpmProtViolSdpBindTable has a row for each SDP binding,
where the overall packet arrival rate limit was violated. SEQUENCE OF TmnxCpmProtViolSdpBindEntry .1.3.6.1.4.1.6527.3.1.2.22.9.33 |
tmnxCpmProtViolSdpBindEntryEach row contains the statistics for an SDP binding where the overall
packet arrival rate limit was violated.
Rows are created or removed automatically by the system. TmnxCpmProtViolSdpBindEntry .1.3.6.1.4.1.6527.3.1.2.22.9.33.1 |
tmnxCpmProtViolSdpBindPeriodsThe value of tmnxCpmProtViolSdpBindPeriods indicates the number of
times a rate limit violation was detected at this SDP binding.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.9.33.1.1 |
tmnxCpmProtViolSdpBindTimeStartdThe value of tmnxCpmProtViolSdpBindTimeStartd indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.33.1.2 |
tmnxCpmProtViolSdpBindTimeThe value of tmnxCpmProtViolSdpBindTime indicates the sysUpTime
at the time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.33.1.3 |
tmnxCpmProtExcdSdpBindTblLastChgThe value of tmnxCpmProtExcdSdpBindTblLastChg indicates the sysUpTime
at the time of the last modification of an entry in the
tmnxCpmProtExcdSdpBindTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object is zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.34 |
tmnxCpmProtExcdSdpBindTabletmnxCpmProtExcdSdpBindTable has a row for each SDP binding and
source MAC address pair that has exceeded its per-source rate limit.
The equivalent table for SAPs is tmnxCpmProtExcdTable. SEQUENCE OF TmnxCpmProtExcdSdpBindEntry .1.3.6.1.4.1.6527.3.1.2.22.9.35 |
tmnxCpmProtExcdSdpBindEntryEach row contains the statistics for a PDU stream that has exceeded
its per-source rate limit.
Rows are created or removed automatically by the system. TmnxCpmProtExcdSdpBindEntry .1.3.6.1.4.1.6527.3.1.2.22.9.35.1 |
tmnxCpmProtExcdSdpBindMacThe value of tmnxCpmProtExcdSdpBindMac specifies the MAC address of the
source. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.35.1.1 |
tmnxCpmProtExcdSdpBindPeriodsThe value of tmnxCpmProtExcdSdpBindPeriods indicates the number of
times a per-source rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.9.35.1.2 |
tmnxCpmProtExcdSdpBindTimeStartdThe value of tmnxCpmProtExcdSdpBindTimeStartd indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.35.1.3 |
tmnxCpmProtExcdSdpBindTimeThe value of tmnxCpmProtExcdSdpBindTime indicates the sysUpTime at the
time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.35.1.4 |
tmnxCpmProtExcdSdpBindEcmTblLChgThe value of tmnxCpmProtExcdSdpBindEcmTblLChg indicates the sysUpTime
at the time of the last modification of an entry in the
tmnxCpmProtExcdSdpBindEcmTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object is zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.36 |
tmnxCpmProtExcdSdpBindEcmTabletmnxCpmProtExcdSdpBindEcmTable has a row for each Ethernet
Connectivity Fault Management (Eth-CFM) PDU stream, served by an SDP
binding, that has exceeded its Eth-CFM rate limit. SEQUENCE OF TmnxCpmProtExcdSdpBindEcmEntry .1.3.6.1.4.1.6527.3.1.2.22.9.37 |
tmnxCpmProtExcdSdpBindEcmEntryEach row contains the statistics for an Eth-CFM PDU stream that has
exceeded its Eth-CFM rate limit.
Rows are created or removed automatically by the system. TmnxCpmProtExcdSdpBindEcmEntry .1.3.6.1.4.1.6527.3.1.2.22.9.37.1 |
tmnxCpmProtExcdSdpBindEcmMacThe value of tmnxCpmProtExcdSdpBindEcmMac specifies a source MAC
address. The Eth-CFM PDU stream matching the MAC address (and
matching the other index values of this table) has exceeded its
Eth-CFM rate limit.
