TIMETRA-PORT-MIB
AI MIB Summary
The TIMETRA-PORT-MIB provides SNMP-based provisioning and monitoring of physical port interfaces, link states, traffic counters, and error statistics on Alcatel-Lucent (now Nokia) SR OS (Service Router Operating System) devices. It enables granular control over port configuration parameters and real-time visibility into Layer 1 and Layer 2 interface performance metrics for network operations.
This document is the SNMP MIB module to manage and provision the hardware components of the Alcatel-Lucent SROS device.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
tmnxPortMIBModule.1.3.6.1.4.1.6527.1.1.3.25
672
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
672 total| Object Name |
|---|
tmnxPortMIBModuleThis document is the SNMP MIB module to manage and provision the
hardware components of the Alcatel-Lucent SROS device.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.25 |
tmnxPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.2.2 |
tmnxWaveTrackerWaveKey1The value of tmnxWaveTrackerWaveKey1 specifies the first Wavelength
Tracker Key (or Identifier) to be transmitted on the interface's
optical signal when tmnxWaveTrackerEncodeEnable is set to 'true (1)'.
The following table describes the possible tmnxWaveTrackerWaveKey1
and tmnxWaveTrackerWaveKey2 values based on ITU channel. Key1 and
Key2 must also match in modulo 2 with each other.
Index ITU Key 1 Key 2
channel First Last First Last
0 61 1548 1548 2032 2032 // 1696 Test Channel
// Original Tropic Channels (index 1 to 32)
1 59 1 15 545 559
2 58 18 32 562 576
3 57 35 49 579 593
4 56 52 66 596 610
5 54 69 83 613 627
6 53 86 100 630 644
7 52 103 117 647 661
8 51 120 134 664 678
9 49 137 151 681 698
10 48 154 168 698 712
11 47 171 185 715 729
12 46 188 202 732 746
13 44 205 219 749 763
14 43 222 236 766 780
15 42 239 253 783 797
16 41 256 270 800 814
17 39 273 287 817 831
18 38 290 304 834 848
19 37 307 321 851 865
20 36 324 338 868 882
21 34 341 355 885 899
22 33 358 372 902 916
23 32 375 389 919 933
24 31 392 406 936 950
25 29 409 423 953 967
26 28 426 440 970 984
27 27 443 457 987 1001
28 26 460 474 1004 1018
29 24 477 491 1021 1035
30 23 494 508 1038 1052
31 22 511 525 1055 1069
32 21 528 542 1072 1086
// 1696 Extension 42 channels (index 33 to 42)
33 60 1089 1103 1573 1587
34 55 1106 1120 1590 1604
35 50 1123 1137 1607 1621
36 45 1140 1154 1624 1638
37 40 1157 1171 1641 1655
38 35 1174 1188 1658 1672
39 30 1191 1205 1675 1689
40 25 1208 1222 1692 1706
41 20 1225 1239 1709 1723
42 19 1242 1256 1726 1740
// 1830 Extension to 44 channels (index 43 and 44)
43 18 1259 1273 1743 1757
44 17 1276 1290 1760 1774
// 1830 Extension to 88 channels (index 45 to 88)
45 595 1293 1307 1777 1791
46 585 1310 1324 1794 1808
47 575 1327 1341 1811 1825
48 565 1344 1358 1828 1842
49 545 1361 1375 1845 1859
50 535 1378 1392 1862 1876
51 525 1395 1409 1879 1893
52 515 1412 1426 1896 1910
53 495 1429 1443 1913 1927
54 485 1446 1460 1930 1944
55 475 1463 1477 1947 1961
56 465 1480 1494 1964 1978
57 445 1497 1511 1981 1995
58 435 1514 1528 1998 2012
59 425 1531 1545 2015 2029
60 415 1548 1562 2032 2046
61 395 3585 3599 2049 2063
62 385 3602 3616 2066 2080
63 375 3619 3633 2083 2097
64 365 3636 3650 2100 2114
65 345 3653 3667 2117 2131
66 335 3670 3684 2134 2148
67 325 3687 3701 2151 2165
68 315 3704 3718 2168 2182
69 295 3721 3735 2185 2199
70 285 3738 3752 2202 2216
71 275 3755 3769 2219 2233
72 265 3772 3786 2236 2250
73 245 3789 3803 2253 2267
74 235 3806 3820 2270 2284
75 225 3823 3837 2287 2301
76 215 3840 3854 2304 2318
77 605 3857 3871 2321 2335
78 555 3874 3888 2338 2352
79 505 3891 3905 2355 2369
80 455 3908 3922 2372 2386
81 405 3434 3448 3946 3960
82 355 3451 3465 3963 3977
83 305 3468 3482 3980 3994
84 255 3485 3499 3997 4011
85 205 3502 3516 4014 4028
86 195 3519 3533 4031 4045
87 185 3536 3550 4048 4062
88 175 3553 3567 4065 4079
DEFVAL { 0 }
::= { tmnxWaveTrackerEntry 5 }
tmnxWaveTrackerWaveKey2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4095)
MAX-ACCESS read-create
STATUS current
DESCRIPTIONrw Unsigned32 .1.3.6.1.4.1.6527.3.1.1.2.2.2.112 |
tmnxPortObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.4 |
tmnxDS3ChannelIdleCycleFlagstmnxDS3ChannelIdleCycleFlags configures the value that the
DS3 port transmits during idle cycle.
The default value applies to HDLC channels only. For ATM
channels the object does not really apply so a default value
of 'none' is used and cannot be changed.rw TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.8 |
tmnxDS3ChannelLoopbacktmnxDS3ChannelLoopback is used to put the channel into a loopback mode.
The value of tmnxPortAdminStatus should be set to 'outOfService'
in order for the loopback to be enabled.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops the frames from the local system back at
the framer.
When the value is set to 'remote', a signal is sent to the remote
system to provide a line loopback.rw TmnxDS3Loopback .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.9 |
tmnxDS3ChannelBitErrorInsertionRatetmnxDS3ChannelBitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error rate of 10^(-7), or 1 error in every 10
million bits transmitted.
If the value is set to 0, it disables the insertion of bit errors
into the BERT.
Change in this value while the test is running is accepted but
does not take effect until the test gets restarted.rw Integer32 (0 | 2..7) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.10 |
tmnxDS3ChannelBERTPatterntmnxDS3ChannelBERTPattern indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS3ChannelBERTDuration
indicates the duration of the test.
Setting the value of this object to 'none' terminates the test.rw TmnxDSXBertPattern .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.11 |
tmnxDS3ChannelBERTDurationtmnxDS3ChannelBERTDuration is used to set the duration of the
BERT test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.12 |
tmnxDS3ChannelMDLEicStringtmnxDS3ChannelMDLEicString configures the Equipment ID Code(EIC) of the
Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.13 |
tmnxDS3ChannelMDLLicStringtmnxDS3ChannelMDLLicString configures the Location ID Code(LIC) of the
Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.14 |
tmnxDS3ChannelMDLFicStringtmnxDS3ChannelMDLFicString configures the Frame ID Code(FIC) of the
Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.15 |
tmnxDS3ChannelMDLUnitStringtmnxDS3ChannelMDLUnitString configures the Unit ID Code(UIC) of the
Message Data Link (MDL).rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.16 |
tmnxDS3ChannelMDLPfiStringtmnxDS3ChannelMDLPfiString configures the Facility ID Code sent in
the Message Data Link (MDL) Path message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.17 |
tmnxDS3ChannelMDLPortStringtmnxDS3ChannelMDLPortString configures the port number string sent in
the Message Data Link (MDL) idle signal message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.18 |
tmnxDS3ChannelMDLGenStringtmnxDS3ChannelMDLGenString configures the generator number string
sent in the Message Data Link (MDL) test signal message.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.19 |
tmnxDS3ChannelMDLMessageTypetmnxDS3ChannelMDLMessageType configures the type of MDL message that
is transmitted over the DS3 interface. If the value of this object is
set to 'none', MDL messages are not transmitted.
ds3Path(0) - Enables transmission of the MDL path message.
An MDL path message, as defined by ANSI T1.107, is
distinguished from idle and test signal messages in
that it contains a facility identification code as its
final data element.
idleSignal(1) - Enables transmission of the MDL idle signal message.
An MDL idle signal message, as defined by ANSI T1.107,
is distinguished from path and test signal messages in
that it contains a port number as its final data
element.
testSignal(2) - Enables transmission of the MDL test signal message.
An MDL test signal message, as defined by ANSI T1.107,
is distinguished from path and idle signal messages in
that it contains a generator number as its final data
element.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.20 |
tmnxDS3ChannelFEACLoopRespondWhen tmnxDS3ChannelFEACLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
a value of 'false' the port will not respond.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.21 |
tmnxDS3ChannelCRCThe value of tmnxDS3ChannelCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For ATM channels, crc32 is the default and the only value supported
and applies to AAL5 CRC calculation on that channel.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.22 |
tmnxDS3ChannelMTUThe size of the largest packet which can be sent/received
on the port, specified in octets. For ports that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent on the
sonet path.
Setting tmnxDS3ChannelMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1522 with mode access and encap-type bcp-null
1526 with mode access and encap-type bcp-dot1q
1502 with mode access and encap-type ipcp
4474 with mode access and encap-type frame-relay
1524 with mode access and encap-type atm
2092 with mode access and encap-type cemrw Unsigned32 (0|512..9208) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.23 |
tmnxDS3ChannelOperMTUThe negotiated size of the largest packet which can be sent on
the channel, specified in octets. For channels that are used
for transmitting network datagrams, this is the size of the largest
network datagram that can be sent.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.24 |
tmnxDS3ChannelReportAlarmThe value of tmnxDS3ChannelReportAlarm determines when and if to
generate notifications for this channel:
ais - Reports alarm indication signal errors.
ais alarms are issued by default.
los - Reports loss of signal errors.
los alarms are issued by default.
oof - Reports out-of-frame errors.
oof alarms are not issued by default.
rai - Reports resource availability indicator events.
rai alarms are not issued by default.
looped - Reports if the far end has forced the near end to loopback.
looped alarms are not issued by default.
berSd - Reports DS3/E3 signal degradation bit errors.
berSd alarms are not issued by default.
berSf - Reports DS3/E3 signal failure bit errors.
berSf alarms are not issued by defaultrw TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.25 |
tmnxDS3ChannelReportAlarmStatusThe value of tmnxDS3ChannelReportAlarmStatus indicates the current
alarms on this port.ro TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.26 |
tmnxDS3ChannelLastChangeTimeThe tmnxDS3ChannelLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS3ChannelEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.27 |
tmnxDS3ChannelInFEACLooptmnxDS3ChannelInFEACLoop indicates whether the remote end has put
this channel in FEAC(Far End Alarm Control) loopback.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.28 |
tmnxDS3ChannelMDLMonPortStringtmnxDS3ChannelMDLMonPortString indicates the port number string
received in the Message Data Link (MDL) idle signal message.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.29 |
tmnxDS3ChannelMDLMonGenStringtmnxDS3ChannelMDLMonGenString indicates the generator number string
received in the Message Data Link (MDL) test signal message.ro DisplayString .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.30 |
tmnxDS3ChannelBERTOperStatustmnxDS3ChannelBERTOperStatus indicates the status of the BERT test
as specified by TmnxDSXBertOperStatus.ro TmnxDSXBertOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.31 |
tmnxDS3ChannelBERTSynchedtmnxDS3ChannelBERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to
the duration of the last BERT test. It is valid only after
tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.32 |
tmnxDS3ChannelBERTErrorstmnxDS3ChannelBERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS3ChannelBERTOperStatus
transitioned from 'active' to 'idle' the last time BERT
was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.33 |
tmnxDS3ChannelBERTTotalBitstmnxDS3ChannelBERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT
hardware is synchronized. It is valid only after
tmnxDS3ChannelBERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.34 |
tmnxDS3ChannelScrambleWhen tmnxDS3ChannelScramble indicates whether scrambling
is enabled on this channel. Both ends of the connection
must use the same scrambling algorithm. The default value
is 'true' if the tmnxPortEncapType is atmEncap for this
channel and indicates ATM payload scrambling; otherwise
(tmnxPortEncapType is not atmEncap) the default is 'false'
and can only be changed to true if the value of
tmnxDS3ChannelSubrateCSUMode is digital-link (1)rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.35 |
tmnxDS3ChannelAcctPolicyIdThe value of tmnxDS3ChannelAcctPolicyId specifies an existing
accounting policy to use for the ds3 channel. Accounting policies can
only be associated with network ports or channels.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this channel. A zero value indicates that there is no
accounting policy associated with this channelrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.36 |
tmnxDS3ChannelCollectStatsThe value of tmnxDS3ChannelCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds3
channel is collected.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPM will not obtain the results and
write them to the billing file.
When applying accounting policies the data by default will be collected
in the appropriate records and written to the designated billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.37 |
tmnxDS3ChannelClockSyncStateThe value of tmnxDS3ChannelClockSyncState indicates the current clock
synchronization state if tmnxDS3ChannelClockSource is 'adaptive' or
'differential'.ro TmnxDSXClockSyncState .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.38 |
tmnxDS3ChannelClockMasterPortIdThe value of tmnxDS3ChannelClockMasterPortId indicates the current
clock synchronization master port id if tmnxDS3ChannelClockSource
is 'adaptive' or 'differential'.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.11.1.39 |
tmnxDS1TableThe tmnxDS1Table has an entry for each DS1 channel. SEQUENCE OF TmnxDS1Entry .1.3.6.1.4.1.6527.3.1.2.2.4.12 |
tmnxDS1EntryEach row entry represents a DS1 channel on a IOM card
in a chassis in the system. DS1 channel entries for DS3
ports cannot be created and deleted via SNMP SET operations.
Entries in this table will be created automatically when
tmnxDS3ChannelChannelized is set to 'true'. DS1 channel entries
for DS1 ports can be created and deleted via SNMP SET operations.
For each tmnxDS1Entry, there will be a corresponding entry
in the tmnxPortTable and the ifTable. TmnxDS1Entry .1.3.6.1.4.1.6527.3.1.2.2.4.12.1 |
tmnxDS1RowStatustmnxDS1RowStatus controls the creation and deletion of
row entries in the tmnxDS1Table.
For row creation, the manager has to first calculate the
tmnxPortPortID based on the TiMOS encoding scheme.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.1 |
tmnxDS1TypeThe value of tmnxDS1Type indicates whether the DS1 channel is
in DS1, E1 or J1 mode.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.2 |
tmnxDS1FramingThe value of tmnxDS1Framing indicates the type of framing associated
with the channel:
esf ESF (extended super frame) mode for T1 interfaces.
sf SF (super frame) mode for T1 interfaces.
g704 G.704 framing format for E1 interfaces.
g704-no-crc4 G.704 framing with no CRC4 for E1 interfaces.
e1-unframed E1 Unframed (G.703) mode for E1 interfaces.
ds1-unframed Unframed mode for T1 interfaces.
If tmnxDS1Type is set to 'ds1', the default framing is 'esf'.
If tmnxDS1Type is set to 'e1', the default framing is 'g704'.
Changing the value of tmnxDS1Framing resets the values of
tmnxDS1BerSdThreshold and tmnxDS1BerSfThreshold to defaults
and turns off reporting of berSd and berSf alarms
in tmnxDS1ReportAlarm.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.3 |
tmnxDS1IdleCycleFlagstmnxDS1IdleCycleFlags configures the value that the DS1
channel transmits during idle cycle.rwobsolete TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.4 |
tmnxDS1LoopbacktmnxDS1Loopback is used to put the channel into a loopback mode. The
value of tmnxPortAdminStatus should be set to 'outOfService' in order
for the loopback to be enabled.
A 'line' loopback loops frames received on this port back to the
remote system.
A 'internal' loopback loops frames from the local system back at
the framer.
A 'fdlAnsi' requests loopback of type FDL ANSI T1.403. This is valid
with tmnxDS1Framing set to 'esf' framing.
A 'fdlBellcore' requests loopback of type FDL Bellcore TR-TSY-000312.
This is valid with tmnxDS1Framing set to 'esf'.
A 'inbandAnsi' requests loopback of type inband ANSI T1.403. This is
valid with tmnxDS1Framing set to 'sf'.rw TmnxDS1Loopback .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.5 |
tmnxDS1InvertDataSetting tmnxDS1InvertData to 'true' causes all data bits to
be inverted, to guarantee ones density. It is typically used with
AMI line encoding.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.6 |
tmnxDS1BitErrorInsertionRatetmnxDS1BitErrorInsertionRate is used to insert bit errors for a
BERT test. The number of error corresponds to 10^(-rate). A rate of 7
will cause an error rate of 10^(-7), or 1 error in every 10
million bits transmitted.
If the value is set to 0, disables the insertion of bit errors into
the BERT.
Change in this value while the test is running is accepted but
does not take effect until the test gets restarted.rw Integer32 (0 | 2..7) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.7 |
tmnxDS1BERTPatterntmnxDS1BERTPattern object indicates the pattern used for the
Bit Error Rate Test (BERT). The value of tmnxDS1BERTDuration
indicates the duration of the test.
Setting the value to 'none' terminates the test.rw TmnxDSXBertPattern .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.8 |
tmnxDS1BERTDurationtmnxDS1BERTDuration is used to set the duration of the BERT test.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.9 |
tmnxDS1ReportAlarmThe value of tmnxDS1ReportAlarm determines when and if to
generate notifications for this channel:
ais - Reports alarm indication signal errors.
ais alarms are issued by default.
los - Reports loss of signal errors.
los alarms are issued by default.
oof - Reports out-of-frame errors.
oof alarms are not issued by default.
rai - Reports resource availability indicator events.
rai alarms are not issued by default.
looped - Reports if the far end has forced the near end to loopback.
looped alarms are not issued by default.
berSd - Reports DS1/E1/J1 signal degradation bit errors.
berSd alarms are not issued by default.
berSf - Reports DS1/E1/J1 signal failure bit errors.
berSf alarms are not issued by defaultrw TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.10 |
tmnxDS1ReportAlarmStatusThe value of tmnxDS1ReportAlarmStatus indicates the current alarms
on this channel.ro TmnxDSXReportAlarm .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.11 |
tmnxDS1LastChangeTimeThe tmnxDS1LastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS1Entry row for this channel.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.12 |
tmnxDS1ClockSourcetmnxDS1ClockSource configures the clock for transmitted data from
either the internal clock ('nodeTimed'), or from a clock recovered
from the line's receive data stream ('loopTimed'), or recovered
adaptively from the rate at which the data that is received and not
from the physical layer ('adaptive'), or recovered from the
differential timestamp in the RTP header ('differential').rw TmnxDSXClockSource .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.13 |
tmnxDS1BERTOperStatustmnxDS1BERTOperStatus indicates the status of the BERT test as
specified by TmnxDSXBertOperStatus.ro TmnxDSXBertOperStatus .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.14 |
tmnxDS1BERTSynchedtmnxDS1BERTSynched is the number of seconds for which the
BERT hardware was synchronized. This will be less than or equal to
the duration of the last BERT test. It is valid only after
tmnxDS1BERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.15 |
tmnxDS1BERTErrorstmnxDS1BERTErrors is the number of bit errors detected during
the last BERT test. It is valid only after tmnxDS1BERTOperStatus
transitioned from 'active' to 'idle' the last time BERT
was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.16 |
tmnxDS1BERTTotalBitstmnxDS1BERTTotalBits is the total number of bits received
during the last BERT test. Bits are only counted when the BERT
hardware is synchronized. It is valid only after
tmnxDS1BERTOperStatus transitioned from 'active' to 'idle'
the last time BERT was activated.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.17 |
tmnxDS1RemoteLoopRespondWhen tmnxDS1RemoteLoopRespond has a value of 'true', the channel
is enabled to respond to remote loop signals. When it has
a value of 'false' the port will not respond.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.18 |
tmnxDS1InRemoteLooptmnxDS1InRemoteLoop indicates whether the remote end has put
this channel in remote loopback.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.19 |
tmnxDS1InsertSingleBitErrortmnxDS1InsertSingleBitError is used to insert a single bit error for a
BERT test.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.20 |
tmnxDS1SignalModeThe value of tmnxDS1SignalMode indicates the type of signalling
associated with the channel:
none - Indicates no signalling on this channel.
cas - Indicates Channel Associated Signalling (CAS) on this channel.
