TIMETRA-FILTER-MIB
AI MIB Summary
The TIMETRA-FILTER-MIB enables SNMP-based provisioning and monitoring of packet filtering rules, access control lists (ACLs), and traffic classification policies on Alcatel-Lucent Service Router Operating System (SROS) platforms. It facilitates the management of filter table entries, rule matching statistics, and policy enforcement configurations required for ingress and egress traffic control.
This document is the SNMP MIB module to manage and provision Filter features on Alcatel-Lucent SROS systems.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraFilterMIBModule.1.3.6.1.4.1.6527.1.1.3.21
428
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
428 total| Object Name |
|---|
timetraFilterMIBModuleThis document is the SNMP MIB module to manage and provision
Filter features on Alcatel-Lucent SROS systems.
Copyright 2003-2012 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.21 |
tFilterMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.21 |
tFilterMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.21.1 |
tFilterMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.21.2 |
tFilterObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21 |
tIPFilterTableContains a List of all ip filters configured on this system. SEQUENCE OF TIPFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.1 |
tIPFilterEntryInformation about a particular IP Filter entry. Entries are
created/deleted by user. Entries have a presumed StorageType of
nonVolatile. TIPFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.1.1 |
tIPFilterIdUniquely identifies an ip filter.
User configured filters can only have values between (1..65535).
All other values are reserved for system generated filters. TAnyFilterID .1.3.6.1.4.1.6527.3.1.2.21.1.1.1 |
tIPFilterRowStatusThis object allows entries to be created and deleted in the
tIPFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.1.1.2 |
tIPFilterScopeThis object specifies the scope of this filter definition. If defined
as exclusive(1), this filter can be instantiated only once as compared
to the multiple instances that the filter can have if defined as
template(2).rw TItemScope .1.3.6.1.4.1.6527.3.1.2.21.1.1.3 |
tIPFilterDescriptionUser-provided description for this filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.1.1.4 |
tIPFilterDefaultActionThe action to take for packets that do not match any filter entries.
The only allowed values for this field are drop(1) and forward(2).rw TFilterAction .1.3.6.1.4.1.6527.3.1.2.21.1.1.5 |
tIPFilterRadiusInsertPtThe value of tIPFilterRadiusInsertPt specifies at what place the
filter entries received from Radius will be inserted in the filter.
No regular entries, nor Credit Control provided entries can be
configured in this range.
The value 0 means that no Radius provided filter entries can be
inserted in the filter.
If tIPFilterRadiusInsertSize is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.1.1.6 |
tIPFilterRadiusInsertSizeThe value of tIPFilterRadiusInsertSize specifies how many
filter entries received from Radius for subscriber hosts
can be inserted in the filter.
If tIPFilterRadiusInsertPt is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.1.1.7 |
tIPFilterCreditCntrlInsertPtThe value of tIPFilterCreditCntrlInsertPt specifies at what place
the filter entries received from Credit Control for a
particular subscriber host will be inserted in the filter.
No regular entries, nor Radius provided entries can be
configured in this range.
The value 0 means that no Credit Control provided filter entries
can be inserted in the filter.
If tIPFilterCreditCntrlInsertSize is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.1.1.8 |
tIPFilterCreditCntrlInsertSizeThe value of tIPFilterCreditCntrlInsertSize specifies how many
filter entries received from Credit Control can be inserted in the
filter.
If tIPFilterCreditCntrlInsertPt is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.1.1.9 |
tIPFilterSubInsertHighWmarkThe value of the object tIPFilterSubInsertHighWmark
specifies the utilization of the filter ranges for filter
entry insertion, at which a table full alarm will be raised
by the agent.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.21.1.1.10 |
tIPFilterSubInsertLowWmarkThe value of the object tIPFilterSubInsertLowWmark
specifies the utilization of the filter ranges for filter
entry insertion, at which a table full alarm will be cleared
by the agent.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.21.1.1.11 |
tIpFilterCreditCntrlNbrInsertdThe value of the object tIpFilterCreditCntrlNbrInsertd
indicates how many filter entries are currently inserted
in the filter on request the credit control application.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.1.1.12 |
tIpFilterRadiusNbrInsertdThe value of the object tIpFilterRadiusNbrInsertd
indicates how many filter entries are currently inserted
in the filter on request the RADIUS application.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.1.1.13 |
tIpFilterNameThe value of tIpFilterName specifies the name to associate
with this filter.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.1.1.14 |
tIPFilterParamsTableA table of all IP filter match entries for all IP filters. SEQUENCE OF TIPFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.2 |
tIPFilterParamsEntryInformation about a particular IP Filter entry.
Every IP Filter can have zero or more IP Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile. TIPFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.2.1 |
tIPFilterParamsIndexThis is the secondary index for the entry. Every ip filter can have
multiple entries, therefore every ip filter entry is identified by
the tIPFilterId and tIPFilterParamsIndex. TEntryId .1.3.6.1.4.1.6527.3.1.2.21.2.1.1 |
tIPFilterParamsRowStatusThis object allows entries to be created and deleted in the
tIPFilterParamsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.2 |
tIPFilterParamsLogIdThis object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled.rw TFilterLogId .1.3.6.1.4.1.6527.3.1.2.21.2.1.3 |
tIPFilterParamsDescriptionUser-provided description for this filter entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.4 |
tIPFilterParamsActionThe action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the
default for the filter.rw TFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.21.2.1.5 |
tIPFilterParamsForwardNHThe ip-address of the nexthop to which the packet should be forwarded
if it hits this filter entry. The action of this entry should be
'forward' in such a case.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.6 |
tIPFilterParamsForwardNHIndirecttIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/
indirectly reachable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.7 |
tIPFilterParamsRemarkDSCPThe DSCP value that should be remarked in case a packet hits this
filter entry.rw TDSCPFilterActionValue (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.8 |
tIPFilterParamsRemarkDSCPMasktIPFilterParamsRemarkDSCPMask specifies the care bits while remarking
with the DSCP value.rw TDSCPFilterActionValue (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.9 |
tIPFilterParamsRemarkDot1ptIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be
remarked on the packet if it hits this filter entry.rw Dot1PPriority (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.10 |
tIPFilterParamsSourceIpAddrIP address to match the source-ip of the packet.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.11 |
tIPFilterParamsSourceIpMaskIf different from 0, the object tIPFilterParamsSourceIpMask
specifies the IP Mask value for this policy IP Filter entry.
The mask is ANDed with the received source IP address to match
the tIPFilterParamsSourceIpAddr.
If the value of tIPFilterParamsSourceIpMask is 0, and the
value of tIPFilterParamsSrcIpFullMask is non zero then the
value of tIPFilterParamsSrcIpFullMask is used as mask.
If the value of tIPFilterParamsSourceIpMask is non zero,
it will be equal to the mask expressed the object
tIPFilterParamsSrcIpFullMask.
If both tIPFilterParamsSourceIpMask and
tIPFilterParamsSrcIpFullMask are set to 0, not matching is done
on the source Ip address.
If a value is specified for this object, then the value of the
object tIPFilterParamsSrcIpFullMask will be set to reflect
this same mask.rw IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.12 |
tIPFilterParamsDestinationIpAddrIP address to match the destination-ip of the packet.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.13 |
tIPFilterParamsDestinationIpMaskIf different from 0, the object tIPFilterParamsDestinationIpMask
specifies the IP Mask value for this policy IP Filter entry.
The mask is ANDed with the received Destination IP address to match
the tIPFilterParamsDestinationIpAddr.
If the value of tIPFilterParamsDestinationIpMask is 0, and the
value of tIPFilterParamsDestIpFullMask is non zero then the
value of tIPFilterParamsDestIpFullMask is used as mask.
If the value of tIPFilterParamsDestinationIpMask is non zero,
it will be equal to the mask expressed the object
tIPFilterParamsDestIpFullMask.
If both tIPFilterParamsDestinationIpMask and
tIPFilterParamsDestIpFullMask are set to 0, not matching is done
on the Destination Ip address.
If a value is specified for this object, then the value of the
object tIPFilterParamsDestIpFullMask will be set to reflect
this same mask.rw IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.14 |
tIPFilterParamsProtocolIP protocol to match. set to -1 to disable matching IP protocol. If
the protocol is changed the protocol specific parameters are reset.
For instance if protocol is changed from TCP to UDP, then the objects
tIPFilterParamsTcpSyn and tIPFilterParamsTcpAck will be turned off.rw TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.15 |
tIPFilterParamsSourcePortValue1TCP/UDP port value1. The value of this object is used as per the
description for tIPFilterParamsSourcePortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.16 |
tIPFilterParamsSourcePortValue2TCP/UDP port value2. The value of this object is used as per the
description for tIPFilterParamsSourcePortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.17 |
tIPFilterParamsSourcePortOperatorThe operator specifies the manner in which
tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2
are to be used. The value of these latter 2 objects and
tIPFilterParamsSourcePortOperator is used as described in
TTcpUdpPortOperator.rw TTcpUdpPortOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.18 |
tIPFilterParamsDestPortValue1TCP/UDP port value1. The value of this object is used as per the
description for tIPFilterParamsDestPortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.19 |
tIPFilterParamsDestPortValue2TCP/UDP port value2. The value of this object is used as per the
description for tIPFilterParamsDestPortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.20 |
tIPFilterParamsDestPortOperatorThe operator specifies the manner in which
tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2
are to be used. The value of these latter 2 objects and
tIPFilterParamsDestPortOperator is used as described in
TTcpUdpPortOperator.rw TTcpUdpPortOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.21 |
tIPFilterParamsDSCPDSCP to be matched on the packet.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.22 |
tIPFilterParamsFragmentIf enabled, this object matches fragmented/unfragmented packets as per
the value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.24 |
tIPFilterParamsOptionPresentIf enabled, this object matches packets if they have options present
or not as per the value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.25 |
tIPFilterParamsIpOptionValueThe value of the specific ip-option to match.rw TIpOption (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.26 |
tIPFilterParamsIpOptionMaskMask is ANDed with the ip-option before being compared to
tIPFilterParamsIpOptionValue.rw TIpOption (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.27 |
tIPFilterParamsMultipleOptionIf enabled, matches multiple options as per the value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.28 |
tIPFilterParamsTcpSynIf Enabled, matches a TCP Syn as per value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.29 |
tIPFilterParamsTcpAckIf Enabled, matches a TCP Ack as per value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.30 |
tIPFilterParamsIcmpCodeIcmp code to be matched. tIPFilterParamsIcmpCode complements the
object tIPFilterParamsIcmpType. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp code matching is not
enabled.rw INTEGER (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.21.2.1.31 |
tIPFilterParamsIcmpTypeIcmp type to be matched. tIPFilterParamsIcmpType complements the
object tIPFilterParamsIcmpCode. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp type matching is not
enabled.rw INTEGER (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.21.2.1.32 |
tIPFilterParamsCflowdSampleWhen tIPFilterParamsCflowdSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this
filter has been applied. Only packets matching this IP filter entry
are subjected to Cflowd sampling and analysis. A Cflowd profile
controls the sampling and analysis of data flows through the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.33 |
tIPFilterParamsCflowdIfSampleWhen tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this
filter has been applied. Only packets matching this IP filter entry
are subjected to Cflowd sampling and analysis. A Cflowd profile
controls the sampling and analysis of data flows through the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.34 |
tIPFilterParamsForwardNHInterfaceThe interface name for the nexthop to which the packet should be
forwarded if it hits this filter entry. The action of this entry
should be 'forward' in such a case.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.21.2.1.35 |
tIPFilterParamsIngressHitCountThis object indicates the number of times an ingress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.2.1.36 |
tIPFilterParamsEgressHitCountThis object indicates the number of times an egress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.2.1.37 |
tIPFilterParamsLogInstantiatedtIPFilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.38 |
tIPFilterParamsForwardRedPlcytIPFilterParamsForwardRedPlcy specifies the redirect policy to be
used to determine the nexthop.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.39 |
tIPFilterParamsActiveDesttIPFilterParamsActiveDest indicates the IP address of the active
destination for this IP filter. A value of 0 indicates that there
is currently no active destination.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.40 |
tIPFilterParamsFwdSvcIdtIPFilterParamsFwdSvcId indicates the service id of the
destination for this IP filter entry. A value of 0 indicates that
there is currently no active SAP or SDP destination.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.41 |
tIPFilterParamsFwdSapPortIdtIPFilterParamsFwdSapPortId specifies the sap port identity of the
destination for this IP filter entry.