The manager must provide the all-zero MAC address to get a row for a
stream which is Eth-CFM rate limited using the
'ethCfmMonitorAggregate(1)' option of the
sdpBindCpmProtEthCfmMonitorFlags object. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.1 |
tmnxCpmProtExcdSdpBindEcmLevelThe value of tmnxCpmProtExcdSdpBindEcmLevel specifies an Eth-CFM domain
level. The Eth-CFM PDU stream matching the domain level (and matching
the other index values of this table) has exceeded its Eth-CFM rate
limit. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.2 |
tmnxCpmProtExcdSdpBindEcmOpCodeThe value of tmnxCpmProtExcdSdpBindEcmOpCode specifies an Eth-CFM
opcode (e.g. Continuity Check Message == 1). The Eth-CFM PDU stream
matching the opcode (and matching the other index values of this table)
has exceeded its Eth-CFM rate limit. TmnxCpmProtEthCfmOpCode .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.3 |
tmnxCpmProtExcdSdpBindEcmPeriodsThe value of tmnxCpmProtExcdSdpBindEcmPeriods indicates the number of
times a rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.4 |
tmnxCpmProtExcdSdpBindEcmStartedThe value of tmnxCpmProtExcdSdpBindEcmStarted indicates the sysUpTime
at the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.5 |
tmnxCpmProtExcdSdpBindEcmTimeThe value of tmnxCpmProtExcdSdpBindEcmTime indicates the sysUpTime at
the time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.37.1.6 |
tmnxCpmProtExcdSapEcmTblLChgThe value of tmnxCpmProtExcdSapEcmTblLChg indicates the sysUpTime
at the time of the last modification of an entry in the
tmnxCpmProtExcdSapEcmTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object is zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.38 |
tmnxCpmProtExcdSapEcmTabletmnxCpmProtExcdSapEcmTable has a row for each Ethernet
Connectivity Fault Management (Eth-CFM) PDU stream, served by a SAP,
that has exceeded its Eth-CFM rate limit. SEQUENCE OF TmnxCpmProtExcdSapEcmEntry .1.3.6.1.4.1.6527.3.1.2.22.9.39 |
tmnxCpmProtExcdSapEcmEntryEach row contains the statistics for an Eth-CFM PDU stream that has
exceeded its Eth-CFM rate limit.
Rows are created or removed automatically by the system. TmnxCpmProtExcdSapEcmEntry .1.3.6.1.4.1.6527.3.1.2.22.9.39.1 |
tmnxCpmProtExcdSapEcmMacThe value of tmnxCpmProtExcdSapEcmMac specifies a source MAC
address. The Eth-CFM PDU stream matching the MAC address (and
matching the other index values of this table) has exceeded its
Eth-CFM rate limit.
The manager must provide the all-zero MAC address to get a row for a
stream which is Eth-CFM rate limited using the
'ethCfmMonitorAggregate(1)' option of the
sapCpmProtEthCfmMonitorFlags object. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.1 |
tmnxCpmProtExcdSapEcmLevelThe value of tmnxCpmProtExcdSapEcmLevel specifies an Eth-CFM domain
level. The Eth-CFM PDU stream matching the domain level (and matching
the other index values of this table) has exceeded its Eth-CFM rate
limit. Dot1agCfmMDLevel .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.2 |
tmnxCpmProtExcdSapEcmOpCodeThe value of tmnxCpmProtExcdSapEcmOpCode specifies an Eth-CFM opcode
(e.g. Continuity Check Message == 1). The Eth-CFM PDU stream matching
the opcode (and matching the other index values of this table) has
exceeded its Eth-CFM rate limit. TmnxCpmProtEthCfmOpCode .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.3 |
tmnxCpmProtExcdSapEcmPeriodsThe value of tmnxCpmProtExcdSapEcmPeriods indicates the number of times
a rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.4 |
tmnxCpmProtExcdSapEcmStartedThe value of tmnxCpmProtExcdSapEcmStarted indicates the sysUpTime at
the time of the creation of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.5 |
tmnxCpmProtExcdSapEcmTimeThe value of tmnxCpmProtExcdSapEcmTime indicates the sysUpTime at the
time of the last update of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.39.1.6 |
tmnxCpmVprnNwExceptionsThe value of tmnxCpmVprnNwExceptions specifies whether the MPLS
exception messages are allowed to be received on all VPRN instances.
When the value of tmnxCpmVprnNwExceptions is set to 'true', the MPLS
exception messages are allowed to be received on all VPRN instances
in the system from all network interfaces.
When the value of tmnxCpmVprnNwExceptions is set to 'false', the MPLS
exception messages are not allowed to be received on all VPRN
instances in the system from all network interfaces.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.40 |
tmnxCpmNumVprnNwExceptionsThe value of tmnxCpmNumVprnNwExceptions specifies the number of MPLS
exception messages allowed to be received in the time frame
specified by tmnxCpmVprnNwExceptionsTime.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.41 |
tmnxCpmVprnNwExceptionsTimeThe value of tmnxCpmVprnNwExceptionsTime specifies the time frame in
seconds that is used to limit the number of MPLS exception messages
issued per time frame.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.9.42 |
tmnxCpmProtExcdSapIpTableLastChgThe value of tmnxCpmProtExcdSapIpTableLastChg indicates the sysUpTime
at the time of the last add, change, or delete of a row in the
tmnxCpmProtExcdSapIpTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.43 |
tmnxCpmProtExcdSapIpTabletmnxCpmProtExcdSapIpTable has a row for each <service ID, SAP, source
IP address> triple that has exceeded the per-source rate limit
configured for the <service ID, SAP> pair. IP-layer per-source rate
limiting is enabled for a <service ID, SAP> pair by setting
TIMETRA-SAP-MIB::sapCpmProtMonitorIP to 'true'. SEQUENCE OF TmnxCpmProtExcdSapIpEntry .1.3.6.1.4.1.6527.3.1.2.22.9.44 |
tmnxCpmProtExcdSapIpEntryEach row contains statistics for an IP packet stream that has exceeded
its per-source rate limit.
