ADN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for ADN-MIB.
2703
Objects
Active
Status
14
Dependencies
Imported Objects
Objects
2703 total| Object Name |
|---|
alcatel OBJECT IDENTIFIER .1.3.6.1.4.1.637 |
RFC1213-MIB Unknown .1.3.6.1.4.1.637 |
adn OBJECT IDENTIFIER .1.3.6.1.4.1.637.3 |
adnMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1 |
adnVersion OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.1 |
adnTpxAgent OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.1.1 |
adnHssAgent OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.1.2 |
adnPsxAcxAgent OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.1.3 |
adnNmsVpnAgent OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.1.4 |
adnEquipment OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2 |
adnNode OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1 |
adnTp4900 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.1 |
adnTp8000 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.2 |
adnTp4800 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.3 |
adnTp3000 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.4 |
adnHSS OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.5 |
adnHSS400 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.5.1 |
adnHSS700 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.5.2 |
adnHSS1X OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.6 |
adnPsx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.7 |
adnAcx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.1.8 |
adnCard OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2 |
adnLpu OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.1 |
adnMsc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2 |
adnHbcp8 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.1 |
adnHb2t1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.2 |
adnHb2e1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.3 |
adnHb8ce OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.4 |
adnHb8ct OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.5 |
adnHb8cu OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.6 |
adnHb8t1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.7 |
adnHb8e1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.2.8 |
adnHsc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3 |
adnBbe3b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.1 |
adnBbe3b3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.1.1 |
adnBbt3b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.2 |
adnBbt3b3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.2.1 |
adnBbs1b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.3 |
adnBbs1b3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.3.1 |
adnBbe1b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.4 |
adnBbt1b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.5 |
adnBbs1b2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.6 |
adnBbs1b4 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.6.1 |
adnBbt3b2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.7 |
adnBbt3b4 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.7.1 |
adnHbcet OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.8 |
adnHbcee OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.9 |
adnHbceu OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.10 |
adnBbs4b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.11 |
adnBbs4b2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.12 |
adnBbts1c OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.13 |
adnBbtp3c OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.3.14 |
adnIwc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.4 |
adnHbcig1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.4.1 |
adnHbcigr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.4.2 |
adnHbcig3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.4.3 |
adnHbcig4 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.4.4 |
adnAse OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.5 |
adnBbase3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.5.1 |
adnBbaseb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.5.1.1 |
adnBbaseb1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.5.1.2 |
adnCu OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.6 |
adnNb41b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.6.1 |
adnNb51b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.6.2 |
adnHbsac OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.7 |
adn3rdParty OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8 |
adnCiscoIr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.1 |
adnHb2et OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.1.1 |
adnHb2tr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.1.2 |
adnTelogyVs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.2 |
adnHbvss8 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.2.1 |
adnHbvss16 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.8.2.2 |
adnPsxCard OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9 |
adnCs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.1 |
adnCbs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.2 |
adnUtr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.3 |
adnFtd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.4 |
adnCtuj OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.5 |
adnMc4 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.6 |
adnCbx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.7 |
adnDcFtd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.8 |
adnDclmg OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.9 |
adnCts OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.10 |
adnCmic OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.11 |
adnCtj64 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.12 |
adnAcTuj OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.13 |
adnDcv35 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.14 |
adnDcv11 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.15 |
adnAcj64 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.16 |
adnImc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.17 |
adnCts1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.18 |
adnCts2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.19 |
adnCtas OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.20 |
adnCts1b OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.9.21 |
adnAcxCard OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.10 |
adnPac OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.10.1 |
adnLac4 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.10.2 |
adnLac8 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.10.3 |
adnAcx8 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.10.4 |
adnSync OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.11 |
adnBbsyn OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.2.11.1 |
adnInterface OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.3 |
adnProcessor OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4 |
adnCUMain OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.1 |
adnOM OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.2 |
adnXP OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.3 |
adnET OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.4 |
adnAX OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.5 |
adnSE OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.6 |
adnSY OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.4.7 |
adnChassis OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.5 |
adnHSSChassis OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.5.5 |
adn3Coupler OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.5.5.1 |
adn8Coupler OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.5.5.2 |
adn12Coupler OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.5.5.3 |
adnAeiPort OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.6 |
adnIosPort OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.7 |
adnApplique OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.8 |
adn3rdPartyInterface OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.2.9 |
adnExperimental OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.3 |
adnExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4 |
adnInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.2 |
adnIfTableA list of interface entries. The number of
entries is given by the value of ifNumber. SEQUENCE OF AdnIfEntry .1.3.6.1.4.1.637.3.1.4.2.2 |
adnIfEntryAn interface entry containing objects at the
subnetwork layer and below for a particular
interface. AdnIfEntry .1.3.6.1.4.1.637.3.1.4.2.2.1 |
adnIfInstallStatusThe value of this object provides additional information
concerning the availability status of the interface. It is
a bitmap of installation status conditions. When the value
of this object is 0, none of the status conditions are
present.
1 - initialization incomplete
2 - last restart operator initiated
4 - reserved for testro INTEGER .1.3.6.1.4.1.637.3.1.4.2.2.1.1 |
adnIfControlStatusThis object provides a mechanism for controlling the status
of the interface. Its value is a bitmap of controls that
determine the value of ifAdminStatus. A value of 0
indicates that none of the status controls are in effect.
1 - reset
2 - reserve for test
4 - shutting downrw INTEGER .1.3.6.1.4.1.637.3.1.4.2.2.1.2 |
adnIfSubTypeThis object provides additional type information for
interfaces with an ifType of 'other' or 'proprietary
virtual'.
1 - No qualification
2 - other, FRANP (Frame Relay Alcatel Network Protocol)
3 - other, ISS (Internal Subscriber Service)
100 - proprietary virtual, FLIP
(Fake Line Interface Process)
101 - proprietary virtual, ATM internal line
102 - proprietary virtual, ATM logical line
(internode virtual path)
103 - proprietary virtual, frame relay logical line
(interworking virtual channel connection)
104 - proprietary virtual, IP over frame relay
logical line (interworking FR virtual connection)
105 - proprietary virtual, IP over ATM logical line
(interworking virtual channel connection)ro Enumeration .1.3.6.1.4.1.637.3.1.4.2.2.1.3 |
adnTransmission OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10 |
adnDs1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.18 |
adnDsx1ConfigTableThis table is the extension of the
dsx1ConfigTable described in the DS1/E1
standard MIB. SEQUENCE OF AdnDsx1ConfigEntry .1.3.6.1.4.1.637.3.1.4.10.18.1 |
adnDsx1ConfigEntryAn entry in the DS1
Configuration table extension. AdnDsx1ConfigEntry .1.3.6.1.4.1.637.3.1.4.10.18.1.1 |
adnDsx1LineTypeThe field is used to qualify the dsx1LineType.
noQual - No qualification.
e1Unframed - E1 with no framingrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.18.1.1.1 |
adnDsx1LineLengthThe length of the DS1 line in meters. This
object provides information for line build out
circuitry if it exists and can profitably use the
information. Accuracy should be within 30 meters.
For many short lines and for lines that cannot use
this information, the value zero is appropriate.
Line build out circuitry sets electrical power levels
in the transmitter, and sensitivity in the receiver.
The line length means the distance to the nearest
electrical regeneration point (which could be a simple
repeater, or a CSU or DACS/multiplexer, or even a
direct connection to another switch, etc.
There is a possibility of increased noise (or even
total signal loss) if the length is not set properly.ro INTEGER -- UNITS meters .1.3.6.1.4.1.637.3.1.4.10.18.1.1.2 |
adnDsx1LineStatusThis variable indicates the status
of the line interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnDsx1NoAlarm bit should be set
only if no other bit is set.
The bit positions and their corresponding
ATM core counter numbers # are:
# Bit Value
. 1 noAlarm
. No alarm present
21 2 HBERError
. High bit error rate (HBER)
23 4 RLBError
. Loopback requested by the remote equipment
30 8 LCMAError
. Loss of CRC multiframe alignment
Common Name: Line Statusro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.1.1.3 |
adnDsx1MsAisTestThis variable is used to send a constant alarm
indication signal (AIS) to the remote equipment.
This object is used only for testing and debugging.
This object is available for ATM T1/E1 only.
Common Name: Forcing a Line Alarm Indication Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.18.1.1.4 |
adnDsx1MsFerfTestThis variable is used to send a constant yellow
alarm signal at the frame level to the remote equipment.
This object is used only for testing and debugging.
This object is available for ATM T1/E1 only.
Common Name: Forcing a Line FERF Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.18.1.1.5 |
adnDsx1RemLoopbackTestThis variable is used to force a loopback of
the line of the remote equipmentrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.18.1.1.6 |
adnDsx1LineHWStatusThis variable indicates the hardware
status of a line.
The given status value corresponds to
the last test initiated by setting the
nominator ifTestType with adnIfTest-
TypeLineHW test identifier.
If the result of the test, given by the
nominator ifTestResult, is different
than 'success' or 'failed', the given
status value is not significant.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnDsx1LineHWNoDefect bit should
be set only if no other bit is set.
If the status is not significant, all
the bits are reset.
The bit positions are:
1 lineHWNoDefect
2 BGPHT chip failure
4 not used
8 CBD chip failure on line side
8 framer chip failure on the input side
16 framer chip failure on line sidero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.1.1.7 |
adnDsx1StatTypeThe field displays the standard used for computing
the statistics counters.
noStatistics : no statistics are available on the
ds1/E1 interface
ansi : ANSI T1.231 statistics are activated
itu : ITU G.826 statistics are activatedrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.18.1.1.8 |
adnDsx1LinePerfStatusThis variable indicates the performance status of the
interface. It is a bit map represented as a sum;
therefore, it can represent multiple status
simultaneously.
- The NoDefect bit should be set only if no other
bit is set.
- The UnavailablePeriod indicates that the
interface has entered an unavailable period.
- The CurrentCrossingThreshold bit indicates that
one of the current statistics counter has
reached its threshold.
- The DayIntervalCrossingThreshold bit indicates that
one of the Day Interval statistics counter has
reached its threshold.
The bit positions are:
1 noDefect
2 unavailablePeriod
4 currentCrossingThreshold
8 dayIntervalCrossingThresholdro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.1.1.9 |
adnDsx1CounterTableThe DS1/E1 ADN Counter table. SEQUENCE OF AdnDsx1CounterEntry .1.3.6.1.4.1.637.3.1.4.10.18.2 |
adnDsx1CounterEntryAn entry in the DS1/E1 ADN Counter table . AdnDsx1CounterEntry .1.3.6.1.4.1.637.3.1.4.10.18.2.1 |
adnDsx1LosCounterDuration of loss-of-signal (LOS).
Counter #0 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1 interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.1 |
adnDsx1AisCounterDuration of alarm indication signal
(AIS).
Counter #2 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1 interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.2 |
adnDsx1FerfCounterDuration of far end received failure
(FERF) received from the remote
equipment.
FERF is also called remote alarm
indication (RAI) or received yellow
alarm.
Counter #3 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1-Framed interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.3 |
adnDsx1FeCounterNumber of frame bit errors (FE).
Counter #5 of the ATM core, only
available on ATM-E1, CES-T1
and CES-E1-Framed interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.4 |
adnDsx1LofCounterDuration of loss-of-frame (LOF).
Counter #7 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1-Framed interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.5 |
adnDsx1FebeCounterNumber of far end block errors (FEBE).
Counter #9 of the ATM core, only
available on ATM-E1 and CES-E1-CRC
interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.6 |
adnDsx1PcvCounterPath Coding Violation (PCV) Error Event.
A Path Coding Violation error event is :
- a frame synchronization bit error in the T1-SF
and E1 no CRC formats,
- a CRC-6 error in the T1-ESF format,
- a CRC-4 error in the E1 CRC formats.
Counter #11 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1-CRC interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.7 |
adnDsx1Ts16AisCounterDuration of Alarm Indication Signal in
time slot 16 signalling channel (TS16AIS).
Counter #17 of the ATM core, only
available on CES-E1-Multiframed interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.8 |
adnDsx1RsaCounterDuration of Remote Signalling Multiframe Alarm (RSA).
Counter #18 of the ATM core, only
available on CES-E1-Multiframed interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.9 |
adnDsx1LsmaCounterDuration of Loss of Signalling Multiframe Alignment
(LSMA). Counter #19 of the ATM core, only
available on CES-E1-Multiframed interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.10 |
adnDsx1LcvCounterNumber of Line Code Violations (LCV).
Counter #21 of the ATM core, only
available on ATM-T1, ATM-E1, CES-T1
and CES-E1 interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.11 |
adnDsx1LcmaCounterDuration of Loss of CRC Multiframe Alignment
(LCMA). Counter #30 of the ATM core, only
available on CES-E1-CRC interfaces.ro Counter -- UNITS millisecond .1.3.6.1.4.1.637.3.1.4.10.18.2.1.12 |
adnDsx1SefCounterNumber of Severely Errored Frames (SEF).
Counter #30 of the ATM core, only
available on CES-T1 interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.13 |
adnDsx1ExzCounterNumber of excessive zeros (EXZ).
Counter #31 of the ATM core, only
available on ATM-T1 and CES-T1
interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.10.18.2.1.14 |
adnDsx1CurrentTableThe ADN DS1/E1 Current table.
This table is supported by CES-T1 interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1CurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.3 |
adnDsx1CurrentEntryAn entry in the ADN DS1/E1 Current table. AdnDsx1CurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.3.1 |
adnDsx1CurrentLSESsNumber of Severely errored seconds (SES-L) at line level
encountered during the current 15-minute interval.
Common Name: Severely Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.3.1.1 |
adnDsx1CurrentLLOSSsNumber of seconds containing one or more LOS defects
(LOSS-L) encountered during the current 15-minute
interval.
Common Name: LOS Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.3.1.2 |
adnDsx1CurrentAESsNumber of errored seconds of type A at path level
(ESA-P) encountered during the current 15-minute
interval.
Common Name: Errored Seconds of type Aro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.3.1.3 |
adnDsx1CurrentAISSsNumber of seconds containing one or more AIS defects
at path level (AISS-P) encountered during the
current 15-minute interval.
Common Name: AIS Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.3.1.4 |
adnDsx1IntervalTableThe ADN DS1/E1 Interval table.
This table is supported by CES-T1 interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1IntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.4 |
adnDsx1IntervalEntryAn entry in the ADN DS1/E1 Interval table. AdnDsx1IntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.4.1 |
adnDsx1IntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into 96
15-minute intervals. The interval identified by
1 is the most recently completed 15-minute interval,
and the interval identified by N is the interval
immediately preceding the one identified by N-1.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.4.1.1 |
adnDsx1IntervalLSESsNumber of Severely errored seconds (SES-L) at line level
encountered during a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.4.1.2 |
adnDsx1IntervalLLOSSsNumber of seconds containing one or more LOS defects
(LOSS-L) encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.4.1.3 |
adnDsx1IntervalAESsNumber of errored seconds of type A at path level
(ESA-P) encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.4.1.4 |
adnDsx1IntervalAISSsNumber of seconds containing one or more AIS defects
at path level (AISS-P) encountered during a particular
15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.4.1.5 |
adnDsx1DayIntervalTableThe ADN DS1/E1 Day Interval table.
This table is supported by CES-T1 interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1DayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.5 |
adnDsx1DayIntervalEntryAn entry in the ADN DS1/E1 Day Interval table. AdnDsx1DayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.5.1 |
adnDsx1DayIntervalESsThe number of Errored Seconds (ES) encountered by a
DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.1 |
adnDsx1DayIntervalSESsThe number of Severely Errored Seconds (SES) encoun-
tered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.2 |
adnDsx1DayIntervalSEFSsThe number of Severely Errored Framing Seconds (SEFS)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.3 |
adnDsx1DayIntervalUASsThe number of Unavailable Seconds (UAS) encountered
by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.4 |
adnDsx1DayIntervalCSSsThe number of Controlled Slip Seconds (CSS) encoun-
tered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.5 |
adnDsx1DayIntervalPCVsThe number of Path Coding Violations (PCV) encoun-
tered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.6 |
adnDsx1DayIntervalLESsThe number of Line Errored Seconds (LES) encountered
by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.7 |
adnDsx1DayIntervalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.8 |
adnDsx1DayIntervalLCVsThe number of Line Code Violations (LCVs) en-
countered by a DS1 interface in the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.9 |
adnDsx1DayIntervalLSESsNumber of Severely errored seconds (SES-L) at line level
encountered during the current day (from 0 hours to the
current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.10 |
adnDsx1DayIntervalLLOSSsNumber of seconds containing one or more LOS defects
(LOSS-L) encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.11 |
adnDsx1DayIntervalAESsNumber of errored seconds of type A at path level
(ESA-P) encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.12 |
adnDsx1DayIntervalAISSsNumber of seconds containing one or more AIS defects
at path level (AISS-P) encountered during the current
day (from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.5.1.13 |
adnDsx1FarEndCurrentTableThe ADN DS1/E1 Far End Current table.
This table is supported by CES-T1-ESF interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1FarEndCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.6 |
adnDsx1FarEndCurrentEntryAn entry in the ADN Far End DS1/E1 Current table. AdnDsx1FarEndCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.6.1 |
adnDsx1FarEndCurrentAESsNumber of errored seconds of type A at path level (ESA)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Errored Seconds of type Aro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.6.1.1 |
adnDsx1FarEndIntervalTableThe ADN DS1/E1 Far End Interval table.
This table is supported by CES-T1-ESF interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1FarEndIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.7 |
adnDsx1FarEndIntervalEntryAn entry in the ADN Far End DS1/E1 Interval table. AdnDsx1FarEndIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.7.1 |
adnDsx1FarEndIntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into 96
15-minute intervals. The interval identified by
1 is the most recently completed 15-minute interval,
and the interval identified by N is the interval
immediately preceding the one identified by N-1.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.7.1.1 |
adnDsx1FarEndIntervalAESsNumber of errored seconds of type A at path level (ESA)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Errored Seconds of type Aro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.7.1.2 |
adnDsx1FarEndDayIntervalTableThe ADN DS1/E1 Far End Day Interval table.
This table is supported by CES-T1-ESF interfaces.
This table refers to ANSI T1.231. SEQUENCE OF AdnDsx1FarEndDayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.8 |
adnDsx1FarEndDayIntervalEntryAn entry in the ADN Far End DS1/E1 Day Interval table. AdnDsx1FarEndDayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.8.1 |
adnDsx1FarEndDayIntervalESsThe number of Far End Errored Seconds (ES) encoun-
tered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.1 |
adnDsx1FarEndDayIntervalSESsThe number of Far End Severely Errored Seconds (SES)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.2 |
adnDsx1FarEndDayIntervalSEFSsThe number of Far End Severely Errored Framing
Seconds (SEFS) encountered by a DS1 interface in the
cuurent day (from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.3 |
adnDsx1FarEndDayIntervalUASsThe number of Far End Unavailable Seconds (UAS)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.4 |
adnDsx1FarEndDayIntervalCSSsThe number of Far End Controlled Slip Seconds (CSS)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.5 |
adnDsx1FarEndDayIntervalPCVsThe number of Far End Path Coding Violations (PCV)
reported via the far end block error count en-
countered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.6 |
adnDsx1FarEndDayIntervalLESsThe number of Far End Line Errored Seconds (LES) en-
countered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.7 |
adnDsx1FarEndDayIntervalBESsThe number of Bursty Errored Seconds (BESs)
encountered by a DS1 interface during the current day
(from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.8 |
adnDsx1FarEndDayIntervalAESsNumber of errored seconds of type A at path level (ESA)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.8.1.9 |
adnDsx1ItuCurrentTableThe ADN DS1/E1 Current Itu table.
This table is supported by CES-E1 interfaces.
This table refers to ITU G.826. SEQUENCE OF AdnDsx1ItuCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.9 |
adnDsx1ItuCurrentEntryAn entry in the ADN DS1/E1 Current Itu table. AdnDsx1ItuCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.18.9.1 |
adnDsx1ItuCurrentESsNumber of errored seconds (ES) encountered
during the current 15-minute interval.
Common Name: Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.1 |
adnDsx1ItuCurrentSESsNumber of severely errored seconds (SES)
encountered during the current 15-minute
interval.
Common Name: Severely Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.2 |
adnDsx1ItuCurrentBBEsNumber of background errored blocks (BBE)
encountered during the current 15-minute
interval.
Common Name: Background Errored Blocksro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.3 |
adnDsx1ItuFarEndCurrentESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
15-minute interval.
Common Name: Remote Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.4 |
adnDsx1ItuFarEndCurrentSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Remote Severely Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.5 |
adnDsx1ItuFarEndCurrentBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Remote Background Errored Blocksro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.6 |
adnDsx1ItuCurrentUASsThe number of unavailable seconds (UAS)
encountered during the current 15-minute
interval.
Common Name: Unavailable Timero Gauge .1.3.6.1.4.1.637.3.1.4.10.18.9.1.7 |
adnDsx1ItuIntervalTableThe ADN DS1/E1 Itu Interval table.
This table is supported by CES-E1 interfaces.
This table refers to ITU G.826. SEQUENCE OF AdnDsx1ItuIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.10 |
adnDsx1ItuIntervalEntryAn entry in the ADN DS1/E1 Interval Itu table. AdnDsx1ItuIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.10.1 |
adnDsx1ItuIntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into 96
15-minute intervals. The interval identified by
1 is the most recently completed 15-minute interval,
and the interval identified by N is the interval
immediately preceding the one identified by N-1.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.18.10.1.1 |
adnDsx1ItuIntervalESsNumber of errored seconds (ES) encountered
during a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.2 |
adnDsx1ItuIntervalSESsNumber of severely errored seconds (SES)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.3 |
adnDsx1ItuIntervalBBEsNumber of background errored blocks (BBE)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.4 |
adnDsx1ItuFarEndIntervalESsNumber of errored seconds (ES) encountered
by the remote equipment during a particular
15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.5 |
adnDsx1ItuFarEndIntervalSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.6 |
adnDsx1ItuFarEndIntervalBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.7 |
adnDsx1ItuIntervalUASsNumber of unavailable seconds (UAS)
encountered in a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.10.1.8 |
adnDsx1ItuDayIntervalTableThe ADN DS1/E1 Itu Day Interval table.
This table is supported by CES-E1 interfaces.
This table refers to ITU G.826. SEQUENCE OF AdnDsx1ItuDayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.11 |
adnDsx1ItuDayIntervalEntryAn entry in the DS1/E1 Day Itu table. AdnDsx1ItuDayIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.18.11.1 |
adnDsx1ItuDayIntervalESsNumber of errored seconds (ES) encountered
during the current day (from 0 hours to the
current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.1 |
adnDsx1ItuDayIntervalSESsNumber of severely errored seconds (SES)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.2 |
adnDsx1ItuDayIntervalBBEsNumber of background errored blocks (BBE)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.3 |
adnDsx1ItuFarEndDayIntervalESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
day (from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.4 |
adnDsx1ItuFarEndDayIntervalSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.5 |
adnDsx1ItuFarEndDayIntervalBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.6 |
adnDsx1ItuDayIntervalUASsNumber of unavailable seconds (UAS)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.18.11.1.7 |
adnDs3e3 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.30 |
adnX3ConfigTableThis table is the extension of the
dsx3ConfigTable described in the DS3/E3
standard MIB. SEQUENCE OF AdnX3ConfigEntry .1.3.6.1.4.1.637.3.1.4.10.30.1 |
adnX3ConfigEntryAn entry in the DS3/E3
Configuration table extension. AdnX3ConfigEntry .1.3.6.1.4.1.637.3.1.4.10.30.1.1 |
adnX3MsferfTestThis variable is used to send a constant yellow
alarm signal at the frame level to the remote equipment.
This object is used only for testing and debugging.
Common Name: Forcing a Line FERF Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.30.1.1.1 |
adnX3PathferfTestThis variable is used to send a constant yellow
alarm signal at the path level to the remote equipment.
This object is used only for testing and debugging.
Common Name: Forcing a Path FERF Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.30.1.1.2 |
adnX3AisTestThis variable is used to send a constant alarm
indication signal (AIS) to the remote equipment.
This object is used only for testing and debugging.
Common Name: Forcing a Line Alarm Indication Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.30.1.1.3 |
adnX3ScramblerconfigDefines if the DS3 Physical Layer Convergence Protocol
(PLCP) scrambler is active or not.
Common Name: D3 Scramblerrwobsolete Enumeration .1.3.6.1.4.1.637.3.1.4.10.30.1.1.4 |
adnX3IdleCellFillingconfigThe type of cell rate decoupling (CRD) mode
selected for the line:
- unassigned cells, according to ATM Forum
standard
- idle cells, according to ITU standart.
Common Name: Inserted Cell Typerwobsolete Enumeration .1.3.6.1.4.1.637.3.1.4.10.30.1.1.5 |
adnX3LineStatusThis variable indicates the status
of the line interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnX3NoAlarm bit should be set
only if no other bit is set.
The bit positions and their corresponding
ATM core counter numbers # are:
# Bit Value
. 1 adnX3NoAlarm
. No alarm present
10 2 adnX3RcvRAIFailure
. Receiving yellow/remote alarm (RAI)
. indication
. 4 adnX3reserved
. Not used
2 8 adndsx3RcvAIS
. Receiving alarm indication signals
. (AIS)
. 16 adnX3reserved
. Not used
7 32 adnX3LOF
. Receiving loss-of-frame (LOF)
. signals
0 64 adnX3LOS
. Receiving loss-of-signal (LOS)
. 128 adnX3LoopbackState
. Looping the received signal
. 256 adnX3reserved
. Not used
3 512 adnX3RcvFerfAlarm
. Receiving Far End Receive Failures
. (FERF) DS3 yellow alarm
4 1024 adnX3PbitError
. P-bit parity error counter threshold
. reached
5 2048 adnX3CbitError
. C-bit parity error counter threshold
. reached
6 4096 adnX3FEBEError
. Far end block errors (FEBE) counter
. threshold reached
9 8192 adnX3FEBEError
. FEBE Physical Layer Convergence
. Protocol (PLCP) counter threshold
. reached
11 16384 adnX3BIP8Error
. 8-bits interleaved parity (BIP-8)
. counter threshold reached
12 32768 adnX3LOFPlcpError
. LOF DS3 PLCP counter threshold
. reached
16 65536 adnX3LOCDError
. Loss-of-cell-delineation (LOCD)
. counter threshold reached
17 131072 adnX3HECCorrected
. Corrected Header Error Control (HEC)
. counter threshold reached
18 262144 adnX3HECUncorrected
. Uncorrected HEC counter threshold
. reached
20 524288 adnX3OOFPlcpError
. Out-of-frame (OOF) PLCP counter
. threshold reached
21 1048576 adnX3LCVError
. Line code violation (LCV) counter
. threshold reached
22 2097152 adnX3UpwardsFIFO
. Upwards cell buffer overflow
26 4194304 adnX3DownwardsFIFO
. Downwards cell buffer overflow
28 8388608 adnX3IdleCode
. Idle Code counter threshold reached
29 16777216 adnX3OOFError
. OOF counter threshold reached
30 33554432 adnX3HBERError
. High bit error rate (HBER) counter
. threshold reached
31 67108864 adnX3ChangeMode
. Change Mode counter threshold reached
Common Name: Line Statusro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.30.1.1.6 |
adnX3LinePerfStatusThis variable indicates the performance status of the
interface. It is a bit map represented as a sum;
therefore, it can represent multiple status
simultaneously.
The adnX3NoDefect bit should be set only if no other
bit is set.
The adnX3UnavailablePeriod indicates that the
interface has entered an unavailable period.
Each CrossingThreshold bit indicates that
the corresponding performance counter has
reached its threshold.
The bit positions are:
1 adnX3NoDefect
2 adnX3UnavailablePeriod
4 adnX3CurrentCrossingThresholdESs
8 adnX3CurrentCrossingThresholdSESs
16 adnX3CurrentCrossingThresholdBBEs
32 adnX3CurrentCrossingThresholdFarEndESs
64 adnX3CurrentCrossingThresholdFarEndSESs
128 adnX3CurrentCrossingThresholdFarEndBBEs
256 adnX3CurrentCrossingThresholdUASs
512 adnX3DayCrossingThresholdESs
1024 adnX3DayCrossingThresholdSESs
2048 adnX3DayCrossingThresholdBBEs
4096 adnX3DayCrossingThresholdFarEndESs
8192 adnX3DayCrossingThresholdFarEndSESs
16384 adnX3DayCrossingThresholdFarEndBBEs
32768 adnX3DayCrossingThresholdUASsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.30.1.1.7 |
adnX3LineHWStatusThis variable indicates the hardware
status of a line.
The given status value corresponds to
the last test initiated by setting the
nominator ifTestType with adnIfTest-
TypeLineHW test identifier.
If the result of the test, given by the
nominator ifTestResult, is different
than 'success' or 'failed', the given
status value is not significant.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnX3LineHWNoDefect bit should
be set only if no other bit is set.
If the status is not significant, all
the bits are reset.
