TIMETRA-SAP-MIB
AI MIB Summary
The TIMETRA-SAP-MIB provides SNMP access to configure and monitor Service Access Point (SAP) instances, including port bindings, VLAN tagging, and traffic statistics, on Alcatel-Lucent (now Nokia) SR OS routers. It enables granular management of Layer 2 service endpoints and associated performance counters for service provisioning and fault isolation within the SROS platform.
This document is the SNMP MIB module to manage and provision the various services of the Alcatel-Lucent SROS system.
Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraSvcSapMIBModule.1.3.6.1.4.1.6527.1.1.3.55
1649
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
1649 total| Object Name |
|---|
timetraSvcSapMIBModuleThis document is the SNMP MIB module to manage and provision
the various services of the Alcatel-Lucent SROS system.
Copyright 2003-2013 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.55 |
tmnxSapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.4.3 |
tmnxSapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.4.3.1 |
tmnxSapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.4.3.2 |
tmnxSapObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.4.3 |
sapNumEntriesThe current number of SAPs configured in this
device.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.1 |
sapBaseInfoTableA table that contains basic SAP information. SEQUENCE OF SapBaseInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.2 |
sapBaseInfoEntryInformation about a specific SAP. SapBaseInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.2.1 |
sapPortIdThe ID of the access port where this SAP
is defined.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.1 |
sapEncapValueThe value of the label used to identify this
SAP on the access port specified by sapPortId.ro TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.2 |
sapRowStatusThis object indicates the status of this row. The
only values supported during a set operation are
'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.3 |
sapTypeThis object indicates the type of service where
this SAP is defined.ro ServType (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.4 |
sapDescriptionGeneric information about this SAP.rw ServObjDesc (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.5 |
sapAdminStatusThe desired state of this SAP.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.6 |
sapOperStatusThe value of the object sapOperStatus indicates the
operating state of this SAP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.7 |
sapIngressQosPolicyIdThe value of the object sapIngressQosPolicyId specifies
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAPs that
cannot have a QoS policy assigned.rw TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.8 |
sapIngressMacFilterIdThe value of the object sapIngressMacFilterId specifies
the row index in the tMacFilterTable corresponding to this
ingress filter, or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.9 |
sapIngressIpFilterIdThe value of the object sapIngressIpFilterId specifies the
row index in the tIPFilterTable corresponding to this
ingress filter, or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.10 |
sapEgressQosPolicyIdThe row index in the tSapEgressTable
corresponding to this egress QoS policy,
or one if no policy is specified.rw TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.11 |
sapEgressMacFilterIdThe row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.12 |
sapEgressIpFilterIdThe row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.13 |
sapMirrorStatusThis object specifies whether traffic
mirroring has been enabled on this SAP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.14 |
sapIesIfIndexWhen the value of sapType is 'ies' this
object specifies the index of the IES interface
where this SAP is defined. The value of this object
can be set only when the row is created and cannot
be changed while the row status is 'active'. This
object is otherwise not significant and should have
the value zero.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.15 |
sapLastMgmtChangeThe value of sysUpTime at the time of the
most recent management-initiated change to
this SAP.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.16 |
sapCollectAcctStatsWhen the value of this object is 'true' the agent
collects accounting statistics on this SAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.17 |
sapAccountingPolicyIdThis object specifies the policy to use to collect
accounting statistics on this SAP. The value zero
indicates that the agent should use the default
accounting policy, if one exists.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.18 |
sapVpnIdThe VPN ID of the associated service.ro VpnId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.19 |
sapCustIdThe Customer ID of the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.20 |
sapCustMultSvcSiteThe value of this object, when not null, indicates
the Multi-Service Site this SAP is a member of. This
information is used to configure the ingress and
egress QoS schedulers for this SAP.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.21 |
sapIngressQosSchedulerPolicyThis object can be set only when sapCustMultSvcSite
is null. It indicates the ingress QoS scheduler for
this SAP.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.22 |
sapEgressQosSchedulerPolicyThis object can be set only when sapCustMultSvcSite
is null. It indicates the egress QoS scheduler for
this SAP.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.23 |
sapSplitHorizonGrpThis object specifies the name of the split-horizon
group where the SAP belongs to. This object can be
set only at the time the row is created. Per default
a SAP does not belong to any split-horizon group. The
name specified must correspond to an existing split-
horizon group in the TLS service where this SAP is
defined.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.24 |
sapIngressSharedQueuePolicyThis object indicates the ingress shared queue policy
used by this SAP. When the value of this object is null
it means that the SAP will use individual ingress QoS
queues, instead of the shared ones.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.25 |
sapIngressMatchQinQDot1PBitsThis object applies only to SAP's defined on a port
configured for qinq service encapsulation. It indicates
which 802.1P bits will be used to match a QoS or a MAC
filter policy when a double-tagged frame is received on
this SAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.26 |
sapOperFlagsThis object specifies all the conditions that
affect the operating status of this SAP.
The bit values are:
sapAdminDown (0) - SAP is admin down.
svcAdminDown (1) - Service is admin down.
iesIfAdminDown (2) - IP interface is admin down (IES and
VPRN only).
portOperDown (3) - Access port is oper down.
portMtuTooSmall (4) - Access port's MTU is < Service MTU
l2OperDown (5) - L2 PVC/PVP is oper down (FR and ATM
only).
ingressQosMismatch (6) - Mismatch between ingress QoS and
Scheduler policies.
egressQosMismatch (7) - Mismatch between egress QoS and
Scheduler policies.
relearnLimitExceeded (8) - MAC relearn limit was exceeded (TLS
only).
recProtSrcMac (9) - Received a packet with a protected
source MAC (TLS only).
subIfAdminDown (10) - Subscriber interface is admin down
(group-interface SAP only).
sapIpipeNoCeIpAddr (11) - CE IP Address not configured for Ipipe
SAP (IPIPE SAP only).
sapTodResourceUnavail (12) - SAP with ToD had insufficient
resources at boot time and got default
policies.
sapTodMssResourceUnavail (13)
- MSS of this SAP uses ToD and due to
insufficient resources at boot time
got default scheduler policies.
sapParamMismatch (14) - Service specific local parameter
mismatch.
sapCemNoEcidOrMacAddr (15) - ECID or MAC address not configured
(CEM SAP only).
sapStandbyForMcRing (16) - mc-ring keeps this SAP standby for the
corresponding SAP on peer.
sapSvcMtuTooSmall (17) - Service MTU is < SAP payload.
ingressNamedPoolMismatch (18)
- Invalid named-pool on the ingress
side.
egressNamedPoolMismatch (19)
- Invalid named-pool on the egress side.
ipMirrorNoMacAddr (20) - No MAC Address configured for the
ip-mirror.
sapEpipeNoRingNode (21) - No TIMETRA-MC-REDUNDANCY-MIB
::tmnxMcEpipeSapEntry object
configured for Epipe SAP (EPIPE SAP
only).
mcStandby (22) - indicates the SAP is standby because
of a mutli-chassis protocol.
mhStandby (23) - indicates the SAP is standby because
of a BGP multi-home protocol.
oamDownMepFault (24) - ETH-CFM down MEP fault detected.
oamUpMepFault (25) - ETH-CFM up MEP fault detected.
ethTunTagMisconfig (26) - Missing Eth-tunnel SAP tag(s).
ingressPolicerMismatch (27)- indicate ingress policer
- is parented to non-existent arbiter
egressPolicerMismatch (28) - indicate egress policer
- is parented to non-existent arbiter.
sapTlsNoRingNode (29) - No TIMETRA-MC-REDUNDANCY-MIB
::tmnxMcTlsSapEntry object
configured for TLS SAP (VPLS SAP
only).
ethRingPathBlocked (30) - indicates eth-ring path is
blocked.
oamTunnelMepFault (31) - ETH-CFM Tunnel MEP fault detected.
operGrpDown (32) - indicates operational-group is down.ro Bits .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.27 |
sapLastStatusChangeThe value of sysUpTime at the time of the
most recent operating status change to this
SAP.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.28 |
sapAntiSpoofingThe value of the object sapAntiSpoofing specifies
the type of anti-spoof filtering applicable on this SAP.
'nextHopIpAndMacAddr (4)' is not supported on SR-1, where
the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.29 |
sapIngressIpv6FilterIdThe value of the object sapIngressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this ingress ipv6 filter, or zero if no ipv6 filter is
specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.30 |
sapEgressIpv6FilterIdThe value of the object sapEgressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this egress ipv6 filter, or zero if no ipv6 filter is
specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.31 |
sapTodSuiteThe value of the object sapTodSuite specifies the Time of
Day (ToD) suite to be applied on this SAP.
An empty string indicates that no ToD suite is applied
on this SAP.
A set request will only be allowed, if the indicated suite
is defined in TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.32 |
sapIngUseMultipointSharedWhen the value of sapIngressSharedQueuePolicy is not null,
the value of the object sapIngUseMultipointShared
specifies whether this SAP uses the multipoint-shared
queues of the shared policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.33 |
sapEgressQinQMarkTopOnlyWhen the encapsulation type of the access port where
this SAP is defined is qinq, the value of the object
sapEgressQinQMarkTopOnly specifies which P-bits to mark
during packet egress. When the value is false both set
of P-bits are marked. When the value is true, only the
P-bits in the top Q-tag are marked.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.34 |
sapEgressAggRateLimitThe value of the object sapEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.35 |
sapEndPointThe value of the object sapEndPoint specifies the service
endpoint to which this SAP is attached. The svcId of the
SAP MUST match the svcId of the service endpoint.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.36 |
sapIngressVlanTranslationThe value of sapIngressVlanTranslation specifies the
desired Ingress Vlan Translation.
A value of 'vlanId' specifies that the value of
sapIngressVlanTranslationId is to be used to overwrite
the preserved VLAN id in the packet.
A value of 'copyOuter' specifies that the outer VLAN
id should be used to overwrite the preserved VLAN id in
the packet.
An 'inconsistentValue' error is returned when an attempt
is made to set the value of sapIngressVlanTranslation
to 'vlanId' and sapIngressVlanTranslationId is
set to '-1'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.37 |
sapIngressVlanTranslationIdThe value of sapIngressVlanTranslationId specifies the
VLAN id to be used to overwrite the preserved VLAN id
in the packet.
An 'inconsistentValue' error is returned when an
attempt is made to set the value of
sapIngressVlanTranslationId to other than '-1' and
sapIngressVlanTranslation is not set to 'vlanId'.rw Integer32 (-1|0..4094) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.38 |
sapSubTypeThe value of the object sapSubType indicates the
sub-type for this SAP.
A value of 'regular' indicates a standard SAP.
A value of 'capture' specifies a capturing SAP
in which triggering packets will be sent to the CPM.
Non-triggering packets captured by the 'capture' SAP
will be dropped.
A value of 'managed' indicates a managed SAP which
was created dynamically after receiving triggering
packets on a SAP with a sapSubType value of
'capture'. Entries with a value of 'managed'
are not user editable and are not maintained
in the configuration file.
A value of 'video' indicates a video SAP which
terminates on a video SAP. Entries with a value of
'video' are not user editable and are not maintained
in the configuration file.
A value of 'internal' indicates an internal SAP which
was created by the system. Entries with a value of
'internal' are not user editable and are not
maintained in the configuration file.
Whereas any of the five values may be returned in
in response to an SNMP GET request, only two values
may be specified in an SNMP SET request: 'regular'
and 'capture'. An attempt to specify a value
of 'managed', 'video' or 'internal' in an SNMP SET
request will fail with an error of 'inconsistentValue'.
The value of this object cannot be changed after creation.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.39 |
sapCpmProtPolicyIdThe value of sapCpmProtPolicyId associates a CPM Protection
policy with a SAP.
A value of zero (0) specifies that no CPM Protection policy
is associated with this SAP.
A value of 254 specifies that the default CPM Protection
policy is associated with this SAP.
If no value for sapCpmProtPolicyId is specified when the
sapBaseInfoEntry is created, the system assigns a default
value as follows: if the system creates a corresponding
entry in the sapSubMgmtInfoTable, the default value is
254; otherwise, the default value is 'zero'. This means
that all SAP's that support Enhanced Subscriber Management
get a default value of 254.
If a SAP would get a default value of 254, it is not
allowed to set the value of sapCpmProtPolicyId to 'zero'.
If a SAP would get a default value of 'zero', it is not
allowed to modify the value of sapCpmProtPolicyId.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and
7710, where the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.rw TCpmProtPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.40 |
sapCpmProtMonitorMacThe value of sapCpmProtMonitorMac specifies whether or not to apply the
tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to
packets served by the SAP, on a per source MAC address basis.
For example, suppose sapCpmProtMonitorMac is 'true', and this SAP's
sapCpmProtPolicyId points to a policy table row with
tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two
source MAC addresses each send 150 packets/second to this SAP. Approx.
50 packets/second from each source will be discarded.
If the value of sapCpmProtPolicyId is equal to zero, the value of
sapCpmProtMonitorMac is irrelevant and will be ignored.
At most one of the following options can be enabled on this SAP:
1. sapCpmProtMonitorMac,
2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
3. sapCpmProtMonitorIP.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and
7710, where the value of
TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.41 |
sapEgressFrameBasedAccountingThe value of sapEgressFrameBasedAccounting specifies
whether to use frame-based accounting when evaluating
sapEgressAggRateLimit for all egress queues for this SAP.
If the value is 'false', the default packet-based
accounting method will be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.42 |
sapIngressAggRateLimitThe value of the object sapIngressAggRateLimit
specifies the maximum total rate of all ingress queues for
this SAP. The value '-1' means that there
is no limit.
This object is obsoleted in 10.0 Release.rwobsolete TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.43 |
sapEgressHsmdaShaperOverrideThe value of the object sapEgressHsmdaShaperOverride
specifies the name of the secondary shaper for this SAP.
The value must correspond to an entry in the
tmnxPortEgrShaperTable. If the empty string is specified,
the default secondary shaper will be used.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.44 |
sapIngressHsmdaPacketOffOvrThe value of sapIngressHsmdaPacketOffOvr specifies the
value, in bytes, of the adjustment to make to the size of
each packet for HSMDA queue accounting on ingress.
This object is obsoleted in 10.0 Release.rwobsolete TIngHsmdaPerPacketOffsetOvr UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.45 |
sapEgressHsmdaPacketOffOverrideThe value of sapEgressHsmdaPacketOffOverride specifies the
value, in bytes, of the adjustment to make to the size of
each packet for HSMDA queue accounting on ingress.rw TEgrHsmdaPerPacketOffsetOvr UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.46 |
sapCallingStationIdThe value of sapCallingStationId specifies the
calling-station-id to be included in all RADIUS
authentication and accounting requests if configured
to be included in the corresponding RADIUS authentication
or accounting policy.
If the empty string is specified, no calling-station-id
will be included.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.47 |
sapIsaAaApplicationProfileThe value of sapIsaAaApplicationProfile specifies
the ISA-AA application profile for this sap. The
specified application profile needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.48 |
sapIngPolicerPolicyThe value of sapIngPolicerPolicy specifies the ingress
policer control policy applicable to this subscriber
profile.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.49 |
sapEgrPolicerPolicyThe value of sapEgrPolicerPolicy specifies the egress
policer control policy applicable to this subscriber
profile.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.50 |
sapTmplUsedThe value of sapTmplUsed indicates the name of the
sap-template used to create this sap.
A value of empty-string indicates that this sap was not
created using a sap-template.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.51 |
sapEthRingIndexThe value of sapEthRingIndex specifies the Ethernet Ring
associated with this SAP.
This object, if required, MUST be configured during the
row creation of the sapBaseInfoTable row, and MUST
reference an existing row in
TIMETRA-ETH-RING-MIB::tmnxEthRingConfigTable.
The value zero, the default value, specifies there is no
Ethernet Ring associated with this SAP.
This object can not be changed once set; the SAP MUST be
destroyed and re-created to change the sapEthRingIndex
object.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.52 |
sapIngressFlowspecThe value of sapIngressFlowspec specifies whether ingress Flowspec
is enabled for this sap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.53 |
sapCpmProtEthCfmMonitorFlagsThe value of sapCpmProtEthCfmMonitorFlags specifies whether or not to
apply rate limiting (using the tmnxCpmProtEthCfmPolTable configuration)
to Ethernet Connectivity Fault Management (Eth-CFM) packets served by
the SAP. Two associated options are also specified.
Five combinations of flag values are supported, as shown in the
following table.
Flag Value (0=Disabled, 1=Enabled)
- -
'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1
'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1
'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1
- -
Supported Combination? Y N N N Y Y Y Y
If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on
this SAP.
If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
this SAP. Excess packets are discarded. The configured information
used to perform the Eth-CFM rate limiting (e.g. the rate limit(s))
resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the SAP's
sapCpmProtPolicyId.
At most one of the following options can be enabled on this SAP:
1. sapCpmProtMonitorMac,
2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
3. sapCpmProtMonitorIP.
The flags 'ethCfmMonitorAggregate(1)' and
'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
rate limiting. Therefore, they are only significant if Eth-CFM rate
limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The
remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.
If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
(i.e. on a source MAC address basis). For example, if the SAP's rate
limit for all Eth-CFM packets is 100 packets/sec, and two peers are
served by the SAP, then 100 Eth-CFM packets/sec from each peer is
within the limit.
If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
aggregated traffic flow. For example, if the SAP's rate limit for all
Eth-CFM packets is 100 packets/sec, and two peers are served by this
SAP, then the combined rate of the two peers cannot exceed 100
packets/sec.
'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
between two features: Eth-CFM rate limiting, and overall rate limiting
(as configured using tmnxCpmProtPolOverallRateLimit).
If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
packet is subjected to two rate limits, in the following order.
a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
described above. If the packet exceeds the limit, it is discarded.
Otherwise...
b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied
to Eth-CFM packets, and the other rate limited packet types) is
applied.
If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
is subjected to one rate limit: the applicable
tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets
are neither counted nor discarded when performing the
tmnxCpmProtPolOverallRateLimit rate limiting.rw Bits .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.54 |
sapTransitIpPolicyIdThe value of sapTransitIpPolicyId specifies the transit IP
policy to be associated with this SAP. The value must either
be '0' indicating an invalid transit IP policy or the specified
transit IP policy needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxTransitIpPolicyTable.
At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can
be non-zero.rw TmnxBsxTransitIpPolicyIdOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.55 |
sapOperGrpThe value of the sapOperGrp specifies the
Operational-Group identifier associated with this SAP.
An 'inconsistentValue' error is returned when
both sapOperGrp and sapMonitorOperGrp are set together
and atleast one of them to a non-default value.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.56 |
sapMonitorOperGrpThe value of the sapMonitorOperGrp specifies the
Operational-Group identifier which will affect the state
of this SAP.
An 'inconsistentValue' error is returned when
both sapOperGrp and sapMonitorOperGrp are set together
and atleast one of them to a non-default value.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.57 |
sapEgressHsmdaWrrPolicyOvrThe value of the sapEgressHsmdaWrrPolicyOvr specifies the
egress hsmda weighted round-robin policy override for this
SAP. When no policy is given, the hsmda weighted
round-robin policy specified in the sap-egress policy is
honored. When a valid policy is given, it is used instead
of the hsmda weighted round-robin policy given in the
sap-egress policy.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.58 |
sapTransitPrefixPolicyIdThe value of sapTransitPrefixPolicyId specifies the transit prefix
policy to be associated with this SAP. The value must either
be '0' indicating an invalid transit prefix policy or the specified
transit prefix policy needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxTransPrefPolicyTable.
At most one of sapTransitIpPolicyId and sapTransitPrefixPolicyId can
be non-zero.rw TmnxBsxTransPrefPolicyIdOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.59 |
sapCpmProtMonitorIPThe value of sapCpmProtMonitorIP specifies whether or not to apply the
tmnxCpmProtPolPerSrcRateLimit of this SAP's CPM Protection policy to
IPv4 DHCP packets served by the SAP, on a per source IP address basis.
For example, suppose sapCpmProtMonitorIP is 'true', and this SAP's
sapCpmProtPolicyId points to a policy table row with
tmnxCpmProtPolPerSrcRateLimit set to 100 packets/second. Suppose two
source IP addresses (e.g. 138.120.141.173 and 138.120.141.174)
each send 150 DHCP packets/second to this SAP. Approx. 50 DCHP
packets/second from each source will be discarded.
If the value of sapCpmProtPolicyId is equal to zero, the value of
sapCpmProtMonitorIP is irrelevant and will be ignored.
At most one of the following options can be enabled on this SAP:
1. sapCpmProtMonitorMac,
2. The sapCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)',
3. sapCpmProtMonitorIP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.60 |
sapHostsAdminStateThe value of the object sapHostsAdminState
specifies the administrative state of all hosts on this SAP.
If set to 'down' no dynamic subscriber hosts can be created,
and any active dynamic host on the SAP will be removed.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.61 |
sapHostLockoutPolicyThe value of sapHostLockoutPolicy specifies the
Host Lockout Policy for this SAP.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.62 |
sapAarpIdThe value of sapAarpId specifies the AA Redundancy
Protocol (AARP) instance associated with this SAP.
If set to 0, no AARP instance is associated with
this SAP.rw TmnxBsxAarpIdOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.63 |
sapIngressFPQGrpThe value of sapIngressFPQGrp specifies the
forwarding-plane queue group Policy for this SAP.
This object must be set along with
sapIngressFPQGrpInstanceId object.
An 'inconsistentValue' error is returned if
sapIngressFPQGrp is set to a non-default value and an entry
corresponding to tmnxFPNum to which this SAP belongs does
not exist in tmnxFPAccIngQGrpTable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.64 |
sapIngressFPQGrpInstanceIdThe value of sapIngressFPQGrpInstanceId specifies the
instance of the forwarding-plane ingress Queue Group for
this SAP.
This object must be set along with sapIngressFPQGrp object.
An 'inconsistentValue' error is returned if
sapIngressFPQGrp is set to a non-default value and an entry
corresponding to tmnxFPNum to which this SAP belongs does
not exist in tmnxFPAccIngQGrpTable.rw TQosQGrpInstanceIDorZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.65 |
sapAarpServRefTypeThe value of sapAarpServRefType specifies the role of
the SAP referenced by the AA Redundancy Protocol (AARP)
instance identified by sapAarpId. If sapAarpId
is the invalid AARP instance '0', then the
service reference type is 'none(0)'.rw TmnxBsxAarpServiceRefType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.66 |
sapSiteNameThe value of sapSiteName indicates the site-name
associated with this SAP.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.67 |
sapIgnoreOperDownThe value of sapIgnoreOperDown specifiy whether service will ignore
when sap is operationally down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.2.1.68 |
sapTlsInfoTableA table that contains TLS SAP information. SEQUENCE OF SapTlsInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.3 |
sapTlsInfoEntryTLS specific information about a SAP. SapTlsInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.3.1 |
sapTlsStpAdminStatusThe value of the object sapTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol.
A SAP with a non-zero sapEthRingIndex does not participate
in the TLS's Spanning Tree Protocol. The default value for
sapTlsStpAdminStatus for these SAPs is 'disabled' and may
not be set to 'enabled'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.1 |
sapTlsStpPriorityThe value of the object sapTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP. As only the most significant 4
bits of the value are used, the actual value of this object
is limited to multiples of 16: e.g. the agent rounds down
the value to one of: 0, 16, 32, .. , 224, 240.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.2 |
sapTlsStpPortNumThe value of the object sapTlsStpPortNum specifies the
value of the port number field which is contained in the
least significant 12 bits of the 16-bit Port ID associated
with this SAP. Values in the range 2048..4094 are
automatically assigned by the agent when the SAP is
created or when the value of this object is set to zero
via management. Values in the range 1..2047 can be set
via management, to allow this object to have a
deterministic value across system reboots.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.3 |
sapTlsStpPathCostThe value of the object sapTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.4 |
sapTlsStpRapidStartThe value of the object sapTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on this SAP are driven by the value of the 'HelloTime'
instead of the value of 'ForwardDelay', thus allowing a
faster transition into the forwarding state. This
parameter is also referred to as 'adminEdge'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.5 |
sapTlsStpBpduEncapThe value of the object sapTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.6 |
sapTlsStpPortStateThe value of the object sapTlsStpPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge has
detected a port that is malfunctioning it will
place that port into the 'broken' state.ro TStpPortState (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.7 |
sapTlsStpDesignatedBridgeThe value of the object sapTlsStpDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment.ro BridgeId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.8 |
sapTlsStpDesignatedPortThe value of the object sapTlsStpDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.9 |
sapTlsStpForwardTransitionsThe value of the object sapTlsStpForwardTransitions
indicates the number of times this port has transitioned
from the Learning state to the Forwarding state.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.10 |
sapTlsStpInConfigBpdusThe value of the object sapTlsStpInConfigBpdus indicates
the number of Configuration BPDUs received on this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.11 |
sapTlsStpInTcnBpdusThe value of the object sapTlsStpInTcnBpdus indicates the
number of Topology Change Notification BPDUs received on
this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.12 |
sapTlsStpInBadBpdusThis object specifies the number of bad
BPDUs received on this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.13 |
sapTlsStpOutConfigBpdusThe value of the object sapTlsStpOutConfigBpdus indicates
the number of Configuration BPDUs sent out this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.14 |
sapTlsStpOutTcnBpdusThis object specifies the number of Topology
Change Notification BPDUs sent out this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.15 |
sapTlsStpOperBpduEncapThe value of the object sapTlsStpOperBpduEncap indicates
the operating encapsulation type used on BPDUs sent out
and received on this SAP.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.16 |
sapTlsVpnIdThe value of the object sapTlsVpnId indicates the VPN ID
of the associated service.ro VpnId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.17 |
sapTlsCustIdThe Customer ID of the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.18 |
sapTlsMacAddressLimitThe value of the object sapTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP.
The maximum value of sapTlsMacAddressLimit is '511999',
when the the value of
TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'd'.
The maximum value of sapTlsMacAddressLimit is '196607',
when the the value of
TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c'.
In other cases, the maximum value of
sapTlsMacAddressLimit is '131071'.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.19 |
sapTlsNumMacAddressesThe value of the object sapTlsNumMacAddresses indicates
the number of MAC addresses currently present in the FDB
that belong to this SAP (Both learned and static MAC
addresses are counted).ro Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.20 |
sapTlsNumStaticMacAddressesThe value of the object sapTlsNumStaticMacAddresses
indicates the number of static MAC addresses currently
present in the FDB that belong to this SAP.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.21 |
sapTlsMacLearningThe value of the object sapTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.22 |
sapTlsMacAgeingThe value of the object sapTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP. the value
is ignored if MAC aging is disabled on service level.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.23 |
sapTlsStpOperEdgeThe value of the object sapTlsStpOperEdge indicates the
operational value of the Edge Port parameter. The object
is initialized to the value of sapTlsStpRapidStart and is
set FALSE on reception of a BPDU.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.24 |
sapTlsStpAdminPointToPointThe value of the object sapTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sap. The value
'forceTrue' means that this port should always be
treated as if it is connected to a point-to-point link.
The value of 'forceFalse' means that this port should
be treated as having a shared media connection.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.25 |
sapTlsStpPortRolesapTlsStpPortRole indicates the current role of the
sap as defined by the Rapid Spanning Tree Protocol.ro StpPortRole (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.26 |
sapTlsStpAutoEdgesapTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.27 |
sapTlsStpOperProtocolsapTlsStpOperProtocol indicates whether stp, rstp or
mstp is running on this SAP. If the protocol is not
enabled on this SAP, the value notApplicable is
returned.ro StpProtocol (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.28 |
sapTlsStpInRstBpdusThe value of the object sapTlsStpInRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs received on
this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.29 |
sapTlsStpOutRstBpdusThe value of the object sapTlsStpOutRstBpdus indicates
the number of Rapid Spanning Tree (RST) BPDUs sent out on
this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.30 |
sapTlsLimitMacMoveWhen sapTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When
the value is 'nonBlockable' this SAP will not be
blocked, and another blockable SAP will be blocked
instead.rw TlsLimitMacMove (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.31 |
sapTlsDhcpSnoopingThe value of the object sapTlsDhcpSnooping specifies
whether or not DHCP packets received on this SAP will be
snooped. This object was made obsolete in the 3.0 release.rwobsolete TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.32 |
sapTlsMacPinningThe value of the object sapTlsMacPinning specifies whether
or not MAC address pinning is active on this SAP. The
value will be set by default to disabled. However for a
SAP that belongs to a residential SHG, the value is set to
enabled by the system, and cannot be altered by the
operator. Setting the value to enable disables
re-learning of MAC addresses on other SAPs or
spoke-SDPs within the same VPLS; the MAC address will
hence remain attached to the SAP for the duration of
its age-timer. This object has effect only for MAC
addresses learned via the normal MAC learning
process, and not for entries learned via DHCP.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.33 |
sapTlsDiscardUnknownSourcewith the object sapTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets with unknown source MAC address are
forwarded by default. By setting
sapTlsDiscardUnknownSource to enabled, packets with
unknown source MAC will be dropped in stead.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.34 |
sapTlsMvplsPruneStateThe value of sapTlsMvplsPruneState indicates the mVPLS
prune state of the SAP. The object will be set to
notApplicable if the SAP is not managed by a mVPLS. If
the SAP is managed the state reflects whether or not
the SAP is pruned by the STP instance running in the
mVPLS instance.ro MvplsPruneState (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.35 |
sapTlsMvplsMgmtServiceThe value of sapTlsMvplsMgmtService indicates the
service Id of the service where the STP instance is
running that is managing this SAP. This object is
only valid if sapTlsMvplsPruneState is different from
notApplicable.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.36 |
sapTlsMvplsMgmtPortIdThe value of sapTlsMvplsMgmtPortId indicates the SAP
port Id of the SAP in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP.
This object is only valid if sapTlsMvplsPruneState is
different from notApplicable.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.37 |
sapTlsMvplsMgmtEncapValueThe value of sapTlsMvplsMgmtEncapValue indicates the
SAP Encap value of the SAP in the mVPLS instance
specified in sapTlsMvplsMgmtService that is
controlling this SAP. This object is only valid if
sapTlsMvplsPruneState is different from notApplicable.ro TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.38 |
sapTlsArpReplyAgentThe value of the object sapTlsArpReplyAgent specifies
the status of the special ARP response mechanism in the
system for ARP requests destined to static or dynamic hosts
associated with this SAP.
disabled: the ARP reply function is not operational
enabled: the ARP reply function is enabled without
subscriber identification.
enabledWithSubscrIdent: the ARP reply function is enabled
with subscriber identification.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.39 |
sapTlsStpExceptionThe value of the object sapTlsStpException indicates
whether an STP exception condition is present on this
Sap.
- none : no exception condition found.
- oneWayCommuniation : The neighbor RSTP peer on this link
is not able to detect our presence.
- downstreamLoopDetected :A loop is detected on this link.ro StpExceptionCondition (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.40 |
sapTlsAuthenticationPolicyThe value of the object sapTlsAuthenticationPolicy specifies
which subscriber authentication policy must be applied when
a DHCP msg is received on the interface. The authentication
policies must be defined in tmnxSubAuthPlcyTable. The policy
will only be applied when sapTlsDhcpSnoop is enabled.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.41 |
sapTlsL2ptTerminationThe value of the object sapTlsL2ptTermination specifies
whether received Layer 2 Protocol Tunnel (L2PT) pdu's
are terminated on this port or sap.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.42 |
sapTlsBpduTranslationThe value of the object sapTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or sap.rw TlsBpduTranslation (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.43 |
sapTlsStpRootGuardThe value of the object sapTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connectivity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.44 |
sapTlsStpInsideRegionThe value of the object sapTlsStpInsideRegion indicates
whether the network connected to the SAP is in the same
MST region. It corresponds to the parameter 'infoInternal'
in 802.1Q.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.45 |
sapTlsEgressMcastGroupThe value of the object sapTlsEgressMcastGroup specifies
the Egress Multicast Group this SAP belongs to.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.46 |
sapTlsStpInMstBpdusThe value of the object sapTlsStpInMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs received
on this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.47 |
sapTlsStpOutMstBpdusThe value of the object sapTlsStpOutMstBpdus indicates
the number of Multiple Spanning Tree (MST) BPDUs sent out
on this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.48 |
sapTlsRestProtSrcMacThe value of the object sapTlsRestProtSrcMac specifies
how the agent will handle relearn requests for protected
MAC addresses. When the value of this object is 'true'
requests to relearn a protected MAC address will be
ignored.
In addition, if the value of sapTlsRestProtSrcMacAction
is 'disable', then the SAP where the protected source
MAC was seen will be brought operationally down.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.49 |
sapTlsRestUnprotDstMacThe value of the object sapTlsRestUnprotDstMac specifies
how the system will forward packets destined to an
unprotected MAC address. When the value of this object is
'true' packets destined to an unprotected MAC address
will be dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.50 |
sapTlsStpRxdDesigBridgeThe value of the object sapTlsStpRxdDesigBridge
indicates the designated Bridge Identifier in the last
BPDU which was received on this SAP. It identifies
which bridge is connected to the SAP.ro BridgeId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.51 |
sapTlsStpRootGuardViolationThe value of the object sapTlsStpRootGuardViolation
indicates whether there is a root-guard violation at the
present time. This can only happen when sapTlsStpRootGuard
is set to true.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.52 |
sapTlsShcvActionThe value of the object sapTlsShcvAction
indicates whether any action should be triggered when
the connectivity check fails.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.53 |
sapTlsShcvSrcIpThe value of the object sapTlsShcvSrcIp
specifies the source IP address used when doing the
connectivity check. The value 0.0.0.0 indicates that
no host IP address is specified.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.54 |
sapTlsShcvSrcMacThe value of the object sapTlsShcvSrcMac
specifies the MAC address used when doing the connectivity
check. The value 0:0:0:0:0:0 indicates that no host MAC
address is specified.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.55 |
sapTlsShcvIntervalThe value of the object sapTlsShcvInterval specifies
the interval in minutes between connectivity checks.
Zero means no connectivity checking.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.56 |
sapTlsMvplsMgmtMstiThe value of the object sapTlsMvplsMgmtMsti indicates the
MST-instance in the mVPLS instance specified in
sapTlsMvplsMgmtService that is controlling this SAP. A
value of 0 indicates the CIST.
This object is only valid if sapTlsMvplsPruneState is
different from notApplicable.ro MstiInstanceIdOrZero (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.57 |
sapTlsMacMoveNextUpTimeThe value of the object sapTlsMacMoveNextUpTime counts down
the time in seconds until a SAP that has been brought down
due to exceeding the TLS svcTlsMacMoveMaxRate, sapOperFlags
'relearnLimitExceeded', is automatically brought up again.
When this value is 0xffff, the SAP will never be
automatically brought up.
When sapOperStatus is 'up', this object counts down the
time in seconds until the value of
sapTlsMacMoveRateExcdLeft is reset.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.58 |
sapTlsMacMoveRateExcdLeftThe value of the object sapTlsMacMoveRateExcdLeft
counts down the number of times this SAP can exceed the
TLS svcTlsMacMoveMaxRate and still be automatically
brought up.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.59 |
sapTlsRestProtSrcMacActionThe value of the object sapTlsRestProtSrcMacAction
indicates the action to take whenever a relearn request
for a protected MAC is received on a restricted SAP.
When the value of this object is 'disable' the SAP
will be placed in the operational down state, with the
operating flag 'recProtSrcMac' set.
When the value of this object is 'alarm-only', the SAP
will be left up and only a notification,
sapReceivedProtSrcMac, will be generated.
When the value of this object is 'discardFrame', the
SAP will start discarding the frame in addition to
generating sapReceivedProtSrcMac notification.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.60 |
sapTlsL2ptForceBoundaryThe value of sapTlsL2ptForceBoundary specifies if
sapTlsL2ptTermination is enforced for its managed SAP's.
Setting the value of the object sapTlsL2ptForceBoundary of
a SAP in a Management VPLS to `true' forces all its
managed SAP's to have sapTlsL2ptTermination enabled. This
value can only be `true' if the SAP belongs to a
management VPLS.
If this SAP has managed SAP's already with
sapTlsL2ptTermination disabled, it is not allowed
to set sapTlsL2ptForceBoundary to `true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.61 |
sapTlsLimitMacMoveLevelThe value of the object sapTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)rw TlsLimitMacMoveLevel (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.62 |
sapTlsBpduTransOperThe value of the object sapTlsBpduTransOper indicates
the operational bpdu encapsulation used for BPDU
translated frames.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.63 |
sapTlsDefMsapPolicyThe value of sapTlsDefMsapPolicy specifies the
default Managed SAP policy to use to create
Managed SAPs when the response from the Radius
server does not specify a Managed SAP policy.
The value of sapTlsDefMsapPolicy is only valid for
a SAP with a sapSubType value of 'capture'.
If the value is set to a non-empty string for a
SAP with a sapSubType value other than 'capture',
an 'inconsistentValue' error will be returned.
The Managed SAP policy must be defined in
msapPlcyTable, otherwise an 'inconsistentValue'
error will be returned.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.64 |
sapTlsL2ptProtocolsThe value of the object sapTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or sap.rw L2ptProtocols (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.65 |
sapTlsL2ptForceProtocolsThe value of the object sapTlsL2ptForceProtocols specifies
which L2 Protocol Tunnel pdu's must be terminated by
SAP's managed by this SAP.
This object is only relevant if the value of the object
sapTlsL2ptForceBoundary is 'true'.
For every SAP managed by this SAP, each L2 protocol
specified by sapTlsL2ptForceProtocols must be terminated,
while other L2 protocols may or may not be terminated,
depending on the value of sapTlsL2ptProtocols of that
managed SAP.rw L2ptProtocols (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.66 |
sapTlsPppoeMsapTriggerThe value of sapTlsPppoeMsapTrigger specifies whether
the receipt of PPPoE trigger packets on a VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsPppoeMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.67 |
sapTlsDhcpMsapTriggerThe value of sapTlsDhcpMsapTrigger specifies whether
the receipt of DHCP trigger packets on this VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsDhcpMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.68 |
sapTlsMrpJoinTimeThe value of sapTlsMrpJoinTime specifies a timer value in
10ths of seconds which determines the maximum rate at
which attribute join messages can be sent on the SAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.69 |
sapTlsMrpLeaveTimeThe value of sapTlsMrpLeaveTime specifies a timer value in
10ths of seconds which determines the amount of time a
registered attribute is held in leave state before the
registration is removed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.70 |
sapTlsMrpLeaveAllTimeThe value of sapTlsMrpLeaveAllTime specifies the a timer
value in 10ths of seconds which determines the frequency
where all attribute declarations on the SAP are all
refreshed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.71 |
sapTlsMrpPeriodicTimeThe value of sapTlsMrpPeriodicTime specifies a timer value
in 10ths of seconds which determines the frequency of
re-transmission of attribute declarations.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.72 |
sapTlsMrpPeriodicEnabledThe value of sapTlsMrpPeriodicEnabled specifies whether
re-transmission of attribute declarations is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.73 |
sapTlsPppoePolicyThe value of sapTlsPppoePolicy specifies the PPPoE
policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable)
to use to create Managed SAPs via PPPoE with PAP/CHAP
authentication.
The value of sapTlsPppoePolicy is only valid for a SAP
with a sapSubType value of 'capture'. If the value is set
to a non-empty string for a SAP with a sapSubType value
other than 'capture', an 'inconsistentValue' error will
be returned.
The value of sapTlsPppoePolicy is used for PPP sessions
where the value of
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to
'oE' or 'oEoA'.
In general, the default value is empty; for a SAP
with a sapSubType value of 'capture', the default value
is equal to default.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.74 |
sapTlsArpMsapTriggerThe value of sapTlsArpMsapTrigger specifies whether
the receipt of ARP trigger packets on this VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsArpMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.75 |
sapTlsDefMsapServiceThe value of sapTlsDefMsapService specifies the
service ID of the service where Managed SAP's are created
when there is no Radius server available, or the Radius
server does not specify the service ID.
The value of sapTlsDefMsapService is only relevant for
a SAP with a sapSubType value of 'capture'.
While the value of sapTlsDefMsapService is equal to zero,
no Managed SAP's are created when there is no
Radius server-specified service ID available.
For a SAP with a sapSubType value other than 'capture',
zero is the only value allowed.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.76 |
sapTlsDefMsapGroupIfThe value of sapTlsDefMsapGroupIf specifies the name of
the group interface where Managed SAP's are created
when there is no Radius server available, or the Radius
server does not specify the group interface.
The value of sapTlsDefMsapGroupIf is only relevant for
a SAP with a sapSubType value of 'capture'.
While the value of sapTlsDefMsapGroupIf is the empty
string, no Managed SAP's are created when there is no
Radius server-specified group interface available.
For a SAP with a sapSubType value other than 'capture',
zero is the only value allowed.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.77 |
sapTlsMrpPolicyThe value of sapTlsMrpPolicy specifies the mrp
policy to control which Group BMAC attributes will
advertise on the egress SAP-SDP.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.78 |
sapTlsSiteNameThe value of sapTlsSiteName indicates the site-name
associated with this SAP.ro TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.79 |
sapTlsDhcp6MsapTriggerThe value of sapTlsDhcp6MsapTrigger specifies whether
the receipt of DHCPv6 trigger packets on this VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsDhcp6MsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.80 |
sapTlsShcvRetryTimeoutThe value of the object sapTlsShcvRetryTimeout specifies
the timeout in seconds before a connectivity check
retransmission.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.81 |
sapTlsShcvRetryCountThe value of the object sapTlsShcvRetryCount specifies
the number of connectivity check retransmissions.
Setting the value to n specifies that, for any given host,
at most (n+1) probes are done each interval,
and (n+1) missed replies are considered as a connectivity
failure.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.82 |
sapTlsDataSapInstStatusThe value of sapTlsDataSapInstStatus indicates the status
of the SAP which is instantiating other SAPs controlled
by this SAP.