A row is created by the system the first time a <service ID, SAP,
source IP address> triple exceeds its per-source rate limit. The
row is updated by the system on subsequent violations.
Rows are deleted when a clear operation is requested on the underlying
statistics. TmnxCpmProtExcdSapIpEntry .1.3.6.1.4.1.6527.3.1.2.22.9.44.1 |
tmnxCpmProtExcdSapIpAddrTypeThe value of tmnxCpmProtExcdSapIpAddrType indicates the address type of
tmnxCpmProtExcdSapIpAddr. 'ipv4(1)' is the only supported value. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.9.44.1.1 |
tmnxCpmProtExcdSapIpAddrThe value of tmnxCpmProtExcdSapIpAddr indicates the IP address of a
source which has exceeded its per-source rate limit. InetAddress .1.3.6.1.4.1.6527.3.1.2.22.9.44.1.2 |
tmnxCpmProtExcdSapIpPeriodsThe value of tmnxCpmProtExcdSapIpPeriods indicates the number of times
a per-source rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.9.44.1.3 |
tmnxCpmProtExcdSapIpStartedThe value of tmnxCpmProtExcdSapIpStarted indicates the sysUpTime at the
time of the creation of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.44.1.4 |
tmnxCpmProtExcdSapIpTimeThe value of tmnxCpmProtExcdSapIpTime indicates the sysUpTime at the
time of the last update of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.9.44.1.5 |
tmnxPasswordHashObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.10 |
tmnxPassHashReadVersiontmnxPassHashReadVersion specifies the password hash version
accepted by the system while executing commands.
The value 'all' overrides this check and hence allows all
supported versions to be accepted.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.10.1 |
tmnxPassHashWriteVersiontmnxPassHashWriteVersion specifies the hash version to be
used while saving the configuration files.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.10.2 |
tmnxSSHServerObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.11 |
tmnxSSHServerPreserveKeytmnxSSHServerPreserveKey specifies the persistence of the SSH
server host key. A value of 'true' specifies that the host key
will be saved by the server and restored following a system
reboot. The SSH client also saves the host key and
restores it following a system reboot.
A value of 'false' specifies that the host key will be held
in memory by both the SSH server and the SSH client and
is not restored following a system reboot.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.11.1 |
tmnxSSHServerVersiontmnxSSHServerVersion specifies the SSH protocol version that will be
by supported by the SSH server.
A value of tmnxSSHServerVersion 'version1' specifies that the SSH
server will only accept connections from clients that support SSH
protocol version 1. A value of 'both' specifies that the SSH server
will accept connections from clients supporting either SSH protocol
version 1, or SSH protocol version 2 or both.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.22.11.2 |
tmnxSourceIPTableThe tmnxSourceIPEntry has an entry for the source IP to be used by
the specified protocol. SEQUENCE OF TmnxSourceIPEntry .1.3.6.1.4.1.6527.3.1.2.22.12 |
tmnxSourceIPEntrytmnxSourceIPEntry is an entry (conceptual row) in the
tmnxSourceIPTable. Each entry represents the source IP address to be
used by the specified application for a particular Virtual Router
instance.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxSourceIPRowStatus. TmnxSourceIPEntry .1.3.6.1.4.1.6527.3.1.2.22.12.1 |
tmnxSourceIPProtoAppThe value of tmnxSourceIPProtoApp specifies the application which
should use the source-IP address specified by the value of
tmnxSourceIPAddress.
tmnxSourceIPAddressType must be 'ipv6 (2)' when setting the value of
this object to 'telnet6 (14)', 'ftp6 (15)', 'radius6 (16)',
'tacplus6 (17)', 'snmpTrap6 (18)', 'syslog6 (19)', 'icmpPing6 (20)',
'traceRoute6 (21)' or 'dns6 (22)'. Enumeration .1.3.6.1.4.1.6527.3.1.2.22.12.1.2 |
tmnxSourceIPRowStatusThe value of tmnxSourceIPRowStatus is used to create or destroy
entries in this table.
A row entry for a particular vRtrID with tmnxSourceIPProtoApp set to
any value can be created only if the value of tmnxSourceIPAddress
or tmnxSourceIPIfIndex is specified.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.12.1.3 |
tmnxSourceIPAddressTypeThe value of tmnxSourceIPAddressType specifies the address type of
tmnxSourceIPAddress address.