A value of 0 indicates that there is currently no SAP destination
defined. A value different from 0 can only be specified if the value
of the tIPFilterParamsAction object of this entry is 'forward'.
In addition a non-zero value can only be given if the object
tIPFilterParamsFwdSdpBind has a zero value.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.42 |
tIPFilterParamsFwdSapEncapValtIPFilterParamsFwdSapEncapVal specifies the sap port encap value
of the destination SAP for this IP filter entry.
A value different from 0 can only be specified if the value of the
tIPFilterParamsAction object of this entry is 'forward'. In addition
a non-zero value can only be given if the object
tIPFilterParamsFwdSdpBind has a zero value. A value of 0 indicates
that either
1) the sap encapsulation value is not specified when
tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSvcId
have valid values; or
2) that there is no SAP destination.rw TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.43 |
tIPFilterParamsFwdSdpBindtIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the
destination for this IP filter entry.
A value of 0 indicates that there is currently no SDP binding defined.
A value different from 0 can only be specified if the value of the
tIPFilterParamsAction object of this entry is 'forward'. In addition
a non-zero value can only be given if the objects
tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSapEncapVal have a
zero value.rw SdpBindId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.44 |
tIPFilterParamsTimeRangeNametIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry.
A value for this object can only be specified during row creation, and
cannot be altered lateron.
Also, a value is accepted only if the tmnxTimeRangeEntry is defined
in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.45 |
tIPFilterParamsTimeRangeStatetIPFilterParamsTimeRangeState indicates whether or not the entry
is currently in effect.
- timeRangeNotApplic:
no time range is applicable for this entry.
- timeRangeNotActive:
A time range is defined in tIPFilterParamsTimeRangeName, but is not
active at this moment. Consequently the filter entry is not
installed.
- timeRangeActive.
A time range is defined in tIPFilterParamsTimeRangeName, and is
activated successfully.
- timeRangeActiveDownloadFailed:
A time range is defined in tIPFilterParamsTimeRangeName, and is
activated, but the corresponding filter entry could not be
installed due to resource problems.ro TTimeRangeState .1.3.6.1.4.1.6527.3.1.2.21.2.1.46 |
tIPFilterParamsRedirectURLThe value of tIPFilterParamsRedirectURL specifies the URL
to redirect to, when the value of tIPFilterParamsAction is
'httpRedirect'.
Note that the value of tIPFilterParamsRedirectURL is silently cleared
by the system if tIPFilterParamsAction is set to any value other than
httpRedirect.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.2.1.47 |
tIPFilterParamsSrcIpFullMaskIf different from 0, the object tIPFilterParamsSrcIpFullMask
specifies the IP Mask value for this policy IP Filter entry.
The mask is ANDed with the received Source IP address to match
the tIPFilterParamsSourceIpAddr.
If the value of tIPFilterParamsSourceIpMask is non zero,
it will be equal to the mask expressed the object
tIPFilterParamsSrcIpFullMask.
If both tIPFilterParamsSourceIpMask and
tIPFilterParamsSrcIpFullMask are set to 0, no matching is done
on the Source Ip address.
This object should contain consecutive ones and zeros. Both
a regular and an inverse mask is allowed (i.e. the sequence of
consecutive ones can appear at the front or at the end of the
mask).
If a regular mask is specified for tIPFilterParamsSrcIpFullMask
then the value of tIPFilterParamsSourceIpMask will be changed
to reflect this value. If an inverse is specified, the value of
tIPFilterParamsSourceIpMask will be set to 0.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.48 |
tIPFilterParamsDestIpFullMaskIf different from 0, the object tIPFilterParamsDestIpFullMask
specifies the IP Mask value for this policy IP Filter entry.
The mask is ANDed with the received Destination IP address to match
the tIPFilterParamsDestinationIpAddr.
If the value of tIPFilterParamsDestinationIpMask is non zero,
it will be equal to the mask expressed the object
tIPFilterParamsDestIpFullMask.
If both tIPFilterParamsDestinationIpMask and
tIPFilterParamsDestIpFullMask are set to 0, no matching is done
on the Destination Ip address.
This object should contain consecutive ones and zeros. Both
a regular and an inverse mask is allowed (i.e. the sequence of
consecutive ones can appear at the front or at the end of the
mask).
If a regular mask is specified for tIPFilterParamsDestIpFullMask
then the value of tIPFilterParamsDestinationIpMask will be changed
to reflect this value. If an inverse is specified, the value of
tIPFilterParamsDestinationIpMask will be set to 0.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.2.1.49 |
tIPFilterParamsIngrHitByteCountThe value of tIPFilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.2.1.50 |
tIPFilterParamsEgrHitByteCountThe value of tIPFilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.2.1.51 |
tIPFilterParamsFwdRtrIdtIPFilterParamsFwdRtrId specifies, if different from '0',
the router id of the into which the packet should be forwarded
if it hits this filter entry.
The action of this entry should be 'forward' in such a case.rw TmnxVRtrIDOrZero (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.52 |
tIPFilterParamsSrcRouteOptiontIPFilterParamsSrcRouteOption specifies, when enabled,
that this filter should match if a (strict or loose) source route
option is present/not present at any location within the IP header,
as per the value of this object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.2.1.53 |
tIPFilterParamsSrcIpPrefixListThe value of the object tIPFilterParamsSrcIpPrefixList specifies the
ip-prefix-list to be used as match criterion for the source ip address.
If the value of this object is empty then the values of the objects
tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask
will be used as src-ip match criterion.
The value specified for this object must correspond to a prefix-list
defined in tFilterPrefixListTable.
When set to a non zero value, the value of the objects
tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask
will set to their default values.
The value of this object will be set to its default value by the system
if a new (non default) value is provided for any of the objects
tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask.
An attempt to set tIPFilterParamsSrcIpPrefixList to a non-default value
in combination with setting any of tIPFilterParamsSourceIpAddr or
tIPFilterParamsSourceIpMask to (a) non-default value(s) is rejected by
the system.
Also, setting both tIPFilterParamsSrcIpPrefixList and
tIPFilterParamsDstIpPrefixList to non-default values is rejected by the
systemrw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.54 |
tIPFilterParamsDstIpPrefixListThe value of the object tIPFilterParamsDstIpPrefixList specifies the
ip-prefix-list to be used as match criterion for the destination
ip address.
If the value of this object is empty the values of the objects
tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask
will be used as src-ip match criterion.
The value specified for this object must correspond to a prefix-list
defined in tFilterPrefixListTable.
When set to a non zero value, the value of the objects
tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask
will set to their default values.
The value of this object will be set to its default value by the system
if a new (non default) value is provided for any of the objects
tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask.
An attempt to set tIPFilterParamsDstIpPrefixList to a non-default value
in combination with setting any of tIPFilterParamsDestinationIpAddr or
tIPFilterParamsDestinationIpMask to (a) non-default value(s) is
rejected by the system.
Also, setting both tIPFilterParamsDstIpPrefixList and
tIPFilterParamsSrcIpPrefixList to non-default values is rejected by the
systemrw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.2.1.55 |
tMacFilterTableContains a List of all mac filters configured on this system. SEQUENCE OF TMacFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.3 |
tMacFilterEntryInformation about a particular MAC Filter. Entries are created/deleted
by user. Entries have a presumed StorageType of nonVolatile. TMacFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.3.1 |
tMacFilterIdUniquely identifies a mac filter as configures on this system. TMACFilterID .1.3.6.1.4.1.6527.3.1.2.21.3.1.1 |
tMacFilterRowStatusThis object allows entries to be created and deleted in the
tMacFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.3.1.2 |
tMacFilterScopeThis object specifies the scope of this filter definition. If defined
as exclusive(1), this filter can be instantiated only once as compared
to the multiple instances that the filter can have if defined as
template(2).rw TItemScope .1.3.6.1.4.1.6527.3.1.2.21.3.1.3 |
tMacFilterDescriptionUser-provided description for this filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.3.1.4 |
tMacFilterDefaultActionThe action to take for packets that do not match any filter entries.
The only allowed values for this field are drop(1) and forward(2).rw TFilterAction .1.3.6.1.4.1.6527.3.1.2.21.3.1.5 |
tMacFilterTypetMacFilterType specifies which type of entries this mac filter
can contain.
If tMacFilterType is set to 'normal(1)', all match criteria
are accepted except the criteria mentioned below that belong to type
isid(2) and vid(3).
if tMacFilterType is set to 'isid(2)' the only accepted match
criteria for the filter entries are:
- tMacFilterParamsLowISID
- tMacFilterParamsHighISID
If tMacFilterType is set to vid(3) the only accepted match
criteria for the filter entries are:
- tMacFilterParamsInnerTagValue
- tMacFilterParamsInnerTagMask
- tMacFilterParamsOuterTagValue
- tMacFilterParamsOuterTagMask
tMacFilterType can only be changed if the filter is not applied
and has no entries.rw TMacFilterType .1.3.6.1.4.1.6527.3.1.2.21.3.1.6 |
tMacFilterNameThe value of tMacFilterName specifies the name to associate
with this filter.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.3.1.7 |
tMacFilterParamsTableA table of all MAC filter match entries for all MAC filters. SEQUENCE OF TMacFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.4 |
tMacFilterParamsEntryInformation about a particular MAC Filter entry.
Every MAC Filter can have zero or more MAC Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile. TMacFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.4.1 |
tMacFilterParamsIndexThis is the secondary index for the entry. Every mac filter can have
multiple entries, therefore every mac filter entry is identified by
the tMacFilterId and tMacFilterParamsIndex. TEntryId .1.3.6.1.4.1.6527.3.1.2.21.4.1.1 |
tMacFilterParamsRowStatusThis object allows entries to be created and deleted in the
tMacFilterParamsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.2 |
tMacFilterParamsLogIdThis object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled.rw TFilterLogId .1.3.6.1.4.1.6527.3.1.2.21.4.1.3 |
tMacFilterParamsDescriptionUser-provided description for this filter entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.4 |
tMacFilterParamsActionThe action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the
default for the filter.
The value nat(5) is not allowed.rw TFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.21.4.1.5 |
tMacFilterParamsFrameTypeThe type of mac frame for which we are defining this match criteria.
For filter entries in a Mac filter of type tMacFilterType = dot1q or
tMacFilterType qinq the default value for this object is set to
ethernetII (3), and no changes are allowed. In all other cases the
default value is set to e802dot3 (0)rw TFrameType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.6 |
tMacFilterParamsSrcMACSource MAC to match for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.8 |
tMacFilterParamsSrcMACMaskSource MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC.
A zero bit means ignore this bit, do not match. a one bit means
match this bit with tMacFilterParamsSrcMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.9 |
tMacFilterParamsDstMACDestination MAC mask value for this policy MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.10 |
tMacFilterParamsDstMACMaskDestination MAC mask value for this policy MAC filter entry.
The mask is ANDed with the MAC to match tMacFilterParamsDstMAC.
A zero bit means ignore this bit, do not match. a one bit means
match this bit with tMacFilterParamsDstMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.11 |
tMacFilterParamsDot1pValueIEEE 802.1p priority value for this policy MAC filter entry.