This object is valid for services with
TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'.ro TmnxSapInstStatus .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.83 |
sapTlsDataSapInstLastErrThe value of sapTlsDataSapInstLastErr indicates last
error encountered while instantiating SAPs controlled
by this SAP.
This object is valid for services with
TIMETRA-SERV-MIB::svcMgmtVpls set to 'true'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.84 |
sapTlsMvrpAdminStatusThe value of sapTlsMvrpAdminStatus specifies whether MVRP
is enabled on this SAP.
The default value of sapTlsMvrpAdminStatus is set to 'enabled' for
MVRP enabled services.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.85 |
sapTlsMvrpOperStatusThe value of sapTlsMvrpOperStatus indicates operational status
of MVRP on this SAP.ro TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.86 |
sapTlsInTcBitBpdusThe value of the object sapTlsInTcBitBpdus indicates the
number of BPDUs received on this SAP
with the Topology Change bit set.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.87 |
sapTlsOutTcBitBpdusThe value of the object sapTlsOutTcBitBpdus indicates the
number of BPDUs sent out this SAP
with the Topology Change bit set.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.88 |
sapTlsPppMsapTriggerThe value of sapTlsPppMsapTrigger specifies whether
the receipt of PPP trigger packets on a VPLS SAP
with a sapSubType value of 'capture' will result in
a Radius authentication that will provide a service
context and the creation of a SAP with a sapSubType
value of 'managed'.
An attempt to set the value sapTlsPppoeMsapTrigger to
'true' on a SAP with sapSubType other than 'capture'
will return an 'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.89 |
sapTlsPppPolicyThe value of sapTlsPppPolicy specifies the
policy (defined in TIMETRA-PPPOE-MIB::tmnxPppoePlcyTable)
to use to create Managed SAPs via PPP with PAP/CHAP
authentication.
The value of sapTlsPppPolicy is only valid for a SAP
with a sapSubType value of 'capture'. If the value is set
to a non-empty string for a SAP with a sapSubType value
other than 'capture', an 'inconsistentValue' error will
be returned.
The value of sapTlsPppPolicy is used for PPP sessions
where the value of
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to
'oA', as opposed to 'oE' or 'oEoA'.
In general, the default value is empty; for a SAP
with a sapSubType value of 'capture', the default value
is equal to default.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.90 |
sapTlsTrackSrrpInstThe value of sapTlsTrackSrrpInst specifies the
SRRP instance to track.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.91 |
sapTlsPppUserDbThe value of sapTlsPppUserDb specifies the local user database
to use for PPP PAP/CHAP based authentication.
If no authentication with the local user database is required, the
value of this object must be set to the empty string.
The value of sapTlsPppUserDb is only valid for a SAP
with a sapSubType value of 'capture'. If the value is set
to a non-empty string for a SAP with a sapSubType value
other than 'capture', an 'inconsistentValue' error will
be returned.
The value of sapTlsPppUserDb is used for PPP sessions
where the value of
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to
'oA', as opposed to 'oE' or 'oEoA'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.92 |
sapTlsPppoeUserDbThe value of sapTlsPppoeUserDb specifies the local user database
to use for PPPoE PADI PAP/CHAP based authentication.
If no authentication with the local user database is required, the
value of this object must be set to the empty string.
The value of sapTlsPppoeUserDb is only valid for a SAP
with a sapSubType value of 'capture'. If the value is set
to a non-empty string for a SAP with a sapSubType value
other than 'capture', an 'inconsistentValue' error will
be returned.
The value of sapTlsPppoeUserDb is used for PPP sessions
where the value of
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppType is equal to
'oE' or 'oEoA', as opposed to 'oA'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.93 |
sapTlsDhcpUserDbThe value of sapTlsDhcpUserDb specifies the local user database
to use for DHCP based authentication.
If no authentication with the local user database is required, the
value of this object must be set to the empty string.
The value of sapTlsDhcpUserDb is only valid for a SAP
with a sapSubType value of 'capture'. If the value is set
to a non-empty string for a SAP with a sapSubType value
other than 'capture', an 'inconsistentValue' error will
be returned.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.94 |
sapTlsAutoLearnMacProtectThe value of sapTlsAutoLearnMacProtect specifies whether
to enable automatic population of the MAC protect list with
source MAC addresses learned on the associated SAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.3.1.95 |
sapAtmInfoTableA table that contains ATM SAP information. SEQUENCE OF SapAtmInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.4 |
sapAtmInfoEntryInformation about a specific ATM SAP. SapAtmInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.4.1 |
sapAtmEncapsulationThis object specifies the data encapsulation used
over the AAL5 SSCS layer. The definition references
RFC 2684 Multiprotocol Encapsulation over ATM AAL5
and to the ATM Forum LAN Emulation specification.rw TmnxSapAtmEncapsulation .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.1 |
sapAtmIngressTrafficDescIndexThis object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the ingress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulation over ATM AAL5 and to the ATM Forum LAN
Emulation specification.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.2 |
sapAtmEgressTrafficDescIndexThis object specifies the index of the ATM traffic
descriptor in the ATM traffic data encapsulation used
in for the egress direction over the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol
Encapsulation over ATM AAL5 and to the ATM Forum LAN
Emulation specification.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.3 |
sapAtmOamAlarmCellHandlingA value of up specifies that the OAM status of a pvc
affects the sap operational status and OAM AIS/RDI
cell generation upon a sap operational status of down.
A value of down specifies that the OAM status of a pvc
will not affect the operational status of the
associated sap and no OAM AIS/RDI cells are
generated.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.4 |
sapAtmOamTerminateThe sapAtmOamTerminate object specifies whether this
SAP will act as an OAM termination point.
If enabled, OAM cells will be sunk by the SAP and can
affect the SAP's operational status (if
sapAtmOamAlarmCellHandling is also enabled). Otherwise
the OAM cells will be passed into the APIPE service.
This object is only configurable for ATM SAPs that are
part of an APIPE service SDU or VCC mode. If the
sapPortId belongs to an Multi-Chassis APS port, the
default value is up.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.5 |
sapAtmOamPeriodicLoopbackThe sapAtmOamPeriodicLoopback object specifies whether
this SAP will run periodic OAM loopbacks or not. If
enabled, an ATM OAM loopback cell will be transmitted
every period as configured in tAtmSysOamLoopbackPeriod.
If a response is not received and tAtmSysOamRetryDown
consecutive retries also result in failure, the endpoint
will transition to the eteAisLoc state. Once in the
eteAisLoc state, an ATM OAM loopback cell will be
transmitted every period as configured in
tAtmSysOamLoopbackPeriod. If a response is received for
the periodic loopback and tAtmSysOamRetryUp consecutive
retries also each receive a response, the endpoint will
transition back to the up state. This object is only
configurable on IES or VPRN service endpoints.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.6 |
sapAtmLLFAdminStatussapAtmLLFAdminStatus specifies whether or not Link-
Loss Forwarding is enabled ('up'). When this object is set
to 'up' the underlying port will be forced into the
operationally 'down' state if the service is operationally
'down', or any of the 'sdpBindPwPeerStatusBits' are set,
and will set the underlying port's
tmnxPortReasonDownFlags 'linklossFwd' bit. Setting
this object to 'down' will clear the 'linklossFwd' reason.
sapAtmLLFAdminStatus can only be enabled on saps
configured for an APIPE service using an
port with the tmnxPortEncapType set to 'atmEncap' and
sapEncapValue set for ATM ports.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.7 |
sapAtmLLFOperStatussapAtmLLFOperStatus indicates whether or not the
underlying port is forced operationally 'down' due to the
service being operationally 'down' or an
sdpBindPwPeerStatusBits bit is set.
sapAtmLLFOperStatus is set to 'fault' when the
sapAtmLLFAdminStatus is set to 'up,' and either a
fault has occurred on the pseudo-wire, or the service is
down, otherwise sapAtmLLFOperStatus is set to 'clear.'ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.8 |
sapAtmSubPppIndexThe value of sapAtmSubPppIndex indicates
the local identifier of the subscriber PPP session.
It is the index of the corresponding conceptual row in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubPppTable.
The value zero indicates that there is no subscriber PPP
session associated with this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.10 |
sapAtmDetectedEncapsulationThis object indicates the AAL5 data encapsulation
detected by PPPoA (PPP over ATM) or PPPoEoA (PPP over
Ethernet over ATM).
The value is only applicable if sapAtmEncapsulation is
set to 'auto' and returns 'unknown' as long as no
encapsulation is detected.
If sapAtmEncapsulation is set to a value different than
'auto', sapAtmDetectedEncapsulation always returns the
same value as sapAtmEncapsulation.ro TmnxSapAtmEncapsulation .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.11 |
sapAtmIngressTrafficDescIndexOvrThis object indicates the index of the ATM
ingress traffic descriptor override.
This override value is given by an AAA server
such as a RADIUS server.
The value zero indicates that no override is given.ro AtmTrafficDescrParamIndex(0|1..1000) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.12 |
sapAtmEgressTrafficDescIndexOvrThis object indicates the index of the ATM
egress traffic descriptor override.
This override value is given by an AAA server
such as a RADIUS server.
The value zero indicates that no override is given.ro AtmTrafficDescrParamIndex(0|1..1000) .1.3.6.1.4.1.6527.3.1.2.4.3.4.1.13 |
sapBaseStatsTableA table that contains basic SAP statistics.
In the descriptions below 'Pchip' refers
to the Alcatel-Lucent SROS series Packet Processing
chip, while 'Qchip' refers to the Alcatel-Lucent
SROS series QoS Queueing Engine chip. SEQUENCE OF SapBaseStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.6 |
sapBaseStatsEntryBasic statistics about a specific SAP. SapBaseStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.6.1 |
sapBaseStatsIngressPchipDroppedPacketsThe number of packets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.1 |
sapBaseStatsIngressPchipDroppedOctetsThe number of octets dropped by the
ingress Pchip due to: SAP state,
ingress MAC, IP or IPv6 filter, same segment
discard, bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.2 |
sapBaseStatsIngressPchipOfferedHiPrioPacketsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.3 |
sapBaseStatsIngressPchipOfferedHiPrioOctetsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.4 |
sapBaseStatsIngressPchipOfferedLoPrioPacketsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.5 |
sapBaseStatsIngressPchipOfferedLoPrioOctetsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.6 |
sapBaseStatsIngressQchipDroppedHiPrioPacketsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.7 |
sapBaseStatsIngressQchipDroppedHiPrioOctetsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.8 |
sapBaseStatsIngressQchipDroppedLoPrioPacketsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.9 |
sapBaseStatsIngressQchipDroppedLoPrioOctetsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.10 |
sapBaseStatsIngressQchipForwardedInProfPacketsThe number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.11 |
sapBaseStatsIngressQchipForwardedInProfOctetsThe number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.12 |
sapBaseStatsIngressQchipForwardedOutProfPacketsThe number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.13 |
sapBaseStatsIngressQchipForwardedOutProfOctetsThe number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.14 |
sapBaseStatsEgressQchipDroppedInProfPacketsThe number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.15 |
sapBaseStatsEgressQchipDroppedInProfOctetsThe number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.16 |
sapBaseStatsEgressQchipDroppedOutProfPacketsThe number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.17 |
sapBaseStatsEgressQchipDroppedOutProfOctetsThe number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.18 |
sapBaseStatsEgressQchipForwardedInProfPacketsThe number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.19 |
sapBaseStatsEgressQchipForwardedInProfOctetsThe number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.20 |
sapBaseStatsEgressQchipForwardedOutProfPacketsThe number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.21 |
sapBaseStatsEgressQchipForwardedOutProfOctetsThe number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.22 |
sapBaseStatsCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.23 |
sapBaseStatsIngressPchipOfferedUncoloredPacketsThe number of uncolored packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.24 |
sapBaseStatsIngressPchipOfferedUncoloredOctetsThe number of uncolored octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.25 |
sapBaseStatsAuthenticationPktsDiscardedThe number of DHCP packets discarded
as result of authentication.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.26 |
sapBaseStatsAuthenticationPktsSuccessThe number of DHCP packets successfully authenticated.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.27 |
sapBaseStatsLastClearedTimeThe value of sapBaseStatsLastClearedTime indicates
the sysUpTime when the counters in this table were
last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.28 |
sapBaseStatsIngressCPMPacketsThe value of sapBaseStatsIngressCPMPackets indicates
ingress traffic in terms of packets destined to CPM
associated with this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.29 |
sapBaseStatsIngressCPMPacketsHiThe value of sapBaseStatsIngressCPMPacketsHi indicates
upper 32 bits of sapBaseStatsIngressCPMPackets object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.30 |
sapBaseStatsIngressCPMPacketsLoThe value of sapBaseStatsIngressCPMPacketsHi indicates
lower 32 bits of sapBaseStatsIngressCPMPackets object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.31 |
sapBaseStatsIngressCPMOctetsThe value of sapBaseStatsIngressCPMOctets indicates
ingress traffic in terms of bytes destined to CPM
associated with this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.32 |
sapBaseStatsIngressCPMOctetsHiThe value of sapBaseStatsIngressCPMOctetsHi indicates
upper 32 bits of sapBaseStatsIngressCPMOctets object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.33 |
sapBaseStatsIngressCPMOctetsLoThe value of sapBaseStatsIngressCPMOctetsHi indicates
lower 32 bits of sapBaseStatsIngressCPMOctets object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.6.1.34 |
sapIngQosQueueStatsTableA table that contains ingress QoS queue SAP
statistics. SEQUENCE OF SapIngQosQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.7 |
sapIngQosQueueStatsEntryIngress statistics about a specific SAP's
QoS queue. SapIngQosQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.7.1 |
sapIngQosQueueIdThe index of the ingress QoS queue of
this SAP.ro TSapIngQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.1 |
sapIngQosQueueStatsOfferedHiPrioPacketsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.2 |
sapIngQosQueueStatsDroppedHiPrioPacketsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.3 |
sapIngQosQueueStatsOfferedLoPrioPacketsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.4 |
sapIngQosQueueStatsDroppedLoPrioPacketsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.5 |
sapIngQosQueueStatsOfferedHiPrioOctetsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.6 |
sapIngQosQueueStatsDroppedHiPrioOctetsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.7 |
sapIngQosQueueStatsOfferedLoPrioOctetsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.8 |
sapIngQosQueueStatsDroppedLoPrioOctetsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.9 |
sapIngQosQueueStatsForwardedInProfPacketsThe number of in-profile packets
(rate below CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.10 |
sapIngQosQueueStatsForwardedOutProfPacketsThe number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.11 |
sapIngQosQueueStatsForwardedInProfOctetsThe number of in-profile octets
(rate below CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.12 |
sapIngQosQueueStatsForwardedOutProfOctetsThe number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.13 |
sapIngQosCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.14 |
sapIngQosQueueStatsUncoloredPacketsOfferedThe number of uncolored packets offered to
the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.15 |
sapIngQosQueueStatsUncoloredOctetsOfferedThe number of uncolored octets offered to
the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.7.1.16 |
sapEgrQosQueueStatsTableA table that contains egress QoS queue SAP
statistics. SEQUENCE OF SapEgrQosQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.8 |
sapEgrQosQueueStatsEntryEgress statistics about a specific SAP's
QoS queue. SapEgrQosQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.8.1 |
sapEgrQosQueueIdThe index of the egress QoS queue of
this SAP.ro TSapEgrQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.1 |
sapEgrQosQueueStatsForwardedInProfPacketsThe number of in-profile packets
(rate below CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.2 |
sapEgrQosQueueStatsDroppedInProfPacketsThe number of in-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.3 |
sapEgrQosQueueStatsForwardedOutProfPacketsThe number of out-of-profile packets
(rate above CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.4 |
sapEgrQosQueueStatsDroppedOutProfPacketsThe number of out-of-profile packets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.5 |
sapEgrQosQueueStatsForwardedInProfOctetsThe number of in-profile octets
(rate below CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.6 |
sapEgrQosQueueStatsDroppedInProfOctetsThe number of in-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.7 |
sapEgrQosQueueStatsForwardedOutProfOctetsThe number of out-of-profile octets
(rate above CIR) forwarded by the
egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.8 |
sapEgrQosQueueStatsDroppedOutProfOctetsThe number of out-of-profile octets
discarded by the egress Qchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.9 |
sapEgrQosCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.8.1.10 |
sapIngQosSchedStatsTableA table that contains ingress QoS queue SAP
statistics. SEQUENCE OF SapIngQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.9 |
sapIngQosSchedStatsEntryIngress statistics about a specific SAP's
QoS queue. SapIngQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.9.1 |
sapIngQosSchedNameThe index of the ingress QoS scheduler of
this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.1 |
sapIngQosSchedStatsForwardedPacketsThe number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.2 |
sapIngQosSchedStatsForwardedOctetsThe number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.3 |
sapIngQosSchedCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.9.1.4 |
sapEgrQosSchedStatsTableA table that contains ingress QoS queue SAP
statistics. SEQUENCE OF SapEgrQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.10 |
sapEgrQosSchedStatsEntryEgress statistics about a specific SAP's
QoS queue. SapEgrQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.10.1 |
sapEgrQosSchedNameThe index of the egress QoS scheduler of
this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.1 |
sapEgrQosSchedStatsForwardedPacketsThe number of forwarded packets by the
egress Qchip, as determined by the SAP
egress scheduler policy.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.2 |
sapEgrQosSchedStatsForwardedOctetsThe number of forwarded octets by the
egress Qchip, as determined by the SAP
egress scheduler policy.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.3 |
sapEgrQosSchedCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.10.1.4 |
sapTlsManagedVlanListTableThis table is used only for SAPs that are part
of a management VPLS. It indicates for each SAP the
ranges of associated VLANs that will be affected when
the SAP changes state. SEQUENCE OF SapTlsManagedVlanListEntry .1.3.6.1.4.1.6527.3.1.2.4.3.11 |
sapTlsManagedVlanListEntryEach row specifies a range of VLANS associated
with a SAP of a MVPLS. Ranges may contains overlapping
sections only for Mvpls SAPs that belong to the same
service. SapTlsManagedVlanListEntry .1.3.6.1.4.1.6527.3.1.2.4.3.11.1 |
sapTlsMvplsMinVlanTagThe value of sapTlsMvplsMinVlanTag specifies
the left bound (i.e. min. value) of a range of VLANs
that are associated with the Mvpls SAP.
sapTlsMvplsMinVlanTag must be smaller than (or equal
to) sapTlsMvplsMaxVlanTag.
Special values are:
0: this value is reserved for the null tag.
4095: this value denotes the default SAP. Unsigned32(0 .. 4095) .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.1 |
sapTlsMvplsMaxVlanTagThe value of sapTlsMvplsMaxVlanTag specifies the
right bound (i.e. max. value) of a range of VLANs that
are associated with the Mvpls SAP.
Special values are:
0: this value is reserved for the null tag.
4095: this value denotes the default SAP. Unsigned32(0 .. 4095) .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.2 |
sapTlsMvplsRowStatusThe value of sapTlsMvplsRowStatus specifies
the status of this row. The only values supported
during a set operation are 'createAndGo' and
'destroy'. A row (i.e. a range of VLAN tags) can be
destroyed only if there are no SAPs defined in
regular VPLSses in this range.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.11.1.3 |
sapAntiSpoofTableThe sapAntiSpoofTable contains information about
anti-spoofing filters on a SAP.obsolete SEQUENCE OF SapAntiSpoofEntry .1.3.6.1.4.1.6527.3.1.2.4.3.12 |
sapAntiSpoofEntryAn entry in the sapAntiSpoofTable.obsolete SapAntiSpoofEntry .1.3.6.1.4.1.6527.3.1.2.4.3.12.1 |
sapAntiSpoofIpAddressThe value of sapAntiSpoofIpAddress indicates the IP
address for which this table entry contains information.roobsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.12.1.1 |
sapAntiSpoofMacAddressThe value of sapAntiSpoofMacAddress indicates the MAC
address for which this table entry contains information.roobsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.12.1.2 |
sapStaticHostTableThe sapStaticHostTable is used to configure static hosts
on a SAP. SEQUENCE OF SapStaticHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.13 |
sapStaticHostEntryEach row entry represents information on a statically
configured host. Entries can be created and deleted via
SNMP SET operations. SapStaticHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.13.1 |
sapStaticHostRowStatusThe value of the object sapStaticHostRowStatus controls
the creation and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.1 |
sapStaticHostIpAddressThe value of the object sapStaticHostIpAddress specifies
the IP address associated with this static host. The value
0.0.0.0 indicates that no host IP address is specified. IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.2 |
sapStaticHostMacAddressThe value of the object sapStaticHostMacAddress specifies
the MAC address associated with this static host. The
value 0:0:0:0:0:0 indicates that no host MAC address is
specified. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.3 |
sapStaticHostSubscrIdentThe value of the object sapStaticHostSubscrIdent specifies
the subscriber identification for this static host.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.4 |
sapStaticHostSubProfileThe value of the object sapStaticHostSubProfile specifies
the subscriber profile for this static host. The specified
subscriber profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.5 |
sapStaticHostSlaProfileThe value of the object sapStaticHostSlaProfile specifies
the SLA profile for this static host. The specified
SLA profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.6 |
sapStaticHostShcvOperStateThe value of the object sapStaticHostShcvOperState
gives the state of the subscriber host connectivity
check for this static host.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.7 |
sapStaticHostShcvChecksThe value of the object sapStaticHostShcvChecks specifies
the number of connectivity checks for this static host.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.8 |
sapStaticHostShcvRepliesThe value of the object sapStaticHostShcvReplies specifies
the number of host replies for this static host.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.9 |
sapStaticHostShcvReplyTimeThe value of the object sapStaticHostShcvReplyTime
gives the timestamp of the last successful connectivity
check for this static host.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.10 |
sapStaticHostDynMacAddressThe value of the object sapStaticHostDynMacAddress gives
the MAC address learned via ARP in case this is an IP-only
static host (sapStaticHostMacAddress is set to
0:0:0:0:0:0).
The value 0:0:0:0:0:0 indicates that no MAC address is
learned yet.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.11 |
sapStaticHostRetailerSvcIdThe value of the object sapStaticHostRetailerSvcId
indicates the service ID of the retailer VPRN service
to which this static host belongs. When this object is
non zero, the static host belongs to a retailer VPRN.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.12 |
sapStaticHostRetailerIfThe value of the object sapStaticHostRetailerIf indicates
the interface index of the retailer VPRN interface to which
this static host belongs. When this object is non zero,
the static host belongs to a retailer VPRN.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.13 |
sapStaticHostFwdingStateThe value of sapStaticHostFwdingState indicates the
forwarding state of this static host. When the value
is 'outOfService', host traffic is not forwarded.
When it is 'inService', host traffic is forwarded.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.14 |
sapStaticHostAncpStringThe value of sapStaticHostAncpString specifies
the ancp-string associated to this SAP host.rw TmnxAncpStringOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.15 |
sapStaticHostSubIdIsSapIdThe value of the object sapStaticHostSubIdIsSapId
specifies whether the SAP-id is taken as subscriber
identification for this static host.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.16 |
sapStaticHostAppProfileThe value of sapStaticHostAppProfile specifies
the application profile for this static host. The
specified application profile needs to exist in the
TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.17 |
sapStaticHostIntermediateDestIdThe value of sapStaticHostIntermediateDestId specifies
to which intermediate destination (for example a DSLAM)
this host belongs.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.18 |
sapStaticHostAdminStatusThe value of sapStaticHostAdminStatus specifies
the administrative status of this host.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.19 |
sapStaticHostFilterProfileThe value of the object sapStaticHostFilterProfile specifies
the filter profile for this static host. The specified
filter profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.13.1.20 |
sapTlsDhcpInfoTablesapTlsDhcpInfoTable contains DHCP information related
to a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this
table are created and deleted automatically by the system. SEQUENCE OF SapTlsDhcpInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.14 |
sapTlsDhcpInfoEntryDHCP specific information for a TLS SAP. SapTlsDhcpInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.14.1 |
sapTlsDhcpAdminStateThe value of the object sapTlsDhcpAdminState specifies
the overall enable/disable state of all DHCP related
actions on this Sap. The value 'disabled' allows
the user to configure individual DHCP commands but
administratively disable them.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.1 |
sapTlsDhcpDescriptionThe value of the object sapTlsDhcpDescription specifies
a user provided description for DHCP on this Sap.
It consists of any printable, seven-bit ASCII characters
up to 80 characters in length.rw ServObjDesc (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.2 |
sapTlsDhcpSnoopThe value of the object sapTlsDhcpSnoop specifies
the enable/disable state for DHCP snooping on this Sap.
Note that in order for snooping to be enabled
the object sapTlsDhcpAdminState must also have the
value enabled.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.3 |
sapTlsDhcpLeasePopulateThe value of the object sapTlsDhcpLeasePopulate specifies
the maximum number of DHCP lease states allowed on this
SAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.4 |
sapTlsDhcpOperLeasePopulateThe value of the object sapTlsDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.5 |
sapTlsDhcpInfoActionThe value of the object sapTlsDhcpInfoAction specifies
the DHCP option reforwarding policy:
'replace' - replace existing information with
configured information
'drop' - discard messages with existing relay
information if the option-82 information
is also present.
'keep' - retain the existing relay information.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.6 |
sapTlsDhcpCircuitIdThe value of the object sapTlsDhcpCircuitId specifies
whether or not the circuit-id suboption is present, and if
it is present what information goes in it:
- 'none' the circuit-id suboption will not be part
of the information option (Option 82).
- 'asciiTuple' the ASCII-encoded concatenated tuple
consisting of the
- access-node-identifier
- service-id
- interface-name
is used.
- 'vlanAsciiTuple' the format will include VLAN-id and dot1p
bits in addition to what is included in
ascii-tuple already. The format is
supported on dot1q and qinq encapsulated
ports only. Thus, when the option 82
bits are stripped, dot1p bits will be
copied to the Ethernet header of an
outgoing packet.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.7 |
sapTlsDhcpRemoteIdThe value of the object sapTlsDhcpRemoteId specifies
what information goes into the remote-id suboption in
the DHCP Relay packet.
If the value of this object is set to 'none',
the remote-id suboption will not be part of the
information option (Option 82).
If the value of this object is set to 'mac',
the MAC address of the remote end is encoded in the
suboption.
If the value of this object is set to 'remote-id',
sapTlsDhcpRemoteIdString will represent the remote-id.
By default, the remote-id value is none.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.8 |
sapTlsDhcpRemoteIdStringThe value of the object sapTlsDhcpRemoteIdString specifies
the remote-id. This object exists only if
sapTlsDhcpRemoteId has a value of 'remote-id'.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.9 |
sapTlsDhcpProxyAdminStateThe value of sapTlsDhcpProxyAdminState specifies the
desired administrative state of the proxy server on this
interface.
Note that in order for the proxy server to be enabled,
the value of sapTlsDhcpAdminState must also be 'enabled'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.10 |
sapTlsDhcpProxyServerAddrThe value of sapTlsDhcpProxyServerAddr specifies
the IP address which will be used as the source address
of the emulated DHCP server in the context of
this VPLS SAP.
This address is mandatory for the proxy server capability
and it should be in the context of the subnet represented
by this VPLS.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.11 |
sapTlsDhcpProxyLeaseTimeThe value of sapTlsDhcpProxyLeaseTime specifies in seconds
how long a DHCP client is allowed to use the offered IP
address.
Value 0 means the lease time provided by a RADIUS or
an upstream DHCP server will not be overridden. A lease
time of 7 days is used when RADIUS does not provide
a lease time.rw Unsigned32 (0|300..315446399) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.12 |
sapTlsDhcpProxyLTRadiusOverrideThe value of sapTlsDhcpProxyLTRadiusOverride specifies
whether or not the lease time provided by the RADIUS
server is presented to the DHCP client.
By default the proxy-server will always make use of
sapTlsDhcpProxyLeaseTime, regardless of what lease time
information is provided from the RADIUS server.
When sapTlsDhcpProxyLTRadiusOverride is set to 'true', the
proxy-server will use the lease time information provided
by the RADIUS server, regardless of the configured one.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.13 |
sapTlsDhcpVendorIncludeOptionsThe value of sapTlsDhcpVendorIncludeOptions specifies
what is encoded in the Alcatel-Lucent vendor specific
sub-option of option 82.
The value of this object is only used when
sapTlsDhcpInfoAction is 'replace'.rw Bits .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.14 |
sapTlsDhcpVendorOptionStringThe value of sapTlsDhcpVendorOptionString specifies the
string that goes into the Alcatel-Lucent vendor specific
sub-option of option 82.
This string is only used when sapTlsDhcpInfoAction is set
to 'replace'.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.14.1.15 |
sapTlsDhcpStatsTablesapTlsDhcpStatsTable contains DHCP statistics related
to a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this
table are created and deleted automatically by the
system. SEQUENCE OF SapTlsDhcpStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.15 |
sapTlsDhcpStatsEntryDHCP statistics for a TLS SAP. SapTlsDhcpStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.15.1 |
sapTlsDhcpStatsClntSnoopdPcktsThe value of the object sapTlsDhcpStatsClntSnoopdPckts
indicates the number of DHCP client packets that have
been snooped on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.1 |
sapTlsDhcpStatsSrvrSnoopdPcktsThe value of the object sapTlsDhcpStatsSrvrSnoopdPckts
indicates the number of DHCP server packets that have
been snooped on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.2 |
sapTlsDhcpStatsClntForwdPcktsThe value of the object sapTlsDhcpStatsClntForwdPckts
indicates the number of DHCP client packets that
have been forwarded on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.3 |
sapTlsDhcpStatsSrvrForwdPcktsThe value of the object sapTlsDhcpStatsSrvrForwdPckts
indicates the number of DHCP server packets that have
been forwarded on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.4 |
sapTlsDhcpStatsClntDropdPcktsThe value of the object sapTlsDhcpStatsClntDropdPckts
indicates the number of DHCP client packets that have
been dropped on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.5 |
sapTlsDhcpStatsSrvrDropdPcktsThe value of the object sapTlsDhcpStatsSrvrDropdPckts
indicates the number of DHCP server packets that have
been dropped on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.6 |
sapTlsDhcpStatsClntProxRadPcktsThe value of the object sapTlsDhcpStatsClntProxRadPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on data received from a
RADIUS server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.7 |
sapTlsDhcpStatsClntProxLSPcktsThe value of the object sapTlsDhcpStatsClntProxLSPckts
indicates the number of DHCP client packets that have
been proxied on this SAP based on a lease state. The
lease itself can have been obtained from a DHCP or RADIUS
server. This is the so called lease split functionality.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.8 |
sapTlsDhcpStatsGenReleasePcktsThe value of the object sapTlsDhcpStatsGenReleasePckts
indicates the number of DHCP RELEASE messages spoofed on
this SAP to the DHCP server.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.9 |
sapTlsDhcpStatsGenForceRenPcktsThe value of the object sapTlsDhcpStatsGenForceRenPckts
indicates the number of DHCP FORCERENEW messages spoofed
on this SAP to the DHCP clients.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.15.1.10 |
sapTlsDhcpLeaseStateTablesapTlsDhcpLeaseStateTable contains DHCP lease state info
for a TLS SAP. This table complements sapTlsInfoTable,
and contains an entry for each Tls SAP. Rows in this table
are created and deleted automatically by the system.
The content of this table is moved to the
svcDhcpLeaseStateTable.obsolete SEQUENCE OF SapTlsDhcpLeaseStateEntry .1.3.6.1.4.1.6527.3.1.2.4.3.16 |
sapTlsDhcpLeaseStateEntryDHCP Lease State information on a TLS SAP.obsolete SapTlsDhcpLeaseStateEntry .1.3.6.1.4.1.6527.3.1.2.4.3.16.1 |
sapTlsDhcpLseStateCiAddrThe value of the object sapTlsDhcpLseStateCiAddr indicates
the IP address of the DHCP lease state.obsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.1 |
sapTlsDhcpLseStateChAddrThe value of the object sapTlsDhcpLseStateChAddr indicates
the MAC address of the DHCP lease state.obsolete MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.2 |
sapTlsDhcpLseStateRemainLseTimeThe value of the object sapTlsDhcpLseStateRemainLseTime
indicates the remaining lease time of the Ip address of
the DHCP lease state.
This object was made obsolete in the 4.0 release.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.3 |
sapTlsDhcpLseStateOption82The value of the object sapTlsDhcpLseStateOption82
indicates the content of the Option82 for this DHCP
lease state.
This object was made obsolete in the 4.0 release.roobsolete OCTET STRING .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.4 |
sapTlsDhcpLseStatePersistKeyThe value of the object sapTlsDhcpLseStatePersistKey
indicates a key value that can be used to track this lease
state in the persistence file.
This object was made obsolete in the 4.0 release.roobsolete Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.16.1.5 |
sapPortIdIngQosSchedStatsTableThe sapPortIdIngQosSchedStatsTable contains ingress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS. SEQUENCE OF SapPortIdIngQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.17 |
sapPortIdIngQosSchedStatsEntryEach entry represents the ingress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP. SapPortIdIngQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.17.1 |
sapPortIdIngQosSchedNameThe value of sapPortIdIngQosSchedName is used as an index
of the ingress QoS scheduler of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.1 |
sapPortIdIngPortIdThe value of sapPortIdIngPortId is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.2 |
sapPortIdIngQosSchedFwdPktsThe value of sapPortIdIngQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.3 |
sapPortIdIngQosSchedFwdOctetsThe value of sapPortIdIngQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.4 |
sapPortIdIngQosSchedCustIdThe value of sapPortIdIngQosSchedCustId indicates the
Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.17.1.5 |
sapPortIdEgrQosSchedStatsTableThe sapPortIdEgrQosSchedStatsTable contains egress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS. SEQUENCE OF SapPortIdEgrQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.18 |
sapPortIdEgrQosSchedStatsEntryEach entry represents the egress statistics about a
specific SAP's QoS queue. Entries are created when
a scheduler policy is applied to a SAP. SapPortIdEgrQosSchedStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.18.1 |
sapPortIdEgrQosSchedNameThe value of sapPortIdEgrQosSchedName is used as an index
of the egress QoS scheduler of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.1 |
sapPortIdEgrPortIdThe value of sapPortIdEgrPortId is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.2 |
sapPortIdEgrQosSchedFwdPktsThe value of sapPortIdEgrQosSchedFwdPkts indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.3 |
sapPortIdEgrQosSchedFwdOctetsThe value of sapPortIdEgrQosSchedFwdOctets indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.4 |
sapPortIdEgrQosSchedCustIdThe value of sapPortIdEgrQosSchedCustId indicates the
Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.18.1.5 |
sapIngQosQueueInfoTableThis table is used to override the base parameters
of a queue, as defined in the associated SAP
ingress QoS policy. SEQUENCE OF SapIngQosQueueInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.19 |
sapIngQosQueueInfoEntryOverride values for the specified SAP ingress QoS
queue. These values override the corresponding ones
specified in the associated SAP ingress QoS policy. SapIngQosQueueInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.19.1 |
sapIngQosQIdThe value of sapIngQosQId indicates the ID of the
queue whose parameters are to be overridden. TIngressQueueId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.1 |
sapIngQosQRowStatusThe value of sapIngQosQRowStatus controls the creation
and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.2 |
sapIngQosQLastMgmtChangeThe value of sapIngQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.3 |
sapIngQosQOverrideFlagsThe value of sapIngQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value defined on the SAP's ingress QoS policy.rw TQosQueueAttribute (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.4 |
sapIngQosQCBSThe value of sapIngQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue.rw TBurstSize UNITS "kilo bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.5 |
sapIngQosQMBSThe value of sapIngQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue.rwobsolete TBurstSize UNITS "kilo bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.6 |
sapIngQosQHiPrioOnlyThe value of sapIngQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets.rw TBurstPercentOrDefault UNITS "percent" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.7 |
sapIngQosQCIRAdaptationThe value of sapIngQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset.rw TAdaptationRule (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.8 |
sapIngQosQPIRAdaptationThe value of sapIngQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset.rw TAdaptationRule (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.9 |
sapIngQosQAdminPIRThe value of sapIngQosQAdminPIR specifies the desired
PIR value for this queue.rw TPIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.10 |
sapIngQosQAdminCIRThe value of sapIngQosQAdminCIR specifies the desired
CIR value for this queue.rw TCIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.11 |
sapIngQosQMBSBytesThe value of sapIngQosQMBSBytes specifies the maximum
amount of buffer space (in bytes) allowed for
this queue.rw TBurstSizeBytes UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.12 |
sapIngQosQWeightThe value of sapIngQosQWeight specifies the weight that needs to be
used by the scheduler to which this queue would be feeding.rw TWeight (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.13 |
sapIngQosQCIRWeightThe value of sapIngQosQCIRWeight specifies the weight that should be
assigned to this queue by the parent scheduler among all the entities
feeding into the parent, when the traffic is conforming to the
committed rate.
A value of '0' specifies that the queue will not receive bandwidth for
the 'within-cir' pass on its parent scheduler.rw TWeight (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.14 |
sapIngQosQAdminPIRPercentThe value of sapIngQosQAdminPIRPercent specifies the
desired PIR value for this queue as a percentage.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.15 |
sapIngQosQAdminCIRPercentThe value of sapIngQosQAdminCIRPercent specifies the
desired CIR value for this queue as a percentage.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.19.1.16 |
sapEgrQosQueueInfoTableThis table is used to override the base parameters
of a queue, as defined in the associated SAP
egress QoS policy. SEQUENCE OF SapEgrQosQueueInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.20 |
sapEgrQosQueueInfoEntryOverride values for the specified SAP egress QoS
queue. These values override the corresponding ones
specified in the associated SAP egress QoS policy. SapEgrQosQueueInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.20.1 |
sapEgrQosQIdThe value of sapEgrQosQId indicates the ID of the
queue whose parameters are to be overridden. TEgressQueueId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.1 |
sapEgrQosQRowStatusThe value of sapEgrQosQRowStatus controls the creation
and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.2 |
sapEgrQosQLastMgmtChangeThe value of sapEgrQosQLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.3 |
sapEgrQosQOverrideFlagsThe value of sapEgrQosQOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this queue. Clearing a given flag
will return the corresponding overridden attribute
to the value defined on the SAP's ingress QoS policy.rw TQosQueueAttribute (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.4 |
sapEgrQosQCBSThe value of sapEgrQosQCBS specifies the amount of
reserved buffer space (in kilo bytes) for this queue.rw TBurstSize UNITS "kilo bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.5 |
sapEgrQosQMBSThe value of sapEgrQosQMBS specifies the maximum
amount of buffer space (in kilo bytes) allowed for
this queue.rwobsolete TBurstSize UNITS "kilo bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.6 |
sapEgrQosQHiPrioOnlyThe value of sapEgrQosQHiPrioOnly specifies the
percentage of buffer space for this queue, used
exclusively by high priority packets.rw TBurstPercentOrDefault UNITS "percent" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.7 |
sapEgrQosQCIRAdaptationThe value of sapEgrQosQCIRAdaptation specifies the
criteria to use to compute the operational CIR value
for this queue, while maintaining a minimum offset.rw TAdaptationRule (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.8 |
sapEgrQosQPIRAdaptationThe value of sapEgrQosQPIRAdaptation specifies the
criteria to use to compute the operational PIR value
for this queue, while maintaining a minimum offset.rw TAdaptationRule (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.9 |
sapEgrQosQAdminPIRThe value of sapEgrQosQAdminPIR specifies the desired
PIR value for this queue.rw TPIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.10 |
sapEgrQosQAdminCIRThe value of sapEgrQosQAdminCIR specifies the desired
CIR value for this queue.rw TCIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.11 |
sapEgrQosQAvgOverheadThe value of sapEgrQosQAvgOverhead specifies the
encapsulation overhead, in hundredths of a percent,
used to translate packet-based rate to frame-based
rate and vice versa.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.12 |
sapEgrQosQMBSBytesThe value of sapEgrQosQMBSBytes specifies the maximum
amount of buffer space (in bytes) allowed for
this queue.rw TBurstSizeBytes UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.13 |
sapEgrQosQWeightThe value of sapEgrQosQWeight specifies the weight that needs to be
used by the scheduler to which this queue would be feeding.rw TWeight (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.14 |
sapEgrQosQCIRWeightThe value of sapEgrQosQCIRWeight specifies the weight that should be
assigned to this queue by the parent scheduler among all the entities
feeding into the parent, when the traffic is conforming to the
committed rate.