The value of tmnxSourceIPAddressType can be either of
InetAddressType - 'ipv4' or InetAddressType - 'ipv6'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.12.1.4 |
tmnxSourceIPAddressThe value of tmnxSourceIPAddress specifies the source address that
should be used in all unsolicited packets sent by the application
specified by the value of tmnxSourceIPProtoApp. For the value
specified by tmnxSourceIPProtoApp, either of tmnxSourceIPAddress
or tmnxSourceIPIfIndex can be specified, but not both.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.22.12.1.5 |
tmnxSourceIPIfIndextmnxSourceIPIfIndex specifies the interface index whose IP
address should be used in all unsolicited packets sent by the
application specified by the value of tmnxSourceIPProtoApp. For the
value specified by tmnxSourceIPProtoApp, either of
tmnxSourceIPAddress or tmnxSourceIPIfIndex can be
specified, but not both.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.22.12.1.6 |
tmnxSourceIPOperStatusThe value of tmnxSourceIPOperStatus indicates the state of
tmnxSourceIPEntry. A value of 'up' indicates that the IP
address specified by tmnxSourceIPAddress will be used for all
unsolicited packets sent by the application specified by the value of
tmnxSourceIPProtoApp.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.22.12.1.7 |
tmnxUserTemplateTabletmnxUserTemplateTable contains configuration information for the
template of a system user. SEQUENCE OF TmnxUserTemplateEntry .1.3.6.1.4.1.6527.3.1.2.22.13 |
tmnxUserTemplateEntrytmnxUserTemplateEntry is an entry (conceptual row) in the
tmnxUserTemplateTable.
Each entry represents the configuration for the template of a system
user. Entries in this table cannot be created or deleted. TmnxUserTemplateEntry .1.3.6.1.4.1.6527.3.1.2.22.13.1 |
tmnxTemplateNameThe value of tmnxTemplateName specifies the name of the template
from which a system user can be derived. This name must be unique
amongst the table entries. TNamedItem .1.3.6.1.4.1.6527.3.1.2.22.13.1.1 |
tmnxTemplateAccessThe value of tmnxTemplateAccess specifies the type of access
permitted to the user derived from this template. To allow this user
access to the console or FTP, set the corresponding bit in
tmnxTemplateAccess. Reset the bit to deny the access.rw Bits .1.3.6.1.4.1.6527.3.1.2.22.13.1.2 |
tmnxTemplateHomeDirectoryThe value of tmnxTemplateHomeDirectory specifies the local home
directory on FTP and console access of the user derived from this
template.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.13.1.3 |
tmnxTemplateRestrictedToHomeWhen the value of tmnxTemplateRestrictedToHome is 'true', the
user derived from this template is not allowed to navigate to
directories above his home directory for file access.
When the value of tmnxTemplateRestrictedToHome is 'false', the
access is allowed to directories above the home directory.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.13.1.4 |
tmnxTemplateConsoleLoginExecFileThe value of tmnxTemplateConsoleLoginExecFile specifies the file
that should be executed whenever the user derived from this template
has successfully logged in to a console session.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.13.1.5 |
tmnxTemplateProfileThe value of tmnxTemplateProfile specifies the user profile
entry from the tmnxUserProfileTable that will be applied
to the user derived from this template.
For users authenticated by TACACS+, the profile specified by
tmnxTemplateProfile will only apply if TACACS+ command
authorization is disabled as specified by
tmnxTacPlusAuthorization being set to 'false'.rw TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.13.1.6 |
tmnxKeyChainTableThe tmnxKeyChainEntry has an entry for a particular configured
keychain used by the protocol session. SEQUENCE OF TmnxKeyChainEntry .1.3.6.1.4.1.6527.3.1.2.22.14 |
tmnxKeyChainEntrytmnxKeyChainEntry is an entry (conceptual row) in the
tmnxKeyChainTable. Each entry represents the keychain configuration
which will be applied to a protocol session.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxKeyChainRowStatus. TmnxKeyChainEntry .1.3.6.1.4.1.6527.3.1.2.22.14.1 |
tmnxKeyChainNameThe value of tmnxKeyChainName specifies a unique keychain name which
identifies this particular keychain entry. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.14.1.1 |
tmnxKeyChainRowStatusThe value of tmnxKeyChainRowStatus is used to create or destroy
entries in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.14.1.2 |
tmnxKeyChainDescriptionThe value of tmnxKeyChainDescription specifies the description of
the key chain identified by the keychain name tmnxKeyChainName.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.14.1.3 |
tmnxKeyChainSendTcpOptionNumThe value of tmnxKeyChainSendTcpOptionNum specifies the TCP
option value to use in the TCP header of packets being sent by the
router to another device.