The default signalling is 'none'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.21 |
tmnxDS1ClockSyncStateThe value of tmnxDS1ClockSyncState indicates the current clock
synchronization state if tmnxDS1ClockSource is 'adaptive' or
'differential'.ro TmnxDSXClockSyncState .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.22 |
tmnxDS1ClockMasterPortIdThe value of tmnxDS1ClockMasterPortId indicates the current clock
synchronization master port id if tmnxDS1ClockSource is 'adaptive'
or 'differential'.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.23 |
tmnxDS1BerSdThresholdThe value of tmnxDS1BerSdThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm
notification for a BER SD failure and a tmnxEqPortDS1AlarmClear
notification for a BER SD failure clear. Bit error computed must
reach/exceed threshold value over a pre-defined period of time
for the tmnxEqPortSonetAlarm notification to be sent.
The value of tmnxDS1Framing defines how the bit error is
computed and what values of tmnxDS1BerSdThreshold are allowed.
The following table defines this dependency:
tmnxDS1Framing Bit error calculation and value supported
esf (1) each CRC error is counted as one bit error
g704 (4) values supported are 1,5,10,50,100
other values bit error alarms not supported, value
of tmnxDS1BerSdThreshold set to default and
cannot be changed
tmnxDS1BerSdThreshold value must not exceed the value of
tmnxDS1BerSfThreshold.rw Unsigned32 (1|5|10|50|100) UNITS "error bits in million bits received" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.24 |
tmnxDS1BerSfThresholdThe value of tmnxDS1BerSfThreshold specifies a bit error rate (BER)
threshold used to determine when to send a tmnxEqPortDS1Alarm
notification for a BER SF failure and a tmnxEqPortDS1AlarmClear
notification for a BER SF failure clear. Bit error computed must
reach/exceed threshold value over a pre-defined period of time
for the tmnxEqPortSonetAlarm notification to be sent.
The value of tmnxDS1Framing defines how the bit errors are
computed and what values of tmnxDS1BerSfThreshold are allowed.
The following table defines this dependency:
tmnxDS1Framing Bit error calculation and value supported
esf (1) each CRC error is counted as one bit error
g704 (4) values supported are 1,5,10,50,100
other values bit error alarms not supported, value
of tmnxDS1BerSfThreshold set to default and
cannot be changed
tmnxDS1BerSfThreshold value must not be smaller than
tmnxDS1BerSdThreshold valuerw Unsigned32 (1|5|10|50|100) UNITS "error bits in million bits received" .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.25 |
tmnxDS1NationalUseBitsThe tmnxDS1NationalUseBits specifies the transmitted value for each of
the E1 national use bits (Sa4 to Sa8). This object is only
applicable on E1 channels with tmnxDS1Framing set to g704-no-crc (3),
or g704 (4).rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.12.1.26 |
tmnxDS0ChanGroupTableThe tmnxDS0ChanGroupTable has an entry for DS0 channels
grouped together and belonging to a particular DS1 channel. SEQUENCE OF TmnxDS0ChanGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.13 |
tmnxDS0ChanGroupEntryEach row entry represents one or more DS0 channels on a
DS1 interface. tmnxDS0ChanGroupTimeSlots object is used to add or
remove DS0 channels from the group.
Entries can be created and deleted via SNMP SET operations
using the tmnxDS0ChanGroupRowStatus object.
For each tmnxDS0ChanGroupEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable. TmnxDS0ChanGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.13.1 |
tmnxDS0ChanGroupRowStatustmnxDS0ChanGroupRowStatus controls the creation and deletion of
row entries in the tmnxDS0ChanGroupTable. The tmnxPortPortID
for a channel group includes a group ID in the lower bits.
The manager has to first calculate the tmnxPortPortID based on the
TiMOS encoding scheme.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.1 |
tmnxDS0ChanGroupTimeSlotstmnxDS0ChanGroupTimeSlots is a bitmap which is used to
add/remove DS0 timeslots from a channel group.
The description for TmnxDs0ChannelList contains details of the
bitmap organization.
When a channel group is created on unframed DS1/E1, all timeslots
as applicable to a given speed are auto-allocated and cannot be
changed.
When a channel group is created on a framed DS1/E1 or
existing channel group's encapsulation is changed from ATM,
the default of no timeslots is auto-assigned to the group.
When a channel group on a framed DS1/E1 is configured for
ATM encapsulation, the ATM defaults of 0x00FFFFFF (DS1)
and 0XFFFEFFFE (E1) are auto-assigned and cannot be changed.rw TmnxDs0ChannelList .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.2 |
tmnxDS0ChanGroupSpeedtmnxDS0ChanGroupSpeed configures the required link speed
for all the time slots included in this channel group.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.3 |
tmnxDS0ChanGroupCRCThe value of tmnxDS0ChanGroupCRC variable indicates the precision of
the cyclic redundancy check. A value of 'crc16' is a 16-bit
CRC calculation. A value of 'crc32' is a 32-bit CRC
calculation. 32-bit CRC increases the error detection ability,
but it also adds some performance overhead.
For channel groups with encapsulation set to ATM, the default and
only supported value is crc32 and applies to AAL5 CRC calculations
on that channel group.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.4 |
tmnxDS0ChanGroupMTUThe size of the largest packet which can be sent/received
on the channel group, specified in octets. For groups that
are used for transmitting network datagrams, this is the
size of the largest network datagram that can be sent.
Setting tmnxDS0ChanGroupMTU to a value of zero (0), causes the agent
to recalculate the default MTU size which can vary based on the
current setting of tmnxPortMode and tmnxPortEncapType variables.
Some typical default values are:
1522 with mode access and encap-type bcp-null
1526 with mode access and encap-type bcp-dot1q
1502 with mode access and encap-type ipcp
4474 with mode access and encap-type frame-relay
1524 with mode access and encap-type atm
2092 with mode access and encap-type cemrw Unsigned32 (0|512..9208) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.5 |
tmnxDS0ChanGroupOperMTUThe negotiated size of the largest packet which can be sent on
the channel group, specified in octets. For channel groups that
are used for transmitting network datagrams, this is the size of
the largest network datagram that can be sent.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.6 |
tmnxDS0ChanGroupLastChangeTimeThe tmnxDS0ChanGroupLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS0ChanGroupEntry row for this channel group.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.7 |
tmnxDS0ChanGroupIdleCycleFlagstmnxDS0ChanGroupIdleCycleFlags configures the value that the
channel group transmits during idle cycle.
The default value applies to HDLC channels only. For ATM and CEM
channels the object does not really apply so a default value of
'none' is used and cannot be changed.rw TmnxDSXIdleCycleFlags .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.8 |
tmnxDS0ChanGroupScrambletmnxDS0ChanGroupScramble indicates whether payload scrambling
is enabled on this ATM channel. Both ends of the connection
must use the same scrambling algorithm. The default value
is 'true' if the tmnxPortEncapType is atmEncap for this
channel, otherwise the default is 'false' and not allowed to
change.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.9 |
tmnxDS0ChanGroupAcctPolicyIdThe value of tmnxDS0ChanGroupAcctPolicyId specifies an existing
accounting policy to use for the ds0 channel-group. Accounting policies
can only be associated with network ports or channels.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this channel-group. A zero value indicates that there
is no accounting policy associated with this channelrw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.10 |
tmnxDS0ChanGroupCollectStatsThe value of tmnxDS0ChanGroupCollectStats specifies whether or not the
collection of accounting and statistical data for the network ds0
channel-group is collected.
When the value is set to false, the statistics are still accumulated
by the IOM cards, however, the CPM will not obtain the results and
write them to the billing file.
When applying accounting policies the data by default will be collected
in the appropriate records and written to the designated billing file.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.11 |
tmnxDS0ChanGroupPayloadFillTypeThe value of tmnxDS0ChanGroupPayloadFillType specifies the type of
idle payload fill to be sent when the CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupPayloadPattern is used to define the payload pattern.
The default value depends on the encap type of the channel group:
For CEM encap - 'allOnes'
For all other encaps - 'notApplicable'
For a ds1-unframed and e1-unframed CEM encap DS0 channel group the
only supported value is 'allOnes'.
For non-CEM encap channel groups the value cannot be changed.rw TmnxDSXIdleFillType .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.12 |
tmnxDS0ChanGroupPayloadPatternThe value of tmnxDS0ChanGroupPayloadPattern specifies the idle payload
fill pattern when the CEM channel group experiences an underrun and
tmnxDS0ChanGroupPayloadFillType is set to 'userDefinedPattern'.
The default value depends on the encap type of the channel group:
For CEM encap channel group - 255 (Valid range 0..255)
For non-CEM encap channel group - 0 (Valid range 0..0).rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.13 |
tmnxDS0ChanGroupSignalFillTypeThe value of tmnxDS0ChanGroupSignalFillType specifies the type of
idle signal fill to be sent when the CAS CEM channel group experiences
an underrun.
If the type is set to 'userDefinedPattern' then the value of
tmnxDS0ChanGroupSignalPattern is used to define the signal pattern.
The default value depends on the encap of the DS0 channel group and
the signal-mode of the DS1/E1:
For CEM encap on DS1/E1 with CAS signal mode - 'allOnes'
For all other encaps or non-CAS CEM DS1/E1 - 'notApplicable'
For CEM channel groups on DS1/E1 with no CAS signalling and non-CEM
encap channel groups the value cannot be changed.rw TmnxDSXIdleFillType .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.14 |
tmnxDS0ChanGroupSignalPatternThe value of tmnxDS0ChanGroupSignalPattern specifies the idle signal
fill pattern when the CAS CEM channel group experiences an underrun
and tmnxDS0ChanGroupSignalFillType is set to 'userDefinedPattern'.
CAS ESF DS1 and CAS E1 support 4 signalling bits per timeslot (ABCD)
CAS SF DS1 supports 2 signalling bits per timeslot (AB)
The default value depends on the type of channel group:
For CAS DS1 ESF or CAS E1 channel group - 15 (Valid range 0..15)
For CAS DS1 SF channel group - 3 (Valid range 0..3)
For non-CAS or non-CEM channel group - 0 (Valid range 0..0)rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.15 |
tmnxDS0ChanGroupBerSfLinkDownThe value of tmnxDS0ChanGroupBerSfLinkDown specifies whether or not
the DS0 channel-group will become operationally down when a BER-SF
alarm is raised. If tmnxDS0ChanGroupBerSfLinkDown is false then the
channel-group will not operationally change state due to BER-SF
alarms.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.13.1.16 |
tmnxBundleTableThe tmnxBundleTable has an entry for a bundle created on the system. SEQUENCE OF TmnxBundleEntry .1.3.6.1.4.1.6527.3.1.2.2.4.14 |
tmnxBundleEntryEach row entry represents a multilink bundle on a MDA.
Entries can be created and deleted via SNMP SET operations
using the tmnxBundleRowStatus object. The tmnxBundleBundleID will
contain the bundle number encoded in it. The bundle number is
unique for a MDA.
For each tmnxBundleEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable. TmnxBundleEntry .1.3.6.1.4.1.6527.3.1.2.2.4.14.1 |
tmnxBundleBundleIDtmnxBundleBundleID identifies this multilink bundle. The value of
this object is calculated using the TiMOS encoding scheme described
in TmnxBundleID.
tmnxBundleBundleID is used as an index into the ifTable and the
tmnxPortTable to access an entry corresponding to this entry. TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.1 |
tmnxBundleRowStatustmnxBundleRowStatus controls the creation and deletion of
row entries in the tmnxBundleTable.
The manager has to first calculate the tmnxBundleBundleID
based on the TiMOS encoding.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.2 |
tmnxBundleTypetmnxBundleType specifies the type of this multilink bundle.
It provides a reference as to the type of bundle this row
refers to but does not map to the direct value of
bndle type defined in TmnxBundleID.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.3 |
tmnxBundleMinimumLinkstmnxBundleMinimumLinks is the minimum number of links that must be
active for a bundle to be active. If the number of links drop below
the given minimum then the multilink bundle will transition to an
operation down state.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.4 |
tmnxBundleNumLinkstmnxBundleNumLinks indicates the total number of links configured
for this bundle.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.5 |
tmnxBundleNumActiveLinkstmnxBundleNumActiveLinks indicates the current number of active links
belonging to this bundle.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.6 |
tmnxBundleMRRUtmnxBundleMRRU is used to configure the
Max Received Reconstructed Unit (MRRU). This is the maximum frame that
can be reconstructed from multilink fragments.
This object is only applicable to tmnxBundleType value of mlppp.
All non applicable types have a value of zero.rw Unsigned32 (0|1500..9206) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.7 |
tmnxBundleOperMRRUtmnxBundleOperMRRU indicates the operational value of
Max Received Reconstructed Unit (MRRU).
This object is only applicable to tmnxBundleType value of mlppp.
All non applicable types have a value of zero.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.8 |
tmnxBundlePeerMRRUtmnxBundlePeerMRRU indicates the MRRU value sent by the peer
during negotiation.
This object is only applicable to tmnxBundleType value of mlppp.
All non applicable types have a value of zero.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.9 |
tmnxBundleOperMTUtmnxBundleOperMTU indicates the operational MTU of the bundle.ro Unsigned32 UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.10 |
tmnxBundleRedDiffDelaytmnxBundleRedDiffDelay configures the maximum acceptable differential
delay for individual circuits within this multilink bundle. If
the delay exceeds this threshold, a tmnxEqPortBndlRedDiffExceeded
trap is issued.
For a tmnxBundleType value of 'imagrp' a range of 0 to 50 is supported,
0 to 25 otherwise.rw Unsigned32 (0..25|0..50) UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.11 |
tmnxBundleRedDiffDelayActiontmnxBundleRedDiffDelayAction specifies the action to be taken
when the differential delay exceeds the threshold configured in
tmnxBundleRedDiffDelay.
For a tmnxBundleType value of 'imagrp', only the down action is
supported.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.12 |
tmnxBundleYellowDiffDelaytmnxBundleYellowDiffDelay configures the yellow warning
threshold for the differential delay for the circuits
within a given multilink bundle. If the delay exceeds this
threshold, a tmnxEqPortBndlYellowDiffExceeded trap is issued.
This object is only applicable to tmnxBundleType values of
'mlppp' or 'mlfr'. All non applicable types have a value
of zero.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.13 |
tmnxBundleShortSequencetmnxBundleShortSequence command specifies that the MLPPP bundle
should use short (12 bit) sequence numbers. Instead of the
standard long (24 bits) sequence number.
This object is only applicable to tmnxBundleType value of mlppp.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.14 |
tmnxBundleLastChangeTimeThe tmnxBundleLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxBundleEntry row for this channel group.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.15 |
tmnxBundleFragmentThresholdThe value of tmnxBundleFragmentThreshold specifies the maximum length
of a fragment transmitted across the multilink bundle. Values supported
within each bundle type are hardware dependent. The value of 0
specifies no fragmentation.
Currently, the following values are supported depending upon the
tmnxBundleType value:
tmnxBundleType tmnxBundleFragmentThreshold values supported
mlppp 0; 128 to 512 inclusive
imagrp 128
mlfr 0; 128 to 512 inclusiverw Unsigned32(0|128..512) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.16 |
tmnxBundleUpTimetmnxBundleUpTime indicates the time since the bundle is operationally
'inService'.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.17 |
tmnxBundleInputDiscardstmnxBundleInputDiscards indicates the number of LCP packets that
were discarded. This object is only supported for a
tmnxBundleType value of mlppp.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.18 |
tmnxBundlePrimaryMemberPortIDtmnxBundlePrimaryMemberPortID indicates the TmnxPortID of the primary
member of this bundle. The value of this object will be zero if
there are no members configured in this bundle.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.19 |
tmnxBundleLFItmnxBundleLFI specifies if Link Fragmentation and
Interleaving is enabled on the multilink bundle. A value of 'false'
indicates that Link Fragmentation and Interleaving is disabled on the
multilink bundle while a value of 'true' indicates that Link
Fragmentation and Interleaving is enabled on the multilink bundle.
This object is only supported for tmnxBundleType value of mlppp.
The value of tmnxBundleLFI may be modified only when no members are
part of the bundle.
This object cannot be set to true when tmnxBundleMlpppClassCount object
value is set to enable Multiclass MLPPP on the bundle.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.20 |
tmnxBundleProtectedTypetmnxBundleProtectedType identifies how this bundle is part
of a tmnxBundleParentBundle. A value of 'none' identifies no
protection, 'working' identifies it to be a working bundle of a
tmnxBundleParentBundle and 'protection' identifies it to be a
protection bundle of a tmnxBundleParentBundle.
tmnxBundleProtectedType can only be set at row creation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.21 |
tmnxBundleParentBundletmnxBundleParentBundle specifies the parent to which this bundle
belongs. A row for the given non zero walue of tmnxBundleParentBundle
must exist for this row to be successfully created. If a bundle has no
parent, its value is zero. tmnxBundleParentBundle can only be set at
row creation.rw TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.14.1.22 |
tmnxBundleMemberTableThe tmnxBundleMemberTable has an entry for a member port
associated with a multilink bundle. SEQUENCE OF TmnxBundleMemberEntry .1.3.6.1.4.1.6527.3.1.2.2.4.15 |
tmnxBundleMemberEntryEach row represents a port associated with a bundle. Entries
can be added or removed from this table using SNMP SET operation. TmnxBundleMemberEntry .1.3.6.1.4.1.6527.3.1.2.2.4.15.1 |
tmnxBundleMemberRowStatustmnxBundleMemberRowStatus controls the creation and deletion of
row entries in the tmnxBundleMemberTable.
tmnxPortPortID identifies the port to be associated with the bundle.
A bundle entry with tmnxBundleBundleID has to exist in the
tmnxBundleTable before creating an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.1 |
tmnxBundleMemberActivetmnxBundleMemberActive is set to 'false' for one of reasons in
tmnxBundleMemberDownReason.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.2 |
tmnxBundleMemberDownReasontmnxBundleMemberDownReason contains the reason code for marking
the member link of the bundle to down (i.e. tmnxBundleMemberActive
will be set to false):
none - The link is active and the value of tmnxBundleMemberActive
is 'true'.
outOfService - The link operational status is down.
redDiffDelayExceeded - The differential delay of the link
exceeded the configured value of red differential delay
and tmnxBundleRedDiffDelayAction was configured as 'down'.
mismatchEndPtDiscriminator - Detected inconsistent peer endpoint
discriminator for the bundle.
peerNotBundleMember - When the peer is either not added to the
bundle or is removed from the bundle.
underNegotiation - When the local end is trying to negotiate with
the peer.
peerInvalidMlHdrFmt - The peer does not support the required ML-PPP
header format. The remote peer must support the same
short/long sequence code, and at least as many classes as
configured for the local bundle.
other - Refer to the corresponding member table, if any, for more
information based on the tmnxBundleType.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.3 |
tmnxBundleMemberUpTimetmnxBundleMemberUpTime indicates the time since the bundle member is
active as indicated by tmnxBundleMemberActive.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.2.4.15.1.4 |
tmnxPortToChannelTableThe tmnxPortToChannelTable is a mapping table. Given a chassis index,
physical port index and channel string, it maps it to the index
of the channel. This channel index can then be used as an index
into the ifTable or the tmnxPortTable. SEQUENCE OF TmnxPortToChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.16 |
tmnxPortToChannelEntryEach row represents a mapping of the physical port index and the
channel index string to the index of the channel. TmnxPortToChannelEntry .1.3.6.1.4.1.6527.3.1.2.2.4.16.1 |
tmnxChannelIdxStringtmnxChannelIdxString is an index into the table. It contains
a string identifying a channel on the physical port. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.16.1.1 |
tmnxChannelPortIDtmnxChannelPortID contains the port ID of the channel. This value
is used to identify the entry for this channel in the ifTable or
the tmnxPortTable.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.16.1.2 |
tmnxPortIngrMdaQosStatTableThe table tmnxPortIngrMdaQosStatTable contains a row for each ethernet
or SONET/SDH port located on an oversubscribed MDA.