A value of '0' specifies that the queue will not receive bandwidth for
the 'within-cir' pass on its parent scheduler.rw TWeight (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.15 |
sapEgrQosQAdminPIRPercentThe value of sapEgrQosQAdminPIRPercent specifies the desired
PIR value for this queue as a percentage.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.16 |
sapEgrQosQAdminCIRPercentThe value of sapEgrQosQAdminCIRPercent specifies the desired
CIR value for this queue as a percentage.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.20.1.17 |
sapIngQosSchedInfoTableThis table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP ingress scheduler policy. SEQUENCE OF SapIngQosSchedInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.21 |
sapIngQosSchedInfoEntryOverride values for the specified SAP ingress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP ingress scheduler
policy. SapIngQosSchedInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.21.1 |
sapIngQosSNameThe value of sapIngQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.1 |
sapIngQosSRowStatusThe value of sapIngQosSRowStatus controls the creation
and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.2 |
sapIngQosSLastMgmtChangeThe value of sapIngQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.3 |
sapIngQosSOverrideFlagsThe value of sapIngQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute to the value defined on the SAP's ingress
scheduler policy.rw TVirtSchedAttribute (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.4 |
sapIngQosSPIRThe value of sapIngQosSPIR specifies the desired
PIR value for this virtual scheduler.rw THPolVirtualSchePIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.5 |
sapIngQosSCIRThe value of sapIngQosSCIR specifies the desired
CIR value for this virtual scheduler.rw THPolVirtualScheCIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.6 |
sapIngQosSSummedCIRThe value of sapIngQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapIngQosSCIR) loses its meaning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.21.1.7 |
sapEgrQosSchedInfoTableThis table is used to override the base parameters
of a virtual scheduler, as defined in the associated
SAP egress scheduler policy. SEQUENCE OF SapEgrQosSchedInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.22 |
sapEgrQosSchedInfoEntryOverride values for the specified SAP egress virtual
scheduler. These values override the corresponding
ones specified in the associated SAP egress scheduler
policy. SapEgrQosSchedInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.22.1 |
sapEgrQosSNameThe value of sapEgrQosSName indicates the name of
the virtual scheduler whose parameters are to be
overridden. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.1 |
sapEgrQosSRowStatusThe value of sapEgrQosSRowStatus controls the creation
and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.2 |
sapEgrQosSLastMgmtChangeThe value of sapEgrQosSLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.3 |
sapEgrQosSOverrideFlagsThe value of sapEgrQosSOverrideFlags specifies the
set of attributes whose values have been overridden
via management on this virtual scheduler. Clearing a
given flag will return the corresponding overridden
attribute to the value defined on the SAP's egress
scheduler policy.rw TVirtSchedAttribute (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.4 |
sapEgrQosSPIRThe value of sapEgrQosSPIR specifies the desired
PIR value for this virtual scheduler.rw THPolVirtualSchePIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.5 |
sapEgrQosSCIRThe value of sapEgrQosSCIR specifies the desired
CIR value for this virtual scheduler.rw THPolVirtualScheCIRRate UNITS "kilo bits per second" .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.6 |
sapEgrQosSSummedCIRThe value of sapEgrQosSSummedCIR specifies if the CIR
should be used as the summed CIR values of the children
schedulers or queues. If set to 'true', the applicable
scheduler CIR (sapEgrQosSCIR) loses its meaning.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.22.1.7 |
sapSubMgmtInfoTableA table that contains SAP subscriber management
information. SEQUENCE OF SapSubMgmtInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.23 |
sapSubMgmtInfoEntrySubscriber management specific information about a SAP. SapSubMgmtInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.23.1 |
sapSubMgmtAdminStatusThe value of sapSubMgmtAdminStatus specifies whether
enhanced subscriber management is enabled on this SAP.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.1 |
sapSubMgmtDefSubProfileThe value of sapSubMgmtDefSubProfile specifies the default
subscriber profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubProfileTable.
A value of 'default' is not allowed for this object.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.2 |
sapSubMgmtDefSlaProfileThe value of sapSubMgmtDefSlaProfile specifies the default
SLA profile applicable on this SAP. The corresponding
profile is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSLAProfileTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.3 |
sapSubMgmtSubIdentPolicyThe value of sapSubMgmtSubIdentPolicy specifies the
subscriber identification policy applicable on this SAP.
The corresponding policy is defined in
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubIdentPolicyTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.4 |
sapSubMgmtSubscriberLimitThe value of sapSubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for this SAP.
If the value is 0, there is no limit. Only if the value is
1, the 'single-sub-parameters' defined with objects
sapSubMgmtProfiledTrafficOnly,
sapSubMgmtNonSubTrafficSubProf and
sapSubMgmtNonSubTrafficSlaProf are meaningful.rw TmnxSapSubscriberLimit .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.5 |
sapSubMgmtProfiledTrafficOnlyThe value of sapSubMgmtProfiledTrafficOnly specifies
whether only profiled traffic is applicable for this SAP.
If set to 'true', all SAP queues will be deleted.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.6 |
sapSubMgmtNonSubTrafficSubIdentThe value of sapSubMgmtNonSubTrafficSubIdent specifies the
subscriber identification applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.7 |
sapSubMgmtNonSubTrafficSubProfThe value of sapSubMgmtNonSubTrafficSubProf specifies the
subscriber profile applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.8 |
sapSubMgmtNonSubTrafficSlaProfThe value of sapSubMgmtNonSubTrafficSlaProf specifies the
SLA profile applicable on this SAP for all non-subscriber
traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.9 |
sapSubMgmtMacDaHashingThe value of sapSubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG SAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id.
The value of this object is only meaningful if
sapSubMgmtAdminStatus is set to 'enabled' and can only
be configured for TLS services.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.10 |
sapSubMgmtDefSubIdentThe value of sapSubMgmtDefSubIdent specifies what is
used as the default subscriber identification applicable
on this SAP.
This value is used in case no other source (like Radius)
provides a subscriber identification string.
If the value of this objects is set to 'useSapId',
the SAP-id is used as the default subscriber identification
string. In this case, sapSubMgmtDefSubIdentString must
contain the empty string.
If the value of this objects is set to 'useAutoId',
the auto-generated subscriber identification string,
as defined in tmnxSubMgmtAutoSubIdObjs, is used as the
default subscriber identification string. In this case,
sapSubMgmtDefSubIdentString must contain the empty string.
If the value of this object is set to 'useString',
the value of sapSubMgmtDefSubIdentString is used as the
default subscriber identification string. In this case,
an empty sapSubMgmtDefSubIdentString means that there is no
default subscriber identification configured.rw TmnxDefSubIdSource (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.11 |
sapSubMgmtDefSubIdentStringThe value of sapSubMgmtDefSubIdentString specifies the
default subscriber identification string applicable on
this SAP.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.12 |
sapSubMgmtDefAppProfileThe value of sapSubMgmtDefAppProfile specifies the default
application profile applicable on this SAP. The
corresponding profile is defined in
TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.13 |
sapSubMgmtNonSubTrafficAppProfThe value of sapSubMgmtNonSubTrafficAppProf specifies the
application profile applicable on this SAP for all
non-subscriber traffic.
The value of this object is only meaningful if
sapSubMgmtSubscriberLimit is set to 1.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.14 |
sapSubMgmtDefInterDestIdThe value of sapSubMgmtDefInterDestId specifies what is
used as the default intermediate destination identifier
applicable on this SAP.
This value is used in case no other source (like Radius)
provides an intermediate destination identifier.
If the value of this object is set to 'useString',
the value of sapSubMgmtDefInterDestIdString is used as
the default intermediate destination identifier. In this
case, an empty sapSubMgmtDefInterDestIdString means that
there is no default intermediate destination identifier
configured.
If the value of this object is set to 'useTopQTag', the
top q-tag of this SAP is used as the default intermediate
destination identifier. In this case,
sapSubMgmtDefInterDestIdString must contain the empty
string.
If the value of this object is set to 'useVpi', the
ATM VPI of this SAP is used as the default intermediate
destination identifier. In this case,
sapSubMgmtDefInterDestIdString must contain the empty
string.rw TmnxDefInterDestIdSource (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.15 |
sapSubMgmtDefInterDestIdStringThe value of sapSubMgmtDefInterDestIdString specifies the
default intermediate destination identifier applicable on
this SAP.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.16 |
sapSubMgmtDefFilterProfileThe value of the object sapSubMgmtDefFilterProfile specifies
the default filter profile for this SAP. The specified
filter profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.23.1.17 |
sapTlsMstiTableThis table contains Multiple Spanning Tree Instance
information for the SAP. Each management VPLS running
MSTP can have upto 15 MSTI. An entry in this table is
automatically created when a tlsMstiEntry is created. SEQUENCE OF SapTlsMstiEntry .1.3.6.1.4.1.6527.3.1.2.4.3.24 |
sapTlsMstiEntryInformation about a specific MSTI for a SAP. SapTlsMstiEntry .1.3.6.1.4.1.6527.3.1.2.4.3.24.1 |
sapTlsMstiPriorityThe value of the object sapTlsMstiPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP and MSTI. As only the most
significant 4 bits of the value are used, the actual value
of this object is limited to multiples of 16: e.g. the
agent rounds down the value to one of: 0, 16, 32, .. ,
224, 240.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.1 |
sapTlsMstiPathCostThe value of the object sapTlsMstiPathCost specifies the
contribution of this port to the MSTI path cost of paths
towards the spanning tree regional root which include this
port.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.2 |
sapTlsMstiLastMgmtChangeThe value of the object sapTlsMstiLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this SAP MSTI information.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.3 |
sapTlsMstiPortRolesapTlsMstiPortRole indicates the current role of the
sap in the MSTI as defined by the Spanning Tree Protocol.ro StpPortRole (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.4 |
sapTlsMstiPortStateThe value of the object sapTlsMstiPortState indicates the
port's current state as defined by application of the
Spanning Tree Protocol. This state controls what action a
port takes on reception of a frame. If the bridge has
detected a port that is malfunctioning it will
place that port into the 'broken' state.ro TStpPortState (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.5 |
sapTlsMstiDesignatedBridgeThe value of the object sapTlsMstiDesignatedBridge
indicates the Bridge Identifier of the bridge which this
port considers to be the Designated Bridge for this port's
segment for this MSTI.ro BridgeId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.6 |
sapTlsMstiDesignatedPortThe value of the object sapTlsMstiDesignatedPort indicates
the Port Identifier of the port on the Designated Bridge
for this port's segment for this MSTI.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.24.1.7 |
sapIpipeInfoTableA table that contains IPIPE specific SAP information. SEQUENCE OF SapIpipeInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.25 |
sapIpipeInfoEntryIPIPE specific information about a SAP. SapIpipeInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.25.1 |
sapIpipeCeInetAddressTypeThe value of the object sapIpipeCeInetAddressType
specifies the addresstype of the local end host IP
of an IPIPE.
This object is only configurable if the value of
'svcIpipeCeAddressDiscovery' is 'disabled.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.1 |
sapIpipeCeInetAddressThe type of this address is determined by the value of
the sapIpipeCeInetAddressType object.
This object specifies the IPv4 address of the
local end host of an IPIPE.
This object is only configurable if the value of
'svcIpipeCeAddressDiscovery' is 'disabled.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.2 |
sapIpipeMacRefreshIntervalThe value of sapIpipeMacRefreshInterval specifies the interval
between successive attempts to refresh the MAC address of the CE
device associated with an Ethernet ipipe SAP. If no other event
(such as reception of an ARP request from the CE) occurs that
would refresh the MAC address before the end of the interval,
an ARP request will be originated from the IPIPE SAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.3 |
sapIpipeMacAddressThe value of the object sapIpipeMacAddress specifies
the MAC address of an IPIPE Ethernet SAP.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.4 |
sapIpipeArpedMacAddressThe value of the object sapIpipeArpedMacAddress indicates
the MAC address of the local end host.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.5 |
sapIpipeArpedMacAddressTimeoutThe value of the object sapIpipeArpedMacAddressTimeout
indicates the number of seconds to wait for the
sapIpipeArpedMacAddress to be re-refreshed.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.6 |
sapIpipeDiscoveredCeInetAddrTypeThe value of the object sapIpipeDiscoveredCeInetAddrType
indicates the addresstype of the local end discovered
host IP of an IPIPE SAP.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.7 |
sapIpipeDiscoveredCeInetAddrThe type of this address is determined by the value of
the sapIpipeDiscoveredCeInetAddrType object.
This object indicates the IPv4 address of the discovered
local end host of an IPIPE SAP.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.8 |
sapIpipeUseBroadcastMacThe value of sapIpipeUseBroadcastMac specifies whether
to use a broadcast MAC address to forward traffic from
the Ethernet Ipipe SAP when sapIpipeArpedMacAddress is
not a valid MAC address (no ARPed MAC address).
If svcIpipeCeAddressDiscovery is set to 'disabled (2)',
this value cannot be changed from the default value.
For non-Ethernet SAPs this value cannot be changed
from the default value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.9 |
sapIpipeUsingBroadcastMacThe value of sapIpipeUsingBroadcastMac indicates whether
a broadcast MAC address is currently being used to
forward traffic from the Ethernet Ipipe SAP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.10 |
sapIpipeIpv6LinkLocalCeInetAddrThis object indicates the discovered link local IPv6
address of the local end host of an IPIPE SAP.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.11 |
sapIpipeIpv6GlobalCeInetAddrThis object indicates the discovered global IPv6
address of the local end host of an IPIPE SAP.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.12 |
sapIpipeIpv6DiscoveredMacAddressThe value of the object sapIpipeIpv6DiscoveredMacAddress
indicates the MAC address of the IPv6 local end host.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.25.1.13 |
sapTodMonitorTableThis table contains information on configurable objects
on SAP level, that can be modified by a scheduled policy. SEQUENCE OF SapTodMonitorEntry .1.3.6.1.4.1.6527.3.1.2.4.3.26 |
sapTodMonitorEntryInformation about ToD policy modifiable config data
for a SAP. SapTodMonitorEntry .1.3.6.1.4.1.6527.3.1.2.4.3.26.1 |
sapCurrentIngressIpFilterIdThe value of the object sapCurrentIngressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the ingress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may deviate from sapIngressIpFilterId in
case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.1 |
sapCurrentIngressIpv6FilterIdThe value of the object sapCurrentIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressIpv6FilterId
in case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.2 |
sapCurrentIngressMacFilterIdThe value of the object sapCurrentIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressMacFilterId
in case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.3 |
sapCurrentIngressQosPolicyIdThe value of the object sapCurrentIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapIngressQosPolicyId
in case it is overruled by a ToD Suite policy.ro TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.4 |
sapCurrentIngressQosSchedPlcyThe value of the object sapCurrentIngressQosSchedPlcy
indicates the ingress QoS scheduler on this SAP, or zero
if none is currently active.
The active policy may deviate from
sapIngressQosSchedulerPolicy in case it is overruled by a
ToD Suite policy defined on this SAP, or on the
multi-service this SAP belongs to.ro ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.5 |
sapCurrentEgressIpFilterIdThe value of the object sapCurrentEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress filter applied on this SAP, or zero if no
filter is currently active.
The active filter may deviate from sapEgressIpFilterId in
case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.6 |
sapCurrentEgressIpv6FilterIdThe value of the object sapCurrentEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress Ipv6 filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressIpv6FilterId
in case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.7 |
sapCurrentEgressMacFilterIdThe value of the object sapCurrentEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress Mac filter applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressMacFilterId in
case it is overruled by a ToD Suite policy.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.8 |
sapCurrentEgressQosPolicyIdThe value of the object sapCurrentEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy applied on this SAP, or zero if
no filter is currently active.
The active filter may deviate from sapEgressQosPolicyId in
case it is overruled by a ToD Suite policy.ro TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.9 |
sapCurrentEgressQosSchedPlcyThe value of the object sapCurrentEgressQosSchedPlcy
indicates the Egress QoS scheduler on this SAP, or zero if
none is currently active.
The active policy may deviate from
sapEgressQosSchedulerPolicy in case it is overruled by a
ToD Suite policy defined on this SAP, or on the
multi-customer this SAP belongs to.ro ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.10 |
sapIntendedIngressIpFilterIdThe value of the object sapIntendedIngressIpFilterId
indicates the index in the tIPFilterTable corresponding
to the ingress IP filter that should be applied on
this SAP.
If it deviates from sapCurrentIngressIpFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites
for the SAP. When the ToD Suites decides that a new
filter must be applied, it will try to do this. If it
fails, the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.11 |
sapIntendedIngressIpv6FilterIdThe value of the object sapIntendedIngressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the ingress Ipv6 filter that should be applied on this
SAP.
If it deviates from sapCurrentIngressIpv6FilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites
for the SAP. When the ToD Suites decides that a new
filter must be applied, it will try to do this. If it
fails, the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.12 |
sapIntendedIngressMacFilterIdThe value of the object sapIntendedIngressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the ingress Mac filter that should be applied
on this SAP.
If it deviates from sapCurrentIngressMacFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.13 |
sapIntendedIngressQosPolicyIdThe value of the object sapIntendedIngressQosPolicyId
indicates the index in the tSapIngressTable corresponding
to the ingress Qos policy that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosPolicyId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails, the
current and intended field are not equal.ro TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.14 |
sapIntendedIngressQosSchedPlcyThe value of the object sapIntendedIngressQosSchedPlcy
indicates the ingress QoS scheduler that should be applied
on this SAP.
If it deviates from sapCurrentIngressQosSchedPlcy, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.15 |
sapIntendedEgressIpFilterIdThe value of the object sapIntendedEgressIpFilterId
indicates the index in the tIPFilterTable corresponding to
the Egress IP filter scheduler that should be applied on
this SAP.
If it deviates from sapCurrentEgressIpFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.16 |
sapIntendedEgressIpv6FilterIdThe value of the object sapIntendedEgressIpv6FilterId
indicates the index in the tIPv6FilterTable corresponding
to the Egress IPv6 filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgressIpv6FilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17 |
sapIntendedEgressMacFilterIdThe value of the object sapIntendedEgressMacFilterId
indicates the index in the tMacFilterTable corresponding
to the Egress mac filter scheduler that should be applied
on this SAP.
If it deviates from sapCurrentEgressMacFilterId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.18 |
sapIntendedEgressQosPolicyIdThe value of the object sapIntendedEgressQosPolicyId
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Policy that should be applied
on this SAP.
If it deviates from sapCurrentEgressQosPolicyId, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19 |
sapIntendedEgressQosSchedPlcyThe value of the object sapIntendedEgressQosSchedPlcy
indicates the index in the tSapEgressTable corresponding
to the Egress Qos Scheduler policy that should be applied
on this SAP.
If it deviates from sapCurrentEgressQosSchedPlcy, this
means that there was a problem when trying to activate
this filter. It can only deviate when using ToD Suites for
the SAP. When the ToD Suites decides that a new filter
must be applied, it will try to do this. If it fails,
the current and intended field are not equal.ro ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.26.1.20 |
sapIngrQosPlcyStatsTableA table that contains Ingress Qos policy related
statistics for a SAP.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapIngrQosPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.27 |
sapIngrQosPlcyStatsEntryStatistics about a specific Ingress Qos Policy applied
on a specific SAP. SapIngrQosPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.27.1 |
sapIgQosPlcyIdThe value of the object sapIgQosPlcyId indicates
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified. TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.1 |
sapIgQosPlcyDroppedHiPrioPacketsThe value of the object sapIgQosPlcyDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.2 |
sapIgQosPlcyDroppedHiPrioOctetsThe value of the object sapIgQosPlcyDroppedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.3 |
sapIgQosPlcyDroppedLoPrioPacketsThe value of the object sapIgQosPlcyDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.4 |
sapIgQosPlcyDroppedLoPrioOctetsThe value of the object sapIgQosPlcyDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.5 |
sapIgQosPlcyForwardedInProfPacketsThe value of the object sapIgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.6 |
sapIgQosPlcyForwardedInProfOctetsThe value of the object sapIgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.7 |
sapIgQosPlcyForwardedOutProfPacketsThe value of the object sapIgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.8 |
sapIgQosPlcyForwardedOutProfOctetsThe value of the object sapIgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.27.1.9 |
sapEgrQosPlcyStatsTableA table that contains Egress Qos policy related
statistics for a SAP.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapEgrQosPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.28 |
sapEgrQosPlcyStatsEntryStatistics about a specific Egress Qos Policy applied
on a specific SAP. SapEgrQosPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.28.1 |
sapEgQosPlcyIdThe value of the object sapEgQosPlcyId indicates
the row index in the tSapEgressTable corresponding to this
egress QoS policy, or one if no policy is specified. TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.1 |
sapEgQosPlcyDroppedInProfPacketsThe value of the object sapEgQosPlcyDroppedInProfPackets
indicates the number of in-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.2 |
sapEgQosPlcyDroppedInProfOctetsThe value of the object sapEgQosPlcyDroppedInProfOctets
indicates the number of in-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.3 |
sapEgQosPlcyDroppedOutProfPacketsThe value of the object sapEgQosPlcyDroppedOutProfPackets
indicates the number of out-profile packets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.4 |
sapEgQosPlcyDroppedOutProfOctetsThe value of the object sapEgQosPlcyDroppedOutProfOctets
indicates the number of out-profile octets,
as determined by the SAP egress QoS
policy, dropped by the Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.5 |
sapEgQosPlcyForwardedInProfPacketsThe value of the object sapEgQosPlcyForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.6 |
sapEgQosPlcyForwardedInProfOctetsThe value of the object sapEgQosPlcyForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.7 |
sapEgQosPlcyForwardedOutProfPacketsThe value of the object sapEgQosPlcyForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.8 |
sapEgQosPlcyForwardedOutProfOctetsThe value of the object sapEgQosPlcyForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.28.1.9 |
sapIngQosPlcyQueueStatsTableA table that contains ingress QoS queue SAP
statistics, per Ingress QoS Policy the queue
was used by.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapIngQosPlcyQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.29 |
sapIngQosPlcyQueueStatsEntryIngress statistics about a specific SAP's
QoS queue for a given Qos policy. SapIngQosPlcyQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.29.1 |
sapIgQosPlcyQueuePlcyIdThe value of the object sapIgQosPlcyQueuePlcyId indicates
the row index in the tSapIngressTable corresponding to
this ingress QoS policy. TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.1 |
sapIgQosPlcyQueueIdThe index of the ingress QoS queue of this SAP used by the
policy indicated by sapIgQosPlcyQueuePlcyId. TSapIngQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.2 |
sapIgQosPlcyQueueStatsOfferedHiPrioPacketsThe value of sapIgQosPlcyQueueStatsOfferedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.3 |
sapIgQosPlcyQueueStatsDroppedHiPrioPacketsThe value of sapIgQosPlcyQueueStatsDroppedHiPrioPackets
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.4 |
sapIgQosPlcyQueueStatsOfferedLoPrioPacketsThe value of sapIgQosPlcyQueueStatsOfferedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.5 |
sapIgQosPlcyQueueStatsDroppedLoPrioPacketsThe value of sapIgQosPlcyQueueStatsDroppedLoPrioPackets
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.6 |
sapIgQosPlcyQueueStatsOfferedHiPrioOctetsThe value of sapIgQosPlcyQueueStatsOfferedHiPrioOctets
indicates the number of high priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.7 |
sapIgQosPlcyQueueStatsDroppedHiPrioOctetsThe value of sapIgQosPlcyQueueStatsDroppedHiPrioOctets
indicates the number ofhigh priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.8 |
sapIgQosPlcyQueueStatsOfferedLoPrioOctetsThe value of sapIgQosPlcyQueueStatsOfferedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.9 |
sapIgQosPlcyQueueStatsDroppedLoPrioOctetsThe value of sapIgQosPlcyQueueStatsDroppedLoPrioOctets
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.10 |
sapIgQosPlcyQueueStatsForwardedInProfPacketsThe value of sapIgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.11 |
sapIgQosPlcyQueueStatsForwardedOutProfPacketsThe value of sapIgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.12 |
sapIgQosPlcyQueueStatsForwardedInProfOctetsThe value of sapIgQosPlcyQueueStatsForwardedInProfOctets
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.13 |
sapIgQosPlcyQueueStatsForwardedOutProfOctetsThe value of sapIgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.14 |
sapIgQosPlcyQueueCustIdThe value of the object sapIgQosPlcyQueueCustId
indicates the Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.15 |
sapIgQosPlcyQueueStatsUncoloredPacketsOfferedThe value of sapIgQosPlcyQueueStatsUncoloredPacketsOffered
indicates the number of uncolored packets offered to
the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.16 |
sapIgQosPlcyQueueStatsUncoloredOctetsOfferedThe value of sapIgQosPlcyQueueStatsUncoloredOctetsOffered
indicates the number of uncolored octets offered to
the ingress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.29.1.17 |
sapEgrQosPlcyQueueStatsTableA table that contains egress QoS queue SAP
statistics per Egress QoS Policy the queue
was used by.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapEgrQosPlcyQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.30 |
sapEgrQosPlcyQueueStatsEntryEgress statistics about a specific SAP's
QoS queue for a given Qos policy. SapEgrQosPlcyQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.30.1 |
sapEgQosPlcyQueuePlcyIdThe row index in the tSapEgressTable
corresponding to this egress QoS policy. TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.1 |
sapEgQosPlcyQueueIdThe value of sapEgQosPlcyQueueId indicates
index of the egress QoS queue of this SAP. TSapEgrQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.2 |
sapEgQosPlcyQueueStatsForwardedInProfPacketsThe value of sapEgQosPlcyQueueStatsForwardedInProfPackets
indicates the number of in-profile packets (rate below
CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.3 |
sapEgQosPlcyQueueStatsDroppedInProfPacketsThe value of sapEgQosPlcyQueueStatsDroppedInProfPackets
indicates the number of in-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.4 |
sapEgQosPlcyQueueStatsForwardedOutProfPacketsThe value of sapEgQosPlcyQueueStatsForwardedOutProfPackets
indicates the number of out-of-profile packets (rate
above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.5 |
sapEgQosPlcyQueueStatsDroppedOutProfPacketsThe value of sapEgQosPlcyQueueStatsDroppedOutProfPackets
indicates the number out-of-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.6 |
sapEgQosPlcyQueueStatsForwardedInProfOctetsThe value of sapEgQosPlcyQueueStatsForwardedInProfOctets
indicates the number ofin-profile octets (rate below CIR)
forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.7 |
sapEgQosPlcyQueueStatsDroppedInProfOctetsThe value of sapEgQosPlcyQueueStatsDroppedInProfOctets
indicates the number in-profile octets discarded by the
egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.8 |
sapEgQosPlcyQueueStatsForwardedOutProfOctetsThe value of sapEgQosPlcyQueueStatsForwardedOutProfOctets
indicates the number of out-of-profile octets (rate
above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.9 |
sapEgQosPlcyQueueStatsDroppedOutProfOctetsThe value of sapEgQosPlcyQueueStatsDroppedOutProfOctets
indicates the number out-of-profile octets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.10 |
sapEgQosPlcyQueueCustIdThe value of the object sapEgQosPlcyQueueCustId indicates
the Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.30.1.11 |
sapDhcpInfoTablesapDhcpInfoTable contains DHCP information related to a
routed CO subscriber SAP. This table complements
sapBaseInfoTable, and contains an entry for each
routed CO subscriber SAP. Rows in this table
are created and deleted automatically by the system. SEQUENCE OF SapDhcpInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.31 |
sapDhcpInfoEntryDHCP specific information for a routed CO subscriber SAP. SapDhcpInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.31.1 |
sapDhcpOperLeasePopulateThe value of the object sapDhcpOperLeasePopulate
indicates the number of DHCP lease states currently
allocated on this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.31.1.1 |
sapIngSchedPlcyStatsTableA table that contains ingress QoS queue
statistics for the SAP's, organized by
scheduler policy.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapIngSchedPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.32 |
sapIngSchedPlcyStatsEntryStatistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies. SapIngSchedPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.32.1 |
sapIngSchedPlcyStatsFwdPktThe number of forwarded packets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.32.1.1 |
sapIngSchedPlcyStatsFwdOctThe number of forwarded octets, as
determined by the SAP ingress scheduler
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.32.1.2 |
sapEgrSchedPlcyStatsTableA table that contains egress QoS scheduler
statistics for the SAP's, organized by
scheduler policy.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapEgrSchedPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.33 |
sapEgrSchedPlcyStatsEntryStatistics about a specific SAP's egress QoS scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies. SapEgrSchedPlcyStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.33.1 |
sapEgrSchedPlcyStatsFwdPktThe number of packets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.33.1.1 |
sapEgrSchedPlcyStatsFwdOctThe number of octets forwarded by the
egress Qchip, as determined by the SAP
egress scheduler policy.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.33.1.2 |
sapIngSchedPlcyPortStatsTableThe sapIngSchedPlcyPortStatsTable contains
ingress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapIngSchedPlcyPortStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.34 |
sapIngSchedPlcyPortStatsEntryStatistics about a specific SAP's ingress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies. SapIngSchedPlcyPortStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.34.1 |
sapIngSchedPlcyPortStatsPortThe value of sapIngSchedPlcyPortStatsPort is used
as an index of the ingress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.1 |
sapIngSchedPlcyPortStatsFwdPktThe value of sapIngSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.2 |
sapIngSchedPlcyPortStatsFwdOctThe value of sapIngSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
ingress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.34.1.3 |
sapEgrSchedPlcyPortStatsTableThe sapEgrSchedPlcyPortStatsTable contains
egress QoS scheduler statistics for the SAP's, organized per
scheduler policy and per port. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies.
Conceptual rows in this table are automatically created by
the system.
No row will be created for a SAP if the value of the object
sapTodSuite is equal to the empty string. SEQUENCE OF SapEgrSchedPlcyPortStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.35 |
sapEgrSchedPlcyPortStatsEntryStatistics about a specific SAP's egress Qos Scheduler.
Entries are created when a scheduler policy of a SAP
is replaced with another one due to Time-Of-Day policies. SapEgrSchedPlcyPortStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.35.1 |
sapEgrSchedPlcyPortStatsPortThe value of sapEgrSchedPlcyPortStatsPort is used
as an index of the egress QoS scheduler of this SAP. When
the SAP is an aps/ccag/lag in 'link' mode, this object is
the TmnxPortID of the member-port on which the scheduler is
applied. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.1 |
sapEgrSchedPlcyPortStatsFwdPktThe value of sapEgrSchedPlcyPortStatsFwdPkt indicates
the number of forwarded packets, as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.2 |
sapEgrSchedPlcyPortStatsFwdOctThe value of sapEgrSchedPlcyPortStatsFwdOct indicates
the number of forwarded octets,as determined by the SAP
egress scheduler policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.35.1.3 |
sapCemInfoTableA table that contains CEM SAP information. SEQUENCE OF SapCemInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.40 |
sapCemInfoEntryInformation about a specific CEM SAP. SapCemInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.40.1 |
sapCemLastMgmtChangeThe value of the object sapCemLastMgmtChange indicates
the value of sysUpTime at the time of the most recent
management-initiated change to this CEM SAP information.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.1 |
sapCemEndpointTypeThis object indicates the CEM SAP endpoint type.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.2 |
sapCemBitrateThis object indicates the bit-rate in multiples of
64 Kbit/s of the CEM SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.3 |
sapCemCasTrunkFramingThis object indicates the CAS trunk framing mode of
the CEM SAP.ro TdmOptionsCasTrunkFraming (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.4 |
sapCemPayloadSizeThis object specifies the payload size (in bytes) of
packets transmitted to the Packet Service Network (PSN)
by the CEM SAP. This determines the size of the data
that will be transmitted over the service. As well,
if the size of the data received is not consistent with
the payload size then the packet is considered malformed.
The default value depends on the CEM SAP endpoint type
(sapCemEndpointType), and if applicable, the number of
timeslots (sapCemBitrate):
-
| Endpoint Type | Timeslots | Default payload size |
-+-
| 'unstructuredE1' | n/a | 256 bytes |
-+-
| 'unstructuredT1' | n/a | 192 bytes |
-+-
| 'unstructuredE3' | n/a | 1024 bytes |
-+-
| 'unstructuredT3' | n/a | 1024 bytes |
-+-
| 'nxDS0' (E1/T1) | N = 1 | 64 bytes |
| +-
| | N = 2..4 | N x 32 bytes |
| +-
| | N = 5..15 | N x 16 bytes |
| +-
| | N >= 16 | N x 8 bytes |
-+-
| 'nxDS0WithCas' (E1)| N | N x 16 bytes |
-+-
| 'nxDS0WithCas' (T1)| N | N x 24 bytes |
-
For 'nxDS0WithCas', the sapCemPayloadSize cannot
be changed away from the default value.
For '1xDS0', sapCemPayloadSize must be a multiple of 2.
For 'NxDS0', where N > 1, sapCemPayloadSize must be a
multiple of the number of timeslots (sapCemBitrate).
For 'unstructuredE1', 'unstructuredT1', 'unstructuredE3'
and 'unstructuredT3', sapCemPayloadSize must be a
multiple of 32 bytes.
Configuring sapCemPayloadSize and sapCemJitterBuffer to
values that result in less than 2 packet buffers or
greater than 32 packet buffers is not allowed.
For all endpoint types except for 'nxDS0WithCas', the
minimum payload size is given below:
-
| Endpoint Type | Timeslots | Minimum payload size |
-+-
| 'unstructuredE1' | n/a | 256 bytes |
-+-
| 'unstructuredT1' | n/a | 192 bytes |
-+-
| 'unstructuredE3' | n/a | 1024 bytes |
-+-
| 'unstructuredT3' | n/a | 1024 bytes |
-+-
| 'nxDS0' (E1) | N = 1..4 | N x 16 bytes |
-+-
| 'nxDS0' (T1) | N = 1..4 | N x 24 bytes |
-+-
| 'nxDS0' (E1/T1) | N = 5..15 | N x 16 bytes |
| +-
| | N >= 16 | N x 8 bytes |
-+-
For all endpoints types except for 'nxDS0WithCas', the
maximum payload size is 2048 bytes.
Setting this object to 0 sets it back to the default
value.rw Unsigned32 (0|16..2048) UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.5 |
sapCemJitterBufferThis object specifies the jitter buffer size in
milliseconds (ms).
Default value depends on the CEM SAP endpoint type
(sapCemEndpointType), and if applicable, the number of
timeslots (sapCemBitrate):
-
| Endpoint Type | Timeslots | Default jitter buf. |
-+-
| 'unstructuredE1' | n/a | 5 ms |
-+-
| 'unstructuredT1' | n/a | 5 ms |
-+-
| 'unstructuredE3' | n/a | 5 ms |
-+-
| 'unstructuredT3' | n/a | 5 ms |
-+-
| 'nxDS0' (E1/T1) | N = 1 | 32 ms |
| +-
| | N = 2..4 | 16 ms |
| +-
| | N = 5..15 | 8 ms |
| +-
| | N >= 16 | 5 ms |
-+-
| 'nxDS0WithCas' (E1)| N | 8 ms |
-+-
| 'nxDS0WithCas' (T1)| N | 12 ms |
-
Configuring sapCemPayloadSize and sapCemJitterBuffer to
values that result in less than 2 packet buffers or
greater than 32 packet buffers is not allowed.
The valid range is 1 to 250 ms. Setting this object
to 0 sets it back to the default value.rw Unsigned32 (0|1..250) UNITS "milliseconds" .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.6 |
sapCemUseRtpHeaderThis object specifies whether a RTP header is used when
packets are transmitted to the Packet Service Network
(PSN) by the CEM SAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.7 |
sapCemDifferentialThis object specifies whether this CEM SAP is in
differential mode.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.8 |
sapCemTimestampFreqThis object specifies the value of the differential
timestamp frequency in multiples of 8 KHz for this CEM
SAP.ro Unsigned32 UNITS "8 KHz" .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.9 |
sapCemReportAlarmThe value of sapCemReportAlarm determines when and if to
generate notifications for the CEM SAP.rw CemSapReportAlarm (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.10 |
sapCemReportAlarmStatusThe value of sapCemReportAlarmStatus indicates the current
alarms on this CEM SAP.ro CemSapReportAlarm (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.11 |
sapCemLocalEcidThe value of the object sapCemLocalEcid specifies
the local ECID.
Only valid if CEM SAP belongs to an EPIPE service.rw CemSapEcid (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.12 |
sapCemRemoteMacAddrThe value of the object sapCemRemoteMacAddr specifies
the remote MAC address.
Only valid if CEM SAP belongs to an EPIPE service.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.13 |
sapCemRemoteEcidThe value of the object sapCemRemoteEcid specifies
the remote ECID.
Only valid if CEM SAP belongs to an EPIPE service.rw CemSapEcid (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.14 |
sapCemJitterBufPacketsThis value indicates the jitter buffer length in
number of packet buffers.ro Unsigned32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.15 |
sapCemPlayoutBufPacketsThresholdThis value indicates the playout buffer packets threshold
in number of packet buffers.ro Unsigned32 UNITS "packets" .1.3.6.1.4.1.6527.3.1.2.4.3.40.1.16 |
sapCemStatsTableA table that contains CEM SAP statistics. SEQUENCE OF SapCemStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.41 |
sapCemStatsEntryStatistics for a specific CEM SAP. SapCemStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.41.1 |
sapCemStatsIngressForwardedPktsThe value of sapCemStatsIngressForwardedPkts indicates
the number of packets that were successfully forwarded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.1 |
sapCemStatsIngressDroppedPktsThe value of sapCemStatsIngressDroppedPkts indicates
the total number of packets that were dropped due to
errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.2 |
sapCemStatsEgressForwardedPktsThe value of sapCemStatsEgressForwardedPkts indicates the
number of packets that were successfully forwarded.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.3 |
sapCemStatsEgressDroppedPktsThe value of sapCemStatsEgressDroppedPkts indicates
the total number of packets that were dropped due to
errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.4 |
sapCemStatsEgressMissingPktsThe value of sapCemStatsEgressMissingPkts indicates the
number of missing packets (as detected via control word
sequence number gaps).ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.5 |
sapCemStatsEgressPktsReOrderThe value of sapCemStatsEgressPktsReOrder indicates the
number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.6 |
sapCemStatsEgressJtrBfrUnderrunsThe value of sapCemStatsEgressJtrBfrUnderruns indicates
the number of times a packet needed to be played out and
the jitter buffer was empty.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.7 |
sapCemStatsEgressJtrBfrOverrunsThe value of sapCemStatsEgressJtrBfrOverruns indicates
the number of times a packet was dropped because it could
not fit in the jitter buffer.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.8 |
sapCemStatsEgressMisOrderDroppedThe value of sapCemStatsEgressMisOrderDropped indicates
the number of packets detected out of order (via control
word sequence numbers), and could not be re-ordered, or
could not be placed in the jitter buffer because it was
out of the current window.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.9 |
sapCemStatsEgressMalformedPktsThe value of sapCemStatsEgressMalformedPkts indicates the
number of packets detected with unexpected size, or bad
headers' stack.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.10 |
sapCemStatsEgressLBitDroppedThe value of sapCemStatsEgressLBitDropped indicates the
number of packets dropped due to the L bit set by the far
end.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.11 |
sapCemStatsEgressMultipleDroppedThe value of sapCemStatsEgressMultipleDropped indicates
the number of packets dropped due to multiple sequence
numbers.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.12 |
sapCemStatsEgressESsThe value of sapCemStatsEgressESs indicates the number of
Error Seconds (ESs) encountered. Any malformed packet,
seq. error, LOPS and similar are considered as error
seconds.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.13 |
sapCemStatsEgressSESsThe value of sapCemStatsEgressSESs indicates the number
of Severely Error Seconds (SESs) encountered. This is
when more than 30 percent of the packets within a one
second window are missing.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.14 |
sapCemStatsEgressUASsThe value of sapCemStatsEgressUASs indicates the number of
Unavailable Seconds (UASs) encountered. Any consecutive
ten seconds of SESs are counted as one UAS.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.15 |
sapCemStatsEgressFailureCountsThe value of sapCemStatsEgressFailureCounts indicates
the number failure events. A failure event begins when
the LOPS failure is declared, and ends when the failure
is cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.16 |
sapCemStatsEgressUnderrunCountsThe value of sapCemStatsEgressUnderrunCounts indicates
the number of times the jitter buffer went into an
underrun state.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.17 |
sapCemStatsEgressOverrunCountsThe value of sapCemStatsEgressOverrunCounts indicates
the number of times the jitter buffer went into an
overrun state.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.18 |
sapCemStatsEgressJtrBfrDepthThe value of sapCemStatsEgressJtrBfrDepth indicates
the current packet depth of the jitter buffer.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.41.1.19 |
sapTlsL2ptStatsTableA table that contains SAP Layer 2 Protocol Tunneling
Statistics.
This table complements sapTlsInfoTable. Rows in this
table are created and deleted automatically by the
system. SEQUENCE OF SapTlsL2ptStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.42 |
sapTlsL2ptStatsEntryLayer 2 Protocol Tunneling Statistics for a specific SAP.