The value of tmnxKeyChainSendTcpOptionNum is valid only when
tmnxKeyChainAuthenticationKey is used to sign and/or
authenticate the TCP protocol stream.rw TmnxKeyChainTcpOptionNum .1.3.6.1.4.1.6527.3.1.2.22.14.1.4 |
tmnxKeyChainReceiveTcpOptionNumThe value of tmnxKeyChainReceiveTcpOptionNum specifies the TCP
option value to check for in the TCP header of packets being received
by the router.
The value of tmnxKeyChainReceiveTcpOptionNum is valid only when
tmnxKeyChainAuthenticationKey is used to sign and/or
authenticate the TCP protocol stream.rw TmnxKeyChainTcpOptionNum .1.3.6.1.4.1.6527.3.1.2.22.14.1.5 |
tmnxKeyChainAdminStateThe value of tmnxKeyChainAdminState specifies the desired
administrative state of the keychain. If the value is 'outOfService'
the keychain capabilities are disabled but the keychain configuration
parameters are retained.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.14.1.6 |
tmnxKeyChainOperStateThe value of tmnxKeyChainOperState indicates the operational state
of the keychain. A value of 'inService' indicates that the key chain
can be used to sign and/or authenticate protocol streams.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.14.1.7 |
tmnxKeyChainKeyTableThe tmnxKeyChainKeyEntry has an entry for a particular configured key
that will be used in a particular keychain defined by
tmnxKeyChainEntry in tmnxKeyChainTable. SEQUENCE OF TmnxKeyChainKeyEntry .1.3.6.1.4.1.6527.3.1.2.22.15 |
tmnxKeyChainKeyEntrytmnxKeyChainKeyEntry is an entry (conceptual row) in the
tmnxKeyChainKeyTable. Each entry represents the key configuration
which will be applied to a keychain.
Entries in this table can be created and deleted via SNMP SET
operations to tmnxKeyChainKeyRowStatus. TmnxKeyChainKeyEntry .1.3.6.1.4.1.6527.3.1.2.22.15.1 |
tmnxKeyChainKeyDirectionThe value of tmnxKeyChainKeyDirection is used to specify the
protocol-stream direction to encrypt.
A value of 'send' specifies that this key entry will be used to sign
protocol packets that are being sent by the router to another device.
A value of 'receive' specifies this key entry will be used to
authenticate protocol packets that are being received by the router.
A value of 'send-receive' specifies that this key will be used to sign
protocol packet that are being sent by the router to another device,
as well as to authenticate protocol packets that are being received by
the router. TmnxKeyChainKeyDirection .1.3.6.1.4.1.6527.3.1.2.22.15.1.1 |
tmnxKeyChainKeyIDThe value of tmnxKeyChainKeyID specifies a key id which is used along
with tmnxKeyChainName and tmnxKeyChainKeyDirection to uniquely
identify this particular key entry.
A value of 255 identifies this as a 'null-key' entry which enables
the transition from an unauthenticated session to an enhanced
authentication session. Unsigned32 (0..63|255) .1.3.6.1.4.1.6527.3.1.2.22.15.1.2 |
tmnxKeyChainKeyRowStatusThe value of tmnxKeyChainKeyRowStatus is used to create or destroy
entries in this table.
tmnxKeyChainAuthenticationKey and tmnxKeyChainKeyAlgorithm must
be set in the same SNMP request PDU as tmnxKeyChainKeyRowStatus
during row creation else the set request will fail with an
inconsistentValue error.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.15.1.3 |
tmnxKeyChainAuthenticationKeyThe value of tmnxKeyChainAuthenticationKey specifies the key that
will be used by the encryption algorithm specified by
tmnxKeyChainKeyAlgorithm. tmnxKeyChainAuthenticationKey is used
to sign and authenticate a protocol packet.
The value of tmnxKeyChainAuthenticationKey can be any combination
of letters or numbers. Note that the string may contain embedded nulls.
tmnxKeyChainAuthenticationKey and tmnxKeyChainKeyAlgorithm, which
indicates the encryption algorithm to be used, must be set together in
the same SNMP request PDU or else the set request will fail with an
inconsistentValue error.
When read, tmnxKeyChainAuthenticationKey always returns an Octet
string of length zero.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.15.1.4 |
tmnxKeyChainKeyAlgorithmThe value of tmnxKeyChainKeyAlgorithm specifies the algorithm that
will be used to sign and/or authenticate the protocol stream.
tmnxKeyChainAuthenticationKey and tmnxKeyChainKeyAlgorithm, which
indicates the encryption algorithm to be used, must be set together in
the same SNMP request PDU or else the set request will fail with an
inconsistentValue error.rw TmnxKeyChainKeyAlgorithm .1.3.6.1.4.1.6527.3.1.2.22.15.1.5 |
tmnxKeyChainKeyBeginTimeThe value of tmnxKeyChainKeyBeginTime specifies the calendar date
and time after which the key specified by
tmnxKeyChainAuthenticationKey will be used to sign and/or
authenticate the protocol stream.