The bit positions are:
(BBT3B, BBT3B2, BBT3B3, or BBT3B4 boards):
1 adnX3LineHWNoDefect
2 BGPHT chip failure
4 BGP45 chip failure on line side
8 DS3 PLPP chip failure on line side
16 Applique failure
(BBE3B, or BBE3B3 boards):
1 adnX3LineHWNoDefect
2 BGPHT chip failure
4 not used
8 BGP43 chip failure on line side
16 MRT chip failure
(BBTP3C board with HATT3C applique):
1 adnX3LineHWNoDefect
2 not used
4 not used
8 PM7346 chip failure on line side
16 applique failure
(BBTP3C board with HATE3C applique):
1 adnX3LineHWNoDefect
2 not used
4 BGP45 chip failure on line side
8 PM7346 chip failure on line side
16 applique failurero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.30.1.1.8 |
adnX3CounterTableThe DS3/E3 ADN Counter table. SEQUENCE OF AdnX3CounterEntry .1.3.6.1.4.1.637.3.1.4.10.30.2 |
adnX3CounterEntryAn entry in the DS3/E3 ADN Counter table. AdnX3CounterEntry .1.3.6.1.4.1.637.3.1.4.10.30.2.1 |
adnX3LOSCounterDuration of loss-of-signal (LOS).
Counter #0 of the ATM core, only
available on BBT3Bx, BBE3Bx and
BBTP3C boards.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.1 |
adnX3AISCounterDuration of alarm indication signal
(AIS).
Counter #2 of the ATM core, only
available on BBT3Bx, BBE3Bx and
BBTP3C boards.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.2 |
adnX3YellowAlarmCounterDuration of far end received failure
(FERF) received from the remote
equipment at DS3 level.
FERF is also called remote alarm
indication (RAI) or received yellow
alarm.
Counter #3 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.3 |
adnX3PBitCounterNumber of P-bit parity errors.
Counter #4 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.4 |
adnX3CBitCounterNumber of C-bit parity errors.
Counter #5 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.5 |
adnX3CBitFebeCounterNumber of C-bit far end block errors
(FEBE).
Counter #6 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.6 |
adnX3LOFCounterDuration of loss-of-frame (LOF).
Counter #7 of the ATM core, only
available on BBT3Bx, BBE3Bx and BBTP3C
boards.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.7 |
adnX3LCVCounterNumber of line code violations (LCV).
Counter #21 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.
Common Name: Line Code Violro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.8 |
adnX3FebeCounterNumber of far end block errors (FEBE).
Counter #9 of the ATM core, only
available on BBE3Bx boards and BBTP3C
board with HATE3C applique.ro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.9 |
adnX3PathferfCounterDuration of far end received failure
(FERF) received from the remote
equipment at path level.
FERF is also called remote alarm
indication (RAI) or received yellow
alarm.
Counter #10 of the ATM core, only
available on BBE3Bx boards and BBTP3C
board with HATE3C applique.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.10 |
adnX3Bip8CounterNumber of 8-bits interleaved parity
(BIP-8) errors.
Counter #11 of the ATM core, only
available on BBE3Bx boards and BBTP3C
board with HATE3C applique.ro Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.11 |
adnX3OOFCounterNumber of out-of-frame (OOF) errors.
Counter #29 of the ATM core, only
available on BBT3Bx, BBE3Bx and BBTP3C
boards.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.10.30.2.1.12 |
adnX3HECCorrectedCounterNumber of cells corrected through Header
Error Control (HEC) mechanisms.
Counter #17 of the ATM core, only
available on BBE3B board.roobsolete Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.10.30.2.1.13 |
adnX3HECUncorrectedCounterNumber of cells discarded through Header
Error Control (HEC) mechanisms.
Counter #18 of the ATM core, only
available on BBT3B and BBE3B boards.roobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.14 |
adnX3UpwardsFIFOCounterNumber of upward (from remote equipment)
cell buffer overflow events, only
available on BBT3B and BBE3B boards.
Counter #22 of the ATM coreroobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.15 |
adnX3DownwardsFIFOCounterNumber of downward (to remote equipment)
cell buffer overflow events, only
available on BBT3B and BBE3B boards.
Counter #26 of the ATM coreroobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.16 |
adnX3HBERCounterDuration of high bit error rate (HBER).
Counter #30 of the ATM core, only
available on BBT3B board.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.17 |
adnX3IdleCodeCounterDuration of idle code reception.
Counter #28 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.18 |
adnX3LOCDCounterDuration of loss-of-cell-delineation
(LOCD).
Counter #16 of the ATM core, only
available on BBT3B and BBE3B boards.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.19 |
adnX3ModeChangeCounterDuration of DS3 application mode
change.
Counter #31 of the ATM core, only
available on BBT3Bx boards and BBTP3C
board with HATT3C applique.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.20 |
adnX3PlcpLOFCounterDuration of loss-of-frame (LOF) at the
Physical Layer Convergence Protocol
(PLCP) level.
Counter #12 of the ATM core, only
available on BBT3B board.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.30.2.1.21 |
adnX3PlcpOOFCounterNumber of out-of-frame (OOF) events
at the Physical Layer Convergence
Protocol (PLCP) level.
Counter #20 of the ATM core, only
available on BBT3B board.roobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.30.2.1.22 |
adnX3CurrentTableThe DS3/E3 Current table. SEQUENCE OF AdnX3CurrentEntry .1.3.6.1.4.1.637.3.1.4.10.30.3 |
adnX3CurrentEntryAn entry in the DS3/E3 Current table. AdnX3CurrentEntry .1.3.6.1.4.1.637.3.1.4.10.30.3.1 |
adnX3CurrentESsNumber of errored seconds (ES) encountered
during the current 15-minute interval.
Common Name: Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.1 |
adnX3CurrentSESsNumber of severely errored seconds (SES)
encountered during the current 15-minute
interval.
Common Name: Severely Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.2 |
adnX3CurrentBBEsNumber of background errored blocks (BBE)
encountered during the current 15-minute
interval.
Common Name: Background Errored Blocksro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.3 |
adnX3CurrentFarEndESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
15-minute interval.
Common Name: Remote Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.4 |
adnX3CurrentFarEndSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Remote Severely Errored Secondsro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.5 |
adnX3CurrentFarEndBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current 15-minute interval.
Common Name: Remote Background Errored Blocksro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.6 |
adnX3CurrentUASsThe number of unavailable seconds (UAS)
encountered during the current 15-minute
interval.
Common Name: Unavailable Timero Gauge .1.3.6.1.4.1.637.3.1.4.10.30.3.1.7 |
adnX3IntervalTableThe DS3/E3 Interval table. SEQUENCE OF AdnX3IntervalEntry .1.3.6.1.4.1.637.3.1.4.10.30.4 |
adnX3IntervalEntryAn entry in the DS3/E3 Interval table. AdnX3IntervalEntry .1.3.6.1.4.1.637.3.1.4.10.30.4.1 |
adnX3IntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into 96
15-minute intervals. The interval identified by
1 is the most recently completed 15-minute interval,
and the interval identified by N is the interval
immediately preceding the one identified by N-1.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.30.4.1.1 |
adnX3IntervalESsNumber of errored seconds (ES) encountered
during a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.2 |
adnX3IntervalSESsNumber of severely errored seconds (SES)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.3 |
adnX3IntervalBBEsNumber of background errored blocks (BBE)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.4 |
adnX3IntervalFarEndESsNumber of errored seconds (ES) encountered
by the remote equipment during a particular
15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.5 |
adnX3IntervalFarEndSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.6 |
adnX3IntervalFarEndBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.7 |
adnX3IntervalUASsNumber of unavailable seconds (UAS)
encountered in a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.4.1.8 |
adnX3DayTableThe DS3/E3 Day table. SEQUENCE OF AdnX3DayEntry .1.3.6.1.4.1.637.3.1.4.10.30.5 |
adnX3DayEntryAn entry in the DS3/E3 Day table. AdnX3DayEntry .1.3.6.1.4.1.637.3.1.4.10.30.5.1 |
adnX3DayESsNumber of errored seconds (ES) encountered
during the current day (from 0 hours to the
current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.1 |
adnX3DaySESsNumber of severely errored seconds (SES)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.2 |
adnX3DayBBEsNumber of background errored blocks (BBE)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.3 |
adnX3DayFarEndESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
day (from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.4 |
adnX3DayFarEndSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.5 |
adnX3DayFarEndBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.6 |
adnX3DayUASsNumber of unavailable seconds (UAS)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.5.1.7 |
adnX3TotalTableThe DS3/E3 Total table. SEQUENCE OF AdnX3TotalEntry .1.3.6.1.4.1.637.3.1.4.10.30.6 |
adnX3TotalEntryAn entry in the DS3/E3 Total table. AdnX3TotalEntry .1.3.6.1.4.1.637.3.1.4.10.30.6.1 |
adnX3TotalESsNumber of errored seconds (ES) encountered
during the 24-hour reporting period.
It is the sum of ES statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.1 |
adnX3TotalSESsNumber of severely errored seconds (SES)
encountered during the 24-hour reporting
period.
It is the sum of SES statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.2 |
adnX3TotalBBEsNumber of background errored blocks (BBE)
encountered during the 24-hour reporting period.
It is the sum of BBE statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.3 |
adnX3TotalFarEndESsNumber of errored seconds (ES) encountered
by the remote equipment during the 24-hour
reporting period.
It is the sum of Far End ES statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.4 |
adnX3TotalFarEndSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the 24-hour reporting period.
It is the sum of Far End SES statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.5 |
adnX3TotalFarEndBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the 24-hour reporting period.
It is the sum of Far End BBE statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.6 |
adnX3TotalUASsNumber of unavailable seconds (UAS)
encountered during the 24-hour reporting
period.
It is the sum of UAS statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.30.6.1.7 |
adnRs232 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.33 |
adnRs232InSigTableA list of port input control signal entries,
implemented and visible to the software on the port,
and useful to monitor. SEQUENCE OF AdnRs232InSigEntry .1.3.6.1.4.1.637.3.1.4.10.33.1 |
adnRs232InSigEntryInput control signal status for a hardware port. AdnRs232InSigEntry .1.3.6.1.4.1.637.3.1.4.10.33.1.1 |
adnRs232InSigPortIndexThe value of adnRs232PortIndex for the port to which
this entry belongs.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.33.1.1.1 |
adnRs232InSigNameIdentification of a hardware input signal, as follows:
tm Test Mode
lal Local Loop
rdl Remote Loop
x21cont X.21 Control
x21ind X.21 Indication
cts Clear To Send
dsr Data Set Ready
dcd Received Line Signal Detector
The cts, dsr and dcd signals are repeated from RFC 1659
to provide an index to object adnRs232InSigDuration.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.33.1.1.2 |
adnRs232InSigStateThe current input signal state.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.33.1.1.3 |
adnRs232InSigChangesThe number of times the input signal has changed from
'on' to 'off' or from 'off' to 'on'.
'NoSuchInstance' is returned in case of the HBCEU board.ro Counter .1.3.6.1.4.1.637.3.1.4.10.33.1.1.4 |
adnRs232InSigDurationThe duration the input signal has been in the 'on'
state for the tm(1), cts(6), dsr(7), dcd(8) signals
of the HBCEU board.
The duration the input signal has been in the 'off'
state for the x21ind(5) signal of the HBCEU board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.33.1.1.5 |
adnRs232OutSigTableA list of port output control signal entries,
implemented and visible to the software on the port,
and useful to monitor. SEQUENCE OF AdnRs232OutSigEntry .1.3.6.1.4.1.637.3.1.4.10.33.2 |
adnRs232OutSigEntryOutput control signal status for a hardware port. AdnRs232OutSigEntry .1.3.6.1.4.1.637.3.1.4.10.33.2.1 |
adnRs232OutSigPortIndexThe value of adnRs232PortIndex for the port to which
this entry belongs.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.33.2.1.1 |
adnRs232OutSigNameIdentification of a hardware output signal, as follows:
tm Test Mode
lal Local Loop
rdl Remote Loop
x21cont X.21 Control
x21ind X.21 Indication
cts Clear To Send
dsr Data Set Ready
dcd Received Line Signal Detector
The cts, dsr and dcd signals are repeated from RFC 1659
for consistency with object adnRs232InSigName.
The cts, dsr and dcd signals aren't used in
adnRs232OutSigTable.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.33.2.1.2 |
adnRs232OutSigStateThe current output signal state.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.33.2.1.3 |
adnRs232OutSigChangesThe number of times the output signal has changed from
'on' to 'off' or from 'off' to 'on'.
'NoSuchInstance' is returned in case of the HBCEU board.ro Counter .1.3.6.1.4.1.637.3.1.4.10.33.2.1.4 |
adnRs232PortTableA list of port entries. SEQUENCE OF AdnRs232PortEntry .1.3.6.1.4.1.637.3.1.4.10.33.3 |
adnRs232PortEntryADN specific parameters values for a port. AdnRs232PortEntry .1.3.6.1.4.1.637.3.1.4.10.33.3.1 |
adnRs232PortIndexThe value of ifIndex of the portro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.33.3.1.1 |
adnRs232PortDurationThe duration for which the line has been in the 'off' state.
This object applies to V35 and V36 lines of the HBCEU board.
The 'off' state of the line is defined by :
NOT (dcd up AND tm down AND (dsr up OR cts up)).ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.33.3.1.2 |
adnsonetMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39 |
adnsonetObjects OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.1 |
adnsonetMedium OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.1.1 |
adnsonetMediumTableThe ADN SONET/SDH Medium table. SEQUENCE OF AdnSonetMediumEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1 |
adnsonetMediumEntryAn entry in the ADN SONET/SDH Medium table. AdnSonetMediumEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1 |
adnsonetMediumStatusThis variable indicates the status
of the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetMediumNoDefect bit should
be set only if no other bit is set.
The bit positions are:
1 adnsonetMediumNoDefect
2 adnsonetMediumLaserDegradation
4 adnsonetMediumLaserTransmitSignalOut
8 adnsonetMediumAppliqueFailure (obsolete)
Common Name: Medium Statero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.1 |
adnsonetMediumLaserDegradationDuration of laser degradation.
Counter #23 of the ATM core, only
available on BBS1Bx board with HAS1B
applique and on BBTS1C board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.2 |
adnsonetMediumLaserTransmitSignalOutDuration of transmit signal out of
range.
Counter #24 of the ATM core, only
available on BBS1Bx board with HAS1B
applique and on BBTS1C board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.3 |
adnsonetMediumAppliqueFailureDuration of applique board failure.
Counter #27 of the ATM core.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.4 |
adnsonetMediumConfigLineClockModeThe transmit clock mode of the line:
- local timing: the transmit clock is
generated by the local board,
- loop timing: the transmit clock is
the one received from the remote
equipment,
- through timing: the transmit clock is
derived from the recovered receive
clock of another interface of the HSS.
Common Name: Transmit Clock Moderw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.5 |
adnsonetMediumConfigLaserPowerThe administrative status of the laser LED
on the applique:
- LaserON: laser LED in service with
automatic laser shutdown (ALS) function
disabled,
- LaserOFF: laser LED out of service,
- LaserNS: laser LED not supported by
the applique,
- LaserONALS: laser LED in service with
ALS function enabled.
Common Name: Laser Powerrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.1.1.1.1.6 |
adnsonetSection OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.1.2 |
adnsonetSectionTableThe ADN SONET/SDH Section Current table. SEQUENCE OF AdnSonetSectionEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1 |
adnsonetSectionEntryAn entry in the ADN SONET/SDH Section Current table. AdnSonetSectionEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1 |
adnsonetSectionStatusThis variable indicates the status
of the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetSectionNoDefect bit should
be set only if no other bit is set.
The bit positions are:
1 adnsonetSectionNoDefect
2 adnsonetSectionLOS
4 adnsonetSectionLOF
8 adnsonetSectionOOF
Common Name: Section Statero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.1 |
adnsonetSectionLOSDuration of loss-of-signal (LOS).
Counter #0 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.2 |
adnsonetSectionLOFDuration of loss-of-frame (LOF).
Counter #7 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.3 |
adnsonetSectionOOFNumber of out-of-frame (OOF) events.
Counter #29 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.4.10.39.1.2.1.1.4 |
adnsonetLine OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.1.3 |
adnsonetLineTableThe ADN SONET/SDH Line Current table. SEQUENCE OF AdnSonetLineEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1 |
adnsonetLineEntryAn entry in the ADN SONET/SDH Line Current table. AdnSonetLineEntry .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1 |
adnsonetLineStatusThis variable indicates the status
of the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetLineNoDefect bit should
be set only if no other bit is set.
The bit positions are:
1 adnsonetLineNoDefect
2 adnsonetLineAIS
4 adnsonetLineRDI
8 adnsonetLineBIP
16 adnsonetLineHighBIP
Common Name: Line Statero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.1 |
adnsonetLineAISDuration of alarm indication signal (AIS).
Counter #2 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.2 |
adnsonetLineRcvRDIDuration of remote defect indication (RDI)
received from the remote equipement.
For a Synchronous Digital Hierarchy (SDH)
line, the RDI signal is known as Multiplexing
Section Far End Receive Failure (MS-FERF).
Counter #3 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.3 |
adnsonetLineBIPNumber of 24-bit interleaved parity
(BIP-24) errors for STS-3c or STM-1.
Number of 96-bit interleaved parity
(BIP-96) errors for STS-12c or STM-4.
Counter #28 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.4 |
adnsonetLineConfigLoopbackThis variable indicates if line loopback
is activated or deactivated.
When activated, received frames are
retransmitted on the line.
Common Name: Line Loopbackrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.5 |
adnsonetLineConfigRDIThis variable indicates if a permanent
remote defect indication (RDI) or Far End
Receive Failure (FERF) is sent on the line.
It is a configuration option that should
be used only for maintenance purposes.
Common Name: Forcing a Line Remote Defect
Indicationrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.6 |
adnsonetLineConfigAISThis variable indicates if a permanent
alarm indication signal (AIS) can be sent
on the line.
For STM-1 interfaces, this option can't be
activated (AIS off).
For STS-3c, STS-12c, and STM-4 interfaces,
this option can be activated
(AIS off or AIS on).
It is a configuration option that should
be used only for maintenance purposes.
Common Name: Forcing a Line Alarm Indication
Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.1.3.1.1.7 |
adnsonetObjectsPath OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.2 |
adnsonetPath OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.2.1 |
adnsonetPathTableThe ADN SONET/SDH Path Current table. SEQUENCE OF AdnSonetPathEntry .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1 |
adnsonetPathEntryAn entry in the ADN SONET/SDH Path Current table. AdnSonetPathEntry .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1 |
adnsonetPathWidthThe type of Synchronous Optical
Network/Synchronous Digital Hierarchy
(SONET/SDH) path.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.1 |
adnsonetPathStatusThis variable indicates the status
of the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetPathNoDefect bit should
be set only if no other bit is set.
The bit positions are:
1 adnsonetLineNoDefect
2 adnsonetPathSTSLOP
4 adnsonetPathSTSAIS
8 adnsonetPathSTSRDI
16 adnsonetPathUnequipped *
32 adnsonetPathSignalLabelMismatch *
64 adnsonetPathBIP8
128 adnsonetPathFEBE
* not provided by HSS, but the value is
required to ensure compatibility with
the RFC sonetPathStatus.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.2 |
adnsonetPathLOPDuration of loss-of-pointer (LOP).
Counter #12 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.3 |
adnsonetPathAISDuration of alarm indication signal
(AIS) at path level.
Counter #8 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.4 |
adnsonetPathRcvRDIDuration of remote defect indication
(RDI) received from the remote
equipment at path level.
For Synchronous Digital Hierarchy (SDH),
this signal is known as a path Far End
Receive Failure (FERF) event.
Counter #10 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.5 |
adnsonetPathBIP8Number of 8-bit interleaved parity
(BIP-8) errors.
Counter #11 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.6 |
adnsonetPathFEBENumber of far end block errors (FEBE)
received from the remote equipment at
path level.
Counter #9 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.7 |
adnsonetPathConfigRDIThis variable indicates if a permanent
remote defect indication (RDI) is sent
on the path.
For Synchronous Digital Hierarchy (SDH),
it indicates if a permanent Far End Receive
Failure (FERF) can be sent on the path.
This is a configuration option that should
be used only for maintenance purposes.
Common Name: Forcing a Path Remote Defect
Indicationrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.8 |
adnsonetPathConfigAISThis variable indicates if a permanent
alarm indication signal (AIS) is sent
on the path.
This is a configuration option that should
be used only for maintenance purposes.
Common Name: Forcing a Path Alarm Indication
Signalrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.2.1.1.1.9 |
adnsonetObjectsTC OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.3 |
adnsonetTC OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.3.1 |
adnsonetTCTableThe ADN SONET/SDH Transmission
Convergence (TC) Current table.obsolete SEQUENCE OF AdnSonetTCEntry .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1 |
adnsonetTCEntryAn entry in the ADN SONET/SDH Transmission
Convergence (TC) Current table.obsolete AdnSonetTCEntry .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1 |
adnsonetTCStatusThis variable indicates the status
of the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetTCNoDefect bit should
be set only if no other bit is set.
The bit positions are:
1 adnsonetTCNoDefect
2 adnsonetTCOCD
4 adnsonetTCCorrectedHEC
8 adnsonetTCUnCorrectedHEC
16 adnsonetTCUpBufferOverflow
32 adnsonetTCDownBufferOverflow
64 adnsonetTCETtoLTLossroobsolete INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.1 |
adnsonetTCOCDDuration of out-of-cell delineation
(OCD).
Counter #16 of the ATM core.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.2 |
adnsonetTCCorrectedHECNumber of cells corrected through Header
Error Control (HEC) mechanisms.
Counter #17 of the ATM core.roobsolete Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.3 |
adnsonetTCUnCorrectedHECNumber of cells discarded through Header
Error Control (HEC) mechanisms.
Counter #18 of the ATM core.roobsolete Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.4 |
adnsonetTCUpBufferOverflowNumber of upward (from remote equipment)
cell buffer overflow events.
Counter #22 of the ATM core.roobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.5 |
adnsonetTCDownBufferOverflowNumber of downward (to remote equipment)
cell buffer overflow events.
Counter #26 of the ATM core.roobsolete Counter .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.6 |
adnsonetTCETtoLTLossDuration of loss of ATM signal from
exchange termination processor (ET) to
linetermination processor (LT).
Counter #25 of the ATM core.roobsolete Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.7 |
adnsonetTCConfigCRDThe type of cell rate decoupling (CRD) mode
selected for the line:
- unassigned cells (ANSI)
- idle cells (ITU).
Common Name: Cell Rate Decouplingrwobsolete Enumeration .1.3.6.1.4.1.637.3.1.4.10.39.3.1.1.1.8 |
adnsonetObjectsITUperf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.4 |
adnsonetITUperf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.4.1 |
adnsonetCurrentTableThe ADN SONET/SDH Current table. SEQUENCE OF AdnSonetCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1 |
adnsonetCurrentEntryAn entry in the ADN SONET/SDH Current table. AdnSonetCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1 |
adnsonetCurrentESsNumber of errored seconds (ES) encountered
during the current 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.1 |
adnsonetCurrentSESsNumber of severely errored seconds (SES)
encountered during the current 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.2 |
adnsonetCurrentBBEsNumber of background errored blocks (BBE)
encountered during the current 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.3 |
adnsonetCurrentUASsThe number of unavailable seconds (UAS)
encountered during the current 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.1.1.4 |
adnsonetIntervalTableThe ADN SONET/SDH Interval table. SEQUENCE OF AdnSonetIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2 |
adnsonetIntervalEntryAn entry in the ADN SONET/SDH Interval table. AdnSonetIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1 |
adnsonetIntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into
96 15-minute intervals.
The interval identified by 1 is the most
recently completed 15-minute interval and the
interval identified by N is the interval
immediately preceding the one identified
by N-1. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.1 |
adnsonetIntervalESsNumber of errored seconds (ES) encountered
during a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.2 |
adnsonetIntervalSESsNumber of severely errored seconds (SES)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.3 |
adnsonetIntervalBBEsNumber of background errored blocks (BBE)
encountered during a particular 15-minute
interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.4 |
adnsonetIntervalUASsNumber of unavailable seconds (UAS)
encountered in a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.2.1.5 |
adnsonetTotalTableThe ADN SONET/SDH Total table. SEQUENCE OF AdnSonetTotalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3 |
adnsonetTotalEntryAn entry in the ADN SONET/SDH Total table. AdnSonetTotalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1 |
adnsonetTotalESsNumber of errored seconds (ES) encountered
during the 24-hour reporting period.
It is the sum of ES statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.1 |
adnsonetTotalSESsNumber of severely errored seconds (SES)
encountered during the 24-hour reporting
period.
It is the sum of SES statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.2 |
adnsonetTotalBBEsNumber of background errored blocks (BBE)
encountered during the 24-hour reporting period.
It is the sum of BBE statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.3 |
adnsonetTotalUASsNumber of unavailable seconds (UAS)
encountered during the 24-hour reporting
period.
It is the sum of UAS statistics for the
96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.3.1.4 |
adnsonetDayTableThe ADN SONET/SDH Day table. SEQUENCE OF AdnSonetDayEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4 |
adnsonetDayEntryAn entry in the ADN SONET/SDH Day table. AdnSonetDayEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1 |
adnsonetDayESsNumber of errored seconds (ES) encountered
during the current day (from 0 hours to the
current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.1 |
adnsonetDaySESsNumber of severely errored seconds (SES)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.2 |
adnsonetDayBBEsNumber of background errored blocks (BBE)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.3 |
adnsonetDayUASsNumber of unavailable seconds (UAS)
encountered during the current day (from
0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.1.4.1.4 |
adnsonetFarEndITUperf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.4.2 |
adnsonetFarEndCurrentTableThe ADN SONET/SDH Far End Current table. SEQUENCE OF AdnSonetFarEndCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.1 |
adnsonetFarEndCurrentEntryAn entry in the ADN SONET/SDH Far End
Current table. AdnSonetFarEndCurrentEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1 |
adnsonetFarEndCurrentESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.1 |
adnsonetFarEndCurrentSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.2 |
adnsonetFarEndCurrentBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.1.1.3 |
adnsonetFarEndIntervalTableThe ADN SONET/SDH Far End Interval table. SEQUENCE OF AdnSonetFarEndIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2 |
adnsonetFarEndIntervalEntryAn entry in the ADN SONET/SDH Far
End Interval table. AdnSonetFarEndIntervalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1 |
adnsonetFarEndIntervalNumberA number which identifies the interval for
which the set of statistics is available.
The previous 24-hour period is divided into
96 15-minute intervals.
The interval identified by 1 is the most
recently completed 15-minute interval and the
interval identified by N is the interval
immediately preceding the one identified
by N-1. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.1 |
adnsonetFarEndIntervalESsNumber of errored seconds (ES) encountered
by the remote equipment during a particular
15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.2 |
adnsonetFarEndIntervalSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.3 |
adnsonetFarEndIntervalBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
a particular 15-minute interval.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.2.1.4 |
adnsonetFarEndTotalTableThe ADN SONET/SDH Far End Total table. SEQUENCE OF AdnSonetFarEndTotalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.3 |
adnsonetFarEndTotalEntryAn entry in the ADN SONET/SDH Far End
Total table. AdnSonetFarEndTotalEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1 |
adnsonetFarEndTotalESsNumber of errored seconds (ES) encountered
by the remote equipment during the 24-hour
reporting period.
It is the sum of Far End ES statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.1 |
adnsonetFarEndTotalSESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the 24-hour reporting period.
It is the sum of Far End SES statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.2 |
adnsonetFarEndTotalBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the 24-hour reporting period.
It is the sum of Far End BBE statistics for
the 96 15-minute intervals.ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.3.1.3 |
adnsonetFarEndDayTableThe ADN SONET/SDH Far End Day table. SEQUENCE OF AdnSonetFarEndDayEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.4 |
adnsonetFarEndDayEntryAn entry in the ADN SONET/SDH Far End
Day table. AdnSonetFarEndDayEntry .1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1 |
adnsonetFarEndDayESsNumber of errored seconds (ES) encountered
by the remote equipment during the current
day (from 0 hours to the current time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.1 |
adnsonetFarEndDaySESsNumber of severely errored seconds (SES)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.2 |
adnsonetFarEndDayBBEsNumber of background errored blocks (BBE)
encountered by the remote equipment during
the current day (from 0 hours to the current
time).ro Gauge .1.3.6.1.4.1.637.3.1.4.10.39.4.2.4.1.3 |
adnsonetObjectsMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.5 |
adnsonetMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.39.5.1 |
adnsonetMaintenanceTableThe ADN SONET/SDH Maintenance table. SEQUENCE OF AdnSonetMaintenanceEntry .1.3.6.1.4.1.637.3.1.4.10.39.5.1.1 |
adnsonetMaintenanceEntryAn entry in the ADN SONET/SDH Maintenance table. AdnSonetMaintenanceEntry .1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1 |
adnsonetLineHWStatusThis variable indicates the hardware
status of a line.
The given status value corresponds to
the last test initiated by setting the
nominator ifTestType with adnIfTest-
TypeLineHW test identifier.
If the result of the test, given by the
nominator ifTestResult, is different
than 'success' or 'failed', the given
status value is not significant.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetLineHWNoDefect bit should
be set only if no other bit is set.
If the status is not significant, all
the bits are reset.
The bit positions are :
(BBTS1C board):
1 adnsonetLineHWNoDefect
2 not used
4 not used
8 PM5357 chip failure at line side
16 applique failure
(BBS1B, BBS1B3, BBS1B2, or BBS1B4 boards):
1 adnsonetLineHWNoDefect
2 BGPHT chip failure
4 BGS1B chip failure at ET side
8 BGS1B chip failure at line side
16 applique failure
(BBS4B, or BBS4B2 boards):
1 adnsonetLineHWNoDefect
2 BGPHT chip failure
4 not used
8 PM5355 chip failure at line side
16 applique failurero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1.1 |
adnsonetLinePerfStatusThis variable indicates the performance status of
the interface.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnsonetNoDefect bit should be set
only if no other bit is set.
The adnsonetUnavailablePeriod bit indicates
that the interface has entered an unavailable
period.