The statistics are provided for each combination of
Destination Address and LLC SNAP type. SapTlsL2ptStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.42.1 |
sapTlsL2ptStatsLastClearedTimeThe value of sapTlsL2ptStatsLastClearedTime indicates
the last time that these stats were cleared. The value
zero indicates that they have not been cleared yet.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.1 |
sapTlsL2ptStatsL2ptEncapStpConfigBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusRx indicates the
number of L2PT encapsulated STP config bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.2 |
sapTlsL2ptStatsL2ptEncapStpConfigBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpConfigBpdusTx indicates the
number of L2PT encapsulated STP config bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.3 |
sapTlsL2ptStatsL2ptEncapStpRstBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpRstBpdusRx indicates the
number of L2PT encapsulated STP rst bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.4 |
sapTlsL2ptStatsL2ptEncapStpRstBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpRstBpdusTx indicates the
number of L2PT encapsulated STP rst bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.5 |
sapTlsL2ptStatsL2ptEncapStpTcnBpdusRxThe value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusRx indicates the
number of L2PT encapsulated STP tcn bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.6 |
sapTlsL2ptStatsL2ptEncapStpTcnBpdusTxThe value of sapTlsL2ptStatsL2ptEncapStpTcnBpdusTx indicates the
number of L2PT encapsulated STP tcn bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.7 |
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusRx indicates the
number of L2PT encapsulated PVST config bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.8 |
sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstConfigBpdusTx indicates the
number of L2PT encapsulated PVST config bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.9 |
sapTlsL2ptStatsL2ptEncapPvstRstBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusRx indicates the
number of L2PT encapsulated PVST rst bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.10 |
sapTlsL2ptStatsL2ptEncapPvstRstBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstRstBpdusTx indicates the
number of L2PT encapsulated PVST rst bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.11 |
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusRx indicates the
number of L2PT encapsulated PVST tcn bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.12 |
sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPvstTcnBpdusTx indicates the
number of L2PT encapsulated PVST tcn bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.13 |
sapTlsL2ptStatsStpConfigBpdusRxThe value of sapTlsL2ptStatsStpConfigBpdusRx indicates the
number of STP config bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.14 |
sapTlsL2ptStatsStpConfigBpdusTxThe value of sapTlsL2ptStatsStpConfigBpdusTx indicates the
number of STP config bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.15 |
sapTlsL2ptStatsStpRstBpdusRxThe value of sapTlsL2ptStatsStpRstBpdusRx indicates the
number of STP rst bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.16 |
sapTlsL2ptStatsStpRstBpdusTxThe value of sapTlsL2ptStatsStpRstBpdusTx indicates the
number of STP rst bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.17 |
sapTlsL2ptStatsStpTcnBpdusRxThe value of sapTlsL2ptStatsStpTcnBpdusRx indicates the
number of STP tcn bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.18 |
sapTlsL2ptStatsStpTcnBpdusTxThe value of sapTlsL2ptStatsStpTcnBpdusTx indicates the
number of STP tcn bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.19 |
sapTlsL2ptStatsPvstConfigBpdusRxThe value of sapTlsL2ptStatsPvstConfigBpdusRx indicates the
number of PVST config bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.20 |
sapTlsL2ptStatsPvstConfigBpdusTxThe value of sapTlsL2ptStatsPvstConfigBpdusTx indicates the
number of PVST config bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.21 |
sapTlsL2ptStatsPvstRstBpdusRxThe value of sapTlsL2ptStatsPvstRstBpdusRx indicates the
number of PVST rst bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.22 |
sapTlsL2ptStatsPvstRstBpdusTxThe value of sapTlsL2ptStatsPvstRstBpdusTx indicates the
number of PVST rst bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.23 |
sapTlsL2ptStatsPvstTcnBpdusRxThe value of sapTlsL2ptStatsPvstTcnBpdusRx indicates the
number of PVST tcn bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.24 |
sapTlsL2ptStatsPvstTcnBpdusTxThe value of sapTlsL2ptStatsPvstTcnBpdusTx indicates the
number of PVST tcn bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.25 |
sapTlsL2ptStatsOtherBpdusRxThe value of sapTlsL2ptStatsOtherBpdusRx indicates the
number of other bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.26 |
sapTlsL2ptStatsOtherBpdusTxThe value of sapTlsL2ptStatsOtherBpdusTx indicates the
number of other bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.27 |
sapTlsL2ptStatsOtherL2ptBpdusRxThe value of sapTlsL2ptStatsOtherL2ptBpdusRx indicates the
number of other L2PT bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.28 |
sapTlsL2ptStatsOtherL2ptBpdusTxThe value of sapTlsL2ptStatsOtherL2ptBpdusTx indicates the
number of other L2PT bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.29 |
sapTlsL2ptStatsOtherInvalidBpdusRxThe value of sapTlsL2ptStatsOtherInvalidBpdusRx indicates the
number of other invalid bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.30 |
sapTlsL2ptStatsOtherInvalidBpdusTxThe value of sapTlsL2ptStatsOtherInvalidBpdusTx indicates the
number of other invalid bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.31 |
sapTlsL2ptStatsL2ptEncapCdpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapCdpBpdusRx indicates the
number of L2PT encapsulated CDP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.32 |
sapTlsL2ptStatsL2ptEncapCdpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapCdpBpdusTx indicates the
number of L2PT encapsulated CDP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.33 |
sapTlsL2ptStatsL2ptEncapVtpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapVtpBpdusRx indicates the
number of L2PT encapsulated VTP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.34 |
sapTlsL2ptStatsL2ptEncapVtpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapVtpBpdusTx indicates the
number of L2PT encapsulated VTP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.35 |
sapTlsL2ptStatsL2ptEncapDtpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapDtpBpdusRx indicates the
number of L2PT encapsulated DTP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.36 |
sapTlsL2ptStatsL2ptEncapDtpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapDtpBpdusTx indicates the
number of L2PT encapsulated DTP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.37 |
sapTlsL2ptStatsL2ptEncapPagpBpdusRxThe value of sapTlsL2ptStatsL2ptEncapPagpBpdusRx indicates the
number of L2PT encapsulated PAGP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.38 |
sapTlsL2ptStatsL2ptEncapPagpBpdusTxThe value of sapTlsL2ptStatsL2ptEncapPagpBpdusTx indicates the
number of L2PT encapsulated PAGP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.39 |
sapTlsL2ptStatsL2ptEncapUdldBpdusRxThe value of sapTlsL2ptStatsL2ptEncapUdldBpdusRx indicates the
number of L2PT encapsulated UDLD bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.40 |
sapTlsL2ptStatsL2ptEncapUdldBpdusTxThe value of sapTlsL2ptStatsL2ptEncapUdldBpdusTx indicates the
number of L2PT encapsulated UDLD bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.41 |
sapTlsL2ptStatsCdpBpdusRxThe value of sapTlsL2ptStatsCdpBpdusRx indicates the
number of CDP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.42 |
sapTlsL2ptStatsCdpBpdusTxThe value of sapTlsL2ptStatsCdpBpdusTx indicates the
number of CDP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.43 |
sapTlsL2ptStatsVtpBpdusRxThe value of sapTlsL2ptStatsVtpBpdusRx indicates the
number of VTP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.44 |
sapTlsL2ptStatsVtpBpdusTxThe value of sapTlsL2ptStatsVtpBpdusTx indicates the
number of VTP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.45 |
sapTlsL2ptStatsDtpBpdusRxThe value of sapTlsL2ptStatsDtpBpdusRx indicates the
number of DTP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.46 |
sapTlsL2ptStatsDtpBpdusTxThe value of sapTlsL2ptStatsDtpBpdusTx indicates the
number of DTP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.47 |
sapTlsL2ptStatsPagpBpdusRxThe value of sapTlsL2ptStatsPagpBpdusRx indicates the
number of PAGP bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.48 |
sapTlsL2ptStatsPagpBpdusTxThe value of sapTlsL2ptStatsPagpBpdusTx indicates the
number of PAGP bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.49 |
sapTlsL2ptStatsUdldBpdusRxThe value of sapTlsL2ptStatsUdldBpdusRx indicates the
number of UDLD bpdus received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.50 |
sapTlsL2ptStatsUdldBpdusTxThe value of sapTlsL2ptStatsUdldBpdusTx indicates the
number of UDLD bpdus transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.42.1.51 |
sapEthernetInfoTableA table that contains Ethernet SAP information. SEQUENCE OF SapEthernetInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.43 |
sapEthernetInfoEntryInformation about a specific Ethernet SAP. SapEthernetInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.43.1 |
sapEthernetLLFAdminStatussapEthernetLLFAdminStatus specifies whether or not Link-
Loss Forwarding is enabled ('up'). When this object is set
to 'up' the underlying port will be forced into the
operationally 'down' state if the service is operationally
'down', or any of the 'sdpBindPwPeerStatusBits' are set,
and will set the underlying port's
tmnxPortEtherReasonDownFlags 'linklossFwd' bit. Setting
this object to 'down' will clear the 'linklossFwd' reason.
sapEthernetLLFAdminStatus can only be enabled on saps
configured for an EPIPE service using an Ethernet
port with the tmnxPortEncapType set to 'nullEncap.'rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.43.1.1 |
sapEthernetLLFOperStatussapEthernetLLFOperStatus indicates whether or not the
underlying port is forced operationally 'down' due to the
service being operationally 'down' or an
sdpBindPwPeerStatusBits bit is set.
sapEthernetLLFOperStatus is set to 'fault' when the
sapEthernetLLFAdminStatus is set to 'up,' and either a
fault has occurred on the pseudo-wire, or the service is
down, otherwise sapEthernetLLFOperStatus is set to 'clear.'ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.43.1.2 |
msapPlcyTableThe msapPlcyTable has an entry for each managed SAP(MSAP) policy
configured in the system. SEQUENCE OF MsapPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.44 |
msapPlcyEntryEach entry represents the configuration for a managed SAP(MSAP) policy.
The values for each entry will be used to populate the following
tables when the MSAP policy is applied to a MSAP:
TIMETRA-SAP-MIB::sapBaseInfoTable
TIMETRA-SAP-MIB::sapSubMgmtInfoTable MsapPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.44.1 |
msapPlcyNameThe value of msapPlcyName specifies the name of the MSAP policy. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.1 |
msapPlcyRowStatusThe value of msapPlcyRowStatus is used for the creation
and deletion of MSAP policies.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.2 |
msapPlcyLastChangedThe value of msapPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.3 |
msapPlcyDescriptionThe value of msapPlcyDescription specifies the description
of the MSAP policy.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.4 |
msapPlcyCpmProtPolicyIdThe value of msapPlcyCpmProtPolicyId specifies a CPM Protection
policy for the MSAP policy.
If a corresponding policy is not defined in
TIMETRA-SECURITY-MIB::tmnxCpmProtPolTable, an 'inconsistentValue'
error will be returned.
A value of 254 specifies that the default CPM Protection
policy is associated with the Managed SAP.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. An attempt to set msapPlcyCpmProtPolicyId to a non-zero
value on one of these unsupported chassis types will return
an 'inconsistentValue' error.rw TCpmProtPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.5 |
msapPlcyCpmProtMonitorMacThe value of msapPlcyCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy,
as specified by msapPlcyCpmProtPolicyId, must be applied.
If the value of msapPlcyCpmProtMonitorMac is 'true', the
per-source rate limit must be applied.
If the value of msapPlcyCpmProtPolicyId is equal to zero,
the value of msapPlcyCpmProtMonitorMac is irrelevant and
will be ignored.
This object is not supported on SR-1 and ESS-1, where the
value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5',
and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is
'7' or '9'. An attempt to set msapPlcyCpmProtMonitorMac to 'true'
on one of these unsupported chassis types will return an
'inconsistentValue' error.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.6 |
msapPlcySubMgmtDefSubIdThe value of msapPlcySubMgmtDefSubId specifies what will be used as
the default subscriber identification applicable on the MSAP.
This value is used in case no other source (like Radius) provides a
subscriber identification string.
If the value of this object is set to 'useSapId', the SAP-id will
be used as the default subscriber identification string. In this case,
msapPlcySubMgmtDefSubIdStr must contain the empty string, so any
non-empty string in msapPlcySubMgmtDefSubIdStr will be set to an empty
string.
If the value of this object is set to 'useAutoId',
the auto-generated subscriber identification string, as defined in
tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber
identification string. In this case, msapPlcySubMgmtDefSubIdStr
must contain the empty string, so any non-empty string in
msapPlcySubMgmtDefSubIdStr will be set to an empty string.
If the value of this object is set to 'useString', the value of
msapPlcySubMgmtDefSubIdStr will be used as the default subscriber
identification string. In this case, an empty msapPlcySubMgmtDefSubIdStr
means that there is no default subscriber identification configured.rw TmnxDefSubIdSource (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.7 |
msapPlcySubMgmtDefSubIdStrThe value of msapPlcySubMgmtDefSubIdStr specifies the default
subscriber identification string applicable on this MSAP.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.8 |
msapPlcySubMgmtDefSubProfileThe value of msapPlcySubMgmtDefSubProfile specifies the default
subscriber profile applicable on the MSAP.
If a corresponding profile is not defined in tmnxSubProfileTable, an
'inconsistentValue' error will be returned.
A value of 'default' is not allowed for this object.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.9 |
msapPlcySubMgmtDefSlaProfileThe value of msapPlcySubMgmtDefSlaProfile specifies the default SLA
profile applicable on the MSAP.
If a corresponding profile is not defined in tmnxSLAProfileTable, an
'inconsistentValue' error will be returned.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.10 |
msapPlcySubMgmtDefAppProfileThe value of msapPlcySubMgmtDefAppProfile specifies the default
application profile applicable on the MSAP.
If a corresponding profile is not defined in
TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable, an 'inconsistentValue'
error will be returned.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.11 |
msapPlcySubMgmtSubIdPlcyThe value of msapPlcySubMgmtSubIdPlcy specifies the subscriber
identification policy applicable on the MSAP.
If a corresponding profile is not defined in tmnxSubIdentPolicyTable,
an 'inconsistentValue' error will be returned.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.12 |
msapPlcySubMgmtSubscriberLimitThe value of msapPlcySubMgmtSubscriberLimit specifies the
maximum number of subscribers allowed for the MSAP.
A value is 0 means there is no limit.
The values for the objects msapPlcySubMgmtProfiledTrafOnly,
msapPlcySubMgmtNonSubTrafSubProf, and
msapPlcySubMgmtNonSubTrafSlaProf are only meaningful when
the value of msapPlcySubMgmtSubscriberLimit is 1 and will not
be used when the value of msapPlcySubMgmtSubscriberLimit is
not 1.rw TmnxSapSubscriberLimit .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.13 |
msapPlcySubMgmtProfiledTrafOnlyThe value of msapPlcySubMgmtProfiledTrafOnly specifies
whether only profiled traffic is applicable for the MSAP.
If set to 'true', the MSAP queues will be deleted.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.14 |
msapPlcySubMgmtNonSubTrafSubIdThe value of msapPlcySubMgmtNonSubTrafSubId specifies the
subscriber identification applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.15 |
msapPlcySubMgmtNonSubTrafSubProfThe value of msapPlcySubMgmtNonSubTrafSubProf specifies the
subscriber profile applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.16 |
msapPlcySubMgmtNonSubTrafSlaProfThe value of msapPlcySubMgmtNonSubTrafSlaProf specifies the
SLA profile applicable on the MSAP for all non-subscriber
traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.17 |
msapPlcySubMgmtNonSubTrafAppProfThe value of msapPlcySubMgmtNonSubTrafAppProf specifies the
Application profile applicable on the MSAP for all
non-subscriber traffic.
The value of this object is only meaningful if
msapPlcySubMgmtSubscriberLimit is set to 1.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.18 |
msapPlcyAssociatedMsapsThe value of msapPlcyAssociatedMsaps indicates the
number of MSAPs associated with this MSAP policy.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.19 |
msapPlcySubMgmtDefInterDestIdThe value of msapPlcySubMgmtDefInterDestId specifies what will be
used as the default intermediate destination identifier applicable
on the MSAP.
This value is used in case no other source (like Radius) provides an
intermediate destination identifier.
If the value of this object is set to 'useString', the value of
msapPlcySubMgmtDefInterDestIdStr will be used as the default
intermediate destination identifier. In this case, an empty
msapPlcySubMgmtDefInterDestIdStr means that there is no default
intermediate destination identifier configured.
If the value of this object is set to 'useTopQTag', the top q-tag of
the MSAP will be used as the default intermediate destination
identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must
contain the empty string.
If the value of this object is set to 'useVpi', the ATM VPI of
the MSAP will be used as the default intermediate destination
identifier. In this case, msapPlcySubMgmtDefInterDestIdStr must
contain the empty string.rw TmnxDefInterDestIdSource (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.20 |
msapPlcySubMgmtDefInterDestIdStrThe value of msapPlcySubMgmtDefSubIdStr specifies the default
subscriber identification string applicable on this MSAP.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.21 |
msapPlcyIgmpTrkExpiryTimeThe value of msapPlcyIgmpTrkExpiryTime specifies
the time in seconds that this system continues to track an inactive
host.
The value zero specifies that the value must be set to the actual
value of the object svcIgmpTrkExpiryTime of the service an MSAP
belongs to.rw Unsigned32 (0|1..65535) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.22 |
msapPlcyIgmpTrkImportPlcyThe value of the object msapPlcyIgmpTrkImportPlcy specifies
the policy statement that must be applied to all
incoming IGMP messages on the MSAP.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.23 |
msapPlcyIgmpTrkMaxNbrGrpsThe value of the object msapPlcyIgmpTrkMaxNbrGrps specifies
how many group addresses are allowed for the MSAP.
The value 0 means that no limit is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.24 |
msapPlcyIgmpTrkMaxNbrSrcsThe value of the object msapPlcyIgmpTrkMaxNbrSrcs specifies
how many source addresses are allowed per group address for the MSAP.
The value 0 means that no limit is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.25 |
msapPlcySubMgmtDefFilterProfileThe value of msapPlcySubMgmtDefFilterProfile specifies the default
filter profile applicable on the MSAP.
The specified filter profile needs to exists in the
TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.44.1.26 |
msapTlsPlcyTableThe msapTlsPlcyTable has an entry for each managed SAP (MSAP)
policy configured in the system. SEQUENCE OF MsapTlsPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.45 |
msapTlsPlcyEntryEach entry represents the VPLS-related configuration for a managed
SAP (MSAP) policy.
The values for each entry will be used to populate the following
VPLS-related tables when the MSAP policy is applied to a MSAP:
TIMETRA-SAP-MIB::sapTlsInfoTable
TIMETRA-SAP-MIB::sapTlsDhcpInfoTable
ALCATEL-IGMP-SNOOPING-MIB::tlsIgmpSnpgConfigTable MsapTlsPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.45.1 |
msapTlsPlcyLastChangedThe value of msapTlsPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.1 |
msapTlsPlcySplitHorizonGrpThe value of msapTlsPlcySplitHorizonGrp specifies the name of the
split-horizon group for the MSAP.
If the name specified does not correspond to a tlsShgInfoEntry
for the VPLS service, the creation of the MSAP will fail.
Additionally, if msapTlsPlcySplitHorizonGrp is set to a new value,
the sapSplitHorizonGrp object for any existing MSAPs created by
this policy will not be updated.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.2 |
msapTlsPlcyArpReplyAgentThe value of msapTlsPlcyArpReplyAgent specifies the status of the special
ARP response mechanism in the system for ARP requests destined to
static or dynamic hosts associated with the MSAP.
'disabled' - the ARP reply function is not operational
'enabled' - the ARP reply function is enabled without
subscriber identification.
'enabledWithSubscrIdent' - the ARP reply function is enabled
with subscriber identification.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.3 |
msapTlsPlcySubMgmtMacDaHashingThe value of msapTlsPlcySubMgmtMacDaHashing specifies whether
subscriber traffic egressing a LAG MSAP has its egress LAG
link selected by a function of the MAC destination address
instead of subscriber id.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.4 |
msapTlsPlcyDhcpLeasePopulateThe value of msapTlsPlcyDhcpLeasePopulate specifies the maximum number of
DHCP lease states allowed on the MSAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.5 |
msapTlsPlcyDhcpPrxyAdminStateThe value of msapTlsPlcyDhcpPrxyAdminState specifies the desired
administrative state of the proxy server on the interface.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.6 |
msapTlsPlcyDhcpPrxyServAddrTypeThe value of msapTlsPlcyDhcpPrxyServAddrType specifies the address type
of msapTlsPlcyDhcpPrxyServAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.7 |
msapTlsPlcyDhcpPrxyServAddrThe value of msapTlsPlcyDhcpPrxyServAddr specifies the IP address of the
which will be used as the source address of the emulated DHCP server
in the context of the VPLS MSAP.
This address is mandatory for the proxy server capability and it
should be in the context of the subnet represented by the VPLS.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.8 |
msapTlsPlcyDhcpPrxyLeaseTimeThe value of msapTlsPlcyDhcpPrxyLeaseTime specifies, in seconds, how long
a DHCP client is allowed to use the offered IP address.
A value of 0 means the lease time provided by a RADIUS or an upstream
DHCP server will not be overridden. A value of
7 days (315446399 seconds) is used when RADIUS does not provide a
lease time.rw Unsigned32 (0|300..315446399) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.9 |
msapTlsPlcyDhcpPrxyLTRadOverrideThe value of msapTlsPlcyDhcpPrxyLTRadOverride specifies whether or not the
lease time provided by the RADIUS server is presented to the DHCP
client.
By default the proxy-server will always make use of
msapTlsPlcyDhcpPrxyLeaseTime, regardless of what lease time information is
provided from the RADIUS server. When msapTlsPlcyDhcpPrxyLTRadOverride is
set to 'true', the proxy-server will use the lease time
information provided by the RADIUS server, regardless of the
configured lease time.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.10 |
msapTlsPlcyDhcpInfoActionThe value of msapTlsPlcyDhcpInfoAction specifies the DHCP option
reforwarding policy:
'replace' - replace existing information with configured
information
'drop' - discard messages with existing relay information if the
option-82 information is also present
'keep' - retain the existing relay informationrw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.11 |
msapTlsPlcyDhcpCircuitIdThe value of msapTlsPlcyDhcpCircuitId specifies whether or not the
circuit-id suboption is present, and if it is present what
information goes in it:
none - the circuit-id suboption will not be part of
the information option (Option 82).
asciiTuple - the ASCII-encoded concatenated tuple consisting
of the
- access-node-identifier
- service-id
- interface-name
is used.
vlanAsciiTuple - the format will include VLAN-id and dot1p bits
in addition to what is included in ascii-tuple
already. The format is supported on dot1q and
qinq encapsulated ports only. Thus, when the
option 82 bits are stripped, dot1p bits will be
copied to the Ethernet header of an outgoing
packet.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.12 |
msapTlsPlcyDhcpRemoteIdThe value of msapTlsPlcyDhcpRemoteId specifies what information goes into
the remote-id suboption in the DHCP Relay packet.
If the value of this object is set to 'none', the remote-id suboption
will not be part of the information option (Option 82).
If the value of this object is set to 'mac', the MAC address of the
remote end is encoded in the suboption.
If the value of this object is set to 'remote-id',
msapTlsPlcyDhcpRemoteIdString will represent the remote-id.
By default, the remote-id value is none.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.13 |
msapTlsPlcyDhcpRemoteIdStringThe value of msapTlsPlcyDhcpRemoteIdString specifies the remote-id. The
value of this object is ignored if msapTlsPlcyDhcpRemoteId does not
have the value of 'remote-id'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.14 |
msapTlsPlcyDhcpVendorInclOptsThe value of msapTlsPlcyDhcpVendorInclOpts specifies what is encoded
in the Alcatel-Lucent vendor specific sub-option of option 82.
The value of this object is only used when msapTlsPlcyDhcpInfoAction is
'replace'.rw Bits .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.15 |
msapTlsPlcyDhcpVendorOptStrThe value of msapTlsPlcyDhcpVendorOptStr specifies the string that goes
into the Alcatel-Lucent vendor specific sub-option of option 82.
This string is only used when msapTlsPlcyDhcpInfoAction is set to
'replace'.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.16 |
msapTlsPlcyEgressMcastGroupThe value of msapTlsPlcyEgressMcastGroup specifies the Egress Multicast
Group for the MSAP.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.17 |
msapTlsPlcyIgmpSnpgImportPlcyThe value of msapTlsPlcyIgmpSnpgImportPlcy specifies the policy statement
that is be applied to all incoming IGMP messages on the MSAP.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.18 |
msapTlsPlcyIgmpSnpgFastLeaveThe value of msapTlsPlcyIgmpSnpgFastLeave specifies
whether fast leave is allowed on this MSAP.
If set to 'enabled', the system prunes the port on which an IGMP
'leave' message has been received without waiting for the Group
Specific Query to timeout.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.19 |
msapTlsPlcyIgmpSnpgSendQueriesThe value of msapTlsPlcyIgmpSnpgSendQueries specifies
whether the system generates General Queries by itself on
the MSAP.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.20 |
msapTlsPlcyIgmpSnpgGenQueryIntvThe value of msapTlsPlcyIgmpSnpgGenQueryIntv specifies
the interval (in seconds) between two consecutive general queries sent
by the system on the MSAP.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.21 |
msapTlsPlcyIgmpSnpgQueryRespIntvThe value of msapTlsPlcyIgmpSnpgQueryRespIntv specifies
the maximum response time (in seconds) advertised in IGMPv2/v3
queries.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.22 |
msapTlsPlcyIgmpSnpgRobustCountThe value of msapTlsPlcyIgmpSnpgRobustCount specifies
the robustness variable on the MSAP.
This object allows tuning for the expected packet loss on the MSAP.
If a MSAP is expected to be lossy, the Robustness Variable may be
increased. IGMP snooping is robust to (Robustness Variable-1) packet
losses.
The value of this object is only meaningful when the value of
msapTlsPlcyIgmpSnpgSendQueries is 'enabled'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.23 |
msapTlsPlcyIgmpSnpgLastMembIntvlThe value of msapTlsPlcyIgmpSnpgLastMembIntvl specifies the
Max Response Time (in tenths of a second) used in
Group-Specific and Group-Source-Specific Queries sent in response
to 'leave' messages. This is also the amount of time between
Group-Specific Query messages.
This value may be tuned to modify the leave latency of the network.
A reduced value results in reduced time to detect the loss of the last
member of a group.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.24 |
msapTlsPlcyIgmpSnpgMaxNbrGrpsThe value of msapTlsPlcyIgmpSnpgMaxNbrGrps specifies how many group
addresses are allowed for the MSAP.
The value 0 means that no limit is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.25 |
msapTlsPlcyIgmpSnpgMvrFromVplsIdThe value of msapTlsPlcyIgmpSnpgMvrFromVplsId specifies from which
VPLS the multicast streams corresponding to the groups learned
via the MSAP are copied.
Groups which cannot be joined to the corresponding MVR VPLS
(because MVR is not up or the configured MVR policy rejects the group)
copy the multicast streams from the local VPLS if IGMP snooping is up
(i.e. tlsIgmpSnpgCfgAdminState is 'enabled').rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.26 |
msapTlsPlcyIgmpSnpgVersionThe value of msapTlsPlcyIgmpSnpgVersion specifies the version
of IGMP running on the MSAP.rw TmnxIgmpVersion (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.27 |
msapTlsPlcyIgmpSnpgMcacPlcyNameThe value of msapTlsPlcyIgmpSnpgMcacPlcyName specifies the name
of the multicast CAC (Connection Admission Control) policy.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.28 |
msapTlsPlcyIgmpSnpgMcacUncnstBWThe value of msapTlsPlcyIgmpSnpgMcacUncnstBW specifies the bandwidth
assigned for interface's multicast CAC policy traffic in kilo-bits per
second(kbps).
If the default value of '-1' is set, there is no constraint on
bandwidth allocated at the interface.
If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is set to '0' and if
a multicast CAC policy is assigned on the interface, then
no group (channel) from that policy is allowed on that interface.rw Integer32 (-1|0..2147483647) UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.29 |
msapTlsPlcyIgmpSnpgMcacPrRsvMnBWThe value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW specifies the bandwidth
pre-reserved for all the mandatory channels on a given interface
in kilo-bits per second(kbps).
If the value of msapTlsPlcyIgmpSnpgMcacUncnstBW is '0', no mandatory
channels are allowed. If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW
is '-1', then all mandatory and optional channels are allowed.
If the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW is equal to the
value of msapTlsPlcyIgmpSnpgMcacUncnstBW, then all the unconstrained
bandwidth on a given interface is allocated to mandatory channels
configured through multicast CAC policy on that interface and no
optional groups (channels) are allowed.
The value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW should always be less
than or equal to that of msapTlsPlcyIgmpSnpgMcacUncnstBW. An attempt
to set the value of msapTlsPlcyIgmpSnpgMcacPrRsvMnBW greater than
that of msapTlsPlcyIgmpSnpgMcacUncnstBW will result in
'inconsistentValue' error.rw Integer32 (-1|0..2147483647) UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.30 |
msapTlsPlcyArpHostMaxNumHostsThe value of msapTlsPlcyArpHostMaxNumHosts specifies the maximum
number of ARP hosts allowed on the TLS MSAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.31 |
msapTlsPlcyArpHostMinAuthIntvlThe value of msapTlsPlcyArpHostMinAuthIntvl specifies the minimum
interval between two consecutive authentication attempts for the
same ARP host.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.45.1.32 |
msapIgmpSnpgMcacLevelTableThe msapIgmpSnpgMcacLevelTable has an entry for each
multicast CAC policy constraint level configured for
a Managed SAP policy. SEQUENCE OF MSapIgmpSnpgMcacLevelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.46 |
msapIgmpSnpgMcacLevelEntryEach row entry represents a multicast CAC policy
bundle level constraints for a particular Managed
SAP policy. Entries are created and deleted by
the user. MSapIgmpSnpgMcacLevelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.46.1 |
msapIgmpSnpgMcacLevelIdThe value of msapIgmpSnpgMcacLevelId indicates
the level id of the multicast CAC policy bundle
constraint.
The value of level 1 has the highest priority and
level 8 the lowest. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.1 |
msapIgmpSnpgMcacLevelRowStatusThe value of msapIgmpSnpgMcacLevelRowStatus is
used for creation and deletion of level constraint
in a CAC for a Managed SAP policy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.2 |
msapIgmpSnpgMcacLevelLastChangedThe value of msapIgmpSnpgMcacLevelLastChanged indicates
the sysUpTime at the time of the last modification
of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.3 |
msapIgmpSnpgMcacLevelBWThe value of msapIgmpSnpgMcacLevelBW specifies
the bandwidth in kilo-bits per second (kbps) for
the level.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.46.1.4 |
msapIgmpSnpgMcacLagTableThe msapIgmpSnpgMcacLagTable has an entry for each lag
port configured for a multicast CAC policy bundle configured
for a Managed SAP policy. SEQUENCE OF MSapIgmpSnpgMcacLagEntry .1.3.6.1.4.1.6527.3.1.2.4.3.47 |
msapIgmpSnpgMcacLagEntryEach row entry represents a particular multicast CAC lag port
constraints for a Managed SAP policy.. Entries are
created and deleted by the user. MSapIgmpSnpgMcacLagEntry .1.3.6.1.4.1.6527.3.1.2.4.3.47.1 |
msapIgmpSnpgMcacLagPortsDownThe value of msapIgmpSnpgMcacLagPortsDown indicates
the configured number of ports in a lag group that are down.
If the number of ports available in the lag is reduced by the
number of ports configured for msapIgmpSnpgMcacLagPortsDown
object then bandwidth allowed for bundle will be updated to
the value of msapIgmpSnpgMcacLevelBW indexed by
msapIgmpSnpgMcacLagLevel value. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.1 |
msapIgmpSnpgMcacLagRowStatusThe value of msapIgmpSnpgMcacLagRowStatus is used for
creation and deletion of lag constraint in a CAC policy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.2 |
msapIgmpSnpgMcacLagLastChangedThe value of msapIgmpSnpgMcacLagLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.3 |
msapIgmpSnpgMcacLagLevelThe value of msapIgmpSnpgMcacLagLevel specifies the level
id to use when the value of msapIgmpSnpgMcacLagPortsDown
matches the actual number of ports down in a lag.
Using the value of msapIgmpSnpgMcacLagLevel as an index,
the operational MSAP unconstrained bandwidth will be set
to msapIgmpSnpgMcacLevelBW.
By default, for all lag constraints the link level will
be set to 1 at row creation.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.47.1.4 |
msapInfoTableA table that contains Managed SAP information. SEQUENCE OF MSapInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.48 |
msapInfoEntryInformation about a specific Managed SAP. MSapInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.48.1 |
msapInfoCreationSapPortEncapValThe value of msapInfoCreationSapPortEncapVal indicates
the port encapsulation value of the SAP with a sapSubType
value of 'capture' that created this MSAP.ro TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.1 |
msapInfoCreationPlcyNameThe value of msapInfoCreationPlcyName indicates
the value of the msapPlcyName object for MSAP policy
used to create this MSAP.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.2 |
msapInfoReEvalPolicyThe value of msapInfoReEvalPolicy specifies whether
to re-apply the Managed SAP policy associated with
this MSAP.
When a SET of this object is done with a value of
'doAction', the system will attempt to re-apply the
MSAP policy indicated by msapInfoCreationPlcyName.
If this action is successful, 'noError' will be returned.
If this action is unsuccessful, an 'inconsistentValue'
error will be returned. Attempting to SET this object with
a value of 'notApplicable' will have no effect and will
return 'noError'.
SNMP GET and GETNEXT requests on this object will
return 'notApplicable'.rw TmnxActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.3 |
msapInfoLastChangedThe value of msapInfoLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.48.1.4 |
msapCaptureSapStatsTableA table that contains statistics for SAPs
with a sapSubType value of 'capture'. SEQUENCE OF MSapCaptureSapStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.49 |
msapCaptureSapStatsEntryStatistics for a specific 'capture' SAP. MSapCaptureSapStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.49.1 |
msapCaptureSapStatsTriggerTypeThe value of msapCaptureSapStatsTriggerType indicates the
type of trigger packets this entry is for. Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.1 |
msapCaptureSapStatsPktsRecvdThe value of msapCaptureSapStatsPktsRecvd indicates the
number of packets received on this 'capture' SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.2 |
msapCaptureSapStatsPktsRedirectThe value of msapCaptureSapStatsPktsRedirect indicates the
number of packets redirected on this 'capture' SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.3 |
msapCaptureSapStatsPktsDroppedThe value of msapCaptureSapStatsPktsDropped indicates the
number of packets dropped on this 'capture' SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.49.1.4 |
sapTlsMrpTableThe sapTlsMrpTable augments sapTlsInfoTable with
attributes of the Multiple Registration Protocol (MRP)
feature for the TLS SAP. SEQUENCE OF SapTlsMrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.50 |
sapTlsMrpEntryMRP specific information about a SAP in a TLS. SapTlsMrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.50.1 |
sapTlsMrpRxPdusThe value of sapTlsMrpRxPdus indicates the number of MRP packets
received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.1 |
sapTlsMrpDroppedPdusThe value of sapTlsMrpDroppedPdus indicates the number of dropped MRP
packets on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.2 |
sapTlsMrpTxPdusThe value of sapTlsMrpTxPdus indicates the number of MRP packets
transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.3 |
sapTlsMrpRxNewEventThe value of sapTlsMrpRxNewEvent indicates the number of 'New' MRP
events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.4 |
sapTlsMrpRxJoinInEventThe value of sapTlsMrpRxJoinInEvent indicates the number of 'Join-In'
MRP events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.5 |
sapTlsMrpRxInEventThe value of sapTlsMrpRxInEvent indicates the number of 'In' MRP
events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.6 |
sapTlsMrpRxJoinEmptyEventThe value of sapTlsMrpRxJoinEmptyEvent indicates the number of
'Join Empty' MRP events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.7 |
sapTlsMrpRxEmptyEventThe value of sapTlsMrpRxEmptyEvent indicates the number of 'Empty'
MRP events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.8 |
sapTlsMrpRxLeaveEventThe value of sapTlsMrpRxLeaveEvent indicates the number of 'Leave'
MRP events received on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.9 |
sapTlsMrpTxNewEventThe value of sapTlsMrpTxNewEvent indicates the number of 'New' MRP
events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.10 |
sapTlsMrpTxJoinInEventThe value of sapTlsMrpTxJoinInEvent indicates the number of 'Join-In'
MRP events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.11 |
sapTlsMrpTxInEventThe value of sapTlsMrpTxInEvent indicates the number of 'In' MRP
events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.12 |
sapTlsMrpTxJoinEmptyEventThe value of sapTlsMrpTxJoinEmptyEvent indicates the number of
'Join Empty' MRP events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.13 |
sapTlsMrpTxEmptyEventThe value of sapTlsMrpTxEmptyEvent indicates the number of 'Empty'
MRP events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.14 |
sapTlsMrpTxLeaveEventThe value of sapTlsMrpTxLeaveEvent indicates the number of 'Leave'
MRP events transmitted on this SAP.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.50.1.15 |
sapTlsMmrpTableThis table contains an entry for each MAC address managed
by Multiple MAC Registration Protocol (MMRP) on the SAP
for the TLS. Entries are dynamically created and
destroyed by the system as the MAC Addresses are registered
or declared in MMRP. SEQUENCE OF SapTlsMmrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.51 |
sapTlsMmrpEntryMMRP specific information about a MAC address managed by
MMRP on a SAP in a TLS. SapTlsMmrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.51.1 |
sapTlsMmrpMacAddrThe value of sapTlsMmrpMacAddr indicates an ethernet MAC address which
is being managed by MMRP on this SAP. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.1 |
sapTlsMmrpDeclaredThe value of sapTlsMmrpDeclared indicates whether the MRP applicant
on this SAP is declaring this MAC address on behalf of MMRP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.2 |
sapTlsMmrpRegisteredThe value of sapTlsMmrpRegistered indicates whether the MRP registrant
on this SAP has notified MMRP of a registration of this MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.3 |
sapTlsMmrpEndStationThe value of sapTlsMmrpEndStation indicates whether the MRP registrant
on this SAP is registered per end station.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.51.1.4 |
sapIngQosHsmdaQueueTableThe sapIngQosHsmdaQueueTable has an entry for each Hsmda
SAP-level ingress queue override configured on the system.
This table is obsoleted in 10.0 release.obsolete SEQUENCE OF SapIngQosHsmdaQueueEntry .1.3.6.1.4.1.6527.3.1.2.4.3.52 |
sapIngQosHsmdaQueueEntryEach row entry represents a Hsmda SAP-level ingress queue
override record.
Entries are created and deleted via SNMP SET operations on
sapIngQosHsmdaQueueRowStatus.obsolete SapIngQosHsmdaQueueEntry .1.3.6.1.4.1.6527.3.1.2.4.3.52.1 |
sapIngQosHsmdaQueueIdThe value of sapIngQosHsmdaQueueId index specifies the Hsmda
egress queue which this override record will affect.obsolete TIngressHsmdaQueueId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.1 |
sapIngQosHsmdaQueueRowStatusThe value of sapIngQosHsmdaQueueRowStatus specifies...rwobsolete RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.2 |
sapIngQosHsmdaQueueLastChangedThe value of sapIngQosHsmdaQueueLastChanged indicates the sysUpTime
at the time of the most recent management-initiated change to this
table row.roobsolete TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.3 |
sapIngQosHsmdaQueueAdminPIRThe value of sapIngQosHsmdaQueueAdminPIR specifies the PIR rate in kbps
allowed for this Hsmda ingress queue.rwobsolete THsmdaPIRKRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.4 |
sapIngQosHsmdaQueueAdminCIRThe value of sapIngQosHsmdaQueueAdminCIR specifies the CIR rate in kbps
allowed for this Hsmda ingress queue.rwobsolete THsmdaCIRKRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.5 |
sapIngQosHsmdaQueueSlopePolicyThe value of sapIngQosHsmdaQueueSlopePolicy specifies the slope
policy that defines the RED slopes for this Hsmda ingress queue.rwobsolete TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.52.1.6 |
sapIngQosHsmdaQueueStatsTableA table that contains ingress QoS HSMDA queue SAP statistics.
This table is obsoleted in 10.0 release.obsolete SEQUENCE OF SapIngQosHsmdaQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.53 |
sapIngQosHsmdaQueueStatsEntryIngress statistics about a specific SAP's QoS HSMDA queue.obsolete SapIngQosHsmdaQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.53.1 |
sapIngHsmdaQStatCustIdThe value of sapIngHsmdaQStatCustId indicates the customer ID
for the statistics.roobsolete TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.1 |
sapIngHsmdaQStatHiPktsDroppedThe value of sapIngHsmdaQStatHiPktsDropped indicates the
number of high-priority packets dropped on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.2 |
sapIngHsmdaQStatLoPktsDroppedThe value of sapIngHsmdaQStatLoPktsDropped indicates the
number of low-priority packets dropped on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.3 |
sapIngHsmdaQStatHiOctsDroppedThe value of sapIngHsmdaQStatHiOctsDropped indicates the
number of high-priority octets dropped on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.4 |
sapIngHsmdaQStatLoOctsDroppedThe value of sapIngHsmdaQStatLoOctsDropped indicates the
number of low-priority octets dropped on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.5 |
sapIngHsmdaQStatInProfPktsFwdThe value of sapIngHsmdaQStatInProfPktsFwd indicates the
number of in-profile packets forwarded on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.6 |
sapIngHsmdaQStatOutProfPktsFwdThe value of sapIngHsmdaQStatOutProfPktsFwd indicates the
number of out-of-profile packets forwarded on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.7 |
sapIngHsmdaQStatInProfOctsFwdThe value of sapIngHsmdaQStatInProfOctsFwd indicates the
number of out-of-profile packets forwarded on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.8 |
sapIngHsmdaQStatOutProfOctsFwdThe value of sapIngHsmdaQStatOutProfOctsFwd indicates the
number of out-of-profile packets forwarded on ingress on
this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.9 |
sapIngHsmdaQStatAllPktsOfferedThe value of sapIngHsmdaQStatAllPktsOffered indicates the
total number of packets offered on ingress on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.10 |
sapIngHsmdaQStatAllOctsOfferedThe value of sapIngHsmdaQStatAllOctsOffered indicates the
total number of octets offered on ingress on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.53.1.11 |
sapIngQosHsmdaCntrStatsTableA table that contains ingress QoS HSMDA counter SAP statistics.
This table is obsoleted in 10.0 release.obsolete SEQUENCE OF SapIngQosHsmdaCntrStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.54 |
sapIngQosHsmdaCntrStatsEntryIngress statistics about a specific SAP's QoS HSMDA counter.obsolete SapIngQosHsmdaCntrStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.54.1 |
sapIngHsmdaCntrStCntrIdThe value of sapIngHsmdaCntrStCntrId indicates the counter ID
for the statistics.obsolete TIngressHsmdaCounterId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.1 |
sapIngHsmdaCntrStCustIdThe value of sapIngHsmdaCntrStCustId indicates the customer ID
for the statistics.roobsolete TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.2 |
sapIngHsmdaCntrStHiPktDropThe value of sapIngHsmdaCntrStHiPktDrop indicates the
number of high-priority packets dropped for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.3 |
sapIngHsmdaCntrStLoPktDropThe value of sapIngHsmdaCntrStLoPktDrop indicates the
number of low-priority packets dropped for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.4 |
sapIngHsmdaCntrStHiOctDropThe value of sapIngHsmdaCntrStHiOctDrop indicates the
number of high-priority octets dropped for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.5 |
sapIngHsmdaCntrStLoOctDropThe value of sapIngHsmdaCntrStLoOctDrop indicates the
number of low-priority octets dropped for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.6 |
sapIngHsmdaCntrStInProfPktFwdThe value of sapIngHsmdaCntrStInProfPktFwd indicates the
number of in-profile packets forwarded for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.7 |
sapIngHsmdaCntrStOutProfPktFwdThe value of sapIngHsmdaCntrStOutProfPktFwd indicates the
number of out-of-profile packets forwarded for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.8 |
sapIngHsmdaCntrStInProfOctFwdThe value of sapIngHsmdaCntrStInProfOctFwd indicates the
number of out-of-profile packets forwarded for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.9 |
sapIngHsmdaCntrStOutProfOctFwdThe value of sapIngHsmdaCntrStOutProfOctFwd indicates the
number of out-of-profile packets forwarded for the ingress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.10 |
sapIngHsmdaCntrStAllPktOfferedThe value of sapIngHsmdaCntrStAllPktOffered indicates the
total number of packets offered on ingress on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.11 |
sapIngHsmdaCntrStAllOctOfferedThe value of sapIngHsmdaCntrStAllOctOffered indicates the
total number of octets offered on ingress on this SAP.roobsolete Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.54.1.12 |
sapEgrQosHsmdaQueueTableThe sapEgrQosHsmdaQueueTable has an entry for each Hsmda
SAP-level egress queue override configured on the system. SEQUENCE OF SapEgrQosHsmdaQueueEntry .1.3.6.1.4.1.6527.3.1.2.4.3.55 |
sapEgrQosHsmdaQueueEntryEach row entry represents a Hsmda SAP-level egress queue
override record.