If no date and time is set, tmnxKeyChainKeyBeginTime is represented
by a DateAndTime string with all NULLs and the key is not valid by
default.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.15.1.6 |
tmnxKeyChainKeyEndTimeThe value of tmnxKeyChainKeyEndTime specifies the calendar date and
time after which the key specified by
tmnxKeyChainAuthenticationKey is no longer eligible to sign and/or
authenticate the protocol stream.
tmnxKeyChainKeyEndTime is not applicable when
tmnxKeyChainKeyDirection is set to 'send' or 'send-receive'.
If no date and time is set, tmnxKeyChainKeyEndTime is represented by
a DateAndTime string with all NULLs and the key is valid
indefinitely.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.15.1.7 |
tmnxKeyChainKeyToleranceThe value of tmnxKeyChainKeyTolerance specifies the number of
seconds that a eligible receive key should overlap with the active
send key.
tmnxKeyChainKeyTolerance is valid only when
tmnxKeyChainKeyDirection is set to 'send-receive' or 'receive'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.15.1.8 |
tmnxKeyChainKeyAdminStateThe value of tmnxKeyChainKeyAdminState specifies the desired
administrative state of the particular key in the keychain. When the
value is 'outOfService' the keychain capabilities are disabled but the
particular key's configuration parameters are retained.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.15.1.9 |
tmnxSecurityNotificationObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.16 |
tmnxKeyChainAuthFailReasontmnxKeyChainAuthFailReason is used by tmnxKeyChainAuthFailure
to notify the reason for the keychain authentication failure.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.22.16.1 |
tmnxKeyChainAuthAddrTypeThe value of the object tmnxKeyChainAuthAddrType indicates the
address type (ipv4 or ipv6) of the source address in the
authentication packet.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.16.2 |
tmnxKeyChainAuthAddrThe value of the object tmnxKeyChainAuthAddr indicates the source
address in the authentication packet.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.16.3 |
tmnxMD5AuthFailReasontmnxMD5AuthFailReason is used by tmnxMD5AuthFailure to notify the
reason for the MD5 authentication failure.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.22.16.4 |
tmnxMD5AuthAddrTypeThe value of the object tmnxMD5AuthAddrType indicates the
address type (ipv4 or ipv6) of the source address in the
authentication packet.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.16.5 |
tmnxMD5AuthAddrThe value of the object tmnxMD5AuthAddr indicates the source
address in the authentication packet.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.22.16.6 |
tmnxMD5AuthKeyThe value of the object tmnxMD5AuthKey indicates the MD5 key used for
authentication.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.22.16.7 |
tmnxCpmProtPolIdThe value of the object tmnxCpmProtPolId indicates the policy index of
the cpm protection policy.ro TCpmProtPolicyID .1.3.6.1.4.1.6527.3.1.2.22.16.8 |
tmnxSecNotifFailureReasonThe value of the object tmnxSecNotifFailureReason indicates the reason
for the generation of the notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.16.9 |
tmnxSecNotifFileThe value of the object tmnxSecNotifFile indicates the file
associated with the notification.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.22.16.10 |
tmnxSecNotifTunnelNameThe value of the object tmnxSecNotifTunnelName indicates the name
of tunnel associated with the notification.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.16.11 |
tmnxSecNotifCertThe value of the object tmnxSecNotifCert indicates the certificate
name associated with the notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.16.12 |
tmnxSecurityCpmProtNotificationObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.17 |
tmnxCpmProtViolMacAddressThe value of tmnxCpmProtViolMacAddress indicates the MAC address
of the source.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.17.1 |
tmnxCpmProtViolMacPeriodsThe value of tmnxCpmProtViolMacPeriods indicates the number of times
the per-source rate limit violation was detected for this source.
The sampling interval length is indicated by the object
tmnxCpmProtDetectPeriod.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.22.17.2 |
tmnxPkiSecurityObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.18 |
tmnxPkiMaxCertChainDepthThe tmnxPkiMaxCertChainDepth specifies maximum depth of certificate
chain verification.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.22.18.1 |
tmnxPkiCAProfileTableLastChangedThis value of the object tmnxPkiCAProfileTableLastChanged indicates
the timestamp of the last change to the tmnxPkiCAProfileTable.
A value of zero indicates that no changes were made to this table
since the system was last initialized.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.18.2 |
tmnxPkiCAProfileTableThe tmnxPkiCAProfileTable is the Certificate-Authority profile table.