Each CrossingThreshold bit indicates that
the corresponding performance counter has
reached its threshold.
The bit positions are:
1 adnsonetNoDefect
2 adnsonetUnavailablePeriod
4 adnsonetCurrentCrossingThresholdESs
8 adnsonetCurrentCrossingThresholdSESs
16 adnsonetCurrentCrossingThresholdBBEs
32 adnsonetCurrentCrossingThresholdFarEndESs
64 adnsonetCurrentCrossingThresholdFarEndSESs
128 adnsonetCurrentCrossingThresholdFarEndBBEs
256 adnsonetCurrentCrossingThresholdUASs
512 adnsonetDayCrossingThresholdESs
1024 adnsonetDayCrossingThresholdSESs
2048 adnsonetDayCrossingThresholdBBEs
4096 adnsonetDayCrossingThresholdFarEndESs
8192 adnsonetDayCrossingThresholdFarEndSESs
16384 adnsonetDayCrossingThresholdFarEndBBEs
32768 adnsonetDayCrossingThresholdUASsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.39.5.1.1.1.2 |
adnFrnetservMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.10.44 |
adnFrChanTableThis table is an extension of the Frame Relay Management
Signalling Group table and the Frame Relay Logical Port
Group table from RFC1604. SEQUENCE OF AdnFrChanEntry .1.3.6.1.4.1.637.3.1.4.10.44.1 |
adnFrChanEntryAn entry in the channel table. There will be one entry
for each FRS (Frame Relay Service) channel configured. AdnFrChanEntry .1.3.6.1.4.1.637.3.1.4.10.44.1.1 |
adnFrChanBATThis is the bandwidth allocation threshold for the
channel. A value exceeding 80% is not recommended for
sustained traffic loads.
Common Name: BAT(%)ro AdnPercent -- UNITS Percent .1.3.6.1.4.1.637.3.1.4.10.44.1.1.1 |
adnFrChanAccountingThis indicates if accounting is enabled for the VCs on
this channel.
Common Name: Accountingrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.2 |
adnFrChanStatisticsThis indicates if statistics are enabled for this
channel. When enabled, performance information is
reported to the NMS.
Common Name: Statisticsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.3 |
adnFrChanLineTypeThis indicates if this channel is a FRIC (frame relay
interface code) or FRAD (frame relay assembler/disassembler)
or a frx channel. FRIC allows devices to use the frame relay
backbone with Q.922A frames. FRAD allows any
HDLC-compatible device to use frame relay by encapsulating
the HDLC frame with the required Q.922A frame. FRX allows
PSX switches to connect to a HSS switch as a special
access devices. IP (Internet Protocol) indicates this
channel allows IP services.
Common Name: Line Typero Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.1.1.4 |
adnFrChanCongsStateThis indicates the congestion level of this channel in the
egress direction. Depending on the congestion level, some
frames may be discarded. Frames are discarded according
to a priority scheme. Note that an idle channel may also be
classified as congested due to restricted internal
resources.
Common Name: Egress Congestion Levelro AdnCongestLevels .1.3.6.1.4.1.637.3.1.4.10.44.1.1.5 |
adnFrChanProcedThe value of this object identifies the LIS (local
in-channel signalling) procedure that is used for
this UNI/NNI logical port. The UNI/NNI logical
port can be performing user-to-network
network-side procedures, bidirectional,
user-to-network user-side procedures, or other.
This object is configured and replaces
frMgtVCSigProced, which is not configured.
frMgtVCSigProced is readable via SNMP and
mirrors this object.
Common Name: LIS Interfacero Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.1.1.6 |
adnFrChanVCTrapsThis indicates whether or not VC-level traps and alarms
are reported for this channel. If disabled, then no VC-level
traps or alarms will be reported by any VC on this channel.
Common Name: VC Trapsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.7 |
adnFrChanNxOverBcsThis indicates the number of times Bcs (statistically-
committed data rate) can be over-subscribed for user
traffic on this channel.
Common Name: # Times Over Subscribe Bcsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.9 |
adnFrChanNxOverBeThis indicates the number of times Be (excess burst
data rate) can be over-subscribed for user traffic
on this channel.
Common Name: # Times Over Subscribe Bero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.10 |
adnFrChanInCIRThis contains the ingress CIR (committed information rate)
of all calls that are active on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.11 |
adnFrChanInBcThis contains the ingress Bc (committed data rate) of all
calls that are active on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.12 |
adnFrChanInBcsThis contains the ingress Bcs (statistically-committed
data rate) of all calls that are active on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.13 |
adnFrChanInBeThis contains the ingress Be (excess burst data rate) of
all calls that are active on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.14 |
adnFrChanOutCIRThis contains the egress CIR (Committed Information Rate)
of all calls that are active on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.15 |
adnFrChanOutBcThis contains the egress Bc of all calls that are active
on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.16 |
adnFrChanOutBcsThis contains the egress Bcs of all calls that are active
on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.17 |
adnFrChanOutBeThis contains the egress Be of all calls that are active
on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.18 |
adnFrChanNumCallActiveThis contains the number of calls that are active on this
channel. This only includes calls that are in the data
transfer state. The object adnFrVCOperState will be 'up(1)'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.19 |
adnFrChanDelaySensitiveThis field indicates whether VCs set up on this channel are
delay sensitive. If this field is set to 'true(1)' then path
selection for all VCs on this channel will be based on the
criterion (delay, monetary cost, hops). Otherwise the value
of adnFrVCDelaySensitive for each VC will be used.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.20 |
adnFrChanVCTypeConfiguredThis object specifies the types of VCs allowed
on this channel/port.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.1.1.21 |
adnFrChanPVCMaxNumAllowedThis is the maximum number of PVCs that can be
configured on the channel.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.22 |
adnFrChanPVCBidirLowThe value of this object is used to indicate the
lower number for the range of bi-directional PVC DLCIs.
This number is only valid if adnFrChanVCTypeConfigured
allows PVCs on this channel and adnFrChanPVCMaxNumAllowed
is greater than 0.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.23 |
adnFrChanPVCBidirHighThe value of this object is used to indicate the
higher number for the range of bi-directional PVC DLCIs.
This number is only valid if adnFrChanVCTypeConfigured
allows PVCs on this channel and adnFrChanPVCMaxNumAllowed
is greater than 0.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.24 |
adnFrChanSVCMaxNumAllowedThis is the maximum number of SVC user calls
allowed on the channel.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.25 |
adnFrChanSVCBidirLowThe value of this object is used to indicate the
lower number for the range of bi-directional SVC DLCIs.
This number is only valid if adnFrChanVCTypeConfigured
allows SVCs on this channel and adnFrChanSVCMaxNumAllowed
is greater than 0.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.26 |
adnFrChanSVCBidirHighThe value of this object is used to indicate the
higher number for the range of bi-directional SVC DLCIs.
This number is only valid if adnFrChanVCTypeConfigured
allows SVCs on this channel and adnFrChanSVCMaxNumAllowed
is greater than 0.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.27 |
adnFrChanSVCUserNetFlgThis indicates whether the interface follows the user or
network side of the protocol recommendations.
Common Name: User/Network Protocol.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.1.1.28 |
adnFrChanSVCT303This timer specifies the amount of time to wait for a
setup response. If the timer expires, then the setup
message is retransmitted. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.29 |
adnFrChanSVCT305This timer specifies the amount of time to wait for a
disconnect response. If the timer expires, then the
release message is transmitted. The timer value is
expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.30 |
adnFrChanSVCT308This timer specifies the amount of time to wait for a
release response. If the timer expires the first time,
then the release message is retransmitted. The timer
value is expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.31 |
adnFrChanSVCT309This data link timer specifies the amount of time to
wait for re-establishment of the LAPD (link access
procedure on the D-channel) link. If the timer
expires, all calls will be cleared. Otherwise, calls in
stable states are not lost. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.32 |
adnFrChanSVCT310This timer specifies the amount of time to wait for a
connect or disconnect after receiving a Call Proceeding.
If the timer expires, then the call is cleared by
transmitting a disconnect message. The timer value is
expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.33 |
adnFrChanSVCT313This timer specifies the amount of time to wait for a
connect response. If the timer expires, then the call
is cleared by transmitting a disconnect message. The
timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.34 |
adnFrChanSVCT315This timer specifies the amount of time to wait for a
status inquiry response. If the timer expires, then the
call is cleared by transmitting a disconnect message.
The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.35 |
adnFrChanSVCT316This timer specifies the amount of time to wait for a
restart response. If the timer expires, then the restart
message is re-transmitted. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.36 |
adnFrChanSVCT317Reserved for future use. This restart confirm timer
specifies the amount of time to wait for clearing
all the calls. The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.37 |
adnFrChanSVCT320Reserved for future use. This inactivity timer specifies
the amount of time to wait for a response to a call.
The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.1.1.38 |
adnFrChanSVCInCallBrThis specifies that call setup messages incoming to the
DTE (from the frame relay network) are not allowed and
will be cleared at the destination.
Common Name: Incoming Calls Barred.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.39 |
adnFrChanSVCOutCallBrThis specifies that call setup messages outgoing from
the DTE (to the frame relay network) are not allowed
and will be cleared at the source.
Common Name: Outgoing Calls Barred.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.40 |
adnFrChanSVCAddrValidThis specifies whether the calling party address in
the setup message will be compared to the source
channel address(es) and whether the connected number
in the connect message will be compared to the
destination channel address(es).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.1.1.41 |
adnFrChanSVCAddrLenIgThis specifies the number of least significant bits
in the address field of the Q.933 SETUP/CONNECT
message should be ignored.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.42 |
adnFrChanSVCMaxNumActiveThis is the count of the maximum number of SVCs
active at one time. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.43 |
adnFrChanSVCCurrentActiveCount of the current number of active SVCs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.44 |
adnFrChanSVCTotalProcessedCount of the total number of SVCs that
have been processed. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.45 |
adnFrChanSVCFailedClrNetCount of failed SVCs that were cleared by the network. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.46 |
adnFrChanSVCFailedClrDTECount of failed SVCs that were cleared by the DTE. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.47 |
adnFrChanSVCSuccessClrNetCount of successful SVCs cleared by the network. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.48 |
adnFrChanSVCSuccessClrDTECount of the successful SVCs cleared by the DTE. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.49 |
adnFrChanSVCMaxAggActCIRMaximum aggregate CIR for active SVCs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.50 |
adnFrChanPVCMaxAggActCIRMaximum aggregate CIR for active PVCs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.51 |
adnFrChanSVCMaxAggNormBeMaximum aggregate normalized Be (Bc/Tc) for
active SVCs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.52 |
adnFrChanPVCMaxAggNormBeMaximum aggregate normalized Be (Bc/Tc) for
active PVCs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.53 |
adnFrChanDefaultCosThis indicates the Class of Service (COS)
for this channel. adnFrChanDefaultCos will
be used for SVCs and all VCs received through
a TPX Gateway. PVCs will use the COS defined
in adnFrVCCos.rw AdnFrCos .1.3.6.1.4.1.637.3.1.4.10.44.1.1.54 |
adnFrChanNumofMSNThis specifies the number of Multiple Subscriber
Numbers (MSN) that can be configured on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.55 |
adnFrChanNxMultiBcThis indicates the number of times Bc (committed data rate)
can be over-subscribed for user traffic on this channel.
Common Name: # Times Over Subscribe Bcrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.56 |
adnFrChanMaxBcAllPVCsThis field represents the maximum value of
adnFrVCOutBc of all PVCs configured
for the channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.57 |
adnFrChanMaxBcsAllPVCsThis field represents the maximum value of
adnFrPVCOutBcs of all PVCs configured
for the channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.58 |
adnFrChanCosRtBcEgressThis is the sum of committed egress bandwidth for
Class of Service (COS) 'cosRt(1)'.
Common Name: COS Real Time Commit Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.4.10.44.1.1.59 |
adnFrChanCosRtBcIngressThis is the sum of committed ingress bandwidth for
Class of Service (COS) 'cosRt(1)'.
Common Name: COS Real Time Bc Commit Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.4.10.44.1.1.60 |
adnFrChanCosNrtBcEgressThis is the sum of committed egress bandwidth for
Class of Service (COS) 'cosNrt(2)'.
Common Name: COS Non Real Time Bc Commit Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.4.10.44.1.1.61 |
adnFrChanCosNrtBcIngressThis is the sum of committed ingress bandwidth for
Class of Service (COS) 'cosNrt(2)'.
Common Name: COS Non Real Time Bc Commit Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.4.10.44.1.1.62 |
adnFrChanBwAllocatedThis is the bandwidth allocated to all VCs on this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.63 |
adnFrChanBwAvailThis is the bandwidth available to this channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.1.1.64 |
adnFrVCTableThese are the PVC table extensions to the PVC End-Point
table in RFC1604. This table is used for PVCs and SVCs. SEQUENCE OF AdnFrVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.2 |
adnFrVCEntryVC table entry. AdnFrVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.2.1 |
adnFrVCRemNodeIDThis is the routing node ID of the destination node for
this VC. It is an integer that ROUTES (HSS routing
application) uses to route this call to the proper
destination node.
Common Name: Remote Node IDro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.2.1.1 |
adnFrVCRemNumPlanThis is the numbering plan of the interface
on the node at the remote end of the VC.
Common Name: Remote Numbering Planro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.2 |
adnFrVCRemPhysAddressThis is the address of the interface on the
node at the remote end of the VC. The numbering
plan for that interface is given by the value of
adnFrVCRemNumPlan.
Common Name: Remote addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.3 |
adnFrVCRemDlciThis is the DLCI (data link connection identifier) of
this VC on the interface on the node at the remote
end of the VC.
Common Name: Remote DLCIro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.4 |
adnFrVCAdminStateThe desired state of this call.
Common Name: Status Administrative, Administrativerw Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.5 |
adnFrVCOperStateThe current state of this call.
Common Name: Status Operational, Operationalro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.6 |
adnFrVCTimeThe time the VC was initialized. For a PVC, this is the
time the PVC was configured.
Common Name: Last Changero AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.4.10.44.2.1.7 |
adnFrVCInBcsThis specifies the Bcs (statistically-committed data rate)
for ingress data.
Common Name: Ingress Bcsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.8 |
adnFrVCOutBcsThis specifies the Bcs (statistically-committed data rate)
for egress data.
Common Name: Egress Bcsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.9 |
adnFrVCUserOrNetThis indicates if this is a User or Network call. The
priority given to each type of call's data in the network
differs.
Common Name: Type of Callro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.10 |
adnFrVCLisDiscardThis object indicates whether FRS should discard ingress
data if the LIS (Local In-channel Signalling) status for
this PVC is inactive. If this is 'discard(1)' and the
local or remote LIS status is down, then ingress data is
discarded. If this is 'nodiscard(2)', then regardless of
LIS status, the ingress data is not discarded.
Common Name: LIS Discard Actionro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.11 |
adnFrVCRetryAttemptsThis specifies the number of PVC call attempts to make
at the fast rate (adnFrVCFastRetry) before slowing
the call attempt rate to adnFrVCSlowRetry. This only
has significance if adnFrVCSourceDest is 'source(1)'.
The current attempt state is in adnFrVCAttemptState.
Common Name: Fast Rate Retryro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.12 |
adnFrVCFastRetryThis timer specifies the amount of time to wait between
failed PVC setup attempts. After attempting this rate for
adnFrVCRetryAttempts times, the rate will be slowed to
adnFrVCSlowRetry. This only has significance if
adnFrVCSourceDest is 'source(1)'.
Common Name: Fast Rate Retry Timerrw INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.2.1.13 |
adnFrVCSlowRetryThis timer specifies the amount of time to wait
between failed PVC setup attempts. After attempting the
adnFrVCFastRetry rate for adnFrVCRetryAttempts times,
the rate will be slowed to adnFrVCSlowRetry. This only
has significance if adnFrVCSourceDest is 'source(1)'.
Common Name: Slow Rate Retry Timerrw INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.2.1.14 |
adnFrVCForcedPathThis specifies that this PVC has a forced path
specified in the adnFrForceRoute table. If this object
is set to 'enabled(1)' and there is no adnFrForceEntry
for this PVC, then the PVC will be treated as
if adnFrVCForcedPath has the value 'disabled(2)'.
Common Name: Forced Pathro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.2.1.15 |
adnFrVCSourceDestThis object indicates the call direction of this PVC.
If it has the value 'source(1)', the FRS (frame relay
Subscriber) subsystem will initiate the call. If it has the
value 'destination(2)', FRS will wait for an incoming call
request.
Common Names: Source or Destination, Src/Destro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.16 |
adnFrVCFrameINThis counts the number of frames forwarded to the
network for this VC. Note that the value of
frPVCEndptInFrames from RFC1604 gives the frames received
from the user. This counter does not include the
'dummy' frames generated by congestion control. It
does include the DQ (data qualified) frames, used to
exchange status information with the FRS subsystem at the
remote end of a call.
Common Name: Frame Inro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.17 |
adnFrVCFrameOUTThis counts the number of frames received from the
network for this VC. Note that the value of
frPVCEndptOutFrames from RFC1604 gives the frames sent
to the user. This counter does not include the number of
'dummy' frames generated by congestion control. It does
include the DQ (data qualified) frames.
Common Name: Frame Outro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.18 |
adnFrVCSubFrameINThis counts the number of sub-frames forwarded to the
network for this VC. Note that the value of
frAccountPVCInSegments from RFC1604 gives the number of
sub-frames received from the user.
Common Name: Sub Frame Inro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.19 |
adnFrVCSubFrameOUTThis counts the number of sub-frames received from the
network for this VC. Note that the value of
frAccountPVCOutSegments from RFC1604 gives the
number of sub-frames sent to the user.
Common Name: Sub Frames Outro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.20 |
adnFrVCBeInDiscardsThis indicates the number of ingress Be (excessive burst
data rate) frames that were discarded at the interface due
to network congestion.
Common Name: Be Frame In Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.21 |
adnFrVCBcsInDiscardsThis indicates the number of ingress Bcs (statistically-
committed data rate) frames that were discarded at the
interface due to network congestion.
Common Name: Bcs Frame In Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.22 |
adnFrVCBcInDiscardsThis indicates the number of ingress Bc (committed data
rate) frames that were discarded at the interface due to
network congestion.
Common Name: Bc Frame In Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.23 |
adnFrVCBeOutDiscardsThis indicates the number of egress Be (excessive burst data
rate) frames that were discarded at the interface due to
network congestion.
Common Name: Be Frame Out Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.24 |
adnFrVCBcsOutDiscardsThis indicates the number of egress Bcs (statistically-
committed data rate) frames that were discarded at the
interface due to network congestion.
Common Name: Bcs Frame Out Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.25 |
adnFrVCBcOutDiscardsThis indicates the number of egress Bc (committed data rate)
frames that were discarded at the interface due to network
congestion.
Common Name: Bc Frame Out Discardsro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.26 |
adnFrVCInCongsStateThis indicates the congestion level of this VC in the
ingress direction. Depending on the congestion level, some
frames from the user may be discarded. Frames are discarded
according to a priority scheme. Note that an idle VC may
also be classified as congested due to restricted internal
resources.
Common Name: Ingress Congestion Levelro AdnCongestLevels .1.3.6.1.4.1.637.3.1.4.10.44.2.1.27 |
adnFrVCDiscardLisInThis indicates the number of ingress frames that were
discarded because LIS (local in-channel signalling)
declared the PVC inactive. This value will increment only if
adnFrVCLisDiscard is set to 'discard(1)'.
Common Name: Frames In Discarded (LIS down)ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.28 |
adnFrVCNumRelinksIndicates the number of times the call was
successfully connected.
Common Name: # of Successful Linksro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.29 |
adnFrVCNumNodesThis indicates the number of nodes in the VC connection
If adnFrVCOperState is 'up(1)', then this gives the
current hop count. If the adnFrVCOperState is not
'up(1)', this this gives the hop count of the last
connection.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.30 |
adnFrVCTypeThis specifies the type of this connection: other,
pvc ( permanent virtual connection ), svc ( switched
virtual connection ) or mspvc ( multi-source
permanent virtual connection ).
Common Name: Typero Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.31 |
adnFrVCOutifIndexThis is the ifIndex of the interface on which this VC
exits this node away from this VC endpoint. It is
usually a trunk interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.32 |
adnFrVCOutDlciThis is the DLCI (data link connection identifier) of
the VC on the interface on which it exits this node away
from this VC endpoint. This can be combined with
adnFrVCOutifIndex and used for call tracing.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.33 |
adnFrVCISRThis is the initial submission rate (ISR) for ingress
traffic. When the VC is determined to be idle in the
ingress direction, the submission information rate
(SIR) is set to the the ISR.
Common Name: Initial Submission Ratero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.34 |
adnFrVCAttemptStateThis contains the current VC call attempt state. This
will start out as 'fast(1)' or 'rxcall(3)' depending on
adnFrVCSourceDest. If adnFrVCSourceDest has the value
'source(1)', and the call attempt fails adnFrVCRetryAttempt
times, then the call will be attempted at the slow rate
(adnFrVCSlowRetry) and this object will be set to 'slow(2)'.
Common Name: Attempt Statero Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.35 |
adnFrVCStatisticsThis indicates whether statistics are enabled for
this VC. If set to 'useChannelValue(3)', this VC uses
the value specified by adnFrChanStatistics.
Common Name: Statisticsrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.36 |
adnFrVCAccountingThis indicates whether accounting is enabled for this
VC. If it has the value 'useChannelValue(3)', this VC
uses the value specified by adnFrChanAccounting.
Common Name: Accountingrw Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.37 |
adnFrVCUniqueConnIDThis is a unique connection identifier for this VC.
This value is exchanged with the remote FRS (Frame Relay
Subscriber) at call setup time. Both the local and the
remote ends of the VC will report this value in the
accounting record.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.40 |
adnFrVCLastClrCauseRXThis is the most recent clearing cause that was
received from the network for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.42 |
adnFrVCLastClrDiagRXThis is the most recent clearing diagnostic code that
was received from the network for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.43 |
adnFrVCLastClrCauseTXThis is the most recent clearing cause that was
transmitted to the network for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.44 |
adnFrVCLastClrDiagTXThis is the most recent clearing diagnostic code that
was transmitted to the network for this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.45 |
adnFrVCRemoteifindexThis is the ifIndex of the interface on the node
at the remote end of the VC. Together the objects
adnFrVCRemNodeID, ifIndex, adnFrVCRemoteifindex,
frPVCEndptDLCIIndex, adnFrVCRemDlci, and
adnFrVCUniqueConnID uniquely identify VCs for
accounting and statistics purposes.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.46 |
adnFrPVCEndptXmitdSigStatusThe value of this object identifies the PVC
status sent via the local in-channel signaling
procedures for this PVC end-point. If the logical port
is performing only user-side procedures, or if the interface
is inoperative, then this value should be 'none(4)'.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.47 |
adnFrVCInBcThis specifies the committed burst size (Bc) parameter
(measured in bits) for this PVC end-point in the ingress
direction (into the frame relay network). This is a
measure of the exclusively allocated trunk bandwidth
required for the user's committed data.
Common Name: Ingress Trunk Bcro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.48 |
adnFrVCOutBcThis specifies the committed burst size (Bc) parameter
(measured in bits) for this PVC end-point in the egress
direction (out of the frame relay network). This is a
measure of the exclusively allocated trunk bandwidth
required for the user's committed data.
Common Name: Egress Trunk Bcro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.49 |
adnFrVCRemNodeMacNumThe machine number part of adnFrVCRemNodeID, the routing
node ID of the node at the remote endpoint of this frame
relay VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.50 |
adnFrVCRemNodeAreaNumThe area number part of adnFrVCRemNodeID, the routing
node ID of the node at the remote endpoint of this frame
relay VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.51 |
adnFrVCDelaySensitiveThis field indicates whether the VC is delay sensitive.
If either this field or adnFrChanDelaySensitive is set to
'true(1)', then path selection for the VC will be based on
the criterion (delay, monetary cost, hops). Otherwise, path
selection will be based on the criterion
(monetary cost, delay, hops).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.52 |
adnFrVCCosThis indicates the Class of Service (COS) for the PVC.
SVCs and calls received through a TPX Gateway use the
COS defined in adnFrChanDefaultCos.rw AdnFrCos .1.3.6.1.4.1.637.3.1.4.10.44.2.1.53 |
adnFrVCEndptDLCIIndexThis is a duplicate of frPVCEndptDLCIIndex. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.54 |
adnFrVCEndptInMaxFrameSizeThis is a duplicate of frPVCEndptInMaxFrameSize.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.55 |
adnFrVCEndptInBcThis is a duplicate of frPVCEndptInBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.56 |
adnFrVCEndptInBeThis is a duplicate of frPVCEndptInBe.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.57 |
adnFrVCEndptInCIRThis is a duplicate of frPVCEndptInCIR.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.58 |
adnFrVCEndptOutMaxFrameSizeThis is a duplicate of frPVCEndptOutMaxFrameSize.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.59 |
adnFrVCEndptOutBcThis is a duplicate of frPVCEndptOutBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.60 |
adnFrVCEndptOutBeThis is a duplicate of frPVCEndptOutBe.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.61 |
adnFrVCEndptOutCIRThis is a duplicate of frPVCEndptOutCIR.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.62 |
adnFrVCEndptConnectIdentifierThis is a duplicate of frPVCEndptConnectIdentifier.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.63 |
adnFrVCEndptRowStatusThis is a duplicate of frPVCEndptRowStatus.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.64 |
adnFrVCEndptRcvdSigStatusThis is a duplicate of frPVCEndptRcvdSigStatus.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.2.1.65 |
adnFrVCEndptInFramesThis is a duplicate of frPVCEndptInFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.66 |
adnFrVCEndptOutFramesThis is a duplicate of frPVCEndptOutFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.67 |
adnFrVCEndptInDEFramesThis is a duplicate of frPVCEndptInDEFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.68 |
adnFrVCEndptInExcessFramesThis is a duplicate of frPVCEndptInExcessFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.69 |
adnFrVCEndptOutExcessFramesThis is a duplicate of frPVCEndptOutExcessFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.70 |
adnFrVCEndptInDiscardsThis is a duplicate of frPVCEndptInDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.71 |
adnFrVCEndptInOctetsThis is a duplicate of frPVCEndptInOctets.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.72 |
adnFrVCEndptOutOctetsThis is a duplicate of frPVCEndptOutOctets.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.2.1.73 |
adnFrVCBwAllocatedThis is the bandwidth allocated to this VC.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.74 |
adnFrVCDescrA textual string describing this VC.