Entries are created and deleted via SNMP SET operations on
sapEgrQosHsmdaQueueRowStatus. SapEgrQosHsmdaQueueEntry .1.3.6.1.4.1.6527.3.1.2.4.3.55.1 |
sapEgrQosHsmdaQueueIdThe value of sapEgrQosHsmdaQueueId index specifies the Hsmda
egress queue which this override record will affect. TEgressHsmdaQueueId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.1 |
sapEgrQosHsmdaQueueRowStatusThe value of sapEgrQosHsmdaQueueRowStatus controls the creation
and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.2 |
sapEgrQosHsmdaQueueLastChangedThe value of sapEgrQosHsmdaQueueLastChanged indicates the sysUpTime
at the time of the most recent management-initiated change to this
table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.3 |
sapEgrQosHsmdaQueueAdminPIRThe value of sapEgrQosHsmdaQueueAdminPIR specifies the PIR rate in kbps
allowed for this Hsmda ingress queue.rw THsmdaPIRKRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.4 |
sapEgrQosHsmdaQueueAdminCIRThe value of sapEgrQosHsmdaQueueAdminCIR specifies the CIR rate in kbps
allowed for this Hsmda ingress queue.
This object is obsoleted in 10.0 Release.rwobsolete THsmdaCIRKRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.5 |
sapEgrQosHsmdaQueueSlopePolicyThe value of sapEgrQosHsmdaQueueSlopePolicy specifies the slope
policy that defines the RED slopes for this Hsmda ingress queue.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.6 |
sapEgrQosHsmdaQueueWrrWeightThe value of sapEgrQosHsmdaQueueWrrWeight specifies the weighted
round-robin weight override for the given egress hsmda queue on this
SAP. When set to default value, the weighted round-robin weight is not
overridden and the weighted round-robin weight from the sap-egress qos
policy is honored. When a non-default value is given, that is used
instead of the weighted round-robin weight given in the sap-egress
policy.rw THsmdaWrrWeightOverride (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.7 |
sapEgrQosHsmdaQueueMBSThe value of sapEgrQosHsmdaQueueMBS specifies the maximum buffer space
(MBS) override in bytes for the given egress hsmda queue on this SAP.
When set to default value, the MBS is not overridden and the MBS from
the sap-egress qos policy is honored. When a non-default value is
given, that is used instead of the MBS given in the sap-egress policy.rw THSMDABurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.55.1.8 |
sapEgrQosHsmdaQueueStatsTableA table that contains egress QoS HSMDA queue SAP statistics. SEQUENCE OF SapEgrQosHsmdaQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.56 |
sapEgrQosHsmdaQueueStatsEntryEgress statistics about a specific SAP's QoS HSMDA queue. SapEgrQosHsmdaQueueStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.56.1 |
sapEgrHsmdaQStatCustIdThe value of sapEgrHsmdaQStatCustId indicates the
customer ID for the statistics.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.1 |
sapEgrHsmdaQStatInProfPktFwdThe value of sapEgrHsmdaQStatInProfPktFwd indicates the
number of in-profile packets forwarded on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.2 |
sapEgrHsmdaQStatInProfPktDropdThe value of sapEgrHsmdaQStatInProfPktDropd indicates the
number of in-profile packets dropped on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.3 |
sapEgrHsmdaQStatOutProfPktFwdThe value of sapEgrHsmdaQStatOutProfPktFwd indicates the
number of out-of-profile packets forwarded on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.4 |
sapEgrHsmdaQStatOutProfPktDropdThe value of sapEgrHsmdaQStatOutProfPktDropd indicates the
number of out-of-profile packets dropped on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.5 |
sapEgrHsmdaQStatInProfOctFwdThe value of sapEgrHsmdaQStatInProfOctFwd indicates the
number of out-of-profile packets forwarded on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.6 |
sapEgrHsmdaQStatInProfOctDropdThe value of sapEgrHsmdaQStatInProfOctDropd indicates the
number of out-of-profile packets dropped on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.7 |
sapEgrHsmdaQStatOutProfOctFwdThe value of sapEgrHsmdaQStatOutProfOctFwd indicates the
number of out-of-profile packets forwarded on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.8 |
sapEgrHsmdaQStatOutProfOctDropdThe value of sapEgrHsmdaQStatOutProfOctDropd indicates the
number of out-of-profile packets dropped on egress on
this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.56.1.9 |
sapEgrQosHsmdaCntrStatsTableA table that contains egress QoS HSMDA counter SAP statistics. SEQUENCE OF SapEgrQosHsmdaCntrStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.57 |
sapEgrQosHsmdaCntrStatsEntryEgress statistics about a specific SAP's QoS HSMDA counter. SapEgrQosHsmdaCntrStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.57.1 |
sapEgrHsmdaCntrStCntrIdThe value of sapEgrHsmdaCntrStCntrId indicates the counter ID
for the statistics. TEgressHsmdaCounterId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.1 |
sapEgrHsmdaCntrStCustIdThe value of sapEgrHsmdaCntrStCustId indicates the customer ID
for the statistics.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.2 |
sapEgrHsmdaCntrStInProfPktFwdThe value of sapEgrHsmdaCntrStInProfPktFwd indicates the
number of in-profile packets forwarded for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.3 |
sapEgrHsmdaCntrStInProfPktDropThe value of sapEgrHsmdaCntrStInProfPktDrop indicates the
number of in-profile packets dropped for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.4 |
sapEgrHsmdaCntrStOutProfPktFwdThe value of sapEgrHsmdaCntrStOutProfPktFwd indicates the
number of out-of-profile packets forwarded for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.5 |
sapEgrHsmdaCntrStOutProfPktDropThe value of sapEgrHsmdaCntrStOutProfPktDrop indicates the
number of out-of-profile packets dropped for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.6 |
sapEgrHsmdaCntrStInProfOctFwdThe value of sapEgrHsmdaCntrStInProfOctFwd indicates the
number of out-of-profile packets forwarded for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.7 |
sapEgrHsmdaCntrStInProfOctDropThe value of sapEgrHsmdaCntrStInProfOctDrop indicates the
number of out-of-profile packets dropped for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.8 |
sapEgrHsmdaCntrStOutProfOctFwdThe value of sapEgrHsmdaCntrStOutProfOctFwd indicates the
number of out-of-profile packets forwarded for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.9 |
sapEgrHsmdaCntrStOutProfOctDropThe value of sapEgrHsmdaCntrStOutProfOctDrop indicates the
number of out-of-profile packets dropped for the egress
counter, specified by the index sapIngHsmdaCntrStCntrId,
on this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.57.1.10 |
msapL3PlcyTableThe msapL3PlcyTable has an entry for each managed SAP (MSAP)
policy configured in the system. SEQUENCE OF MsapL3PlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.58 |
msapL3PlcyEntryEach entry represents the L3-related configuration for a managed
SAP (MSAP) policy. MsapL3PlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.58.1 |
msapL3PlcyLastChangedThe value of msapL3PlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.58.1.1 |
msapL3PlcyAntiSpoofThe value of the object msapL3PlcyAntiSpoof specifies
the type of anti-spoof filtering applicable on this MSAP.
'nextHopIpAndMacAddr (4)' is not supported on SR-1, where
the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.58.1.2 |
msapPlcyTblLastChgdThe value of msapPlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapPlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.59 |
msapTlsPlcyTblLastChgdThe value of msapTlsPlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapTlsPlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.60 |
msapIgmpSnpgMcacLvlTblLastChgdThe value of msapIgmpSnpgMcacLvlTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapIgmpSnpgMcacLevelTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.61 |
msapIgmpSnpgMcacLagTblLastChgdThe value of msapIgmpSnpgMcacLagTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapIgmpSnpgMcacLagTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.62 |
msapInfoTblLastChgdThe value of msapInfoTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapInfoTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.63 |
msapL3PlcyTblLastChgdThe value of msapL3PlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapL3PlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.64 |
sapStaticHostMRtTblLastChgdThe value of sapStaticHostMRtTblLastChgd indicates the
sysUpTime at the time of the last modification of
sapStaticHostMRtTable.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.65 |
sapStaticHostMRtTableThe sapStaticHostMRtTable contains managed routes of
SAP static hosts.
Entries can be created and deleted via SNMP SET
operations. SEQUENCE OF SapStaticHostMRtEntry .1.3.6.1.4.1.6527.3.1.2.4.3.66 |
sapStaticHostMRtEntryEach row entry represents information on a specific
managed route. SapStaticHostMRtEntry .1.3.6.1.4.1.6527.3.1.2.4.3.66.1 |
sapStaticHostMRtAddrTypeThe value of sapStaticHostMRtAddrType indicates
the address type of sapStaticHostMRtAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.1 |
sapStaticHostMRtAddrThe value of sapStaticHostMRtAddr indicates
the IP address of the managed route. InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.2 |
sapStaticHostMRtPrefixLenThe value of sapStaticHostMRtPrefixLen indicates
the prefix length of the subnet associated with
sapStaticHostMRtAddr. InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.3 |
sapStaticHostMRtRowStatusThe value of sapStaticHostMRtRowStatus controls the
creation and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.4 |
sapStaticHostMRtLastMgmtChangeThe value of sapStaticHostMRtLastMgmtChange indicates the
value of sysUpTime at the time of the last management
change of any writable object of this row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.5 |
sapStaticHostMRtStatusThe value of svcDhcpManagedRouteStatus indicates
the state of this managed route.ro TmnxManagedRouteStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.66.1.6 |
sapTlsArpHostTableLastMgmtChangeThe value of sapTlsArpHostTableLastMgmtChange indicates the sysUpTime
at the time of the most recent management-initiated change to the
sapTlsArpHostTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.67 |
sapTlsArpHostTableA table that contains ARP host configuration
information about a SAP in a TLS. SEQUENCE OF SapTlsArpHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.68 |
sapTlsArpHostEntryARP host specific information about a SAP in a TLS. SapTlsArpHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.68.1 |
sapTlsArpHostLastMgmtChangeThe value of sapTlsArpHostLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this
table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.68.1.1 |
sapTlsArpHostAdminStateThe value of the object sapTlsArpHostAdminState specifies the
administrative state of the ARP host functionality on this TLS SAP.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.68.1.2 |
sapTlsArpHostMaxNumHostsThe value of sapTlsArpHostMaxNumHosts specifies the maximum
number of ARP hosts allowed on this TLS SAP.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.68.1.3 |
sapTlsArpHostMinAuthIntvlThe value of sapTlsArpHostMinAuthIntvl specifies the minimum
interval between two consecutive authentication attempts for the
same ARP host.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.68.1.4 |
sapIgmpTrkTableLastMgmtChangeThe value of sapIgmpTrkTableLastMgmtChange indicates the sysUpTime
at the time of the most recent management-initiated change to the
sapIgmpTrkTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.69 |
sapIgmpTrkTableA table that contains IGMP host tracking configuration
information about SAP's.
The system automatically creates an entry in this table
for each SAP where it creates a corresponding entry in the
sapSubMgmtInfoTable.
This means that all SAP's that support Enhanced Subscriber Management
have en entry in this table. SEQUENCE OF SapIgmpTrkEntry .1.3.6.1.4.1.6527.3.1.2.4.3.70 |
sapIgmpTrkEntryIGMP host tracking specific information about a SAP. SapIgmpTrkEntry .1.3.6.1.4.1.6527.3.1.2.4.3.70.1 |
sapIgmpTrkLastMgmtChangeThe value of sapIgmpTrkLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this
table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.1 |
sapIgmpTrkExpiryTimeThe value of sapIgmpTrkExpiryTime specifies
the time in seconds that this system continues to track an inactive
host.
The value zero specifies that the value must be set to the actual
value of the object svcIgmpTrkExpiryTime of the service this SAP
belongs to.rw Unsigned32 (0|1..65535) UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.2 |
sapIgmpTrkImportPlcyThe value of the object sapIgmpTrkImportPlcy specifies
the policy statement that must be applied to all
incoming IGMP messages on this SAP.rw TPolicyStatementNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.3 |
sapIgmpTrkMaxNbrGrpsThe value of the object sapIgmpTrkMaxNbrGrps specifies
how many group addresses are allowed for this SAP.
The value 0 means that no limit is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.4 |
sapIgmpTrkNbrGrpsThe value of the object sapIgmpTrkNbrGrps indicates
how many group addresses are tracked for this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.5 |
sapIgmpTrkMaxNbrSrcsThe value of the object sapIgmpTrkMaxNbrSrcs specifies
how many source addresses are allowed per group address for this SAP.
The value 0 means that no limit is imposed.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.6 |
sapIgmpTrkDisRtrAlertChksapIgmpTrkDisRtrAlertChk is used to enable/disable router
alert checking for IGMP messages received on this sap.
If this flag is set to 'true', checking is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.70.1.7 |
sapFrInfoTableA table that contains FR SAP information. SEQUENCE OF SapFrInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.71 |
sapFrInfoEntryInformation about a specific FR SAP. SapFrInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.71.1 |
sapFrInfoFrf12ModeThe value of sapFrInfoFrf12Mode enables or disables the
use of FRF12 headers. This must be set to disabled for this
entry to be added to a mlfr bundle.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.71.1.1 |
sapFrInfoSchedulingClassThe value of sapFrInfoSchedulingClass specifies the scheduling class
to use for this sap. This object is only applicable for a sapPortId
that has tmnxBundleType set to 'mlfr', sapFrInfoFrf12Mode SAPs set to
'enabled' or tmnxFrIntfFrf12Mode set to 'enabled' and
sapFrf12InfoInterleave set to 'disabled'.rw TmnxMcFrClassIndex (TIMETRA-QOS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.71.1.2 |
sapFrInfoLastChangedThe value of sapFrInfoLastChanged indicates the sysUpTime
at the time of the last modification of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.71.1.3 |
sapFrf12InfoTableA table that contains FRF12 SAP information. SEQUENCE OF SapFrf12InfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.74 |
sapFrf12InfoEntryInformation about a specific FR SAP. SapFrf12InfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.74.1 |
sapFrf12InfoFragmentThresholdThe value of sapFrf12InfoFragmentThreshold specifies the maximum
length of a fragment to be transmitted.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.74.1.1 |
sapFrf12InfoLastChangedThe value of sapFrf12InfoLastChanged indicates the sysUpTime
at the time of the last modification of this entry..ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.74.1.2 |
sapFrf12InfoInterleaveThe value of sapFrf12InfoInterleave specifies whether or not FRF12
interleave is enabled. If enabled, sapFrInfoSchedulingClass is not
applicable.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.74.1.3 |
sapArpHostStatTableA table that contains ARP host status and statistics
information about SAP's. SEQUENCE OF SapArpHostStatEntry .1.3.6.1.4.1.6527.3.1.2.4.3.75 |
sapArpHostStatEntryARP host specific status and statistics information about a SAP. SapArpHostStatEntry .1.3.6.1.4.1.6527.3.1.2.4.3.75.1 |
sapArpHostStatLastClearedTimeThe value of sapArpHostStatLastClearedTime indicates
the last time that these stats were cleared.
The value zero indicates that they have not been cleared yet.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.1 |
sapArpHostStatNumHostsThe value of sapArpHostStatNumHosts indicates
the actual number of ARP hosts on this SAP.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.2 |
sapArpHostStatTriggersRxThe value of sapArpHostStatTriggersRx indicates
the number of ARP triggers received on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.3 |
sapArpHostStatTriggersIgnoredThe value of sapArpHostStatTriggersIgnored indicates
the number of ARP triggers received on this SAP
that did not result in the creation of a new ARP host
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.
This number does not include the number indicated by
sapArpHostStatTrigIgnQFull.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.4 |
sapArpHostStatTrigIgnQFullThe value of sapArpHostStatTrigIgnQFull indicates
the number of ARP triggers received on this SAP
that did not result in the creation of a new ARP host because
the internal ARP trigger event queue of the system was full,
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.5 |
sapArpHostStatNumForcedVerifThe value of sapArpHostStatNumForcedVerif indicates
the number of times that the system started a forced subscriber
host connectivity verification for an ARP host on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.6 |
sapArpHostStatNumCreatedThe value of sapArpHostStatNumCreated indicates
the number of times that an ARP host was created on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.7 |
sapArpHostStatNumDeletedThe value of sapArpHostStatNumDeleted indicates
the number of times that an ARP host was deleted on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.8 |
sapArpHostStatNumUpdatedThe value of sapArpHostStatNumUpdated indicates
the number of times that an ARP host was updated on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.9 |
sapArpHostStatNumAuthReqThe value of sapArpHostStatNumAuthReq indicates
the number of times that the system initiated
an authentication request for an ARP host on this SAP
since the last re-initialization of the local network
management subsystem, or the last time the system statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.75.1.10 |
sapPbbTableA table that contains
Provider Backbone Bridging (PBB/IEEE 802.1ah) SAP
information. SEQUENCE OF SapPbbEntry .1.3.6.1.4.1.6527.3.1.2.4.3.76 |
sapPbbEntryPBB I-Component instance-specific information about a
specific SAP in the B-Component instance.
Entries in this table can be created or deleted
via SNMP operations. SapPbbEntry .1.3.6.1.4.1.6527.3.1.2.4.3.76.1 |
sapPbbSvcIdIVplsThe value of the object sapPbbSvcIdIVpls specifies the
Service identifier of the I-Component instance. TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.1 |
sapPbbSvcIdBVplsThe value of the object sapPbbSvcIdBVpls specifies the
Service identifier of the B-Component instance. TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.2 |
sapPbbPortIdThe value of the object sapPbbPortId specifies
the ID of the access port in the B-Component instance
where this SAP is defined. TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.3 |
sapPbbEncapValueThe value of the object sapPbbEncapValue specifies
the value of the label used to identify this SAP in the
B-Component instance on the access port specified by
sapPortId. TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.4 |
sapPbbRowStatusThe value of sapPbbRowStatus specifies
the row status of this row.
The only values supported during a set operation are
'createAndGo' and 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.5 |
sapPbbLastMgmtChangeThe value of sapPbbLastMgmtChange indicates
the sysUpTime at the time of the most recent
management-initiated change to this table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.6 |
sapPbbIgmpSnpgMRouterThe value of the object sapPbbIgmpSnpgMRouter specifies
if a multicast router is attached behind this SAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.76.1.7 |
sapFPropBMacAddrTblLastChgdThe value of sapFPropBMacAddrTblLastChgd indicates the sysUpTime
of the last modification of sapFPropBMacAddrTable.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, this object contains a zero
value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.77 |
sapFPropBMacAddrTablesapFPropBMacAddrTable contains the optional configured backbone MAC
(BMac) addresses (or MAC names) for each SAP. This table extends the
information in sapBaseInfoTable. SEQUENCE OF SapFPropBMacAddrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.78 |
sapFPropBMacAddrEntrysapFPropBMacAddrEntry defines a row in the sapFPropBMacAddrTable.
The first three index objects reside in sapBaseInfoTable. Rows
are created and destroyed using sapFPropBMacAddrRowStatus. SapFPropBMacAddrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.78.1 |
sapFPropBMacAddrMacNameOrAddrTagThe value of sapFPropBMacAddrMacNameOrAddrTag specifies whether
sapFPropBMacAddrMacNameOrAddr contains a MAC name, or a MAC address. Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.78.1.1 |
sapFPropBMacAddrMacNameOrAddrThe value of sapFPropBMacAddrMacNameOrAddr specifies a MAC name or MAC
address configured against a <svcId, sapPortId, sapEncapValue> index
triple.
When sapFPropBMacAddrMacNameOrAddrTag is 'macName (1)',
sapFPropBMacAddrMacNameOrAddr must contain a MAC name which is
present in the svcMacName column of the svcMacNameTable.
When sapFPropBMacAddrMacNameOrAddrTag is 'macAddr (2)',
sapFPropBMacAddrMacNameOrAddr must contain a MAC address, encoded in
network byte order and IEEE 802.3 canonical bit order as defined in
IEEE Std 802-2001.
All the MAC addresses configured for a particular SAP (whether
configured as MAC addresses, or via MAC names) must refer to one
B-VPLS on the remote system. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.78.1.2 |
sapFPropBMacAddrRowStatusThe value of sapFPropBMacAddrRowStatus specifies the status of this
row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.78.1.3 |
sapIpv6HostInfoTablesapIpv6HostInfoTable contains IPv6 information related to a
routed CO subscriber SAP. This table complements
sapBaseInfoTable, and contains an entry for each
routed CO subscriber SAP. Rows in this table
are created and deleted automatically by the system. SEQUENCE OF SapIpv6HostInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.79 |
sapIpv6HostInfoEntryIPv6 specific information for a routed CO subscriber SAP. SapIpv6HostInfoEntry .1.3.6.1.4.1.6527.3.1.2.4.3.79.1 |
sapIpv6HostInfoIpoeDhcp6HostsThe value of the object sapIpv6HostInfoIpoeDhcp6Hosts
indicates the number of IPoE DHCPv6 hosts for this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.79.1.1 |
sapIpv6HostInfoPppDhcp6HostsThe value of the object sapIpv6HostInfoPppDhcp6Hosts
indicates the number of PPP DHCPv6 hosts for this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.79.1.2 |
sapIpv6HostInfoPppSLAACHostsThe value of the object sapIpv6HostInfoPppSLAACHosts
indicates the number of PPP SLAAC hosts for this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.79.1.3 |
sapIpv6HostInfoIpoeSLAACHostsThe value of the object sapIpv6HostInfoIpoeSLAACHosts
indicates the number of IPoE SLAAC hosts for this SAP.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.79.1.4 |
sapIngPlcrCtrlOvrTblLastChgdsapIngPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to
the sapIngPlcrCtrlOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.80 |
sapIngPlcrCtrlOvrTableA table that contains SAP ingress policer control
override information. SEQUENCE OF SapIngPlcrCtrlOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.81 |
sapIngPlcrCtrlOvrEntryPolicer control override information about a specific SAP
on the ingress side. SapIngPlcrCtrlOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.81.1 |
sapIngPlcrCtrlOvrRowStatusThis is the Row Status of the entry.
This allows creation/deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.81.1.1 |
sapIngPlcrCtrlOvrLastChgdThe value of sapIngPlcrCtrlOvrLastChgd indicates the timestamp of
last change to this row in sapIngPlcrCtrlOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.81.1.2 |
sapIngPlcrCtrlOvrMaxRateThe value of sapIngPlcrCtrlOvrMaxRate specifies the
maximum frame based bandwidth limit of this policer override.rw THPolPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.81.1.3 |
sapIngPlcrCtrlOvrMinMBSSepThe value of sapIngPlcrCtrlOvrMinMBSSep specifies the
minimum amount of seperation buffer space (in bytes) allowed
by this policer override.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.81.1.4 |
sapIngPlcrCtrlOvrLvlTblLastChgdsapIngPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change
to the sapIngPlcrCtrlOvrLvlTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.82 |
sapIngPlcrCtrlOvrLvlTableA table that contains SAP ingress policer control
override information for the priority level. SEQUENCE OF SapIngPlcrCtrlOvrLvlEntry .1.3.6.1.4.1.6527.3.1.2.4.3.83 |
sapIngPlcrCtrlOvrLvlEntryPolicer control priority level override information about
a specific SAP on the ingress side.
Entries are created/deleted automatically by the system
when entries are created/delete in the
sapIngPlcrCtrlOvrTable. SapIngPlcrCtrlOvrLvlEntry .1.3.6.1.4.1.6527.3.1.2.4.3.83.1 |
sapIngPlcrCtrlOvrLvlLastChgdThe value of sapIngPlcrCtrlOvrLvlLastChgd indicates the timestamp of
last change to this row in sapIngPlcrCtrlOvrLvlTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.83.1.1 |
sapIngPlcrCtrlOvrLvlMBSThe value of sapIngPlcrCtrlOvrLvlMBS specifies the maximum amount of
cumulative buffer space (in bytes) allowed for this level by the
policer of this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.83.1.2 |
sapIngPlcrOvrTblLastChgdsapIngPlcrOvrTblLastChgd indicates the timestamp of last change to
the sapIngPlcrOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.86 |
sapIngPlcrOvrTableA table that contains SAP ingress policer control
override information. SEQUENCE OF SapIngPlcrOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.87 |
sapIngPlcrOvrEntryPolicer control override information about a specific
policer of the SAP on the ingress side. SapIngPlcrOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.87.1 |
sapIngPlcrOvrRowStatusThis is the Row Status of the entry.
This allows creation/deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.1 |
sapIngPlcrOvrLastChgdThe value of sapIngPlcrOvrLastChgd indicates the timestamp of
last change to this row in sapIngPlcrOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.2 |
sapIngPlcrOvrAdminPIRsapIngPlcrOvrAdminPIR specifies the administrative PIR specified by
the user.rw THPolPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.3 |
sapIngPlcrOvrAdminCIRsapIngPlcrOvrAdminCIR specifies the administrative CIR specified by
the user.rw THPolCIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.4 |
sapIngPlcrOvrStatModesapIngPlcrOvrStatMode specifies the mode of statistics collected by
this policer on this sap.rw TmnxIngPolicerStatModeOverride .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.5 |
sapIngPlcrOvrMBSsapIngPlcrOvrMBS specifies the maximum amount of buffer space
(in bytes) allowed for the queue by this policer on this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.6 |
sapIngPlcrOvrPktOffsetsapIngPlcrOvrPktOffset specifies the packet byte offset for
addition of policing information by this policer on this sap.rw TPerPacketOffsetOvr UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.7 |
sapIngPlcrOvrCBSsapIngPlcrOvrCBS specifies the amount of reserved buffer space
(in bytes) for the queue set by this policer on this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.8 |
sapIngPlcrOvrAdminPIRPercentThe value of sapIngPlcrOvrAdminPIRPercent specifies the
desired administrative PIR value for this policer as
a percentage.rw TPIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.9 |
sapIngPlcrOvrAdminCIRPercentThe value of sapIngPlcrOvrAdminCIRPercent specifies the
desired administrative CIR value for this policer
as a percentage.rw TCIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.4.3.87.1.10 |
sapEgrPlcrCtrlOvrTblLastChgdsapEgrPlcrCtrlOvrTblLastChgd indicates the timestamp of last change to
the sapEgrPlcrCtrlOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.88 |
sapEgrPlcrCtrlOvrTableA table that contains SAP egress policer control
override information. SEQUENCE OF SapEgrPlcrCtrlOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.89 |
sapEgrPlcrCtrlOvrEntryPolicer control override information about a specific SAP
on the egress side. SapEgrPlcrCtrlOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.89.1 |
sapEgrPlcrCtrlOvrRowStatusThis is the Row Status of the entry.
This allows creation/deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.89.1.1 |
sapEgrPlcrCtrlOvrLastChgdThe value of sapEgrPlcrCtrlOvrLastChgd indicates the timestamp of
last change to this row in sapEgrPlcrCtrlOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.89.1.2 |
sapEgrPlcrCtrlOvrMaxRateThe value of sapEgrPlcrCtrlOvrMaxRate specifies the
maximum frame based bandwidth limit of this policer override.rw THPolPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.89.1.3 |
sapEgrPlcrCtrlOvrMinMBSSepThe value of sapEgrPlcrCtrlOvrMinMBSSep specifies the
minimum amount of seperation buffer space (in bytes) allowed
by this policer override.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.89.1.4 |
sapEgrPlcrCtrlOvrLvlTblLastChgdsapEgrPlcrCtrlOvrLvlTblLastChgd indicates the timestamp of last change
to the sapEgrPlcrCtrlOvrLvlTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.90 |
sapEgrPlcrCtrlOvrLvlTableA table that contains SAP egress policer control
override information for the priority level. SEQUENCE OF SapEgrPlcrCtrlOvrLvlEntry .1.3.6.1.4.1.6527.3.1.2.4.3.91 |
sapEgrPlcrCtrlOvrLvlEntryPolicer control priority level override information about
a specific SAP on the egress side.
Entries are created/deleted automatically by the system
when entries are created/delete in the
sapEgrPlcrCtrlOvrTable. SapEgrPlcrCtrlOvrLvlEntry .1.3.6.1.4.1.6527.3.1.2.4.3.91.1 |
sapEgrPlcrCtrlOvrLvlLastChgdThe value of sapEgrPlcrCtrlOvrLvlLastChgd indicates the timestamp of
last change to this row in sapEgrPlcrCtrlOvrLvlTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.91.1.1 |
sapEgrPlcrCtrlOvrLvlMBSThe value of sapEgrPlcrCtrlOvrLvlMBS specifies the maximum amount of
cumulative buffer space (in bytes) allowed for this level by the
policer of this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.91.1.2 |
sapEgrPlcrOvrTblLastChgdsapEgrPlcrOvrTblLastChgd indicates the timestamp of last change to
the sapEgrPlcrOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.94 |
sapEgrPlcrOvrTableA table that contains SAP egress policer control
override information. SEQUENCE OF SapEgrPlcrOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.95 |
sapEgrPlcrOvrEntryPolicer control override information about a specific
policer of the SAP on the egress side. SapEgrPlcrOvrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.95.1 |
sapEgrPlcrOvrRowStatusThis is the Row Status of the entry.