Entries are created and deleted by the user. SEQUENCE OF TmnxPkiCAProfileEntry .1.3.6.1.4.1.6527.3.1.2.22.18.3 |
tmnxPkiCAProfileEntryInformation about a single Certificate-Authority profile. TmnxPkiCAProfileEntry .1.3.6.1.4.1.6527.3.1.2.22.18.3.1 |
tmnxPkiCAProfileThe tmnxPkiCAProfile specifies the name of the Certificate-Authority
profile. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.1 |
tmnxPkiCAProfileRowStatusThe tmnxPkiCAProfileRowStatus specifies Row-Status for the
Certificate-Authority profile.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.2 |
tmnxPkiCAProfileLastChangedThe value of tmnxPkiCAProfileLastChanged is the timestamp of last
change to this row in tmnxPkiCAProfileTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.3 |
tmnxPkiCAProfileDescrThe tmnxPkiCAProfileDescr specifies the description of the
Certificate-Authority profile.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.4 |
tmnxPkiCAProfileCRLFileThe tmnxPkiCAProfileCRLFile specifies the location and name of the
Certificate Revoke List (CRL) file.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.5 |
tmnxPkiCAProfileCertFileThe tmnxPkiCAProfileCertFile specifies the location and name of the
Certificate file.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.6 |
tmnxPkiCAProfileAdminStateThe tmnxPkiCAProfileAdminState specifies the adminstrative state of
this Certificate-Authority profile.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.7 |
tmnxPkiCAProfileOperStateThe value of tmnxPkiCAProfileOperState indicates the current
operational status of this Certificate-Authority profile.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.8 |
tmnxPkiCAProfileOperFlagsThe value of tmnxPkiCAProfileOperFlags indicates the reason that this
Certificate-Authority profile is not in service. I.e.,
tmnxPkiCAProfileOperState has the value 'outOfService':
adminDown - tmnxPkiCAProfileAdminState is 'outOfService'
invalidCrl - CRL file is invalid or could not be found.
invalidCert - Cert file is invalid could not be found.ro Bits .1.3.6.1.4.1.6527.3.1.2.22.18.3.1.9 |
tmnxCertMgrStatsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.19 |
tmnxCertMgrAuthFailedThe tmnxCertMgrAuthFailed indicates the number of authentication
failures using the certificates.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.19.1 |
tmnxCertMgrAuthPassedThe tmnxCertMgrAuthPassed indicates the number of authentication
checks passed using the certificates.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.19.2 |
tmnxCertMgrTotalAuthThe tmnxCertMgrTotalAuth indicates the number of authentication
attempts using the certificates.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.22.19.3 |
tmnxUserPublicKeyObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.20 |
tmnxUserActionObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.22.21 |
tmnxUserActionUserNameThe value of tmnxUserActionUserName specifies
the user name on which the action applies.rw TNamedItemOrEmpty .1.3.6.1.4.1.6527.3.1.2.22.21.1 |
tmnxUserActionUnlockWhen tmnxUserActionUnlock is set to 'doAction',
the user specified in tmnxUserActionUserName can make again
tmnxPasswordAttemptsCount unsuccessful login attempts
before he is locked out for tmnxPasswordAttemptsLockoutPeriod minutes,
and his exponential backoff period is reset to 1 second
if slcLoginExponentialBackOff is set to 'true'.
The value of tmnxUserActionUserName must be set
to a non-empty string in the same SNMP SET PDU when setting
tmnxUserActionUnlock to 'doAction'.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.22.21.2 |
tmnxSecurityNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.22 |
tmnxSecurityNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.22.0 |
tmnxSSHServerPreserveKeyFailThe tmnxSSHServerPreserveKeyFail notification is generated when the
saving of SSH server host key on the persistent drive fails by the
CPM module.
tmnxCpmFlashId identifies the failed compact flash.
tmnxCpmFlashOperStatus indicates the status of the compact flash
reported in tmnxCpmFlashId. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.1 |
tmnxKeyChainAuthFailureThe tmnxKeyChainAuthFailure notification is generated when the
incoming packet is dropped due to key chain authentication failure.
Failure could be due to the following reasons or more:
- Send packet had not auth keychain but recv side had keychain enabled.
- Keychain key id's did not match.
- Keychain key digest mismatch
- Received packet with invalid enhanced authentication option length.
- For other causes of failure refer to 'draft-bonica-tcp-auth-05.txt'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.2 |
tmnxCpmProtViolPortThe tmnxCpmProtViolPort notification is generated when a
link-specific packet arrival rate limit violation is detected
for a port.
This notification is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.3 |
tmnxCpmProtViolPortAggThe tmnxCpmProtViolPortAgg notification is generated when a
per-port overall packet rate limit violation is detected
for a port.
This notification is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.4 |
tmnxCpmProtViolIfThe tmnxCpmProtViolIf notification is generated when a
overall packet arrival rate violation is detected
for an interface, and this notification is enabled.
This notification is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.5 |
tmnxCpmProtViolSapThe tmnxCpmProtViolSap notification is generated when a
overall packet arrival rate violation is detected
for a SAP, and this notification is enabled.