Common Name: Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.2.1.75 |
adnCMBfvcadnFrVCTableThese are the VC table extensions to the PVC End-Point
table in RFC1604. This table is used for PVCs and SVCs. SEQUENCE OF AdnCMBfvcAdnFrVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.3 |
adnCMBfvcadnFrVCEntryVC table entry. AdnCMBfvcAdnFrVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.3.1 |
adnCMBfvcadnFrVCRemNodeIDThis is a duplicate of adnFrVCRemNodeID.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.3.1.1 |
adnCMBfvcadnFrVCRemNumPlanThis is a duplicate of adnFrVCRemNumPlan.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.2 |
adnCMBfvcadnFrVCRemPhysAddressThis is a duplicate of adnFrVCRemPhysAddress.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.3 |
adnCMBfvcadnFrVCRemDlciThis is a duplicate of adnFrVCRemDlci.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.4 |
adnCMBfvcadnFrVCAdminStateThis is a duplicate of adnFrVCAdminState.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.5 |
adnCMBfvcadnFrVCOperStateThis is a duplicate of adnFrVCOperState.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.6 |
adnCMBfvcadnFrVCTimeThis is a duplicate of adnFrVCTime.ro AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.4.10.44.3.1.7 |
adnCMBfvcadnFrVCInBcsThis is a duplicate of adnFrVCInBcs.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.8 |
adnCMBfvcadnFrVCOutBcsThis is a duplicate of adnFrVCOutBcs.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.9 |
adnCMBfvcadnFrVCUserOrNetThis is a duplicate of adnFrVCUserOrNet.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.10 |
adnCMBfvcadnFrVCLisDiscardThis is a duplicate of adnFrVCLisDiscard.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.11 |
adnCMBfvcadnFrVCRetryAttemptsThis is a duplicate of adnFrVCRetryAttempts.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.12 |
adnCMBfvcadnFrVCFastRetryThis is a duplicate of adnFrVCFastRetry.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.3.1.13 |
adnCMBfvcadnFrVCSlowRetryThis is a duplicate of adnFrVCSlowRetry.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.10.44.3.1.14 |
adnCMBfvcadnFrVCForcedPathThis is a duplicate of adnFrVCForcedPath.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.10.44.3.1.15 |
adnCMBfvcadnFrVCSourceDestThis is a duplicate of adnFrVCSourceDest.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.16 |
adnCMBfvcadnFrVCFrameINThis is a duplicate of adnFrVCFrameIN.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.17 |
adnCMBfvcadnFrVCFrameOUTThis is a duplicate of adnFrVCFrameOUT.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.18 |
adnCMBfvcadnFrVCSubFrameINThis is a duplicate of adnFrVCSubFrameIN.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.19 |
adnCMBfvcadnFrVCSubFrameOUTThis is a duplicate of adnFrVCSubFrameOUT.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.20 |
adnCMBfvcadnFrVCBeInDiscardsThis is a duplicate of adnFrVCBeInDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.21 |
adnCMBfvcadnFrVCBcsInDiscardsThis is a duplicate of adnFrVCBcsInDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.22 |
adnCMBfvcadnFrVCBcInDiscardsThis is a duplicate of adnFrVCBcInDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.23 |
adnCMBfvcadnFrVCBeOutDiscardsThis is a duplicate of adnFrVCBeOutDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.24 |
adnCMBfvcadnFrVCBcsOutDiscardsThis is a duplicate of adnFrVCBcsOutDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.25 |
adnCMBfvcadnFrVCBcOutDiscardsThis is a duplicate of adnFrVCBcOutDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.26 |
adnCMBfvcadnFrVCInCongsStateThis is a duplicate of adnFrVCInCongsState.ro AdnCongestLevels .1.3.6.1.4.1.637.3.1.4.10.44.3.1.27 |
adnCMBfvcadnFrVCDiscardLisInThis is a duplicate of adnFrVCDiscardLisIn.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.28 |
adnCMBfvcadnFrVCNumRelinksThis is a duplicate of adnFrVCNumRelinks.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.29 |
adnCMBfvcadnFrVCNumNodesThis is a duplicate of adnFrVCNumNodes.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.30 |
adnCMBfvcadnFrVCTypeThis is a duplicate of adnFrVCType.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.31 |
adnCMBfvcadnFrVCOutifIndexThis is a duplicate of adnFrVCOutifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.32 |
adnCMBfvcadnFrVCOutDlciThis is a duplicate of adnFrVCOutDlci.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.33 |
adnCMBfvcadnFrVCISRThis is a duplicate of adnFrVCISR.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.34 |
adnCMBfvcadnFrVCAttemptStateThis is a duplicate of adnFrVCAttemptState.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.35 |
adnCMBfvcadnFrVCStatisticsThis is a duplicate of adnFrVCStatistics.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.36 |
adnCMBfvcadnFrVCAccountingThis is a duplicate of adnFrVCAccounting.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.37 |
adnCMBfvcadnFrVCUniqueConnIDThis is a duplicate of adnFrVCUniqueConnID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.40 |
adnCMBfvcadnFrVCLastClrCauseRXThis is a duplicate of adnFrVCLastClrCauseRX.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.42 |
adnCMBfvcadnFrVCLastClrDiagRXThis is a duplicate of adnFrVCLastClrDiagRX.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.43 |
adnCMBfvcadnFrVCLastClrCauseTXThis is a duplicate of adnFrVCLastClrCauseTX.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.44 |
adnCMBfvcadnFrVCLastClrDiagTXThis is a duplicate of adnFrVCLastClrDiagTX.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.45 |
adnCMBfvcadnFrVCRemoteifindexThis is a duplicate of adnFrVCRemoteifindex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.46 |
adnCMBfvcadnFrPVCEndptXmitdSigStatusThis is a duplicate of adnFrPVCEndptXmitdSigStatus.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.47 |
adnCMBfvcadnFrVCInBcThis is a duplicate of adnFrVCInBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.48 |
adnCMBfvcadnFrVCOutBcThis is a duplicate of adnFrVCOutBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.49 |
adnCMBfvcadnFrVCRemNodeMacNumThis is a duplicate of adnFrVCRemNodeMacNum.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.50 |
adnCMBfvcadnFrVCRemNodeAreaNumThis is a duplicate of adnFrVCRemNodeAreaNum.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.51 |
adnCMBfvcfrPVCEndptDLCIIndexThis is a duplicate of frPVCEndptDLCIIndex. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.52 |
adnCMBfvcfrPVCEndptInMaxFrameSizeThis is a duplicate of frPVCEndptInMaxFrameSize.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.53 |
adnCMBfvcfrPVCEndptInBcThis is a duplicate of frPVCEndptInBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.54 |
adnCMBfvcfrPVCEndptInBeThis is a duplicate of frPVCEndptInBe.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.55 |
adnCMBfvcfrPVCEndptInCIRThis is a duplicate of frPVCEndptInCIR.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.56 |
adnCMBfvcfrPVCEndptOutMaxFrameSizeThis is a duplicate of frPVCEndptOutMaxFrameSize.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.57 |
adnCMBfvcfrPVCEndptOutBcThis is a duplicate of frPVCEndptOutBc.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.58 |
adnCMBfvcfrPVCEndptOutBeThis is a duplicate of frPVCEndptOutBe.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.59 |
adnCMBfvcfrPVCEndptOutCIRThis is a duplicate of frPVCEndptOutCIR.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.60 |
adnCMBfvcfrPVCEndptConnectIdentifierThis is a duplicate of frPVCEndptConnectIdentifier.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.61 |
adnCMBfvcfrPVCEndptRowStatusThis is a duplicate of frPVCEndptRowStatus.ro RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.62 |
adnCMBfvcfrPVCEndptRcvdSigStatusThis is a duplicate of frPVCEndptRcvdSigStatus.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.3.1.63 |
adnCMBfvcfrPVCEndptInFramesThis is a duplicate of frPVCEndptInFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.64 |
adnCMBfvcfrPVCEndptOutFramesThis is a duplicate of frPVCEndptOutFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.65 |
adnCMBfvcfrPVCEndptInDEFramesThis is a duplicate of frPVCEndptInDEFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.66 |
adnCMBfvcfrPVCEndptInExcessFramesThis is a duplicate of frPVCEndptInExcessFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.67 |
adnCMBfvcfrPVCEndptOutExcessFramesThis is a duplicate of frPVCEndptOutExcessFrames.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.68 |
adnCMBfvcfrPVCEndptInDiscardsThis is a duplicate of frPVCEndptInDiscards.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.69 |
adnCMBfvcfrPVCEndptInOctetsThis is a duplicate of frPVCEndptInOctets.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.70 |
adnCMBfvcfrPVCEndptOutOctetsThis is a duplicate of frPVCEndptOutOctets.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.3.1.71 |
adnCMBfvcadnFrVCDelaySensitiveThis is a duplicate of adnFrVCDelaySensitive.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.72 |
adnCMBfvcadnFrVCCosThis is a duplicate of adnFrVCCos.ro AdnFrCos .1.3.6.1.4.1.637.3.1.4.10.44.3.1.73 |
adnCMBfvcadnFrVCDescrThis is a duplicate of adnFrVCDescr.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.3.1.74 |
adnFrForceRouteThis table describes the forced path
to be used for this PVC. SEQUENCE OF AdnFrForceEntry .1.3.6.1.4.1.637.3.1.4.10.44.4 |
adnFrForceEntryThis is one entry of the Forced Path table for the specified
PVC. AdnFrForceEntry .1.3.6.1.4.1.637.3.1.4.10.44.4.1 |
adnFrForceHopThis is the hop indicator. The value is '1' in the
source node and increments for each hop through the
network.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.4.1.1 |
adnFrForceNodeThis is the routing node ID of the next node in this
forced path. It is required for every entry
in the Forced Path table.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.4.1.2 |
adnFrForceFlagThis flag indicates if this is the preferred or
required path. If this flag is set to 'preferred(1)',
and the interface designated by adnFrForceOutifindex
is not available, then alternate interfaces are tried.
If this is set to 'required(2)', and the designated
interface is not available, then no additional
interfaces are attempted and the call is cleared.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.4.1.3 |
adnFrForceOutifindexThis specifies the ifIndex of the interface that the
call should use when exiting this node. If adnFrForceFlag
has the value 'required(2)', then this interface MUST be
used. If adnFrForceFlag is set to 'preferred(1), an
alternate interface can be used to get to the next node
identified by adnFrForceNode if this interface is
unavailable.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.4.1.4 |
adnFrFrcNodeMacNumThe machine number part of the adnFrForceNode, the routing
node ID of the next node in this forced path.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.4.1.5 |
adnFrFrcNodeAreaNumThe area number part of the adnFrForceNode, the routing
node ID of the next node in this forced path.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.4.1.6 |
adnFrAccountVCTableThis is the Accounting MIB table. These are the
counters that are reported in the FRS
(Frame Relay Subscriber) accounting record. SEQUENCE OF AdnFrAccountVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.5 |
adnFrAccountVCEntryOne instance of the FRS (Frame Relay Subscriber) accounting
counters. AdnFrAccountVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.5.1 |
adnFrAccountTariffThis indicates the tariff period for these counters.
A tariff period is a designated time period during
which specified billing rates applyro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.5.1.1 |
adnFrAccountInSegmentsThis indicates the number of ingress sub-frames in this
reporting period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.2 |
adnFrAccountOutSegmentsThis indicates the number of egress sub-frames in this
reporting period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.3 |
adnFrAccountInFramesThis indicates the number of ingress frames in this
reporting period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.4 |
adnFrAccountOutFramesThis indicates the number of egress frames in this reporting
period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.5 |
adnFrAccountInExcessFramesThis indicates the number of ingress excess frames in this
reporting period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.6 |
adnFrAccountOutExcessFramesThis indicates the number of egress excess frames in
this reporting period for this VC.ro Counter .1.3.6.1.4.1.637.3.1.4.10.44.5.1.7 |
adnFrAccVCTableThis table constitutes the FRS (Frame Relay Subscriber)
accounting record. None of the objects in this table
can be obtained via an SNMP GET command. These objects
are visible only in an accounting record. Most of these
objects duplicate objects in other tables. They are
collected here to allow the accounting record to be sent
as a single table to conserve space. SEQUENCE OF AdnFrAccVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.6 |
adnFrAccVCEntryOne instance of the FRS (Frame Relay Subscriber) accounting
record. AdnFrAccVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.6.1 |
adnFrAccVCifNameThis is a duplicate of ifName for use in the
accounting record. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.1 |
adnFrAccVCfrPVCEndptDLCIIndexThis is a duplicate of frPVCEndptDLCIIndex. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.2 |
adnFrAccVCadnFrVCRemDlciThis is a duplicate of adnFrVCRemDlci. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.3 |
adnFrAccVCadnFrVCUniqueConnIDThis is a duplicate of adnFrVCUniqueConnID. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.4 |
adnFrAccVCadnFrVCRemNodeIDThis is a duplicate of adnFrVCRemNodeID. AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.6.1.5 |
adnFrAccVCfrLportNumPlanThis is a duplicate of frLportNumPlan. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.6 |
adnFrAccVCifPhysAddressThis is a duplicate of ifPhysAddress. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.7 |
adnFrAccVCadnFrVCRemNumPlanThis is a duplicate of adnFrVCRemNumPlan. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.8 |
adnFrAccVCadnFrVCRemPhysAddressThis is a duplicate of adnFrVCRemPhysAddress.
This object is deprecated in favor of
adnFrAccVCSVCCalledPartyNum.deprecated PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.9 |
adnFrAccVCadnFrVCSourceDestThis is a duplicate of adnFrVCSourceDest. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.10 |
adnFrAccVCadnFrVCNumRelinksThis is a duplicate of adnFrVCNumRelinks. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.11 |
adnFrAccVCfrPVCEndptInCIRThis is a duplicate of frPVCEndptInCIR. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.12 |
adnFrAccVCadnFrVCInBcThis is a duplicate of adnFrVCInBc. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.13 |
adnFrAccVCadnFrVCInBcsThis is a duplicate of adnFrVCInBcs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.14 |
adnFrAccVCfrPVCEndptInBeThis is a duplicate of frPVCEndptInBe. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.15 |
adnFrAccVCfrPVCEndptOutCIRThis is a duplicate of frPVCEndptOutCIR. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.16 |
adnFrAccVCadnFrVCOutBcThis is a duplicate of adnFrVCOutBc. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.17 |
adnFrAccVCadnFrVCOutBcsThis is a duplicate of adnFrVCOutBcs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.18 |
adnFrAccVCfrPVCEndptOutBeThis is a duplicate of frPVCEndptOutBe. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.19 |
adnFrAccVCadnFrVCUserOrNetThis is a duplicate of adnFrVCUserOrNet. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.20 |
adnFrAccVCfrAccountPVCSegmentSizeThis is a duplicate of frAccountPVCSegmentSize. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.21 |
adnFrAccVCadnFrVCTypeThis is a duplicate of adnFrVCType. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.22 |
adnFrAccVCTimeEndAcctThis indicates the time this accounting record was
generated for this VC. Since an accounting record has
this time and the previous time
(adnFrAccVCTimeStartAcct), the NMS can determine the
length of time an accounting record spans. The time
given in coordinated universal time (UTC). AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.4.10.44.6.1.23 |
adnFrAccVCTimeStartAcctThis indicates the time the previous accounting record
was sent for this VC. Since an accounting record has
this time and the current time (adnFrAccVCTimeEndAcct),
the NMS can determine the length of time an accounting
record spans. The time is given in coordinated universal
time (UTC). AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.4.10.44.6.1.24 |
adnFrAccVCCallTermThis field is placed into the accounting record to
indicate if the call has been terminated or not.
For a PVC - CallTerminated = PVC has been deleted
CallNotTerminated = PVC has not been deleted
For a SVC - CallTerminated = call has been cleared
CallNotTerminated = call has not been cleared. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.25 |
adnFrAccVCadnFrChanLineTypeThis is a duplicate of adnFrChanLineType. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.6.1.26 |
adnFrAccVCadnFrVCNumNodesThis is a duplicate of adnFrVCNumNodes. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.27 |
adnFrAccVCTableInSegmentsThis contains the ingress segment count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.28 |
adnFrAccVCTableInFramesThis contains the ingress frame count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.29 |
adnFrAccVCTableInExcessFrameThis contains the ingress excess frames count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.30 |
adnFrAccVCTableOutSegmentsThis contains the egress segment count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.31 |
adnFrAccVCTableOutFramesThis contains the egress frame count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.32 |
adnFrAccVCTableOutExcessFrameThis contains the egress excess frames count for this
reporting period. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.33 |
adnFrAccVCPVCRegroomedThis field indicates if the PVC has been regroomed
during the current accounting period. This field is
initialized as false(2) and is set to
true(1) when the PVC is regroomed. After the
accounting period has ended and the accounting record
has been collected by the NMS, the field is set to
false(2). TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.34 |
adnFrAccVCSVCCallingPartyNumThis is the calling party number. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.35 |
adnFrAccVCSVCCalledPartyNumThis is the number of the party called. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.36 |
adnFrAccVCSVCCallEstablishedThis indicates whether a call was established. TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.37 |
adnFrAccVCSVCQ933ClearingCauseThis is the clearing cause for the SVC INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.38 |
adnFrAccVCSVCQ933ClearingLocationThis is the clearing location. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.39 |
adnFrAccVCCosThis indicates the Class of Service (COS) for the VC. AdnFrCos .1.3.6.1.4.1.637.3.1.4.10.44.6.1.40 |
adnFrAccVCadnFrVCLocalNodeIDThis is the node ID for this VC. It is a duplicate
of adnNodeRoutingID in the adnNodeTable.
Common Name: Local Node ID AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.6.1.41 |
adnFrAccVCadnFrVCDescrThis is a duplicate of adnFrVCDescr for use in the
accounting record.
Common Name: Description DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.42 |
adnFrAccVCadnFrVCLocalifIndexThis is ifIndex for the VC. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.43 |
adnFrAccVCadnFrVCRemoteifIndexThis is a duplicate of adnFrVCRemoteifindex INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.44 |
adnFrAccVCadnFrVCEndptInDiscardsThis is a duplicate of adnFrVCEndptInDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.6.1.45 |
adnFrAccVCifSpeedThis is a duplicate of ifSpeed. Gauge .1.3.6.1.4.1.637.3.1.4.10.44.6.1.46 |
adnFrAccVCadnNodeTimeThis is a duplicate of adnNodeTime. GMT (Greenwich
Mean Time) when the accounting records are generated. AdnNodeTimeTicks .1.3.6.1.4.1.637.3.1.4.10.44.6.1.47 |
adnFrStatVCTableThis table constitutes the FRS (Frame Relay Subscriber)
connection-level statistics record. None of the objects
in this table can ever be obtained via an SNMP GET
command. These objects are only visible in a statistics
record. Most of these objects duplicate objects in other
tables. They are collected here to allow the statistics
record to be sent as a single table to conserve space. SEQUENCE OF AdnFrStatVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.7 |
adnFrStatVCEntryOne instance of the FRS (Frame Relay Service) connection
statistics record AdnFrStatVCEntry .1.3.6.1.4.1.637.3.1.4.10.44.7.1 |
adnFrStatVCifNameThis is a duplicate of ifName for use in the
connection-level statistics record. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.1 |
adnFrStatVCadnFrVCRemoteifindexThis is a duplicate of adnFrVCRemoteifindex. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.2 |
adnFrStatVCadnFrVCRemDlciThis is a duplicate of adnFrVCRemDlci. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.3 |
adnFrStatVCadnFrVCUniqueConnIDThis is a duplicate of adnFrVCUniqueConnID. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.4 |
adnFrStatVCadnFrVCRemNodeIDThis is a duplicate of adnFrVCRemNodeID. AdnRoutingID .1.3.6.1.4.1.637.3.1.4.10.44.7.1.5 |
adnFrStatVCfrLportNumPlanThis is a duplicate of frLportNumPlan. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.6 |
adnFrStatVCifPhysAddressThis is a duplicate of ifPhysAddress. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.7 |
adnFrStatVCadnFrVCRemNumPlanThis is a duplicate of adnFrVCRemNumPlan. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.8 |
adnFrStatVCadnFrVCRemPhysAddressThis is a duplicate of adnFrVCRemPhysAddress. PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.9 |
adnFrStatVCadnFrVCSourceDestThis is a duplicate of adnFrVCSourceDest. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.10 |
adnFrStatVCadnFrVCNumRelinksThis is a duplicate of adnFrVCNumRelinks. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.11 |
adnFrStatVCfrPVCEndptInCIRThis is a duplicate of frPVCEndptInCIR. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.12 |
adnFrStatVCadnFrVCInBcThis is a duplicate of adnFrVCInBc. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.13 |
adnFrStatVCadnFrVCInBcsThis is a duplicate of adnFrVCInBcs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.14 |
adnFrStatVCfrPVCEndptInBeThis is a duplicate of frPVCEndptInBe. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.15 |
adnFrStatVCfrPVCEndptOutCIRThis is a duplicate of frPVCEndptOutCIR. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.16 |
adnFrStatVCadnFrVCOutBcThis is a duplicate of adnFrVCOutBc. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.17 |
adnFrStatVCadnFrVCOutBcsThis is a duplicate of adnFrVCOutBcs. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.18 |
adnFrStatVCfrPVCEndptOutBeThis is a duplicate of frPVCEndptOutBe. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.19 |
adnFrStatVCadnFrVCISRThis is a duplicate of adnFrVCISR. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.20 |
adnFrStatVCadnFrVCUserOrNetThis is a duplicate of adnFrVCUserOrNet. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.21 |
adnFrStatVCfrAccountPVCSegmentSizeThis is a duplicate of frAccountPVCSegmentSize. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.22 |
adnFrStatVCadnFrVCTypeThis is a duplicate of adnFrVCType. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.23 |
adnFrStatVCadnNodeTimeThis is a duplicate of adnNodeTime. AdnNodeTimeTicks .1.3.6.1.4.1.637.3.1.4.10.44.7.1.24 |
adnFrStatVCadnFrVCAdminStateThis is a duplicate of adnFrVCAdminState. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.25 |
adnFrStatVCadnFrVCOperStateThis is a duplicate of adnFrVCOperState. Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.7.1.26 |
adnFrStatVCadnFrVCFrameINThis is a duplicate of adnFrVCFrameIN. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.27 |
adnFrStatVCadnFrVCFrameOUTThis is a duplicate of adnFrVCFrameOUT. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.28 |
adnFrStatVCadnFrVCSubFrameINThis is a duplicate of adnFrVCSubFrameIN. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.29 |
adnFrStatVCadnFrVCSubFrameOUTThis is a duplicate of adnFrVCSubFrameOUT. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.30 |
adnFrStatVCadnFrVCBeInDiscardsThis is a duplicate of adnFrVCBeInDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.31 |
adnFrStatVCadnFrVCBcsInDiscardsThis is a duplicate of adnFrVCBcsInDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.32 |
adnFrStatVCadnFrVCBcInDiscardsThis is a duplicate of adnFrVCBcInDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.33 |
adnFrStatVCadnFrVCBeOutDiscardsThis is a duplicate of adnFrVCBeOutDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.34 |
adnFrStatVCadnFrVCBcsOutDiscardsThis is a duplicate of adnFrVCBcsOutDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.35 |
adnFrStatVCadnFrVCBcOutDiscardsThis is a duplicate of adnFrVCBcOutDiscards. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.36 |
adnFrStatVCadnFrVCDiscardLisInThis is a duplicate of adnFrVCDiscardLisIn. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.37 |
adnFrStatVCadnFrVCInCongsStateThis is a duplicate of adnFrVCInCongsState. AdnCongestLevels .1.3.6.1.4.1.637.3.1.4.10.44.7.1.38 |
adnFrStatVCfrPVCEndptDLCIIndexThis is a duplicate of frPVCEndptDLCIIndex. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.39 |
adnFrStatVCadnFrVCNumNodesThis is a duplicate of adnFrVCNumNodes. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.40 |
adnFrStatVCfrPVCEndptInOctetsThis is a duplicate of frPVCEndPtInOCtets INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.41 |
adnFrStatVCfrPVCEndptOutOctetsThis is a duplicate of frPVCEndPtOutOctets INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.42 |
adnFrStatVCadnFrVCDescrThis is a duplicate of adnFrVCDescr. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.7.1.43 |
adnFrReachAddrTableThis table contains the list of complete addresses
and/or address prefixes configured for this access
interface (port/channel) if the Multiple
Subscriber Number (MSN) service is used. SEQUENCE OF AdnFrReachAddrEntry .1.3.6.1.4.1.637.3.1.4.10.44.8 |
adnFrReachAddrEntryAn entry in the adnFrReachAddrTable. There is one entry
for each element of the list. AdnFrReachAddrEntry .1.3.6.1.4.1.637.3.1.4.10.44.8.1 |
adnFrReachAddrIndexThe index of an element in the list. INTEGER .1.3.6.1.4.1.637.3.1.4.10.44.8.1.1 |
adnFrReachAddrNumPlanThe numbering plan of the complete address or
address prefix specified in adnFrReachAddrNumber.
Common Names: Numbering Plan, Num Plan.ro Enumeration .1.3.6.1.4.1.637.3.1.4.10.44.8.1.2 |
adnFrReachAddrNumberLengthThe number of digits of the prefix address specified in
adnFrReachAddrNumber.ro INTEGER .1.3.6.1.4.1.637.3.1.4.10.44.8.1.3 |
adnFrReachAddrNumberThe complete address or address prefix of a location
reachable through this access interface (port/channel).ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.10.44.8.1.4 |
adnFrCosTableThis table contains the Class Of Service (COS)
information at the channel level for FRS
(Frame Relay Service). SEQUENCE OF AdnFrCosEntry .1.3.6.1.4.1.637.3.1.4.10.44.9 |
adnFrCosEntryAn entry in the table. There will be
one entry for each FRS (Frame Relay Service)
channel configured. AdnFrCosEntry .1.3.6.1.4.1.637.3.1.4.10.44.9.1 |
adnFrCosIndexThe Cos (Class Of Service) index for
a specific class of service managed
by this frame relay interface.ro AdnFrCos .1.3.6.1.4.1.637.3.1.4.10.44.9.1.1 |
adnFrCosAdminStatusThis object provides a mechanism for controlling
the status of Class of Service (COS). Set to 'locked(2)'
it will cause any new calls to this Class of Service
be rejected. Set to 'unlocked(1)' it will cause resumption
of the normal operation.rw AdnFrCosAdminStatus .1.3.6.1.4.1.637.3.1.4.10.44.9.1.2 |
adnFrCosOperStatusThis object indicates the operational status
of Class of Service (COS). A value of 'locked(2)'
indicates that any new calls will be rejected
for this Class of Service (COS). A value of
'unlocked(1)' indicates normal operation.ro AdnFrCosOperStatus .1.3.6.1.4.1.637.3.1.4.10.44.9.1.3 |
adnIfMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31 |
adnIfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.1 |
adnIfTestTableThe ADN Interface Test Table. SEQUENCE OF AdnIfTestEntry .1.3.6.1.4.1.637.3.1.4.31.1.3 |
adnIfTestEntryLoop test control and results values for an interface. AdnIfTestEntry .1.3.6.1.4.1.637.3.1.4.31.1.3.1 |
adnIfTestTimeLimitThe time, in hundredths of a second, that the test
will run before automatically being terminated.
Common name: Time Limitrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.31.1.3.1.1 |
adnIfTestFailLevelThreshold for the allowable bit error rate, expressed
as one in ten-to-the-power-X, where X is the value of
this parameter. For example, the default value of six
means that a bit error rate of more than 1 in
1,000,000 is considered failure.
This parameter is only used when the HSS sets ifTestResult
to success or failed at the end of a test.
Common name: Fail Levelrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.31.1.3.1.2 |
adnIfTestBitsSentHiThe most significant 32 bits of the 64-bit internal
counter of the number of test bits sent. See also
adnIfTestBitsSentLo.
Common name: Test Bits Sent High #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.3 |
adnIfTestBitsSentLoThe least significant 32 bits of the 64-bit internal
counter of the number of test bits sent. See also
adnIfTestBitsSentHi.
Common name: Test Bits Sent Low #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.4 |
adnIfTestBitsReceivedHiThe most significant 32 bits of the 64-bit internal
counter of the number of test bits received. See also
adnIfTestBitsReceivedLo.
Common name: Test Bits Received High #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.5 |
adnIfTestBitsReceivedLoThe least significant 32 bits of the 64-bit internal
counter of the number of test bits received. See also
adnIfTestBitsReceivedHi.
Common name: Test Bits Received Low #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.6 |
adnIfTestBitsErroredHiThe most significant 32 bits of the 64-bit internal
counter of the number of test bits received that did
not match the bits that were sent (i.e., number of
bits in error). See also adnIfTestBitsErroredLo.
Common name: Test Bits Errored High #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.7 |
adnIfTestBitsErroredLoThe least significant 32 bits of the 64-bit internal
counter of the number of test bits received that did
not match the bits that were sent (i.e., number of
bits in error). See also adnIfTestBitsErroredHi.
Common name: Test Bits Errored Low #ro Counter .1.3.6.1.4.1.637.3.1.4.31.1.3.1.8 |
adnIfTestStartTimeThe value of sysUpTime, in hundredths of a second,
when the test started.
Common name: Start Timero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.31.1.3.1.9 |
adnIfTestStopTimeThe value of sysUpTime, in hundredths of a second,
when the test stopped, or the current time if a test
is in progress.
Common name: Stop Timero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.31.1.3.1.10 |
adnIfTestType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3 |
adnIfTestTypeOther OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.1 |
adnIfTestTypeNone OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.2 |
adnIfTestTypeData OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.3 |
adnIfTestTypeManualV54 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.4 |
adnIfTestTypeRemoteV54 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.5 |
adnIfTestTypeLocalV54 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.6 |
adnIfTestTypeApplique OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.7 |
adnIfTestTypePriApplBus OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.8 |
adnIfTestTypeRedApplBus OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.9 |
adnIfTestTypeIntCoupler OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.10 |
adnIfTestTypeLineLoop OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.11 |
adnIfTestTypePayloadLoop OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.12 |
adnIfTestTypeLineHW OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.31.3.13 |
adnAtmMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.37 |
adnAtmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.4.37.1 |
adnAtmLogLineTableThis table describes the logical line supporting the
logical inter-node ATM interfaces. SEQUENCE OF AdnAtmLogLineEntry .1.3.6.1.4.1.637.3.1.4.37.1.1 |
adnAtmLogLineEntryAn entry in the adnAtmLogLineTable. There is one entry for
each logical line. AdnAtmLogLineEntry .1.3.6.1.4.1.637.3.1.4.37.1.1.1 |
adnAtmLogLineVuniIfIndexThe ifIndex of the Virtual-User Network Interface (V-UNI)
associated with this logical line.
Common Name: V-UNI ifIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.1.1.1 |
adnAtmLogLineVuniVpiThe Virtual Path Identifier (VPI) on the Virtual-User
Network Interface (V-UNI) associated with this logical
line. This VPI is unique to this logical line and is used
as the logical line number.
Common Name: Logical Linero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.1.1.2 |
adnAtmInterfaceConfTableThis table is the extension of the atmInterfaceConfTable
table, described in RFC 1695. This table contains
proprietary ATM interface configuration parameters, one
entry per ATM interface. SEQUENCE OF AdnAtmInterfaceConfEntry .1.3.6.1.4.1.637.3.1.4.37.1.2 |
adnAtmInterfaceConfEntryAn entry in the adnAtmInterfaceConfTable. There is one
entry for each ATM interface. AdnAtmInterfaceConfEntry .1.3.6.1.4.1.637.3.1.4.37.1.2.1 |
adnAtmInterfaceLowLayerIfIndexThe ifIndex of the logical or physical line supporting this
ATM interface. The line is considered to be the lower layer
of the ATM interface.
Common Name: Lower Layer Interface Indexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.2.1.1 |
adnAtmInterfaceTypeThe type of ATM interface:
- 'externalUni': On an High Speed Coupler (HSC) line
- 'nni': On a HSC line, connected to a Virtual Path (VP)
switched network
- 'internalUniSig': On a Cell Interconnection Gateway
(CIG) internal line used for special connections such as
routing, signalling and ILMI
- 'virtualUni': Logical interface supporting the Virtual
Path Connection (VPC) used to support the logical Cell
alcatel Network protocol Interfaces (CNIs)
- 'physicalCni': Inter-node physical interface (on a HSC
line)
- 'routlogicalCni': Routable logical CNI, supported by a
logical line (inter-node VPC)
- 'nonroutlogicalCni': Non-routable logical CNI, known only
by path select
- 'nonroutlogicalCniendtoend': Non-routable logical CNI;
end-to-end identical to previous one but disallowed for
transit Virtual Channel Connections (VCCs)
- 'internalUni': On a board internal line (e.g. Circuit
Emulation Service (CES) board).