Use -1 to disable matching this filter criteria.rw Dot1PPriority (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.12 |
tMacFilterParamsDot1pMaskIEEE 802.1p priority mask value for this policy MAC filter entry.
Use zero to disable matching, use 7 to match everything.rw Dot1PPriority .1.3.6.1.4.1.6527.3.1.2.21.4.1.13 |
tMacFilterParamsEtherTypeEthertype for this policy MAC filter entry. Use -1 to disable matching
by this criteria. This object has no significance if the object
tMacFilterParamsFrameType is not set to Ethernet_II.rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6527.3.1.2.21.4.1.14 |
tMacFilterParamsDsapMAC DSAP to match for this policy MAC filter entry. This object has no
significance if the object tMacFilterParamsFrameType is not set to
802dot2LLC.
In order to reset the value to the default value, both objects
tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified
together to the default value.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.15 |
tMacFilterParamsDsapMaskMAC DSAP mask for this policy MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the
object tMacFilterParamsFrameType is not set to 802dot2LLC.
In order to reset the value to the default value, both objects
tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified
together to the default value.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.16 |
tMacFilterParamsSsapMAC SSAP to match for this policy MAC filter entry. This object has no
significance if the object tMacFilterParamsFrameType is not set to
802dot2LLC.
In order to reset the value to the default value, both objects
tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified
together to the default value.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.17 |
tMacFilterParamsSsapMaskMAC SSAP mask for this policy MAC filter entry. use 0 to disable
matching by this criteria. This object has no significance if the
object tMacFilterParamsFrameType is not set to 802dot2LLC.
In order to reset the value to the default value, both objects
tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified
together to the default value.rw ServiceAccessPoint (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.18 |
tMacFilterParamsSnapPidMAC SNAP PID to match for this policy MAC filter entry. use -1 to
disable matching by this criteria. This object has no significance if
object tMacFilterParamsFrameType is not set to 802dot2SNAP.rw INTEGER (-1 | 0..65535) .1.3.6.1.4.1.6527.3.1.2.21.4.1.19 |
tMacFilterParamsSnapOuiMAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what
to match. Matching can be disabled by the use of the value off(1).
This object has no significance if the object
tMacFilterParamsFrameType is not set to 802dot2SNAP.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.4.1.20 |
tMacFilterParamsIngressHitCountThis object indicates the number of times an ingress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.4.1.21 |
tMacFilterParamsEgressHitCountThis object indicates the number of times an egress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.4.1.22 |
tMacFilterParamsLogInstantiatedtMacFilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.23 |
tMacFilterParamsFwdSvcIdtMacFilterParamsFwdSvcId indicates the service id of the
destination for this Mac filter entry. A value of 0 indicates that
there is currently no active SAP or SDP destination.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.24 |
tMacFilterParamsFwdSapPortIdtMacFilterParamsFwdSapPortId specifies the sap port identity of the
destination for this Mac filter entry. A value of 0 indicates that
there is currently no SAP destination defined.
A value different from 0 can only be specified if the
tMacFilterParamsFwdSvcId object also has a non-zero value,
and if the the value of the tMacFilterParamsAction object of this
entry is 'forward'. In addition a non-zero value can only be given if
the object tMacFilterParamsFwdSdpBind has a zero value.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.25 |
tMacFilterParamsFwdSapEncapValtMacFilterParamsFwdSapEncapVal specifies the sap port encap value
of the destination SAP for this Mac filter entry.
A value different from 0 can only be specified if the
tMacFilterParamsFwdSvcId object also has a non-zero value,
the tMacFilterParamsFwdSapPortId object has a non zero value,
and if the the value of the tMacFilterParamsAction object of this entry
is 'forward'.
In addition a non-zero value can only be given if the object
tMacFilterParamsFwdSdpBind has a zero value.
A value of 0 indicates that either
1) the sap encapsulation value is not specified when
tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSvcId
have valid values; or
2) that there is no SAP destination.rw TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.26 |
tMacFilterParamsFwdSdpBindtMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the
destination for this Mac filter entry. A value of 0 indicates that
there is currently no SDP binding defined.
A value different from 0 can only be specified if the
tMacFilterParamsFwdSvcId object also has a non-zero value,
and if the the value of the tMacFilterParamsAction object of this
entry is 'forward'. In addition a non-zero value can only be given if
the objects tMacFilterParamsFwdSapPortId and
tMacFilterParamsFwdSapEncapVal have a zero value.rw SdpBindId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.27 |
tMacFilterParamsTimeRangeNametMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry.
A value for this object can only be specified during row creation, and
cannot be altered lateron.
Also, a value is accepted only if the tmnxTimeRangeEntry is defined in
the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.28 |
tMacFilterParamsTimeRangeStatetMacFilterParamsTimeRangeState indicates whether or not the entry
is currently in effect.
- timeRangeNotApplic:
no time range is applicable for this entry.
- timeRangeNotActive:
A time range is defined in tMacFilterParamsTimeRangeName, but is not
active at this moment. Consequently the filter entry is not
installed.
- timeRangeActive.
A time range is defined in tMacFilterParamsTimeRangeName, and is
activated successfully.
- timeRangeActiveDownloadFailed:
A time range is defined in tMacFilterParamsTimeRangeName, and is
activated, but the corresponding filter entry could not be
installed due to resource problems.ro TTimeRangeState .1.3.6.1.4.1.6527.3.1.2.21.4.1.29 |
tMacFilterParamsRedirectURLThe value of tMacFilterParamsRedirectURL specifies the URL
to redirect to, when the value of tMacFilterParamsAction is
'httpRedirect'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.4.1.30 |
tMacFilterParamsIngrHitByteCountThe value of tMacFilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.4.1.31 |
tMacFilterParamsEgrHitByteCountThe value of tMacFilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.4.1.32 |
tMacFilterParamsLowISIDThe value of tMacFilterParamsLowISID specifies the lowest value of the
24 bit (0..16777215) service instance identifier for this service that
matches this entry.
The default value of -1 indicates no ISID matching will be performed.
The value of this field can be equal to but not lower than the value
of the tMacFilterParamsHighISID field.
Changing the value of this field might also change the value of
tMacFilterParamsHighISID:
A value of -1 will change the value of tMacFilterParamsHighISID to -1.
Changing the value of this field from -1 to any other value will change
the value of tMacFilterParamsHighISID to this same value.
Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only
be set if tMacFilterType is set to 'isid(1)'.rw SvcISID .1.3.6.1.4.1.6527.3.1.2.21.4.1.33 |
tMacFilterParamsHighISIDThe value of tMacFilterParamsHighISID specifies the highest value of
the 24 bit (0..16777215) service instance identifier for this service
that matches this entry.
The default value of -1 indicates no ISID matching will be performed.
The value of this field can be equal to but not higher than the value
of the tMacFilterParamsLowISID field.
Changing the value of this field might also change the value of
tMacFilterParamsLowISID:
A value of -1 will change the value of tMacFilterParamsLowISID to -1.
Changing the value of this field from -1 to any other value will change
the value of tMacFilterParamsLowISID to this same value.
Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only
be set if tMacFilterType is set to 'isid(1)'.rw SvcISID .1.3.6.1.4.1.6527.3.1.2.21.4.1.34 |
tMacFilterParamsInnerTagValueThe value of tMacFilterParamsInnerTagValue specifies the value to match
against the VID of the second VLAN tag in the packet that
is carried transparently through the service (the second vlan tag after
the service delimiting tags).
This object can only be set if tMacFilterType is set to 'vid(3)'.
The (default) value of '-1' indicates no inner VLAN tag matching will
be performed.rw QTagFullRangeOrNone (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.35 |
tMacFilterParamsInnerTagMaskThe value of tMacFilterParamsInnerTagMask is applied as a mask to VID
of the inner VLAN tag of the packet prior to comparing it
with tMacFilterParamsInnerTagValue. The inner tag is the second tag in
the packet that is carried transparently through the service
(the second tag after the service delimiting tags).
This object can only be set if tMacFilterType is set to 'vid(3)'.rw QTagFullRange .1.3.6.1.4.1.6527.3.1.2.21.4.1.36 |
tMacFilterParamsOuterTagValueThe value of tMacFilterParamsOuterTagValue specifies the value to match
against the VID of the first VLAN tag in the packet that
is carried transparently through the service (the first vlan tag after
the service delimiting tags).
This object can only be set if tMacFilterType is set to 'vid(3)'.
The (default) value of '-1' indicates no outer VLAN tag matching will
be performed.rw QTagFullRangeOrNone (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.4.1.37 |
tMacFilterParamsOuterTagMaskThe value of tMacFilterParamsOuterTagMask is applied as a mask to VID
of the outer VLAN tag of the packet prior to comparing it
with tMacFilterParamsOuterTagValue. The outer tag is the first tag in
the packet that is carried transparently through the service
(the first tag after the service delimiting tags).
This object can only be set if tMacFilterType is set to 'vid(3)'.rw QTagFullRange .1.3.6.1.4.1.6527.3.1.2.21.4.1.38 |
tFilterLogTableA table of all filter logs. SEQUENCE OF TFilterLogEntry .1.3.6.1.4.1.6527.3.1.2.21.5 |
tFilterLogEntryInformation about a particular Filter Log entry. TFilterLogEntry .1.3.6.1.4.1.6527.3.1.2.21.5.1 |
tFilterLogIdThis is the index for the entry. An entry cannot be created with an
id of 0. TFilterLogId .1.3.6.1.4.1.6527.3.1.2.21.5.1.1 |
tFilterLogRowStatusThis object allows entries to be created and deleted in the
tFilterLogTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.5.1.2 |
tFilterLogDestinationThis object specifies the destination of the log.rw TFilterLogDestination .1.3.6.1.4.1.6527.3.1.2.21.5.1.3 |
tFilterLogDescriptionUser-provided description for this filter log entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.5.1.4 |
tFilterLogMaxNumEntriesThe object tFilterLogMaxNumEntries specifies the maximum number
of entries that the log can store.
If tFilterLogDestination is not 'memory(1)' then
the object tFilterLogMaxNumEntries maintains a value of '0',
and Any change attempts will be silently discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.5.1.5 |
tFilterLogSysLogIdThe object tFilterLogSysLogId specifies the syslog Id to be used
as destination.
If tFilterLogDestination is not 'sysLog(2)' then the object
tFilterLogSysLogId maintains a value of '0',
and any change attempts will be silently discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.5.1.6 |
tFilterLogFileIdThe object tFilterLogFileId specifies the File Id to be used
as destination.
If tFilterLogDestination is not 'file(3)' then the object
tFilterLogFileId Imaintains a value of '0',
and any change attempts will be silently discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.5.1.7 |
tFilterLogStopOnFullrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.5.1.8 |
tFilterLogEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.5.1.9 |
tFilterLogSummaryEnabledThe value of tFilterLogSummaryEnabled specifies whether
or not summarization of filter log entries is performed.
Summarization is only allowed in case tFilterLogDestination is set
to syslog.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.5.1.10 |
tFilterLogSummaryCrit1The value of tFilterLogSummaryCrit1 specifies how
filter log entries will be summarized.