This allows creation/deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.1 |
sapEgrPlcrOvrLastChgdThe value of sapEgrPlcrOvrLastChgd indicates the timestamp of
last change to this row in sapEgrPlcrOvrTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.2 |
sapEgrPlcrOvrAdminPIRsapEgrPlcrOvrAdminPIR specifies the administrative PIR specified by
the user.rw THPolPIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.3 |
sapEgrPlcrOvrAdminCIRsapEgrPlcrOvrAdminCIR specifies the administrative CIR specified by
the user.rw THPolCIRRateOverride UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.4 |
sapEgrPlcrOvrStatModesapEgrPlcrOvrStatMode specifies the mode of statistics collected by
this policer on this sap.rw TmnxEgrPolicerStatModeOverride .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.5 |
sapEgrPlcrOvrMBSsapEgrPlcrOvrMBS specifies the maximum amount of buffer space
(in bytes) allowed for the queue by this policer on this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.6 |
sapEgrPlcrOvrPktOffsetsapEgrPlcrOvrPktOffset specifies the packet byte offset for
addition of policing information by this policer on this sap.rw TPerPacketOffsetOvr (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.7 |
sapEgrPlcrOvrCBSsapEgrPlcrOvrCBS specifies the amount of reserved buffer space
(in bytes) for the queue set by this policer on this sap.rw TPlcrBurstSizeBytesOverride UNITS "bytes" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.8 |
sapEgrPlcrOvrAdminPIRPercentThe value of sapEgrPlcrOvrAdminPIRPercent specifies the
desired administrative PIR value for this policer
as a percentage.rw TPIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.9 |
sapEgrPlcrOvrAdminCIRPercentThe value of sapEgrPlcrOvrAdminCIRPercent specifies the
desired administrative CIR value for this policer
as a percentage.rw TCIRPercentOverride UNITS "hundredths of a percent" .1.3.6.1.4.1.6527.3.1.2.4.3.95.1.10 |
sapIngQosPolicerStatsTableA table that contains ingress QoS policer SAP statistics. SEQUENCE OF SapIngQosPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.96 |
sapIngQosPolicerStatsEntryIngress statistics about a specific SAP's QoS policer. SapIngQosPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.96.1 |
sapIngQosPStatsPolIdThe index of the ingress QoS policer of this SAP. TIngPolicerId .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.1 |
sapIngQosPStatsCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.2 |
sapIngQosPStatsModeThe value of sapIngQosPStatsMode indicates the stat mode used by the policer.ro TmnxIngPolicerStatMode .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.3 |
sapIngQosPStatsOffHiPrioPktsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.4 |
sapIngQosPStatsOffHiPrioPktsLoLower 32 bits of sapIngQosPStatsOffHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.5 |
sapIngQosPStatsOffHiPrioPktsHiUpper 32 bits of sapIngQosPStatsOffHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.6 |
sapIngQosPStatsDrpHiPrioPktsThe number of high priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Pchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.7 |
sapIngQosPStatsDrpHiPrioPktsLoLower 32 bits of sapIngQosPStatsDrpHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.8 |
sapIngQosPStatsDrpHiPrioPktsHiUpper 32 bits of sapIngQosPStatsDrpHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.9 |
sapIngQosPStatsOffLoPrioPktsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.10 |
sapIngQosPStatsOffLoPrioPktsLoLower 32 bits of sapIngQosPStatsOffLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.11 |
sapIngQosPStatsOffLoPrioPktsHiUpper 32 bits of sapIngQosPStatsOffLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.12 |
sapIngQosPStatsDrpLoPrioPktsThe number of low priority packets,
as determined by the SAP ingress QoS
policy, dropped by the Pchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.13 |
sapIngQosPStatsDrpLoPrioPktsLoLower 32 bits of sapIngQosPStatsDrpLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.14 |
sapIngQosPStatsDrpLoPrioPktsHiUpper 32 bits of sapIngQosPStatsDrpLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.15 |
sapIngQosPStatsOffHiPrioOctsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.16 |
sapIngQosPStatsOffHiPrioOctsLoLower 32 bits of sapIngQosPStatsOffHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.17 |
sapIngQosPStatsOffHiPrioOctsHiUpper 32 bits of sapIngQosPStatsOffHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.18 |
sapIngQosPStatsDrpHiPrioOctsThe number of high priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Pchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.19 |
sapIngQosPStatsDrpHiPrioOctsLoLower 32 bits of sapIngQosPStatsDrpHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.20 |
sapIngQosPStatsDrpHiPrioOctsHiUpper 32 bits of sapIngQosPStatsDrpHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.21 |
sapIngQosPStatsOffLoPrioOctsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, offered by the Pchip to the
Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.22 |
sapIngQosPStatsOffLoPrioOctsLoLower 32 bits of sapIngQosPStatsOffLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.23 |
sapIngQosPStatsOffLoPrioOctsHiUpper 32 bits of sapIngQosPStatsOffLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.24 |
sapIngQosPStatsDrpLoPrioOctsThe number of low priority octets,
as determined by the SAP ingress QoS
policy, dropped by the Pchip due to:
MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.25 |
sapIngQosPStatsDrpLoPrioOctsLoLower 32 bits of sapIngQosPStatsDrpLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.26 |
sapIngQosPStatsDrpLoPrioOctsHiUpper 32 bits of sapIngQosPStatsDrpLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.27 |
sapIngQosPStatsFwdInProfPktsThe number of in-profile packets
(rate below CIR) forwarded by the
ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.28 |
sapIngQosPStatsFwdInProfPktsLoLower 32 bits of sapIngQosPStatsFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.29 |
sapIngQosPStatsFwdInProfPktsHiUpper 32 bits of sapIngQosPStatsFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.30 |
sapIngQosPStatsFwdOutProfPktsThe number of out-of-profile packets
(rate above CIR) forwarded by the
ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.31 |
sapIngQosPStatsFwdOutProfPktsLoLower 32 bits of sapIngQosPStatsFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.32 |
sapIngQosPStatsFwdOutProfPktsHiUpper 32 bits of sapIngQosPStatsFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.33 |
sapIngQosPStatsFwdInProfOctsThe number of in-profile octets
(rate below CIR) forwarded by the
ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.34 |
sapIngQosPStatsFwdInProfOctsLoLower 32 bits of sapIngQosPStatsFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.35 |
sapIngQosPStatsFwdInProfOctsHiUpper 32 bits of sapIngQosPStatsFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.36 |
sapIngQosPStatsFwdOutProfOctsThe number of out-of-profile octets
(rate above CIR) forwarded by the
ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.37 |
sapIngQosPStatsFwdOutProfOctsLoLower 32 bits of sapIngQosPStatsFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.38 |
sapIngQosPStatsFwdOutProfOctsHiUpper 32 bits of sapIngQosPStatsFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.39 |
sapIngQosPStatsUncolPktsOffThe number of uncolored packets offered to the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.40 |
sapIngQosPStatsUncolPktsOffLoLower 32 bits of sapIngQosPStatsUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.41 |
sapIngQosPStatsUncolPktsOffHiUpper 32 bits of sapIngQosPStatsUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.42 |
sapIngQosPStatsUncolOctsOffThe number of uncolored octets offered to the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.43 |
sapIngQosPStatsUncolOctsOffLoLower 32 bits of sapIngQosPStatsUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.44 |
sapIngQosPStatsUncolOctsOffHiUpper 32 bits of sapIngQosPStatsUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.96.1.45 |
sapEgrQosPolicerStatsTableA table that contains egress QoS policer SAP statistics. SEQUENCE OF SapEgrQosPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.97 |
sapEgrQosPolicerStatsEntryEgress statistics about a specific SAP's QoS policer. SapEgrQosPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.97.1 |
sapEgrQosPStatsPolIdThe index of the egress QoS queue of this SAP. TEgrPolicerId .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.1 |
sapEgrQosPStatsCustIdThe Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.2 |
sapEgrQosPStatsModeThe value of sapEgrQosPStatsMode indicates the stat mode used by the policer.ro TmnxEgrPolicerStatMode .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.3 |
sapEgrQosPStatsOffInProfPktsThe number of in-profile packets
(rate below CIR) offered by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.4 |
sapEgrQosPStatsOffInProfPktsLoLower 32 bits of sapEgrQosPStatsOffInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.5 |
sapEgrQosPStatsOffInProfPktsHiUpper 32 bits of sapEgrQosPStatsOffInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.6 |
sapEgrQosPStatsFwdInProfPktsThe number of in-profile packets
(rate below CIR) forwarded by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.7 |
sapEgrQosPStatsFwdInProfPktsLoLower 32 bits of sapEgrQosPStatsFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.8 |
sapEgrQosPStatsFwdInProfPktsHiUpper 32 bits of sapEgrQosPStatsFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.9 |
sapEgrQosPStatsDrpInProfPktsThe number of in-profile packets
discarded by the egress Pchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.10 |
sapEgrQosPStatsDrpInProfPktsLoLower 32 bits of sapEgrQosPStatsDrpInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.11 |
sapEgrQosPStatsDrpInProfPktsHiUpper 32 bits of sapEgrQosPStatsDrpInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.12 |
sapEgrQosPStatsOffOutProfPktsThe number of out-of-profile packets
(rate above CIR) offered by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.13 |
sapEgrQosPStatsOffOutProfPktsLoLower 32 bits of sapEgrQosPStatsOffOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.14 |
sapEgrQosPStatsOffOutProfPktsHiUpper 32 bits of sapEgrQosPStatsOffOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.15 |
sapEgrQosPStatsFwdOutProfPktsThe number of out-of-profile packets
(rate above CIR) forwarded by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.16 |
sapEgrQosPStatsFwdOutProfPktsLoLower 32 bits of sapEgrQosPStatsFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.17 |
sapEgrQosPStatsFwdOutProfPktsHiUpper 32 bits of sapEgrQosPStatsFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.18 |
sapEgrQosPStatsDrpOutProfPktsThe number of out-of-profile packets
discarded by the egress Pchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.19 |
sapEgrQosPStatsDrpOutProfPktsLoLower 32 bits of sapEgrQosPStatsDrpOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.20 |
sapEgrQosPStatsDrpOutProfPktsHiUpper 32 bits of sapEgrQosPStatsDrpOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.21 |
sapEgrQosPStatsOffInProfOctsThe number of in-profile octets
(rate below CIR) offered by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.22 |
sapEgrQosPStatsOffInProfOctsLoLower 32 bits of sapEgrQosPStatsOffInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.23 |
sapEgrQosPStatsOffInProfOctsHiUpper 32 bits of sapEgrQosPStatsOffInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.24 |
sapEgrQosPStatsFwdInProfOctsThe number of in-profile octets
(rate below CIR) forwarded by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.25 |
sapEgrQosPStatsFwdInProfOctsLoLower 32 bits of sapEgrQosPStatsFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.26 |
sapEgrQosPStatsFwdInProfOctsHiUpper 32 bits of sapEgrQosPStatsFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.27 |
sapEgrQosPStatsDrpInProfOctsThe number of in-profile octets
discarded by the egress Pchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.28 |
sapEgrQosPStatsDrpInProfOctsLoLower 32 bits of sapEgrQosPStatsDrpInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.29 |
sapEgrQosPStatsDrpInProfOctsHiUpper 32 bits of sapEgrQosPStatsDrpInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.30 |
sapEgrQosPStatsOffOutProfOctsThe number of out-of-profile octets
(rate above CIR) forwarded by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.31 |
sapEgrQosPStatsOffOutProfOctsLoLower 32 bits of sapEgrQosPStatsOffOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.32 |
sapEgrQosPStatsOffOutProfOctsHiUpper 32 bits of sapEgrQosPStatsOffOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.33 |
sapEgrQosPStatsFwdOutProfOctsThe number of out-of-profile octets
(rate above CIR) forwarded by the
egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.34 |
sapEgrQosPStatsFwdOutProfOctsLoLower 32 bits of sapEgrQosPStatsFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.35 |
sapEgrQosPStatsFwdOutProfOctsHiUpper 32 bits of sapEgrQosPStatsFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.36 |
sapEgrQosPStatsDrpOutProfOctsThe number of out-of-profile octets
discarded by the egress Pchip due
to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.37 |
sapEgrQosPStatsDrpOutProfOctsLoLower 32 bits of sapEgrQosPStatsDrpOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.38 |
sapEgrQosPStatsDrpOutProfOctsHiUpper 32 bits of sapEgrQosPStatsDrpOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.39 |
sapEgrQosPStatsUncolPktsOffThe number of uncolored packets forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.40 |
sapEgrQosPStatsUncolPktsOffLoLower 32 bits of sapIngQosPStatsUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.41 |
sapEgrQosPStatsUncolPktsOffHiUpper 32 bits of sapIngQosPStatsUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.42 |
sapEgrQosPStatsUncolOctsOffThe number of uncolored octets forwarded by the egress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.43 |
sapEgrQosPStatsUncolOctsOffLoLower 32 bits of sapIngQosPStatsUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.44 |
sapEgrQosPStatsUncolOctsOffHiUpper 32 bits of sapIngQosPStatsUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.97.1.45 |
sapIngQosPlcyPolicerStatsTableA table that contains ingress QoS policer SAP
statistics, per Ingress QoS Policy the policer was used by. SEQUENCE OF SapIngQosPlcyPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.98 |
sapIngQosPlcyPolicerStatsEntryIngress statistics about a specific SAP's QoS policer for a given Qos policy. SapIngQosPlcyPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.98.1 |
sapIgQosPlcyPStatPlcyIdThe row index in the tSapIngressTable corresponding to this ingress QoS policy. TSapIngressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.1 |
sapIgQosPlcyPStatPolIdThe index of the ingress QoS policer of this SAP used by the
policy indicated by sapIgQosPlcyPStatPlcyId. TIngPolicerId .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.2 |
sapIgQosPlcyPStatCustIdThe value of the object sapIgQosPlcyPStatCustId
indicates the Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.3 |
sapIgQosPlcyPStatModeThe value of sapIgQosPlcyPStatMode indicates the stat mode used by the policer.ro TmnxIngPolicerStatMode .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.4 |
sapIgQosPlcyPStatOffHiPrioPktsThe value of sapIgQosPlcyPStatOffHiPrioPkts
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.5 |
sapIgQosPlcyPStatOffHiPrioPktsLLower 32 bits of sapIgQosPlcyPStatOffHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.6 |
sapIgQosPlcyPStatOffHiPrioPktsHUpper 32 bits of sapIgQosPlcyPStatOffHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.7 |
sapIgQosPlcyPStatDrpHiPrioPktsThe value of sapIgQosPlcyPStatDrpHiPrioPkts
indicates the number of high priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Pchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.8 |
sapIgQosPlcyPStatDrpHiPrioPktsLLower 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.9 |
sapIgQosPlcyPStatDrpHiPrioPktsHUpper 32 bits of sapIgQosPlcyPStatDrpHiPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.10 |
sapIgQosPlcyPStatOffLoPrioPktsThe value of sapIgQosPlcyPStatOffLoPrioPkts
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.11 |
sapIgQosPlcyPStatOffLoPrioPktsLLower 32 bits of sapIgQosPlcyPStatOffLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.12 |
sapIgQosPlcyPStatOffLoPrioPktsHUpper 32 bits of sapIgQosPlcyPStatOffLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.13 |
sapIgQosPlcyPStatDrpLoPrioPktsThe value of sapIgQosPlcyPStatDrpLoPrioPkts
indicates the number of low priority packets,
as determined by the SAP ingress QoS policy, dropped by
the Pchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.14 |
sapIgQosPlcyPStatDrpLoPrioPktsLLower 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.15 |
sapIgQosPlcyPStatDrpLoPrioPktsHUpper 32 bits of sapIgQosPlcyPStatDrpLoPrioPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.16 |
sapIgQosPlcyPStatOffHiPrioOctsThe value of sapIgQosPlcyPStatOffHiPrioOcts
indicates the number of high priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.17 |
sapIgQosPlcyPStatOffHiPrioOctsLLower 32 bits of sapIgQosPlcyPStatOffHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.18 |
sapIgQosPlcyPStatOffHiPrioOctsHUpper 32 bits of sapIgQosPlcyPStatOffHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.19 |
sapIgQosPlcyPStatDrpHiPrioOctsThe value of sapIgQosPlcyPStatDrpHiPrioOcts
indicates the number ofhigh priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Pchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.20 |
sapIgQosPlcyPStatDrpHiPrioOctsLLower 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.21 |
sapIgQosPlcyPStatDrpHiPrioOctsHUpper 32 bits of sapIgQosPlcyPStatDrpHiPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.22 |
sapIgQosPlcyPStatOffLoPrioOctsThe value of sapIgQosPlcyPStatOffLoPrioOcts
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, offered by
the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.23 |
sapIgQosPlcyPStatOffLoPrioOctsLLower 32 bits of sapIgQosPlcyPStatOffLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.24 |
sapIgQosPlcyPStatOffLoPrioOctsHUpper 32 bits of sapIgQosPlcyPStatOffLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.25 |
sapIgQosPlcyPStatDrpLoPrioOctsThe value of sapIgQosPlcyPStatDrpLoPrioOcts
indicates the number of low priority octets,
as determined by the SAP ingress QoS policy, dropped by
the Pchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.26 |
sapIgQosPlcyPStatDrpLoPrioOctsLLower 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.27 |
sapIgQosPlcyPStatDrpLoPrioOctsHUpper 32 bits of sapIgQosPlcyPStatDrpLoPrioOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.28 |
sapIgQosPlcyPStatFwdInProfPktsThe value of sapIgQosPlcyPStatFwdInProfPkts
indicates the number of in-profile packets
(rate below CIR) forwarded by the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.29 |
sapIgQosPlcyPStatFwdInProfPktsLLower 32 bits of sapIgQosPlcyPStatFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.30 |
sapIgQosPlcyPStatFwdInProfPktsHUpper 32 bits of sapIgQosPlcyPStatFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.31 |
sapIgQosPlcyPStatFwdOutProfPktsThe value of sapIgQosPlcyPStatFwdOutProfPkts
indicates the number of out-of-profile packets
(rate above CIR) forwarded by the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.32 |
sapIgQosPlcyPStatFwdOutProfPktsLLower 32 bits of sapIgQosPlcyPStatFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.33 |
sapIgQosPlcyPStatFwdOutProfPktsHUpper 32 bits of sapIgQosPlcyPStatFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.34 |
sapIgQosPlcyPStatFwdInProfOctsThe value of sapIgQosPlcyPStatFwdInProfOcts
indicates the number of in-profile octets
(rate below CIR) forwarded by the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.35 |
sapIgQosPlcyPStatFwdInProfOctsLLower 32 bits of sapIgQosPlcyPStatFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.36 |
sapIgQosPlcyPStatFwdInProfOctsHUpper 32 bits of sapIgQosPlcyPStatFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.37 |
sapIgQosPlcyPStatFwdOutProfOctsThe value of sapIgQosPlcyPStatFwdOutProfOcts
indicates the number of out-of-profile octets
(rate above CIR) forwarded by the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.38 |
sapIgQosPlcyPStatFwdOutProfOctsLLower 32 bits of sapIgQosPlcyPStatFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.39 |
sapIgQosPlcyPStatFwdOutProfOctsHUpper 32 bits of sapIgQosPlcyPStatFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.40 |
sapIgQosPlcyPStatUncolPktsOffThe value of sapIgQosPlcyPStatUncolPktsOff
indicates the number of uncolored packets offered to
the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.41 |
sapIgQosPlcyPStatUncolPktsOffLLower 32 bits of sapIgQosPlcyPStatUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.42 |
sapIgQosPlcyPStatUncolPktsOffHUpper 32 bits of sapIgQosPlcyPStatUncolPktsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.43 |
sapIgQosPlcyPStatUncolOctsOffThe value of sapIgQosPlcyPStatUncolOctsOff
indicates the number of uncolored octets offered to
the ingress Pchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.44 |
sapIgQosPlcyPStatUncolOctsOffLLower 32 bits of sapIgQosPlcyPStatUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.45 |
sapIgQosPlcyPStatUncolOctsOffHUpper 32 bits of sapIgQosPlcyPStatUncolOctsOff.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.98.1.46 |
sapEgrQosPlcyPolicerStatsTableA table that contains egress QoS policer SAP
statistics per Egress QoS Policy the policer was used by. SEQUENCE OF SapEgrQosPlcyPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.99 |
sapEgrQosPlcyPolicerStatsEntryEgress statistics about a specific SAP's QoS policer for a given Qos policy. SapEgrQosPlcyPolicerStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.99.1 |
sapEgQosPlcyPStatPlcyIdThe row index in the tSapEgressTable corresponding to this egress QoS policy. TSapEgressPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.1 |
sapEgQosPlcyPStatPolIdThe index of the egress QoS policer of this SAP used by the
policy indicated by sapEgQosPlcyPStatPlcyId. TEgrPolicerId .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.2 |
sapEgQosPlcyPStatCustIdThe value of the object sapEgQosPlcyPStatCustId indicates
the Customer ID for the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.3 |
sapEgQosPlcyPStatModeThe value of sapEgQosPlcyPStatMode indicates the stat mode used by the policer.ro TmnxEgrPolicerStatMode .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.4 |
sapEgQosPlcyPStatOffInProfPktsThe value of sapEgQosPlcyPStatOffInProfPkts
indicates the number of in-profile packets (rate below
CIR) offered by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.5 |
sapEgQosPlcyPStatOffInProfPktsLLower 32 bits of sapEgQosPlcyPStatOffInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.6 |
sapEgQosPlcyPStatOffInProfPktsHUpper 32 bits of sapEgQosPlcyPStatOffInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.7 |
sapEgQosPlcyPStatFwdInProfPktsThe value of sapEgQosPlcyPStatFwdInProfPkts
indicates the number of in-profile packets (rate below
CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.8 |
sapEgQosPlcyPStatFwdInProfPktsLLower 32 bits of sapEgQosPlcyPStatFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.9 |
sapEgQosPlcyPStatFwdInProfPktsHUpper 32 bits of sapEgQosPlcyPStatFwdInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.10 |
sapEgQosPlcyPStatDrpInProfPktsThe value of sapEgQosPlcyPStatDrpInProfPkts
indicates the number of in-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.11 |
sapEgQosPlcyPStatDrpInProfPktsLLower 32 bits of sapEgQosPlcyPStatDrpInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.12 |
sapEgQosPlcyPStatDrpInProfPktsHUpper 32 bits of sapEgQosPlcyPStatDrpInProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.13 |
sapEgQosPlcyPStatOffOutProfPktsThe value of sapEgQosPlcyPStatOffOutProfPkts
indicates the number of out-of-profile packets (rate
above CIR) offered by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.14 |
sapEgQosPlcyPStatOffOutProfPktsLLower 32 bits of sapEgQosPlcyPStatOffOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.15 |
sapEgQosPlcyPStatOffOutProfPktsHUpper 32 bits of sapEgQosPlcyPStatOffOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.16 |
sapEgQosPlcyPStatFwdOutProfPktsThe value of sapEgQosPlcyPStatFwdOutProfPkts
indicates the number of out-of-profile packets (rate
above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.17 |
sapEgQosPlcyPStatFwdOutProfPktsLLower 32 bits of sapEgQosPlcyPStatFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.18 |
sapEgQosPlcyPStatFwdOutProfPktsHUpper 32 bits of sapEgQosPlcyPStatFwdOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.19 |
sapEgQosPlcyPStatDrpOutProfPktsThe value of sapEgQosPlcyPStatDrpOutProfPkts
indicates the number out-of-profile packets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.20 |
sapEgQosPlcyPStatDrpOutProfPktsLLower 32 bits of sapEgQosPlcyPStatDrpOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.21 |
sapEgQosPlcyPStatDrpOutProfPktsHUpper 32 bits of sapEgQosPlcyPStatDrpOutProfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.22 |
sapEgQosPlcyPStatOffInProfOctsThe value of sapEgQosPlcyPStatOffInProfOcts
indicates the number ofin-profile octets (rate below CIR)
offered by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.23 |
sapEgQosPlcyPStatOffInProfOctsLLower 32 bits of sapEgQosPlcyPStatOffInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.24 |
sapEgQosPlcyPStatOffInProfOctsHUpper 32 bits of sapEgQosPlcyPStatOffInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.25 |
sapEgQosPlcyPStatFwdInProfOctsThe value of sapEgQosPlcyPStatFwdInProfOcts
indicates the number ofin-profile octets (rate below CIR)
forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.26 |
sapEgQosPlcyPStatFwdInProfOctsLLower 32 bits of sapEgQosPlcyPStatFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.27 |
sapEgQosPlcyPStatFwdInProfOctsHUpper 32 bits of sapEgQosPlcyPStatFwdInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.28 |
sapEgQosPlcyPStatDrpInProfOctsThe value of sapEgQosPlcyPStatDrpInProfOcts
indicates the number in-profile octets discarded by the
egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.29 |
sapEgQosPlcyPStatDrpInProfOctsLLower 32 bits of sapEgQosPlcyPStatDrpInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.30 |
sapEgQosPlcyPStatDrpInProfOctsHUpper 32 bits of sapEgQosPlcyPStatDrpInProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.31 |
sapEgQosPlcyPStatOffOutProfOctsThe value of sapEgQosPlcyPStatOffOutProfOcts
indicates the number of out-of-profile octets (rate
above CIR) offered by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.32 |
sapEgQosPlcyPStatOffOutProfOctsLLower 32 bits of sapEgQosPlcyPStatOffOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.33 |
sapEgQosPlcyPStatOffOutProfOctsHUpper 32 bits of sapEgQosPlcyPStatOffOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.34 |
sapEgQosPlcyPStatFwdOutProfOctsThe value of sapEgQosPlcyPStatFwdOutProfOcts
indicates the number of out-of-profile octets (rate
above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.35 |
sapEgQosPlcyPStatFwdOutProfOctsLLower 32 bits of sapEgQosPlcyPStatFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.36 |
sapEgQosPlcyPStatFwdOutProfOctsHUpper 32 bits of sapEgQosPlcyPStatFwdOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.37 |
sapEgQosPlcyPStatDrpOutProfOctsThe value of sapEgQosPlcyPStatDrpOutProfOcts
indicates the number out-of-profile octets discarded by
the egress Qchip due to: MBS exceeded, buffer pool limit
exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.38 |
sapEgQosPlcyPStatDrpOutProfOctsLLower 32 bits of sapEgQosPlcyPStatDrpOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.39 |
sapEgQosPlcyPStatDrpOutProfOctsHUpper 32 bits of sapEgQosPlcyPStatDrpOutProfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.99.1.40 |
tmnxSapNotifyObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.4.3.100 |
sapNotifyPortIdThe ID of the access port where a SAP is defined.ro TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.1 |
msapStatusThe status of the Managed SAP which is used
by the msapStateChanged notification to indicate
what state the Managed SAP has entered: 'created',
'modified', or 'deleted'.ro ConfigStatus (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.2 |
svcManagedSapCreationErrorThe value of the object svcManagedSapCreationError
indicates the reason why the system was unable to create
the managed SAP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.3 |
sapTlsNotifyMacAddrThe value of the object sapTlsNotifyMacAddr
indicates the MAC address associated with
a VPLS SAP.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.4 |
sapBGPPeeringHostIpAddrTypeThe value of sapBGPPeeringHostIpAddrType indicates the
address type of sapBGPPeeringHostIpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.5 |
sapBGPPeeringHostIpAddrThe value of sapBGPPeeringHostIpAddr indicates the IP
address of the host.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.100.6 |
sapBGPPeeringNotifDescriptionThe object sapBGPPeeringNotifDescription is a printable character
string.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.7 |
sapBGPPeeringAttrDiscardedThe value of the object sapBGPPeeringAttrDiscarded is equal to 'true'
if the BGP Peering attributes have been discarded.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.8 |
sapBGPPeeringVRtrIDThe unique value that identifies a virtual router.ro TmnxVRtrID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.9 |
sapTunnelNotifyNameThe value of sapTunnelNotifyName specifies the name of the IPsec
or GRE tunnel.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.10 |
sapTunnelNotifyReasonThe value of sapTunnelNotifyReason indicates the reason for the
tunnel notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.11 |
sapTunnelNotifyStateThe value of sapTunnelNotifyState indicates the operational state
of the tunnel in the notification.ro ServiceOperStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.12 |
sapNotifyReasonThe value of sapNotifyReason indicates the reason for the
SAP notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.100.13 |
sapNotifyNameThe value of sapNotifyName specifies a name.ro TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.14 |
sapPppNcpFailureProtocolThe value of sapPppNcpFailureProtocol indicates the
failing NCP protocol.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.100.15 |
sapIpipeCeIpAddrTypeThe value of sapIpipeCeIpAddrType indicates the
type of CE IP address on an IPIPE SAP. The CE IP address
is specified by sapIpipeCeIpAddress.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.16 |
sapIpipeCeIpAddressThe value of sapIpipeCeIpAddress indicates the CE IP
address of type sapIpipeCeIpAddrType on an IPIPE SAP.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.100.17 |
sapNotifyEncapValueThe value of the label used to identify this
SAP on the access port specified by sapNotifyPortId.ro TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.100.18 |
sapTmplTblLastChangedThe value of sapTmplTblLastChanged indicates the sysUpTime
at the time of the last modification of sapTmplTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.101 |
sapTmplTableA table that contains basic SAP template information. SEQUENCE OF SapTmplEntry .1.3.6.1.4.1.6527.3.1.2.4.3.102 |
sapTmplEntryBasic information about a specific SAP template. SapTmplEntry .1.3.6.1.4.1.6527.3.1.2.4.3.102.1 |
sapTmplNameThe value of the object sapTmplName specifies the
SAP template name. This name should be unique within
the SAP template domain. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.1 |
sapTmplRowStatusThis value of the object sapTmplRowStatus specifies the
status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.2 |
sapTmplLastChangedThe value of sapTmplLastChanged indicates the timestamp of last
change to this row in sapTmplTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.3 |
sapTmplSapCountThe value of sapTmplSapCount indicates the number of instantiated
SAPs created using this template.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.4 |
sapTmplTypeThis object indicates the type of service where this SAP is defined.
An 'inconsistentValue' error is returned if an attempt is made to
change the value of this object after row creation.rw ServType (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.5 |
sapTmplIngressQosPolicyIdThe value of the object sapTmplIngressQosPolicyId specifies
the row index in the tSapIngressTable corresponding to this
ingress QoS policy, or one if no policy is specified.
The value 0 is needed for mirror SAPs that
cannot have a QoS policy assigned.rw TTmplPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.6 |
sapTmplIngressMacFilterIdThe value of the object sapTmplIngressMacFilterId specifies
the row index in the tMacFilterTable corresponding to this
ingress filter, or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.7 |
sapTmplIngressIpFilterIdThe value of the object sapTmplIngressIpFilterId specifies the
row index in the tIPFilterTable corresponding to this
ingress filter, or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.8 |
sapTmplEgressQosPolicyIdThe row index in the tSapEgressTable
corresponding to this egress QoS policy,
or one if no policy is specified.rw TTmplPolicyID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.9 |
sapTmplEgressMacFilterIdThe row index in the tMacFilterTable
corresponding to this egress filter,
or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.10 |
sapTmplEgressIpFilterIdThe row index in the tIPFilterTable
corresponding to this egress filter,
or zero if no filter is specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.11 |
sapTmplCollectAcctStatsWhen the value of this object is 'true' the agent
collects accounting statistics on this SAP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.12 |
sapTmplIngressQosSchedulerPolicyThe value of sapTmplIngressQosSchedulerPolicy indicates
the ingress QoS scheduler for this SAP.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.13 |
sapTmplEgressQosSchedulerPolicyThe value of sapTmplEgressQosSchedulerPolicy indicates
the egress QoS scheduler for this SAP.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.14 |
sapTmplIngressSharedQueuePolicyThis object indicates the ingress shared queue policy
used by this SAP. When the value of this object is null
it means that the SAP will use individual ingress QoS
queues, instead of the shared ones.rw ServObjName (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.15 |
sapTmplIngressMatchQinQDot1PBitsThis object applies only to SAP's defined on a port
configured for qinq service encapsulation. It indicates
which 802.1P bits will be used to match a QoS or a MAC
filter policy when a double-tagged frame is received on
this SAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.16 |
sapTmplIngressIpv6FilterIdThe value of the object sapTmplIngressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this ingress ipv6 filter, or zero if no ipv6 filter is
specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.17 |
sapTmplEgressIpv6FilterIdThe value of the object sapTmplEgressIpv6FilterId specifies
the row index in the tIPv6FilterTable corresponding to
this egress ipv6 filter, or zero if no ipv6 filter is
specified.rw TFilterID (TIMETRA-FILTER-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.18 |
sapTmplIngUseMultipointSharedWhen the value of sapIngressSharedQueuePolicy is not null,
the value of the object sapTmplIngUseMultipointShared
specifies whether this SAP uses the multipoint-shared
queues of the shared policy.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.19 |
sapTmplEgressQinQMarkTopOnlyWhen the encapsulation type of the access port where
this SAP is defined is qinq, the value of the object
sapTmplEgressQinQMarkTopOnly specifies which P-bits to mark
during packet egress. When the value is false both set
of P-bits are marked. When the value is true, only the
P-bits in the top Q-tag are marked.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.20 |
sapTmplEgressAggRateLimitThe value of the object sapTmplEgressAggRateLimit
specifies the maximum total rate of all egress queues for
this SAP. The value '-1' means that there
is no limit.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.21 |
sapTmplEgressFrameBasedAcctgThe value of sapTmplEgressFrameBasedAcctg specifies whether
to use frame-based accounting when evaluating
sapTmplEgressAggRateLimit for all egress queues for this SAP.
If the value is 'false', the default packet-based accounting
method will be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.22 |
sapTmplIngressAggRateLimitThe value of the object sapTmplIngressAggRateLimit
specifies the maximum total rate of all ingress queues for
this SAP. The value '-1' means that there
is no limit.
This object is obsoleted in 10.0 Release.rwobsolete TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.23 |
sapTmplIngPolicerPolicyThe value of sapTmplIngPolicerPolicy specifies the ingress
policer control policy applicable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.24 |
sapTmplEgrPolicerPolicyThe value of sapTmplEgrPolicerPolicy specifies the egress
policer control policy applicable.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.25 |
sapTmplDot1agCfmMipThe value of sapTmplDot1agCfmMip specifies whether Maintance
Intermediate Points (MIP) will be created.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.26 |
sapTmplCpmProtPolicyIdThe value of sapTmplCpmProtPolicyId associates a CPM Protection
policy with a SAP.
A value of '-1' specifies that the system will determine the CPM
Protection policy for this SAP.rw TCpmProtPolicyIDOrDefault (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.27 |
sapTmplCpmProtMonitorMacThe value of sapTmplCpmProtMonitorMac specifies whether the
tmnxCpmProtPolPerSrcRateLimit of the CPM Protection policy
must be applied.
If the value of sapTmplCpmProtMonitorMac is 'true', the
per-source rate limit must be applied.
The sapTmplCpmProtMonitorMac will be ignored if the system derived
CPM Protection Policy from sapTmplCpmProtPolicyId is set to 'zero'
for the instantiated SAP.
At most one of sapTmplCpmProtMonitorMac and the
sapTmplCpmProtEthCfmMonitorFlags option 'ethCfmMonitor(0)' can be
enabled for this template.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.28 |
sapTmplCpmProtEthCfmMonitorFlagsThe value of sapTmplCpmProtEthCfmMonitorFlags specifies whether or not
to apply rate limiting (using the tmnxCpmProtEthCfmPolTable
configuration) to Ethernet Connectivity Fault Management (Eth-CFM)
packets served by a SAP created using this template. Two associated
options are also specified.
Five combinations of flag values are supported, as shown in the
following table.
Flag Value (0=Disabled, 1=Enabled)
- -
'ethCfmMonitor(0)' 0 0 0 0 1 1 1 1
'ethCfmMonitorAggregate(1)' 0 0 1 1 0 0 1 1
'ethCfmMonitorCommittedAccessRate(2)' 0 1 0 1 0 1 0 1
- -
Supported Combination? Y N N N Y Y Y Y
If 'ethCfmMonitor(0)' is disabled, Eth-CFM rate limiting is disabled on
the SAP.
If 'ethCfmMonitor(0)' is enabled, Eth-CFM rate limiting is enabled on
the SAP. Excess packets are discarded. The configured information
used to perform the Eth-CFM rate limiting (e.g. the rate limit(s))
resides in the tmnxCpmProtEthCfmPolTable row(s) indexed by the
template's sapTmplCpmProtPolicyId.
At most one of 'ethCfmMonitor(0)' and sapTmplCpmProtMonitorMac can be
enabled for this template.
The flags 'ethCfmMonitorAggregate(1)' and
'ethCfmMonitorCommittedAccessRate(2)' adjust the behavior of Eth-CFM
rate limiting. Therefore, they are only significant if Eth-CFM rate
limiting is enabled (i.e. when 'ethCfmMonitor(0)' is enabled). The
remainder of this DESCRIPTION assumes 'ethCfmMonitor(0)' is enabled.
If 'ethCfmMonitorAggregate(1)' is disabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies per peer
(i.e. on a source MAC address basis). For example, if the SAP's rate
limit for all Eth-CFM packets is 100 packets/sec, and two peers are
served by the SAP, then 100 Eth-CFM packets/sec from each peer is
within the limit.
If 'ethCfmMonitorAggregate(1)' is enabled, the applicable Eth-CFM
packet rate limit (tmnxCpmProtEthCfmPolRateLimit) applies to the
aggregated traffic flow. For example, if the SAP's rate limit for all
Eth-CFM packets is 100 packets/sec, and two peers are served by this
SAP, then the combined rate of the two peers cannot exceed 100
packets/sec.
'ethCfmMonitorCommittedAccessRate(2)' controls the interaction
between two features: Eth-CFM rate limiting, and overall rate limiting
(as configured using tmnxCpmProtPolOverallRateLimit).
If 'ethCfmMonitorCommittedAccessRate(2)' is disabled, an Eth-CFM
packet is subjected to two rate limits, in the following order.
a) The applicable tmnxCpmProtEthCfmPolRateLimit is applied, as
described above. If the packet exceeds the limit, it is discarded.
Otherwise...
b) The SAP's tmnxCpmProtPolOverallRateLimit (which is applied
to Eth-CFM packets, and the other rate limited packet types) is
applied.
If 'ethCfmMonitorCommittedAccessRate(2)' is enabled, an Eth-CFM packet
is subjected to one rate limit: the applicable
tmnxCpmProtEthCfmPolRateLimit, as described above. Eth-CFM packets
are neither counted nor discarded when performing the
tmnxCpmProtPolOverallRateLimit rate limiting.rw Bits .1.3.6.1.4.1.6527.3.1.2.4.3.102.1.29 |
sapTmplTlsTblLastChangedThe value of sapTmplTlsTblLastChanged indicates the sysUpTime
at the time of the last modification of sapTmplTlsTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.103 |
sapTmplTlsTableA table that contains VPLS SAP template information. SEQUENCE OF SapTmplTlsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.104 |
sapTmplTlsEntryThis table contains basic information about a specific VPLS SAP
template. An entry in this table is created when an entry is
created in the sapTmplTable with sapTmplType set to 'tls'.
Entry is deleted when corresponding entry is deleted in
sapTmplTable. SapTmplTlsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.104.1 |
sapTmplTlsLastChangedThe value of sapTmplTlsLastChanged indicates the timestamp of last
change to this row in sapTmplTlsTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.1 |
sapTmplTlsMacAgeingThe value of the object sapTmplTlsMacAgeing specifies whether
the MAC aging process is enabled for this SAP template. The value
will be ignored if MAC aging is disabled on service level.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.2 |
sapTmplTlsStpAdminStatusThe value of the object sapTmplTlsStpAdminStatus specifies
whether this SAP participates in the TLS's Spanning Tree
Protocol.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.3 |
sapTmplTlsStpPriorityThe value of the object sapTmplTlsStpPriority specifies
the value of the port priority field which is contained in
the most significant 4 bits of the 16-bit Port ID
associated with this SAP. As only the most significant 4
bits of the value are used, the actual value of this object
is limited to multiples of 16: e.g. the agent rounds down
the value to one of: 0, 16, 32, .. , 224, 240.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.4 |
sapTmplTlsStpPathCostThe value of the object sapTmplTlsStpPathCost specifies the
contribution of this port to the path cost of paths
towards the spanning tree root which include this port.rw INTEGER .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.5 |
sapTmplTlsStpRapidStartThe value of the object sapTmplTlsStpRapidStart specifies
whether Rapid Start is enabled on this SAP. When the value
is 'enabled' the Spanning Tree Protocol state transitions
on this SAP are driven by the value of the 'HelloTime'
instead of the value of 'ForwardDelay', thus allowing a
faster transition into the forwarding state. This
parameter is also referred to as 'adminEdge'.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.6 |
sapTmplTlsStpBpduEncapThe value of the object sapTmplTlsStpBpduEncap specifies the
type of encapsulation used on BPDUs sent out and received
on this SAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.7 |
sapTmplTlsMacAddressLimitThe value of the object sapTmplTlsMacAddressLimit specifies
the maximum number of learned and static entries allowed
in the FDB of this SAP. The value 0 means: no limit for
this SAP.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.8 |
sapTmplTlsMacLearningThe value of the object sapTmplTlsMacLearning specifies
whether the MAC learning process is enabled for this SAP.
The value is ignored if MAC learning is disabled on
service level.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.9 |
sapTmplTlsStpAdminPointToPointThe value of the object sapTmplTlsStpAdminPointToPoint
specifies the administrative point-to-point status of
the LAN segment attached to this sap. The value
'forceTrue' means that this port should always be
treated as if it is connected to a point-to-point link.
The value of 'forceFalse' means that this port should
be treated as having a shared media connection.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.10 |
sapTmplTlsStpAutoEdgesapTmplTlsStpAutoEdge specifies whether this SAP
is enabled for auto-edge detection as defined by Rapid
Spanning Tree Protocol.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.11 |
sapTmplTlsDiscardUnknownSourcewith the object sapTmplTlsMacAddressLimit a limit can be
configured for the max number of MAC addresses that
will be learned on this SAP. When this limit is
reached, packets with unknown source MAC address are
forwarded by default. By setting
sapTmplTlsDiscardUnknownSource to enabled, packets with
unknown source MAC will be dropped in stead.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.12 |
sapTmplTlsL2ptTerminationThe value of the object sapTmplTlsL2ptTermination specifies
whether received Layer 2 Protocol Tunnel (L2PT) pdu's
are terminated on this port or sap.rw TmnxEnabledDisabled (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.13 |
sapTmplTlsBpduTranslationThe value of the object sapTmplTlsBpduTranslation specifies
whether received L2 Protocol Tunnel pdu's are
translated before being sent out on this port or sap.rw TlsBpduTranslation (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.14 |
sapTmplTlsStpRootGuardThe value of the object sapTmplTlsStpRootGuard specifies
whether this port is allowed to become STP root port.
It corresponds to the parameter 'restrictedRole' in 802.1Q.
If set, it can cause lack of spanning tree connectivity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.15 |
sapTmplTlsL2ptProtocolsThe value of the object sapTmplTlsL2ptTermination specifies
which L2 Protocol Tunnel pdu's are terminated
on this port or sap.rw L2ptProtocols (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.16 |
sapTmplTlsLimitMacMoveWhen sapTmplTlsLimitMacMove value is set to 'blockable'
the agent will monitor the MAC relearn rate on this
SAP, and it will block it when the re-learn rate
specified by svcTlsMacMoveMaxRate is exceeded. When
the value is 'nonBlockable' this SAP will not be
blocked, and another blockable SAP will be blocked
instead.rw TlsLimitMacMove (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.17 |
sapTmplTlsLimitMacMoveLevelThe value of the object sapTmplTlsLimitMacMoveLevel
specifies the hierarchy in which SAPs are
blocked when a MAC-move limit is exceeded. When a MAC is
moving among multiple SAPs or spoke-SDPs, the SAP bind
or spoke-SDP bind with the lower level is blocked first.
(tertiary is the lowest)rw TlsLimitMacMoveLevel (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.104.1.18 |
sapTlsEsVidGrpTblLastChangedThe value of sapTlsEsVidGrpTblLastChanged indicates the sysUpTime
at the time of the last modification of sapTlsEsVidGrpTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.105 |
sapTlsEsVidGrpTableA table that contains TLS SAP specific Mutliple VLAN Registration
Protocol (MVRP) end-station VLAN range group information. SEQUENCE OF SapTlsEsVidGrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.106 |
sapTlsEsVidGrpEntryA table that contains TLS SAP specific MVRP end-station VLAN range
group information. SapTlsEsVidGrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.106.1 |
sapTlsEsVidGrpIdThe value of the object sapTlsEsVidGrpId specifies the MVRP
end-station VLAN range group identfier. This identifiter should be
unique within this SAP domain. TmnxVlanGroupId .1.3.6.1.4.1.6527.3.1.2.4.3.106.1.1 |
sapTlsEsVidGrpRowStatusThis value of the object sapTlsEsVidGrpRowStatus specifies the
status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.106.1.2 |
sapTlsEsVidGrpLastChgdThe value of sapTlsEsVidGrpLastChgd indicates the timestamp of last
change to this row in sapTlsEsVidGrpTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.106.1.3 |
sapTlsEsVidGrpStartVlanTagThe value of the object sapTlsEsVidGrpStartVlanTag specifies the
start of the VLAN tag range.
An 'inconsistentValue' error is returned if value of this object is
not specified at the time of row-creation.rw QTag (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.106.1.4 |
sapTlsEsVidGrpEndVlanTagThe value of the object sapTlsEsVidGrpEndVlanTag specifies the
end of the VLAN tag range.
An 'inconsistentValue' error is returned if value of this object is
not specified at the time of row-creation.rw QTag (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.106.1.5 |
sapTmplUserTableA table that contains SAPs which are created using SAP templates. SEQUENCE OF SapTmplUserEntry .1.3.6.1.4.1.6527.3.1.2.4.3.107 |
sapTmplUserEntryThis table provides information about SAP created using a SAP template.
Entries are created and deleted by the system. SapTmplUserEntry .1.3.6.1.4.1.6527.3.1.2.4.3.107.1 |
sapTmplUserCreationOriginThe value sapTmplUserCreationOrigin indicates how this SAP was created
using this specific SAP template.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.107.1.1 |
sapTmplUserCreatorSvcIdThe value sapTmplUserCreatorSvcId indicates the service identifier
which created this particular SAP using this template.
A value of zero indicates that the SAP is not created by a service.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.107.1.2 |
sapIngQosArbitStatsTableThe sapIngQosArbitStatsTable contains ingress QoS arbiter statistics
about SAPs.
In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS
series Packet Processing chip, while 'Qchip' refers to the
Alcatel-Lucent SROS series QoS Queueing Engine chip. SEQUENCE OF SapIngQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.108 |
sapIngQosArbitStatsEntryEach row entry contains ingress statistics about a particular
SAP QoS arbiter. SapIngQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.108.1 |
sapIngQosArbitStatsNameThe value of sapIngQosArbitStatsName specifies the ingress QoS
arbiter of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.1 |
sapIngQosArbitStatsFwdPktsThe value of sapIngQosArbitStatsFwdPkts indicates the number of
forwarded packets, as determined by the SAP ingress policer
control policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.2 |
sapIngQosArbitStatsFwdPktsLoThe value of sapIngQosArbitStatsFwdPktsLo indicates the lower 32
bits of sapIngQosArbitStatsFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.3 |
sapIngQosArbitStatsFwdPktsHiThe value of sapIngQosArbitStatsFwdPktsHi indicates the upper 32
bits of sapIngQosArbitStatsFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.4 |
sapIngQosArbitStatsFwdOctsThe value of sapIngQosArbitStatsFwdOcts indicates the number of
forwarded octets, as determined by the SAP ingress policer
control policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.5 |
sapIngQosArbitStatsFwdOctsLoThe value of sapIngQosArbitStatsFwdOctsLo indicates the lower 32 bits
of sapIngQosArbitStatsFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.6 |
sapIngQosArbitStatsFwdOctsHiThe value of sapIngQosArbitStatsFwdOctsHi indicates the upper 32 bits
of sapIngQosArbitStatsFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.108.1.7 |
sapEgrQosArbitStatsTableThe sapEgrQosArbitStatsTable contains egress QoS arbiter
statistics about SAPs.
In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS
series Packet Processing chip, while 'Qchip' refers to the
Alcatel-Lucent SROS series QoS Queueing Engine chip. SEQUENCE OF SapEgrQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.109 |
sapEgrQosArbitStatsEntryEach row entry contains egress statistics about a particular
SAP QoS arbiter. SapEgrQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.109.1 |
sapEgrQosArbitStatsNameThe value of sapEgrQosArbitStatsName specifies the egress QoS
arbiter of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.1 |
sapEgrQosArbitStatsFwdPktsThe value of sapEgrQosArbitStatsFwdPkts indicates the number of
forwarded packets, as determined by the SAP egress policer
control policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.2 |
sapEgrQosArbitStatsFwdPktsLoThe value of sapEgrQosArbitStatsFwdPktsLo indicates the lower 32
bits of sapEgrQosArbitStatsFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.3 |
sapEgrQosArbitStatsFwdPktsHiThe value of sapEgrQosArbitStatsFwdPktsHi indicates the upper 32
bits of sapEgrQosArbitStatsFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.4 |
sapEgrQosArbitStatsFwdOctsThe value of sapEgrQosArbitStatsFwdOcts indicates the number of
forwarded octets, as determined by the SAP egress policer
control policy, offered by the Pchip to the Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.5 |
sapEgrQosArbitStatsFwdOctsLoThe value of sapEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits
of sapEgrQosArbitStatsFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.6 |
sapEgrQosArbitStatsFwdOctsHiThe value of sapEgrQosArbitStatsFwdOctsHi indicates the upper 32 bits
of sapEgrQosArbitStatsFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.109.1.7 |
sapTlsMvrpTableThis table contains an entry for each VLAN managed
by Multiple VLAN Registration Protocol (MVRP) on the SAP
for the TLS. Entries are dynamically created and
destroyed by the system as the VLANs are registered
or declared in MVRP. SEQUENCE OF SapTlsMvrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.110 |
sapTlsMvrpEntryMVRP specific information about a VLANs managed by
MVRP on a SAP in a TLS. SapTlsMvrpEntry .1.3.6.1.4.1.6527.3.1.2.4.3.110.1 |
sapTlsMvrpVlanIdThe value of sapTlsMvrpVlanId indicates a VLAN which
is being managed by MVRP on this SAP. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.110.1.1 |
sapTlsMvrpDeclaredThe value of sapTlsMvrpDeclared indicates whether the MVRP applicant
on this SAP is declaring this VLAN on behalf of MVRP.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.110.1.2 |
sapTlsMvrpRegisteredThe value of sapTlsMvrpRegistered indicates whether the MVRP registrant
on this SAP has notified MVRP of a registration of this VLAN.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.110.1.3 |
sapTlsMvrpEndStationThe value of sapTlsMvrpEndStation indicates whether the MVRP registrant
on this SAP is registered per end station.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.110.1.4 |
sapPortIdIngQosArbitStatsTableThe sapPortIdIngQosArbitStatsTable contains ingress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS. SEQUENCE OF SapPortIdIngQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.111 |
sapPortIdIngQosArbitStatsEntryEach entry represents the ingress statistics about a
specific SAP's QoS queue. Entries are created when
a arbiter policy is applied to a SAP. SapPortIdIngQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.111.1 |
sapPortIdIngQosArbitNameThe value of sapPortIdIngQosArbitName is used as an
index of the ingress QoS arbiter of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.1 |
sapPortIdIngQosArbitFwdPktsThe value of sapPortIdIngQosArbitFwdPkts indicates
the number of forwarded packets, as determined by the SAP
ingress arbiter policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.2 |
sapPortIdIngQosArbitFwdOctsThe value of sapPortIdIngQosArbitFwdOcts indicates
the number of forwarded octets,as determined by the SAP
ingress arbiter policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.3 |
sapPortIdIngQosArbitFwdPktsLoThe value of sapPortIdIngQosArbitFwdPktsLo indicates the lower 32
bits of sapPortIdIngQosArbitFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.4 |
sapPortIdIngQosArbitFwdPktsHiThe value of sapPortIdIngQosArbitFwdPktsHi indicates the upper 32
bits of sapPortIdIngQosArbitFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.5 |
sapPortIdIngQosArbitFwdOctsLoThe value of sapPortIdIngQosArbitFwdOctsLo indicates the lower 32 bits
of sapPortIdIngQosArbitFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.6 |
sapPortIdIngQosArbitFwdOctsHiThe value of sapPortIdIngQosArbitFwdOctsHi indicates the upper 32 bits
of sapPortIdIngQosArbitFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.111.1.7 |
sapPortIdEgrQosArbitStatsTableThe sapPortIdEgrQosArbitStatsTable contains egress QoS
queue SAP statistics. This table is used when the SAP
is a CCAG or LAG in 'link' mode, or an APS. SEQUENCE OF SapPortIdEgrQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.112 |
sapPortIdEgrQosArbitStatsEntryEach entry represents the egress statistics about a
specific SAP's QoS queue. Entries are created when
a arbiter policy is applied to a SAP. SapPortIdEgrQosArbitStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.112.1 |
sapPortIdEgrQosArbitNameThe value of sapPortIdEgrQosArbitName is used as an
index of the egress QoS arbiter of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.1 |
sapPortIdEgrQosArbitFwdPktsThe value of sapPortIdEgrQosArbitFwdPkts indicates
the number of forwarded packets, as determined by the SAP
egress arbiter policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.2 |
sapPortIdEgrQosArbitFwdOctsThe value of sapPortIdEgrQosArbitFwdOcts indicates
the number of forwarded octets,as determined by the SAP
egress arbiter policy, offered by the Pchip to the
Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.3 |
sapPortIdEgrQosArbitFwdPktsLoThe value of sapPortIdEgrQosArbitFwdPktsLo indicates the lower 32
bits of sapPortIdEgrQosArbitFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.4 |
sapPortIdEgrQosArbitFwdPktsHiThe value of sapPortIdEgrQosArbitFwdPktsHi indicates the upper 32
bits of sapPortIdEgrQosArbitFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.5 |
sapPortIdEgrQosArbitFwdOctsLoThe value of sapPortIdEgrQosArbitFwdOctsLo indicates the lower 32 bits
of sapPortIdEgrQosArbitFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.6 |
sapPortIdEgrQosArbitFwdOctsHiThe value of sapPortIdEgrQosArbitFwdOctsHi indicates the upper 32 bits
of sapPortIdEgrQosArbitFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.112.1.7 |
tmnxGreTunnelTableLastChangedThe value of tmnxGreTunnelTableLastChanged indicates the
sysUpTime at the time of the last modification to
tmnxGreTunnelTable by adding, deleting an entry or change
to a writable object in the table.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.113 |
tmnxGreTunnelTableTable to store the GRE Tunnel entries. SEQUENCE OF TmnxGreTunnelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.114 |
tmnxGreTunnelEntryInformation about a single GRE Tunnel entry. TmnxGreTunnelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.114.1 |
tmnxGreTunnelNameThe value of tmnxGreTunnelName specifies the name of the tunnel
and is part of the index for the table tmnxGreTunnelTable. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.1 |
tmnxGreTunnelRowStatusThe tmnxGreTunnelRowStatus object is used to create and delete
rows in the tmnxGreTunnelTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.2 |
tmnxGreTunnelLastChangedThe value of tmnxGreTunnelLastChanged indicates the sysUpTime
at the time of the last modification of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.3 |
tmnxGreTunnelDstIpAddrTypeThe value of tmnxGreTunnelDstIpAddrType specifies the address
type of address in tmnxGreTunnelDstIpAddr.