- 'tdpAccess': Tag Distribution Protocol (TDP) capable
access. It can be a regular Tag Edge Router (TER) or a
Tag Switch Controller (TSC). It is supported by an ATM
logical line
- 'tdpTrunk': TDP capable trunk. It is supported by an ATM
logical line.
Common Name: Interface Typero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.2 |
adnAtmInterfaceMaxFillingRateThe maximum filling rate on this ATM interface. This value
is the percentage of data that can be loaded on the line.
For example, if the ifspeed is 100000 Mbits and the maximum
filling rate is 80%, the total bandwidth allowed on the
line is 80000 Mbits. When the maximum filling rate is
reached, no more calls are accepted on the ATM interface.
Common Name: Filling Rate (%)ro INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.2.1.3 |
adnAtmInterfaceBWThreshold1The ATM interface's higher bandwidth threshold, used for
path selection on the Cell alcatel Network protocol
Interface (CNI) to calculate actual available bandwidth.
The value, expressed as a percentage, is significant only
if this is a CNI; otherwise, it is 0.
Common Name: Higher Bandwidth Thresholdrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.2.1.4 |
adnAtmInterfaceBWThreshold2The ATM interface's medium bandwidth threshold, used for
path selection on the Cell alcatel Network protocol
Interface (CNI) to calculate actual available bandwidth.
The value, expressed as a percentage, is significant only
if this is a CNI; otherwise, it is 0.
Common Name: Medium Bandwidth Thresholdrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.2.1.5 |
adnAtmInterfaceBWThreshold3The ATM interface's lower bandwidth threshold, used for
path selection on the Cell alcatel Network protocol
Interface (CNI) to calculate actual available bandwidth.
The value, expressed as a percentage, is significant only
if this is a CNI; otherwise, it is 0.
Common Name: Lower Bandwidth Thresholdrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.2.1.6 |
adnAtmInterfaceMaxPtpVcsThe maximum number of point-to-point Virtual Connections
(VCs) (Virtual Path Connections (VPCs) and Virtual Channel
Connections (VCCs)) on this ATM interface.
Common Name: Max Point-to-Point Virtual Connectionsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.7 |
adnAtmInterfaceMaxPtMCcThe maximum number of point-to-multipoint cross-connections
on this ATM interface.
Common Name: Max Point-to-Multipoint Cross Connectionsrodeprecated INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.8 |
adnAtmInterfaceMaxPvccThe maximum number of permanent Virtual Channel Connections
(VCCs) on this ATM interface.
Common Names: Max Permanent VCCs,
Max P-VCCsrodeprecated INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.9 |
adnAtmInterfaceMaxSvccThe maximum number of switched Virtual Channel Connections
(VCCs) on this ATM interface.
Common Names: Max Switched VCCs,
Max S-VCCsrodeprecated INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.10 |
adnAtmInterfaceVccLowVpiThe low value of the Virtual Path Identifier (VPI) range
dedicated to Virtual Channel (VC) switching on this ATM
interface.
Common Name: Low VPI Valuero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.11 |
adnAtmInterfaceVccHighVpiThe high value of the Virtual Path Identifier (VPI) range
dedicated to Virtual Channel (VC) switching on this ATM
interface.
Common Name: High VPI Valuero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.12 |
adnAtmInterfaceMaxPVpcsThe maximum number of permanent Virtual Path Connections
(VPCs) on this ATM interface.
Common Names: Max Permanent VPCs,
Max P-VPCsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.13 |
adnAtmInterfacePvpcLowVpiThe low value of the Virtual Path Identifier (VPI) range
dedicated to permanent Virtual Path Connections (VPCs) on
this ATM interface.
Common Name: Low VPI Value (P-VPCs)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.14 |
adnAtmInterfacePvpcHighVpiThe high value of the Virtual Path Identifier (VPI) range
dedicated to permanent Virtual Path Connections (VPCs) on
this ATM interface.
Common Name: High VPI Value (P-VPCs)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.15 |
adnAtmInterfaceMaxSVpcsThe maximum number of switched Virtual Path Connections
(VPCs) on this ATM interface.
Common Names: Max Switched VPCs,
Max S-VPCsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.16 |
adnAtmInterfaceSvpcAllocOrdThe Virtual Path Identifier (VPI) allocation order for
switched Virtual Path Connections (VPCs) on this ATM
interface.
Common Name: VPI Allocation Order (S-VPCs)ro AdnAtmAllocOrder .1.3.6.1.4.1.637.3.1.4.37.1.2.1.17 |
adnAtmInterfaceSvpcLowVpiThe low value of the Virtual Path Identifier (VPI) range
dedicated to switched Virtual Path Connections (VPCs) on
this ATM interface.
Common Name: Low VPI Value (S-VPCs)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.18 |
adnAtmInterfaceSvpcHighVpiThe high value of the Virtual Path Identifier (VPI) range
dedicated to switched Virtual Path Connections (VPCs) on
this ATM interface.
Common Name: High VPI Value (S-VPCs)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.19 |
adnAtmInterfaceMaxActiveVpVpiBitsThe maximum number of active Virtual Path Identifier
(VPI) bits configured for use on this ATM interface, in
Virtual Path (VP) switch mode.
The not significant value is 0.
Common Name: Max VPI Bits for VPCsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.20 |
adnAtmInterfaceMaxActiveVcVpiBitsThe maximum number of active Virtual Path Identifier
(VPI) bits configured for use on this ATM interface, in
Virtual Channel (VC) switch mode.
The not significant value is 0.
Common Name: Max VPI Bits for VCCsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.21 |
adnAtmInterfaceChargingWhether charging is enabled for all Switched Virtual
Connections (SVCs) (switched Virtual Path Connections
(VPCs) and Virtual Channel Connections (VCCs)) and the
default value for the Permanent Virtual Connections (PVCs)
supported by this ATM interface.
For the PVCs (VPCs and VCCs) the charging status could be
defined per cross-connection.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.22 |
adnAtmInterfaceStatisticsWhether statistics are enabled for all Switched Virtual
Connections (SVCs) (switched Virtual Path Connections
(VPCs) and Virtual Channel Connections (VCCs)) and the
default value for the Permanent Virtual Connections (PVCs)
supported by this ATM interface.
For the PVCs (VPCs and VCCs) the statistics status could be
defined per cross-connection.
Common Name: Statisticsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.23 |
adnAtmInterfaceTrapsWhether traps are reported to the NMS for this interface.
Traps can be reported at ATM interface level, virtual
connection level, Signalling ATM Adaptation Layer (SAAL)
level and signalling level.
Common Name: Trapsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.24 |
adnAtmInterfaceUserNetFlgWhether the interface follows the user or network side of
the protocol recommendations.
Common Names: User or Network Side,
User/Networkrodeprecated Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.25 |
adnAtmInterfaceSigTypeThe type of signalling used for the interface:
The following three types are allowed for non Tag
Distribution Protocol (TDP) interfaces:
- 'nonAssociated': An unique signalling Virtual Channel
Connection (VCC) is used to control the Virtual Path
Connections (VPCs) and VCCs for the interface
- 'associated': Several signalling VCCs used. One controls
the interface VPCs. There is also a signalling VCC for
each Virtual Path Identifier (VPI) value dedicated to
Virtual Channel (VC) switching which controls the VCC
having the VPI value
- 'noSignalling': No signalling VCC used.
The following two types are allowed for TDP interfaces
only:
- 'ipTdp': An unique signalling VCC is used to control
the VCCs for the interface.
- 'ipTdpCvsi': In addition to a signalling VCC used to
control the VCCs for the interface, there is an extra VCC
carrying Cisco Virtual Switch Interface (CVSI) messages
between the High Speed System (HSS) and the connected
'tdpAccess' acting as a Tag Switch Controller (TSC).
Common Name: Signal Typero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.26 |
adnAtmInterfaceRemRoutingNodeIDThe remote node identifier. This is significant only if
this is a Cell alcatel Network protocol Interface (CNI).ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.2.1.27 |
adnAtmInterfaceRemIfIndexThe ifIndex of the remote ATM interface. This is
significant only if this is a Cell alcatel Network protocol
Interface (CNI).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.2.1.28 |
adnAtmInterfaceCniBlockingStatusThe blocking status of the Cell alcatel Network protocol
Interface (CNI):
- 'available': The CNI can be used to establish new Virtual
Path Connections (VPCs) or Virtual Channel Connections
(VCCs)
- 'blocked': The CNI is not used for establishing new VPCs
or VCCs
- 'notSignificant': For all ATM interface types except
'physicalCni' and 'routlogicalCni'.
Common Name: Blocking Statusro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.29 |
adnAtmInterfaceMaxVcsThe maximum number of Virtual Connections (VCs) (Virtual
Path Connections (VPCs) and Virtual Channel Connections
(VCCs) on this ATM interface.
Common Name: Max Virtual Connectionsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.30 |
adnAtmInterfaceMaxPtmRootVcsThe maximum number of point-to-multipoint root Virtual
Connections (VCs) on this ATM interface.
Common Name: Max Point-to-Multipoint Root Virtual
Connectionsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.31 |
adnAtmInterfaceMaxPtmLeafVcsThe maximum number of point-to-multipoint leaf Virtual
Connections (VCs) on this ATM interface.
Common Name: Max Point-to-Multipoint Leaf Virtual
Connectionsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.32 |
adnAtmInterfaceMaxVpiForVccsThe maximum number of Virtual Path Identifier (VPI)
dedicated to Virtual Channel Connections (VCCs) on this ATM
interface.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.33 |
adnAtmInterfaceCacAlgorithmWhether Connection Admission Control (CAC) algorithm is
enabled on this interface.
This nominator doesn't have any impact on the CAC algorithm
applied on the AEI associated to this interface.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.34 |
adnAtmInterfaceKThe Connection Admission Control (CAC) overbooking factor,
expressed as a percentage, on the ATM interface.ro INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.2.1.35 |
adnAtmInterfaceKUbrThe Connection Admission Control (CAC) overbooking factor,
expressed as a percentage, for Unspecified Bit Rate (UBR)
connections.ro AdnPercent .1.3.6.1.4.1.637.3.1.4.37.1.2.1.36 |
adnAtmInterfaceUbr1TaggingWhether the switch accepts to treat the Switched Virtual
Connections (SVCs) Unspecified Bit Rate (UBR) with no
tagging (ubr.1) (specified in the Setup message received)
as an UBR connection with tagging (ubr.2).
The non significant value is 'disabled'.rwdeprecated AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.37 |
adnAtmInterfacePolicingThe status of the policing function applied, in the
receiving direction, for all Switched Virtual Connections
(SVCs) (switched Virtual Path Connections (VPCs) and
Virtual Channel Connections (VCCs)) and the default value
for the Permanent Virtual Connections (PVCs) supported by
this ATM interface:
- 'notPoliced': Police disabled
- 'policed': Police enabled
- 'supervision': Police disabled, but the police counters
are updated.
For the PVCs (VPCs and VCCs) the policing function could be
defined per cross-connection.
Common Name: Policingro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.38 |
adnAtmInterfaceMonetaryCostThe monetary cost associated to this ATM interface.
This object is significant only if the interface type is a
routable Cell alcatel Network protocol Interface (CNI).ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.2.1.39 |
adnAtmInterfaceTransitDelayThe transit delay configured for this ATM interface.
This object is significant only if the interface type is a
routable Cell alcatel Network protocol Interface (CNI).ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.2.1.40 |
adnAtmInterfaceMaxTDSensitiveThe maximum allowed transit delay for all delay sensitive
Switched Virtual Connections (SVCs) (switched Virtual Path
Connections (VPCs) and Virtual Channel Connections (VCCs))
and the default value for the Permanent Virtual Connections
(PVCs) supported by this ATM interface.
The delay sensitivity of a connection is deduced from the
ATM Transfer Capability (ATC) of the link, specified by
adnAtmVplTransferCapability and adnAtmVclTransferCapability.
For the PVCs (VPCs and VCCs) the maximum allowed transit
delay could be defined per connection.
This object is significant only if the interface type is
not a Cell alcatel Network protocol Interface (CNI).ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.2.1.41 |
adnAtmInterfaceMaxTDOtherThe maximum allowed transit delay for all no delay
sensitive Switched Virtual Connections (SVCs) (switched
Virtual Path Connections (VPCs) and Virtual Channel
Connections (VCCs)) and the default value for the Permanent
Virtual Connections (PVCs) supported by this ATM interface.
The delay sensitivity of a connection is deduced from the
ATM Transfer Capability (ATC) of the link, specified by
adnAtmVplTransferCapability and adnAtmVclTransferCapability.
For the PVCs (VPCs and VCCs) the maximum allowed transit
could be defined per connection.
This object is significant only if the interface type is
not a Cell alcatel Network protocol Interface (CNI).ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.2.1.42 |
adnAtmInterfaceChargingBehaviourThis object indicates the behaviour of the switch when the
charging tickets could not be generated for the Virtual
Connections (VCs) (Virtual Path Connections (VPCs) and
Virtual Channel Connections (VCCs)) supported by this ATM
interface:
- 'acceptCalls': The new calls are accepted and the
established connections are not released
- 'refuseCalls': The new calls are refused and the
established connections are not released
- 'refuseAndReleaseCalls': The new calls are refused and
the established connections are released.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.43 |
adnAtmInterfaceAddrRegistrationWhether the address registration procedure is enabled.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.2.1.44 |
adnAtmInterfaceSvcCdvTolValue of the Cell Delay Variation Tolerance (CDVTOL) for
Switched Virtual Connections (SVCs).
Value 0 means that the CDVTOL is chosen internally by the
switch.
Common Names: SVC CDV Tolerance.ro INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.1.2.1.45 |
adnAtmInterfaceVpiForVccAllocOrdThe allocation order for Virtual Path Identifier (VPI)
dedicated to Virtual Channel Connections (VCCs).ro AdnAtmAllocOrder .1.3.6.1.4.1.637.3.1.4.37.1.2.1.46 |
adnAtmInterfaceRemNodeMacNumThe machine number part of adnAtmInterfaceRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.2.1.47 |
adnAtmInterfaceRemNodeAreaNumThe area number part of adnAtmInterfaceRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.2.1.48 |
adnAtmInterfaceAllowedAtcAllowed ATM Transfer Capabilities (ATC) for a Virtual Path
Connection (VPC) or Virtual Channel Connection (VCC)
supported by the ATM interface:
- 'anyAtc': The ATM interface is able to support any ATC
- 'ubr1Only': The ATM interface can only support Unspecified
Bit Rate 1 (UBR1) ATC.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.2.1.49 |
adnAtmVpiVccConfTableThis table describes the characteristics of the ATM
interface's Virtual Path Identifiers (VPIs) dedicated to
Virtual Channel Connections (VCCs). SEQUENCE OF AdnAtmVpiVccConfEntry .1.3.6.1.4.1.637.3.1.4.37.1.3 |
adnAtmVpiVccConfEntryAn entry in the adnAtmVpiVccConfTable. There is one entry
for each Virtual Path Identifier (VPI) dedicated to Virtual
Channel Connections (VCCs) on an ATM interface. AdnAtmVpiVccConfEntry .1.3.6.1.4.1.637.3.1.4.37.1.3.1 |
adnAtmVpiVccIndexThe value of the Virtual Path Identifier (VPI) dedicated to
Virtual Channel Connections (VCCs) on the ATM interface. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.1 |
adnAtmVpiVccTrmBandwidthThe bandwidth limitation (if any) of the Virtual Path
Identifier (VPI) dedicated to Virtual Channel Connections
(VCCs) in the transmit direction.
If both adnAtmVpiVccTrmBandwidth and adnAtmVpiVccRcvBandwidth
are set to zero, the bandwidth limitation is the interface
bandwidth.ro INTEGER -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.3.1.2 |
adnAtmVpiVccRcvBandwidthThe bandwidth limitation (if any) of the Virtual Path
Identifier (VPI) dedicated to Virtual Channel Connections
(VCCs) in the receiving direction. If both
adnAtmVpiVccRcvBandwidth and adnAtmVpiVccTrmBandwidth are
'0', the bandwidth limitation is the interface bandwidth.ro INTEGER -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.3.1.3 |
adnAtmVpiVccMaxFillingRateThe bandwidth filling rate of the Virtual Path Identifier
(VPI) dedicated to Virtual Channel Connections (VCCs).ro INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.3.1.4 |
adnAtmVpiVccMaxVccThe maximum number of Virtual Channel Connections (VCCs)
that can be set up on this Virtual Path Identifier (VPI).
Common Name: Max VCCs on VPIrodeprecated INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.5 |
adnAtmVpiVccMaxPVccsThe maximum number of permanent Virtual Channel Connections
(VCCs) that can be set up on this Virtual Path Identifier
(VPI).
Common Name: Max P-VCCs on VPIro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.6 |
adnAtmVpiVccPvccLowVciThe low value of the Virtual Channel Identifier (VCI) range
dedicated to permanent Virtual Channel Connections (VCCs)
on this Virtual Path Identifier (VPI).ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.7 |
adnAtmVpiVccPvccHighVciThe high value of the Virtual Channel Identifier (VCI)
range dedicated to permanent Virtual Channel Connections
(VCCs) on this Virtual Path Identifier (VPI).ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.8 |
adnAtmVpiVccMaxSVccsThe maximum number of switched Virtual Channel Connections
(VCCs) that can be set up on this Virtual Path Identifier
(VPI).
Common Name: Max S-VCCs on VPIro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.9 |
adnAtmVpiVccSvccAllocOrdThe Virtual Channel Identifier (VCI) allocation order for
switched Virtual Channel Connections (VCCs) on this Virtual
Path Identifier (VPI).ro AdnAtmAllocOrder .1.3.6.1.4.1.637.3.1.4.37.1.3.1.10 |
adnAtmVpiVccSvccLowVciThe low value of the Virtual Channel Identifier (VCI) range
dedicated to switched Virtual Channel Connections (VCCs) on
this Virtual Path Identifier (VPI).ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.11 |
adnAtmVpiVccSvccHighVciThe high value of the Virtual Channel Identifier (VCI)
range dedicated to switched Virtual Channel Connections
(VCCs) on this Virtual Path Identifier (VPI).ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.3.1.12 |
adnAtmSaalTableThis table describes the ATM Adaptation Layer (AAL)
configuration used in the ATM signalling and routing
protocol stacks. SEQUENCE OF AdnAtmSaalEntry .1.3.6.1.4.1.637.3.1.4.37.1.4 |
adnAtmSaalEntryAn entry in the adnAtmSaalTable. There is one entry for
each ATM Adaptation Layer (AAL) connection on an ATM
interface. AdnAtmSaalEntry .1.3.6.1.4.1.637.3.1.4.37.1.4.1 |
adnAtmSaalVpiThe Virtual Path Identifier (VPI) value of the Virtual
Channel Connection (VCC) for this Signalling ATM
Adaptation Layer (SAAL) connection. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.1 |
adnAtmSaalVciThe Virtual Channel Identifier (VCI) value of the Virtual
Channel Connection (VCC) for this Signalling ATM Adaptation
Layer (SAAL) connection. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.2 |
adnAtmSaalConnectTypeThe type of the ATM Adaptation Layer (AAL) connection.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.4.1.3 |
adnAtmSaalBandwidthThe bandwidth of the Virtual Channel Connection (VCC)
supporting this ATM Adaptation Layer (AAL) connection.rodeprecated INTEGER -- UNITS bits/sec .1.3.6.1.4.1.637.3.1.4.37.1.4.1.4 |
adnAtmSaalMaxCCThe maximum number of times an unacknowledged Connection
Control (CC) Protocol Data Unit (PDU) can be resent for
this Signalling ATM Adaptation Layer (SAAL) connection. The
connection is aborted when this value is exceeded.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.5 |
adnAtmSaalMaxPDThe maximum number of Sequenced Data (SD) Protocol Data
Units (PDUs) that can be sent before a polling PDU for this
Signalling ATM Adaptation Layer (SAAL) connection.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.6 |
adnAtmSaalMaxSTATThe maximum number of status parameters that can be sent in
a STATus (STAT) Protocol Data Unit (PDU) for this
Signalling ATM Adaptation Layer (SAAL) connection. The
value must be an odd number.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.7 |
adnAtmSaalCCTimerThe length (in milliseconds) of the Connection Control (CC)
Protocol Data Unit (PDU) timer for this Signalling ATM
Adaptation Layer (SAAL) connection. If this timer expires,
the CC PDU is resent.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.4.1.8 |
adnAtmSaalNoRespTimerThe time interval (in seconds) between STATtus (STAT)
Protocol Data Units (PDUs) received for this Signalling ATM
Adaptation Layer (SAAL) connection. If this timer expires,
the connection is aborted.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.4.1.9 |
adnAtmSaalPollTimerThe time interval (in milliseconds) between transmissions
of POLLing (POLL) Protocol Data Units (PDUs) during the
data transfer phase for this Signalling ATM Adaptation
Layer (SAAL) connection. If this timer expires, a POLL PDU
is sent.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.4.1.10 |
adnAtmSaalKeepAliveTimerThe amount of time (in milliseconds) allocated for waiting
for the STATus (STAT) Protocol Data Unit (PDU) solicited by
the final POLLing (POLL) PDU when activity ends on this
Signalling ATM Adaptation Layer (SAAL) connection.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.4.1.11 |
adnAtmSaalIdleTimerThe time interval (in seconds) between transmissions of
POLLing (POLL) Protocol Data Units (PDUs) when the
connection is no longer in the data transfer phase.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.4.1.12 |
adnAtmSaalMaxLengthThe maximum data length of the information field in
Protocol Data Units (PDUs) for this Signalling ATM
Adaptation Layer (SAAL) connection.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.4.1.13 |
adnAtmSaalAdminStatusThe current administrative status of this Signalling ATM
Adaptation Layer (SAAL) connection.ro AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.4.37.1.4.1.14 |
adnAtmSaalOperStatusThe current operational status of this Signalling ATM
Adaptation Layer (SAAL) connection.ro AdnAtmOperStatus .1.3.6.1.4.1.637.3.1.4.37.1.4.1.15 |
adnAtmSigTableThis table describes the signalling entity controlling an
ATM interface. SEQUENCE OF AdnAtmSigEntry .1.3.6.1.4.1.637.3.1.4.37.1.5 |
adnAtmSigEntryAn entry in the adnAtmSigTable. There is one entry for each
Virtual Channel Connection (VCC) controlling an ATM
interface. AdnAtmSigEntry .1.3.6.1.4.1.637.3.1.4.37.1.5.1 |
adnAtmSigVpiThe value of the Virtual Path Identifier (VPI) for the
Virtual Channel Connection (VCC) supporting this signalling
entity. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.5.1.1 |
adnAtmSigVciThe value of the Virtual Channel Identifier (VCI) for the
Virtual Channel Connection (VCC) supporting this signalling
entity. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.5.1.2 |
adnAtmSigProtocolThe signalling protocol type.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.3 |
adnAtmSigT301The length (in seconds) of the timer started upon receipt
of an Alerting message. This timer is stopped upon receipt
of a Connect message. When the timer expires, the
connection is released.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.4 |
adnAtmSigT302This timer, is not implemented.
The length (in seconds) of the timer started upon
transmission of a Setup acknowledge message and restarted
on the receipt of any Information message not containing a
sending complete indication. This timer is stopped upon
receipt of any of the following messages: Information
message containing a sending complete indication, Alerting,
or Connect request message. When the timer expires, a Call
proceeding, Alerting or Connect message is sent, as
appropriate if sufficient information has been received.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.5 |
adnAtmSigT303The length (in seconds) of the timer started upon
transmission of a Setup message. The timer is stopped upon
receipt of any of the following messages: Alerting,
Connect, Call Proceeding, or Release Complete. The first
time this timer expires, the Setup message is resent. The
second time it expires, the connection is cleared.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.6 |
adnAtmSigT304This timer is not implemented.
The length (in seconds) of the timer started upon receipt
of a Setup acknowledge message and restarted when each
Information message is sent. This timer is stopped upon
receipt of an Alerting, Connect, or Call proceeding
message. When the timer expires, the connection is
released.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.7 |
adnAtmSigT306This timer is not implemented.
The length (in seconds) of the timer started upon
transmission of a Release message. This timer is stopped
upon receipt of a Release complete message. When this timer
expires, a Release complete message is sent.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.8 |
adnAtmSigT308The length (in seconds) of the timer started upon
transmission of a Release message. The timer is stopped
upon receipt of a Release or Release complete message. The
first time this timer expires, the Release message is
resent. The second time it expires, the connection is
considered as cleared.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.9 |
adnAtmSigT309The length (in seconds) of the timer started upon receipt
of a Signalling ATM Adaptation Layer (SAAL) disconnection
indication. The timer is stopped upon receipt of a SAAL
reconnection indication. If the timer expires, all
connections carried by the faulty SAAL connection are
released.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.10 |
adnAtmSigT310The length (in seconds) of the timer started upon receipt
of a Call proceeding message. The timer is stopped upon
receipt of a Connect or Release message. If the timer
expires, the connection is released.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.11 |
adnAtmSigT313The length (in seconds) of the timer started upon
transmission of a Connect message. The timer is stopped
upon receipt of a Connect acknowledge message. If the
timer expires, the connection is cleared. This timer is
only applicable on the user side of the interface.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.12 |
adnAtmSigT316The length (in seconds) of the timer started upon
transmission of a Restart message. The timer is stopped
upon receipt of a Restart Acknowledge message. If the timer
expires, the Restart message may be resent several times.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.13 |
adnAtmSigT317The length (in seconds) of the timer started upon receipt
of a Restart message. The timer is stopped when the
internal clearing of called references is completed. If the
timer expires, a maintenance message is sent.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.14 |
adnAtmSigT322The length (in seconds) of the timer started upon
transmission of a Status enquiry message. The timer is
stopped upon receipt of a Status, Release, or Release
complete message. If the timer expires, the Status enquiry
message may be resent several times.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.15 |
adnAtmSigT398The length (in seconds) of the timer started upon
transmission of a Drop party message. The timer is stopped
upon receipt of a Drop party acknowledge, Add party reject,
or Release message. If the timer expires, the connection
is considered as cleared.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.16 |
adnAtmSigT399The length (in seconds) of the timer started upon
transmission of an Add party message. The timer is stopped
upon receipt of an Add party acknowledge, Add party reject,
or Release message. If the timer expires, the connection is
cleared.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.17 |
adnAtmSigT331This timer is not implemented.
The length (in seconds) of the timer started upon
transmission of an Leaf setup request message. The timer is
stopped upon receipt of a Setup, Add party, or Leaf setup
failure message. The first time this timer expires, the
leaf may optionally retransmit the Leaf setup request
message. The second time (or the first time if the resent
is not chosen) it expires, the connection is cleared.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.18 |
adnAtmSigT397This timer is not implemented.
The length (in seconds) of the timer started upon receipt
of an Alerting, or Add party alerting message. This timer
is stopped upon receipt of an Alerting acknowledge message.
When the timer expires, the connection is released.ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.5.1.19 |
adnAtmSigUserNetFlagWhether the interface follows the user or network side of
the protocol recommendations.
Common Names: User or Network Side,
User/Networkro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.20 |
adnAtmSigCallProcWhether Call proceeding message is to be sent (by the
switch) after a Setup message is received.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.21 |
adnAtmSigBrSendCompWhether broadband sending complete Information Element (IE)
is to be sent (by the switch) systematically in the Setup
messages.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.22 |
adnAtmSigSetupScreeningWhether the calling party number Information Element (IE)
of a Setup message is checked according to the
administrative address associated with the interfacero AdnAtmSigScreening .1.3.6.1.4.1.637.3.1.4.37.1.5.1.23 |
adnAtmSigDdiWhether Direct Dialing In (DDI) service is allowed.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.24 |
adnAtmSigMsnWhether Multiple Subscriber Number (MSN) service is
allowed.
This service is allowed only if adnAtmInterfaceType is
'externalUni'.
If the MSN is allowed, the associated addresses are
included in adnAtmReachAssocAddrTable.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.25 |
adnAtmSigSvccReconnectWhether reconnection User Network Interface (UNI) is
allowed for switched Virtual Channel Connections (VCCs).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.26 |
adnAtmSigCallBarringThe call barring service:
- 'no': No call barring
- 'incoming': Incoming Setup messages (sent by the switch)
are not allowed
- 'outgoing': Outgoing Setup messages (received by the
switch) are not allowed.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.27 |
adnAtmSigClipThe Calling Line Identification Presentation (CLIP) service
implementation. Whether the switch is allowed to update the
calling party number and subaddress Information Elements
(IEs) in each Setup message sent by the switch to the
called subscriber:
- 'enabledWithoutOverride': The calling party number IE is
transmitted (or inserted if it is not present) in the
Setup message sent. If the IE is present in the Setup
message received, according to the Presentation Indicator
(PI) field value, the address field could be modified by
the switch
- 'enabledWithOverride': The calling party number IE is
transmitted (or inserted if it is not present) in the
Setup message sent. If the IE is present in the Setup
message received, whatever the PI field value the address
field is transmitted in the Setup message sent
- 'disabled': The calling party number and subaddress IEs
are suppressed in the Setup message sent.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.28 |
adnAtmSigClirThe Calling Line Identification Restriction (CLIR) service
implementation. Whether the switch is allowed to update
the Presentation Indicator (PI) field of the calling party
number Information Element (IE) in each Setup message
received (issued from the calling subscriber) and forwarded
by the switch to the called subscriber.ro AdnAtmSigPIUpdate .1.3.6.1.4.1.637.3.1.4.37.1.5.1.29 |
adnAtmSigColpThe COnnected Line identification Presentation (COLP)
service implementation. Whether the switch is allowed to
update the connected party number and subaddress
Information Elements (IEs) in each Connect message received
by the switch (issued from the calling subscriber) and
forwarded to the called subscriber.