This field is only meaningful if the object
tFilterLogSummaryEnabled is set to true.rw TFilterLogSummaryCriterium .1.3.6.1.4.1.6527.3.1.2.21.5.1.11 |
tFilterLogScalars OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.6 |
tFilterLogMaxInstancestFilterLogMaxInstances maintains the maximum allowed instances
of filter logs allowed on the systemro Gauge32 .1.3.6.1.4.1.6527.3.1.2.21.6.1 |
tFilterLogInstancestFilterLogInstances maintains the instances of filter logs
presently existing on the systemro Gauge32 .1.3.6.1.4.1.6527.3.1.2.21.6.2 |
tFilterLogBindingstFilterLogBindings maintains the count of the configured
filter log bindings presently existing on the system. The
bindings get instantiated when the filter is instantiatedro Gauge32 .1.3.6.1.4.1.6527.3.1.2.21.6.3 |
tFilterNotificationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.8 |
tFilterPBRDropReasonUsed by tIPFilterPBRPacketsDrop to report the failure reason code.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.8.1 |
tFilterParmRowThe value of the object tFilterParmRow indicates the OID of the row
status of the applicable filter parameter table. This can be a row from
either one of the following tables:
- tIPFilterParamsTable;
- tMacFilterParamsTable; or
- tIPv6FilterParamsTablero RowPointer (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.8.2 |
tFilterAlarmDescriptionThe value of the object tFilterAlarmDescription is a printable
character string which contains information about the cause of the
problem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.8.3 |
tFilterIdThe value of the object tFilterId, together with the object
tFilterType uniquely defines the filter for which this notification is
generated.ro TFilterID .1.3.6.1.4.1.6527.3.1.2.21.8.4 |
tFilterTypeThe value of the object tFilterType, together with the object
tFilterId uniquely defines the filter for which this notification is
generated.ro TFilterType .1.3.6.1.4.1.6527.3.1.2.21.8.5 |
tFilterSubInsSpaceOwnerThe value of the object tFilterSubInsSpaceOwner, specifies for
which application, capable of inserting filter entries,
this notification is generated.ro TFilterSubInsSpaceOwner .1.3.6.1.4.1.6527.3.1.2.21.8.6 |
tFilterThresholdReachedThe value of the object tFilterThresholdReached, specifies
the threshold reached at the moment this notificastion was
generated.ro INTEGER .1.3.6.1.4.1.6527.3.1.2.21.8.7 |
tFltrFlowSpecProblemThe value of the object tFltrFlowSpecProblem, indicates
which problem has occured while processing a BGP flowspec
NLRI in the filter module.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.8.8 |
tFltrFlowSpecProblemDescriptionThe value of the object tFltrFlowSpecProblem may contain
a more detailed problem description then as given by
tFltrFlowSpecProblem.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.8.9 |
tFltrFLowSpecNLRIThe value of the object tFltrFLowSpecNLRI contains
at most the first 30 octets of the NLRI causing the problem.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.21.8.10 |
tFltrFlowSpecVrtrIdThe value of the object tFltrFlowSpecVrtrId indicates
the virtual router Id to which the NLRI belongs.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.8.11 |
tFilterTimeStampObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.9 |
tFilterDomainLastChangedtimestamp of last change to tFilterObjects.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.9.1 |
tFilterRedirectPolicyTableContains a List of all redirect policies configured on this system. SEQUENCE OF TFilterRedirectPolicyEntry .1.3.6.1.4.1.6527.3.1.2.21.10 |
tFilterRedirectPolicyEntryInformation about a particular redirect policy. Entries are
created/deleted by user. TFilterRedirectPolicyEntry .1.3.6.1.4.1.6527.3.1.2.21.10.1 |
tFilterRedirectPolicytFilterRedirectPolicy uniquely identifies each redirect policy
configured on this system. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.10.1.1 |
tFilterRPRowStatustFilterRPRowStatus allows entries to be created and deleted in the
tFilterRedirectPolicyTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.10.1.2 |
tFilterRPDescriptionUser-provided description for this redirect policy is maintained in
the object tFilterRPDescription.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.10.1.3 |
tFilterRPAdminStatetFilterRPAdminState holds the admin state of the policy. If the
admin state is 'outOfService', the tests will not be conducted.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.10.1.4 |
tFilterRPActiveDesttFilterRPActiveDest indicates the IP address of the active
destination. A value of 0 indicates that there is currently
no active destination.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.21.10.1.5 |
tFilterRedirectDestTableContains a List of all redirect destinations configured on this
system. SEQUENCE OF TFilterRedirectDestEntry .1.3.6.1.4.1.6527.3.1.2.21.11 |
tFilterRedirectDestEntryInformation about a particular Redirect destination. Entries are
created/deleted by user. TFilterRedirectDestEntry .1.3.6.1.4.1.6527.3.1.2.21.11.1 |
tFilterRedirectDesttFilterRedirectDest holds the IP address of the destination
entry. IpAddress .1.3.6.1.4.1.6527.3.1.2.21.11.1.1 |
tFilterRDRowStatustFilterRDRowStatus allows entries to be created and deleted
in the tFilterRedirectDestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.11.1.2 |
tFilterRDDescriptionUser-provided description for this destination is maintained in
the object tFilterRDDescription.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.11.1.3 |
tFilterRDAdminPrioritytFilterRDAdminPriority holds the configured base priority for
the destination.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.11.1.4 |
tFilterRDOperPrioritytFilterRDAdminPriority maintains the operational value of the
priority for this destination. The highest operational priority
across multiple destinations is used as the preferred destination.
A value of '0' is maintained if the destination if tFilterRDOperState
is 'outOfService'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.11.1.5 |
tFilterRDAdminStatetFilterRDAdminState maintains the configured state of the destination.
If the admin state is 'outOfService', the tests for this destination
will not be conducted.rw TmnxAdminState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.11.1.6 |
tFilterRDOperStateThe value of tFilterRDOperState indicates the operational state of
the destination.ro TmnxOperState (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.11.1.7 |
tFilterRedirectSNMPTestTableContains a List of all redirect SNMP tests configured on this
system. SEQUENCE OF TFilterRedirectSNMPTestEntry .1.3.6.1.4.1.6527.3.1.2.21.12 |
tFilterRedirectSNMPTestEntryInformation about a specific SNMP test configured for a destination.
Entries are created/deleted by user. TFilterRedirectSNMPTestEntry .1.3.6.1.4.1.6527.3.1.2.21.12.1 |
tFilterRedirectSNMPTesttFilterRedirectSNMPTest specifies the name of the SNMP test. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.12.1.1 |
tFilterRSTRowStatustFilterRSTRowStatus allows tests to be created and deleted in the
tFilterRedirectSNMPTestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.12.1.2 |
tFilterRSTOIDtFilterRSTOID stores the OID of the object to be fetched from the
destination.
The value of this object can only be changed if the object
tFilterRSTCommunity is changed at the same time.rw OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.12.1.3 |
tFilterRSTCommunityThe value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community
String or the SNMPv3 Context Name used to conduct this SNMP test as
described in RFC2571 and RFC2737.
When the value of tFilterRSTSNMPVersion is 'snmpv1' or 'snmpv2c'
this object represents a community string. When the value of
tFilterRSTSNMPVersion is 'snmpv3' this object represents a SNMPv3
context name.
The value of this object can only be changed if the object
tFilterRSTOID is changed at the same time.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.21.12.1.4 |
tFilterRSTSNMPVersiontFilterRSTSNMPVersion specifies the SNMP PDU format to be used
while conducting the test.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.12.1.5 |
tFilterRSTIntervalThe value of tFilterRSTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end
host.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.6 |
tFilterRSTTimeoutThe value of tFilterRSTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the
far end host. If a reply is not received within this time the
far end host is considered unresponsive.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.7 |
tFilterRSTDropCountThe value of tFilterRSTDropCount specifies the number of
consecutive requests that must fail for the destination to
declared unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.8 |
tFilterRSTHoldDownThe value of tFilterRSTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test
has marked it unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.9 |
tFilterRSTHoldDownRemainThe value of tFilterRSTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before
being used again.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.10 |
tFilterRSTLastActionTimetFilterRSTLastActionTime maintains the time stamp when this test
received a response for a probe sent out.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.12.1.11 |
tFilterRSTLastOIDThe object tFilterRSTLastOID holds the OID received in the
response.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.12.1.12 |
tFilterRSTLastTypetFilterRSTLastType maintains the type of the value received.
A value of none(0) indicated that no value has been receivedro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.12.1.13 |
tFilterRSTLastCounter32ValThe value tFilterRSTLastType is 'counter32'.ro Counter32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.14 |
tFilterRSTLastUnsigned32ValThe value tFilterRSTLastType is 'unsigned32'.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.15 |
tFilterRSTLastTimeTicksValThe value tFilterRSTLastType is 'timeTicks'.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6527.3.1.2.21.12.1.16 |
tFilterRSTLastInt32ValThe value tFilterRSTLastType is 'integer32'.ro Integer32 .1.3.6.1.4.1.6527.3.1.2.21.12.1.17 |
tFilterRSTLastOctetStringValThe value tFilterRSTLastType is 'octetString'.ro OCTET STRING .1.3.6.1.4.1.6527.3.1.2.21.12.1.18 |
tFilterRSTLastIpAddressValThe value tFilterRSTLastType is 'ipAddress'. Although
this seems to be unfriendly for IPv6, we have to
recognize that there are a number of older MIBs that do
contain an IPv4 format address, known as IpAddress.
IPv6 addresses are represented using TAddress or InetAddress,
and so the underlying datatype is OCTET STRING, and their
value would be stored in the tFilterRSTLastOctetStringVal
column.ro IpAddress .1.3.6.1.4.1.6527.3.1.2.21.12.1.19 |
tFilterRSTLastOidValThe value tFilterRSTLastType is 'objectId'.ro OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.12.1.20 |
tFilterRSTLastCounter64ValThe value tFilterRSTLastType is 'counter64'.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.12.1.21 |
tFilterRSTLastOpaqueValThe value tFilterRSTLastType is 'opaque'.ro Opaque .1.3.6.1.4.1.6527.3.1.2.21.12.1.22 |
tFilterRSTLastActiontFilterRSTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained
in tFilterRDOperState.
If the last action was 'disable', the destination may not be
used for tFilterRSTHoldDown seconds.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.12.1.23 |
tFilterRSTLastPrioChangeIf the last action on the operational state of the destination
i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange
maintains the impact that the last test probe made on the
operational priority of the destination.
In other cases, this object has no significance and hence should
be holding the value '0'.ro Integer32 (-255..255) .1.3.6.1.4.1.6527.3.1.2.21.12.1.24 |
tFilterRSTNextRespIndexThe value of tFilterRSTNextRespIndex indicates the next response index
to be used while creating a row in the tFilterRedirectSNMPRespTable.
The value of '-1' means that the maximum number of return values
for this OID are already configured.ro Integer32 (-1|1..2147483647) .1.3.6.1.4.1.6527.3.1.2.21.12.1.25 |
tFilterRedirectSNMPRespTableEach row in this table holds the effect of the test on the
destination for a specific return value.
Each row is created once and cannot be modified after creation.
Any change attempts will be silently discarded. SEQUENCE OF TFilterRedirectSNMPRespEntry .1.3.6.1.4.1.6527.3.1.2.21.13 |
tFilterRedirectSNMPRespEntryInformation about action to be taken for a specific destination
when a specific response is received.
Each row is created once and cannot be modified after creation.
Any change attempts will be silently discarded. TFilterRedirectSNMPRespEntry .1.3.6.1.4.1.6527.3.1.2.21.13.1 |
tFilterRSTRespIdtFilterRSTRespId holds the response value received from
the destination. Integer32 .1.3.6.1.4.1.6527.3.1.2.21.13.1.1 |
tFilterRSTRespRowStatusThis object allows response strings to be specified for a specific
test and the change it will cause to the priority of the destination.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.13.1.2 |
tFilterRSTRespActiontFilterRSTRespAction specifies the type of change that should
be made to the destination priority tFilterRDOperPriority, if
the return value is same as tFilterRSTRespId.
If tFilterRSTRespPrioChange is 0 this field will be set to 'disable'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.13.1.3 |
tFilterRSTRespPrioChangetFilterRSTRespPrioChange specifies the amount of change to
be made to the priority of the destination if the
tFilterRSTRespAction is either 'increase' or 'decrease'.
If tFilterRSTRespAction is 'disable', this field will be set to 0.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.13.1.4 |
tFilterRSTRespOIDThe object tFilterRSTRespOID holds the OID to be received in the
response.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.13.1.5 |
tFilterRSTRespTypetFilterRSTRespType maintains the type of the value to be received.