This object must be set at the time of creation of an entry.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.4 |
tmnxGreTunnelDstIpAddrThe value of tmnxGreTunnelDstIpAddr specifies the address of the
destination of this GRE tunnel.
This object must be set at the time of creation of an entry.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.5 |
tmnxGreTunnelDescriptionThe value of tmnxGreTunnelDescription specifies the
user-provided description for each tmnxGreTunnelEntry in the
table tmnxGreTunnelTable.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.6 |
tmnxGreTunnelLclIpAddrTypeThe value of tmnxGreTunnelLclIpAddrType specifies the address
type of address in tmnxGreTunnelLclIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.7 |
tmnxGreTunnelLclIpAddrThe value of tmnxGreTunnelLclIpAddr specifies the address of the
local end-point of this GRE tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.8 |
tmnxGreTunnelRemIpAddrTypeThe value of tmnxGreTunnelRemIpAddrType specifies the address
type of address in tmnxGreTunnelRemIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.9 |
tmnxGreTunnelRemIpAddrThe value of tmnxGreTunnelRemIpAddr specifies the address of the
remote end-point of this GRE tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.10 |
tmnxGreTunnelBackupRemIpAddrTypeThe value of tmnxGreTunnelBackupRemIpAddrType specifies the address
type of address in tmnxGreTunnelBackupRemIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.11 |
tmnxGreTunnelBackupRemIpAddrThe value of tmnxGreTunnelBackupRemIpAddr specifies the address of the
backup remote end-point of this GRE tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.12 |
tmnxGreTunnelOperRemIpAddrTypeThe value of tmnxGreTunnelOperRemIpAddrType indicates the address
type of address in tmnxGreTunnelOperRemIpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.13 |
tmnxGreTunnelOperRemIpAddrThe value of tmnxGreTunnelOperRemIpAddr indicates the address of the
operational remote end-point of this GRE tunnel.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.14 |
tmnxGreTunnelDeliverySvcIdThe value of tmnxGreTunnelDeliverySvcId specifies the service-id
of the tunnel delivery service.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.15 |
tmnxGreTunnelAdminStateThe value of tmnxGreTunnelAdminState specifies the administrative
state of the tmnxGreTunnelEntry.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.16 |
tmnxGreTunnelOperStateThe value of tmnxGreTunnelOperState indicates the operational
status of tmnxGreTunnelEntry.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.17 |
tmnxGreTunnelOperFlagsThe value of tmnxGreTunnelOperFlags indicates the reason why the
tunnel is operationally down.ro Bits .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.18 |
tmnxGreTunnelDscpThe value of tmnxGreTunnelDscp specifies DSCP value which will be
used in the GRE tunnel carrying IP header in the delivery service.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.19 |
tmnxGreTunnelReassemblyThe value of tmnxGreTunnelReassembly specifies the maximum number
of seconds to wait to receive all fragments of a particular IPSec
or GRE packet for reassembly.
The tmnxGreTunnelReassembly value set to zero indicates that
reassembly is disabled.
The tmnxGreTunnelReassembly value set default indicates that this
value will be derived from the value of
TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object.
An 'inconsistentValue' error is retuned if the value is not a multiple
of 100 milli-seconds.rw Integer32 (-1|0..5000) UNITS "milli-seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.20 |
tmnxGreTunnelClearDfBitThe value of tmnxGreTunnelClearDfBit specifies whether to clear
Do not Fragment (DF) bit in the outgoing packets in this GRE tunnel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.21 |
tmnxGreTunnelIpMtuThe value of tmnxGreTunnelIpMtu specifies the MTU size for IP packets
for this GRE tunnel.
A value set to zero indicates maximum supported MTU size on the SAP
for this GRE tunnel.rw Unsigned32 (0|512..9000) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.22 |
tmnxGreTunnelHostISAThe value of tmnxGreTunnelHostISA indicates the active ISA
that is being used to host this GRE tunnel.
This object will have a value of zero when this tunnel is operationally
down.ro TmnxHwIndexOrZero (TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.114.1.23 |
tmnxGreTunnelStatsTableTable to store GRE Tunnel statistics SEQUENCE OF TmnxGreTunnelStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.115 |
tmnxGreTunnelStatsEntryStatistics for a single GRE Tunnel. TmnxGreTunnelStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.115.1 |
tmnxGreTunnelPktsTxThe value of tmnxGreTunnelPktsTx indicates the number of
packets this GRE Tunnel has sent.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.1 |
tmnxGreTunnelPktsTxLoThe value of tmnxGreTunnelPktsTxLo indicates lower 32 bits of the
value of tmnxGreTunnelPktsTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.2 |
tmnxGreTunnelPktsTxHiThe value of tmnxGreTunnelPktsTxHi indicates higher 32 bits of the
value of tmnxGreTunnelPktsTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.3 |
tmnxGreTunnelPktsRxThe value of tmnxGreTunnelPktsRx indicates the number of
packets this GRE Tunnel has received.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.4 |
tmnxGreTunnelPktsRxLoThe value of tmnxGreTunnelPktsRxLo indicates lower 32 bits of the
value of tmnxGreTunnelPktsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.5 |
tmnxGreTunnelPktsRxHiThe value of tmnxGreTunnelPktsRxHi indicates higher 32 bits of the
value of tmnxGreTunnelPktsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.6 |
tmnxGreTunnelBytesTxThe value of tmnxGreTunnelBytesTx indicates the number of
bytes this GRE Tunnel has sent.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.7 |
tmnxGreTunnelBytesTxLoThe value of tmnxGreTunnelBytesTxLo indicates lower 32 bits of the
value of tmnxGreTunnelBytesTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.8 |
tmnxGreTunnelBytesTxHiThe value of tmnxGreTunnelBytesTxHi indicates higher 32 bits of the
value of tmnxGreTunnelBytesTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.9 |
tmnxGreTunnelBytesRxThe value of tmnxGreTunnelBytesRx indicates the number of
bytes this GRE Tunnel has received.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.10 |
tmnxGreTunnelBytesRxLoThe value of tmnxGreTunnelBytesRxLo indicates lower 32 bits of the
value of tmnxGreTunnelBytesRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.11 |
tmnxGreTunnelBytesRxHiThe value of tmnxGreTunnelBytesRxHi indicates higher 32 bits of the
value of tmnxGreTunnelBytesRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.12 |
tmnxGreTunnelTxErrorsThe value of tmnxGreTunnelTxErrors indicates the number of
packet transmit errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.13 |
tmnxGreTunnelRxErrorsThe value of tmnxGreTunnelRxErrors indicates the number of
packet receive errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.14 |
tmnxGreTunnelKeyIgnoredRxThe value of tmnxGreTunnelKeyIgnoredRx indicates the number of
packets this GRE Tunnel received and processed ignoring key field.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.15 |
tmnxGreTunnelKeyIgnoredRxLoThe value of tmnxGreTunnelKeyIgnoredRxLo indicates lower 32 bits of the
value of tmnxGreTunnelKeyIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.16 |
tmnxGreTunnelKeyIgnoredRxHiThe value of tmnxGreTunnelKeyIgnoredRxHi indicates higher 32 bits of
the value of tmnxGreTunnelKeyIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.17 |
tmnxGreTunnelSeqIgnoredRxThe value of tmnxGreTunnelSeqIgnoredRx indicates the number of
packets this GRE Tunnel and processed ignoring sequence field.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.18 |
tmnxGreTunnelSeqIgnoredRxLoThe value of tmnxGreTunnelSeqIgnoredRxLo indicates lower 32 bits of the
value of tmnxGreTunnelSeqIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.19 |
tmnxGreTunnelSeqIgnoredRxHiThe value of tmnxGreTunnelSeqIgnoredRxHi indicates higher 32 bits of
the value of tmnxGreTunnelSeqIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.20 |
tmnxGreTunnelVersUnsupRxThe value of tmnxGreTunnelVersUnsupRx indicates the number of
packets this GRE Tunnel received with unsupported GRE version and
were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.21 |
tmnxGreTunnelVersUnsupRxLoThe value of tmnxGreTunnelVersUnsupRxLo indicates lower 32 bits of the
value of tmnxGreTunnelVersUnsupRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.22 |
tmnxGreTunnelVersUnsupRxHiThe value of tmnxGreTunnelVersUnsupRxHi indicates higher 32 bits of
the value of tmnxGreTunnelVersUnsupRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.23 |
tmnxGreTunnelInvalidChksumRxThe value of tmnxGreTunnelInvalidChksumRx indicates the number of
packets this GRE Tunnel received with invalid checksum and
were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.24 |
tmnxGreTunnelInvalidChksumRxLoThe value of tmnxGreTunnelInvalidChksumRxLo indicates lower 32 bits
of the value of tmnxGreTunnelInvalidChksumRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.25 |
tmnxGreTunnelInvalidChksumRxHiThe value of tmnxGreTunnelInvalidChksumRxHi indicates higher 32 bits of
the value of tmnxGreTunnelInvalidChksumRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.26 |
tmnxGreTunnelLoopsRxThe value of tmnxGreTunnelLoopsRx indicates the number of
packets this GRE Tunnel received with payload with destination address
which could result in a loop and were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.27 |
tmnxGreTunnelLoopsRxLoThe value of tmnxGreTunnelLoopsRxLo indicates lower 32 bits of the
value of tmnxGreTunnelLoopsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.28 |
tmnxGreTunnelLoopsRxHiThe value of tmnxGreTunnelLoopsRxHi indicates higher 32 bits of
the value of tmnxGreTunnelLoopsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.29 |
tmnxGreTunnelTooBigTxThe value of tmnxGreTunnelTooBigTx indicates the number of
packets this GRE Tunnel received which were too big to transmit.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.30 |
tmnxGreTunnelTooBigTxLoThe value of tmnxGreTunnelTooBigTxLo indicates lower 32 bits of the
value of tmnxGreTunnelTooBigTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.31 |
tmnxGreTunnelTooBigTxHiThe value of tmnxGreTunnelTooBigTxHi indicates higher 32 bits of
the value of tmnxGreTunnelTooBigTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.115.1.32 |
sapAtmVcRangeTableThe sapAtmVcRangeTable contains ATM Virtual Circuit ranges
for ATM Capture SAP's.
Entries in this table can be created or deleted via SNMP operations.
For a given ATM Capture SAP, the maximum number of ATM VC ranges is
limited to 5. SEQUENCE OF SapAtmVcRangeEntry .1.3.6.1.4.1.6527.3.1.2.4.3.116 |
sapAtmVcRangeEntryEach conceptual row represents an ATM Virtual Circuit range. SapAtmVcRangeEntry .1.3.6.1.4.1.6527.3.1.2.4.3.116.1 |
sapAtmVcRangeIndexThe value of sapAtmVcRangeIndex specifies the identifier of this
ATM Virtual Circuit Range. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.1 |
sapAtmVcRangeRowStatusThe value of sapAtmVcRangeRowStatus specifies
the row status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.2 |
sapAtmVcRangeLastMgmtChangeThe value of sapAtmVcRangeLastMgmtChange indicates the sysUpTime at
the time of the most recent management-initiated change to this
table row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.3 |
sapAtmVcRangeVpiStartThe value of sapAtmVcRangeVpiStart specifies the start
Virtual Path Identifier (VPI) of this range.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.4 |
sapAtmVcRangeVpiEndThe value of sapAtmVcRangeVpiEnd specifies the end
Virtual Path Identifier (VPI) of this range.rw AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.5 |
sapAtmVcRangeVciStartThe value of sapAtmVcRangeVciStart specifies the start
Virtual Circuit Identifier (VCI) of this range.rw AtmVcIdentifier .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.6 |
sapAtmVcRangeVciEndThe value of sapAtmVcRangeVciEnd specifies the end
Virtual Circuit Identifier (VCI) of this range.rw AtmVcIdentifier .1.3.6.1.4.1.6527.3.1.2.4.3.116.1.7 |
msapAtmPlcyTableThe msapAtmPlcyTable has an entry for each managed SAP (MSAP)
policy configured in the system. SEQUENCE OF MsapAtmPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.117 |
msapAtmPlcyEntryEach entry represents the ATM-related configuration for a managed
SAP (MSAP) policy.
Entries in this table are created and destroyed automatically
by the system. MsapAtmPlcyEntry .1.3.6.1.4.1.6527.3.1.2.4.3.117.1 |
msapAtmPlcyLastChangedThe value of msapAtmPlcyLastChanged indicates the sysUpTime
at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.117.1.1 |
msapAtmPlcyIngTrafficDescIndexThe value of msapAtmPlcyIngTrafficDescIndex specifies
the index of the ATM traffic descriptor in the ATM traffic
data encapsulation used for the ingress direction over
the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol Encapsulation over
ATM AAL5 and to the ATM Forum LAN Emulation specification.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.6527.3.1.2.4.3.117.1.2 |
msapAtmPlcyEgrTrafficDescIndexThe value of msapAtmPlcyEgrTrafficDescIndex specifies
the index of the ATM traffic descriptor in the ATM traffic
data encapsulation used for the egress direction over
the AAL5 SSCS layer.
The definition references RFC 2684 Multiprotocol Encapsulation over
ATM AAL5 and to the ATM Forum LAN Emulation specification.rw AtmTrafficDescrParamIndex .1.3.6.1.4.1.6527.3.1.2.4.3.117.1.3 |
msapAtmPlcyOamAlarmCellHandlingThe value of msapAtmPlcyOamAlarmCellHandling specifies the
administrative state of the OAM Alarm Cell handling.
A value of 'up' specifies that the OAM status of a
PVC (Permanent Virtual Circuit) affects the
MSAP operational status and OAM AIS/RDI cell generation upon an
MSAP operational status of down.
A value of 'down' specifies that the OAM status of a PVC will not
affect the operational status of the associated MSAP and no OAM
AIS/RDI cells are generated.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.117.1.4 |
msapAtmPlcyOamPeriodicLoopbackThe value of msapAtmPlcyOamPeriodicLoopback specifies if the
MSAP will run periodic OAM loopbacks.
If enabled, an ATM OAM loopback cell will be transmitted every period
as configured in tAtmSysOamLoopbackPeriod; if a response is not
received and tAtmSysOamRetryDown consecutive retries also result
in failure, the endpoint will transition to the eteAisLoc state;
once in the eteAisLoc state, an ATM OAM loopback cell will be
transmitted every period as configured in tAtmSysOamLoopbackPeriod;
if a response is received for the periodic loopback and
tAtmSysOamRetryUp consecutive retries also each receive a response,
the endpoint will transition back to the up state.rw ServiceAdminStatus (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.117.1.5 |
msapAtmPlcyTblLastChgdThe value of msapAtmPlcyTblLastChgd indicates the
sysUpTime at the time of the last modification of
msapAtmPlcyTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.118 |
sapEthCfmTblLastChangedThe value of sapEthCfmTblLastChanged indicates the sysUpTime
at the time of the last modification of the sapEthCfmTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.119 |
sapEthCfmTableThe sapEthCfmTable consists of the information pertaining to Ethernet
Connectivity Fault Management (CFM) for Service Access Points (SAPs).
This table is a sparse dependent extension of the sapBaseInfoTable. SEQUENCE OF SapEthCfmEntry .1.3.6.1.4.1.6527.3.1.2.4.3.120 |
sapEthCfmEntryThe sapEthCfmEntry contains the Ethernet CFM information for a given
Ethernet encapsulated SAP. SapEthCfmEntry .1.3.6.1.4.1.6527.3.1.2.4.3.120.1 |
sapEthCfmRowLastChangedThe value of sapEthCfmRowLastChanged indicates the sysUpTime at the
time of the last modification to an object for this row.
If no changes were made to the entry since the instantiation of the
row, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.120.1.1 |
sapEthCfmTunnelFaultNotificationThe value of sapEthCfmTunnelFaultNotification specifies whether the SAP
will 'accept (1)' CFM fault notifications from a Tunnel MEP and process
the notifications (i.e. do fault handling and/or fault propagation), or
'ignore (2)' the notification.
Both TIMETRA-SERV-MIB::svcEthCfmTunnelFaultNotification and this object
MUST be set to 'accept (1)' for the SAP to process the notification.
The value 'notApplicable (0)' is used by the system to represent a SAP
which supports ETH-CFM, but not this object. An SNMP Set attempting to
change this object to this value will result in an wrongValue error.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.4.3.120.1.2 |
sapEthCfmMcLagPropHoldTimeRemainThe value of sapEthCfmMcLagPropHoldTimeRemain indicates the remaining
time, in seconds, until MEPs on this SAP will react to a Multi-Chassis
LAG protocol or port change. The value zero (0) indicates there are no
pending events, or the SAP is not a MC-LAG SAP.
This object corresponds to the global configuration timer:
TIMETRA-IEEE8021-CFM-MIB::tmnxDot1agCfmMcLagPropHoldTime.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.120.1.3 |
sapEthCfmAisEnableThe value of sapEthCfmAisEnable specifies whether or not AIS frames are
generated for the SAP based on a facility fault.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.120.1.4 |
sapEthCfmVMepFilterThe value of sapEthCfmVMepFilter specifies whether ETH-CFM PDUs
egressing the sap or sdp-binding at the same level or lower than
that of the configured service MEP (the virtual MEP) should be
discarded or continue to egress.
Only PDUs that were originated from the virtual MEP or from the
networks side of the service will be affected, local down MEP ETH-CFM
transmission are not. When set to 'true' ETH-CFM PDUs with the same or
lower level as the virtual MEP will be discarded. When set to 'false',
egressing ETH-CFM PDUs will pass freely as per the existing ETH-CFM
configuration.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.120.1.5 |
sapEgrEncapGroupTblLastChgdsapEgrEncapGroupTblLastChgd indicates the timestamp of last change to
the sapEgrEncapGroupTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.121 |
sapEgrEncapGroupTableA table that contains SAP egress encapsulation group information. SEQUENCE OF SapEgrEncapGroupEntry .1.3.6.1.4.1.6527.3.1.2.4.3.122 |
sapEgrEncapGroupEntryEncapsulation group information about a specific group of the SAP on
the egress side. SapEgrEncapGroupEntry .1.3.6.1.4.1.6527.3.1.2.4.3.122.1 |
sapEgrEncapGroupNameThe sapEgrEncapGroupName indicates the encapsulation group name on this
SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.1 |
sapEgrEncapGroupRowStatusThis is the Row Status of the entry. This allows creation/deletion of
rows in this table. To create row entries in this table
sapEgrEncapGroupType MUST be specified in the same SNMP SET PDU request
as sapEgrEncapGroupRowStatus or a 'noCreation' error is returned.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.2 |
sapEgrEncapGroupLastChangedsapEgrEncapGroupLastChanged indicates the timestamp of last change to
this row in sapEgrEncapGroupTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.3 |
sapEgrEncapGroupTypeThe value of sapEgrEncapGroupType specifies the encapsulation
group type configured on this SAP on egress side. To create row entries
in this table sapEgrEncapGroupType MUST be specified in the same SNMP
SET PDU request as sapEgrEncapGroupRowStatus or a 'noCreation' error is
returned.rw TSapEgrEncapGroupType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.4 |
sapEgrEncapGroupQosPerMemberThe value of sapEgrEncapGroupQosPerMember specifies how the QoS members
will be added to or deleted from the encapsulation group. If the value
of sapEgrEncapGroupQosPerMember is set to 'true', members are added or
deleted one at a time. If the value of sapEgrEncapGroupQosPerMember is
set to 'false', members are added to the encapsulation group as a range
of contiguous values.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.5 |
sapEgrEncapGroupQosPolicyIdThe value of sapEgrEncapGroupQosPolicyId specifies the QoS policy id
of the encapsulation group on this SAP on egress side.
The value '0' for sapEgrEncapGroupQosPolicyId means that there is no
QoS policy.rw TSapEgrEncapGrpQosPolicyIdOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.6 |
sapEgrEncapGroupSchedulerPolicyThe value of sapEgrEncapGroupSchedulerPolicy specifies the name of
the encapsulation group scheduler policy on this SAP on egress side.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.7 |
sapEgrEncapGroupAggRateLimitThe value of the object sapEgrEncapGroupAggRateLimit specifies the
maximum total rate of all egress encapsulation groups for this SAP.
The value '-1' for sapEgrEncapGroupAggRateLimit means that there is no
limit.rw TPortSchedulerPIR UNITS "kbps" .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.8 |
sapEgrEncapGrpFrameBasedAccntThe value of sapEgrEncapGrpFrameBasedAccnt specifies whether to use
frame-based accounting when evaluating sapEgrEncapGroupAggRateLimit for
all egress queues for this SAP.
If the value is 'false', the default packet-based accounting method
will be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.122.1.9 |
sapEgrEncapGrpMemActTblLastChgdsapEgrEncapGrpMemActTblLastChgd indicates the timestamp of last
change to the sapEgrEncapGrpMemberActTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.123 |
sapEgrEncapGrpMemberActTablesapEgrEncapGrpMemberActTable creates or deletes one or more SAP egress
encapsulation group member row entries in the sapEgrEncapGrpMemberTable
by setting a single row in this table. An SNMP GET on this table will
always return a 'noSuchInstance' error. SEQUENCE OF SapEgrEncapGrpMemberActEntry .1.3.6.1.4.1.6527.3.1.2.4.3.124 |
sapEgrEncapGrpMemberActEntryEncapsulation group member action information about a specific or
a range of groups of the SAP on the egress side.
To create/delete row entries in the sapEgrEncapGrpMemberTable
objects sapEgrEncapGroupBeginMember, sapEgrEncapGroupEndMember
and sapEgrEncapGroupMemberAction MUST all be specified in the same SNMP
SET PDU request or a 'noCreation' error is returned.
To create/delete a single row entry in the sapEgrEncapGrpMemberTable
sapEgrEncapGroupEndMember MUST be same as sapEgrEncapGroupBeginMember. SapEgrEncapGrpMemberActEntry .1.3.6.1.4.1.6527.3.1.2.4.3.124.1 |
sapEgrEncapGroupBeginMemberThe value of sapEgrEncapGroupBeginMember specifies the single
encapsulation member identifier or the start value of encapsulation
member identifier range.rw SvcISID .1.3.6.1.4.1.6527.3.1.2.4.3.124.1.1 |
sapEgrEncapGroupEndMemberThe value of sapEgrEncapGroupEndMember specifies the end value of
encapsulation member identifier range. The value of
sapEgrEncapGroupEndMember MUST be greater than that of
sapEgrEncapGroupBeginMember.rw SvcISID .1.3.6.1.4.1.6527.3.1.2.4.3.124.1.2 |
sapEgrEncapGroupMemberActionThe value of sapEgrEncapGroupMemberAction specifies whether members of
encapsulation group are created or destroyed.
An 'inconsistentValue' error is returned if
sapEgrEncapGroupMemberAction is set and sapEgrEncapGroupBeginMember or
sapEgrEncapGroupEndMember is not set.
An 'inconsistentValue' error is returned if sapEgrEncapGroupEndMember
is set to a value smaller than sapEgrEncapGroupBeginMember.rw TSapEgrEncapGroupActionType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.124.1.3 |
sapEgrEncapGrpMemberTableA table that contains SAP egress encapsulation group member entry
information.
The row entries in this table are created or destroyed by SNMP SET
operations on sapEgrEncapGrpMemberActTable. SEQUENCE OF SapEgrEncapGrpMemberEntry .1.3.6.1.4.1.6527.3.1.2.4.3.126 |
sapEgrEncapGrpMemberEntryEncapsulation group member entry information about a specific group
of the SAP on the egress side. SapEgrEncapGrpMemberEntry .1.3.6.1.4.1.6527.3.1.2.4.3.126.1 |
sapEgrEncapGrpMemberThe value of sapEgrEncapGrpMember indicates the encapsulation member
identifier of the SAP on the egress side. SvcISID .1.3.6.1.4.1.6527.3.1.2.4.3.126.1.1 |
sapEgrEncapGrpRangeEndIdThe value of sapEgrEncapGrpRangeEndId specifies the end value of
encapsulation member identifier range. When the encapsualtion group's
qos-per-member object is set to true, the value of
sapEgrEncapGrpRangeEndId is always equal to the sapEgrEncapGrpMember.
This is because member ranges are not supported when qos-per-member is
enabled.ro SvcISID .1.3.6.1.4.1.6527.3.1.2.4.3.126.1.2 |
sapEgrEncapGrpMemberLastChangedThe value of sapEgrEncapGrpMemberLastChanged indicates the timestamp of
last change to this row in sapEgrEncapGrpMemberEntry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.126.1.3 |
sapAtmPppStatsTableA table that contains ATM SAP PPP statistics information. SEQUENCE OF SapAtmPppStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.127 |
sapAtmPppStatsEntryPPP statistics about a specific ATM SAP. SapAtmPppStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.127.1 |
sapAtmPppStatsRxPacketsThe value of sapAtmPppStatsRxPackets indicates
the number of PPP packets received on this ATM SAP
since the last re-initialization of the local network
management subsystem, or the last time the statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.127.1.1 |
sapAtmPppStatsRxDroppedThe value of sapAtmPppStatsRxPackets indicates
the number of PPP packets dropped on this ATM SAP
since the last re-initialization of the local network
management subsystem, or the last time the statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.127.1.2 |
sapAtmPppStatsTxPacketsThe value of sapAtmPppStatsRxPackets indicates
the number of PPP packets transmitted on this ATM SAP
since the last re-initialization of the local network
management subsystem, or the last time the statistics were
cleared.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.127.1.3 |
tmnxSapGlobalObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.4.3.128 |
tmnxSapGreTunnelCountThe value of tmnxSapGreTunnelCount indicates the number of GRE tunnels
operating in the system at this time.ro Gauge32 .1.3.6.1.4.1.6527.3.1.2.4.3.128.1 |
sapEgrEGBaseStTableThe sapEgrEGBaseStTable contains egress Encap Group basic SAP
statistics at the Group level. This statistics table is valid for Encap
Groups created without enabling sapEgrEncapGroupQosPerMember. In the
descriptions below 'Qchip' refers to the Alcatel-Lucent SROS series
QoS Queueing Engine chip. SEQUENCE OF SapEgrEGBaseStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.129 |
sapEgrEGBaseStEntryEgress statistics about a specific Encap Group of a SAP. SapEgrEGBaseStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.129.1 |
sapEgrEGBaseStLastClearedTimeThe value of sapEgrEGBaseStLastClearedTime indicates the sysUpTime when
the counters in this table were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.1 |
sapEgrEGBaseStCustIdThe value of sapEgrEGBaseStCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.2 |
sapEgrEGBaseStQcDpdInPfPktsThe value of sapEgrEGBaseStQcDpdInPfPkts indicates the number of
in-profile packets dropped by the egress Qchip due to: SAP state,egress
MAC, IP or IPv6 filter, same segment discard,bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.3 |
sapEgrEGBaseStQcDpdInPfPktsLThe value of sapEgrEGBaseStQcDpdInPfPktsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.4 |
sapEgrEGBaseStQcDpdInPfPktsHThe value of sapEgrEGBaseStQcDpdInPfPktsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.5 |
sapEgrEGBaseStQcDpdInPfOctsThe value of sapEgrEGBaseStQcDpdInPfOcts indicates the number of
in-profile octets dropped by the egress Qchip due to: SAP state, egress
MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.6 |
sapEgrEGBaseStQcDpdInPfOctsLThe value of sapEgrEGBaseStQcDpdInPfOctsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.7 |
sapEgrEGBaseStQcDpdInPfOctsHThe value of sapEgrEGBaseStQcDpdInPfOctsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.8 |
sapEgrEGBaseStQcDpdOutPfPktsThe value of sapEgrEGBaseStQcDpdOutPfPkts indicates the number of
out-of-profile packets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.9 |
sapEgrEGBaseStQcDpdOutPfPktsLThe value of sapEgrEGBaseStQcDpdOutPfPktsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.10 |
sapEgrEGBaseStQcDpdOutPfPktsHThe value of sapEgrEGBaseStQcDpdOutPfPktsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.11 |
sapEgrEGBaseStQcDpdOutPfOctsThe value of sapEgrEGBaseStQcDpdOutPfOcts indicates the number of
out-of-profile octets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.12 |
sapEgrEGBaseStQcDpdOutPfOctsLThe value of sapEgrEGBaseStQcDpdOutPfOctsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.13 |
sapEgrEGBaseStQcDpdOutPfOctsHThe value of sapEgrEGBaseStQcDpdOutPfOctsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.14 |
sapEgrEGBaseStQcFwdInPfPktsThe value of sapEgrEGBaseStQcFwdInPfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.15 |
sapEgrEGBaseStQcFwdInPfPktsLThe value of sapEgrEGBaseStQcFwdInPfPktsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.16 |
sapEgrEGBaseStQcFwdInPfPktsHThe value of sapEgrEGBaseStQcFwdInPfPktsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.17 |
sapEgrEGBaseStQcFwdInPfOctsThe value of sapEgrEGBaseStQcFwdInPfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.18 |
sapEgrEGBaseStQcFwdInPfOctsLThe value of sapEgrEGBaseStQcFwdInPfOctsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.19 |
sapEgrEGBaseStQcFwdInPfOctsHThe value of sapEgrEGBaseStQcFwdInPfOctsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.20 |
sapEgrEGBaseStQcFwdOutPfPktsThe value of sapEgrEGBaseStQcFwdOutPfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.21 |
sapEgrEGBaseStQcFwdOutPfPktsLThe value of sapEgrEGBaseStQcFwdOutPfPktsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.22 |
sapEgrEGBaseStQcFwdOutPfPktsHThe value of sapEgrEGBaseStQcFwdOutPfPktsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.23 |
sapEgrEGBaseStQcFwdOutPfOctsThe value of sapEgrEGBaseStQcFwdOutPfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.24 |
sapEgrEGBaseStQcFwdOutPfOctsLThe value of sapEgrEGBaseStQcFwdOutPfOctsL indicates the lower 32 bits
of the value of sapEgrEGBaseStQcFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.25 |
sapEgrEGBaseStQcFwdOutPfOctsHThe value of sapEgrEGBaseStQcFwdOutPfOctsH indicates the higher 32 bits
of the value of sapEgrEGBaseStQcFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.129.1.26 |
sapEgrEGMbrBaseStTableThe sapEgrEGMbrBaseStTable that contains basic Encap Group statistics
per member. This statistics table is valid for Encap Groups created
by enabling sapEgrEncapGroupQosPerMember. In the descriptions below
'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine
chip. SEQUENCE OF SapEgrEGMbrBaseStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.130 |
sapEgrEGMbrBaseStEntryEgress statistics about a specific Encap Group member of a SAP. SapEgrEGMbrBaseStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.130.1 |
sapEgrEGMbrBaseStLstClearedTimeThe value of sapEgrEGMbrBaseStLstClearedTime indicates the sysUpTime
when the counters in this table were last cleared.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.1 |
sapEgrEGMbrBaseStCustIdThe value of sapEgrEGMbrBaseStCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.2 |
sapEgrEGMbrBaseStQcDpdInPfPktsThe value of sapEgrEGMbrBaseStQcDpdInPfPkts indicates the number of
in-profile packets dropped by the egress Qchip due to: SAP state,
gress MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.3 |
sapEgrEGMbrBaseStQcDpdInPfPktsLThe value of sapEgrEGMbrBaseStQcDpdInPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.4 |
sapEgrEGMbrBaseStQcDpdInPfPktsHThe value of sapEgrEGMbrBaseStQcDpdInPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.5 |
sapEgrEGMbrBaseStQcDpdInPfOctsThe value of sapEgrEGMbrBaseStQcDpdInPfOcts indicates the number of
in-profile octets dropped by the egress Qchip due to: SAP state, egress
MAC, IP or IPv6 filter, same segment discard, bad checksum, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.6 |
sapEgrEGMbrBaseStQcDpdInPfOctsLThe value of sapEgrEGMbrBaseStQcDpdInPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.7 |
sapEgrEGMbrBaseStQcDpdInPfOctsHThe value of sapEgrEGMbrBaseStQcDpdInPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.8 |
sapEgrEGMbrBaseStQcDpdOutPfPktsThe value of sapEgrEGMbrBaseStQcDpdOutPfPkts indicates the number of
out-of-profile packets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.9 |
sapEgrEGMbrBaseStQcDpdOutPfPktsLThe value of sapEgrEGMbrBaseStQcDpdOutPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.10 |
sapEgrEGMbrBaseStQcDpdOutPfPktsHThe value of sapEgrEGMbrBaseStQcDpdOutPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.11 |
sapEgrEGMbrBaseStQcDpdOutPfOctsThe value of sapEgrEGMbrBaseStQcDpdOutPfOcts indicates the number of
out-of-profile octets discarded by the egress Qchip due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.12 |
sapEgrEGMbrBaseStQcDpdOutPfOctsLThe value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.13 |
sapEgrEGMbrBaseStQcDpdOutPfOctsHThe value of sapEgrEGMbrBaseStQcDpdOutPfOctsL indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.14 |
sapEgrEGMbrBaseStQcFwdInPfPktsThe value of sapEgrEGMbrBaseStQcFwdInPfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.15 |
sapEgrEGMbrBaseStQcFwdInPfPktsLThe value of sapEgrEGMbrBaseStQcFwdInPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.16 |
sapEgrEGMbrBaseStQcFwdInPfPktsHThe value of sapEgrEGMbrBaseStQcFwdInPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.17 |
sapEgrEGMbrBaseStQcFwdInPfOctsThe value of sapEgrEGMbrBaseStQcFwdInPfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.18 |
sapEgrEGMbrBaseStQcFwdInPfOctsLThe value of sapEgrEGMbrBaseStQcFwdInPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.19 |
sapEgrEGMbrBaseStQcFwdInPfOctsHThe value of sapEgrEGMbrBaseStQcFwdInPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.20 |
sapEgrEGMbrBaseStQcFwdOutPfPktsThe value of sapEgrEGMbrBaseStQcFwdOutPfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.21 |
sapEgrEGMbrBaseStQcFwdOutPfPktsLThe value of sapEgrEGMbrBaseStQcFwdOutPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.22 |
sapEgrEGMbrBaseStQcFwdOutPfPktsHThe value of sapEgrEGMbrBaseStQcFwdOutPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.23 |
sapEgrEGMbrBaseStQcFwdOutPfOctsThe value of sapEgrEGMbrBaseStQcFwdOutPfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress Qchip.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.24 |
sapEgrEGMbrBaseStQcFwdOutPfOctsLThe value of sapEgrEGMbrBaseStQcFwdOutPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.25 |
sapEgrEGMbrBaseStQcFwdOutPfOctsHThe value of sapEgrEGMbrBaseStQcFwdOutPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrBaseStQcFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.130.1.26 |
sapEgrEGQueueStTableThe sapEgrEGQueueStTable contains egress Encap Group queue statistics
at the Group level. This statistics table is valid for Encap Groups
created without enabling sapEgrEncapGroupQosPerMember. SEQUENCE OF SapEgrEGQueueStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.131 |
sapEgrEGQueueStEntryEgress QoS queue statistics about a specific Encap group of a SAP. SapEgrEGQueueStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.131.1 |
sapEgrEGQueueIdThe value of sapEgrEGQueueId indicates the index of the egress QoS
queue of this SAP. TSapEgrQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.1 |
sapEgrEGCustIdThe value of sapEgrEGCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.2 |
sapEgrEGQueueStFwdInPfPktsThe value of sapEgrEGQueueStFwdInPfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.3 |
sapEgrEGQueueStFwdInPfPktsLThe value of sapEgrEGQueueStFwdInPfPktsL indicates the lower 32 bits of
the value of sapEgrEGQueueStFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.4 |
sapEgrEGQueueStFwdInPfPktsHThe value of sapEgrEGQueueStFwdInPfPktsL indicates the higher 32 bits
of the value of sapEgrEGQueueStFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.5 |
sapEgrEGQueueStDpdInPfPktsThe value of sapEgrEGQueueStDpdInPfPkts indicates the number of
in-profile packets discarded by the egress Queue due to: MBS exceeded,
buffer pool limit exceeded etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.6 |
sapEgrEGQueueStDpdInPfPktsLThe value of sapEgrEGQueueStDpdInPfPktsL indicates the lower 32 bits of
the value of sapEgrEGQueueStDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.7 |
sapEgrEGQueueStDpdInPfPktsHThe value of sapEgrEGQueueStDpdInPfPktsH indicates the higher 32 bits
of the value of sapEgrEGQueueStDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.8 |
sapEgrEGQueueStFwdOutPfPktsThe value of sapEgrEGQueueStFwdOutPfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.9 |
sapEgrEGQueueStFwdOutPfPktsLThe value of sapEgrEGQueueStFwdOutPfPktsL indicates the lower 32 bits
of the value of sapEgrEGQueueStFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.10 |
sapEgrEGQueueStFwdOutPfPktsHThe value of sapEgrEGQueueStFwdOutPfPktsH indicates the higher 32 bits
of the value of sapEgrEGQueueStFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.11 |
sapEgrEGQueueStDpdOutPfPktsThe value of sapEgrEGQueueStDpdOutPfPkts indicates the number of
out-of-profile packets discarded by the egress queue due to:
MBS exceeded, buffer pool limit exceeded etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.12 |
sapEgrEGQueueStDpdOutPfPktsLThe value of sapEgrEGQueueStDpdOutPfPktsL indicates the lower 32 bits
of the value of sapEgrEGQueueStDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.13 |
sapEgrEGQueueStDpdOutPfPktsHThe value of sapEgrEGQueueStDpdOutPfPktsH indicates the higher 32 bits
of the value of sapEgrEGQueueStDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.14 |
sapEgrEGQueueStFwdInPfOctsThe value of sapEgrEGQueueStFwdInPfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.15 |
sapEgrEGQueueStFwdInPfOctsLThe value of sapEgrEGQueueStFwdInPfOctsL indicates the lower 32 bits of
the value of sapEgrEGQueueStFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.16 |
sapEgrEGQueueStFwdInPfOctsHThe value of sapEgrEGQueueStFwdInPfOctsH indicates the higher 32 bits
of the value of sapEgrEGQueueStFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.17 |
sapEgrEGQueueStDpdInPfOctsThe value of sapEgrEGQueueStDpdInPfOcts indicates the number of
in-profile octets discarded by the egress queue due to: MBS exceeded,
buffer pool limit exceeded etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.18 |
sapEgrEGQueueStDpdInPfOctsLThe value of sapEgrEGQueueStDpdInPfOctsL indicates the lower 32 bits of
the value of sapEgrEGQueueStDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.19 |
sapEgrEGQueueStDpdInPfOctsHThe value of sapEgrEGQueueStDpdInPfOctsH indicates the higher 32 bits
of the value of sapEgrEGQueueStDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.20 |
sapEgrEGQueueStFwdOutPfOctsThe value of sapEgrEGQueueStFwdOutPfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.21 |
sapEgrEGQueueStFwdOutPfOctsLThe value of sapEgrEGQueueStFwdOutPfOctsL indicates the lower 32 bits
of the value of sapEgrEGQueueStFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.22 |
sapEgrEGQueueStFwdOutPfOctsHThe value of sapEgrEGQueueStFwdOutPfOctsH indicates the higher 32 bits
of the value of sapEgrEGQueueStFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.23 |
sapEgrEGQueueStDpdOutPfOctsThe value of sapEgrEGQueueStDpdOutPfOcts indicates the number of
out-of-profile octets discarded by the egress queue due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.24 |
sapEgrEGQueueStDpdOutPfOctsLThe value of sapEgrEGQueueStDpdOutPfOctsL indicates the lower 32 bits
of the value of sapEgrEGQueueStDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.25 |
sapEgrEGQueueStDpdOutPfOctsHThe value of sapEgrEGQueueStDpdOutPfOctsH indicates the higher 32 bits
of the value of sapEgrEGQueueStDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.131.1.26 |
sapEgrEGMbrQueueStTableThe sapEgrEGMbrQueueStTable contains egress Encap Group member queue
statistics per member. This statistics table is valid for Encap Groups
created by enabling sapEgrEncapGroupQosPerMember. SEQUENCE OF SapEgrEGMbrQueueStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.132 |
sapEgrEGMbrQueueStEntryEgress QoS queue statistics about a specific Encap group member of a
SAP. SapEgrEGMbrQueueStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.132.1 |
sapEgrEGMbrQueueIdThe value of sapEgrEGMbrQueueId indicates the index of the egress QoS
queue of this SAP. TSapEgrQueueId (TIMETRA-SERV-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.1 |
sapEgrEGMbrQueueCustIdThe value of sapEgrEGMbrQueueCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.2 |
sapEgrEGMbrQueueStFwdInPfPktsThe value of sapEgrEGMbrQueueStFwdInPfPkts indicates the number of
in-profile packets (rate below CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.3 |
sapEgrEGMbrQueueStFwdInPfPktsLThe value of sapEgrEGMbrQueueStFwdInPfPktsL indicates the lower 32 bits
of the value of sapEgrEGMbrQueueStFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.4 |
sapEgrEGMbrQueueStFwdInPfPktsHThe value of sapEgrEGMbrQueueStFwdInPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStFwdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.5 |
sapEgrEGMbrQueueStDpdInPfPktsThe value of sapEgrEGMbrQueueStDpdInPfPkts indicates the number of
in-profile packets discarded by the egress queue due to: MBS exceeded,
buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.6 |
sapEgrEGMbrQueueStDpdInPfPktsLThe value of sapEgrEGMbrQueueStDpdInPfPktsL indicates the lower 32 bits
of the value of sapEgrEGMbrQueueStDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.7 |
sapEgrEGMbrQueueStDpdInPfPktsHThe value of sapEgrEGMbrQueueStDpdInPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStDpdInPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.8 |
sapEgrEGMbrQueueStFwdOutPfPktsThe value of sapEgrEGMbrQueueStFwdOutPfPkts indicates the number of
out-of-profile packets (rate above CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.9 |
sapEgrEGMbrQueueStFwdOutPfPktsLThe value of sapEgrEGMbrQueueStFwdOutPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.10 |
sapEgrEGMbrQueueStFwdOutPfPktsHThe value of sapEgrEGMbrQueueStFwdOutPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStFwdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.11 |
sapEgrEGMbrQueueStDpdOutPfPktsThe value of sapEgrEGMbrQueueStDpdOutPfPkts indicates the number of
out-of-profile packets discarded by the egress queue due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.12 |
sapEgrEGMbrQueueStDpdOutPfPktsLThe value of sapEgrEGMbrQueueStDpdOutPfPktsL indicates the lower 32
bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.13 |
sapEgrEGMbrQueueStDpdOutPfPktsHThe value of sapEgrEGMbrQueueStDpdOutPfPktsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStDpdOutPfPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.14 |
sapEgrEGMbrQueueStFwdInPfOctsThe value of sapEgrEGMbrQueueStFwdInPfOcts indicates the number of
in-profile octets (rate below CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.15 |
sapEgrEGMbrQueueStFwdInPfOctsLThe value of sapEgrEGMbrQueueStFwdInPfOctsL indicates the lower 32 bits
of the value of sapEgrEGMbrQueueStFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.16 |
sapEgrEGMbrQueueStFwdInPfOctsHThe value of sapEgrEGMbrQueueStFwdInPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStFwdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.17 |
sapEgrEGMbrQueueStDpdInPfOctsThe value of sapEgrEGMbrQueueStDpdInPfOcts indicates the number of
in-profile octets discarded by the egress queue due to: MBS exceeded,
buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.18 |
sapEgrEGMbrQueueStDpdInPfOctsLThe value of sapEgrEGMbrQueueStDpdInPfOctsL indicates the lower 32 bits
of the value of sapEgrEGMbrQueueStDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.19 |
sapEgrEGMbrQueueStDpdInPfOctsHThe value of sapEgrEGMbrQueueStDpdInPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStDpdInPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.20 |
sapEgrEGMbrQueueStFwdOutPfOctsThe value of sapEgrEGMbrQueueStFwdOutPfOcts indicates the number of
out-of-profile octets (rate above CIR) forwarded by the egress queue.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.21 |
sapEgrEGMbrQueueStFwdOutPfOctsLThe value of sapEgrEGMbrQueueStFwdOutPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.22 |
sapEgrEGMbrQueueStFwdOutPfOctsHThe value of sapEgrEGMbrQueueStFwdOutPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStFwdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.23 |
sapEgrEGMbrQueueStDpdOutPfOctsThe value of sapEgrEGMbrQueueStDpdOutPfOcts indicates the number of
out-of-profile octets discarded by the egress queue due to:
MBS exceeded, buffer pool limit exceeded, etc.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.24 |
sapEgrEGMbrQueueStDpdOutPfOctsLThe value of sapEgrEGMbrQueueStDpdOutPfOctsL indicates the lower 32
bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.25 |
sapEgrEGMbrQueueStDpdOutPfOctsHThe value of sapEgrEGMbrQueueStDpdOutPfOctsH indicates the higher 32
bits of the value of sapEgrEGMbrQueueStDpdOutPfOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.132.1.26 |
sapEgrEGSchedStTableThe sapEgrEGSchedStTable contains egress encapsulation group QoS
scheduler SAP at the Group level. This statistics table is valid for
Encap Groups created without enabling sapEgrEncapGroupQosPerMember. SEQUENCE OF SapEgrEGSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.133 |
sapEgrEGSchedStEntryEgress statistics about a specific QoS scheduler instantiated per
encapsulation group of SAP. SapEgrEGSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.133.1 |
sapEgrEGSchedStNameThe sapEgrEGSchedStName specifies the name of the egress QoS scheduler
of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.1 |
sapEgrEGSchedCustIdThe value of sapEgrEGSchedCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.2 |
sapEgrEGSchedStFwdPktsThe value of sapEgrEGSchedStFwdPkts indicates thee number of packets
forwarded by the egress QoS scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.3 |
sapEgrEGSchedStFwdPktsLThe value of sapEgrEGSchedStFwdPktsL indicates the lower 32 bits of the
value of sapEgrEGSchedStFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.4 |
sapEgrEGSchedStFwdPktsHThe value of sapEgrEGSchedStFwdPktsH indicates the higher 32 bits of
the value of sapEgrEGSchedStFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.5 |
sapEgrEGSchedStFwdOctsThe value of sapEgrEGSchedStFwdOcts indicates the number of octets
forwarded by the egress QoS scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.6 |
sapEgrEGSchedStFwdOctsLThe value of sapEgrEGSchedStFwdOctsL indicates the lower 32 bits of the
value of sapEgrEGSchedStFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.7 |
sapEgrEGSchedStFwdOctsHThe value of sapEgrEGSchedStFwdOctsH indicates the higher 32 bits of
the value of sapEgrEGSchedStFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.133.1.8 |
sapEgrEGMbrSchedStTableThe sapEgrEGMbrSchedStTable contains egress encapsulation group QoS
scheduler SAP per member. This statistics table is valid for Encap
Groups created by enabling sapEgrEncapGroupQosPerMember. SEQUENCE OF SapEgrEGMbrSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.134 |
sapEgrEGMbrSchedStEntryEgress statistics about a specific QoS scheduler instantiated per
encapsulation group member of SAP. SapEgrEGMbrSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.134.1 |
sapEgrEGMbrSchedStNameThe sapEgrEGMbrSchedStName specifies the name of the egress QoS
scheduler of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.1 |
sapEgrEGMbrSchedCustIdThe value of sapEgrEGMbrSchedCustId indicates the Customer ID for the
associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.2 |
sapEgrEGMbrSchedStFwdPktsThe value of sapEgrEGMbrSchedStFwdPkts indicates the number of packets
forwarded by the egress QoS scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.3 |
sapEgrEGMbrSchedStFwdPktsLThe value of sapEgrEGMbrSchedStFwdPktsL indicates the lower 32 bits of
the value of sapEgrEGMbrSchedStFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.4 |
sapEgrEGMbrSchedStFwdPktsHThe value of sapEgrEGMbrSchedStFwdPktsH indicates the higher 32 bits of
the value of sapEgrEGMbrSchedStFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.5 |
sapEgrEGMbrSchedStFwdOctsThe value of sapEgrEGMbrSchedStFwdOcts indicates the number of octets
forwarded by the egress QoS scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.6 |
sapEgrEGMbrSchedStFwdOctsLThe value of sapEgrEGMbrSchedStFwdOctsL indicates the lower 32 bits of
the value of sapEgrEGMbrSchedStFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.7 |
sapEgrEGMbrSchedStFwdOctsHThe value of sapEgrEGMbrSchedStFwdOctsH indicates the higher 32 bits of
the value of sapEgrEGMbrSchedStFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.134.1.8 |
sapPortIdEgrEGSchedStTableThe sapPortIdEgrEGSchedStTable contains egress QoS scheduler SAP
statistics per port at the Group level. This statistics table is valid
for Encap Groups created without enabling sapEgrEncapGroupQosPerMember.