Each object in a row refers to a QoS priority and forwarding class,
which is a decimal value between 00 and 15 inclusive. The following
table describes each decimal value:
| Priority
|
Forwarding Class | High Low
NC (Network Control) | 00 01
H1 (Voice) | 02 03
EF (Premium) | 04 05
H2 (Video) | 06 07
L1 (Management) | 08 09
AF (Assured) | 10 11
L2 (Priority) | 12 13
BE (Best Effort) | 14 15 SEQUENCE OF TmnxPortIngrMdaQosStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.17 |
tmnxPortIngrMdaQosStatEntryEach row indicates the MDA QoS discard statistics on an ethernet or
SONET/SDH port located on an oversubscribed MDA. For ethernet ports,
the tmnxPortEtherIngressRate object indicates the ingress shaping
rate configured. TmnxPortIngrMdaQosStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.17.1 |
tmnxPortIngrMdaQos00StatDropPktstmnxPortIngrMdaQos00StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
00 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.1 |
tmnxPortIngrMdaQos00StatDropOctstmnxPortIngrMdaQos00StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
00 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.2 |
tmnxPortIngrMdaQos01StatDropPktstmnxPortIngrMdaQos01StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
01 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.3 |
tmnxPortIngrMdaQos01StatDropOctstmnxPortIngrMdaQos01StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
01 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.4 |
tmnxPortIngrMdaQos02StatDropPktstmnxPortIngrMdaQos02StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
02 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.5 |
tmnxPortIngrMdaQos02StatDropOctstmnxPortIngrMdaQos02StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
02 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.6 |
tmnxPortIngrMdaQos03StatDropPktstmnxPortIngrMdaQos03StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
03 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.7 |
tmnxPortIngrMdaQos03StatDropOctstmnxPortIngrMdaQos03StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
03 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.8 |
tmnxPortIngrMdaQos04StatDropPktstmnxPortIngrMdaQos04StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
04 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.9 |
tmnxPortIngrMdaQos04StatDropOctstmnxPortIngrMdaQos04StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
04 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.10 |
tmnxPortIngrMdaQos05StatDropPktstmnxPortIngrMdaQos05StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
05 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.11 |
tmnxPortIngrMdaQos05StatDropOctstmnxPortIngrMdaQos05StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
05 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.12 |
tmnxPortIngrMdaQos06StatDropPktstmnxPortIngrMdaQos06StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
06 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.13 |
tmnxPortIngrMdaQos06StatDropOctstmnxPortIngrMdaQos06StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
06 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.14 |
tmnxPortIngrMdaQos07StatDropPktstmnxPortIngrMdaQos07StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
07 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.15 |
tmnxPortIngrMdaQos07StatDropOctstmnxPortIngrMdaQos07StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
07 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.16 |
tmnxPortIngrMdaQos08StatDropPktstmnxPortIngrMdaQos08StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
08 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.17 |
tmnxPortIngrMdaQos08StatDropOctstmnxPortIngrMdaQos08StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
08 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.18 |
tmnxPortIngrMdaQos09StatDropPktstmnxPortIngrMdaQos09StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
09 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.19 |
tmnxPortIngrMdaQos09StatDropOctstmnxPortIngrMdaQos09StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
09 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.20 |
tmnxPortIngrMdaQos10StatDropPktstmnxPortIngrMdaQos10StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
10 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.21 |
tmnxPortIngrMdaQos10StatDropOctstmnxPortIngrMdaQos10StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
10 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.22 |
tmnxPortIngrMdaQos11StatDropPktstmnxPortIngrMdaQos11StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
11 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.23 |
tmnxPortIngrMdaQos11StatDropOctstmnxPortIngrMdaQos11StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
11 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.24 |
tmnxPortIngrMdaQos12StatDropPktstmnxPortIngrMdaQos12StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
12 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.25 |
tmnxPortIngrMdaQos12StatDropOctstmnxPortIngrMdaQos12StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
12 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.26 |
tmnxPortIngrMdaQos13StatDropPktstmnxPortIngrMdaQos13StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
13 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.27 |
tmnxPortIngrMdaQos13StatDropOctstmnxPortIngrMdaQos13StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
13 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.28 |
tmnxPortIngrMdaQos14StatDropPktstmnxPortIngrMdaQos14StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
14 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.29 |
tmnxPortIngrMdaQos14StatDropOctstmnxPortIngrMdaQos14StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
14 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.30 |
tmnxPortIngrMdaQos15StatDropPktstmnxPortIngrMdaQos15StatDropPkts indicates the number of packets
dropped on the oversubscribed MDA for QoS classifier result threshold
15 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.31 |
tmnxPortIngrMdaQos15StatDropOctstmnxPortIngrMdaQos15StatDropOcts indicates the number of octets
dropped on the oversubscribed MDA for QoS classifier result threshold
15 because of an overload condition on the MDA.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.17.1.32 |
tmnxSonetGroupTableThe tmnxSonetGroupTable has an entry for each
Tributary Unit Group(TUG3) on a path. On a port which supports
unchannelized STS-3's, rows in this table are created when a
channelized STS-3 has its tmnxSonetPathChildType set to sdhTug3.
On a port which does not support unchannelized STS-3's, the rows
in this table are implicitly created when a STS-3 is created
in the tmnxSonetPathTable. Entries in this table are implicitly
deleted when the parent entry of this group is deleted from the
tmnxSonetPathTable or if the tmnxSonetPathChildType of the parent
is set to something other than sdhTug3. SEQUENCE OF TmnxSonetGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.18 |
tmnxSonetGroupEntryEach row entry represents a Tributary Unit Group(TUG3) on a path. TmnxSonetGroupEntry .1.3.6.1.4.1.6527.3.1.2.2.4.18.1 |
tmnxSonetGroupTypetmnxSonetGroupType indicates the sonet group type of this entry.
For STS-3/STM-1 channelization, the value of this object will
be 'sdhTug3'.ro TmnxMDAChanType .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.1 |
tmnxSonetGroupParentPortIDtmnxSonetGroupParentPortID indicates the TmnxPortID of the parent of
this group.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.2 |
tmnxSonetGroupChildTypetmnxSonetGroupChildType is used to configure the type of the children
of this group. Based on the value of this object, entries of
a certain channel type can be created in the tmnxSonetPathTable.
For example, if the value of this object is set to 'sonetVt15',
then 28 entries of type 'sonetVt15' can be created in
the tmnxSonetPathTable.rw TmnxMDAChanType .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.3 |
tmnxSonetGroupNametmnxSonetGroupName is the textual name for this sonet group.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.18.1.4 |
tmnxPortScalarObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.4.19 |
tmnxL4LoadBalancingThe value of tmnxL4LoadBalancing specifies whether layer 4 information,
src and dst ports, should be used in the LAG and ECMP hashing
algorithm. This is the global system setting that all ports will
inherit. When set to 'true', src and dst ports are used in the hashing
algorithm. The per port setting of tmnxPortLoadBalanceAlgorithm can
override tmnxL4LoadBalancing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.19.1 |
tmnxLsrIpLoadBalancingThe value of tmnxLsrIpLoadBalancing specifies whether the IP Header is
used in the LAG and ECMP LSR hashing algorithm. This is the global
system setting that all ports will inherit. When set to 'label-ip (2)',
the IP Header is included in the hashing algorithm. When set to
'ip-only (3)' the IP Header is used exclusively in the hashing
algorithm.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.19.2 |
tmnxIpLoadBalancingThe value of tmnxIpLoadBalancing specifies whether or not this node's
system IP address is used in the final stage of the load balancing
(hashing) algorithm used to choose the LAG member or ECMP route for an
outbound packet.
If 'systemIp(2)' is selected, this node's system IP address (i.e.
TIMETRA-VRTR-MIB::vRiaIpAddress.1.1.1) is used in the final stage of
the LAG and ECMP load balancing algorithm. This selection makes it
more likely that different SROS nodes in a network will make different
load balancing decisions. 'systemIp(2)' is supported on iom3-xp IOMs,
equivalent IMMs, and newer IOM and IMM types. When older IOMs/IMMs are
present in a system which has 'systemIp(2)' configured, the older IOMs
operate in 'standard(1)' mode.
If 'standard(1)' is selected, this node's system IP address is not used
in the final stage of the LAG and ECMP load balancing algorithm.
'standard(1)' is supported on all IOM and IMM types.
The earlier stages of the load balancing algorithm are controlled by
tmnxL4LoadBalancing and tmnxLsrIpLoadBalancing (when applicable).rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.19.3 |
tmnxCiscoHDLCTableThe tmnxCiscoHDLCTable has an entry for each port in the system
that is configured for Cisco HDLC. It contains the parameters related
to Cisco HDLC protocol on this port. SEQUENCE OF TmnxCiscoHDLCEntry .1.3.6.1.4.1.6527.3.1.2.2.4.20 |
tmnxCiscoHDLCEntryThe tmnxCiscoHDLCEntry specifies parameters for a particular
interfaces running Cisco HDLC encapsulation. Entries cannot be created
and deleted via SNMP SET operations. TmnxCiscoHDLCEntry .1.3.6.1.4.1.6527.3.1.2.2.4.20.1 |
tmnxCiscoHDLCKeepAliveInttmnxCiscoHDLCKeepAliveInt specifies the interval in seconds
used for sending periodic keepalive packets. The default value is set
to 10 seconds. A value of 0 specifies that the keepalive function is
turned off.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.1 |
tmnxCiscoHDLCUpCounttmnxCiscoHDLCUpCount specifies the number of continual
keepalive packets that has to be received to declare the link up.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.2 |
tmnxCiscoHDLCDownCounttmnxCiscoHDLCDownCount specifies the number of
'tmnxCiscoHDLCKeepAliveInt' intervals that must
pass without receiving a keepalive packet before the
link is declared down.
It is expected that the nodes at the two endpoints of
the Cisco HDLC link are provisioned with the same values.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.3 |
tmnxCiscoHDLCOperStateThe value of tmnxCiscoHDLCOperState indicates the operational
status of the Cisco HDLC protocol for this port.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.20.1.4 |
tmnxBundleImaGrpTableThe tmnxBundleImaGrpTable contains IMA Group data SEQUENCE OF TmnxBundleImaGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.21 |
tmnxBundleImaGrpEntryEach row entry contains data on an IMA Group. TmnxBundleImaGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.21.1 |
tmnxBundleImaGrpLnkActTimertmnxBundleImaGrpLnkActTimer specifies the Link Activation Timer
used to clear an existing LIF, LODS and FRI-IMA alarm. The time
specified determines how long is needed for member links to
stabilize before being activated.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.1 |
tmnxBundleImaGrpLnkDeactTimertmnxBundleImaGrpLnkDeactTimer specifies the Link Deactivation Timer
used to raise an LIF, LODS and FRI-IMA alarm. The time
specified determines how long before a member link is declared in
error and is deactivated.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.2 |
tmnxBundleImaGrpSymmetryModetmnxBundleImaGrpSymmetryMode specifies the type of cell rate
transfer over the virtual link.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.3 |
tmnxBundleImaGrpTxIdtmnxBundleImaGrpTxId specifies the IMA Id generated at group
creation time used by the near-end.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.4 |
tmnxBundleImaGrpRxIdtmnxBundleImaGrpRxId specifies the IMA ID generated at group
creation time used by the far-end.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.5 |
tmnxBundleImaGrpTxRefLnktmnxBundleImaGrpTxRefLnk specifies the IMA bundle member
that was selected to be the transmit timing reference link.
If no member has been selected as the reference link a value
of zero is returned.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.6 |
tmnxBundleImaGrpRxRefLnktmnxBundleImaGrpRxRefLnk specifies the IMA bundle member
that was detected to be the receive timing reference link.
If no member has been detected as the reference link a value
of zero is returned.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.7 |
tmnxBundleImaGrpSmNeStatetmnxBundleImaGrpSmNeState specifies the current state
of the IMA Group for the near-end.ro TmnxImaGrpState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.8 |
tmnxBundleImaGrpSmFeStatetmnxBundleImaGrpSmFeState specifies the current state
of the IMA Group for the far-end.ro TmnxImaGrpState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.9 |
tmnxBundleImaGrpSmFailStatetmnxBundleImaGrpSmFailState specifies the current state
of the IMA Group.ro TmnxImaGrpFailState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.10 |
tmnxBundleImaGrpSmDownSecstmnxBundleImaGrpSmDownSecs specifies the number of seconds
that the IMA Group State Machine is not Operational.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.11 |
tmnxBundleImaGrpSmOperSecstmnxBundleImaGrpSmOperSecs specifies the number of seconds
that the IMA Group State Machine has been in the Operational
State.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.12 |
tmnxBundleImaGrpAvailTxCRtmnxBundleImaGrpAvailTxCR specifies the available transmit
bandwidth on this IMA group. It only considers members that
are in the Active State.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.13 |
tmnxBundleImaGrpAvailRxCRtmnxBundleImaGrpAvailRxCR specifies the available bandwidth
on this IMA group in the receive direction. It only considers
members that are in the Active State.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.14 |
tmnxBundleImaGrpNeFailstmnxBundleImaGrpNeFails specifies the number of reported
IMA Group failures since boot time.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.15 |
tmnxBundleImaGrpFeFailstmnxBundleImaGrpFeFails specifies the number of reported
IMA Group far-end failures since boot time.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.16 |
tmnxBundleImaGrpTxIcpCellstmnxBundleImaGrpTxIcpCells specifies number of transmitted
ICP cells for this IMA Group.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.17 |
tmnxBundleImaGrpRxIcpCellstmnxBundleImaGrpRxIcpCells specifies number of received
ICP cells for this IMA Group.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.18 |
tmnxBundleImaGrpErrorIcpCellstmnxBundleImaGrpErrorIcpCells specifies number of
ICP cells with HEC or CRC-10 errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.19 |
tmnxBundleImaGrpLostRxIcpCellstmnxBundleImaGrpLostRxIcpCells specifies the number of
missing ICP cells at the expected offset.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.20 |
tmnxBundleImaGrpTxOamLablValtmnxBundleImaGrpTxOamLablVal specifies near-end value
to be transmitted.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.21 |
tmnxBundleImaGrpRxOamLablValtmnxBundleImaGrpRxOamLablVal specifies far-end value
received.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.22 |
tmnxBundleImaGrpAlphaValuetmnxBundleImaGrpAlphaValue specifies the number of
consecutive ICP cells that need to be detected
before moving from the IMA Sync State to the IMA Hunt
State.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.23 |
tmnxBundleImaGrpBetaValuetmnxBundleImaGrpBetaValue specifies the number of
consecutive errored ICP cells that need to be detected
before moving from the IMA Sync State to the IMA Hunt
Staterw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.24 |
tmnxBundleImaGrpGammaValuetmnxBundleImaGrpGammaValue specifies the number of
consecutive valid ICP cells that need to be detected
before moving from the IMA pre-Sync State to the
IMA Hunt State.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.25 |
tmnxBundleImaGrpNeClockModetmnxBundleImaGrpNeClockMode specifies near-end transmit
clock mode.rw TmnxImaGrpClockModes .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.26 |
tmnxBundleImaGrpFeClockModetmnxBundleImaGrpFeClockMode specifies far-end transmit
clock mode.rw TmnxImaGrpClockModes .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.27 |
tmnxBundleImaGrpVersiontmnxBundleImaGrpVersion specifies the IMA Version for
this group.rw TmnxImaGrpVersion .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.28 |
tmnxBundleImaGrpMaxConfBwtmnxBundleImaGrpMaxConfBw specifies the number of links
that is used to determine the maximum configurable
bandwidth that is allowed to be used for this IMA group.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.29 |
tmnxBundleImaGrpTestStatetmnxBundleImaGrpTestState specifies the current state of
the test pattern procedure. A value of 'disabled' specifies
that the group is currently not running. A value of
'operating' enables the test pattern procedure. The test
pattern procedure continues until it is 'disabled'.rw TmnxImaTestState .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.30 |
tmnxBundleImaGrpTestMembertmnxBundleImaGrpTestMember specifies a member link to
be used for the test pattern procedure. A value of zero
indicates that no member link has been selected.
When tmnxBundleImaGrpTestState does not have the value
'disabled', an attempt to set this object will be
rejected with an inconsistentValue error.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.31 |
tmnxBundleImaGrpTestPatterntmnxBundleImaGrpTestPattern specifies the Transmit Test
Pattern in an IMA group loopback operation. This value
may only be changed when tmnxBundleImaGrpTestState is
'disabled'.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.32 |
tmnxBundleImaGrpDiffDelayMaxObstmnxBundleImaGrpDiffDelayMaxObs indicates the latest
maximum differential delay observed between links
having the least and most link propagation delay
among the received links configured in this IMA group.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.33 |
tmnxBundleImaGrpLeastDelayLinktmnxBundleImaGrpLeastDelayLink indicates a member link
which has the smallest link propagation delay. If this
delay has yet to be determined or no member link has
been configured, a value of zero is returned.ro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.21.1.34 |
tmnxBundleMemberImaTableThe tmnxBundleMemberImaTable has an entry for an
IMA link associated with an IMA Group. SEQUENCE OF TmnxBundleMemberImaEntry .1.3.6.1.4.1.6527.3.1.2.2.4.22 |
tmnxBundleMemberImaEntryEach row entry represents an IMA link associated with
an IMA Group. TmnxBundleMemberImaEntry .1.3.6.1.4.1.6527.3.1.2.2.4.22.1 |
tmnxBundleMemberImaNeTxStatetmnxBundleMemberImaNeTxState indicates the state of near-end
transmit IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.1 |
tmnxBundleMemberImaNeRxStatetmnxBundleMemberImaNeRxState indicates the state of near-end
receive IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.2 |
tmnxBundleMemberImaFeTxStatetmnxBundleMemberImaFeTxState indicates the state of far-end
transmit IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.3 |
tmnxBundleMemberImaFeRxStatetmnxBundleMemberImaFeRxState indicates the state of far-end
receive IMA link.ro TmnxImaLnkState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.4 |
tmnxBundleMemberImaNeRxFailStatetmnxBundleMemberImaNeRxFailState indicates the IMA link failure
reason for the near-end.ro TmnxImaLnkFailState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.5 |
tmnxBundleMemberImaFeRxFailStatetmnxBundleMemberImaFeRxFailState indicates the IMA link failure
reason for the far-end.ro TmnxImaLnkFailState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.6 |
tmnxBundleMemberImaTxLidtmnxBundleMemberImaTxLid indicates the Link Identifier
assigned to the transmit IMA link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.7 |
tmnxBundleMemberImaRxLidtmnxBundleMemberImaRxLid indicates the Link Identifier
used on the receive IMA link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.8 |
tmnxBundleMemberImaViolationstmnxBundleMemberImaViolations indicates the number of
ICP violations including errored, invalid or missing ICP
cells.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.9 |
tmnxBundleMemberImaNeSevErrSecstmnxBundleMemberImaNeSevErrSecs indicates the number
of one second intervals in which thirty percent or
more of the near-end ICP cells are in violation, or
link defects have occurred.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.10 |
tmnxBundleMemberImaFeSevErrSecstmnxBundleMemberImaFeSevErrSecs indicates the number
of one second intervals in which the far-end contains
IMA-RDI defects.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.11 |
tmnxBundleMemberImaNeUnavailSecstmnxBundleMemberImaNeUnavailSecs indicates the number
of unavailable seconds at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.12 |
tmnxBundleMemberImaFeUnavailSecstmnxBundleMemberImaFeUnavailSecs indicates the number
of unavailable seconds at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.13 |
tmnxBundleMemberImaNeTxUnuseSecstmnxBundleMemberImaNeTxUnuseSecs indicates the number
of unavailable seconds at the near-end transmit link
state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.14 |
tmnxBundleMemberImaNeRxUnuseSecstmnxBundleMemberImaNeRxUnuseSecs indicates the number
of unavailable seconds at the near-end receive link
state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.15 |
tmnxBundleMemberImaFeTxUnuseSecstmnxBundleMemberImaFeTxUnuseSecs indicates the number
of unavailable seconds at the far-end transmit link
state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.16 |
tmnxBundleMemberImaFeRxUnuseSecstmnxBundleMemberImaFeRxUnuseSecs indicates the number
of unavailable seconds at the far-end receive link
state machine.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.17 |
tmnxBundleMemberImaNeTxNumFailstmnxBundleMemberImaNeTxNumFails indicates the number
of times that a near-end transmit alarm is set on the
IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.18 |
tmnxBundleMemberImaNeRxNumFailstmnxBundleMemberImaNeRxNumFails indicates the number
of times that a near-end receive alarm is set on the
IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.19 |
tmnxBundleMemberImaFeTxNumFailstmnxBundleMemberImaFeTxNumFails indicates the number
of times that a far-end transmit alarm is set on the
IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.20 |
tmnxBundleMemberImaFeRxNumFailstmnxBundleMemberImaFeRxNumFails indicates the number
of times that a far-end receive alarm is set on the
IMA link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.21 |
tmnxBundleMemberImaTxIcpCellstmnxBundleMemberImaTxIcpCells indicates the number
of ICP cells that have been transmitted on the IMA
link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.22 |
tmnxBundleMemberImaRxIcpCellstmnxBundleMemberImaRxIcpCells indicates the number
of ICP cells that have been received on the IMA
link.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.23 |
tmnxBundleMemberImaErrorIcpCellstmnxBundleMemberImaErrorIcpCells indicates the number
of ICP cells with HEC or CRC-10 errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.24 |
tmnxBundleMemberImaLstRxIcpCellstmnxBundleMemberImaLstRxIcpCells indicates the number
of lost ICP cells at the expected offset.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.25 |
tmnxBundleMemberImaOifAnomaliestmnxBundleMemberImaOifAnomalies indicates the number
of OIF anomalies at the near-end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.26 |
tmnxBundleMemberImaRxTestStatetmnxBundleMemberImaRxTestState indicates the current
state of the test pattern on this link.ro TmnxImaTestState .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.27 |
tmnxBundleMemberImaRxTestPatterntmnxBundleMemberImaRxTestPattern indicates the received
test pattern value on this link.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.28 |
tmnxBundleMemberImaRelDelaytmnxBundleMemberImaRelDelay indicates the latest measured
delay on this member link relative to the member link with
the least delay within the same IMA groupro Unsigned32 UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.2.4.22.1.29 |
tmnxDS1PortTableThe tmnxDS1PortTable has an entry for a DS1 physical port. SEQUENCE OF TmnxDS1PortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.23 |
tmnxDS1PortEntryEach row entry represents a physical DS1 port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. Entries in this table will
be created automatically when the tmnxMDAAssignedType object is
set to the DS1 MDA type The tmnxDS1PortEntry contains attributes
that are unique to the 'ds1e1' TmnxPortType. The tmnxPortPortID
contains the slot, mda and port numbers encoded into it.