This object is not significant if adnAtmSigProtocol is
'atmfv31' because the connected party number and subaddress
IEs do not exist in the ATM FORUM User-Network Interface
(UNI) Specification V3.1.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.30 |
adnAtmSigColrThe COnnected Line identification Restriction (COLR)
service implementation. Whether the switch is allowed to
update the Presentation Indicator (PI) field of the
connected party number Information Element (IE) in each
Connect message received (issued from the calling
subscriber) and forwarded by the switch to the called
subscriber.
This object is not significant if adnAtmSigProtocol is
'atmfv31' because the connected party number ans subaddress
IEs do not exist in the ATM FORUM User-Network Interface
(UNI) Specification V3.1.ro AdnAtmSigPIUpdate .1.3.6.1.4.1.637.3.1.4.37.1.5.1.31 |
adnAtmSigSubWhether SUBaddressing (SUB) service is allowed. Whether the
network is allowed to transmit the called subaddress
Information Element (IE) in each Setup message forwarded.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.32 |
adnAtmSigUusWhether User User Signalling (UUS) service is allowed.
Whether the subscriber is allowed to insert the UUS
Information Element (IE) in the Setup message sent.
This object is not significant if adnAtmSigProtocol is
'atmfv31' because the UUS IE does not exist in the ATM
FORUM User-Network Interface (UNI) Specification V3.1.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.33 |
adnAtmSigVpiVciAllocWhether the VPi and VCi number are inserted in the Setup
request message. This object is significant only when the
switch follows the network side of the protocol
recommendations.
This object is significant only if adnAtmSigProtocol is
'atmfv40'.
The not significant value is 'disabled'.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.5.1.34 |
adnAtmSigCniCheckingStateThe current status of the validity checking phase which is
performed when setting an ATM trunk into service.
This read-only nominator is significant only if the
associated ATM interface is a trunk.
Common Name: CNI validity checkingro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.35 |
adnAtmSigSetupAddrThis nominator defines which addressing Information Element
(IE) is used by the switch to forward a Setup received.
- 'calledPartyNumber': The called party number is used to
forward the call, this is the normal case
- 'calledPartySubAddress': The called party subaddress is
used to forward the call as defined in E191 standard. In
this case, the switch replaces the called party number
received by the called party subaddress and forwards the
call with it. If no called party subaddress is received,
the call is rejected
- 'both': Depending on the content of the Setup received,
the call is forwarded either with the:
. called party subaddress (if present in the Setup
received)
. called party number if the call party subaddress is
not present in the Setup received.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.5.1.36 |
adnAtmSigConnectScreeningWhether the called party number Information Element (IE) of
a Connect message is checked according to the
administrative address associated with the interfacero AdnAtmSigScreening .1.3.6.1.4.1.637.3.1.4.37.1.5.1.37 |
adnAtmVplTableThis is an extension of the Virtual Path (VP) link table,
described in RFC 1695. SEQUENCE OF AdnAtmVplEntry .1.3.6.1.4.1.637.3.1.4.37.1.6 |
adnAtmVplEntryAn entry in the extension to the Virtual Path (VP) link
table. There is one entry for each VP link. AdnAtmVplEntry .1.3.6.1.4.1.637.3.1.4.37.1.6.1 |
adnAtmVplTopologyThe topology type of this Virtual Path Link (VPL).
Common Name: Topologyro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.1 |
adnAtmVplTrafficTypeThe type of traffic carried on this Virtual Path Link
(VPL).
Common Name: Traffic Typero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.2 |
adnAtmVplTypeThe type of this Virtual Path Link (VPL).
Common Name: VPL Typero AdnAtmVlType .1.3.6.1.4.1.637.3.1.4.37.1.6.1.3 |
adnAtmVplTransferCapabilityThe ATM Transfer Capabilities (ATC) offered on this Virtual
Path Link (VPL).ro AdnAtmVlTrfCapability .1.3.6.1.4.1.637.3.1.4.37.1.6.1.4 |
adnAtmVplTrafficDescrTypeThe type of Virtual Path Link (VPL) traffic descriptor in
the transmit and receiving direction. Depending on the
value, certain traffic parameters must be initialized:
- 'adnAtmTrafficDescPcrCdv':
The following traffic parameters must be initialized:
adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate,
adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol,
adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting,
- 'adnAtmTrafficDescPcrCdvScrMbs':
The following traffic parameters must be initialized:
adnAtmVplTrmPcrAggregate, adnAtmVplRcvPcrAggregate,
adnAtmVplTrmScrAggregate, adnAtmVplRcvScrAggregate,
adnAtmVplTrmMbsAggregate, adnAtmVplRcvMbsAggregate,
adnAtmVplTrmCdvTol, adnAtmVplRcvCdvTol,
adnAtmVplTrmBwWeighting, adnAtmVplRcvBwWeighting.rodeprecated Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.5 |
adnAtmVplTrmPcrAggregateThe Peak Cell Rate (PCR) for the aggregate traffic (Cell
Loss Priority (CLP) 0+1), in the transmit direction (switch
point of view), of this Virtual Path Link (VPL).
Common Names: Transmit Peak Cell Rate (PCR) Aggregate,
Transmit PCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.6 |
adnAtmVplTrmPcrClpZeroThe Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0
traffic, in the transmit direction, of this Virtual Path
Link (VPL).
Common Names: Transmit Peak Cell Rate (PCR) Cell Loss
Priority (CLP) 0,
Transmit PCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.7 |
adnAtmVplTrmScrAggregateThe Sustainable Cell Rate (SCR) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the transmit direction,
of this Virtual Path Link (VPL).
Common Names: Transmit Sustainable Cell Rate (SCR)
Aggregate,
Transmit SCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.8 |
adnAtmVplTrmScrClpZeroThe Sustainable Cell Rate (SCR) for the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, of this Virtual
Path Link (VPL).
Common Names: Transmit Sustainable Cell Rate (SCR) Cell
Loss Priority (CLP) 0,
Transmit SCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.9 |
adnAtmVplTrmMbsAggregateThe Maximum Burst Size (MBS) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1,) in the transmit direction,
of this Virtual Path Link (VPL).
Common Names: Transmit Maximum Burst Size (MBS) Aggregate,
Transmit MBS Aggregatero INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.6.1.10 |
adnAtmVplTrmMbsClpZeroThe Maximum Burst Size (MBS) for the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, of this Virtual
Path Link (VPL).
Common Names: Transmit Maximum Burst Size (MBS) Cell Loss
Priority (CLP) 0,
Transmit MBS CLP 0ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.6.1.11 |
adnAtmVplTrmCdvTolThe Cell Delay Variation (CDV) tolerance of the traffic, in
the transmit direction, of this Virtual Path Link (VPL).
Common Names: Transmit Cell Delay Variation (CDV)
Tolerance,
Transmit CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.1.6.1.12 |
adnAtmVplTrmBwWeightingThe weight applied to the allocated bandwidth, expressed as
a percentage, in the transmit direction.
Common Name: Transmit Bandwidth Weightingrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.6.1.13 |
adnAtmVplRcvPcrAggregateThe Peak Cell Rate (PCR) for the aggregate traffic (Cell
Loss Priority (CLP) 0+1), in the receiving direction, of
this Virtual Path Link (VPL).
Common Names: Receive Peak Cell Rate (PCR) Aggregate,
Receive PCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.14 |
adnAtmVplRcvPcrClpZeroThe Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0
traffic, in the receiving direction, of this Virtual Path
Link (VPL).
Common Names: Receive Peak Cell Rate (PCR) Cell Loss
Priority (CLP) 0,
Receive PCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.15 |
adnAtmVplRcvScrAggregateThe Sustainable Cell Rate (SCR) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the receiving direction,
of this Virtual Path Link (VPL).
Common Names: Receive Sustainable Cell Rate (SCR)
Aggregate,
Receive SCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.16 |
adnAtmVplRcvScrClpZeroThe Sustainable Cell Rate (SCR) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Path Link (VPL).
Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss
Priority (CLP) 0,
Receive SCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.6.1.17 |
adnAtmVplRcvMbsAggregateThe Maximum Burst Size (MBS) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the receiving direction,
of this Virtual Path Link (VPL).
Common Names: Receive Maximum Burst Size (MBS) Aggregate,
Receive MBS Aggregatero INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.6.1.18 |
adnAtmVplRcvMbsClpZeroThe Maximum Burst Size (MBS) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Path Link (VPL).
Common Names: Receive Maximum Burst Size (MBS) Cell Loss
Priority (CLP) 0,
Receive MBS CLP 0ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.6.1.19 |
adnAtmVplRcvCdvTolThe Cell Delay Variation (CDV) tolerance of the traffic, in
the receiving direction, of this Virtual Path Link (VPL).
Common Names: Receive Cell Delay Variation (CDV) Tolerance,
Receive CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.1.6.1.20 |
adnAtmVplRcvBwWeightingThe weight applied to the allocated bandwidth, expressed as
a percentage, in the receiving direction.
Common Name: Receive Bandwidth Weightingrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.6.1.21 |
adnAtmVplPolicingThe status of the policing function applied, in the
receiving direction, of this Virtual Path Link (VPL).ro AdnAtmVlPolicing .1.3.6.1.4.1.637.3.1.4.37.1.6.1.22 |
adnAtmVplPriorityThe Virtual Path Link (VPL) priority level.
Common Name: Priorityrodeprecated Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.23 |
adnAtmVplModeTypeWhether this permanent Virtual Path Link (VPL) was
created automatically by ATM signalling or manually by an
operator. Always 'notsignificant' for Switched Virtual
Connections (SVC) and InternalVc.
Common Name: Creation Modero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.24 |
adnAtmVplTrmAISStatusThe Alarm Indication Signal (AIS) end-to-end state, in the
transmit direction, of this permanent Virtual Path Link
(VPL).ro AdnAtmVlAISStatus .1.3.6.1.4.1.637.3.1.4.37.1.6.1.25 |
adnAtmVplTrmTrafficDescrTypeThe type of Virtual Path Link (VPL) traffic descriptor in
the transmit direction.ro AdnAtmVlTrfDescrType .1.3.6.1.4.1.637.3.1.4.37.1.6.1.26 |
adnAtmVplTrmTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, when cells are
not conformant, of this Virtual Path Link (VPL).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.6.1.27 |
adnAtmVplTrmPacketDiscardWhether packet discard option is enabled, in the transmit
direction, of this Virtual Path Link (VPL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.6.1.28 |
adnAtmVplRcvAISStatusThe Alarm Indication Signal (AIS) end-to-end state, in the
receiving direction, of this permanent Virtual Path Link
(VPL).ro AdnAtmVlAISStatus .1.3.6.1.4.1.637.3.1.4.37.1.6.1.29 |
adnAtmVplRcvTrafficDescrTypeThe type of Virtual Path Link (VPL) traffic descriptor in
the receiving direction.ro AdnAtmVlTrfDescrType .1.3.6.1.4.1.637.3.1.4.37.1.6.1.30 |
adnAtmVplRcvTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, when cells are
not conformant, of this Virtual Path Link (VPL).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.6.1.31 |
adnAtmVplRcvPacketDiscardWhether packet discard option is enabled, in the receiving
direction, of this Virtual Path Link (VPL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.6.1.32 |
adnAtmVplInternodeTypeWhether this Virtual Path Link (VPL) is associated with an
internode Virtual Path (VP) connection or not. If it is
associated, indicates which traffic type can be supported
for Virtual Channel Conections (VCCs) part of the internode
VP.
- 'notSignificant': VPL is not associated with an internode
VP
- 'rt': Real time traffic types
- 'nrtAggregate': Non-real time traffic types with
Quality Of Service (QOS) committment on
aggregate traffic (Cell Loss Priority
(CLP) 0+1)
- 'nrtZero': Non-real time traffic types with QOS
committment on CLP 0 traffic
- 'u': Unspecified bit rate traffic types
- 'anyAtc': Any traffic types.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.6.1.33 |
adnAtmVclTableThis is an extension of the VC Link table, described in RFC
1695. SEQUENCE OF AdnAtmVclEntry .1.3.6.1.4.1.637.3.1.4.37.1.7 |
adnAtmVclEntryAn entry in the VC Link extension table. There is one entry
for each VC link. AdnAtmVclEntry .1.3.6.1.4.1.637.3.1.4.37.1.7.1 |
adnAtmVclTopologyThe topology type of this Virtual Channel Link (VCL).
Common Name: Topologyro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.1 |
adnAtmVclTrafficTypeThe type of traffic carried on this Virtual Channel Link
(VCL).
Common Name: Traffic Typero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.2 |
adnAtmVclTypeThe type of this Virtual Channel Link (VCL).
Common Name: VCL Typero AdnAtmVlType .1.3.6.1.4.1.637.3.1.4.37.1.7.1.3 |
adnAtmVclTransferCapabilityThe ATM Transfer Capabilities (ATC) offered on this Virtual
Channel Link (VCL).ro AdnAtmVlTrfCapability .1.3.6.1.4.1.637.3.1.4.37.1.7.1.4 |
adnAtmVclTrafficDescrTypeThe type of Virtual Channel Link (VCL) traffic descriptor
in the transmit and receiving direction. Depending on the
value, certain traffic parameters must be initialized:
- 'adnAtmTrafficDescPcrCdv':
The following traffic parameters must be initialized:
adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate,
adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol,
adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting,
- 'adnAtmTrafficDescPcrCdvScrMbs':
The following traffic parameters must be initialized:
adnAtmVclTrmPcrAggregate, adnAtmVclRcvPcrAggregate,
adnAtmVclTrmScrAggregate, adnAtmVclRcvScrAggregate,
adnAtmVclTrmMbsAggregate, adnAtmVclRcvMbsAggregate,
adnAtmVclTrmCdvTol, adnAtmVclRcvCdvTol,
adnAtmVclTrmBwWeighting, adnAtmVclRcvBwWeighting.
Common Name: Traffic Descriptorrodeprecated Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.5 |
adnAtmVclTrmPcrAggregateThe Peak Cell Rate (PCR) for the aggregate traffic (Cell
Loss Priority (CLP) 0+1), in the transmit direction (switch
point of view), of this Virtual Channel Link (VCL).
Common Names: Transmit Peak Cell Rate (PCR) Aggregate,
Transmit PCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.7.1.6 |
adnAtmVclTrmPcrClpZeroThe Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0
traffic, in the transmit direction, of this Virtual
Channel Link (VCL).
Common Names: Transmit Peak Cell Rate (PCR) Cell Loss
Priority (CLP) 0,
Transmit PCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.7.1.7 |
adnAtmVclTrmScrAggregateThe Sustainable Cell Rate (SCR) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the transmit direction,
of this Virtual Channel Link (VCL).
Common Names: Transmit Sustainable Cell Rate (SCR)
Aggregate,
Transmit SCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.7.1.8 |
adnAtmVclTrmScrClpZeroThe Sustainable Cell Rate (SCR) for the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, of this Virtual
Channel Link (VCL).
Common Names: Transmit Sustainable Cell Rate (SCR) Cell
Loss Priority (CLP) 0,
Transmit SCR CLP 0ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.1.7.1.9 |
adnAtmVclTrmMbsAggregateThe Maximum Burst Size (MBS) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the transmit direction,
of this Virtual Channel Link (VCL).
Common Names: Transmit Maximum Burst Size (MBS) Aggregate,
Transmit MBS Aggregatero INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.7.1.10 |
adnAtmVclTrmMbsClpZeroThe Maximum Burst Size (MBS) for the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, of this Virtual
Channel Link (VCL).
Common Names: Transmit Maximum Burst Size (MBS) Cell Loss
Priority (CLP) 0,
Transmit MBS CLP 0ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.7.1.11 |
adnAtmVclTrmCdvTolThe Cell Delay Variation (CDV) tolerance of the traffic, in
the transmit direction, of this Virtual Channel Link (VCL).
Common Names: Transmit Cell Delay Variation (CDV)
Tolerance,
Transmit CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.1.7.1.12 |
adnAtmVclTrmBwWeightingThe weight applied to the allocated bandwidth, expressed as
a percentage, in the transmit direction.
Common Name: Transmit Bandwidth Weightingrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.7.1.13 |
adnAtmVclRcvPcrAggregateThe Peak Cell Rate (PCR) for the aggregate traffic (Cell
Loss Priority (CLP) 0+1), in the receiving direction, of
this Virtual Channel Link (VCL).
Common Names: Receive Peak Cell Rate (PCR) Aggregate,
Receive PCR Aggregatero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.14 |
adnAtmVclRcvPcrClpZeroThe Peak Cell Rate (PCR) for the Cell Loss Priority (CLP) 0
traffic, in the receiving direction, of this Virtual
Channel Link (VCL).
Common Names: Receive Peak Cell Rate (PCR) Cell Loss
Priority (CLP) 0,
Receive PCR CLP 0ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.15 |
adnAtmVclRcvScrAggregateThe Sustainable Cell Rate (SCR) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the receiving direction,
of this Virtual Channel Link (VCL).
Common Names: Receive Sustainable Cell Rate (SCR)
Aggregate,
Receive SCR Aggregatero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.16 |
adnAtmVclRcvScrClpZeroThe Sustainable Cell Rate (SCR) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Channel Link (VCL).
Common Names: Receive Sustainable Cell Rate (SCR) Cell Loss
Priority (CLP) 0,
Receive SCR CLP 0ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.17 |
adnAtmVclRcvMbsAggregateThe Maximum Burst Size (MBS) for the aggregate traffic
(Cell Loss Priority (CLP) 0+1), in the receiving direction,
of this Virtual Channel Link (VCL).
Common Names: Receive Maximum Burst Size (MBS) Aggregate,
Receive MBS Aggregatero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.18 |
adnAtmVclRcvMbsClpZeroThe Maximum Burst Size (MBS) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Channel Link (VCL).
Common Names: Receive Maximum Burst Size (MBS) Cell
Priority (CLP) 0,
Receive MBS CLP 0ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.7.1.19 |
adnAtmVclRcvCdvTolThe Cell Delay Variation (CDV) tolerance of the traffic, in
the receiving direction, of this Virtual Channel Link (VCL).
Common Names: Receive Cell Delay Variation (CDV) Tolerance,
Receive CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.1.7.1.20 |
adnAtmVclRcvBwWeightingThe weight applied to the allocated bandwidth, expressed as
a percentage, in the receiving direction.
Common Name: Receive Bandwidth Weightingrodeprecated INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.4.37.1.7.1.21 |
adnAtmVclPolicingThe status of the policing function applied, in the
receiving direction, of this Virtual Channel Link (VCL).ro AdnAtmVlPolicing .1.3.6.1.4.1.637.3.1.4.37.1.7.1.22 |
adnAtmVclPriorityThe Virtual Channel Link (VCL) priority level.
Common Name: Priorityrodeprecated Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.23 |
adnAtmVclModeTypeWhether this permanent Virtual Channel Link (VCL) was
created automatically by ATM signalling or manually by an
operator. Always 'notSignificant' for Switched Virtual
Connections (SVC) and InternalVc.
Common Name: Creation Modero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.24 |
adnAtmVclTrmAISStatusThe Alarm Indication Signal (AIS) end-to-end state, in the
transmit direction, of this permanent Virtual Channel Link
(VCL).ro AdnAtmVlAISStatus .1.3.6.1.4.1.637.3.1.4.37.1.7.1.25 |
adnAtmVclTrmTrafficDescrTypeThe type of Virtual Channel Link (VCL) traffic descriptor
in the transmit direction.ro AdnAtmVlTrfDescrType .1.3.6.1.4.1.637.3.1.4.37.1.7.1.26 |
adnAtmVclTrmTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, when cells are
not conformant, of this Virtual Channel Link (VCL).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.7.1.27 |
adnAtmVclTrmPacketDiscardWhether packet discard option is enabled, in the transmit
direction, of this Virtual Channel Link (VCL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.7.1.28 |
adnAtmVclRcvAISStatusThe Alarm Indication Signal (AIS) end-to-end state, in the
receiving direction, of this permanent Virtual Channel Link
(VCL).ro AdnAtmVlAISStatus .1.3.6.1.4.1.637.3.1.4.37.1.7.1.29 |
adnAtmVclRcvTrafficDescrTypeThe type of Virtual Channel Link (VCL) traffic descriptor
in the receiving direction.ro AdnAtmVlTrfDescrType .1.3.6.1.4.1.637.3.1.4.37.1.7.1.30 |
adnAtmVclRcvTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, when cells are
not conformant, of this Virtual Channel Link (VCL).ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.7.1.31 |
adnAtmVclRcvPacketDiscardWhether packet discard option is enabled, in the receiving
direction, of this Virtual Channel Link (VCL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.4.37.1.7.1.32 |
adnAtmVclLogLineTypeThe type of service using the frame relay logical line:
- franpOverAtm: FRANP truncking over ATM
- netIWsc2OneToOne: Network interworking scenario 2 with
each Fame Relay (FR) connection mapped
to a single ATM Virtual Channel
Connection (VCC)
- netIWsc2ManyToOne: Network interworking scenario 2 with
multiple FR connections multiplexed
into a single ATM VCC
- netIWsc1: Network interworking scenario 1
- serIW: Service interworking
- issc: NMS-ISS connection over ATM.
Common Name: Logical Line Typero Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.7.1.33 |
adnAtmUniVpCconnectTableThe ATM User Network Interface (UNI) Virtual Path
cross-connect table. SEQUENCE OF AdnAtmUniVpCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.8 |
adnAtmUniVpCconnectEntryAn entry in the User Network Interface (UNI) Virtual Path
cross-connect table. There is one entry for each User
Network Interface/Network Network Interface (UNI/NNI)
Virtual Path (VP) cross-connection. An entry describes both
the local cross-connection and the end-to-end
cross-connection. AdnAtmUniVpCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.8.1 |
adnAtmUniVpCconnectIndexThe index of the cross-connection for the Virtual Path
Connection (VPC) on this interface. The index is 0 for a
point-to-point cross-connection. There is a different index
for each leaf in a point-to-multipoint cross-connection.
Common Name: Cross-connection Index INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.1 |
adnAtmUniVpCconnectOutIfIndexThe ifIndex of the output ATM interface from this node.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.2 |
adnAtmUniVpCconnectOutVpiThe Virtual Path Identifier (VPI) of this connection on the
output ATM interface from this node. In conjunction with
adnAtmUniVpCconnectOutIfIndex, this VPI can be used for
path tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.3 |
adnAtmUniVpCconnectOutCcnIndexThe cross-connection index of this output Virtual Path
Identifier (VPI) of the output ATM interface from this
node. This can be combined with
adnAtmUniVpCconnectOutIfIndex and adnAtmUniVpCconnectOutVpi
and used for call tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.4 |
adnAtmUniVpCconnectAdminStatusThe current administrative status of this Virtual Path (VP)
cross-connection. The 'up' and 'down' states indicate
whether or not this ATM VP cross-connection is operational.rw AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.4.37.1.8.1.5 |
adnAtmUniVpCconnectOperStatusThe current Virtual Path Connection (VPC) call attempt
state.ro AdnAtmUniOperStatus .1.3.6.1.4.1.637.3.1.4.37.1.8.1.6 |
adnAtmUniVpCconnectSourceDestWhether this is the source or destination side of the
virtual cross-connection.ro AdnAtmUniSourceDest .1.3.6.1.4.1.637.3.1.4.37.1.8.1.7 |
adnAtmUniVpCconnectStatisticsWhether statistics are enabled for this Virtual Path (VP)
cross-connection.
This object is significant only if the type of the Virtual
Path Link (VPL), specified by adnAtmVplType, is set to
'pvc'; otherwise, the statistics status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.
Common Name: Statisticsrw Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.8.1.8 |
adnAtmUniVpCconnectDirectedPathWhether this Virtual Path Connection (VPC) uses a directed
path.rw AdnAtmDirectedPath .1.3.6.1.4.1.637.3.1.4.37.1.8.1.9 |
adnAtmUniVpCconnectRetryAttemptsThe number of call attempts to make at the fast rate
(adnAtmUniVpCconnectFastRetry) before slowing the call
attempt rate to adnAtmUniVpCconnectSlowRetry. The current
attempt state is in adnAtmUniVpCconnectOperStatus. This
object is significant only if adnAtmUniVpCconnectSourceDest
is 'source', adnAtmVplType is 'pvc' and adnAtmVplModeType
is 'automatic'.
Common Name: Retry Attempts at Fast Ratero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.10 |
adnAtmUniVpCconnectFastRetryThis timer specifies the amount of time to wait between
failed Permanent Virtual Connection (PVC) setup attempts at
the fast rate. After attempting setups at this rate for
adnAtmUniVpCconnectCRetryAttempts times, the rate slows to
the adnAtmUniVpCconnectSlowRetry rate. This object is
significant only if adnAtmUniVpCconnectSourceDest is
'source', adnAtmVplType is 'pvc', and adnAtmVplModeType is
'automatic'.
Common Name: Wait Time between Fast Retriesro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.8.1.11 |
adnAtmUniVpCconnectSlowRetryThis timer specifies the amount of time to wait between
failed Permanent Virtual Connection (PVC) setup attempts at
the slow rate. After attempting setups at the
adnAtmUniVpCconnectFastRetry rate for
adnAtmUniVpCconnectRetryAttempts times, the rate slows to
the adnAtmUniVpCconnectSlowRetry rate. This is significant
only if adnAtmUniVpCconnectSourceDest is 'source',
adnAtmVplType is 'pvc', and adnAtmVplModeType is
'automatic'.
Common Name: Wait Time between Slow Retriesro INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.4.37.1.8.1.12 |
adnAtmUniVpCconnectRemNumPlanThe numbering plan of the remote User Network Interface
(UNI) for the current Virtual Path (VP) cross-connection.
Common Names: Remote Numbering Plan,
Rem Num Planro AdnAtmNumPlan .1.3.6.1.4.1.637.3.1.4.37.1.8.1.13 |
adnAtmUniVpCconnectRemPhysAddressThe address of the remote User Network Interface/Network
Network Interface (UNI/NNI) for the current Virtual Path
(VP) cross-connection.
Common Name: Remote Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.14 |
adnAtmUniVpCconnectRemVpiThe Virtual Path Identifier (VPI) of the remote User
Network Interface/Network Network Interface (UNI/NNI) for
the current Virtual Path (VP) cross-connection.
Common Name: Remote VPIro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.15 |
adnAtmUniVpCconnectRemCcnIndexThe value of the remote User Network Interface/Network
Network Interface (UNI/NNI) cross-connection for the
current Virtual Path (VP) cross-connection.
Common Name: Remote Cross-connection Indexro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.16 |
adnAtmUniVpCconnectRemRoutingNodeIdThe identifier of the node connecting the remote User
Network Interface/Network Network Interface (UNI/NNI) for
the current Virtual Path (VP) cross-connection.
Common Name: Remote Node Identifierro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.8.1.17 |
adnAtmUniVpCconnectCumulNodesThe number of nodes in the connection. If
adnAtmUniVpCconnectOperStatus is 'callup', this is the
current nodes count; otherwise, it is the nodes count for
the last connection.
Common Name: Number of Nodesro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.18 |
adnAtmUniVpCconnectMaxTransitDelayThe maximum allowed transit delay of this Virtual Path (VP)
cross-connection.
This object is significant only if the type of the Virtual
Path Link (VPL), specified by adnAtmVplType, is set to
'pvc'.
In case of 'svc', the maximum transit delay is defined per
interface or could be defined in an Information Element
If set to 0, the value defined per interface is used.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.8.1.19 |
adnAtmUniVpCconnectChargingWhether charging is enabled for this Virtual Path (VP)
cross-connection.
This object is significant only if the type of the Virtual
Path Link (VPL), specified by adnAtmVplType, is set to
'pvc'; otherwise, the charging status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.rw Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.8.1.20 |
adnAtmUniVpCconnectCumulTDThe current cumulative transit delay of this Virtual Path
(VP) cross-connection.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.8.1.21 |
adnAtmUniVpCconnectCumulMonetaryCstThe current cumulative monetary cost of this Virtual Path
(VP) cross-connection.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.22 |
adnAtmUniVpCconnectCauseErrorGlobal cause of the cross-connect failure.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.8.1.23 |
adnAtmUniVpCconnectLastCanpCauseLast Cell Alcatel Network Protocol (CANP) cause.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.24 |
adnAtmUniVpCconnectLastErrorNodeIDThe identifier of the node detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.8.1.25 |
adnAtmUniVpCconnectLastLocationATM forum location value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.26 |
adnAtmUniVpCconnectLastCauseATM forum cause value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.27 |
adnAtmUniVpCconnectLastDiagATM forum diagnostic value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.28 |
adnAtmUniVpCconnectRemNodeMacNumThe machine number part of
adnAtmUniVpCconnectRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.29 |
adnAtmUniVpCconnectRemNodeAreaNumThe area number part of
adnAtmUniVpCconnectRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.30 |
adnAtmUniVpCconnectErrorNodeMacNumThe machine number part of
adnAtmUniVpCconnectLastErrorNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.31 |
adnAtmUniVpCconnectErrorNodeAreaNumThe area number part of adnAtmUniVpCconnectLastErrorNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.32 |
adnAtmUniVpCconnectLastChassisThe chassis number detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.33 |
adnAtmUniVpCconnectLastSlotThe slot number of the board detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVpCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.34 |
adnAtmUniVpCconnectMaxHopsThe maximum allowed number of hops of this Virtual Path (VP)
cross-connection.
