TIMETRA-APS-MIB
AI MIB Summary
The TIMETRA-APS-MIB manages and provisions Automatic Protection Switching (APS) states, protection group configurations, and switchover events on Alcatel-Lucent (now Nokia) SR OS routers by extending the standard RFC 3498 APS MIB. It enables monitoring of link redundancy status, active/standby interface states, and manual or automatic protection switching triggers to ensure service continuity on carrier-grade transport networks.
This document is the SNMP MIB module to manage and provision APS functionality for the Alcatel-Lucent SROS products. This includes extensions to the APS MIB defined in RFC 3498.
Copyright 2004-2011 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions.
Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Main OID:
timetraAPSMIBModule.1.3.6.1.4.1.6527.1.1.3.29
23
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
timetraAPSMIBModuleThis document is the SNMP MIB module to manage and provision APS
functionality for the Alcatel-Lucent SROS products. This includes
extensions to the APS MIB defined in RFC 3498.
Copyright 2004-2011 Alcatel-Lucent. All rights reserved.
Reproduction of this document is authorized on the condition that
the foregoing copyright notice is included.
This SNMP MIB module (Specification) embodies Alcatel-Lucent's
proprietary intellectual property. Alcatel-Lucent retains
all title and ownership in the Specification, including any
revisions.
Alcatel-Lucent grants all interested parties a non-exclusive
license to use and distribute an unmodified copy of this
Specification in connection with management of Alcatel-Lucent
products, and without fee, provided this copyright notice and
license appear on all copies.
This Specification is supplied 'as is', and Alcatel-Lucent
makes no warranty, either express or implied, as to the use,
operation, condition, or performance of the Specification. MODULE-IDENTITY .1.3.6.1.4.1.6527.1.1.3.29 |
tApsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.1.29 |
tApsProtectionTypeThe value of tApsProtectionType specifies the protection type of the
APS group.
The valid options are:
onePlusOneSignalling (1)
onePlusOne (2)
DEFVAL { onePlusOneSignalling }
::= { tApsConfigEntry 1 }
tApsLineSFHoldTime OBJECT-TYPE
SYNTAX Unsigned32 (0..100)
UNITSrw Enumeration .1.3.6.1.4.1.6527.3.1.1.29.2.9 |
tApsMIBObjs OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.2.29 |
tApsCommandTableThis table augments the apsCommandTable of the APS-MIB SEQUENCE OF TApsCommandEntry .1.3.6.1.4.1.6527.3.1.2.29.1 |
tApsCommandEntryA conceptual row in the tApsCommandTable. This row exists only
if the associated apsConfigEntry is active. TApsCommandEntry .1.3.6.1.4.1.6527.3.1.2.29.1.1 |
tApsExerciseCommandResultStores the result of the last exercise command on the
APS group and channel specified by the index values.
When read this object returns 4(unknown) if no exercise command
has been written to this channel since initialization.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.29.1.1.1 |
tApsChanStatusTableThis table augments the apsChanConfigTable of the APS-MIB. It contains
status information in addition to those mentioned in apsChanStatusTable
of the APS MIB. SEQUENCE OF TApsChanStatusEntry .1.3.6.1.4.1.6527.3.1.2.29.2 |
tApsChanStatusEntryA conceptual row in the tApsChanStatusTable. This row exists only
if the associated apsChanConfigEntry exists. TApsChanStatusEntry .1.3.6.1.4.1.6527.3.1.2.29.2.1 |
tApsChanTxLaisStateThe current state of the 7x50 APS forced Tx-LAIS on the specified
APS channel.
Note that the 7x50 products always receive and transmit on the same
(active) APS channel. For a Multi-Chassis (MC) APS or a unidirectional
APS group, the 7x50 product may transmit (Tx) L-AIS on the inactive
APS channel to force the remote end to receive traffic on the 7x50
selected active APS channel.