For each tmnxDS1PortEntry, there will be a corresponding entry
in the tmnxPortTable and the ifTable. TmnxDS1PortEntry .1.3.6.1.4.1.6527.3.1.2.2.4.23.1 |
tmnxDS1PortBuildouttmnxDS1PortBuildout configures the cable buildout length. A ds1 port
has two settings for the DS1 cable buildout: a 'short' setting, for
cable lengths of less than or equal to 655 feet, and a 'long' setting
for cable lengths of greater than 655 feet.
This object applies to copper-cable-based DS1 ports only.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.1 |
tmnxDS1PortLastChangeTimeThe tmnxDS1PortLastChangeTime variable contains the sysUpTime
value of the most recently modified writable variable in the
tmnxDS1PortEntry row for this port.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.2 |
tmnxDS1PortTypetmnxDS1PortType configures the type of the physical port to 'ds1',
'e1' or 'j1'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.3 |
tmnxDS1PortLineLengthtmnxDS1PortLineLength configuration only applies to a ds1 port
configured with a 'short' buildout. tmnxDS1PortLineLength configures
the length of the line (in feet). For line lengths longer than 655
feet configure the ds1 port buildout as 'long'.
For 'long' buildout the following values are valid:
lengthNotApplicable - Not applicable
For 'short' buildout the following values are valid:
length0To133 - For line length from 0 to 133 feet
length134To266 - For line length from 134 to 266 feet
length267To399 - For line length from 267 to 399 feet
length400To533 - For line length from 400 to 533 feet
length534To655 - For line length from 534 to 655 feet
The default for 'long' buildout is 'lengthNotApplicable' while the
default for 'short' buildout is 'length0To133'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.4 |
tmnxDS1PortLbotmnxDS1PortLbo configuration only applies to a ds1 port
configured with a 'long' buildout. tmnxDS1PortLbo configures the
number of decibels(dB) the transmission signal decreases over the line.
For 'short' buildout the following values are valid:
lboNotApplicable - Not applicable
For 'long' buildout the following values are valid:
lbo0dB - For 0 dB
lboNeg7p5dB - For -7.5 dB
lboNeg15p0dB - For -15.0 dB
lboNeg22p5dB - For -22.5 dB
The default for 'short' build out is 'lboNotApplicable' while the
default for 'long' buildout is 'lbo0dB'rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.5 |
tmnxDS1PortDbGaintmnxDS1PortDbGain only applies to a ds1 port configured with a
'long' buildout. tmnxDS1PortDbGain shows the number of decibels
the received signal is increased to compensate for loss.ro Integer32 UNITS "db" .1.3.6.1.4.1.6527.3.1.2.2.4.23.1.6 |
tmnxPortSchedOverrideTableThe tmnxPortSchedOverrideTable has an entry for each port
scheduler override configured on this system. SEQUENCE OF TmnxPortSchedOverrideEntry .1.3.6.1.4.1.6527.3.1.2.2.4.24 |
tmnxPortSchedOverrideEntryEach row represents a particular port-scheduler override. Entries
are created and deleted by the user. TmnxPortSchedOverrideEntry .1.3.6.1.4.1.6527.3.1.2.2.4.24.1 |
tmnxPortSchedOverrideRowStatusThe value of tmnxPortSchedOverrideRowStatus is used for the
creation and deletion of port-scheduler overrides. When
tmnxPortEgrPortSchedPlcy of the tmnxPortEntry indexed by the
same indices of this table is an empty string, creation
will fail.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.1 |
tmnxPortSchedOverrideSchedNameThe value of tmnxPortSchedOverrideSchedName indicates the name
of the port scheduler policy that this row entry overrides.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.2 |
tmnxPortSchedOverrideLastChangedThe value of tmnxPortSchedOverrideLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.3 |
tmnxPortSchedOverrideMaxRateThe value of tmnxPortSchedOverrideMaxRate specifies the explicit
maximum frame based bandwidth limit. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyMaxRate.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.4 |
tmnxPortSchedOverrideLvl1PIRThe value of tmnxPortSchedOverrideLvl1PIR specifies the total
bandwidth limit, PIR, for priority level 1. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.5 |
tmnxPortSchedOverrideLvl1CIRThe value of tmnxPortSchedOverrideLvl1CIR specifies the within-cir
bandwidth limit for priority level 1. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl1CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.6 |
tmnxPortSchedOverrideLvl2PIRThe value of tmnxPortSchedOverrideLvl2PIR specifies the total
bandwidth limit, PIR, for priority level 2. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.7 |
tmnxPortSchedOverrideLvl2CIRThe value of tmnxPortSchedOverrideLvl2CIR specifies the within-cir
bandwidth limit for priority level 2. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl2CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.8 |
tmnxPortSchedOverrideLvl3PIRThe value of tmnxPortSchedOverrideLvl3PIR specifies the total
bandwidth limit, PIR, for priority level 3. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.9 |
tmnxPortSchedOverrideLvl3CIRThe value of tmnxPortSchedOverrideLvl3CIR specifies the within-cir
bandwidth limit for priority level 3. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl3CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.10 |
tmnxPortSchedOverrideLvl4PIRThe value of tmnxPortSchedOverrideLvl4PIR specifies the total
bandwidth limit, PIR, for priority level 4. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.11 |
tmnxPortSchedOverrideLvl4CIRThe value of tmnxPortSchedOverrideLvl4CIR specifies the within-cir
bandwidth limit for priority level 4. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl4CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.12 |
tmnxPortSchedOverrideLvl5PIRThe value of tmnxPortSchedOverrideLvl5PIR specifies the total
bandwidth limit, PIR, for priority level 5. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.13 |
tmnxPortSchedOverrideLvl5CIRThe value of tmnxPortSchedOverrideLvl5CIR specifies the within-cir
bandwidth limit for priority level 5. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl5CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.14 |
tmnxPortSchedOverrideLvl6PIRThe value of tmnxPortSchedOverrideLvl6PIR specifies the total
bandwidth limit, PIR, for priority level 6. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.15 |
tmnxPortSchedOverrideLvl6CIRThe value of tmnxPortSchedOverrideLvl6CIR specifies the within-cir
bandwidth limit for priority level 6. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl6CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.16 |
tmnxPortSchedOverrideLvl7PIRThe value of tmnxPortSchedOverrideLvl7PIR specifies the total
bandwidth limit, PIR, for priority level 7. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.17 |
tmnxPortSchedOverrideLvl7CIRThe value of tmnxPortSchedOverrideLvl7CIR specifies the within-cir
bandwidth limit for priority level 7. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl7CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.18 |
tmnxPortSchedOverrideLvl8PIRThe value of tmnxPortSchedOverrideLvl8PIR specifies the total
bandwidth limit, PIR, for priority level 8. This object
overrides TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8PIR.rw TPortSchedulerPIRRate UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.19 |
tmnxPortSchedOverrideLvl8CIRThe value of tmnxPortSchedOverrideLvl8CIR specifies the within-cir
bandwidth limit for priority level 8. This object overrides
TIMETRA-QOS-MIB::tPortSchedulerPlcyLvl8CIR.rw TPortSchedulerCIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.20 |
tmnxPortSchedOverrideFlagsThe value of tmnxPortSchedOverrideFlags specifies the set of
attributes whose values have been overridden via management
on this port scheduler. Clearing a given flag will return the
corresponding overridden attribute to the value defined in
the port's port-scheduler policy.rw Bits .1.3.6.1.4.1.6527.3.1.2.2.4.24.1.21 |
tmnxBPGrpAssocTableThe tmnxBPGrpAssocTable has an entry for each Bundle Protection Group
created on the system. SEQUENCE OF TmnxBPGrpAssocEntry .1.3.6.1.4.1.6527.3.1.2.2.4.25 |
tmnxBPGrpAssocEntryEach row displays the relationship between a Bundle Protection
group and its working and protection bundle. TmnxBPGrpAssocEntry .1.3.6.1.4.1.6527.3.1.2.2.4.25.1 |
tmnxBPGrpAssocWorkingBundleIDtmnxBPGrpAssocWorkingBundleID identifies the working bundle. A value
of zero is given if no working bundle is associated with the given
tmnxBundleBundleID.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.1 |
tmnxBPGrpAssocProtectBundleIDtmnxBPGrpAssocProtectBundleID identifies the protection bundle. A value
of zero is given if no protection bundle is associated with the given
tmnxBundleBundleID.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.2 |
tmnxBPGrpAssocActiveBundleIDtmnxBPGrpAssocActiveBundleID identifies the bundle that is considered
the active bundle. This bundle contains the members that are part of
the active aps port. A value of zero is given if no bundle is
considered active.ro TmnxBundleID .1.3.6.1.4.1.6527.3.1.2.2.4.25.1.3 |
tmnxBundleMlpppTableThe tmnxBundleMlpppTable contains MLPPP specific data. SEQUENCE OF TmnxBundleMlpppEntry .1.3.6.1.4.1.6527.3.1.2.2.4.26 |
tmnxBundleMlpppEntryEach row entry contains data on an MLPPP Bundle. TmnxBundleMlpppEntry .1.3.6.1.4.1.6527.3.1.2.2.4.26.1 |
tmnxBundleMlpppEndpointIDtmnxBundleMlpppEndpointID indentifies the Endpoint Discriminator
identifier value within the specified tmnxBundleMlpppEndpointIDClass.
The object tmnxPortAdminStatus must be set to 'outOfService' to
change this value.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.1 |
tmnxBundleMlpppEndpointIDClasstmnxBundleMlpppEndpointIDClass specifies the Link Control
Protocol Endpoint Descriminator Class field type of the
tmnxBundleMlpppEndpointID. The object tmnxPortAdminStatus
must be set to 'outOfService' to change this value.
Bundle DEFVAL
Physical MLPPP Bundle ieee802dot1GlobalMacAddress (3)
MLPPP Bundle Protection Group ipAddress (2)rw TmnxMlpppEndpointIdClass .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.2 |
tmnxBundleMlpppClassCountThe value of tmnxBundleMlpppClassCount specifies
whether Multiclass MLPPP is enabled on
a bundle with a tmnxBundleType of 'mlppp' and when enabled what is the
number of classes to be negotiated/supported over the MLPPP bundle.
The value of 0 disables multiclass MLPPP including negotiation in
the PPP protocol.
All other values specify the number of classes to be supported
on a given multiclass bundle and enable Multiclass MLPPP negotiation
on that bundle.
Non-zero values supported are platform/MDA specific.
The value of tmnxBundleMlpppClassCount must be set to 0 and cannot be
changed when LFI is enabled on the bundle (see tmnxBundleLFI object
in tmnxBundleTable).
The value of tmnxBundleMlpppClassCount may be modified only when
tmnxBundleNumLinks is zero.
To set the value of tmnxBundleMlpppClassCount to a value greater
than 4, the long sequence format must be enabled on the bundle (see
tmnxBundleShortSequence object in tmnxBundleTable).
Changing the value of tmnxBundleMlpppClassCount resets the values of
tmnxBundleMlpppIngQoSProfId and tmnxBundleMlpppEgrQoSProfId to their
defaultsrw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.3 |
tmnxBundleMlpppIngQoSProfIdtmnxBundleMlpppIngQoSProfId specifies ingress QoS profile
to be used for the incoming traffic over this MLPPP
bundle.
The value of tmnxBundleMlpppIngQoSProfId may be modified only
when the value of tmnxBundleNumLinks is 0.
The value of tmnxBundleMlpppIngQoSProfId of 0 indicates
a default QoS profile is used as applicable to a given hardware
and the configured value of tmnxBundleMlpppClassCount.rw TMlpppQoSProfileId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.4 |
tmnxBundleMlpppEgrQoSProfIdtmnxBundleMlpppEgrQoSProfId specifies egress QoS profile
to be used for the outgoing traffic over this MLPPP
bundle.
The value of tmnxBundleMlpppEgrQoSProfId may be modified only
when tmnxBundleNumLinks is zero.
The value of tmnxBundleMlpppEgrQoSProfId of 0 indicates
a default profile is used as applicable to a given hardware
and the configured value of tmnxBundleMlpppClassCount.rw TMlpppQoSProfileId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.5 |
tmnxBundleMlpppMagicNumbertmnxBundleMlpppMagicNumber specifies whether or not the bundle will
detect a loopback scenario on member links and take a looped back
member links out of service.
A value of 'enabled (1)' will detect loopbacks.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.6 |
tmnxBundleMlpppStatelessApsSwotmnxBundleMlpppStatelessApsSwo specifies whether the bundle will
perform a statefull or a stateless APS switchover.
The value of tmnxBundleMlpppStatelessApsSwo must be set to 'disabled (2)' and
cannot be changed for normal mlppp bundles.
The value of tmnxBundleMlpppStatelessApsSwo may be changed
for APS bundle protection groups.
A stateless switchover implies that PPP is renegotiated on each member
link after the switchover. PPP negotiations may take a few seconds
to complete.
A statefull switchover implies that after an APS switchover the PPP
state of the bundle will be restored based on the bpgrp bundle state
before the switchover.
A value of 'enabled (1)' will configure stateless APS switchovers.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.26.1.7 |
tmnxHsmdaPortSchOvrTblLastChngdThe value of tmnxHsmdaPortSchOvrTblLastChngd indicates the sysUpTime
at the time of the last modification of tmnxHsmdaPortSchOvrTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.27 |
tmnxHsmdaPortSchOvrTableThe tmnxHsmdaPortSchOvrTable has an entry for each port-level HSMDA
scheduler override configured on this system. SEQUENCE OF TmnxHsmdaPortSchedOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.28 |
tmnxHsmdaPortSchOvrEntryEach row represents a particular port-level HSMDA scheduler override.
Entries are created and deleted by the user. TmnxHsmdaPortSchedOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.28.1 |
tmnxHsmdaPortSchOvrRowStatusThe value of tmnxHsmdaPortSchOvrRowStatus is used for the
creation and deletion of port-level HSMDA scheduler overrides.
When the tmnxMDAAssignedType of the tmnxPortEntry indexed
by the same indices of this table is a non-HSMDA MDA Type,
creation will fail and return a 'noCreation' error.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.1 |
tmnxHsmdaPortSchOvrLastChangedThe value of tmnxHsmdaPortSchOvrLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.2 |
tmnxHsmdaPortSchOvrMaxRateThe value of tmnxHsmdaPortSchOvrMaxRate specifies the explicit
maximum frame based bandwidth limit for this HSMDA port
scheduler.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyMaxRate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.3 |
tmnxHsmdaPortSchOvrGrp1RateThe value of tmnxHsmdaPortSchOvrGrp1Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
group 1 for this HSMDA port scheduler.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyGrp1Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.4 |
tmnxHsmdaPortSchOvrGrp2RateThe value of tmnxHsmdaPortSchOvrGrp2Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
group 2 for this HSMDA port scheduler.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyGrp2Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.5 |
tmnxHsmdaPortSchOvrClass1RateThe value of tmnxHsmdaPortSchOvrClass1Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl1Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.6 |
tmnxHsmdaPortSchOvrClass1WtInGpThe value of tmnxHsmdaPortSchOvrClass1WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass1WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl1WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.7 |
tmnxHsmdaPortSchOvrClass2RateThe value of tmnxHsmdaPortSchOvrClass2Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl2Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.8 |
tmnxHsmdaPortSchOvrClass2WtInGpThe value of tmnxHsmdaPortSchOvrClass2WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass2WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl2WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.9 |
tmnxHsmdaPortSchOvrClass3RateThe value of tmnxHsmdaPortSchOvrClass3Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl3Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.10 |
tmnxHsmdaPortSchOvrClass3WtInGpThe value of tmnxHsmdaPortSchOvrClass3WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass3WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl3WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.11 |
tmnxHsmdaPortSchOvrClass4RateThe value of tmnxHsmdaPortSchOvrClass4Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl4Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.12 |
tmnxHsmdaPortSchOvrClass4WtInGpThe value of tmnxHsmdaPortSchOvrClass4WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass4WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl4WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.13 |
tmnxHsmdaPortSchOvrClass5RateThe value of tmnxHsmdaPortSchOvrClass5Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl5Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.14 |
tmnxHsmdaPortSchOvrClass5WtInGpThe value of tmnxHsmdaPortSchOvrClass5WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass5WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl5WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.15 |
tmnxHsmdaPortSchOvrClass6RateThe value of tmnxHsmdaPortSchOvrClass6Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl6Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.16 |
tmnxHsmdaPortSchOvrClass6WtInGpThe value of tmnxHsmdaPortSchOvrClass6WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass6WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl6WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.17 |
tmnxHsmdaPortSchOvrClass7RateThe value of tmnxHsmdaPortSchOvrClass7Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl7Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.18 |
tmnxHsmdaPortSchOvrClass7WtInGpThe value of tmnxHsmdaPortSchOvrClass7WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass7WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl7WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.19 |
tmnxHsmdaPortSchOvrClass8RateThe value of tmnxHsmdaPortSchOvrClass8Rate specifies the explicit
maximum frame based bandwidth limit, in megabits per second, for
this HSMDA port scheduler policy level.
A value of -2 indicates no override.
This object overrides TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl8Rate.rw THsmdaPIRMRateOverride UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.20 |
tmnxHsmdaPortSchOvrClass8WtInGpThe value of tmnxHsmdaPortSchOvrClass8WtInGp specifies the weight
the HSMDA port scheduler policy should apply to this policy level
within the group it belongs to.
The value of tmnxHsmdaPortSchOvrClass8WtInGp will only be
used if this policy level has been assigned to a group
by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value.
A value of -2 indicates no override.
This object overrides
TIMETRA-QOS-MIB::tHsmdaSchedulerPlcyLvl8WgtInGrp.rw THsmdaWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.28.1.21 |
tmnxPortEgrShaperTblLastChangedThe value of tmnxPortEgrShaperTblLastChanged indicates the sysUpTime
at the time of the last modification of tmnxPortEgrShaperTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.