Note: types 'objectId' and 'counter64' are not supported for now,
and will be rejected when used.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.13.1.6 |
tFilterRSTCounter32ValThe value tFilterRSTRespType is 'counter32'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Counter32 .1.3.6.1.4.1.6527.3.1.2.21.13.1.7 |
tFilterRSTUnsigned32ValThe value tFilterRSTRespType is 'unsigned32'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.13.1.8 |
tFilterRSTTimeTicksValThe value tFilterRSTRespType is 'timeTicks'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6527.3.1.2.21.13.1.9 |
tFilterRSTInt32ValThe value tFilterRSTRespType is 'integer32'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.21.13.1.10 |
tFilterRSTOctetStringValThe value tFilterRSTRespType is 'octetString'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.21.13.1.11 |
tFilterRSTIpAddressValThe value tFilterRSTRespType is 'ipAddress'. Although
this seems to be unfriendly for IPv6, we have to
recognize that there are a number of older MIBs that do
contain an IPv4 format address, known as IpAddress.
IPv6 addresses are represented using TAddress or InetAddress,
and so the underlying datatype is OCTET STRING, and their
value would be stored in the tFilterRSTOctetStringVal
column.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw IpAddress .1.3.6.1.4.1.6527.3.1.2.21.13.1.12 |
tFilterRSTOidValThe response value if tFilterRSTRespType is set to 'objectId'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.13.1.13 |
tFilterRSTCounter64ValThe response value if tFilterRSTRespType is set to 'counter64'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Counter64 .1.3.6.1.4.1.6527.3.1.2.21.13.1.14 |
tFilterRSTOpaqueValThe value tFilterRSTRespType is 'opaque'.
This field cannot be modified after creation. Any change attempts
will be silently discarded.rw Opaque .1.3.6.1.4.1.6527.3.1.2.21.13.1.15 |
tFilterRedirectURLTestTableContains a List of all redirect snmp tests configured on this
system. SEQUENCE OF TFilterRedirectURLTestEntry .1.3.6.1.4.1.6527.3.1.2.21.14 |
tFilterRedirectURLTestEntryInformation about a specific URL test configured for a destination.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile. TFilterRedirectURLTestEntry .1.3.6.1.4.1.6527.3.1.2.21.14.1 |
tFilterRedirectURLTesttFilterRedirectURLTest holds the name of the URL test. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.14.1.1 |
tFilterRUTRowStatustFilterRUTRowStatus allows tests to be created and deleted in the
tFilterRedirectURLTestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.14.1.2 |
tFilterRUTURLThis object holds the URL to be probed.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.14.1.3 |
tFilterRUTHTTPVersionThe HTTP Version to be used while performing the URL test.
The system by default uses HTTP Version 1.1 until explicitly
specified.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.14.1.4 |
tFilterRUTIntervalThe value of tFilterRUTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end
host.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.5 |
tFilterRUTTimeoutThe value of tFilterRUTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the
far end host. If a reply is not received within this time the
far end host is considered unresponsive.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.6 |
tFilterRUTDropCountThe value of tFilterRUTDropCount specifies the number of
consecutive requests that must fail for the destination to
declared unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.7 |
tFilterRUTHoldDownThe value of tFilterRUTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test
has marked it unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.8 |
tFilterRUTHoldDownRemainThe value of tFilterRUTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before
being used again.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.9 |
tFilterRUTLastActionTimetFilterRUTLastActionTime maintains the time stamp when this test
received a response for a probe sent out.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.14.1.10 |
tFilterRUTLastRetCodetFilterRUTLastRetCode holds the return code received in the last
response.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.14.1.11 |
tFilterRUTLastActiontFilterRUTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained
in tFilterRDOperState.
If the last action was 'disable', the destination may not be
used for tFilterRUTHoldDown seconds.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.14.1.12 |
tFilterRUTLastPrioChangeIf the last action on the operational state of the destination
i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange
maintains the impact that the last test probe made on the
operational priority of the destination.
In other cases, this object has no significance and hence should
be holding the value '0'.ro Integer32 (-255..255) .1.3.6.1.4.1.6527.3.1.2.21.14.1.13 |
tFilterRedirectURLRespTableEach row in this table holds the effect of the test on
the destination for a range of return values. SEQUENCE OF TFilterRedirectURLRespEntry .1.3.6.1.4.1.6527.3.1.2.21.15 |
tFilterRedirectURLRespEntryInformation about action to be taken for a specific destination
when a return value within the range specified between
tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode
is received. TFilterRedirectURLRespEntry .1.3.6.1.4.1.6527.3.1.2.21.15.1 |
tFilterRedirectURLLowRespCodetFilterRedirectURLLowRespCode specifies the lower return
code of the range specified by this entry. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.15.1.1 |
tFilterRedirectURLHighRespCodetFilterRedirectURLHighRespCode specifies the higher return
code of the range specified by this entry. Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.15.1.2 |
tFilterRUTRespRowStatustFilterRUTRespRowStatus allows the mapping of a range of
return codes returned from a specific test to the change it
will cause to the priority of the destination.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.15.1.3 |
tFilterRUTRespActionIf the tFilterRUTRespAction is either 'increase(1)' or 'decrease(2)'
tFilterRUTRespPrioChange specifies the offset to be applied to the
destination base priority (tFilterRDAdminPriority) in order to
compute the tFilterRDOperPriority as a result of this test.
If the tFilterRUTRespAction is set to 'disable(3)', on the reception
of the specified response, the destination will be deemed
unusable and the tFilterRDOperPriority will be set to '0'.
The value of tFilterRUTRespAction will be forced by the system to
the value 'disable(3)' if the tFilterRUTRespPrioChange has the value '0'.
Any change attempts will be silently discarded in this case.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.15.1.4 |
tFilterRUTRespPrioChangetFilterRUTRespPrioChange specifies the amount of change
to be made to the priority of the destination if the
tFilterRUTRespAction is either 'increase' or 'decrease'.
If tFilterRUTRespAction is 'disable', tFilterRUTRespPrioChange will
be forced to 0. Any change to tFilterRUTRespPrioChange will be
silently discarded in this case.
Setting the object tFilterRUTRespPrioChange to 0 will cause the value of
tFilterRUTRespAction to be set to 'disable'.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.15.1.5 |
tFilterRedirectPingTestTableContains a List of all redirect Ping tests configured on this
system. SEQUENCE OF TFilterRedirectPingTestEntry .1.3.6.1.4.1.6527.3.1.2.21.16 |
tFilterRedirectPingTestEntryInformation about a specific Ping test configured for a destination.
Entries are created/deleted by user. Entries have a presumed
StorageType of nonVolatile. TFilterRedirectPingTestEntry .1.3.6.1.4.1.6527.3.1.2.21.16.1 |
tFilterRPTRowStatusThis object allows tests to be created and deleted in the
tFilterRedirectPingTestTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.16.1.1 |
tFilterRPTIntervalThe value of tFilterRPTInterval specifies the amount of time
in seconds between consecutive requests sent to the far end
host.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.16.1.2 |
tFilterRPTTimeoutThe value of tFilterRPTTimeout specifies the amount of time
in seconds that is allowed for receiving a response from the
far end host. If a reply is not received within this time the
far end host is considered unresponsive.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.16.1.3 |
tFilterRPTDropCountThe value of tFilterRPTDropCount specifies the number of
consecutive requests that must fail for the destination to
declared unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.16.1.4 |
tFilterRPTHoldDownThe value of tFilterRPTHoldDown specifies the amount of time
in seconds that the system should be held down if any of the test
has marked it unreachable.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.16.1.5 |
tFilterRPTHoldDownRemainThe value of tFilterRPTHoldDownRemain indicates the amount of time
in seconds that the system will remain in held down state before
being used again.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.16.1.6 |
tFilterRPTLastActionTimetFilterRPTLastActionTime maintains the time stamp when this test
received a response for a probe sent out.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.16.1.7 |
tFilterRPTLastActiontFilterRPTLastAction maintains impact that the last test probe
made on the operational status of the destination as maintained
in tFilterRDOperState.
If the last action was 'disable', the destination may not be
used for tFilterRPTHoldDown seconds.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.16.1.8 |
tAutoIPFilterEntryTableDefines the Alcatel-Lucent SROS series automatic IP filters
for providing, via SNMP, the capability of gathering
information regarding the same.
tAutoIPFilterEntryTable holds a list of all automatic
filter entries being used for filtering.
This table is obsoleted in release 3.0.obsolete SEQUENCE OF TAutoIPFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.17 |
tAutoIPFilterEntryDefines an entry in the tAutoIPFilterEntryTable.
Entries are created and deleted in this table by the
system.
Each entry provides information about a single active
automatic filter entry.
This entry is obsoleted in release 3.0.obsolete TAutoIPFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.17.1 |
tAutoIPFilterIdtAutoIPFilterId serves as a primary index and uniquely
identifies an application point such as a routed
interface or a SAP.
This object is obsoleted in release 3.0.obsolete TFilterID .1.3.6.1.4.1.6527.3.1.2.21.17.1.1 |
tAutoIPFilterEntrySourceIpAddrtAutoIPFilterEntrySourceIpAddr specifies the source
ip-address and also serves as the secondary index to
this table.
This object is obsoleted in release 3.0.obsolete IpAddress .1.3.6.1.4.1.6527.3.1.2.21.17.1.2 |
tAutoIPFilterEntrySourceIpMaskThe value of tAutoIPFilterEntrySourceIpMask indicates the number
of bits to be matched in the source ip-address.
This object is obsoleted in release 3.0.roobsolete IpAddressPrefixLength (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.17.1.3 |
tIPv6FilterTableContains a List of all IPv6 filters configured on this system. SEQUENCE OF TIPv6FilterEntry .1.3.6.1.4.1.6527.3.1.2.21.18 |
tIPv6FilterEntryInformation about a particular IPv6 Filter entry. Entries are
created/deleted by user. Entries have a presumed StorageType of
nonVolatile. TIPv6FilterEntry .1.3.6.1.4.1.6527.3.1.2.21.18.1 |
tIPv6FilterIdThe value of the object tIPv6FilterId uniquely identifies a
IPv6 filter on this system. TIPFilterID .1.3.6.1.4.1.6527.3.1.2.21.18.1.1 |
tIPv6FilterRowStatusThe value of the object tIPv6FilterRowStatus specifies
the status of the IPv6 filter. The object allows
entries to be created and deleted in the tIPv6FilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.18.1.2 |
tIPv6FilterScopeThe value of the object tIPv6FilterScope specifies the
scope of this filter definition. If defined as exclusive(1),
this filter can be instantiated only once as compared
to the multiple instances that the filter can have if defined as
template(2).rw TItemScope .1.3.6.1.4.1.6527.3.1.2.21.18.1.3 |
tIPv6FilterDescriptionThe value of the object tIPv6FilterDescription specifies
a user-provided description for this filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.18.1.4 |
tIPv6FilterDefaultActionThe value of the object tIPv6FilterDefaultAction specifies
the action to be taken for packets that do not match any
of the filter entries.
The only allowed values for this field are drop(1) and forward(2).rw TFilterAction .1.3.6.1.4.1.6527.3.1.2.21.18.1.5 |
tIPv6FilterRadiusInsertPtThe value of tIPv6FilterRadiusInsertPt specifies at what place the
filter entries received from Radius will be inserted in the filter.
No regular entries, nor Credit Control provided entries can be
configured in this range.
The value 0 means that no Radius provided filter entries can be
inserted in the filter.
If tIPv6FilterRadiusInsertSize is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.18.1.6 |
tIPv6FilterRadiusInsertSizeThe value of tIPv6FilterRadiusInsertSize specifies how many
filter entries received from Radius for subscriber hosts
can be inserted in the filter.