The state clear indicates that the 7x50 product currently doesn't
transmit any forced LAIS on the APS channel. The state momentary
indicates that the 7x50 product has transmitted forced LAIS on the APS
channel for a moment(e.g. 100 msec). The state persistent indicates
that the 7x50 product has been persistently transmitting forced LAIS on
the APS channel.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.29.2.1.1 |
tApsMcConfigTableThis table augments the apsConfigTable of the APS-MIB. SEQUENCE OF TApsMcConfigEntry .1.3.6.1.4.1.6527.3.1.2.29.3 |
tApsMcConfigEntryA conceptual row in the tApsMcConfigTable. This row exists only
if the associated apsConfigEntry is active. TApsMcConfigEntry .1.3.6.1.4.1.6527.3.1.2.29.3.1 |
tApsMcNeighborAddrTypeThe value of object tApsMcNeighborAddrType specifies the address type
of the neighbor's ip-address as specified by tApsMcNeighborAddr in
the case of Multi-Chassis APS architecture.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.6527.3.1.2.29.3.1.1 |
tApsMcNeighborAddrThe value of tApsMcNeighborAddr variable specifies the neighbor's
ip-address only on a Multi-Chassis APS where the working and protect
circuits are configured on different routers. The value of
tApsMcNeighborAddr set to 0.0.0.0, implies that this APS group
is configured as a Single-Chassis APS group.
The route to the neighbor must not traverse the MC-APS member
(working or protect) circuits. It is recommended that the address
configured here is on a shared network between the routers that own
the working and protect circuits. By default no neighbor address
is configured and both the working and protect circuits are to be
configured on the same router (i.e. Single-Chassis APS).rw InetAddress .1.3.6.1.4.1.6527.3.1.2.29.3.1.2 |
tApsMcAdvertiseIntervalThe value of tApsMcAdvertiseInterval specifies the time interval,
in 100s of milliseconds, between 'I am operational' messages sent by
both protect and working circuits to their neighbor for Multi-Chassis
APS. The value of tApsMcAdvertiseInterval is valid only for a
Multi-Chassis APS as indicated by the value of tApsMcNeighborAddr not
set to 0.0.0.0.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.29.3.1.3 |
tApsMcHoldTimeThe value of tApsMcHoldTime specifies how much time can pass, in 100s
of milliseconds, without receiving an advertise packet from the
neighbor before the Multi-Chassis signaling link is considered not
operational. It is usually 3 times the value of
tApsMcAdvertiseInterval. The value of tApsMcAdvertiseInterval is valid
only for a Multi-Chassis APS as indicated by the value of
tApsMcNeighborAddr not set to 0.0.0.0.rw Unsigned32 .1.3.6.1.4.1.6527.3.1.2.29.3.1.4 |
tApsMcStatusTabletApsMcStatusTable augments the apsConfigTable of the APS-MIB. It
contains status information in addition to those mentioned in
apsStatusTable of the APS MIB. SEQUENCE OF TApsMcStatusEntry .1.3.6.1.4.1.6527.3.1.2.29.4 |
tApsMcStatusEntryA conceptual row in the tApsMcStatusTable. This row exists only
if the associated apsConfigEntry exists. TApsMcStatusEntry .1.3.6.1.4.1.6527.3.1.2.29.4.1 |
tApsMcApsCtlLinkStateThe value of tApsMcApsCtlLinkState indicates the current state of
the 7x50 Multi-Chassis (MC) APS Group Control Link.
Note that for a Single-Chassis APS group the state is always up.
The state 'up' indicates that the 7x50 MC-APS controller has received a
valid control message from its neighboring router within the last
tApsMcHoldTime interval, and the MC-APS control link is considered as
operational.
The state 'dnSignalingFailure' indicates that the 7x50 MC-APS
controller hasn't received any control message from its neighboring
router or vice-versa within the last tApsMcHoldTime interval.The MC-APS
control link is considered as operationally down.
The state 'dnIncompatibleNbr' indicates that the 7x50 MC-APS controller
has received a control message from a neighboring router within the
last tApsMcHoldTime interval, but the member circuit type
(i.e. working/protection) of the neighboring router is not compatible
with that of the local router. The MC-APS control link is considered as
operationally down.ro Enumeration .1.3.6.1.4.1.6527.3.1.2.29.4.1.1 |
tApsConfigTabletApsConfigTable augments the apsConfigTable of the APS-MIB. It
contains configuration information in addition to those mentioned in
apsConfigTable of the APS MIB. SEQUENCE OF TApsConfigEntry .1.3.6.1.4.1.6527.3.1.2.29.5 |
tApsConfigEntryA conceptual row in the tApsConfigTable. This row exists only
if the associated apsConfigEntry exists. TApsConfigEntry .1.3.6.1.4.1.6527.3.1.2.29.5.1 |
tApsNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.29 |
tApsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6527.3.1.3.29.0 |