This object is obsoleted in 10.0 Release.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.29 |
tmnxPortEgrShaperTableThe tmnxPortEgrShaperTable has an entry for each port-level egress
secondary shaper configured on this system.
This table is obsoleted in 10.0 Release.obsolete SEQUENCE OF TmnxPortEgrShaperEntry .1.3.6.1.4.1.6527.3.1.2.2.4.30 |
tmnxPortEgrShaperEntryEach row represents a particular port-level egress secondary shaper.
Entries are created and deleted by the user.obsolete TmnxPortEgrShaperEntry .1.3.6.1.4.1.6527.3.1.2.2.4.30.1 |
tmnxPortEgrShaperNameThe port egress shaper named is used an index to the table entry.obsolete TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.30.1.1 |
tmnxPortEgrShaperRowStatusThe value of tmnxPortEgrShaperRowStatus is used for the creation
and deletion of entries in the tmnxPortEgrShaperTable.rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.30.1.2 |
tmnxPortEgrShaperLastChangedThe value of tmnxPortEgrShaperLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.30.1.3 |
tmnxPortEgrShaperRateThe value of tmnxPortEgrShaperRate specifies the explicit maximum
frame based bandwidth limit, in megabits per second, of this
egress port secondary shaper policy.rwobsolete TSecondaryShaper10GPIRRate UNITS "Mbps" .1.3.6.1.4.1.6527.3.1.2.2.4.30.1.4 |
tmnxDigitalDiagMonitorTableThe tmnxDigitalDiagMonitorTable has an entry for each SFF in the
system that supports Digital Diagnostic Monitoring (DDM). The table is
indexed by TmnxPortID. Each row in this table is dynamically added
and removed internally by the system based on the presence or absence
of DDM capable SFF components. SEQUENCE OF TmnxDigitalDiagMonitorEntry .1.3.6.1.4.1.6527.3.1.2.2.4.31 |
tmnxDigitalDiagMonitorEntryEach row represents a particular SFF that supports Digital
Diagnostic Monitoring.
Entries are created and deleted internally by the system. TmnxDigitalDiagMonitorEntry .1.3.6.1.4.1.6527.3.1.2.2.4.31.1 |
tmnxDDMTemperatureThe value of tmnxDDMTemperature indicates the current temperature
of the SFF in 1/256th degrees Celsius.
If the SFF is externally calibrated, the objects
tmnxDDMExtCalTemperatureSlope and tmnxDDMExtCalTemperatureOffset affect
the temperature calculation.
The formula for translating between the value of tmnxDDMTemperature and
degrees Celsius is:
Internally Calibrated only:
tmnxDDMTemperature / 256
Externally Calibrated:
(tmnxDDMTemperature * (tmnxDDMExtCalTemperatureSlope / 256)
+ tmnxDDMExtCalTemperatureOffset) / 256
For example (internally calibrated SFP):
The SNMP value 5734 is 22.4 degrees Celsius.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.1 |
tmnxDDMTempLowWarningThe value of tmnxDDMTempLowWarning indicates the temperature
of the SFF in degrees Celsius that triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.2 |
tmnxDDMTempLowAlarmThe value of tmnxDDMTempLowAlarm indicates the temperature
of the SFF in degrees Celsius that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.3 |
tmnxDDMTempHiWarningThe value of tmnxDDMTempHiWarning indicates the temperature
of the SFF in degrees Celsius that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.4 |
tmnxDDMTempHiAlarmThe value of tmnxDDMTempHiAlarm indicates the temperature
of the SFF in degrees Celsius that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.5 |
tmnxDDMSupplyVoltageThe value of tmnxDDMSupplyVoltage indicates the current supply
voltage of the SFF in 1/10000 of a Volt(V).
If the SFF is externally calibrated, the objects
tmnxDDMExtCalVoltageSlope and tmnxDDMExtCalVoltageOffset affect
the voltage calculation.
The formula for translating between the value of tmnxDDMSupplyVoltage
and Voltage is:
Internally Calibrated only:
tmnxDDMSupplyVoltage / 10000
Externally Calibrated:
(tmnxDDMSupplyVoltage * (tmnxDDMExtCalVoltageSlope / 256)
+ tmnxDDMExtCalVoltageOffset) / 10000
For example (internally calibrated SFP):
The SNMP value 32851 is 3.2851 Volts (V).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.6 |
tmnxDDMSupplyVoltageLowWarningThe value of tmnxDDMSupplyVoltageLowWarning indicates the supply
voltage of the SFF in micro-Volts (uV) that triggers a
low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.7 |
tmnxDDMSupplyVoltageLowAlarmThe value of tmnxDDMSupplyVoltageLowAlarm indicates the supply
voltage of the SFF in micro-Volts (uV) that triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.8 |
tmnxDDMSupplyVoltageHiWarningThe value of tmnxDDMSupplyVoltageHiWarning indicates the supply
voltage of the SFF in micro-Volts (uV) that triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.9 |
tmnxDDMSupplyVoltageHiAlarmThe value of tmnxDDMSupplyVoltageHiAlarm indicates the supply
voltage of the SFF in micro-Volts (uV) that triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.10 |
tmnxDDMTxBiasCurrentThe value of tmnxDDMTxBiasCurrent indicates the current Transmit
Bias Current of the SFF in 1/500 milliamperes (mA).
If the SFF is externally calibrated, the objects
tmnxDDMExtCalTxLaserBiasSlope and tmnxDDMExtCalTxLaserBiasOffset affect
the ampere calculation.
The formula for translating between the value of tmnxDDMTxBiasCurrent
and amperes is:
Internally Calibrated only:
tmnxDDMTxBiasCurrent / 500
Externally Calibrated:
(tmnxDDMTxBiasCurrent * (tmnxDDMExtCalTxLaserBiasSlope / 256)
+ tmnxDDMExtCalTxLaserBiasOffset) / 500
For example (internally calibrated SFP):
The SNMP value 2565 is 5.1 milliamperes (mA).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.11 |
tmnxDDMTxBiasCurrentLowWarningThe value of tmnxDDMTxBiasCurrentLowWarning indicates the Transmit
Bias Current of the SFF in micro-Amperes (uA) that triggers a
low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.12 |
tmnxDDMTxBiasCurrentLowAlarmThe value of tmnxDDMTxBiasCurrentLowAlarm indicates the Transmit
Bias Current of the SFF in micro-Amperes (uA) that triggers a
low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.13 |
tmnxDDMTxBiasCurrentHiWarningThe value of tmnxDDMTxBiasCurrentHiWarning indicates the Transmit
Bias Current of the SFF in micro-Amperes (uA) that triggers a
hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.14 |
tmnxDDMTxBiasCurrentHiAlarmThe value of tmnxDDMTxBiasCurrentHiAlarm indicates the Transmit
Bias Current of the SFF in micro-Amperes (uA) that triggers a
hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.15 |
tmnxDDMTxOutputPowerThe value of tmnxDDMTxOutputPower indicates the current Output
Power of the SFF in one tenths of a micro-Watt (uW).
For example:
Using the SNMP value of 790, and using units of tenths of microwatt,
790 becomes 79 microwatts or 0.079 milliwatts. Converting to dBm:
10 x log10(0.079) = -11.0 dBmro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.16 |
tmnxDDMTxOutputPowerLowWarningThe value of tmnxDDMTxOutputPowerLowWarning indicates the Output Power
of the SFF in one tenths of a micro-Watt (uW) that triggers a
low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.17 |
tmnxDDMTxOutputPowerLowAlarmThe value of tmnxDDMTxOutputPowerLowAlarm indicates the Output Power
of the SFF in one tenths of a micro-Watt (uW) that triggers a
low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.18 |
tmnxDDMTxOutputPowerHiWarningThe value of tmnxDDMTxOutputPowerHiWarning indicates the Output Power
of the SFF in one tenths of a micro-Watt (uW) that triggers a
hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.19 |
tmnxDDMTxOutputPowerHiAlarmThe value of tmnxDDMTxOutputPowerHiAlarm indicates the Output Power
of the SFF in one tenths of a micro-Watt (uW) that triggers a
hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.20 |
tmnxDDMRxOpticalPowerThe value of tmnxDDMRxOpticalPower indicates the current Received
Optical Power of the SFF in one tenths of a micro-Watt (uW).
For example:
Using the SNMP value of 790, and using units of tenths of microwatt,
790 becomes 79 microwatts or 0.079 milliwatts. Converting to dBm:
10 x log10(0.079) = -11.0 dBmro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.21 |
tmnxDDMRxOpticalPowerLowWarningThe value of tmnxDDMRxOpticalPowerLowWarning indicates the Received
Optical Power of the SFF in one tenths of a micro-Watt (uW) that
triggers a low-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.22 |
tmnxDDMRxOpticalPowerLowAlarmThe value of tmnxDDMRxOpticalPowerLowAlarm indicates the Received
Optical Power of the SFF in one tenths of a micro-Watt (uW) that
triggers a low-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.23 |
tmnxDDMRxOpticalPowerHiWarningThe value of tmnxDDMRxOpticalPowerHiWarning indicates the Received
Optical Power of the SFF in one tenths of a micro-Watt (uW) that
triggers a hi-warning.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.24 |
tmnxDDMRxOpticalPowerHiAlarmThe value of tmnxDDMRxOpticalPowerHiAlarm indicates the Received
Optical Power of the SFF in one tenths of a micro-Watt (uW) that
triggers a hi-alarm.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.25 |
tmnxDDMRxOpticalPowerTypeThe value of tmnxDDMRxOpticalPowerType indicates whether the
tmnxDDMRxOpticalPower was taken as an average, or as an Optical
Modulation Amplitude (OMA).ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.26 |
tmnxDDMAux1The value of tmnxDDMAux1 indicates the Manufacturer specific
Auxiliary 1 information of the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.27 |
tmnxDDMAux1LowWarningThe value of tmnxDDMAux1LowWarning indicates the Manufacturer specific
Auxiliary 1 low-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.28 |
tmnxDDMAux1LowAlarmThe value of tmnxDDMAux1LowAlarm indicates the Manufacturer specific
Auxiliary 1 low-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.29 |
tmnxDDMAux1HiWarningThe value of tmnxDDMAux1HiWarning indicates the Manufacturer specific
Auxiliary 1 hi-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.30 |
tmnxDDMAux1HiAlarmThe value of tmnxDDMAux1HiAlarm indicates the Manufacturer specific
Auxiliary 1 hi-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.31 |
tmnxDDMAux1TypeThe value of tmnxDDMAux1Type indicates the measurement type of
the Manufacturer specific Auxiliary 1 information of the XFP:
none (0) - not specified.
adp-bias-voltage (1) - LSB is 10mV.
reserved-2 (2) - reserved for future use.
tec-current (3) - LSB is 100uA.
laser-temp (4) - degrees Celsius(C).
laser-wavelength (5) - LSB is 0.05 nm.
voltage-50 (6) - 5.0 supply voltage, LSB=100uV.
voltage-33 (7) - 3.3 supply voltage, LSB=100uV.
voltage-18 (8) - 1.8 supply voltage, LSB=100uV,
voltage-52 (9) - -5.2 supply voltage, LSB=100uV.
current-50 (10) - 5.0V supply current, LSB=100uA.
reserved-11 (11) - reserved for future use.
reserved-12 (12) - reserved for future use.
current-33 (13) - 3.3V supply current, LSB=100uA.
current-18 (14) - 1.8V supply current, LSB=100uA.
current-52 (15) - -5.2V supply current, LSB=100uA.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.32 |
tmnxDDMAux2The value of tmnxDDMAux2 indicates the Manufacturer specific
Auxiliary 2 information of the SFF.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.33 |
tmnxDDMAux2LowWarningThe value of tmnxDDMAux2LowWarning indicates the Manufacturer specific
Auxiliary 2 low-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.34 |
tmnxDDMAux2LowAlarmThe value of tmnxDDMAux2LowAlarm indicates the Manufacturer specific
Auxiliary 2 low-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.35 |
tmnxDDMAux2HiWarningThe value of tmnxDDMAux2HiWarning indicates the Manufacturer specific
Auxiliary 2 hi-warning threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.36 |
tmnxDDMAux2HiAlarmThe value of tmnxDDMAux2HiAlarm indicates the Manufacturer specific
Auxiliary 2 hi-alarm threshold for the XFP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.37 |
tmnxDDMAux2TypeThe value of tmnxDDMAux2Type indicates the measurement type of
the Manufacturer specific Auxiliary 2 information of the XFP:
none (0) - not specified.
adp-bias-voltage (1) - LSB is 10mV.
reserved-2 (2) - reserved for future use.
tec-current (3) - LSB is 100uA.
laser-temp (4) - degrees Celsius(C).
laser-wavelength (5) - LSB is 0.05 nm.
voltage-50 (6) - 5.0 supply voltage, LSB=100uV.
voltage-33 (7) - 3.3 supply voltage, LSB=100uV.
voltage-18 (8) - 1.8 supply voltage, LSB=100uV,
voltage-52 (9) - -5.2 supply voltage, LSB=100uV.
current-50 (10) - 5.0V supply current, LSB=100uA.
reserved-11 (11) - reserved for future use.
reserved-12 (12) - reserved for future use.
current-33 (13) - 3.3V supply current, LSB=100uA.
current-18 (14) - 1.8V supply current, LSB=100uA.
current-52 (15) - -5.2V supply current, LSB=100uA.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.38 |
tmnxDDMFailedThresholdsThe value of tmnxDDMFailedThresholds indicates which objects
of the monitored SFF is in a failed or cleared threshold state.
A set bit indicates that the specified threshold has been exceeded.ro TmnxDigitalDiagnosticFailureBits .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.39 |
tmnxDDMExternallyCalibratedThe value of tmnxDDMExternallyCalibrated indicates whether the
SFP was externally calibrated (true) or internally calibrated (false).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.40 |
tmnxDDMExtCalRxPower4The value of tmnxDDMExtCalRxPower4 indicates the Rx_PWR(4)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.41 |
tmnxDDMExtCalRxPower3The value of tmnxDDMExtCalRxPower3 indicates the Rx_PWR(3)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8462 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.42 |
tmnxDDMExtCalRxPower2The value of tmnxDDMExtCalRxPower2 indicates the Rx_PWR(2)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.43 |
tmnxDDMExtCalRxPower1The value of tmnxDDMExtCalRxPower1 indicates the Rx_PWR(1)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.44 |
tmnxDDMExtCalRxPower0The value of tmnxDDMExtCalRxPower0 indicates the Rx_PWR(0)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.45 |
tmnxDDMExtCalTxLaserBiasSlopeThe value of tmnxDDMExtCalTxLaserBiasSlope indicates the
Tx_l(Slope) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.46 |
tmnxDDMExtCalTxLaserBiasOffsetThe value of tmnxDDMExtCalTxLaserBiasOffset indicates the
Tx_l(Offset) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.47 |
tmnxDDMExtCalTxPowerSlopeThe value of tmnxDDMExtCalTxPowerSlope indicates the
Tx_PWR(Slope) value as specified in Table 3.16 in the
SFF Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.48 |
tmnxDDMExtCalTxPowerOffsetThe value of tmnxDDMExtCalTxPowerOffset indicates the
Tx_PWR(Offset) value as specified in Table 3.16 in the
SFF Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.49 |
tmnxDDMExtCalTemperatureSlopeThe value of tmnxDDMExtCalTemperatureSlope indicates the
T(Slope) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.50 |
tmnxDDMExtCalTemperatureOffsetThe value of tmnxDDMExtCalTemperatureOffset indicates the
T(Offset) value as specified in Table 3.16 in the SFF
Committee Standard's document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.51 |
tmnxDDMExtCalVoltageSlopeThe value of tmnxDDMExtCalVoltageSlope indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.52 |
tmnxDDMExtCalVoltageOffsetThe value of tmnxDDMExtCalVoltageOffset indicates the V(Slope)
value as specified in Table 3.16 in the SFF Committee Standard's
document SFF-8472 Rev 10.2.ro Integer32 (-32767..32768) .1.3.6.1.4.1.6527.3.1.2.2.4.31.1.53 |
tPortAccIngQGrpTableLastChgdThe value of tPortAccIngQGrpTableLastChgd indicates the
timestamp of last change to the tPortAccIngQGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.32 |
tPortAccIngQGrpTableThe value of tPortAccIngQGrpTable defines access Ingress Queue Group
Table for providing, via SNMP, the capability of defining the port
specific queue groups from the queue-groups existing in the
TIMETRA-QOS-MIB::tQosIngQGroupTable. SEQUENCE OF TPortAccIngQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.33 |
tPortAccIngQGrpEntryThe value of tPortAccIngQGrpEntry defines an entry in the
tPortAccIngQGrpTable.
Entries are created/deleted in this table by SNMP sets to
tPortAccIngQGrpRowStatus. TPortAccIngQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.33.1 |
tPortAccIngQGrpNameThe value of tPortAccIngQGrpName defines the port Ingress
Queue Group name. It uniquely identifies a port ingress queue group
in the managed system. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.1 |
tPortAccIngQGrpRowStatusThe value of tPortAccIngQGrpRowStatus allows entries to be
created and deleted in the tPortAccIngQGrpTable.
The creation of an entry in this table will succeed only if the
queue-group being created exists in
TIMETRA-QOS-MIB::tQosIngQGroupTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.2 |
tPortAccIngQGrpLastChgdThe value of tPortAccIngQGrpLastChgd indicates the value of
sysUpTime when the queue entry was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.3 |
tPortAccIngQGrpSchedPolThe value of tPortAccIngQGrpSchedPol specifies the name of
the scheduler-policy to be used with this port ingress queue-group.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.4 |
tPortAccIngQGrpAcctgPolIdThe value of tPortAccIngQGrpAcctgPolId specifies the accounting-policy
to be used with this port ingress queue-group.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this queue-group.
The value zero indicates that the agent should use the default
accounting policy, if one exists.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.5 |
tPortAccIngQGrpCollectStatsThe value of tPortAccIngQGrpCollectStats specifies whether
statistics should be collected on this port ingress queue-group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.6 |
tPortAccIngQGrpDescrThe value of tPortAccIngQGrpDescr specifies the description for
this port queue-group.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.33.1.7 |
tPortAccIngQOverTableLastChgdThe value of tPortAccIngQOverTableLastChgd indicates the
timestamp of last change to the tPortAccIngQOverTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.34 |
tPortAccIngQOverTableThe tPortAccIngQOverTable has an entry for each access port queue
override configured on this system. SEQUENCE OF TPortAccIngQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.35 |
tPortAccIngQOverEntryEach row represents a particular port-queue override. Entries are
created and deleted by the user. TPortAccIngQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.35.1 |
tPortAccIngQOverQueueThe value of tPortAccIngQOverQueue specifies the queue ID
which is used as the fourth index to the table entry. TIngressQueueId .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.1 |
tPortAccIngQOverRowStatusThe value of tPortAccIngQOverRowStatus is used for the creation
and deletion of port-queue overrides.
Row creation will fail if there is no entry in the
TIMETRA-QOS-MIB::tQosIngQueueTable with the same index values as the
last two indices of this table
(tPortAccIngQGrpName.tPortAccIngQOverQueue).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.2 |
tPortAccIngQOverLastChangedThe value of tPortAccIngQOverLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.3 |
tPortAccIngQOverCBSThe value of tPortAccIngQOverCBS specifies the amount of reserved
buffer space for the queue.rw TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.4 |
tPortAccIngQOverMBSThe value of tPortAccIngQOverMBS specifies the maximum amount of
buffer space allowed for the queue.