If tIPv6FilterRadiusInsertPt is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.18.1.7 |
tIPv6FilterCreditCntrlInsertPtThe value of tIPv6FilterCreditCntrlInsertPt specifies at what place
the filter entries received from Credit Control for a
particular subscriber host will be inserted in the filter.
No regular entries, nor Radius provided entries can be
configured in this range.
The value 0 means that no Credit Control provided filter entries
can be inserted in the filter.
If tIPv6FilterCreditCntrlInsertSize is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.18.1.8 |
tIPv6FilterCreditCntrlInsertSizeThe value of tIPv6FilterCreditCntrlInsertSize specifies how many
filter entries received from Credit Control can be inserted in the
filter.
If tIPv6FilterCreditCntrlInsertPt is set to 0, then this object
will be put to 0 as well. Any change attempts will be
silently discarded in this case.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.18.1.9 |
tIPv6FilterSubInsertHighWmarkThe value of the object tIPv6FilterSubInsertHighWmark
specifies the utilization of the filter ranges for filter
entry insertion, at which a table full alarm will be raised
by the agent.
The value 0 indicates that no alarm will be generated.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.21.18.1.10 |
tIPv6FilterSubInsertLowWmarkThe value of the object tIPv6FilterSubInsertLowWmark
specifies the utilization of the filter ranges for filter
entry insertion, at which a table full alarm will be cleared
by the agent.rw Integer32 .1.3.6.1.4.1.6527.3.1.2.21.18.1.11 |
tIpv6FilterCreditCntrlNbrInsertdThe value of the object tIpv6FilterCreditCntrlNbrInsertd
indicates how many filter entries are currently inserted
in the filter on request the credit control application.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.18.1.12 |
tIpv6FilterRadiusNbrInsertdThe value of the object tIpv6FilterRadiusNbrInsertd
indicates how many filter entries are currently inserted
in the filter on request the RADIUS application.ro Unsigned32 .1.3.6.1.4.1.6527.3.1.2.21.18.1.13 |
tIpv6FilterNameThe value of tIpv6FilterName specifies the name to associate
with this filter.rw TLNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.18.1.14 |
tIPv6FilterParamsTableA table of all IPv6 filter match entries for all IPv6 filters. SEQUENCE OF TIPv6FilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.19 |
tIPv6FilterParamsEntryInformation about a particular IPv6 Filter entry.
Every IPv6 Filter can have zero or more IPv6 Filter match entries.
a filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile. TIPv6FilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.19.1 |
tIPv6FilterParamsIndexThis is the secondary index for the entry. Every IPv6 filter can have
multiple entries, therefore every IPv6 filter entry is identified by
the tIPv6FilterId and tIPv6FilterParamsIndex. TEntryId .1.3.6.1.4.1.6527.3.1.2.21.19.1.1 |
tIPv6FilterParamsRowStatusThis object allows entries to be created and deleted in the
tIPv6FilterParamsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.19.1.2 |
tIPv6FilterParamsLogIdThis object specifies the log to use for packets that match
this entry. The value zero indicates that logging is disabled.rw TFilterLogId .1.3.6.1.4.1.6527.3.1.2.21.19.1.3 |
tIPv6FilterParamsDescriptionUser-provided description for this filter entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.4 |
tIPv6FilterParamsActionThe action to take for packets that match this filter entry. The value
default(3) specifies this entry to inherit the behavior defined as the
default for the filter.
The value nat(5) is not supported.rw TFilterActionOrDefault .1.3.6.1.4.1.6527.3.1.2.21.19.1.5 |
tIPv6FilterParamsForwardNHThe ipv6-address of the nexthop to which the packet should be forwarded
if it hits this filter entry. The action of this entry should be
'forward' in such a case.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.6 |
tIPv6FilterParamsForwardNHIndirecttIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or
indirectly reachable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.19.1.7 |
tIPv6FilterParamsRemarkDSCPThe DSCP value that should be remarked in case a packet hits this
filter entry.rw TDSCPFilterActionValue (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.8 |
tIPv6FilterParamsRemarkDSCPMasktIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking
with the DSCP value.rw TDSCPFilterActionValue (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.9 |
tIPv6FilterParamsRemarkDot1ptIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be
remarked on the packet if it hits this filter entry.rw Dot1PPriority (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.10 |
tIPv6FilterParamsSourceIpAddrIPv6 address to match the source-ip of the packet.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.11 |
tIPv6FilterParamsSourceIpMaskThe IPv6 Mask value for this policy IPv6 Filter entry. The mask is
ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr.rw InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.21.19.1.12 |
tIPv6FilterParamsDestinationIpAddrIPv6 address to match the destination-ip of the packet.rw InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.13 |
tIPv6FilterParamsDestinationIpMaskThe IPv6 Mask value for this policy IPv6 Filter entry. The mask is
ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr.rw InetAddressPrefixLength .1.3.6.1.4.1.6527.3.1.2.21.19.1.14 |
tIPv6FilterParamsNextHeaderIPv6 next header to match. set to -1 to disable matching IPv6 next
header. If the next header is changed the next header specific parameters
are reset. For instance if next header is changed from TCP to UDP, then the
objects tIPv6FilterParamsTcpSyn and tIPv6FilterParamsTcpAck will be turned off.
Because the match criteria only pertains to the last next-header, the
following values are not accepted: 0, 43, 44, 50, 51, and 60.rw TIpProtocol (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.15 |
tIPv6FilterParamsSourcePortValue1TCP/UDP port value1. The value of this object is used as per the
description for tIPv6FilterParamsSourcePortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.16 |
tIPv6FilterParamsSourcePortValue2TCP/UDP port value2. The value of this object is used as per the
description for tIPv6FilterParamsSourcePortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.17 |
tIPv6FilterParamsSourcePortOperatorThe operator specifies the manner in which
tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2
are to be used.rw TTcpUdpPortOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.18 |
tIPv6FilterParamsDestPortValue1TCP/UDP port value1. The value of this object is used as per the
description for tIPv6FilterParamsDestPortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.19 |
tIPv6FilterParamsDestPortValue2TCP/UDP port value2. The value of this object is used as per the
description for tIPv6FilterParamsDestPortOperator.rw TTcpUdpPort (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.20 |
tIPv6FilterParamsDestPortOperatorThe operator specifies the manner in which tIPFilterParamsDestPortValue1
and tIPFilterParamsDestPortValue2 are to be used.rw TTcpUdpPortOperator (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.21 |
tIPv6FilterParamsDSCPDSCP to be matched on the packet.rw TDSCPNameOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.22 |
tIPv6FilterParamsTcpSynIf Enabled, matches a TCP Syn as per value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.19.1.23 |
tIPv6FilterParamsTcpAckIf Enabled, matches a TCP Ack as per value of the object.rw TItemMatch .1.3.6.1.4.1.6527.3.1.2.21.19.1.24 |
tIPv6FilterParamsIcmpCodeIcmp code to be matched. tIPv6FilterParamsIcmpCode complements the
object tIPv6FilterParamsIcmpType. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp code matching is not
enabled.rw INTEGER (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.21.19.1.25 |
tIPv6FilterParamsIcmpTypeIcmp type to be matched. tIPv6FilterParamsIcmpType complements the
object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually
enable ICMP matching. The value -1 means Icmp type matching is not
enabled.rw INTEGER (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.21.19.1.26 |
tIPv6FilterParamsCflowdSampleWhen tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling
and analysis is performed on those packet streams where this filter
has been applied. Only packets matching this IPv6 filter entry are
subjected to Cflowd sampling and analysis. A Cflowd profile controls
the sampling and analysis of data flows through the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.19.1.27 |
tIPv6FilterParamsCflowdIfSampleWhen tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd
sampling and analysis is performed on those packet streams where this
filter has been applied. Only packets matching this IPv6 filter entry
are subjected to Cflowd sampling and analysis. A Cflowd profile
controls the sampling and analysis of data flows through the router.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.19.1.28 |
tIPv6FilterParamsForwardNHInterfaceThe interface name for the nexthop to which the packet should be
forwarded if it hits this filter entry. The action of this entry
should be 'forward' in such a case.rw DisplayString .1.3.6.1.4.1.6527.3.1.2.21.19.1.29 |
tIPv6FilterParamsIngressHitCountThis object indicates the number of times an ingress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.19.1.30 |
tIPv6FilterParamsEgressHitCountThis object indicates the number of times an egress packet
matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.19.1.31 |
tIPv6FilterParamsLogInstantiatedtIPv6FilterParamsLogInstantiated indicates if the filter log for
this filter entry has been instantiated or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.19.1.32 |
tIPv6FilterParamsForwardRedPlcytIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be
used to determine the nexthop.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.33 |
tIPv6FilterParamsActiveDesttIPv6FilterParamsActiveDest indicates the IPv6 address of the active
destination for this IPv6 filter. A value of 0 indicates that there
is currently no active destination.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.34 |
tIPv6FilterParamsTimeRangeNametIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be
associated with this filter entry.
A value for this object can only be specified during row creation, and
cannot be altered lateron.
Also, a value is accepted only if the tmnxTimeRangeEntry is defined in
the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.rw TNamedItemOrEmpty (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.35 |
tIPv6FilterParamsTimeRangeStatetIPv6FilterParamsTimeRangeState indicates whether or not the entry
is currently in effect.
- timeRangeNotApplic:
no time range is applicable for this entry.
- timeRangeNotActive:
A time range is defined in tIPv6FilterParamsTimeRangeName, but is not
active at this moment. Consequently the filter entry is not
installed.
- timeRangeActive.
A time range is defined in tIPv6FilterParamsTimeRangeName, and is
activated successfully.
- timeRangeActiveDownloadFailed:
A time range is defined in tIPv6FilterParamsTimeRangeName, and is
activated, but the corresponding filter entry could not be
installed due to resource problems.ro TTimeRangeState .1.3.6.1.4.1.6527.3.1.2.21.19.1.36 |
tIPv6FilterParamsIngrHitByteCountThe value of tIPv6FilterParamsIngrHitByteCount indicates the number
of bytes of all ingress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.19.1.37 |
tIPv6FilterParamsEgrHitByteCountThis tIPv6FilterParamsEgrHitByteCount indicates the number
of bytes of all egress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.19.1.38 |
tIPv6FilterParamsFwdSvcIdtIPv6FilterParamsFwdSvcId indicates the service id of the
destination for this filter entry. The value 0 indicates that
there is no active SAP or SDP destination.ro TmnxServId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.39 |
tIPv6FilterParamsFwdSapPortIdtIPv6FilterParamsFwdSapPortId specifies the sap port id of the
destination for this filter entry.
The value 0 indicates that there is no SAP destination
defined. A value different from 0 can only be specified if the value
of the tIPv6FilterParamsAction object of this entry is 'forward'.
In addition a non-zero value can only be given if the object
tIPv6FilterParamsFwdSdpBind is '0'.rw TmnxPortID (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.40 |
tIPv6FilterParamsFwdSapEncapValtIPv6FilterParamsFwdSapEncapVal specifies the sap port encap value
of the destination SAP for this filter entry.
A value different from 0 can only be specified if the value of the
tIPv6FilterParamsAction object of this entry is 'forward'. In addition
a non-zero value can only be given if the object
tIPv6FilterParamsFwdSdpBind has value '0'. The value 0 indicates
that either
1) the sap encapsulation value is not specified when
tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSvcId
have valid values; or
2) that there is no SAP destination.rw TmnxEncapVal (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.41 |
tIPv6FilterParamsFwdSdpBindtIPv6FilterParamsFwdSdpBind specifies the sdp bind id of the
destination for this filter entry.
The value '0' indicates that there is currently no SDP binding defined.