This table is used when the encap group's SAP is a CCAG or LAG in
'link' mode or an APS. SEQUENCE OF SapPortIdEgrEGSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.135 |
sapPortIdEgrEGSchedStEntryEgress statistics about a specific Encap Group's QoS scheduler port
of a SAP. Entries are created when a scheduler policy is applied to an
Encap Group. SapPortIdEgrEGSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.135.1 |
sapPortIdEgrEGSchedStNameThe sapPortIdEgrEGSchedStName specifies the name of the egress
encapsulation group port scheduler of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.1 |
sapPortIdEgrEGSchedCustIdThe value of sapPortIdEgrEGSchedCustId indicates the Customer ID for
the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.2 |
sapPortIdEgrEGSchedFwdPktsThe value of sapPortIdEgrEGSchedFwdPkts indicates the number of packets
forwarded by the egress port scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.3 |
sapPortIdEgrEGSchedFwdPktsLThe value of sapPortIdEgrEGSchedFwdPktsL indicates the lower 32 bits of
the value of sapPortIdEgrEGSchedFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.4 |
sapPortIdEgrEGSchedFwdPktsHThe value sapPortIdEgrEGSchedFwdPktsH indicates the higher 32 bits of
the value of sapPortIdEgrEGSchedFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.5 |
sapPortIdEgrEGSchedFwdOctsThe value sapPortIdEgrEGSchedFwdOcts indicates the number of octets
forwarded by the egress port scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.6 |
sapPortIdEgrEGSchedFwdOctsLThe value of sapPortIdEgrEGSchedFwdOctsL indicates the lower 32 bits of
the value of sapPortIdEgrEGSchedFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.7 |
sapPortIdEgrEGSchedFwdOctsHThe value sapPortIdEgrEGSchedFwdOctsH indicates the higher 32 bits of
the value of sapPortIdEgrEGSchedFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.135.1.8 |
sapPortIdEgrEGMbrSchedStTableThe sapPortIdEgrEGMbrSchedStTable contains egress QoS scheduler SAP
statistics per port. This statistics table is valid for Encap Groups
created by enabling sapEgrEncapGroupQosPerMember. This table fetches
statistics per member. This table is used when the Encap Group's SAP
is a CCAG or LAG in 'link' mode or an APS. SEQUENCE OF SapPortIdEgrEGMbrSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.136 |
sapPortIdEgrEGMbrSchedStEntryEgress statistics about a specific Encap Group member QoS scheduler
port of a SAP. Entries are created when a scheduler policy is applied
to an Encap Group. SapPortIdEgrEGMbrSchedStEntry .1.3.6.1.4.1.6527.3.1.2.4.3.136.1 |
sapPortIdEgrEGMbrSchedStNameThe sapPortIdEgrEGMbrSchedStName specifies the name of the egress
encapsulation group QOS port scheduler of this SAP. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.1 |
sapPortIdEgrEGMbrSchedCustIdThe value of sapPortIdEgrEGMbrSchedCustId indicates the Customer ID for
the associated service.ro TmnxCustId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.2 |
sapPortIdEgrEGMbrSchedFwdPktsThe value of sapPortIdEgrEGMbrSchedFwdPkts indicates the number of
packets forwarded by the egress port scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.3 |
sapPortIdEgrEGMbrSchedFwdPktsLThe value of sapPortIdEgrEGMbrSchedFwdPktsL indicates the lower 32 bits
of the value of sapPortIdEgrEGMbrSchedFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.4 |
sapPortIdEgrEGMbrSchedFwdPktsHThe value sapPortIdEgrEGMbrSchedFwdPktsH indicates the higher 32 bits
of the value of sapPortIdEgrEGMbrSchedFwdPkts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.5 |
sapPortIdEgrEGMbrSchedFwdOctsThe value sapPortIdEgrEGMbrSchedFwdOcts indicates the number of octets
forwarded by the egress port scheduler of this SAP.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.6 |
sapPortIdEgrEGMbrSchedFwdOctsLThe value of sapPortIdEgrEGMbrSchedFwdOctsL indicates the lower 32 bits
of the value of sapPortIdEgrEGMbrSchedFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.7 |
sapPortIdEgrEGMbrSchedFwdOctsHThe value sapPortIdEgrEGMbrSchedFwdOctsH indicates the higher 32 bits
of the value of sapPortIdEgrEGMbrSchedFwdOcts.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.136.1.8 |
sapDefHostTableLastChangedThe value of the object sapDefHostTableLastChanged indicates
the value of sysUpTime at the time of the last modification of
an conceptual row in the sapDefHostTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.137 |
sapDefHostTableA table that contains SAP default host information.
Entries in this table can be created or deleted via SNMP operations.
A row in this table can only be created for a SAP in a group interface,
that is each row in the sapBaseInfoTable where the value of
sapIesIfIndex corresponds to a row in the vRtrIfTable
where the value of vRtrIfType is equal to 'serviceIesGroup'
or 'serviceVprnGroup'. SEQUENCE OF SapDefHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.138 |
sapDefHostEntrySAP default host specific information. SapDefHostEntry .1.3.6.1.4.1.6527.3.1.2.4.3.138.1 |
sapDefHostIpv4SubnetAddrThe value of the object sapDefHostIpv4SubnetAddr specifies
the IPv4 subnet address for this SAP default host.
It must be equal to one of the addresses of the subscriber interface
this SAP belongs to, that is one of its vRiaIpAddress values. IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.138.1.1 |
sapDefHostIpv4SubnetMaskThe value of sapDefHostIpv4SubnetMask specifies the subnet mask
applicable to sapDefHostIpv4SubnetAddr.
It must be equal to the netmask of the subscriber interface address
associated with sapDefHostIpv4SubnetAddr, that is the vRiaNetMask of
the same row in the vRtrIpAddrTable. IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.138.1.2 |
sapDefHostLastChangedThe value of sapDefHostLastChanged indicates the sysUpTime at
the time of the most recent management-initiated change to this
conceptual row.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.138.1.3 |
sapDefHostRowStatusThe value of sapDefHostRowStatus specifies the row status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.138.1.4 |
sapDefHostNextHopIpv4AddrThe value of sapDefHostNextHopIpv4Addr specifies
the next-hop IP address for this SAP default host.
The value all zeroes is not allowed.
A value for sapDefHostNextHopIpv4Addr must be specified when a row
is created and this value cannot be changed afterwards.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.4.3.138.1.5 |
sapTlsSpbTblLastChangedThe value of sapTlsSpbTblLastChanged indicates the sysUpTime
at the time of the last modification of sapTlsSpbTable.
If no changes were made to the entry since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.139 |
sapTlsSpbTableA table that contains TLS SAP specific Shortest Path Bridging
(SPB) information. SEQUENCE OF SapTlsSpbEntry .1.3.6.1.4.1.6527.3.1.2.4.3.140 |
sapTlsSpbEntryA row-entry that contains TLS SAP specific SPB information. SapTlsSpbEntry .1.3.6.1.4.1.6527.3.1.2.4.3.140.1 |
sapTlsSpbRowStatusThis value of the object sapTlsSpbRowStatus specifies the
status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.140.1.1 |
sapTlsSpbLastChgdThe value of sapTlsSpbLastChgd indicates the timestamp of last
change to this row in sapTlsSpbTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.140.1.2 |
sapTlsSpbIfIndexThe value of sapTlsSpbIfIndex indicates the interface index assigned
to this SAP for Shortest Path Bridging.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.140.1.3 |
sapTlsSpbAdminStateThe sapTlsSpbAdminState indicates the desired administrative state
for Shortest Path Bridging on this sap.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.140.1.4 |
tmnxIpTunnelTableLastChangedThe value of tmnxIpTunnelTableLastChanged indicates the
sysUpTime at the time of the last modification to
tmnxIpTunnelTable by adding, deleting an entry or change
to a writable object in the table.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.141 |
tmnxIpTunnelTableThe tmnxIpTunnelTable contains IP Tunnel entries for each SAP.
Entries are created/deleted by the user. SEQUENCE OF TmnxIpTunnelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.142 |
tmnxIpTunnelEntryThe tmnxIpTunnelEntry contains information about a single IP Tunnel
entry. TmnxIpTunnelEntry .1.3.6.1.4.1.6527.3.1.2.4.3.142.1 |
tmnxIpTunnelNameThe value of tmnxIpTunnelName specifies the name of the tunnel
and is part of the index for the table tmnxIpTunnelTable. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.1 |
tmnxIpTunnelRowStatusThe tmnxIpTunnelRowStatus object is used to create and delete
rows in the tmnxIpTunnelTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.2 |
tmnxIpTunnelLastChangedThe value of tmnxIpTunnelLastChanged indicates the sysUpTime
at the time of the last modification of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.3 |
tmnxIpTunnelGreHeaderThe value of tmnxIpTunnelGreHeader specifies whether the tunnel will
include a GRE header in it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.4 |
tmnxIpTunnelDescriptionThe value of tmnxIpTunnelDescription specifies the
user-provided description for each tmnxIpTunnelEntry in the
table tmnxIpTunnelTable.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.5 |
tmnxIpTunnelLclIpAddrTypeThe value of tmnxIpTunnelLclIpAddrType specifies the address
type of address in tmnxIpTunnelLclIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.6 |
tmnxIpTunnelLclIpAddrThe value of tmnxIpTunnelLclIpAddr specifies the address of the
local end-point of this IP tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.7 |
tmnxIpTunnelRemIpAddrTypeThe value of tmnxIpTunnelRemIpAddrType specifies the address
type of address in tmnxIpTunnelRemIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.8 |
tmnxIpTunnelRemIpAddrThe value of tmnxIpTunnelRemIpAddr specifies the address of the
remote end-point of this IP tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.9 |
tmnxIpTunnelBackupRemIpAddrTypeThe value of tmnxIpTunnelBackupRemIpAddrType specifies the address
type of address in tmnxIpTunnelBackupRemIpAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.10 |
tmnxIpTunnelBackupRemIpAddrThe value of tmnxIpTunnelBackupRemIpAddr specifies the address of the
backup remote end-point of this IP tunnel.rw InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.11 |
tmnxIpTunnelOperRemIpAddrTypeThe value of tmnxIpTunnelOperRemIpAddrType indicates the address
type of address in tmnxIpTunnelOperRemIpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.12 |
tmnxIpTunnelOperRemIpAddrThe value of tmnxIpTunnelOperRemIpAddr indicates the address of the
operational remote end-point of this IP tunnel.ro InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.13 |
tmnxIpTunnelDeliverySvcIdThe value of tmnxIpTunnelDeliverySvcId specifies the service-id
of the tunnel delivery service.rw TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.14 |
tmnxIpTunnelAdminStateThe value of tmnxIpTunnelAdminState specifies the administrative
state of the tmnxIpTunnelEntry.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.15 |
tmnxIpTunnelOperStateThe value of tmnxIpTunnelOperState indicates the operational
status of tmnxIpTunnelEntry.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.16 |
tmnxIpTunnelOperFlagsThe value of tmnxIpTunnelOperFlags indicates the reason why the
tunnel is operationally down.ro Bits .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.17 |
tmnxIpTunnelDscpThe value of tmnxIpTunnelDscp specifies DSCP value which will be
used in the IP tunnel carrying IP header in the delivery service.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.18 |
tmnxIpTunnelReassemblyThe value of tmnxIpTunnelReassembly specifies the maximum number
of seconds to wait to receive all fragments of a particular IPSec
or IP packet for reassembly.
The tmnxIpTunnelReassembly value set to zero indicates that
reassembly is disabled.
The tmnxIpTunnelReassembly value set default indicates that this
value will be derived from the value of
TIMETRA-CHASSIS-MIB::tmnxIPsecIsaGrpTunnelReassembly object.
An 'inconsistentValue' error is retuned if the value is not a multiple
of 100 milli-seconds.rw Integer32 (-1|0..5000) UNITS "milli-seconds" .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.19 |
tmnxIpTunnelClearDfBitThe value of tmnxIpTunnelClearDfBit specifies whether to clear
Do not Fragment (DF) bit in the outgoing packets in this IP tunnel.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.20 |
tmnxIpTunnelIpMtuThe value of tmnxIpTunnelIpMtu specifies the MTU size for IP packets
for this IP tunnel.
A value set to zero indicates maximum supported MTU size on the SAP
for this IP tunnel.rw Unsigned32 (0|512..9000) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.21 |
tmnxIpTunnelHostISAThe value of tmnxIpTunnelHostISA indicates the active ISA
that is being used to host this GRE tunnel.
This object will have a value of zero when this tunnel is operationally
down.ro TmnxHwIndexOrZero (TIMETRA-CHASSIS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.142.1.22 |
tmnxIpTnlDstAddrTableLastChangedThe value of tmnxIpTnlDstAddrTableLastChanged indicates the
sysUpTime at the time of the last modification to
tmnxIpTnlDstAddrTable by adding, deleting an entry or change
to a writable object in the table.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.143 |
tmnxIpTnlDstAddrTableThe tmnxIpTnlDstAddrTable contains destination addresses for each IP
tunnel in the system.
Entries are created and deleted by the user. SEQUENCE OF TmnxIpTnlDstAddrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.144 |
tmnxIpTnlDstAddrEntryThe tmnxIpTnlDstAddrEntry contains information about a single
destination address in an IP Tunnel. TmnxIpTnlDstAddrEntry .1.3.6.1.4.1.6527.3.1.2.4.3.144.1 |
tmnxIpTnlDstAddrTypeThe value of tmnxIpTnlDstAddrType specifies the address
type of address in tmnxIpTnlDstAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.4.3.144.1.1 |
tmnxIpTnlDstAddrThe value of tmnxIpTnlDstAddr specifies the address of the
destination of this IP tunnel. InetAddress .1.3.6.1.4.1.6527.3.1.2.4.3.144.1.2 |
tmnxIpTnlDstAddrRowStatusThe tmnxIpTnlDstAddrRowStatus object is used to create and delete
rows in the tmnxIpTnlDstAddrTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.144.1.3 |
tmnxIpTnlDstAddrLastChangedThe value of tmnxIpTnlDstAddrLastChanged indicates the sysUpTime
at the time of the last modification of this entry.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.4.3.144.1.4 |
tmnxIpTunnelStatsTableThe tmnxIpTunnelStatsTable contains statistics entries per IP tunnel. SEQUENCE OF TmnxIpTunnelStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.145 |
tmnxIpTunnelStatsEntryThe tmnxIpTunnelStatsEntry contains statistics information for a
single IP Tunnel. TmnxIpTunnelStatsEntry .1.3.6.1.4.1.6527.3.1.2.4.3.145.1 |
tmnxIpTunnelPktsTxThe value of tmnxIpTunnelPktsTx indicates the number of
packets this IP Tunnel has sent.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.1 |
tmnxIpTunnelPktsTxLoThe value of tmnxIpTunnelPktsTxLo indicates lower 32 bits of the
value of tmnxIpTunnelPktsTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.2 |
tmnxIpTunnelPktsTxHiThe value of tmnxIpTunnelPktsTxHi indicates higher 32 bits of the
value of tmnxIpTunnelPktsTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.3 |
tmnxIpTunnelPktsRxThe value of tmnxIpTunnelPktsRx indicates the number of
packets this IP Tunnel has received.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.4 |
tmnxIpTunnelPktsRxLoThe value of tmnxIpTunnelPktsRxLo indicates lower 32 bits of the
value of tmnxIpTunnelPktsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.5 |
tmnxIpTunnelPktsRxHiThe value of tmnxIpTunnelPktsRxHi indicates higher 32 bits of the
value of tmnxIpTunnelPktsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.6 |
tmnxIpTunnelBytesTxThe value of tmnxIpTunnelBytesTx indicates the number of
bytes this IP Tunnel has sent.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.7 |
tmnxIpTunnelBytesTxLoThe value of tmnxIpTunnelBytesTxLo indicates lower 32 bits of the
value of tmnxIpTunnelBytesTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.8 |
tmnxIpTunnelBytesTxHiThe value of tmnxIpTunnelBytesTxHi indicates higher 32 bits of the
value of tmnxIpTunnelBytesTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.9 |
tmnxIpTunnelBytesRxThe value of tmnxIpTunnelBytesRx indicates the number of
bytes this IP Tunnel has received.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.10 |
tmnxIpTunnelBytesRxLoThe value of tmnxIpTunnelBytesRxLo indicates lower 32 bits of the
value of tmnxIpTunnelBytesRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.11 |
tmnxIpTunnelBytesRxHiThe value of tmnxIpTunnelBytesRxHi indicates higher 32 bits of the
value of tmnxIpTunnelBytesRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.12 |
tmnxIpTunnelTxErrorsThe value of tmnxIpTunnelTxErrors indicates the number of
packet transmit errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.13 |
tmnxIpTunnelRxErrorsThe value of tmnxIpTunnelRxErrors indicates the number of
packet receive errors.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.14 |
tmnxIpTunnelKeyIgnoredRxThe value of tmnxIpTunnelKeyIgnoredRx indicates the number of
packets this IP Tunnel received and processed ignoring key field.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.15 |
tmnxIpTunnelKeyIgnoredRxLoThe value of tmnxIpTunnelKeyIgnoredRxLo indicates lower 32 bits of the
value of tmnxIpTunnelKeyIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.16 |
tmnxIpTunnelKeyIgnoredRxHiThe value of tmnxIpTunnelKeyIgnoredRxHi indicates higher 32 bits of
the value of tmnxIpTunnelKeyIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.17 |
tmnxIpTunnelSeqIgnoredRxThe value of tmnxIpTunnelSeqIgnoredRx indicates the number of
packets this IP Tunnel and processed ignoring sequence field.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.18 |
tmnxIpTunnelSeqIgnoredRxLoThe value of tmnxIpTunnelSeqIgnoredRxLo indicates lower 32 bits of the
value of tmnxIpTunnelSeqIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.19 |
tmnxIpTunnelSeqIgnoredRxHiThe value of tmnxIpTunnelSeqIgnoredRxHi indicates higher 32 bits of
the value of tmnxIpTunnelSeqIgnoredRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.20 |
tmnxIpTunnelVersUnsupRxThe value of tmnxIpTunnelVersUnsupRx indicates the number of
packets this IP Tunnel received with unsupported IP version and
were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.21 |
tmnxIpTunnelVersUnsupRxLoThe value of tmnxIpTunnelVersUnsupRxLo indicates lower 32 bits of the
value of tmnxIpTunnelVersUnsupRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.22 |
tmnxIpTunnelVersUnsupRxHiThe value of tmnxIpTunnelVersUnsupRxHi indicates higher 32 bits of
the value of tmnxIpTunnelVersUnsupRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.23 |
tmnxIpTunnelInvalidChksumRxThe value of tmnxIpTunnelInvalidChksumRx indicates the number of
packets this IP Tunnel received with invalid checksum and
were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.24 |
tmnxIpTunnelInvalidChksumRxLoThe value of tmnxIpTunnelInvalidChksumRxLo indicates lower 32 bits
of the value of tmnxIpTunnelInvalidChksumRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.25 |
tmnxIpTunnelInvalidChksumRxHiThe value of tmnxIpTunnelInvalidChksumRxHi indicates higher 32 bits of
the value of tmnxIpTunnelInvalidChksumRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.26 |
tmnxIpTunnelLoopsRxThe value of tmnxIpTunnelLoopsRx indicates the number of
packets this IP Tunnel received with payload with destination address
which could result in a loop and were dropped.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.27 |
tmnxIpTunnelLoopsRxLoThe value of tmnxIpTunnelLoopsRxLo indicates lower 32 bits of the
value of tmnxIpTunnelLoopsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.28 |
tmnxIpTunnelLoopsRxHiThe value of tmnxIpTunnelLoopsRxHi indicates higher 32 bits of
the value of tmnxIpTunnelLoopsRx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.29 |
tmnxIpTunnelTooBigTxThe value of tmnxIpTunnelTooBigTx indicates the number of
packets this IP Tunnel received which were too big to transmit.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.30 |
tmnxIpTunnelTooBigTxLoThe value of tmnxIpTunnelTooBigTxLo indicates lower 32 bits of the
value of tmnxIpTunnelTooBigTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.31 |
tmnxIpTunnelTooBigTxHiThe value of tmnxIpTunnelTooBigTxHi indicates higher 32 bits of
the value of tmnxIpTunnelTooBigTx object.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.4.3.145.1.32 |
sapTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.4.3 |
sapTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.4.3.0 |
sapCreatedThis trap is sent when a new row is created
in the sapBaseInfoTable. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.1 |
sapDeletedThis trap is sent when an existing row is
deleted from the sapBaseInfoTable. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.2 |
sapStatusChangedThe sapStatusChanged notification is generated
when there is a change in the administrative or
operating status of an SAP.
Notice that this trap is not generated whenever
the SAP operating status change is caused by an
operating status change on the associated access
port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.3 |
sapTlsMacAddrLimitAlarmRaisedThe trap sapTlsMacAddrLimitAlarmRaised is sent whenever
the number of MAC addresses stored in the FDB for this SAP
increases to reach the watermark specified by the object
svcTlsFdbTableFullHighWatermark. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.4 |
sapTlsMacAddrLimitAlarmClearedThe trap sapTlsMacAddrLimitAlarmCleared is sent whenever
the number of MAC addresses stored in the FDB for this SAP
drops to the watermark specified by the object
svcTlsFdbTableFullLowWatermark. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.5 |
sapTlsDHCPLseStEntriesExceededThe sapTlsDHCPLseStEntriesExceeded notification is
generated when the number of DHCP lease states
entries on a given SAP reaches a user configurable
upper limit given by sapTlsDhcpLeasePopulate. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.6 |
sapTlsDHCPLeaseStateOverrideThe sapTlsDHCPLeaseStateOverride notification is
generated when an existing DHCP lease state is
overridden by a new lease state which has the same
IP address but a different MAC address. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.7 |
sapTlsDHCPSuspiciousPcktRcvdThe sapTlsDHCPSuspiciousPcktRcvd notification is
generated when a DHCP packet is received with suspicious
content. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.8 |
sapDHCPLeaseEntriesExceededThe sapDHCPLeaseEntriesExceeded notification is generated
when the number of DHCP lease state entries on a given SAP
reaches a user configurable upper limit. This limit is
given by sapTlsDhcpLeasePopulate for a TLS service and by
TIMETRA-VRTR-MIB::vRtrIfDHCPLeasePopulate for an IES or
VPRN service. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.9 |
sapDHCPLseStateOverrideThe sapDHCPLseStateOverride notification is generated when
an existing DHCP lease state is overridden by a new lease
state which has the same IP address but a different MAC
address. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.10 |
sapDHCPSuspiciousPcktRcvdThe sapDHCPSuspiciousPcktRcvd notification is generated
when a DHCP packet is received with suspicious content. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.11 |
sapDHCPLseStatePopulateErrThe sapDHCPLseStatePopulateErr notification indicates that
the system was unable to update the DHCP Lease State table
with the information contained in the DHCP ACK message.
The DHCP ACK message has been discarded. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.12 |
hostConnectivityLostThe hostConnectivityLost notification indicates that
the system lost the connectivity with the indicated host. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.13 |
hostConnectivityRestoredThe hostConnectivityRestored notification indicates that
the system has restored the connectivity with the
indicated host. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.14 |
sapReceivedProtSrcMacThe sapReceivedProtSrcMac notification is generated when a
protected source MAC is received on a TLS SAP with
sapTlsRestProtSrcMac 'true', or if the TLS
SAP belongs to an SHG with tlsShgRestProtSrcMac 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.15 |
sapStaticHostDynMacConflictThe sapStaticHostDynMacConflict notification indicates
that the system is trying to learn a conflicting IP-only
static host dynamic MAC address
(sapStaticHostDynMacAddress). NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.16 |
sapTlsMacMoveExceededThe sapTlsMacMoveExceeded notification is generated
when the SAP exceeds the TLS svcTlsMacMoveMaxRate. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.17 |
sapDHCPProxyServerErrorThe sapDHCPProxyServerError notification indicates that
the system was unable to proxy DHCP requests. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.18 |
sapDHCPCoAErrorThe sapDHCPCoAError notification indicates that
the system was unable to process a Change of Authorization
(CoA) request from a Radius server. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.19 |
sapDHCPSubAuthErrorThe sapDHCPSubAuthError notification indicates that
the system encountered a problem while trying to
authenticate a subscriber. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.20 |
sapPortStateChangeProcessedThe sapPortStateChangeProcessed notification indicates
that the agent has finished processing an access port
state change event, and that the operating status of
all the affected SAP's has been updated accordingly.
The value of the sapNotifyPortId object indicates the
ID of the port that experienced the state change. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.21 |
sapDHCPLseStateMobilityErrorThe sapDHCPLseStateMobilityError notification indicates
that the system was unable to perform a mobility check
for this lease state. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.22 |
sapCemPacketDefectAlarmGenerated when a CEM SAP alarm condition is detected.
It is generated only when the packet error indicated
by 'sapCemReportAlarmStatus' persists over a 3 second
window. tmnxPortCemStatsReportAlarm specifies, in the
case of APS Ports, the physical port raising the trap,
otherwise it is the SAP's port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.23 |
sapCemPacketDefectAlarmClearGenerated when a CEM SAP alarm condition is cleared.
It is generated only when the packet error indicated
by 'sapCemReportAlarmStatus' no longer persists over
a 10 second window. tmnxPortCemStatsReportAlarm
specifies, in the case of APS Ports, the physical
port raising the trap, otherwise it is the SAP's port. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.24 |
msapStateChangedThe msapStateChanged notification is generated when a
Managed SAP is 'created', 'modified', or 'deleted', with the
value of msapStatus indicated which state it has entered. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.25 |
msapCreationFailureThe trap msapCreationFailure is sent whenever
the system fails to create a managed SAP.
The svcId, svcVpnId, sapPortId and sapEncapValue are
those of the capturing SAP.
The values of sapNotifyPortId and sapNotifyEncapValue
correspond to the managed SAP, and the value of
sapTlsNotifyMacAddr is the MAC address that would have
been associated with the managed SAP, if the creation
would have succeeded. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.26 |
sapHostBGPPeeringSetupFailedThe sapHostBGPPeeringSetupFailed notification indicates
that the system was unable to create a BGP neighbor
and set up BGP peering for the given host. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.27 |
sapTlsDataSapInstStatusChgdThe sapTlsDataSapInstStatusChgd notification is generated
when there is a change in the value of
sapTlsDataSapInstStatus object.
sapTlsDataSapInstLastErr provides information related
to sapTlsDataSapInstStatus object. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.28 |
tmnxGreTunnelOperRemIpChg[CAUSE] The tmnxGreTunnelOperRemIpChg notification is generated when
there is a change in operational remote address
'tmnxGreTunnelOperRemIpAddr' of the tunnel.
[EFFECT] Operational state of the tunnel is not affected.
[RECOVERY] Operator needs to look at the configuration of
tmnxGreTunnelRemIpAddr and tmnxGreTunnelBackupRemIpAddr. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.29 |
sapTunnelStateChange[CAUSE] The sapTunnelStateChange notification is generated when
IPsec/GRE tunnel indicated by sapTunnelNotifyName changes state to
'down' due to sapTunnelNotifyReason.
[EFFECT] IPsec/GRE tunnel associated with the SAP will remain in this
state until a corrective action is taken.
[RECOVERY] Depending on the reason indicated by sapTunnelNotifyReason,
corrective action should be taken. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.30 |
sapAtmPppSessionFailure[CAUSE] The sapAtmPppSessionFailure notification indicates that
the system could not create a new PPPoA session.
The problem is described in the object sapNotifyReason.
The PPP user name is specified in the sapNotifyName.
[EFFECT] The user that attempted to set up the PPP session cannot
establish the desired connection.
[RECOVERY] Depending on the reason indicated by sapNotifyReason,
corrective action may be necessary. However, it is possible that the
failure is caused by the user's equipment configuration or by erroneous
input by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.31 |
sapAtmPppNcpFailure[CAUSE] The sapAtmPppNcpFailure notification indicates that
there is a NCP phase setup problem.
The problem is described in the object sapNotifyReason.
The PPP user name is specified in the sapNotifyName.
[EFFECT] The IP protocol cannot be configured for the user that
attempted to set up the PPP session.
[RECOVERY] Depending on the reason indicated by sapNotifyReason,
corrective action may be necessary. However, it is possible that the
failure is caused by the user's equipment configuration or by erroneous
input by the user. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.32 |
sapIpipeCeIpAddrChange[CAUSE] The sapIpipeCeIpAddrChange notification indicates
that an IP address has been discovered for the local end host
of a specified IPIPE SAP. The IP address type is
specified by sapIpipeCeIpAddrType. The IP address is specified
by sapIpipeCeIpAddress.
[EFFECT] The IP address specified by sapIpipeCeIpAddress and
of type sapIpipeCeIpAddrType has been discovered for the local end
host.
[RECOVERY] No action is required NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.33 |
tmnxIpTunnelOperRemIpChg[CAUSE] The tmnxIpTunnelOperRemIpChg notification is generated when
there is a change in operational remote address
'tmnxIpTunnelOperRemIpAddr' of the tunnel.
[EFFECT] Operational state of the tunnel is not affected.
[RECOVERY] Operator needs to look at the configuration of
tmnxIpTunnelRemIpAddr and tmnxIpTunnelBackupRemIpAddr. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.3.0.38 |
topologyChangeSapMajorStateThe topologyChangeSapMajorState notification is
generated when a SAP has transitioned its state from
learning to forwarding or from forwarding to blocking
or broken. The spanning tree topology has been modified
and it may denote loss of customer access or
redundancy. Check the new topology against the
provisioned topology to determine the severity of
connectivity loss. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.1 |
newRootSapThe newRootSap notification is generated when the
previous root bridge has been aged out and a new root
bridge has been elected. A new root bridge creates a
new spanning tree topology and it may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine the
severity of connectivity loss. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.2 |
topologyChangeSapStateThe topologyChangeSapState notification is generated
when a SAP has transitioned state to blocking or
broken from a state other than forwarding. This event
complements what is not covered by
topologyChangeSapMajorState. The spanning tree
topology has been modified and it may denote loss of
customer access or redundancy. Check the new topology
against the provisioned topology to determine severity
of connectivity loss. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.5 |
receivedTCNThe receivedTCN notification is generated when a SAP
has received TCN from another bridge. This bridge will
either have its configured BPDU with the topology
change flag set if it is a root bridge, or it will
pass TCN to its root bridge. Eventually the address
aging timer for the forwarding database will be made
shorter for a short period of time. No recovery is
needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.6 |
higherPriorityBridgeThe higherPriorityBridge notification is generated when
a customer's device has been configured with a bridge
priority equal to zero. The SAP that the customer's
device is connected through will be blocked. Remove
the customer's device or reconfigure the customer's
bridge priority with a value greater than zero. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.9 |
bridgedTLSThe bridgedTLS notification is generated when a
configuration BPDU has been received that identifies
that another TLS with a different VPNID is attempting
to bridge with this TLS. At least one ESR
participating within one of the TLS that is locally
connected must have an active VCP for this to be seen.
The SAP that the configuration BPDU is received on
will be blocked to prevent the TLS to TLS bridging.
Reconfigure the bridged TLS into a single TLS or
remove the connectivity. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.10 |
sapEncapPVSTThe sapEncapPVST notification is generated when the
SAP receives a BPDU that is PVST encapsulated, after
having received BPDUs that were 802.d encapsulated.
The SAP BPDUs will also be PVST encapsulated. No
recovery is needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.11 |
sapEncapDot1dThe sapEncapDot1d notification is generated when the
SAP receives a BPDU that is 802.1d encapsulated after
having received BPDUs that were PVST encapsulated. The
SAP BPDUs will also be 802.1d encapsulated. No
recovery is needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.12 |
sapReceiveOwnBpduThe sapReceiveOwnBpdu notification is generated when the
SAP STP received it's own BPDU. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.13 |
sapActiveProtocolChangeThe sapActiveProtocolChange notification is generated
when the spanning tree protocol on this SAP changes
from rstp to stp or vise versa. No recovery is
needed. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.30 |
tmnxStpRootGuardViolationThe tmnxStpRootGuardViolation notification is
generated when a SAP which has root-guard configured is
trying to become root (has a better STP priority vector).
The SAP will become alternate and traffic will be blocked. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.35 |
tmnxSapStpExcepCondStateChngThe tmnxSapStpExcepCondStateChng notification is
generated when the value of the object sapTlsStpException
has changed, i.e. when the exception condition
changes on the indicated SAP. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.4.5.0.37 |