This object is replaced with tPortAccIngQOverMBSBytes object.rwobsolete TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.5 |
tPortAccIngQOverHiPrioOnlyThe value of tPortAccIngQOverHiPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority packets.rw TBurstPercentOrDefaultOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.6 |
tPortAccIngQOverAdminPIRThe value of tPortAccIngQOverAdminPIR specifies the administrative
PIR specified by the user.rw TPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.7 |
tPortAccIngQOverAdminCIRThe value of tPortAccIngQOverAdminCIR specifies the administrative
CIR specified by the user.rw TCIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.8 |
tPortAccIngQOverPIRAdaptationThe value of tPortAccIngQOverPIRAdaptation specifies the adaptation
rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.9 |
tPortAccIngQOverCIRAdaptationThe value of tPortAccIngQOverCIRAdaptation specifies the adaptation
rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.10 |
tPortAccIngQOverMBSBytesThe value of tPortAccIngQOverMBSBytes specifies the maximum amount of
buffer space allowed for the queue.rw TBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.35.1.11 |
tPortAccEgrQGrpTableLastChgdThe value of tPortAccEgrQGrpTableLastChgd indicates the
timestamp of last change to the tPortAccEgrQGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.36 |
tPortAccEgrQGrpTableThe value of tPortAccEgrQGrpTable defines access Egress Queue Group
Table for providing, via SNMP, the capability of defining the port
specific queue groups from the queue-groups existing in the
TIMETRA-QOS-MIB::tQosEgrQGroupTable. SEQUENCE OF TPortAccEgrQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.37 |
tPortAccEgrQGrpEntryThe value of tPortAccEgrQGrpEntry defines an entry in the
tPortAccEgrQGrpTable.
Entries are created/deleted in this table by SNMP sets to
tPortAccEgrQGrpRowStatus. TPortAccEgrQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.37.1 |
tPortAccEgrQGrpNameThe value of tPortAccEgrQGrpName defines the port Egress Queue
Group name. It uniquely identifies a port egress queue group in the
managed system. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.1 |
tPortAccEgrQGrpRowStatusThe value of tPortAccEgrQGrpRowStatus allows entries to be
created and deleted in the tPortAccEgrQGrpTable.
The creation of an entry in this table will succeed only if the
queue-group being created exist in TIMETRA-QOS-MIB::tQosEgrQGroupTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.2 |
tPortAccEgrQGrpLastChgdThe value of tPortAccEgrQGrpLastChgd indicates the value of
sysUpTime when the queue entry was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.3 |
tPortAccEgrQGrpSchedPolThe value of tPortAccEgrQGrpSchedPol specifies the name of the
scheduler-policy to be used with this port egress queue-group.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.4 |
tPortAccEgrQGrpAggRateLimitThe value of tPortAccEgrQGrpAggRateLimit specifies the maximum
total rate of all egress queues in this queue-group. The
value '-1' means that there is no limit.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.5 |
tPortAccEgrQGrpAcctgPolIdThe value of tPortAccEgrQGrpAcctgPolId specifies the accounting-policy
to be used with this port egress queue-group.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this queue-group.
The value zero indicates that the agent should use the default
accounting policy, if one exists.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.6 |
tPortAccEgrQGrpCollectStatsThe value of tPortAccEgrQGrpCollectStats specifies whether
statistics should be collected on this port egress queue-group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.7 |
tPortAccEgrQGrpFrameBaseActgThe value of tPortAccEgrQGrpFrameBaseActg specifies whether
to use frame-based accounting for this port egress queue-group.
If the value is 'false', the default packet-based accounting
method will be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.8 |
tPortAccEgrQGrpDescrThe value of tPortAccEgrQGrpDescr specifies the description for
this port queue-group.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.37.1.9 |
tPortAccEgrQOverTableLastChgdThe value of tPortAccEgrQOverTableLastChgd indicates the timestamp
of last change to the tPortAccEgrQOverTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.38 |
tPortAccEgrQOverTableThe tPortAccEgrQOverTable has an entry for each access port queue
override configured on this system. SEQUENCE OF TPortAccEgrQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.39 |
tPortAccEgrQOverEntryEach row represents a particular port-queue override. Entries
are created and deleted by the user. TPortAccEgrQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.39.1 |
tPortAccEgrQOverQueueThe value of tPortAccEgrQOverQueue specifies the queue ID which is
used as the fourth index to the table entry. TEgressQueueId .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.1 |
tPortAccEgrQOverRowStatusThe value of tPortAccEgrQOverRowStatus is used for the
creation and deletion of port-queue overrides.
Row creation will fail if there is no entry in the
TIMETRA-QOS-MIB::tQosEgrQueueTable with the same index values as the
last two indices of this table
(tPortAccEgrQGrpName.tPortAccEgrQOverQueue).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.2 |
tPortAccEgrQOverLastChangedThe value of tPortAccEgrQOverLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.3 |
tPortAccEgrQOverCBSThe value of tPortAccEgrQOverCBS specifies the amount of reserved
buffer space for the queue.rw TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.4 |
tPortAccEgrQOverMBSThe value of tPortAccEgrQOverMBS specifies the maximum amount of
buffer space allowed for the queue.
This object is replaced with tPortAccEgrQOverMBSBytes object.rwobsolete TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.5 |
tPortAccEgrQOverHiPrioOnlyThe value of tPortAccEgrQOverHiPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority packets.rw TBurstPercentOrDefaultOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.6 |
tPortAccEgrQOverAdminPIRThe value of tPortAccEgrQOverAdminPIR specifies the administrative
PIR specified by the user.
An 'inconsistentValue' error is returned if tPortAccEgrQOverAdminPIR
is set to non-default value when the object tPortAccEgrQOverRateType is
set to 'percent'.rw TPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.7 |
tPortAccEgrQOverAdminCIRThe value of tPortAccEgrQOverAdminCIR specifies the administrative
CIR specified by the user.
An 'inconsistentValue' error is returned if tPortAccEgrQOverAdminCIR
is set to non-default value when the object tPortAccEgrQOverRateType is
set to 'percent'.rw TCIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.8 |
tPortAccEgrQOverPIRAdaptationThe value of tPortAccEgrQOverPIRAdaptation specifies the adaptation
rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.9 |
tPortAccEgrQOverCIRAdaptationThe value of tPortAccEgrQOverCIRAdaptation specifies the adaptation
rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.10 |
tPortAccEgrQOverMBSBytesThe value of tPortAccEgrQOverMBSBytes specifies the maximum amount of
buffer space allowed for the queue.rw TBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.11 |
tPortAccEgrQOverAdminPIRPercentThe value of tPortAccEgrQOverAdminPIRPercent specifies the administrative
PIR percentage, in hudredths of a percent.
An 'inconsistentValue' error is returned if tPortAccEgrQOverAdminPIRPercent
is set to non-default value when the object tPortAccEgrQOverRateType is set
to 'kbps'.rw TPIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.12 |
tPortAccEgrQOverAdminCIRPercentThe value of tPortAccEgrQOverAdminCIRPercent specifies the administrative
CIR percentage, in hudredths of a percent.
An 'inconsistentValue' error is returned if tPortAccEgrQOverAdminCIRPercent
is set to non-default value when the object tPortAccEgrQOverRateType is set
to 'kbps'.rw TCIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.13 |
tPortAccEgrQOverRateTypeThe value of tPortAccEgrQOverRateType specifies the type of Egress queue
rate.
When the value of the object is set to 'kbps', the egresss queue rates
are specified in kbps. The objects tPortAccEgrQOverAdminPIRPercent and
tPortAccEgrQOverAdminCIRPercent will be set to their default values.
When the value of the object is set to 'percent', the egress queue rates
are specified in percentage. The objects tPortAccEgrQOverAdminPIR and
tPortAccEgrQOverAdminCIR will be set to their default values.rw TRateType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.39.1.14 |
tPortNetEgrQGrpTableLastChgdThe value of tPortNetEgrQGrpTableLastChgd indicates the
timestamp of last change to the tPortNetEgrQGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.40 |
tPortNetEgrQGrpTableThe value of tPortNetEgrQGrpTable defines network Egress Queue Group
Table for providing, via SNMP, the capability of defining the port
specific queue groups from the queue-groups existing in the
TIMETRA-QOS-MIB::tQosEgrQGroupTable. SEQUENCE OF TPortNetEgrQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.41 |
tPortNetEgrQGrpEntryThe value of tPortNetEgrQGrpEntry defines an entry in the
tPortNetEgrQGrpTable.
Entries are created/deleted in this table by SNMP sets to
tPortNetEgrQGrpRowStatus. TPortNetEgrQGrpEntry .1.3.6.1.4.1.6527.3.1.2.2.4.41.1 |
tPortNetEgrQGrpNameThe value of tPortNetEgrQGrpName defines the port Egress Queue
Group name. It, along with tPortNetEgrQGrpInstanceId uniquely
identifies a port egress queue group in the managed system. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.1 |
tPortNetEgrQGrpRowStatusThe value of tPortNetEgrQGrpRowStatus allows entries to be
created and deleted in the tPortNetEgrQGrpTable.
The creation of an entry in this table will succeed only if the
queue-group being created exist in TIMETRA-QOS-MIB::tQosEgrQGroupTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.2 |
tPortNetEgrQGrpLastChgdThe value of tPortNetEgrQGrpLastChgd indicates the value of
sysUpTime when the queue entry was last modified.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.3 |
tPortNetEgrQGrpSchedPolThe value of tPortNetEgrQGrpSchedPol specifies the name of the
scheduler-policy to be used with this port egress queue-group.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.4 |
tPortNetEgrQGrpAggRateLimitThe value of tPortNetEgrQGrpAggRateLimit specifies the maximum
total rate of all egress queues in this queue-group. The
value '-1' means that there is no limit.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.5 |
tPortNetEgrQGrpAcctgPolIdThe value of tPortNetEgrQGrpAcctgPolId specifies the accounting-policy
to be used with this port egress queue-group.
A non-zero value indicates the tmnxLogApPolicyId index identifying the
policy entry in the tmnxLogApTable from the TIMETRA-LOG-MIB which is
associated with this queue-group.
The value zero indicates that the agent should use the default
accounting policy, if one exists.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.6 |
tPortNetEgrQGrpCollectStatsThe value of tPortNetEgrQGrpCollectStats specifies whether
statistics should be collected on this port egress queue-group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.7 |
tPortNetEgrQGrpFrameBaseActgThe value of tPortNetEgrQGrpFrameBaseActg specifies whether
to use frame-based accounting for this port egress queue-group.
If the value is 'false', the default packet-based accounting
method will be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.8 |
tPortNetEgrQGrpDescrThe value of tPortNetEgrQGrpDescr specifies the description for
this port queue-group.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.9 |
tPortNetEgrQGrpPlcrCntrlPolicyThe value of tPortNetEgrQGrpPlcrCntrlPolicy specifies the network
egress policer control policy applicable to this port egress
queue-group.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.10 |
tPortNetEgrQGrpInstanceIdThe value of tPortNetEgrQGrpInstanceId defines the unique instance of
the port Egress Queue Group. It, along with tPortNetEgrQGrpName,
uniquely identifies a port egress queue group in the managed system. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.41.1.11 |
tPortNetEgrQOverTableLastChgdThe value of tPortNetEgrQOverTableLastChgd indicates the timestamp
of last change to the tPortNetEgrQOverTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.42 |
tPortNetEgrQOverTableThe tPortNetEgrQOverTable has an entry for each port queue override
configured on this system. SEQUENCE OF TPortNetEgrQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.43 |
tPortNetEgrQOverEntryEach row represents a particular port-queue override. Entries
are created and deleted by the user. TPortNetEgrQOverEntry .1.3.6.1.4.1.6527.3.1.2.2.4.43.1 |
tPortNetEgrQOverQueueThe value of tPortNetEgrQOverQueue specifies the queue ID which is
used as the fourth index to the table entry. TEgressQueueId .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.1 |
tPortNetEgrQOverRowStatusThe value of tPortNetEgrQOverRowStatus is used for the
creation and deletion of port-queue overrides.
Row creation will fail if there is no entry in the
TIMETRA-QOS-MIB::tQosEgrQueueTable with the same index values as the
last two indices of this table
(tPortNetEgrQGrpName.tPortNetEgrQOverQueue).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.2 |
tPortNetEgrQOverLastChangedThe value of tPortNetEgrQOverLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.3 |
tPortNetEgrQOverCBSThe value of tPortNetEgrQOverCBS specifies the amount of reserved
buffer space for the queue.rw TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.4 |
tPortNetEgrQOverMBSThe value of tPortNetEgrQOverMBS specifies the maximum amount of
buffer space allowed for the queue.
This object is replaced with tPortNetEgrQOverMBSBytes object.rwobsolete TBurstSizeOverride UNITS "kilo-bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.5 |
tPortNetEgrQOverHiPrioOnlyThe value of tPortNetEgrQOverHiPrioOnly specifies the percentage of
buffer space for the queue, used exclusively by high priority packets.rw TBurstPercentOrDefaultOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.6 |
tPortNetEgrQOverAdminPIRThe value of tPortNetEgrQOverAdminPIR specifies the administrative
PIR specified by the user.
An 'inconsistentValue' error is returned if tPortNetEgrQOverAdminPIR
is set to non-default value when the object tPortNetEgrQOverRateType is
set to 'percent'.rw TPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.7 |
tPortNetEgrQOverAdminCIRThe value of tPortNetEgrQOverAdminCIR specifies the administrative
CIR specified by the user.
An 'inconsistentValue' error is returned if tPortNetEgrQOverAdminCIR
is set to non-default value when the object tPortNetEgrQOverRateType is
set to 'percent'.rw TCIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.8 |
tPortNetEgrQOverPIRAdaptationThe value of tPortNetEgrQOverPIRAdaptation specifies the adaptation
rule to be used while computing the operational PIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.9 |
tPortNetEgrQOverCIRAdaptationThe value of tPortNetEgrQOverCIRAdaptation specifies the adaptation
rule to be used while computing the operational CIR
value. The adaptation rule specifies the rules to compute the
operational values while maintaining minimum offset.rw TAdaptationRuleOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.10 |
tPortNetEgrQOverMBSBytesThe value of tPortNetEgrQOverMBSBytes specifies the maximum amount of
buffer space allowed for the queue.rw TBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.11 |
tPortNetEgrQOverAdminPIRPercentThe value of tPortNetEgrQOverAdminPIRPercent specifies the administrative
PIR percentage, in hudredths of a percent.
An 'inconsistentValue' error is returned if tPortNetEgrQOverAdminPIRPercent
is set to non-default value when the object tPortNetEgrQOverRateType is set
to 'kbps'.rw TPIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.12 |
tPortNetEgrQOverAdminCIRPercentThe value of tQosEgrQueueAdminCIRPercent specifies the administrative
CIR percentage, in hudredths of a percent.
An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent
is set to non-default value when the object tPortNetEgrQOverRateType is set
to 'kbps'.rw TCIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.13 |
tPortNetEgrQOverRateTypeThe value of tPortNetEgrQOverRateType specifies the type of Egress queue
rate.
When the value of the object is set to 'kbps', the egresss queue rates
are specified in kbps. The objects tPortNetEgrQOverAdminPIRPercent and
tPortNetEgrQOverAdminCIRPercent will be set to their default values.
When the value of the object is set to 'percent', the egress queue rates
are specified in percentage. The objects tPortNetEgrQOverAdminPIR and
tPortNetEgrQOverAdminCIR will be set to their default values.rw TRateType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.43.1.14 |
tmnxBundleMlfrTableThe tmnxBundleMlfrTable contains MLFR specific data. SEQUENCE OF TmnxBundleMlfrEntry .1.3.6.1.4.1.6527.3.1.2.2.4.44 |
tmnxBundleMlfrEntryEach row entry contains data on an MLFR Bundle. TmnxBundleMlfrEntry .1.3.6.1.4.1.6527.3.1.2.2.4.44.1 |
tmnxBundleMlfrBundleIdThe value of tmnxBundleMlfrBundleId is the Bundle Identifier
sent with each Link Integrity Protocol message for each member
of a tmnxBundleBundleID.
The object tmnxPortAdminStatus must be set to 'outOfService' to
change this value.rw SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.1 |
tmnxBundleMlfrIngQoSProfIdThe value of tmnxBundleMlfrIngQoSProfId specifies the ingress
QoS profile to be used for the incoming traffic over this MLFR
bundle.
The value of tmnxBundleMlfrIngQoSProfId of 0 indicates
a default QoS profile is used as applicable to given hardware.rw TMcFrQoSProfileId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.4 |
tmnxBundleMlfrEgrQoSProfIdThe value of tmnxBundleMlfrEgrQoSProfId specifies the egress
QoS profile to be used for the outgoing traffic over this MLFR
bundle.
The value of tmnxBundleMlfrEgrQoSProfId of 0 indicates
a default profile is used as applicable to given hardware.rw TMcFrQoSProfileId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.5 |
tmnxBundleMlfrHelloTimerThe value of tmnxBundleMlfrHelloTimer specifies the rate
at which hello messages are sent across a member link.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.6 |
tmnxBundleMlfrHelloRetryCountThe value of tmnxBundleMlfrHelloTimer specifies the number
of times to attempt to resend hello messages when the
tmnxBundleMlfrAckTimer has expired before taking action.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.7 |
tmnxBundleMlfrAckTimerThe value of tmnxBundleMlfrAckTimer specifies the length
of time to wait for acknowledgment of a hello message
before declaring the hello message has not been received.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.8 |
tmnxBundleMlfrLastChangedThe value of tmnxBundleMlfrLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.44.1.9 |
tmnxPortIngQosQStatTableA table that contains ingress QoS queue-group queue
port statistics. SEQUENCE OF TmnxPortIngQosQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.45 |
tmnxPortIngQosQStatEntryIngress statistics about a specific port's
QoS queue-group queue. TmnxPortIngQosQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.45.1 |
tmnxPortIngQosQStatQueueIdThe value of tmnxPortIngQosQStatQueueId specifies the queue-group
queue ID which is used as the fourth index to the table entry. TIngressQueueId .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.1 |
tmnxPortIngQosQStatOffHiPrioPktsThe value of tmnxPortIngQosQStatOffHiPrioPkts indicates the number of
high priority packets, as determined by the port ingress QoS
policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.2 |
tmnxPortIngQosQStatDpdHiPrioPktsThe value of tmnxPortIngQosQStatDpdHiPrioPkts indicates the number of
high priority packets, as determined by the port ingress QoS
policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.3 |
tmnxPortIngQosQStatOffLoPrioPktsThe value of tmnxPortIngQosQStatOffLoPrioPkts indicates the number of
low priority packets, as determined by the port ingress QoS
policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.4 |
tmnxPortIngQosQStatDpdLoPrioPktsThe value of tmnxPortIngQosQStatDpdLoPrioPkts indicates the number of
low priority packets, as determined by the port ingress QoS
policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.5 |
tmnxPortIngQosQStatOffHiPrioOctsThe value of tmnxPortIngQosQStatOffHiPrioOcts indicates the number of
high priority octets, as determined by the port ingress QoS
policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.6 |
tmnxPortIngQosQStatDpdHiPrioOctsThe value of tmnxPortIngQosQStatDpdHiPrioOcts indicates the number of
high priority octets, as determined by the port ingress QoS
policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.7 |
tmnxPortIngQosQStatOffLoPrioOctsThe value of tmnxPortIngQosQStatOffLoPrioOcts indicates the number of
low priority octets, as determined by the port ingress QoS
policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.8 |
tmnxPortIngQosQStatDpdLoPrioOctsThe value of tmnxPortIngQosQStatDpdLoPrioOcts indicates the number of
low priority octets, as determined by the port ingress QoS
policy, dropped by the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.9 |
tmnxPortIngQosQStatFwdInProfPktsThe value of tmnxPortIngQosQStatFwdInProfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.10 |
tmnxPortIngQosQStatFwdOutProfPktsThe value of tmnxPortIngQosQStatFwdOutProfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.11 |
tmnxPortIngQosQStatFwdInProfOctsThe value of tmnxPortIngQosQStatFwdInProfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.12 |
tmnxPortIngQosQStatFwdOutProfOctsThe value of tmnxPortIngQosQStatFwdOutProfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.13 |
tmnxPortIngQosQStatUncolPktsOffThe value of tmnxPortIngQosQStatUncolPktsOff indicates the number of
uncolored packets offered to the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.14 |
tmnxPortIngQosQStatUncolOctsOffThe value of tmnxPortIngQosQStatUncolOctsOff indicates the number of
uncolored octets offered to the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.45.1.15 |
tmnxPortEgrQosQStatTableA table that contains egress QoS queue-group queue
port statistics. SEQUENCE OF TmnxPortEgrQosQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.46 |
tmnxPortEgrQosQStatEntryEgress statistics about a specific port's
QoS queue-group queue. TmnxPortEgrQosQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.4.46.1 |
tmnxPortEgrQosQStatQueueIdThe value of tmnxPortEgrQosQStatQueueId specifies the queue-group
queue ID which is used as the fourth index to the table entry. TEgressQueueId .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.1 |
tmnxPortEgrQosQStatFwdInProfPktsThe value of tmnxPortEgrQosQStatFwdInProfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.2 |
tmnxPortEgrQosQStatDpdInProfPktsThe value of tmnxPortEgrQosQStatDpdInProfPkts indicates the number of
in-profile packets discarded by the egress Qchip due to: MBS exceeded,
buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.3 |
tmnxPortEgrQosQStatFwdOutProfPktsThe value of tmnxPortEgrQosQStatFwdOutProfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.4 |
tmnxPortEgrQosQStatDpdOutProfPktsThe value of tmnxPortEgrQosQStatDpdOutProfPkts indicates the number of
out-of-profile packets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.5 |
tmnxPortEgrQosQStatFwdInProfOctsThe value of tmnxPortEgrQosQStatFwdInProfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.6 |
tmnxPortEgrQosQStatDpdInProfOctsThe value of tmnxPortEgrQosQStatDpdInProfOcts indicates the number of
in-profile octets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.7 |
tmnxPortEgrQosQStatFwdOutProfOctsThe value of tmnxPortEgrQosQStatFwdOutProfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.8 |
tmnxPortEgrQosQStatDpdOutProfOctsThe value of tmnxPortEgrQosQStatDpdOutProfOcts indicates the number of
out-of-profile octets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.4.46.1.9 |
tmnxBundleMemberMlfrTableThe tmnxBundleMemberMlfrTable has an entry for a
frame-relay link associated with an MLFR Bundle. SEQUENCE OF TmnxBundleMemberMlfrEntry .1.3.6.1.4.1.6527.3.1.2.2.4.47 |
tmnxBundleMemberMlfrEntryEach row entry represents an frame-relay link associated with
a MLFR Bundle. TmnxBundleMemberMlfrEntry .1.3.6.1.4.1.6527.3.1.2.2.4.47.1 |
tmnxBundleMemberMlfrDownReasonThe value of tmnxBundleMemberMlfrDownReason indicates the reason code
for marking the MLFR member link of the bundle to down (i.e.