This notification is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.6 |
tmnxCpmProtViolMacThe tmnxCpmProtViolMac notification is generated when a
per-source rate limit violation was detected
for a source, and this notification is enabled.
This notification is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.7 |
tmnxCpmProtViolVdoSvcClientThe tmnxCpmProtViolVdoSvcClient notification is generated when a
per-source rate limit violation was detected for a client address of
a RTCP control traffic in VPLS service. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.8 |
tmnxCpmProtViolVdoVrtrClientThe tmnxCpmProtViolVdoVrtrClient notification is generated when a
per-source rate limit violation was detected for a client address of
a RTCP control traffic in router context. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.9 |
tmnxMD5AuthFailureThe tmnxMD5AuthFailure notification is generated when the
incoming packet is dropped due to MD5 authentication failure. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.10 |
tmnxCpmProtDefPolModifiedThe tmnxCpmProtDefPolModified notification is generated when the
user modifies a default access or default network policy. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.11 |
tmnxCpmProtViolSdpBind[CAUSE] The tmnxCpmProtViolSdpBind notification is generated when the
packet arrival rate at a mesh-sdp or spoke-sdp exceeds the SDP's
configured overall-rate.
[EFFECT] One or more packets arriving at the mesh-sdp or spoke-sdp was
discarded.
[RECOVERY] Reduce the packet transmission rate at the far end, or
increase the locally configured overall-rate for the SDP. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.12 |
tmnxCpmProtExcdSdpBind[CAUSE] The tmnxCpmProtExcdSdpBind notification is generated when a
source (identified by a MAC address) sends a packet stream to a local
mesh-sdp or spoke-sdp at a rate which exceeds the SDP's configured
per-source-rate.
[EFFECT] One or more packets arriving at the mesh-sdp or spoke-sdp was
discarded.
[RECOVERY] Reduce the packet transmission rate at the far end, or
increase the locally configured per-source-rate for the SDP. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.13 |
tmnxCpmProtExcdSapEcm[CAUSE] The tmnxCpmProtExcdSapEcm notification is generated when an
Eth-CFM packet stream (identified by a source MAC address, domain
level, and Eth-CFM opcode) arrives at a local SAP at a rate which
exceeds the configured Eth-CFM rate limit for the stream.
[EFFECT] One or more Eth-CFM packets arriving at the SAP was discarded.
[RECOVERY] Reduce the packet transmission rate at the far end, or
increase the locally configured Eth-CFM rate limit for the stream. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.14 |
tmnxCpmProtExcdSdpBindEcm[CAUSE] The tmnxCpmProtExcdSdpBindEcm notification is generated when an
Eth-CFM packet stream (identified by a source MAC address, domain
level, and Eth-CFM opcode) arrives at a local mesh-sdp or spoke-sdp
at a rate which exceeds the configured Eth-CFM rate limit for the
stream.
[EFFECT] One or more Eth-CFM packets arriving at the mesh-sdp or
spoke-sdp was discarded.
[RECOVERY] Reduce the packet transmission rate at the far end, or
increase the locally configured Eth-CFM rate limit for the stream. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.15 |
tmnxPkiFileReadFailed[CAUSE] The tmnxPkiFileReadFailed notification is generated when an
attempt to read the file fails. Reason of the failure is indicated by
the tmnxSecNotifFailureReason object.
[EFFECT] Operational status of tunnels configured to use this
certificate will be set to 'down'.
[RECOVERY] Make sure the path specified in tmnxSecNotifFile is
correct and the file exists. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.16 |
tmnxPkiCertVerificationFailed[CAUSE] The tmnxPkiCertVerificationFailed notification is generated
when an attempt to verify the certificate fails.
[EFFECT] Authentication of the tunnel configured with the certificate
will start to fail.
[RECOVERY] Make sure the certificate specified in tmnxSecNotifCert
exists and is a valid certificate. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.17 |
tmnxCAProfileStateChange[CAUSE] The tmnxCAProfileStateChange notification is generated when
Certificate Authority profile changes state to 'down' due to
tmnxSecNotifFailureReason.
[EFFECT] Certificate Authority profile will remain in this state until
a corrective action is taken.
[RECOVERY] Depending on the reason indicated by
tmnxSecNotifFailureReason, corrective action should be taken. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.18 |
tmnxCpmProtExcdSapIp[CAUSE] The tmnxCpmProtExcdSapIp notification is generated when a
source (identified by an IP address) sends a packet stream to a local
SAP at a rate which exceeds the SAP's configured per-source-rate.
[EFFECT] One or more packets arriving at the SAP was discarded.
[RECOVERY] Reduce the packet transmission rate at the far end, OR
increase the locally configured per-source-rate for the SAP, OR
disable per-IP-source rate limiting on the SAP by setting
TIMETRA-SAP-MIB::sapCpmProtMonitorIP to 'false'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.22.0.19 |