If set to 65535, the value defined at node level is used.
Common Name: Number of hopsro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.8.1.35 |
adnAtmUniVpCconnectPvcDescrThis object contains the Permanent Virtual Connection (PVC)
description inserted in each charging ticket generated for
this Virtual Path (VP) cross-connection.
This object is significant only if the type of the Virtual
Path Link (VPL), specified by adnAtmVplType, is set to
'pvc'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.8.1.36 |
adnAtmCniVpCconnectTableThe Virtual Path (VP) cross-connect table on the inter-node
ATM interfaces (Cell alcatel Network protocol Interfaces
(CNIs)). SEQUENCE OF AdnAtmCniVpCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.9 |
adnAtmCniVpCconnectEntryAn entry in the Cell alcatel Network protocol Interface
(CNI) Virtual Path (VP) cross-connect table. There is one
entry for each VP cross-connection on a CNI. AdnAtmCniVpCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.9.1 |
adnAtmCniVpCconnectIndexThe index of the cross-connection for the Virtual Path
Connection (VPC) on this interface. In a point-to-point
cross-connection, the index equals 0. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.9.1.1 |
adnAtmCniVpCconnectOutIfIndexThe ifIndex of this node's output ATM interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.9.1.2 |
adnAtmCniVpCconnectOutVpiThe Virtual Path Identifier (VPI) of this connection on the
output ATM interface from this node. In conjunction with
adnAtmCniVpCconnectOutIfIndex, this can be used for path
tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.9.1.3 |
adnAtmCniVpCconnectOutCcnIndexThe cross-connection index of the output Virtual Path
Identifier (VPI) of this node's output ATM interface. This
index can be used with adnAtmCniVpCconnectOutIfIndex and
adnAtmCniVpCconnectOutVpi for call tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.9.1.4 |
adnAtmCniVpCconnectAdminStatusThe current administrative status of this Virtual Path (VP)
cross-connection. The 'up' and 'down' states indicate
whether or not this ATM VP cross-connection is operational.ro AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.4.37.1.9.1.5 |
adnAtmCniVpCconnectOperStatusThe current Virtual Path Connection (VPC) call attempt
state.ro AdnAtmCniOperStatus .1.3.6.1.4.1.637.3.1.4.37.1.9.1.6 |
adnAtmCniVpCconnectSourceDestWhether this is the source or destination side of the
cross-connection.ro AdnAtmCniSourceDest .1.3.6.1.4.1.637.3.1.4.37.1.9.1.7 |
adnAtmCniVpCconnectStatisticsWhether statistics are enabled for this Virtual Path (VP)
cross-connection.
This object is significant only if the type of the Virtual
Path Link (VPL), specified by adnAtmVplType, is set to
'pvc'; otherwise, the statistics status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.
Common Name: Statisticsro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.9.1.8 |
adnAtmCniVpCconnectDirectedPathWhether this Virtual Path Connection (VPC) uses a directed
path.ro AdnAtmDirectedPath .1.3.6.1.4.1.637.3.1.4.37.1.9.1.9 |
adnAtmUniVcCconnectTableThe ATM User Network Interface (UNI) Virtual Channel
cross-connect table. SEQUENCE OF AdnAtmUniVcCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.10 |
adnAtmUniVcCconnectEntryAn entry in the ATM User Network Interface (UNI) Virtual
Channel (VC) cross-connect table. There is one entry for
each UNI VC cross-connection. An entry describes both the
local cross-connection and the end-to-end cross-connection. AdnAtmUniVcCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.10.1 |
adnAtmUniVcCconnectIndexThe index of the cross-connection for the Virtual Channel
Connection (VCC) on this interface. In a point-to-point
cross-connection, the index equals zero. In a point-to-
-multipoint cross-connection, there is a different index
for each leaf.
Common Name: Cross-connection Index INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.1 |
adnAtmUniVcCconnectOutIfIndexThe ifIndex of this node's output ATM interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.2 |
adnAtmUniVcCconnectOutVpiThe Virtual Path Identifier (VPI) of this connection on the
output ATM interface from this node. In conjunction with
adnAtmUniVcCconnectOutIfIndex, this VPI can be used for
path tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.3 |
adnAtmUniVcCconnectOutVciThe Virtual Channel Identifier (VCI) of this node's output
interface. This cross-connection exits the node on another
VCI. This value can be combined with
adnAtmUniVcCconnectOutIfIndex and
adnAtmUniVcCconnectOutVpi and used for call tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.4 |
adnAtmUniVcCconnectOutCcnIndexThe cross-connection index of the output Virtual Path
Identifier/Virtual Channel Identifier (VPI/VCI) of this
node's output interface. This value can be combined with
adnAtmUniVcCconnectOutIfIndex, adnAtmUniVcCconnectOutVpi,
and adnAtmUniVcCconnectOutVci and used for call tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.5 |
adnAtmUniVcCconnectAdminStatusThe current administrative status of this Virtual Channel
(VC) cross-connection. The 'up' and 'down' states specify
whether or not this ATM VC cross-connection is operational.rw AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.4.37.1.10.1.6 |
adnAtmUniVcCconnectOperStatusThe current Virtual Channel Connection (VCC) call attempt
state.ro AdnAtmUniOperStatus .1.3.6.1.4.1.637.3.1.4.37.1.10.1.7 |
adnAtmUniVcCconnectSourceDestWhether this is the source or destination side of the
virtual cross-connection.ro AdnAtmUniSourceDest .1.3.6.1.4.1.637.3.1.4.37.1.10.1.8 |
adnAtmUniVcCconnectStatisticsWhether statistics are enabled for this Virtual Channel
(VC) cross-connection.
This object is significant only if the type of the Virtual
Channel Link (VCL), specified by adnAtmVclType, is set to
'pvc'; otherwise, the statistics status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.
Common Name: Statisticsrw Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.10.1.9 |
adnAtmUniVcCconnectDirectedPathWhether this Virtual Channel Connection (VCC) uses a
directed path.rw AdnAtmDirectedPath .1.3.6.1.4.1.637.3.1.4.37.1.10.1.10 |
adnAtmUniVcCconnectRetryAttemptsThe number of call attempts to make at the fast rate
(adnAtmUniVcCconnectFastRetry) before slowing the call
attempt rate to adnAtmUniVcCconnectSlowRetry.
adnAtmUniVcCconnectOperStatus specifies the current attempt
state. This object is significant only if
adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is
'pvc', and adnAtmVclModeType is 'automatic'.
Common Name: Retry Attempts at Fast Ratero INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.11 |
adnAtmUniVcCconnectFastRetryThis timer specifies the amount of time to wait between
failed Permanent Virtual Connection (PVC) setup attempts at
the fast rate. After making attempts at this rate the
number of times specified by
adnAtmUniVcCconnectCRetryAttempts, the rate slows to
adnAtmUniVcCconnectSlowRetry. This is significant only if
adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is
'pvc', and adnAtmVclModeType is 'automatic'.
Common Name: Wait Time between Fast Retriesro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.4.37.1.10.1.12 |
adnAtmUniVcCconnectSlowRetryThis timer specifies the amount of time to wait between
failed Permanent Virtual Connection (PVC) setup attempts at
the slow rate. After making attempts at the
adnAtmUniVcCconnectFastRetry rate the number of times
specified by adnAtmUniVcCconnectRetryAttempts, the rate
slows to this rate. This object is significant only if
adnAtmUniVcCconnectSourceDest is 'source', adnAtmVclType is
'pvc', and adnAtmVclModeType is 'automatic'.
Common Name: Wait Time between Slow Retriesro INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.4.37.1.10.1.13 |
adnAtmUniVcCconnectRemNumPlanThe numbering plan of the remote User Network Interface
(UNI) for the current Virtual Channel (VC)
cross-connection.
Common Names: Remote Numbering Plan,
Rem Num Planro AdnAtmNumPlan .1.3.6.1.4.1.637.3.1.4.37.1.10.1.14 |
adnAtmUniVcCconnectRemPhysAddressThe address of the current Virtual Channel (VC)
cross-connection's remote User Network Interface/Network
Network Interface (UNI/NNI).
Common Name: Remote Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.15 |
adnAtmUniVcCconnectRemVpiThe Virtual Path Identifier (VPI) of the current Virtual
Channel (VC) cross-connection's remote User Network
Interface/Network Network Interface (UNI/NNI).
Common Name: Remote Virtual Path Identifier (VPI)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.16 |
adnAtmUniVcCconnectRemVciThe Virtual Channel Identifier (VCI) value of the current
Virtual Channel (VC) cross-connection's remote User Network
Interface/Network Network Interface (UNI/NNI).
Common Name: Remote Virtual Channel Identifier (VCI)ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.17 |
adnAtmUniVcCconnectRemCcnIndexThe index value of the current Virtual Channel (VC)
cross-connection's remote User Network Interface/Network
Network Interface (UNI/NNI).
Common Name: Remote UNI Cross-Connection Indexro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.18 |
adnAtmUniVcCconnectRemRoutingNodeIdThe identifier of the node connecting the remote User
Network Interface/Network Network Interface (UNI/NNI) for
the current Virtual Channel (VC) cross-connection.
Common Name: Remote Node Identifierro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.10.1.19 |
adnAtmUniVcCconnectCumulNodesThe number of nodes in the connection. If
adnAtmUniVcCconnectOperStatus is 'callup', this is the
current nodes count; otherwise, it is the nodes count for
the last connection.
Common Name: Number of Nodesro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.20 |
adnAtmUniVcCconnectMaxTransitDelayThe maximum allowed transit delay of this Virtual Channel
(VC) cross-connection.
This object is significant only if the type of the Virtual
Channel Link (VCL), specified by adnAtmVplType, is set to
'pvc'.
In case of 'svc', the maximum transit delay is defined per
interface or could be defined in an Information Element
If set to 0, the value defined per interface is used.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.10.1.21 |
adnAtmUniVcCconnectChargingWhether charging is enabled for this Virtual Channel (VC)
cross-connection.
This object is significant only if the type of the Virtual
Channel Link (VCL), specified by adnAtmVclType, is set to
'pvc'; otherwise, the charging status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.rw Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.10.1.22 |
adnAtmUniVcCconnectCumulTDThe current cumulative transit delay of this Virtual
Channel (VC) cross-connection.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.10.1.23 |
adnAtmUniVcCconnectCumulMonetaryCstThe current cumulative monetary cost of this Virtual
Channel (VC) cross-connection.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.10.1.24 |
adnAtmUniVcCconnectCauseErrorGlobal cause of the cross-connect failure.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.10.1.25 |
adnAtmUniVcCconnectLastCanpCauseLast Cell Alcatel Network Protocol (CANP) cause.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.26 |
adnAtmUniVcCconnectLastErrorNodeIDThe identifier of the node detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notSignificant'.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.10.1.27 |
adnAtmUniVcCconnectLastLocationATM forum location value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.28 |
adnAtmUniVcCconnectLastCauseATM forum cause value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notsignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.29 |
adnAtmUniVcCconnectLastDiagATM forum diagnostic value in the cause information element.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notsignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.30 |
adnAtmUniVcCconnectRemNodeMacNumThe machine number part of
adnAtmUniVpCconnectRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.31 |
adnAtmUniVcCconnectRemNodeAreaNumThe area number part of adnAtmUniVcCconnectRemRoutingNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.32 |
adnAtmUniVcCconnectErrorNodeMacNumThe machine number part of
adnAtmUniVcCconnectLastErrorNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.33 |
adnAtmUniVcCconnectErrorNodeAreaNumThe area number part of adnAtmUniVcCconnectLastErrorNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.34 |
adnAtmUniVcCconnectLastChassisThe chassis number detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.35 |
adnAtmUniVcCconnectLastSlotThe slot number of the board detecting the error.
This nominator, which is read only, is not significant if
adnAtmUniVcCconnectCauseError is equal to 'notSignificant'.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.36 |
adnAtmUniVcCconnectPvcDescrThis object contains the Permanent Virtual Connection (PVC)
description inserted in each charging ticket generated for
this Virtual Channel (VC) cross-connection.
This object is significant only if the type of the Virtual
Channel Link (VCL), specified by adnAtmVclType, is set to
'pvc'.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.10.1.37 |
adnAtmCniVcCconnectTableThe Virtual Channel (VC) cross-connect table for the
inter-node ATM interfaces (Cell alcatel Network protocol
Interfaces (CNIs)). SEQUENCE OF AdnAtmCniVcCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.11 |
adnAtmCniVcCconnectEntryAn entry in the Cell alcatel Network protocol Interface
(CNI) Virtual Channel (VC) cross-connect table. There is
one entry for each VC cross-connection on a CNI. AdnAtmCniVcCconnectEntry .1.3.6.1.4.1.637.3.1.4.37.1.11.1 |
adnAtmCniVcCconnectIndexThe index of the cross-connection for this Virtual Channel
Connection (VCC) on this interface. In a point-to-point
cross-connection, the index equals 0. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.11.1.1 |
adnAtmCniVcCconnectOutIfIndexThe ifIndex of the output ATM interface from this node.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.4.37.1.11.1.2 |
adnAtmCniVcCconnectOutVpiThe Virtual Path Identifier (VPI) of this connection on the
output ATM interface from this node. In conjunction with
adnAtmCniVcCconnectOutIfIndex, this VPI can be used for
path tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.11.1.3 |
adnAtmCniVcCconnectOutVciThe Virtual Channel Identifier (VCI) of this node's output
interface. This cross-connection exits this node on another
VCI. This value can be combined with
adnAtmCniVcCconnectOutIfIndex and adnAtmCniVcCconnectOutVpi
and used for call tracing.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.11.1.4 |
adnAtmCniVcCconnectOutCcnIndexThe cross-connection index of the Virtual Path
Identifier/Virtual Channel Identifier (VPI/VCI) of this
node's output interface. This value can be used for call
tracing if combined with adnAtmCniVcCconnectOutIfIndex,
adnAtmCniVcCconnectOutVpi, and adnAtmCniVcCconnectOutVci.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.11.1.5 |
adnAtmCniVcCconnectAdminStatusThe current administrative status of this Virtual Channel
(VC) cross-connection. The 'up' and 'down' states indicate
whether or not this ATM VC cross-connection is
operational.ro AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.4.37.1.11.1.6 |
adnAtmCniVcCconnectOperStatusThe current Virtual Channel Connection (VCC) call attempt
state.ro AdnAtmCniOperStatus .1.3.6.1.4.1.637.3.1.4.37.1.11.1.7 |
adnAtmCniVcCconnectSourceDestWhether this is the source or destination side of the
cross-connection.ro AdnAtmCniSourceDest .1.3.6.1.4.1.637.3.1.4.37.1.11.1.8 |
adnAtmCniVcCconnectStatisticsWhether statistics are enabled for this Virtual Channel
(VC) cross-connection.
This object is significant only if the type of the Virtual
Channel Link (VCL), specified by adnAtmVclType, is set to
'pvc'; otherwise, the statistics status is defined per
interface.
If set to 'useInterfaceValue', the value defined per
interface is used.
Common Name: Statisticsro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.11.1.9 |
adnAtmCniVcCconnectDirectedPathWhether this Virtual Channel Connection (VCC) uses a
directed path.ro AdnAtmDirectedPath .1.3.6.1.4.1.637.3.1.4.37.1.11.1.10 |
adnAtmVpcDirRoutTableThis table contains the directed path, used to set up
point-to-point permanent Virtual Path Connections (VPCs).
A directed path is composed of a list of node identifier
and outgoing line identifiers. This table is configured
only in the origin node of the cross-connection. The
path between the origin and the destination node could be
partly or completely described by the list, but it is only
used if adnAtmUniVpCconnectDirectedPath is set to
'enabled'. SEQUENCE OF AdnAtmVpcDirRoutEntry .1.3.6.1.4.1.637.3.1.4.37.1.12 |
adnAtmVpcDirRoutEntryAn entry in the adnAtmVpcDirRoutTable. There is one entry
for each element of each list specifing a directed path. AdnAtmVpcDirRoutEntry .1.3.6.1.4.1.637.3.1.4.37.1.12.1 |
adnAtmVpcDirRoutIndexThe index of an element in the list of this Virtual Path
Connection (VPC). INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.12.1.1 |
adnAtmVpcDirRoutNodeIdThe identifier of the next node to be used to reach the
destination node, for this Virtual Path Connection (VPC).ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.12.1.2 |
adnAtmVpcDirRoutOutChassisThe chassis number, within the current node, supporting the
line used to reach the next node, specified by
adnAtmVpcDirRoutNodeId.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.12.1.3 |
adnAtmVpcDirRoutOutSlotThe slot number, within the current node, supporting the
line used to reach the next node, specified by
adnAtmVpcDirRoutNodeId.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.12.1.4 |
adnAtmVpcDirRoutOutLineThe line number, within the current node, used to reach the
next node, specified by adnAtmVpcDirRoutNodeId.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.12.1.5 |
adnAtmVpcDirRoutFlagWhether only the outgoing line specified must be used to
reach the next node or not.ro AdnAtmDirRoutFlag .1.3.6.1.4.1.637.3.1.4.37.1.12.1.6 |
adnAtmVpcDirRoutNodeMacNumThe machine number part of adnAtmVpcDirRoutNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.12.1.7 |
adnAtmVpcDirRoutNodeAreaNumThe area number part of adnAtmVpcDirRoutNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.12.1.8 |
adnAtmVccDirRoutTableThis table contains the directed path, used to set up
point-to-point permanent Virtual Channel Connections (VPCs).
A directed path is composed of a list of node identifier
and outgoing line identifiers. This table is configured
only in the origin node of the cross-connection. The
path between the origin and the destination node could be
partly or completely described by the list, but it is only
used if adnAtmUniVcCconnectDirectedPath is set to
'enabled'. SEQUENCE OF AdnAtmVccDirRoutEntry .1.3.6.1.4.1.637.3.1.4.37.1.13 |
adnAtmVccDirRoutEntryAn entry in the adnAtmVccDirRoutTable. There is one entry
for each element of each list specifing a directed path. AdnAtmVccDirRoutEntry .1.3.6.1.4.1.637.3.1.4.37.1.13.1 |
adnAtmVccDirRoutIndexThe index of an element in the list of this Virtual Channel
Connection (VCC). INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.13.1.1 |
adnAtmVccDirRoutNodeIdThe identifier of the next node to be used to reach the
destination node, for this Virtual Channel Connection
(VCC).ro AdnRoutingID .1.3.6.1.4.1.637.3.1.4.37.1.13.1.2 |
adnAtmVccDirRoutOutChassisThe chassis number, within the current node, supporting the
line used to reach the next node, specified by
adnAtmVccDirRoutNodeId.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.13.1.3 |
adnAtmVccDirRoutOutSlotThe slot number, within the current node, supporting the
line used to reach the next node, specified by
adnAtmVccDirRoutNodeId.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.13.1.4 |
adnAtmVccDirRoutOutLineThe line number, within the current node, used to reach the
next node, specified by adnAtmVccDirRoutNodeId.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.13.1.5 |
adnAtmVccDirRoutFlagWhether only the outgoing line specified must be used to
reach the next node or not.ro AdnAtmDirRoutFlag .1.3.6.1.4.1.637.3.1.4.37.1.13.1.6 |
adnAtmVccDirRoutNodeMacNumThe machine number part of adnAtmVccDirRoutNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.13.1.7 |
adnAtmVccDirRoutNodeAreaNumThe area number part of adnAtmVccDirRoutNodeID.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.13.1.8 |
adnAtmReachAddrTableThis table contains either:
- The list of prefix addresses which can be reached through
the Interim Inter-switch Signalling Protocol (IISP) link
supported by the associated ATM interface. Each prefix
entry may be associated with a list of addresses
specified in the AdnAtmReachAssocAddrTable
- The list of complete addresses registered with Interim
Local Management Interface (ILMI) or configured if the
Multiple Subscriber Number (MSN) service is offered. SEQUENCE OF AdnAtmReachAddrEntry .1.3.6.1.4.1.637.3.1.4.37.1.14 |
adnAtmReachAddrEntryAn entry in the adnAtmReachAddrTable. There is one entry
for each element of the list. AdnAtmReachAddrEntry .1.3.6.1.4.1.637.3.1.4.37.1.14.1 |
adnAtmReachAddrIndexThe index of an element in the list. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.14.1.1 |
adnAtmReachAddrNumPlanThe number plan of the prefix or complete address specified
in adnAtmReachAddrNumber.
Common Names: Numbering Plan,
Num Planro AdnAtmNumPlan .1.3.6.1.4.1.637.3.1.4.37.1.14.1.2 |
adnAtmReachAddrNumberLengthThe number of digits of the prefix address specified in
adnAtmReachAddrNumber.
If adnAtmReachAddrNumPlan is set to 'private', a digit size
is equal to half a byte otherwise it is equal to one byte.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.14.1.3 |
adnAtmReachAddrNumberThe prefix address which can be reached through the Interim
Inter-switch Signalling Protocol (IISP) link supported by
the associated ATM interface or the complete address
registered with Interim Local Management Interface (ILMI)
or configured if the Multiple Subscriber Number (MSN)
service is offered.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.14.1.4 |
adnAtmReachAddrAssocIndexThe index of the list of the associated addresses in the
adnAtmReachAssocAddrTable.
This object could be significant only if the associated ATM
interface support an Interim Inter-switch Signalling
Protocol (IISP) link.
Not significant value (65535) indicates that there is no
associated address in adnAtmReachAssocAddrTable.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.14.1.5 |
adnAtmReachAssocAddrTableThis table contains all the lists of associated addresses
of prefix addresses described in the adnAtmReachAddrTable. SEQUENCE OF AdnAtmReachAssocAddrEntry .1.3.6.1.4.1.637.3.1.4.37.1.15 |
adnAtmReachAssocAddrEntryAn entry in the adnAtmReachAssocAddrTable. There is one
entry for each element of each list. AdnAtmReachAssocAddrEntry .1.3.6.1.4.1.637.3.1.4.37.1.15.1 |
adnAtmReachAssocAddrIndexThe index of a list in the table. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.15.1.1 |
adnAtmReachAssocAddrNumIndexThe index of an element in a list. INTEGER .1.3.6.1.4.1.637.3.1.4.37.1.15.1.2 |
adnAtmReachAssocAddrNumPlanThe number plan of the associated address specified by
adnAtmReachAssocAddrAddress.
Common Names: Numbering Plan,
Num Planro AdnAtmNumPlan .1.3.6.1.4.1.637.3.1.4.37.1.15.1.3 |
adnAtmReachAssocAddrAddressThe associated address used to transit through an other
network which has not the same number plan.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.4.37.1.15.1.4 |
adnAtmInterfacePerfTableThis table contains counters related to the ATM interface. SEQUENCE OF AdnAtmInterfacePerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.16 |
adnAtmInterfacePerfEntryAn entry in the adnAtmInterfacePerfTable. There is one
entry for each ATM interface. AdnAtmInterfacePerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.16.1 |
adnAtmInterfacePerfTrmAllocBwVpiForVccThe allocated bandwidth, in the transmit direction, for all
Virtual Path Identifiers (VPIs) dedicated to Virtual
Channel Connections (VCCs).
If all VPIs dedicated to VCCs have no bandwidth limitation
(adnAtmVpiVccTrmBandwidth = 0), this counter equals 0.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.1 |
adnAtmInterfacePerfRcvAllocBwVpiForVccThe allocated bandwidth, in the receiving direction, for
all Virtual Path Identifiers (VPIs) dedicated to Virtual
Channel Connections (VCCs).
If all VPIs dedicated to VCCs have no bandwidth limitation
(adnAtmVpiVccRcvBandwidth = 0), this counter equals 0.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.2 |
adnAtmInterfacePerfTrmAllocBwVpcsThe allocated bandwidth, in the transmit direction, for all
Virtual Path Connections (VPCs) created on this ATM
interface.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.3 |
adnAtmInterfacePerfRcvAllocBwVpcsThe allocated bandwidth, in the receiving direction, for
all Virtual Path Connections (VPCs) created on this ATM
interface.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.4 |
adnAtmInterfacePerfTrmAllocBwVccsThe allocated bandwidth, in the transmit direction, for all
Virtual Channel Connections (VCCs) having a Virtual Path
Identifier (VPI) with no bandwidth limiation, created on
this ATM interface.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.5 |
adnAtmInterfacePerfRcvAllocBwVccsThe allocated bandwidth, in the receiving direction, for
all Virtual Channel Connections (VCCs) having a Virtual
Path Identifier (VPI) with no bandwidth limiation, created
on this ATM interface.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.16.1.6 |
adnAtmInterfacePerfPPtpVpcsThe number of permanent point-to-point Virtual Path
Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.7 |
adnAtmInterfacePerfSPtpVpcsThe number of switched point-to-point Virtual Path
Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.8 |
adnAtmInterfacePerfPPtmRootVpcsThe number of permanent point-to-multipoint root Virtual
Path Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.9 |
adnAtmInterfacePerfSPtmRootVpcsThe number of switched point-to-multipoint root Virtual
Path Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.10 |
adnAtmInterfacePerfPPtmLeafVpcsThe number of permanent point-to-multipoint leaf Virtual
Path Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.11 |
adnAtmInterfacePerfSPtmLeafVpcsThe number of switched point-to-multipoint leaf Virtual
Path Connections (VPCs) on this ATM interface.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.16.1.12 |
adnAtmVpiVccPerfTableThis table contains counters related to the Virtual Channel
Link (VCL) of each Virtual Path Identifier (VPI) dedicated
to Virtual Channel Connections (VCCs) on an ATM interface. SEQUENCE OF AdnAtmVpiVccPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.17 |
adnAtmVpiVccPerfEntryAn entry in the adnAtmVpiVccPerfTable. There is one entry
for each Virtual Path Identifier (VPI) dedicated to Virtual
Channel Connections (VCCs) on an ATM interface. AdnAtmVpiVccPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.17.1 |
adnAtmVpiVccPerfTrmAllocBwVccsThe allocated bandwidth, in the transmit direction, for all
Virtual Channel Connections (VCCs).If the VPI dedicated to
VCCs has no bandwidth limitation, this counter equals 0
and the allocated bandwidth is accounted in the counter
adnAtmInterfacePerfTrmAllocBwVccs.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.17.1.1 |
adnAtmVpiVccPerfRcvAllocBwVccsThe allocated bandwidth, in the receiving direction, for
all Virtual Channel Connections (VCCs).If the VPI dedicated
to VCCs has no bandwidth limitation, this counter equals 0
and the allocated bandwidth is accounted in the counter
adnAtmInterfacePerfRcvAllocBwVccs.ro Counter -- UNITS bit/secs .1.3.6.1.4.1.637.3.1.4.37.1.17.1.2 |
adnAtmVpiVccPerfPPtpVccsThe number of permanent point-to-point Virtual Channel
Connections (VCCs) on this Virtual Path Identifier (VPI)
dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.3 |
adnAtmVpiVccPerfSPtpVccsThe number of switched point-to-point Virtual Channel
Connections (VCCs) on this Virtual Path Identifier (VPI)
dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.4 |
adnAtmVpiVccPerfPPtmRootVccsThe number of permanent point-to-multipoint root Virtual
Channel Connections (VCCs) on this Virtual Path Identifier
(VPI) dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.5 |
adnAtmVpiVccPerfSPtmRootVccsThe number of switched point-to-multipoint root Virtual
Channel Connections (VCCs) on this Virtual Path Identifier
(VPI) dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.6 |
adnAtmVpiVccPerfPPtmLeafVccsThe number of permanent point-to-multipoint leaf Virtual
Channel Connections (VCCs) on this Virtual Path Identifier
(VPI) dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.7 |
adnAtmVpiVccPerfSPtmLeafVccsThe number of switched point-to-multipoint leaf Virtual
Channel Connections (VCCs) on this Virtual Path Identifier
(VPI) dedicated to Virtual Channel Connections (VCCs).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.17.1.8 |
adnAtmVplPerfTableThis table contains counters relative to each Virtual Path
Link (VPL). SEQUENCE OF AdnAtmVplPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.18 |
adnAtmVplPerfEntryAn entry in the adnAtmVplPerfTable. There is one entry for
each Virtual Path Link (VPL). AdnAtmVplPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.18.1 |
adnAtmVplPerfRcvCellForwardedThe number of cells received and forwarded (after police
processing) on the Virtual Path Link (VPL).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.18.1.1 |
adnAtmVplPerfRcvCellDiscardedThe number of cells received on the Virtual Path Link
(VPL) and discarded by the police processing.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.18.1.2 |
adnAtmVplPerfRcvCellVsaANonConformThe number of cells received on the Virtual Path Link (VPL)
and declared non conform by the Virtual Scheduling
Algorithm (VSA) A of the police processing.
This object is significant only if the VSA A is enabled.
The VSA A is enabled or not according to the ATM Transfer
Capability (ATC) of the VPL.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.18.1.3 |
adnAtmVplPerfRcvCellVsaBNonConformThe number of cells received on the Virtual Path Link (VPL)
and declared non conform by the Virtual Scheduling
Algorithm (VSA) B of the police processing.
Whatever the ATM Transfer Capability (ATC) of the VPL, the
VSA B is always enabled.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.18.1.4 |
adnAtmVplPerfRcvCellTaggedThe number of cells received on the Virtual Path Link (VPL)
and tagged by the police processing.