tmnxBundleMemberActive will be set to false).ro TmnxMlfrLinkDownReason .1.3.6.1.4.1.6527.3.1.2.2.4.47.1.1 |
tmnxWaveTrackerTableThe tmnxWaveTrackerTable has an entry for each Wavelength Tracker
port on each IOM card in each chassis in the TMNX system. SEQUENCE OF TmnxWaveTrackerEntry .1.3.6.1.4.1.6527.3.1.2.2.4.48 |
tmnxWaveTrackerEntryEach row entry represents a Wave Tracker capable port on a
IOM card in a chassis in the system. Entries cannot be created
and deleted via SNMP SET operations. The tmnxWaveTrackerEntry
contains attributes that are unique to the Wave Tracker capable ports. TmnxWaveTrackerEntry .1.3.6.1.4.1.6527.3.1.2.2.4.48.1 |
tmnxWaveTrackerPowerCtrlEnableThe value of tmnxWaveTrackerPowerCtrlEnable specifies whether or not
the Wavelength Tracker Power Control loop that maintains the
interface's transmitted optical signal average output power is enabled.
tmnxWaveTrackerPowerCtrlEnable is equivalent to
'tnWtEncodePortCapabilityProgrammed' of the 1696-Roadm MIBs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.48.1.1 |
tmnxWaveTrackerEncodeEnablethe value of tmnxWaveTrackerEncodeEnable specifies whether or not
the Wavelength Tracker Encoding of Wave Keys on the interface's
transmitted optical signal is enabled.
tmnxWaveTrackerEncodeEnable is equivalent to
'tnWaveKeyEncodeTransmitState' of the 1696-Roadm MIBs.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.48.1.2 |
tmnxWaveTrackerInUseThe value of tmnxWaveTrackerInUse indicates whether or not the
Wavelength Tracker feature is in use by the system for services.
tmnxWaveTrackerInUse is equivalent to
'tnWtEncodePortCapabilityInUse' of the 1696-Roadm MIBs.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.4.48.1.3 |
tmnxWaveTrackerTargetPowerThe value of tmnxWaveTrackerTargetPower specifies the desired average
output power of the interface's transmitted optical signal when
tmnxWaveTrackerPowerCtrlEnable is set to 'true (1)'.
The UNITS millibels (mBm) are units of 0.01 decibel relative
to one milliwatt (dBm) or dBm multiplied by 100.
The mBm is used when integers are required instead of floating point.
For example: -5.21 dBm is equivalent to -521 mBm.rw Integer32 (-2200..300) UNITS "mBm" .1.3.6.1.4.1.6527.3.1.2.2.4.48.1.4 |
tmnxPortPlcyObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.4.67 |
tmnxPortNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.7 |
tmnxFRObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.9 |
tmnxFRDlcmiTableThe tmnxFRDlcmiTable has an entry for each port in the
system that is configured for Frame Relay. It contains
the parameters for the Data Link Connection Management
Interface (DLCMI) for the frame relay service on this port. SEQUENCE OF TmnxFRDlcmiEntry .1.3.6.1.4.1.6527.3.1.2.2.9.1 |
tmnxFRDlcmiEntryThe Parameters for a particular Data Link Connection
Management Interface. Entries cannot be created and
deleted via SNMP SET operations. TmnxFRDlcmiEntry .1.3.6.1.4.1.6527.3.1.2.2.9.1.1 |
tmnxFRDlcmiModetmnxFRDlcmiMode is used to set the mode of the interface.
It can be set as Data terminal equipment (dte),
Data circuit-terminating equipment (dce) or both as Data
terminal equipment and Data circuit-terminating
equipment (bidir).rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.1 |
tmnxFRDlcmiN392DcetmnxFRDlcmiN392Dce is used to configure the LMI error
threshold for DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.2 |
tmnxFRDlcmiN393DcetmnxFRDlcmiN393Dce is used to configure the LMI monitored
event count for DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.3 |
tmnxFRDlcmiT392DcetmnxFRDlcmiT392Dce is used to configure the polling verification
timer for the Frame Relay DCE interface.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.4 |
tmnxFRDlcmiTxStatusEnqMsgstmnxFRDlcmiTxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages transmitted on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.5 |
tmnxFRDlcmiRxStatusEnqMsgstmnxFRDlcmiRxStatusEnqMsgs indicates the number of LMI Status
Enquiry messages received on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.6 |
tmnxFRDlcmiStatusEnqMsgTimeoutstmnxFRDlcmiStatusEnqMsgTimeouts indicates the number of times
the LMI agent did not receive a Status Enquiry message within
the allotted time.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.7 |
tmnxFRDlcmiTxStatusMsgstmnxFRDlcmiTxStatusMsgs indicates the number of LMI Status
messages transmitted on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.8 |
tmnxFRDlcmiRxStatusMsgstmnxFRDlcmiRxStatusMsgs indicates the number of LMI Status
messages received on this Frame Relay interface.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.9 |
tmnxFRDlcmiStatusMsgTimeoutstmnxFRDlcmiStatusMsgTimeouts indicates the number of times
the LMI agent did not receive a Status message within the
allotted time.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.10 |
tmnxFRDlcmiDiscardedMsgstmnxFRDlcmiDiscardedMsgs indicates the number of times
the LMI agent discarded a received message because it
wasn't expecting it, the type of message was incorrect,
or the contents of the message were invalid.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.11 |
tmnxFRDlcmiInvRxSeqNumMsgstmnxFRDlcmiInvRxSeqNumMsgs indicates the number of times
the LMI agent received a message with an invalid receive
sequence number: i.e. a sequence number that does not
match the last transmitted sequence number of the agent.ro Counter32 UNITS "messages" .1.3.6.1.4.1.6527.3.1.2.2.9.1.1.12 |
tmnxFrIntfTableThe tmnxFrIntfTable has an entry for each port/channel in the
system that is configured for Frame Relay. It contains Frame Relay
configuration parameters. SEQUENCE OF TmnxFrIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.9.2 |
tmnxFrIntfEntryThe Parameters for a particular FR Interface. Entries cannot be
created or deleted via SNMP SET operations.
Entries will exist in this table when tmnxPortEncapType is set
to frEncap. TmnxFrIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.9.2.1 |
tmnxFrIntfFrf12ModeThe value of tmnxFrIntfFrf12Mode enables or disables the
use of FRF12 headers. This cannot be set to 'enabled'
for entries with a tmnxPortBundleNumber set or bundles with
a tmnxBundleType of mlfr.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.9.2.1.1 |
tmnxFrIntfLinkIdThe value of tmnxFrIntfLinkId is a Link Identifier
that is used when this entry is added to a MLFR bundle.rw SnmpAdminString .1.3.6.1.4.1.6527.3.1.2.2.9.2.1.2 |
tmnxFrIntfLastChangedThe value of tmnxFrIntfLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.9.2.1.3 |
tmnxFrf12IntfTableThe tmnxFrf12IntfTable contains entries for a port/channel
that has frf12 mode 'enabled'. SEQUENCE OF TmnxFrf12IntfEntry .1.3.6.1.4.1.6527.3.1.2.2.9.3 |
tmnxFrf12IntfEntryEach row represents a particular frame-relay interface that has
enabled frf12 on a port/channel.
Each row in this table is added/removed when frf12 is enabled
on a port/channel. TmnxFrf12IntfEntry .1.3.6.1.4.1.6527.3.1.2.2.9.3.1 |
tmnxFrf12IntfFragmentThresholdThe value of tmnxFrf12IntfFragmentThreshold specifies the
maximum length of a fragment to be transmitted.
A value of 0 specifies no fragmentation.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.9.3.1.1 |
tmnxFrf12IntfEgrQoSProfIdThe value of tmnxFrf12IntfEgrQoSProfId specifies the egress
QoS profile to be used for the outgoing traffic over this frf12
frame-relay interface.
The value of tmnxFrf12IntfEgrQoSProfId of 0 indicates
a default QoS profile is used as applicable to given hardware.rw TMcFrQoSProfileId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.9.3.1.2 |
tmnxFrf12IntfLastChangedThe value of tmnxFrf12IntfLastChanged indicates the value
of sysUpTime at the time of the most recent management change to
this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.9.3.1.3 |
tmnxQosAppObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.10 |
tmnxQosPoolAppTableThis table maintains associations of the buffer pools with the
individual objects. SEQUENCE OF TmnxQosPoolAppEntry .1.3.6.1.4.1.6527.3.1.2.2.10.2 |
tmnxQosPoolAppEntryThis entry maintains the specifics about the association of a
buffer pool and an object. TmnxQosPoolAppEntry .1.3.6.1.4.1.6527.3.1.2.2.10.2.1 |
tmnxObjectTypeThe object tmnxObjectType defines the type of object to which the
pool is being setup for. Enumeration .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.1 |
tmnxObjectIdtmnxObjectId is used to identify the specific object. If
tmnxObjectType is 'mda', then the tmnxObjectId is encoded as a
physical port with the port being '0'. For all other types the
encoding is done as per the description of TmnxPortID. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.2 |
tmnxObjectAppTypeThe object tmnxObjectAppType specifies the nature of usage the pool
would be used for. The pools could be used for access or network
traffic at either ingress or egress.
The value mpointQueues (51) is valid only for 7210-SAS-X platform. Enumeration .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.3 |
tmnxObjectAppPooltmnxObjectAppPool specifies the name of the pool to be used/created. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.4 |
tmnxObjectAppPoolRowStatusThe object tmnxObjectAppPoolRowStatus is used to create or remove a
pool application to the object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.5 |
tmnxObjectAppResvCbsThe percentage of pool size reserved for CBS. The value '-1'
implies that the reserved CBS should be computed as the sum of
the CBS requested by the entities using this pool if the application
point is 'network'. For 'access' application points the value '-1'
means a default of 30%.rw Integer32 (-1|0..100) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.6 |
tmnxObjectAppSlopePolicytmnxObjectAppSlopePolicy specifies the slope policy being used for
this pool. The Slope policies define the nature of the RED Slopes for
the high and the low priority traffic.rw TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.7 |
tmnxObjectAppPoolSizeSize in percentage of buffer space. The value '-1' implies that
the pool size should be computed as per fair weighing between
all other pools.rw Integer32 (-1|0..100) .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.8 |
tmnxObjectAppResvCbsAmbrAlrmStepThe value of tmnxObjectAppResvCbsAmbrAlrmStep specifies the
percentage step-size for the reserved CBS size of the pool.
When tmnxObjectAppResvCbsAmbrAlrmStep is set to default value, the
adaptive CBS sizing is disabled. To enable adaptive CBS sizing,
tmnxObjectAppResvCbsAmbrAlrmStep MUST be set to non-default value along
with tmnxObjectAppResvCbsAmbrAlrmMax. When reserved CBS is set to
default value, adaptive CBS sizing cannot be enabled. The reserved CBS
(Committed Burst Size) defines the amount of buffer space within the
pool that is not considered shared.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.9 |
tmnxObjectAppResvCbsAmbrAlrmMaxThe value of tmnxObjectAppResvCbsAmbrAlrmMax specifies the
maximum percentage for the reserved CBS size of the pool.
When tmnxObjectAppResvCbsAmbrAlrmMax is set to default value, the
adaptive CBS sizing is disabled. To enable adaptive CBS sizing,
tmnxObjectAppResvCbsAmbrAlrmMax MUST be set to non-default value along
with tmnxObjectAppResvCbsAmbrAlrmStep. When reserved CBS is set to
default value, adaptive CBS sizing cannot be enabled. The reserved CBS
(Committed Burst Size) defines the amount of buffer space within the
pool that is not considered shared. Max reserved CBS must not be more
than the reserved CBS.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.10 |
tmnxObjectAppAmbrAlrmThreshThe value of tmnxObjectAppAmbrAlrmThresh specifies the
threshold for the amber alarm on the over-subscription allowed.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.11 |
tmnxObjectAppRedAlrmThreshThe value of tmnxObjectAppRedAlrmThresh specifies the
threshold for the red alarm on the over-subscription allowed.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.10.2.1.12 |
tmnxATMObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.11 |
tmnxATMIntfTableThe tmnxATMIntfTable has an entry for each port/channel in the
system that is configured for ATM. It contains ATM cell layer
configuration parameters. SEQUENCE OF TmnxATMIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.11.1 |
tmnxATMIntfEntryThe Parameters for a particular ATM Cell
Management Interface. Entries cannot be created or
deleted via SNMP SET operations.
Entries will exist in this table when ATM encapsulation
is configured on the port/channel. TmnxATMIntfEntry .1.3.6.1.4.1.6527.3.1.2.2.11.1.1 |
tmnxATMIntfCellFormattmnxATMIntfCellFormat is used to set the cell format
(UNI or NNI) that is to be used on the ATM interface.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.1 |
tmnxATMIntfMinVpValuetmnxATMIntfMinVpValue is used to set the minimum
allowable VPI value that can be used on the
ATM interface for a VPC.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.2 |
tmnxATMIntfMappingThe value of tmnxATMIntfMapping specifies the cell
mapping that is to be used on this ATM interface. When
tmnxPortChanType does not have a value of 'pdhDs3 (14)',
'inconsistentValue' error will be returned to SNMP SET
requests. When tmnxPortChanType has a value of 'pdhDs3 (14)',
tmnxATMIntfMapping can be set to 'plcp (2)'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.3 |
tmnxATMIntfCustomBufferModeThe value of tmnxATMIntfCustomBufferMode specifies whether
port is in a mode that allows custom configuration of port buffer
pool and VC thresholds.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.4 |
tmnxATMIntfBufferPoolThe value of tmnxATMIntfBufferPool specifies the percentage
of the buffers configured on this interface over the
maximum allowed on this interface.
The value can only be changed if tmnxATMIntfCustomBufferMode
is set to 'true'. Changing tmnxATMIntfCustomBufferMode to
'false' will reset tmnxATMIntfBufferPool back to the default
value.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.5 |
tmnxATMIntfVcThresholdThe value of tmnxATMIntfVcThreshold specifies the VC buffer
threshold for all VCs configured on this port.
The value can only be changed if tmnxATMIntfCustomBufferMode
is set to 'true'. Changing tmnxATMIntfCustomBufferMode to
'false' will reset tmnxATMIntfVcThreshold back to the default
value.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.2.11.1.1.6 |
tmnxPortATMVpShaperTblLastChThe value of tmnxPortATMVpShaperTblLastCh indicates the sysUpTime
at the time of the last modification of tmnxPortATMVpShaperTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.11.2 |
tmnxPortATMVpShaperTableThe tmnxPortATMVpShaperTable has an entry for each ATM port-level VP
shaper configured on this system. SEQUENCE OF TmnxPortATMVpShaperEntry .1.3.6.1.4.1.6527.3.1.2.2.11.3 |
tmnxPortATMVpShaperEntryEach row represents a particular ATM port-level VP shaper.
Entries are created and deleted by the user. TmnxPortATMVpShaperEntry .1.3.6.1.4.1.6527.3.1.2.2.11.3.1 |
tmnxPortATMVpShaperVpiThe value of tmnxPortATMVpShaperVpi specifies the ATM Virtual Path
identifier of this row. AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.2.11.3.1.1 |
tmnxPortATMVpShaperRowStatusThe value of sapAtmVcRangeRowStatus specifies the row status of this
row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.11.3.1.2 |
tmnxPortATMVpShaperLastMgmtChThe value of tmnxPortATMVpShaperLastMgmtCh indicates the sysUpTime
at the time of the most recent management-initiated change to this
table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.2.11.3.1.3 |
tmnxPortATMVpShaperEgrAtdThe value of tmnxPortATMVpShaperEgrAtd specifies
the index of the ATM traffic descriptor in the ATM traffic
data encapsulation used for the egress direction over
the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol Encapsulation over
ATM AAL5 and to the ATM Forum LAN Emulation specification.