A value different from '0' can only be specified if the value of the
tIPv6FilterParamsAction object of this entry is 'forward'. In addition
a non-zero value can only be given if the objects
tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSapEncapVal have
value 0.rw SdpBindId (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.19.1.42 |
tFilterGroupInsertedEntries OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.20 |
tFltrGrpInsrtdEntriesFilterTypetFltrGrpInsrtdEntriesFilterType specifies the type of the filter
referred to by tFltrGrpInsrtdEntriesFilterId.
Inserted entries can only occur in 'fltrtypeselIp' and 'fltrtypeselIpv6'rw TFilterType .1.3.6.1.4.1.6527.3.1.2.21.20.1 |
tFltrGrpInsrtdEntriesFilterIdtFltrGrpInsrtdEntriesFilterId specifies for which filter the inserted
entries must be grouped.rw TFilterID .1.3.6.1.4.1.6527.3.1.2.21.20.2 |
tFltrGrpInsrtdEntriesApplicationtFltrGrpInsrtdEntriesApplication specifies for which application the
the inserted entries must be grouped.rw TFilterSubInsSpaceOwner .1.3.6.1.4.1.6527.3.1.2.21.20.3 |
tFltrGrpInsrtdEntriesLocationtFltrGrpInsrtdEntriesLocation specifies at what location the inserted
entries must be grouped.rw Enumeration .1.3.6.1.4.1.6527.3.1.2.21.20.4 |
tFltrGrpInsrtdEntriesResulttFltrGrpInsrtdEntriesResult indicates the success or failure of the
last requested grouping request on inserted entries.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.21.20.5 |
tFltrGrpInsrtdEntriesFeedbacktFltrGrpInsrtdEntriesFeedback may indicate additional info on the last
inserted filter entries grouping action performed.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.20.6 |
tFltrGrpInsrtdEntriesExecuteSetting the object tFltrGrpInsrtdEntriesExecute to 'true' will cause
the system to attempt to execute te grouping command as specified
by the other MIB objects in the tFilterGroupInsertedEntries mibgroup.
When read the value will always indicate 'false'. The result of the
command can be found in tFltrGrpInsrtdEntriesResult and
tFltrGrpInsrtdEntriesFeedbackrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.20.7 |
tDhcpFilterTableLastChangedThe value of tDhcpFilterTableLastChanged indicates the sysUpTime
at the time of the last modification to tDhcpFilterTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.21 |
tDhcpFilterTableContains a list of all DHCP filters configured on this system. SEQUENCE OF TDhcpFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.22 |
tDhcpFilterEntryInformation about a particular DHCP filter. Entries are created/deleted
by user. Entries have a presumed StorageType of nonVolatile. TDhcpFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.22.1 |
tDhcpFilterIdUniquely identifies a mac filter as configures on this system. TDHCPFilterID .1.3.6.1.4.1.6527.3.1.2.21.22.1.1 |
tDhcpFilterRowStatusThis object allows entries to be created and deleted in the
tDhcpFilterTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.22.1.2 |
tDhcpFilterLastChangedThe value of tDhcpFilterLastChanged indicates the timestamp of
last change to this row in tDhcpFilterTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.22.1.3 |
tDhcpFilterDescriptionUser-provided description for this filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.22.1.4 |
tDhcpFilterParamsTblLastChangedThe value of tDhcpFilterParamsTblLastChanged indicates the sysUpTime
at the time of the last modification to tDhcpFilterParamsTable by
adding, deleting an entry or change to a writable object in the table.
If no changes were made to the table since the last re-initialization
of the local network management subsystem, then this object contains a
zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.23 |
tDhcpFilterParamsTableA table of all DHCP filter match entries for all DHCP filters. SEQUENCE OF TDhcpFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.24 |
tDhcpFilterParamsEntryInformation about a particular DHCP filter entry.
Every DHCP filter can have zero or more DHCP filter match entries.
A filter entry with no match criteria set will match every
packet, and the entry action will be taken.
Entries are created/deleted by user.
There is no StorageType object, entries have a presumed
StorageType of nonVolatile. TDhcpFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.24.1 |
tDhcpFilterParamsIdThis is the secondary index for the entry. Every DHCP filter can have
multiple entries, therefore every DHCP filter entry is identified by
the tDhcpFilterId and tDhcpFilterParamsId. TEntryId .1.3.6.1.4.1.6527.3.1.2.21.24.1.1 |
tDhcpFilterParamsRowStatusThis object allows entries to be created and deleted in the
tDhcpFilterParamsTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.24.1.2 |
tDhcpFilterParamsLastChangedThe value of tDhcpFilterParamsLastChanged indicates the timestamp of
last change to this row in tDhcpFilterParamsTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.24.1.3 |
tDhcpFilterParamsOptionNumberThe value of tDhcpFilterParamsOptionNumber specifies the number of
the DHCP option to filter on.rw INTEGER (-1|0..255) .1.3.6.1.4.1.6527.3.1.2.21.24.1.4 |
tDhcpFilterParamsOptionMatchThe value of tDhcpFilterParamsOptionMatch specifies the criteria that
the DHCP option must match to trigger this filter entry.
The value present(1) specifies that the DHCP option must be present,
the value absent(2) specifies that the DHCP option must be absent. In
these cases tDhcpFilterParamsOptionValue will be reset to an empty
string.
A value string(3), string-exact(4), string-invert(5),
string-exact-invert(6), hex(7), hex-exact(8), hex-invert(9) or
hex-exact-invert(10) requires an octet string to be present in
tDhcpFilterParamsOptionValue to match against.rw TDhcpFilterMatch .1.3.6.1.4.1.6527.3.1.2.21.24.1.5 |
tDhcpFilterParamsActionThe action to take for DHCP host creation requests that match this filter entry.
The value none(1) specifies normal host creation behaviour, the value
bypass-host-creation(2) specifies to bypass host creation, the value
drop(3) specifies to drop the DHCP message.rw TDhcpFilterAction .1.3.6.1.4.1.6527.3.1.2.21.24.1.6 |
tDhcpFilterParamsOptionValueThe value of the object tDhcpFilterParamsOptionValue specifies
the matching pattern for the filtered DHCP option.
This object is mandatory at creation time. A zero length value is only
allowed when the value of tDhcpFilterParamsOptionMatch is present(1)
or absent(2).rw OCTET STRING .1.3.6.1.4.1.6527.3.1.2.21.24.1.7 |
tMacFilterNameTableLastChgdThe value of tMacFilterNameTableLastChgd indicates the
sysUpTime at the time of the last modification
of tMacFilterNameTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.25 |
tMacFilterNameTableA table that contains MAC filter name information. Entries
are created automatically by the system
when tMacFilterName object is set for the MAC filter. SEQUENCE OF TMacFilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.26 |
tMacFilterNameEntryBasic information about a specific MAC filter name. TMacFilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.26.1 |
tMacFilterNameIdThe value of the object tMacFilterNameId specifies the filter
name associated with this MAC filter.ro TAnyFilterID .1.3.6.1.4.1.6527.3.1.2.21.26.1.1 |
tMacFilterNameRowStatusThis value of the object tMacFilterNameRowStatus specifies the
status of this row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.26.1.2 |
tMacFilterNameLastChangedThe value of tMacFilterNameLastChanged indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.26.1.3 |
tIpFilterNameTableLastChgdThe value of tIpFilterNameTableLastChgd indicates the
sysUpTime at the time of the last modification
of tIpFilterNameTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.27 |
tIpFilterNameTableA table that contains IP filter name information. Entries
are created automatically by the system
when tIpFilterName object is set for the IP filter. SEQUENCE OF TIpFilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.28 |
tIpFilterNameEntryBasic information about a specific IP filter name. TIpFilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.28.1 |
tIpFilterNameIdThe value of the object tIpFilterNameId specifies the filter
name associated with this IP filter.ro TAnyFilterID .1.3.6.1.4.1.6527.3.1.2.21.28.1.1 |
tIpFilterNameRowStatusThis value of the object tIpFilterNameRowStatus specifies the
status of this row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.28.1.2 |
tIpFilterNameLastChangedThe value of tIpFilterNameLastChanged indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.28.1.3 |
tIpv6FilterNameTableLastChgdThe value of tIpv6FilterNameTableLastChgd indicates the
sysUpTime at the time of the last modification
of tIpv6FilterNameTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.29 |
tIpv6FilterNameTableA table that contains IPv6 filter name information. Entries
are created automatically by the system
when tIpv6FilterName object is set for the IPv6 filter. SEQUENCE OF TIpv6FilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.30 |
tIpv6FilterNameEntryBasic information about a specific IPv6 filter name. TIpv6FilterNameEntry .1.3.6.1.4.1.6527.3.1.2.21.30.1 |
tIpv6FilterNameIdThe value of the object tIpv6FilterNameId specifies the filter
name associated with this IPv6 filter.ro TAnyFilterID .1.3.6.1.4.1.6527.3.1.2.21.30.1.1 |
tIpv6FilterNameRowStatusThis value of the object tIpv6FilterNameRowStatus specifies the
status of this row.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.30.1.2 |
tIpv6FilterNameLastChangedThe value of tIpv6FilterNameLastChanged indicates the sysUpTime at
the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management
subsystem, then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.30.1.3 |
tFilterLiObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.21.31 |
tLiReservedBlockTableLastChangedThe object tLiReservedBlockTableLastChanged indicates the
sysUpTime at the time of the last modification
of tLiReservedBlockTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.1 |
tLiReservedBlockTableThe table tLiReservedBlockTable describes LI reserved blocks.
In this release this table can have at most one entry. SEQUENCE OF TLiReservedBlockEntry .1.3.6.1.4.1.6527.3.1.2.21.31.2 |
tLiReservedBlockEntryInformation about an LI reserved block. This block can be associated
with one or more filters to reserve a number of entries in those
filters for LI. TLiReservedBlockEntry .1.3.6.1.4.1.6527.3.1.2.21.31.2.1 |
tLiReservedBlockNameThe object tLiReservedBlockName uniquely identifies
an LI reserved block. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.1 |
tLiReservedBlockRowStatusThe object tLiReservedBlockRowStatus specifies the
status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.2 |
tLiReservedBlockLastChangedThe object tLiReservedBlockLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.3 |
tLiReservedBlockDescriptionThe object tLiReservedBlockDescription specifies a description
for this LI reserved block.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.4 |
tLiReservedBlockStartThe object tLiReservedBlockStart specifies the starting entry of
the LI reserved block.
If set to '0' no block is reserved. In this case the value of the
object tLiReservedBlockSize will be set to '0' by the system.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.5 |
tLiReservedBlockSizeThe object tLiReservedBlockSize specifies the size of the
LI reserved block.
If set to '0' no block is reserved. In this case the value of the
object tLiReservedBlockStart will be set to '0' by the system.rw TEntryIdOrZero .1.3.6.1.4.1.6527.3.1.2.21.31.2.1.6 |
tLiReservedBlockFltrTableLastChgThe value of tLiReservedBlockFltrTableLastChg indicates the
sysUpTime at the time of the last modification
of tLiReservedBlockFltrTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.3 |
tLiReservedBlockFltrTableThe table tLiReservedBlockFltrTable contains associations between
normal filters and LI block reservations. SEQUENCE OF TLiReservedBlockFltrEntry .1.3.6.1.4.1.6527.3.1.2.21.31.4 |
tLiReservedBlockFltrEntryAn association of a normal filter with an LI block reservation.
In this release, only MAC filters are supported. TLiReservedBlockFltrEntry .1.3.6.1.4.1.6527.3.1.2.21.31.4.1 |
tLiReservedBlockFltrTypeThe object tLiReservedBlockFltrType specifies the type of filter
this LI block reservation applies to.
In this release only MAC filters are supported. TFilterType .1.3.6.1.4.1.6527.3.1.2.21.31.4.1.1 |
tLiReservedBlockFltrIdStartThe object tLiReservedBlockFltrIdStart specifies the ID of the
first filter to apply an LI block reservation.