The value of tmnxPortATMVpShaperEgrAtd must be specified when the
conceptual row is created, and it cannot be changed afterwards.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.6527.3.1.2.2.11.3.1.4 |
tmnxPortStatsObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.2.12 |
tmnxPortNetIngressStatsTableDefines the Alcatel-Lucent SROS series network port ingress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network ingress
traffic. SEQUENCE OF TmnxPortNetIngressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.1 |
tmnxPortNetIngressStatsEntryDefines an entry in tmnxPortNetIngressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port. TmnxPortNetIngressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.1.1 |
tmnxPortNetIngressQueueIndextmnxPortNetIngressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network ingress queue for the specified port in the
managed system. TQueueId .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.1 |
tmnxPortNetIngressFwdInProfPktstmnxPortNetIngressFwdInProfPkts indicates the number of conforming
network ingress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.2 |
tmnxPortNetIngressFwdOutProfPktstmnxPortNetIngressFwdOutProfPkts indicates the number of exceeding
network ingress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.3 |
tmnxPortNetIngressFwdInProfOctstmnxPortNetIngressFwdInProfOcts indicates the number of conforming
network ingress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.4 |
tmnxPortNetIngressFwdOutProfOctstmnxPortNetIngressFwdOutProfOcts indicates the number of exceeding
network ingress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.5 |
tmnxPortNetIngressDroInProfPktstmnxPortNetIngressDroInProfPkts indicates the number of conforming
network ingress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.6 |
tmnxPortNetIngressDroOutProfPktstmnxPortNetIngressDroOutProfPkts indicates the number of exceeding
network ingress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.7 |
tmnxPortNetIngressDroInProfOctstmnxPortNetIngressDroInProfOcts indicates the number of conforming
network ingress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.8 |
tmnxPortNetIngressDroOutProfOctstmnxPortNetIngressDroOutProfOcts indicates the number of exceeding
network ingress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.1.1.9 |
tmnxPortNetEgressStatsTableDefines the Alcatel-Lucent SROS series network port egress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the physical queues
being used for the ports to forward the network egress
traffic. SEQUENCE OF TmnxPortNetEgressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.2 |
tmnxPortNetEgressStatsEntryDefines an entry in tmnxPortNetEgressStatsTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port. TmnxPortNetEgressStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.2.1 |
tmnxPortNetEgressQueueIndextmnxPortNetEgressQueueIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxPortPortID, it uniquely
identifies a network egress queue for the specified port in the
managed system. TQueueId .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.1 |
tmnxPortNetEgressFwdInProfPktstmnxPortNetEgressFwdInProfPkts indicates the number of conforming
network egress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.2 |
tmnxPortNetEgressFwdOutProfPktstmnxPortNetEgressFwdOutProfPkts indicates the number of exceeding
network egress packets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.3 |
tmnxPortNetEgressFwdInProfOctstmnxPortNetEgressFwdInProfOcts indicates the number of conforming
network egress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.4 |
tmnxPortNetEgressFwdOutProfOctstmnxPortNetEgressFwdOutProfOcts indicates the number of exceeding
network egress octets forwarded on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.5 |
tmnxPortNetEgressDroInProfPktstmnxPortNetEgressDroInProfPkts indicates the number of conforming
network egress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.6 |
tmnxPortNetEgressDroOutProfPktstmnxPortNetEgressDroOutProfPkts indicates the number of exceeding
network egress packets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.7 |
tmnxPortNetEgressDroInProfOctstmnxPortNetEgressDroInProfOcts indicates the number of conforming
network egress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.8 |
tmnxPortNetEgressDroOutProfOctstmnxPortNetEgressDroOutProfOcts indicates the number of exceeding
network egress octets dropped on this port using this queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.2.1.9 |
tmnxCiscoHDLCStatsTableThe tmnxCiscoHDLCStatsTable has an entry for each port in the
system that is configured for Cisco HDLC encapsulation. It contains
Cisco HDLC protocol statistics for the particular port. SEQUENCE OF TmnxCiscoHDLCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.3 |
tmnxCiscoHDLCStatsEntryAn entry in the tmnxCiscoHDLCStatsTable. TmnxCiscoHDLCStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.3.1 |
tmnxCiscoHDLCDiscardStatInPktstmnxCiscoHDLCDiscardStatInPkts indicates the number of
inbound Cisco HDLC packets discarded.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.1 |
tmnxCiscoHDLCDiscardStatOutPktstmnxCiscoHDLCDiscardStatOutPkts indicates the number of
outbound Cisco HDLC packets discarded.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.2 |
tmnxCiscoHDLCStatInPktstmnxCiscoHDLCStatInPkts indicates the number of inbound Cisco
HDLC packets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.3 |
tmnxCiscoHDLCStatOutPktstmnxCiscoHDLCStatOutPkts indicates the number of outbound Cisco
HDLC packets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.4 |
tmnxCiscoHDLCStatInOctetstmnxCiscoHDLCStatInOctets indicates the number of inbound Cisco
HDLC octets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.5 |
tmnxCiscoHDLCStatOutOctetstmnxCiscoHDLCStatOutOctets indicates the number of outbound
Cisco HDLC octets.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.2.12.3.1.6 |
tmnxMcMlpppStatsTableDefines the Alcatel-Lucent SROS series Multiclass MLPPP
statistics table for providing the capability of
retrieving the traffic statistics for the physical queues
being used for a class of a multiclass MLPPP bundle to
forward the traffic. SEQUENCE OF TmnxMcMlpppStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.4 |
tmnxMcMlpppStatsEntryDefines an entry in tmnxMcMlpppStatsTable. Entries are
created and deleted by the system depending on the number of
classes being used by a given MLPPP bundle. TmnxMcMlpppStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.4.1 |
tmnxMcMlpppClassIndextmnxMcMlpppClassIndex serves as the tertiary index. When used
in conjunction with tmnxChassisIndex and tmnxBundleBundleID, it
uniquely identifies a class of a multiclass MLPPP bundle in the
managed system. TmnxMcMlpppClassIndex .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.1 |
tmnxMcMlpppStatsIngressOctThe value of tmnxMcMlpppStatsIngressOct indicates the total
number of octets in all packets received on the bundle
for the given class on ingress before reassembly.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.2 |
tmnxMcMlpppStatsIngressPktThe value of tmnxMcMlpppStatsIngressPkt indicates the total
number of packets forwarded on the bundle for the given
class on ingress towards higher layer protocols.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.3 |
tmnxMcMlpppStatsIngressErrPktThe value of tmnxMcMlpppStatsIngressErrPkt indicates the total
number of packets discarded due to reassembly errors
on the bundle for the given class on ingress.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.4 |
tmnxMcMlpppStatsEgressOctThe value of tmnxMcMlpppStatsEgressOct indicates the total
number of octets in all packets received on the bundle
for the given class on egress before segmentation.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.5 |
tmnxMcMlpppStatsEgressPktThe value of tmnxMcMlpppStatsEgressPkt indicates the total
number of packets forwarded on the bundle for the given
class on egress towards the line.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.6 |
tmnxMcMlpppStatsEgressErrPktThe value of tmnxMcMlpppStatsEgressErrPkt indicates the total
number of packets discarded due to segmentation errors
on the bundle for the given class on egress.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.4.1.7 |
tmnxPortNetEgrQStatTableDefines the Alcatel-Lucent SROS series network port egress
statistics table for providing, via SNMP, the capability of
retrieving the traffic statistics for the queue-group queues
being used for the ports to forward the network egress
traffic. SEQUENCE OF TmnxPortNetEgrQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.12.5 |
tmnxPortNetEgrQStatEntryDefines an entry in tmnxPortNetEgrQStatTable. Entries are
created and deleted by the system depending on the queue policy
being used at the specific port.
In release 10.0 tPortNetEgrQGrpInstanceId is added as another index
before tmnxPortEgrQosQStatQueueId for this tmnxPortNetEgrQStatTable. TmnxPortNetEgrQStatEntry .1.3.6.1.4.1.6527.3.1.2.2.12.5.1 |
tmnxPortNetEgrQFwdInProfPktsThe value of tmnxPortNetEgrQFwdInProfPkts indicates the number of
conforming network egress packets forwarded on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.1 |
tmnxPortNetEgrQFwdOutProfPktsThe value of tmnxPortNetEgrQFwdOutProfPkts indicates the number of
exceeding network egress packets forwarded on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.2 |
tmnxPortNetEgrQFwdInProfOctsThe value of tmnxPortNetEgrQFwdInProfOcts indicates the number of
conforming network egress octets forwarded on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.3 |
tmnxPortNetEgrQFwdOutProfOctsThe value of tmnxPortNetEgrQFwdOutProfOcts indicates the number of
exceeding network egress octets forwarded on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.4 |
tmnxPortNetEgrQDroInProfPktsThe value of tmnxPortNetEgrQDroInProfPkts indicates the number of
conforming network egress packets dropped on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.5 |
tmnxPortNetEgrQDroOutProfPktsThe value of tmnxPortNetEgrQDroOutProfPkts indicates the number of
exceeding network egress packets dropped on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.6 |
tmnxPortNetEgrQDroInProfOctsThe value of tmnxPortNetEgrQDroInProfOcts indicates the number of
conforming network egress octets dropped on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.7 |
tmnxPortNetEgrQDroOutProfOctsThe value of tmnxPortNetEgrQDroOutProfOcts indicates the number of
exceeding network egress octets dropped on this port using this
queue-group queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.5.1.8 |
tmnxPortCemStatsTableA table that contains CEM Port statistics. SEQUENCE OF TmnxPortCemStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.6 |
tmnxPortCemStatsEntryStatistics for a specific CEM Port. TmnxPortCemStatsEntry .1.3.6.1.4.1.6527.3.1.2.2.12.6.1 |
tmnxPortCemStatsReportAlarmThe value of tmnxPortCemStatsReportAlarm indicates the type of
Circuit EMulation (CEM) alarm currently active on the port. The
syntax of this object mirrors that of the CemSapReportAlarm
TEXTUAL-CONVENTION. The values may be one of:
strayPkts (1)- receiving stray packets.
malformedPkts (2)- detecting malformed packets.
pktLoss (3)- experiencing packet loss.
bfrOverrun (4)- experiencing jitter buffer overrun.
bfrUnderrun (5)- experiencing jitter buffer underrun.
rmtPktLoss (6)- remote packet loss indication.
rmtFault (7)- remote TDM fault indication.
rmtRdi (8)- remote RDI indication.ro Bits .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.1 |
tmnxPortCemStatsIgrForwardedPktsThe value of tmnxPortCemStatsIgrForwardedPkts indicates
the number of packets that were successfully forwarded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.2 |
tmnxPortCemStatsIgrDroppedPktsThe value of tmnxPortCemStatsIgrDroppedPkts indicates
the total number of packets that were dropped due to errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.3 |
tmnxPortCemStatsEgrForwardedPktsThe value of tmnxPortCemStatsEgrForwardedPkts indicates the
number of packets that were successfully forwarded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.4 |
tmnxPortCemStatsEgrDroppedPktsThe value of tmnxPortCemStatsEgrDroppedPkts indicates
the total number of packets that were dropped due to errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.5 |
tmnxPortCemStatsEgrMissingPktsThe value of tmnxPortCemStatsEgrMissingPkts indicates the number of
missing packets (as detected via control word sequence number gaps).ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.6 |
tmnxPortCemStatsEgrPktsReOrderThe value of tmnxPortCemStatsEgrPktsReOrder indicates the
number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.7 |
tmnxPortCemStatsEgrJtrBfrURunThe value of tmnxPortCemStatsEgrJtrBfrURun indicates
the number of times a packet needed to be played out and
the jitter buffer was empty.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.8 |
tmnxPortCemStatsEgrJtrBfrORunThe value of tmnxPortCemStatsEgrJtrBfrORun indicates
the number of times a packet was dropped because it could
not fit in the jitter buffer.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.9 |
tmnxPortCemStatsEgrMisOrderDropThe value of tmnxPortCemStatsEgrMisOrderDrop indicates
the number of packets detected out of order (via control
word sequence numbers), and could not be re-ordered, or
could not be placed in the jitter buffer because it was
out of the current window.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.10 |
tmnxPortCemStatsEgrMalformedPktsThe value of tmnxPortCemStatsEgrMalformedPkts indicates the
number of packets detected with unexpected size, or bad
headers' stack.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.11 |
tmnxPortCemStatsEgrLBitDropThe value of tmnxPortCemStatsEgrLBitDrop indicates the
number of packets dropped due to the L bit set by the far end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.12 |
tmnxPortCemStatsEgrMultipleDropThe value of tmnxPortCemStatsEgrMultipleDrop indicates
the number of packets dropped due to multiple sequence numbers.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.13 |
tmnxPortCemStatsEgrESsThe value of tmnxPortCemStatsEgrESs indicates the number of
Error Seconds (ESs) encountered. Any malformed packet,
seq. error, LOPS and similar are considered as error seconds.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.14 |
tmnxPortCemStatsEgrSESsThe value of tmnxPortCemStatsEgrSESs indicates the number
of Severely Error Seconds (SESs) encountered. This is
when more than 30 percent of the packets within a one
second window are missing.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.15 |
tmnxPortCemStatsEgrUASsThe value of tmnxPortCemStatsEgrUASs indicates the number of
Unavailable Seconds (UASs) encountered. Any consecutive
ten seconds of SESs are counted as one UAS.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.16 |
tmnxPortCemStatsEgrFailureCountsThe value of tmnxPortCemStatsEgrFailureCounts indicates
the number failure events. A failure event begins when
the LOPS failure is declared, and ends when the failure
is cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.17 |
tmnxPortCemStatsEgrURunCountsThe value of tmnxPortCemStatsEgrURunCounts indicates
the number of times the jitter buffer went into an
underrun state.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.18 |
tmnxPortCemStatsEgrORunCountsThe value of tmnxPortCemStatsEgrORunCounts indicates
the number of times the jitter buffer went into an
overrun state.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.19 |
tmnxPortCemStatsEgrJtrBfrDepthThe value of tmnxPortCemStatsEgrJtrBfrDepth indicates
the current packet depth of the jitter buffer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.2.12.6.1.20 |
tPortNetEgrQGrpPStatTableThe value of tPortNetEgrQGrpPStatTable contains port egress
queue group policer statistics on network side. SEQUENCE OF TPortNetEgrQGrpPStatEntry .1.3.6.1.4.1.6527.3.1.2.2.12.7 |
tPortNetEgrQGrpPStatEntryThe value of tPortNetEgrQGrpPStatEntry defines an entry in the
tPortNetEgrQGrpPStatTable. It represents statistics about a
specific QoS egress queue group policer on the specified port. TPortNetEgrQGrpPStatEntry .1.3.6.1.4.1.6527.3.1.2.2.12.7.1 |
tPortNetEgrQGrpPStatQosPolicerIdThe value of tPortNetEgrQGrpPStatQosPolicerId specifies the index of the
egress QoS policer queue group on network port. TEgrPolicerId .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.1 |
tPortNetEgrQGrpPStatModeThe value of tPortNetEgrQGrpPStatMode indicates the stat mode used by
this policer.ro TmnxEgrPolicerStatMode .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.2 |
tPortNetEgrQGrpPStOffInProfPktThe value of tPortNetEgrQGrpPStOffInProfPkt indicates the number of
in-profile packets (rate below CIR) offered by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.3 |
tPortNetEgrQGrpPStOffInProfPktLThe value of tPortNetEgrQGrpPStOffInProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStOffInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.4 |
tPortNetEgrQGrpPStOffInProfPktHThe value of tPortNetEgrQGrpPStOffInProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStOffInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.5 |
tPortNetEgrQGrpPStFwdInProfPktThe value of tPortNetEgrQGrpPStFwdInProfPkt indicates the number of
in-profile packets (rate below CIR) forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.6 |
tPortNetEgrQGrpPStFwdInProfPktLThe value of tPortNetEgrQGrpPStFwdInProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStFwdInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.7 |
tPortNetEgrQGrpPStFwdInProfPktHThe value of tPortNetEgrQGrpPStFwdInProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStFwdInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.8 |
tPortNetEgrQGrpPStDrpInProfPktThe value of tPortNetEgrQGrpPStDrpInProfPkt indicates the number of
in-profile packets discarded by the egress Pchip due to: MBS exceeded,
buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.9 |
tPortNetEgrQGrpPStDrpInProfPktLThe value of tPortNetEgrQGrpPStDrpInProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStDrpInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.10 |
tPortNetEgrQGrpPStDrpInProfPktHThe value of tPortNetEgrQGrpPStDrpInProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStDrpInProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.11 |
tPortNetEgrQGrpPStOffOutProfPktThe value of tPortNetEgrQGrpPStOffOutProfPkt indicates the number of
out-of-profile packets (rate above CIR) offered by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.12 |
tPortNetEgrQGrpPStOffOutProfPktLThe value of tPortNetEgrQGrpPStOffOutProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStOffOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.13 |
tPortNetEgrQGrpPStOffOutProfPktHThe value of tPortNetEgrQGrpPStOffOutProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStOffOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.14 |
tPortNetEgrQGrpPStFwdOutProfPktThe value of tPortNetEgrQGrpPStFwdOutProfPkt indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.15 |
tPortNetEgrQGrpPStFwdOutProfPktLThe value of tPortNetEgrQGrpPStFwdOutProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStFwdOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.16 |
tPortNetEgrQGrpPStFwdOutProfPktHThe value of tPortNetEgrQGrpPStFwdOutProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStFwdOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.17 |
tPortNetEgrQGrpPStDrpOutProfPktThe value of tPortNetEgrQGrpPStDrpOutProfPkt indicates the number of
out-of-profile packets discarded by the egress Pchip due to: MBS
exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.18 |
tPortNetEgrQGrpPStDrpOutProfPktLThe value of tPortNetEgrQGrpPStDrpOutProfPktL indicates the lower 32
bits of tPortNetEgrQGrpPStDrpOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.19 |
tPortNetEgrQGrpPStDrpOutProfPktHThe value of tPortNetEgrQGrpPStDrpOutProfPktH indicates the upper 32
bits of tPortNetEgrQGrpPStDrpOutProfPkt.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.20 |
tPortNetEgrQGrpPStOffInProfOctThe value of tPortNetEgrQGrpPStOffInProfOct indicates the number of
in-profile octets (rate below CIR) offered by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.21 |
tPortNetEgrQGrpPStOffInProfOctLThe value of tPortNetEgrQGrpPStOffInProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStOffInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.22 |
tPortNetEgrQGrpPStOffInProfOctHThe value of tPortNetEgrQGrpPStOffInProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStOffInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.23 |
tPortNetEgrQGrpPStFwdInProfOctThe value of tPortNetEgrQGrpPStFwdInProfOct indicates the number of
in-profile octets (rate below CIR) forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.24 |
tPortNetEgrQGrpPStFwdInProfOctLThe value of tPortNetEgrQGrpPStFwdInProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStFwdInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.25 |
tPortNetEgrQGrpPStFwdInProfOctHThe value of tPortNetEgrQGrpPStFwdInProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStFwdInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.26 |
tPortNetEgrQGrpPStDrpInProfOctThe value of tPortNetEgrQGrpPStDrpInProfOct indicates the number of
in-profile octets discarded by the egress Pchip due to: MBS exceeded,
buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.27 |
tPortNetEgrQGrpPStDrpInProfOctLThe value of tPortNetEgrQGrpPStDrpInProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStDrpInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.28 |
tPortNetEgrQGrpPStDrpInProfOctHThe value of tPortNetEgrQGrpPStDrpInProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStDrpInProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.29 |
tPortNetEgrQGrpPStOffOutProfOctThe value of tPortNetEgrQGrpPStOffOutProfOct indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.30 |
tPortNetEgrQGrpPStOffOutProfOctLThe value of tPortNetEgrQGrpPStOffOutProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStOffOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.31 |
tPortNetEgrQGrpPStOffOutProfOctHThe value of tPortNetEgrQGrpPStOffOutProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStOffOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.32 |
tPortNetEgrQGrpPStFwdOutProfOctThe value of tPortNetEgrQGrpPStFwdOutProfOct indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.33 |
tPortNetEgrQGrpPStFwdOutProfOctLThe value of tPortNetEgrQGrpPStFwdOutProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStFwdOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.34 |
tPortNetEgrQGrpPStFwdOutProfOctHThe value of tPortNetEgrQGrpPStFwdOutProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStFwdOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.35 |
tPortNetEgrQGrpPStDrpOutProfOctThe value of tPortNetEgrQGrpPStDrpOutProfOct indicates the number of
out-of-profile octets discarded by the egress Pchip due to: MBS
exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.36 |
tPortNetEgrQGrpPStDrpOutProfOctLThe value of tPortNetEgrQGrpPStDrpOutProfOctL indicates the lower 32
bits of tPortNetEgrQGrpPStDrpOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.37 |
tPortNetEgrQGrpPStDrpOutProfOctHThe value of tPortNetEgrQGrpPStDrpOutProfOctH indicates the upper 32
bits of tPortNetEgrQGrpPStDrpOutProfOct.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.38 |
tPortNetEgrQGrpPStUncolPktOffThe value of tPortNetEgrQGrpPStUncolPktOff indicates the number of
uncolored packets forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.39 |
tPortNetEgrQGrpPStUncolPktOffLThe value of tPortNetEgrQGrpPStUncolPktOffL indicates the lower 32
bits of tPortNetEgrQGrpPStUncolPktOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.40 |
tPortNetEgrQGrpPStUncolPktOffHThe value of tPortNetEgrQGrpPStUncolPktOffH indicates the upper 32
bits of tPortNetEgrQGrpPStUncolPktOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.41 |
tPortNetEgrQGrpPStUncolOctOffThe value of tPortNetEgrQGrpPStUncolOctOff indicates the number of
uncolored octets forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.42 |
tPortNetEgrQGrpPStUncolOctOffLThe value of tPortNetEgrQGrpPStUncolOctOffL indicates the lower 32
bits of tPortNetEgrQGrpPStUncolOctOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.43 |
tPortNetEgrQGrpPStUncolOctOffHThe value of tPortNetEgrQGrpPStUncolOctOffH indicates the upper 32
bits of tPortNetEgrQGrpPStUncolOctOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.2.12.7.1.44 |
tmnxPortNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.2.2 |
tmnxPortNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.2.2.0 |