In this release, tLiReservedBlockFltrIdStart must be equal to
tLiReservedBlockFltrIdEnd. TFilterID .1.3.6.1.4.1.6527.3.1.2.21.31.4.1.2 |
tLiReservedBlockFltrIdEndThe object tLiReservedBlockFltrIdEnd specifies the ID of the
last filter to apply an LI block reservation.
In this release, tLiReservedBlockFltrIdEnd must be equal to
tLiReservedBlockFltrIdStart. TFilterID .1.3.6.1.4.1.6527.3.1.2.21.31.4.1.3 |
tLiReservedBlockFltrRowStatusThe object tLiReservedBlockFltrRowStatus specifies the
status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.4.1.4 |
tLiReservedBlockFltrLastChangedThe object tLiReservedBlockFltrLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.4.1.5 |
tLiFilterTableLastChangedThe object tLiFilterTableLastChanged indicates the
sysUpTime at the time of the last modification
of tLiFilterTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.5 |
tLiFilterTableThe table tLiFilterTable contains information about
all LI MAC filters. SEQUENCE OF TLiFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.31.6 |
tLiFilterEntryAn LI MAC filter. TLiFilterEntry .1.3.6.1.4.1.6527.3.1.2.21.31.6.1 |
tLiFilterTypeThe object tLiFilterType specifies the type of this LI filter.
In this release only MAC filters are supported. TFilterType .1.3.6.1.4.1.6527.3.1.2.21.31.6.1.1 |
tLiFilterNameThe object tLiFilterName indicates the unique name of this
LI MAC Filter. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.6.1.2 |
tLiFilterRowStatusThe object tLiFilterRowStatus specifies the status of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.6.1.3 |
tLiFilterLastChangedThe object tLiFilterLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.6.1.4 |
tLiFilterDescriptionThe object tLiFilterDescription specifies a description for this
LI MAC filter.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.6.1.5 |
tLiFilterAssociationTableLastChgThe object tLiFilterAssociationTableLastChg indicates the
sysUpTime at the time of the last modification
of tLiFilterTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.7 |
tLiFilterAssociationTableThe table tLiFilterAssociationTable contains information about
the associations between LI filters and normal filters. SEQUENCE OF TLiFilterAssociationEntry .1.3.6.1.4.1.6527.3.1.2.21.31.8 |
tLiFilterAssociationEntryAn association between an LI filter and a normal filter. TLiFilterAssociationEntry .1.3.6.1.4.1.6527.3.1.2.21.31.8.1 |
tLiFilterAssociationFltrIdThe object tLiFilterAssociationFltrId indicates the id of the normal
filter in the association described by this entry. TFilterID .1.3.6.1.4.1.6527.3.1.2.21.31.8.1.1 |
tLiFilterAssociationRowStatusThe object tLiFilterAssociationRowStatus specifies the status of
this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.8.1.2 |
tLiFilterAssociationLastChgThe object tLiFilterAssociationLastChg indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.8.1.3 |
tLiMacFilterParamsTableLastChgThe object tLiMacFilterParamsTableLastChg indicates the
sysUpTime at the time of the last modification
of tLiMacFilterParamsTable.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.9 |
tLiMacFilterParamsTableThe table tLiMacFilterParamsTable contains all
LI MAC filter match entries for all LI MAC filters. SEQUENCE OF TLiMacFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.31.10 |
tLiMacFilterParamsEntryAn LI MAC filter match entry. TLiMacFilterParamsEntry .1.3.6.1.4.1.6527.3.1.2.21.31.10.1 |
tLiMacFilterParamsIdThe object tLiMacFilterParamsId indicates the secondary index for
this entry. Every LI MAC filter may have multiple match entries,
therefore every LI MAC filter match entry is identified by
the tLiFilterName and tLiMacFilterParamsId. TEntryId .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.1 |
tLiMacFilterParamsRowStatusThe object tLiMacFilterParamsRowStatus specifies the status
of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.2 |
tLiMacFilterParamsLastChangedThe object tLiMacFilterParamsLastChanged indicates the
sysUpTime at the time of the last modification of this entry.
If no changes were made to the entry since the last
re-initialization of the local network management subsystem,
then this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.3 |
tLiMacFilterParamsDescriptionThe object tLiMacFilterParamsDescription specifies a description
for this entry.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.4 |
tLiMacFilterParamsFrameTypeThe object tLiMacFilterParamsFrameType specifies the type of
mac frame for which we are defining this match criterium.rw TFrameType (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.5 |
tLiMacFilterParamsSrcMACThe object tLiMacFilterParamsSrcMAC specifies the source MAC
address to match for this LI MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.6 |
tLiMacFilterParamsSrcMACMaskThe object tLiMacFilterParamsSrcMACMask specifies
the source MAC mask value for this LI MAC filter match entry.
The mask is ANDed with the MAC to match tLiMacFilterParamsSrcMAC.
A zero bit means ignore this bit, do not match. A one bit means
match this bit with tLiMacFilterParamsSrcMAC.
Use the value 00-00-00-00-00-00 to disable this filter criterium.
If set to all zero, the value of tLiMacFilterParamsSrcMAC will
bet set to all zero by the system, and any attept to change this
value will be ignored.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.7 |
tLiMacFilterParamsDstMACThe object tLiMacFilterParamsDstMAC specifies the destination MAC
to match for this LI MAC filter entry.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.8 |
tLiMacFilterParamsDstMACMaskThe object tLiMacFilterParamsDstMACMask specifies the
destination MAC mask value for this LI MAC filter match entry.
The mask is ANDed with the MAC to match tLiMacFilterParamsDstMAC.
A zero bit means ignore this bit, do not match. a one bit means
match this bit with tLiMacFilterParamsDstMAC.
Use the value 00-00-00-00-00-00 to disable this filter criteria.
If set to all zero, the value of tLiMacFilterParamsDstMAC will
bet set to all zero by the system, and any attept to change this
value will be ignored.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.9 |
tLiMacFilterParamsIngrHitCountThe object tLiMacFilterParamsIngrHitCount indicates the number of
times an ingress packet matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.10 |
tLiMacFilterParamsEgrHitCountThis object tLiMacFilterParamsEgrHitCount indicates the number of
times an egress packet matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.11 |
tLiMacFilterParamsIngrHitBytesThe value of tLiMacFilterParamsIngrHitBytes indicates the number
of bytes of all ingress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.12 |
tLiMacFilterParamsEgrHitBytesThe value of tLiMacFilterParamsEgrHitBytes indicates the number
of bytes of all egress packets that matched this entry.ro Counter64 .1.3.6.1.4.1.6527.3.1.2.21.31.10.1.13 |
tFilterPrefixListTableLstChngThe object tFilterPrefixListTableLstChng indicates the
sysUpTime at the time of the last modification
of tFilterPrefixListTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
this object contains the value zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.32 |
tFilterPrefixListTableThe table tFilterPrefixListTable contains an entry
for each prefix list defined in the filter area. SEQUENCE OF TFilterPrefixListEntry .1.3.6.1.4.1.6527.3.1.2.21.33 |
tFilterPrefixListEntryAn entry in the tFilterPrefixListTable. TFilterPrefixListEntry .1.3.6.1.4.1.6527.3.1.2.21.33.1 |
tFilterPrefixListTypeThe object TFltrPrefixListType specifies the type
of prefix list for the prefix list tFilterPrefixListName. TFltrPrefixListType .1.3.6.1.4.1.6527.3.1.2.21.33.1.1 |
tFilterPrefixListNameThe object tFilterPrefixListName specifies the name
given to this prefix list. TNamedItem (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.33.1.2 |
tFilterPrefixListRowStatusThe object tFilterPrefixListRowStatus specifies the status
of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.33.1.3 |
tFilterPrefixListLastChangedThe object tFilterPrefixListLastChanged indicates the
sysUpTime at the time of the last modification of this row.
If no changes were made to the row since the last
re-initialization of the local network management subsystem,
then this object contains the value zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.33.1.4 |
tFilterPrefixListDescriptionThe object tFilterPrefixListDescription specifies a description
for this row.rw TItemDescription (TIMETRA-TC-MIB) .1.3.6.1.4.1.6527.3.1.2.21.33.1.5 |
tFilterPrefixListEntryTblLstChgThe object tFilterPrefixListEntryTblLstChg indicates the
sysUpTime at the time of the last modification
of tFilterPrefixListEntryTable.
If no changes were made to the table since the last
re-initialization of the local network management subsystem,
this object contains the value zero.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.34 |
tFilterPrefixListEntryTableThe table tFilterPrefixListEntryTable contains an entry
for each prefix defined in any prefix list
defined in the filter area. SEQUENCE OF TFilterPrefixListEntryEntry .1.3.6.1.4.1.6527.3.1.2.21.35 |
tFilterPrefixListEntryEntryAn entry in the tFilterPrefixListEntryTable. TFilterPrefixListEntryEntry .1.3.6.1.4.1.6527.3.1.2.21.35.1 |
tFilterPrefixListEntryPrefixTypeThe object tFilterPrefixListEntryPrefixType specifies whether the
prefix specified in tFilterPrefixListEntryPrefix is an IPv4 or IPv6
prefix.
The value of tFilterPrefixListEntryPrefixType must match the value
of the object tFilterPrefixListType. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.35.1.1 |
tFilterPrefixListEntryPrefixThe value of tFilterPrefixListEntryPrefix specifies
the IP prefix of this prefix list entry. InetAddress .1.3.6.1.4.1.6527.3.1.2.21.35.1.2 |
tFilterPrefixListEntryPrefixLenThe value of tFilterPrefixListEntryPrefixLen specifiesd
the IP prefix length of this prefix list entry. InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.21.35.1.3 |
tFilterPrefixListEntryRowStatusThe object tFilterPrefixListEntryRowStatus specifies the status
of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6527.3.1.2.21.35.1.4 |
tFilterNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.21 |
tFilterNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.21.0 |
tIPFilterPBRPacketsDropThe tIPFilterPBRPacketsDrop event is generated either
when the configuration of a forwarding action refers to an
invalid/unconfigured next-hop or if the active interface goes down
operationally in the process of active filtering. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.1 |
tFilterEntryActivationFailedThe tFilterEntryActivationFailed event can only be
generated for entries that are controlled by a tmnxTimeRangeEntry.
If the tmnxTimeRangeEntry becomes active the indicated entry must be
installed.
The event is generated when this installation failed because
of resource problems. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.2 |
tFilterEntryActivationRestoredThe tFilterEntryActivationRestored event can only be
generated for entries that are controlled by a tmnxTimeRangeEntry.
If the tmnxTimeRangeEntry becomes active the indicated entry must be
installed.
The event tFilterEntryActivationFailed is generated when
this installation originally failed because of resources
problems,
The notification tFilterEntryActivationRestored is sent
when either the time range associated with the filter is no
longer active, or when the filter entry
was installed due to the availability of new resources. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.3 |
tFilterSubInsSpaceAlarmRaisedThe tFilterSubInsSpaceAlarmRaised notification is
generated when the utilization of a filter entry
range that was reserved for filter entry insertion
increases to the configured high watermark for his filter NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.4 |
tFilterSubInsSpaceAlarmClearedThe tFilterSubInsSpaceAlarmCleared notification is
generated when the utilization of a filter entry
range that was reserved for filter entry insertion
dropped below to the configured low watermark for his filter. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.5 |
tFilterSubInsFltrEntryDroppedThe tFilterSubInsFltrEntryDropped notification is
generated when a request to insert a filter entry
was not successful. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.6 |
tFilterBgpFlowSpecProblemThe tFilterBgpFlowSpecProblem notification is
generated when a BGP flowspec NLRI is received in
the filter module that cannot be treated - i.e. for
which no filter entry is installed in the system,
or when there is a problem inserting (new) or
reshuffling (existing) flowspec or merged filter entries. NOTIFICATION-TYPE .1.3.6.1.4.1.6527.3.1.3.21.0.7 |