This object is significant only if the tagging option is
enabled on the VPL.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.18.1.5 |
adnAtmVclPerfTableThis table contains counters relative to each Virtual
Channel Link (VCL). SEQUENCE OF AdnAtmVclPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.19 |
adnAtmVclPerfEntryAn entry in the adnAtmVclPerfTable. There is one entry for
each Virtual Channel Link (VCL). AdnAtmVclPerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.19.1 |
adnAtmVclPerfRcvCellForwardedThe number of cells received and forwarded (after police
processing) on the Virtual Channel Link (VCL).ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.19.1.1 |
adnAtmVclPerfRcvCellDiscardedThe number of cells received on the Virtual Channel Link
(VCL) and discarded by the police processing.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.19.1.2 |
adnAtmVclPerfRcvCellVsaANonConformThe number of cells received on the Virtual Channel Link
(VCL) and declared non conform by the Virtual Scheduling
Algorithm (VSA) A of the police processing.
This object is significant only if the VSA A is enabled.
The VSA A is enabled or not according to the ATM Transfer
Capability (ATC) of the VCL.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.19.1.3 |
adnAtmVclPerfRcvCellVsaBNonConformThe number of cells received on the Virtual Channel Link
(VCL) and declared non conform by the Virtual Scheduling
Algorithm (VSA) B of the police processing.
Whatever the ATM Transfer Capability (ATC) of the VCL, the
VSA B is always enabled.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.19.1.4 |
adnAtmVclPerfRcvCellTaggedThe number of cells received on the Virtual Channel Link
(VCL) and tagged by the police processing.
This object is significant only if the tagging option is
enabled on the VCL.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.19.1.5 |
adnAtmAal5PerfTableThis table is the extension of the aal5VCCTable, described
in RFC 1695. This table contains ATM Adaptation Layer 5
(AAL5) performance counters. SEQUENCE OF AdnAtmAal5PerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.20 |
adnAtmAal5PerfEntryAn entry in the adnAtmAal5PerfTable. There is one entry for
each ATM Adaptation Layer 5 (AAL5) Virtual Channel
Connection (VCC). AdnAtmAal5PerfEntry .1.3.6.1.4.1.637.3.1.4.37.1.20.1 |
adnAtmAal5PerfLengthErrorsThe number of ATM Adaptation Layer 5 (AAL5) Common Part
Convergence Sublayer (CPCS) PDUs discarded on this Virtual
Channel Link (VCL) because the value of the length field in
the PDU trailer is not consistent with the actual PDU
payload length.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.20.1.1 |
adnAtmAal5PerfCpiErrorsThe number of ATM Adaptation Layer 5 (AAL5) Common Part
Convergence Sublayer (CPCS) PDUs discarded on this Virtual
Channel Link (VCL) because the value of the Common Part
Interface (CPI) field in the PDU trailer is not 0.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.20.1.2 |
adnAtmTCTableThe ADN Transmission Convergence (TC)
extension table. SEQUENCE OF AdnAtmTCEntry .1.3.6.1.4.1.637.3.1.4.37.1.50 |
adnAtmTCEntryAn entry in the ADN Transmission
Convergence (TC) extension table. AdnAtmTCEntry .1.3.6.1.4.1.637.3.1.4.37.1.50.1 |
adnAtmTCAlarmStateThis variable indicates the state
of alarms of the Transmission and
Convergence part of ATM layer.
It includes information given by
atmTCAlarmState.
It is a bit map represented as a sum;
therefore, it can represent multiple
defects simultaneously.
The adnAtmTCNoAlarm bit should
be set only if no other bit is set.
The bit positions and their corresponding
ATM core counter numbers # are:
# Bit Value
. 1 adnAtmTCNoAlarm
. No alarm present
17 2 adnAtmTCCorrectedHec
. Excessive number of cells corrected
. through Header Error Control (HEC)
18 4 adnAtmTCUncorrectedHec
. Excessive number of cells deleted
. through Header Error Control (HEC)
22 8 adnAtmTCUpwardOverflow
. Upwards cell buffer overflow
26 16 adnAtmTCDownwardOverflow
. Downwards cell buffer overflow
25 32 adnAtmTCLossOfAtmSignalCounter
. Loss of ATM signal from the ET part
. to the LT part of the boardro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.1.50.1.1 |
adnAtmTCScramblerConfigDefines if ATM scrambler is active or not.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.50.1.2 |
adnAtmTCCellRateDecConfigThe type of cell rate decoupling (CRD) mode
selected for the ATM TC layer:
- unassigned cells (ANSI),
- idle cells (ITU),
- no CRD for an ATM TC layer
over an ATM internal line.
Common Name: Cell Rate Decouplingro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.50.1.3 |
adnAtmTCMappingConfigThe type of mapping of ATM layer
on physical layer:
- other mapping : the mapping of the
ATM layer is none of the following
mappings,
- PLCP mapping : the ATM layer is
mapped on Physical Layer Convergence
Protocol layer (PLCP),
- direct mapping : the ATM layer is
directly mapped on transmission layer.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.1.50.1.4 |
adnAtmTCLossOfCellDelCounterDuration of loss-of-cell-delineation
(LOCD).
Counter #16 of the ATM core, only
available on ATM-SONET, ATM-SDH,
ATM-DS3-DM, ATM-E3, ATM-T1 and ATM-E1
interfaces.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.50.1.5 |
adnAtmTCCorrectedHecCounterNumber of cells corrected through Header
Error Control (HEC) mechanisms.
Counter #17 of the ATM core, only
available on ATM interfaces over lines
on BBTP3C, BBE3B, BBE3B3,
BBS1B, BBS1B3, BBS1B2, BBS1B4,
BBS4B or BBS4B2 board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.50.1.6 |
adnAtmTCUncorrectedHecCounterNumber of cells discarded through Header
Error Control (HEC) mechanisms.
Counter #18 of the ATM core, only
available on ATM-SONET, ATM-SDH, ATM-DS3,
ATM-E3, ATM-T1 and ATM-E1 interfaces.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.1.50.1.7 |
adnAtmTCUpwardOverflowCounterNumber of upward cell buffer (output
buffer) overflow events.
Counter #22 of the ATM core, only
available on ATM interfaces over lines
on BBT1B, BBE1B, BBE3B, BBE3B3,
BBT3B, BBT3B2, BBT3B3, BBT3B4,
BBS1B, BBS1B3, BBS1B2, BBS1B4,
BBS4B or BBS4B2 board.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.50.1.8 |
adnAtmTCDownwardOverflowCounterNumber of downward cell buffer (input
buffer) overflow events.
Counter #26 of the ATM core, only
available on ATM-SONET, ATM-SDH, ATM-DS3,
and ATM-E3 interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.50.1.9 |
adnAtmTCLossOfAtmSignalCounterDuration of loss of ATM signal from
the Exchange Termination processor
(ET) to the Line Termination
processor (LT).
Counter #31 of the ATM core, only
available on ATM interfaces over lines
on BBS1B, BBS1B3, BBS1B2, or BBS1B4 board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.1.50.1.10 |
adnAtmDs3PlcpTableThe ADN DS3 Physical Layer Convergence
Protocol (PLCP) extension table. SEQUENCE OF AdnAtmDs3PlcpEntry .1.3.6.1.4.1.637.3.1.4.37.1.51 |
adnAtmDs3PlcpEntryAn entry in the ADN DS3 Physical Layer
Convergence Protocol (PLCP) extension
table. AdnAtmDs3PlcpEntry .1.3.6.1.4.1.637.3.1.4.37.1.51.1 |
adnAtmDs3PlcpFerfCounterDuration of far end received
failure (FERF) received from the
remote equipment.
FERF is also called remote alarm
indication (RAI) or received yellow
alarm.
Counter #10 of the ATM core, only
available on DS3-PLCP interfaces.ro Counter -- UNITS 450-milliseconds periods .1.3.6.1.4.1.637.3.1.4.37.1.51.1.1 |
adnAtmDs3PlcpLofCounterDuration of loss-of-frame (LOF).
Counter #12 of the ATM core, only
available on DS3-PLCP interfaces.ro Counter -- UNITS 450-milliseconds periods .1.3.6.1.4.1.637.3.1.4.37.1.51.1.2 |
adnAtmDs3PlcpFebeCounterNumber of far end block errors (FEBE)
received from the remote equipment.
Counter #9 of the ATM core, only
available on DS3-PLCP interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.51.1.3 |
adnAtmDs3PlcpBip8CounterNumber of 8-bits interleaved parity
(BiP-8) errors.
received from the remote equipment.
Counter #11 of the ATM core, only
available on DS3-PLCP interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.51.1.4 |
adnAtmDs3PlcpOofCounterNumber of out-of-frame (OOF) events.
Counter #20 of the ATM core, only
available on DS3-PLCP interfaces.ro Counter .1.3.6.1.4.1.637.3.1.4.37.1.51.1.5 |
adnAtmAccTableThis table constitutes the ATM charging ticket. None
of the objects in this table can be obtained via a GET
command. These objects are visible only in a charging
ticket.
Most of these objects duplicate objects in other tables.
They are concatenated here to allow the charging ticket
to be sent as a single INMP/PFXI table to conserve space. SEQUENCE OF AdnAtmCharEntry .1.3.6.1.4.1.637.3.1.4.37.2 |
adnAtmAccEntryOne instance of the ATM charging ticket. AdnAtmCharEntry .1.3.6.1.4.1.637.3.1.4.37.2.1 |
adnAtmAccEquipTypeThis is the type of the equipment which generates
this charging ticket.
hss700 : Alcatel 1100 HSS Series 400/700,
hss1000 : Alcatel 1100 HSS Series 1000.
Common Name : Equipment Type. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.1 |
adnAtmAccTicketVersionThis is the identifier of the version (format) of this ATM
charging ticket.
This object is numbered per type of equipment listed in
adnAtmAccEquipType.
adnAtmAccTicketVersion = 1 is the first value for
Alcatel 1100 HSS Series 400/700.
Common Name : Charging Ticket Version. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.2 |
adnAtmAccLocalNodeIdThis is the identifier of the node which generates this
charging ticket.
For HSS, the format of the ADN Node Routing ID is used :
Bits 31-23 (9 bits) reserved for future use
Bits 22-16 ( 7 bits) area identifier
Bits 15-0 (16 bits) machine identifier
Common Name : Local Node Identifier. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.3 |
adnAtmAccLocalChassisThis is the chassis number where the interface is located.
Common Name : Local Chassis INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.4 |
adnAtmAccLocalSlotThis is the slot number of the interface in the chassis.
Common Name : Local Slot INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.5 |
adnAtmAccLocalLineThis is the line number in the slot.
Common Name : Local Line INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.6 |
adnAtmAccRemoteNodeIdThis is the identifier of the node which supports the
connection at the remote side.
For HSS, the format of the ADN Node Routing ID is used :
Bits 31-23 (9 bits) reserved for future use
Bits 22-16 ( 7 bits) area identifier
Bits 15-0 (16 bits) machine identifier
Common Name : Remote Node Identifier. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.7 |
adnAtmAccRemoteChassisThis is the chassis number where the remote interface is
located.
Common Name : Remote Chassis. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.8 |
adnAtmAccRemoteSlotThis is the slot number of the interface in the remote
chassis.
Common Name : Remote Slot INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.9 |
adnAtmAccRemoteLineThis is the line number in the remote slot.
Common Name : Remote Line INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.10 |
adnAtmAccCallTermThis object indicates a terminated ticket or an intermediate
charging ticket :
- terminated : PVC has been de-configured or disrupted
SVC has been cleared (user or network cause)
- intermediate : periodic collection of PVCs and long SVCs
operator initiated collection of PVCs and
SVCs.
Intermediate tickets are for future use.
Common Name : Call Terminated / not Terminated. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.11 |
adnAtmAccInterfaceTypeType of the ATM interface on which generates this charging
ticket.
Common Name : ATM Interface Type. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.12 |
adnAtmAccConnectionTypeThis is the connection type : PVC versus SVC.
Only the following values can be provided in a HSS charging
ticket :
- pvc, - svc.
Common Name : Connection Type. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.13 |
adnAtmAccConnectionTopologyThis object describes the characteristics of the connection
at the location where this charging ticket is generated :
Only the following values can be provided in a HSS charging
ticket :
- pointTopoint.
Common Name : Connection Topology. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.14 |
adnAtmAccSourceDestThis object indicates the location of the node which
generates this charging ticket :
- source : the node receives the SET-UP message from
the calling user.
- destination : the node transmits the SET-UP message to
the called user.
- transit : this value is reserved for the 1000 HSS
Series 1000 system (this system may generate charging
ticket on trunks for observation purposes).
Common Name : Source or Destination. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.15 |
adnAtmAccCallingPartyNumPlanThis is the type of numbering plan of the calling party
number.
Common Name : Numbering Plan, Num Plan. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.16 |
adnAtmAccCallingPartyLengthThis is the number of significant digits in object
adnAtmAccCallingParty.
Common Name : Length of Calling Party Number. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.17 |
adnAtmAccCallingPartyNumberThis is the value of the calling party number
(fixed length of 40 digits).
Common Name : Calling Party Number. OCTET STRING .1.3.6.1.4.1.637.3.1.4.37.2.1.18 |
adnAtmAccCalledPartyNumPlanThis is the type of numbering plan of the called party
number.
Common Name : Numbering Plan, Num Plan. Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.19 |
adnAtmAccCalledPartyLengthThis is the number of significant digits in object
adnAtmAccCalledParty.
Common Name : Length of Called Party Number. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.20 |
adnAtmAccCalledPartyNumberThis is the value of the called party number
(fixed length of 40 digits).
Common Name : Called Party Number. OCTET STRING .1.3.6.1.4.1.637.3.1.4.37.2.1.21 |
adnAtmAccLocalVpiThe Virtual Path Identifier (VPI) value on the local ATM
interface.
Common Name : Virtual Path Identifier (VPI). INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.22 |
adnAtmAccLocalVciThe Virtual Channel Identifier (VCI) value on the local
ATM interface.
Common Name : Virtual Channel Identifier (VCI). INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.23 |
adnAtmAccRemVpiThe Virtual Path Identifier (VPI) value at the remote
ATM interface.
Common Name : Remote Virtual Path Identifier (VPI). INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.24 |
adnAtmAccRemVciThe Virtual Channel Identifier (VCI) value at the remote
ATM interface.
Common Name : Remote Virtual Channel Identifier (VCI). INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.25 |
adnAtmAccConnUniqueIDThis object serves to uniquely identify the two charging
tickets that are generated at both ends of an ATM
connection. The ConnUniqueID is a value which is local
to the calling ATM interface, it is incremented by the
calling ATM interface.
The ConnUniqueID is significant for :
- each point to point connection,
- each leaf of a point to point connection.
Common name : Connection Unique Identifier INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.26 |
adnAtmAccConnStartTimeIn the first ticket generated :
- this indicates the time of the CONNECT message
when the establishment phase has been successful,
- this indicates the time of the SET-UP message
when the establishment phase has been unsuccessful,
In the following intermediate tickets :
- this indicates the time of the start of the interval.
This is the coordinated universal time :
number of seconds elapsed since 1970/01/01.
Common name : Start Time. INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.27 |
adnAtmAccConnDurationThis object represents the duration (tenths of a second)
while the connection has been in the transfer phase.
The total duration of a connection is to be accumulated
over all the intermediate tickets that are generated
for that connection.
Common name : Duration of the Ticket. INTEGER (-2147483648..2147483647) -- UNITS tenths of a second .1.3.6.1.4.1.637.3.1.4.37.2.1.28 |
adnAtmAccReqTransitDelayThis is the value of the transit delay required by the
user for that connection.
Common name : Required Transit Delay.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.2.1.29 |
adnAtmAccCumulTransitDelayThis is the value of the transit delay provided by the
network for that connection.
Common name : Cumulative Transit Delay.ro INTEGER -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.4.37.2.1.30 |
adnAtmAccTransferCapabilityThe ATM Transfer Capabilities (ATC) offered on a virtual
cross-connection (Virtual Path Connection (VPC) and Virtual
Channel Connection (VCC)):
- Constant Bit Rate (CBR) ATC: CBR Real Time (RT),
CBR Non Real Time (NRT)
- Variable Bit Rate (VBR) ATC: VBR RT,
VBR NRT
- Unspecified Bit Rate (UBR) ATC.
Common Name: ATM Transfer Capability (ATC).ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.31 |
adnAtmAccTrmTrafficDescrTypeThe type of a virtual cross-connection (Virtual Path
Connection (VPC) and Virtual Channel Connection (VCC))
traffic descriptor in the transmit direction.
Depending on the value, the following traffic parameters
(defined in the same direction) are initialized:
- 'pcrCdv': .PcrAggregate PARAM1
.CdvTol PARAM2
- 'pcrCdvScrMbs': .PcrAggregate PARAM1
.CdvTol PARAM2
.ScrAggregate PARAM3
.MbsAggregate PARAM4
- 'pcrCdvPcr0': .PcrAggregate PARAM1
.CdvTol PARAM2
.PcrClpZero PARAM3
- 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1
.CdvTol PARAM2
.ScrClpZero PARAM3
.MbsClpZero PARAM4
Common name : Traffic Descriptor in the Transmit Direction.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.32 |
adnAtmAccTrmParam1PARAM1 : always equal to the Peak Cell Rate (PCR) for the
aggregate traffic (Cell Loss Priority (CLP) 0+1),
in the transmit direction (switch point of view),
of this Virtual Channel Link (VCL).
Common Names: PARAM1,
Transmit Peak Cell Rate (PCR) Aggregate,
Transmit PCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.2.1.33 |
adnAtmAccTrmParam2PARAM2 : always equal to the Cell Delay Variation (CDV)
tolerance of the traffic, in the transmit direction, of
this Virtual Channel Link (VCL).
Common Names: PARAM2,
Transmit Cell Delay Variation (CDV) Tolerance,
Transmit CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.2.1.34 |
adnAtmAccTrmParam3Depending on the value of object
'adnAtmAccTrmTrafficDescrType' this object
adnAtmAccTrmParam3 represents one of the following values :
a) The Sustainable Cell Rate (SCR) for the aggregate
traffic (Cell Loss Priority (CLP) 0+1), in the transmit
direction, of this Virtual Channel Link (VCL).
Common Names:
Transmit Sustainable Cell Rate (SCR) Aggregate,
Transmit SCR Aggregate.
b) The Peak Cell Rate (PCR) for the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, of this
Virtual Channel Link (VCL).
Common Names: Transmit Peak Cell Rate (PCR) Cell Loss
Priority (CLP) 0,
Transmit PCR CLP 0.
c) The Sustainable Cell Rate (SCR) for the Cell
Loss Priority (CLP) 0 traffic, in the transmit
direction, of this Virtual Channel Link (VCL).
Common Names: Transmit Sustainable Cell Rate (SCR)
Cell Loss Priority (CLP) 0,
Transmit SCR CLP 0.
Common Name : PARAM3.ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.2.1.35 |
adnAtmAccTrmParam4Depending on the value of object
'adnAtmAccTrmTrafficDescrType' this object
adnAtmAccTrmParam4 represents one of the following
values :
a) The Maximum Burst Size (MBS) for the aggregate
traffic (Cell Loss Priority (CLP) 0+1), in the
transmit direction, of this Virtual Channel Link (VCL).
Common Names: Transmit Maximum Burst Size (MBS)
Aggregate,
Transmit MBS Aggregate.
b) The Maximum Burst Size (MBS) for the Cell Loss
Priority (CLP) 0 traffic, in the transmit direction,
of this Virtual Channel Link (VCL).
Common Names: Transmit Maximum Burst Size (MBS)
Cell Loss Priority (CLP) 0,
Transmit MBS CLP 0
Common Name : PARAM4.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.2.1.36 |
adnAtmAccTrmTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the transmit direction, when cells are
not conformant, of this Virtual Channel Link (VCL).
Common Name : Cell Tagging Option.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.37 |
adnAtmAccTrmPacketDiscardWhether packet discard option is enabled, in the transmit
direction, of this Virtual Channel Link (VCL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.
Common Name : Tail Packet Discard.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.38 |
adnAtmAccRcvTrafficDescrTypeThe type of a virtual cross-connection (Virtual Path
Connection (VPC) and Virtual Channel Connection (VCC))
traffic descriptor in the receive direction.
Depending on the value, the following traffic parameters
(defined in the same direction) are initialized:
- 'pcrCdv': .PcrAggregate PARAM1
.CdvTol PARAM2
- 'pcrCdvScrMbs': .PcrAggregate PARAM1
.CdvTol PARAM2
.ScrAggregate PARAM3
.MbsAggregate PARAM4
- 'pcrCdvPcr0': .PcrAggregate PARAM1
.CdvTol PARAM2
.PcrClpZero PARAM3
- 'pcrCdvScr0Mbs0': .PcrAggregate PARAM1
.CdvTol PARAM2
.ScrClpZero PARAM3
.MbsClpZero PARAM4
Common name : Traffic Descriptor in the Receiving Direction.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.39 |
adnAtmAccRcvParam1PARAM1 : always equal to the Peak Cell Rate (PCR) for the
aggregate traffic (Cell Loss Priority (CLP) 0+1),
in the receiving direction (switch point of view),
of this Virtual Channel Link (VCL).
Common Names: PARAM1,
Receive Peak Cell Rate (PCR) Aggregate,
Receive PCR Aggregatero INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.2.1.40 |
adnAtmAccRcvParam2PARAM2 : always equal to the Cell Delay Variation (CDV)
tolerance of the traffic, in the receiving direction,
of this Virtual Channel Link (VCL).
Common Names: PARAM2,
Receive Cell Delay Variation (CDV) Tolerance,
Receive CDV Tolerancero INTEGER -- UNITS microseconds .1.3.6.1.4.1.637.3.1.4.37.2.1.41 |
adnAtmAccRcvParam3Depending on the value of object
'adnAtmAccTrmTrafficDescrType' this object
adnAtmAccRcvParam3
represents one of the following values :
a) The Sustainable Cell Rate (SCR) for the aggregate
traffic (Cell Loss Priority (CLP) 0+1), in the
receivinG direction, of this Virtual Channel
Link (VCL).
Common Names:
Receive Sustainable Cell Rate (SCR) Aggregate,
Receive SCR Aggregate.
b) The Peak Cell Rate (PCR) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Channel Link (VCL).
Common Names: Receive Peak Cell Rate (PCR)
Cell Loss Priority (CLP) 0,
Receive PCR CLP 0.
c) The Sustainable Cell Rate (SCR) for the Cell Loss
PrioritY (CLP) 0 traffic, in the receiving direction,
of this Virtual Channel Link (VCL).
Common Names: Receive Sustainable Cell Rate (SCR)
Cell Loss Priority (CLP) 0,
Receive SCR CLP 0.
Common Name : PARAM3.ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.4.37.2.1.42 |
adnAtmAccRcvParam4Depending on the value of object
'adnAtmAccTrmTrafficDescrType' this object
adnAtmAccRcvParam4 represents one of the following
values :
a) The Maximum Burst Size (MBS) for the aggregate
traffic (Cell Loss Priority (CLP) 0+1), in the
receiving direction, of this Virtual Channel Link (VCL).
Common Names: Receive Maximum Burst Size (MBS)
Aggregate,
Receive MBS Aggregate.
b) The Maximum Burst Size (MBS) for the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, of this
Virtual Channel Link (VCL).
Common Names: Receive Maximum Burst Size (MBS)
Cell Loss Priority (CLP) 0,
Receive MBS CLP 0.
Common Name : PARAM4.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.4.37.2.1.43 |
adnAtmAccRcvTaggingWhether tagging option is enabled on the Cell Loss Priority
(CLP) 0 traffic, in the receiving direction, when cells are
not conformant, of this Virtual Channel Link (VCL).
Common Name : Cell Tagging Option.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.44 |
adnAtmAccRcvPacketDiscardWhether packet discard option is enabled, in the receiving
direction, of this Virtual Channel Link (VCL). When this
option is enabled all the low priority cells in the
remaining of an ATM Adaptation Layer (AAL) 5 frame are
discarded, as soon as one of the cell of the frame has been
discarded.
Common Name : Tail Packet Discard.ro Enumeration .1.3.6.1.4.1.637.3.1.4.37.2.1.45 |
adnAtmAccClearingCauseATM forum cause value in the cause information
element.
This object is significant when the adnAtmAccCallTerm
is equal to 'terminated'.
Common Name : Clearing Cause.ro INTEGER .1.3.6.1.4.1.637.3.1.4.37.2.1.46 |
adnAtmAccClearingDiagFirst 4 bytes of the ATM forum diagnostic value in the
cause information element.
This object is significant when the adnAtmAccCallTerm
is equal to 'terminated'.
Common Name : Diagnostic Cause.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.4.37.2.1.47 |
adnAtmAccVcDescriptorThis value is a configurable 64 byte identifier
for each ATM and FR Permanent Virtual Circuit (PVC).
When it is not configured, the accounting and
statistical records do not include this object.ro OCTET STRING .1.3.6.1.4.1.637.3.1.4.37.2.1.48 |
adnProprietary OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5 |
adnEquipTableA list of equipment entries. SEQUENCE OF AdnEquipEntry .1.3.6.1.4.1.637.3.1.5.1 |
adnEquipEntryAn equipment entry containing objects that represent
the state of hardware, firmware, or software components.
Currently only hardware components are modelled. AdnEquipEntry .1.3.6.1.4.1.637.3.1.5.1.1 |
adnEquipTypeThe type of component this entry represents.
1 - other 5 - chassis
2 - node 6 - processor
3 - card 7 - iosPort
4 - interface 8 - aeiPortro AdnEquipType .1.3.6.1.4.1.637.3.1.5.1.1.1 |
adnEquipIndexThe index of the component this entry represents.ro INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.2 |
adnEquipSubTypeA more specific indication of the type of component
this entry represents. For example, when adnEquipType
is 'card' adnEquipSubType might be 'adnHbcp8'.
If this information is not present, its value is set
to the OBJECT IDENTIFIER { 0 0 }.
Common name: Typero AutonomousType .1.3.6.1.4.1.637.3.1.5.1.1.3 |
adnEquipLastChangeThe value of sysUpTime at the time the component
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object contains a zero value.
Common name: Last Change Timero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.1.1.4 |
adnEquipInitTimeThe time the component initialized with respect to
the initialization of the local network management
subsystem measured in hundredths of a second. It is
the value of sysUpTime at the time the component
entered the 'enabled' operational state.
If the component initialized prior to the agent's
most recent initialization, this object contains a
zero value.
Common name: Up Sincero TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.1.1.5 |
adnEquipTrapEnableMaskThe value of this object is a bitmap that indicates
which states and statuses should cause an
adnEquipStatusChange trap to be sent.
bit value state/status object (common state name)
-
1 adnEquipX731Oper (operational)
2 adnEquipX731Admin (administrative)
4 adnEquipX731Usage (usage)
8 adnEquipX731Avail (availability)
16 adnEquipInstallStatus (install)
32 adnEquipControlStatus (control)
Common name: Trap Enabledrw INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.6 |
adnEquipX731OperThe value of this object represents the operational state
of this component.
Common name: Operationalro Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.7 |
adnEquipX731AdminThe value of this object represents the administrative state
of this component.
Common name: Administrativerw Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.8 |
adnEquipX731UsageThe value of this object represents the usage state
of this component.
Common name: Usagero Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.9 |
adnEquipX731AvailThe value of this object is a bitmap that qualifies the
value of the operational and administrative states.
When the value of this object is 0, none of the
status conditions are present.
bit
value resource condition
-
1 inTest - undergoing a test procedure
2 failed - has an internal fault preventing its
operation
4 powerOff - requires power, but is not powered on
8 offLine - requires a routine operation to put it
online
16 offDuty - is inactive by an internal control process
32 dependency - cannot operate because it depends on an
unavailable resource
64 degraded - service provided is degraded (speed,
capacity, or etc.)
128 notInstalled - not present or incomplete
256 logFull - for a log only, indicates that it is full
Common name: Availabilityro INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.10 |
adnEquipInstallStatusThe value of this object provides additional information
concerning the availability status (adnEquipX731Avail) of
the equipment. It is a bitmap of installation status
conditions. When the value of this object is 0, none of
the status conditions are present.
bit value meaning qualifies
1 absent 'notInstalled'
2 notConfigured 'notInstalled'
4 initializationIncomplete 'offLine'
128 incorrectConfiguration 'failed'
The following bit positions are deprecated:
bit value meaning qualifies
8 operatorInitiatedLastRestart any setting
16 initializationRequired 'offLine'
32 reservedForTest 'inTest'
64 testInitiated 'inTest'ro INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.11 |
adnEquipControlStatusThis object provides a mechanism for controlling the status
of the equipment. Its value is a bitmap of controls that
determine the value of adnEquipX731Admin. A value of
0 indicates that none of the status controls are in effect.
bit
value meaning
-
1 suspend - put card (except control unit (CU)) in
permanent reset
2 coldRestart - restart equipment, interrupting service
- node and card (except CU) on HSS; node, card
and interface on TPX
4 mildRestart - restart equipment, and do not interrupt
service - only for active or standby CU card
32 initiateTest - begin test - standby CU card only
64 manualSwitchover - switch to backup - primary MSC,
CIG, and BBASE cards and active CU cards only
128 manualSwitchback - switch to primary - primary MSC,
CIG, and BBASE cards only
256 osRebuild - all firmware and disk contents are copied
fromthe active CU card - standby CU card only
The following bit values are deprecated:
value meaning
8 debugModeAfterCrash (do not reload operational
code after crash and allow viewing of
card's data structures)
16 reserveForTestrw INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.12 |
adnEquipControlHistoryThe adnEquipControlHistory object is a bitmap that provides
information about the cause of the last restart, switchover
to spare and switchback to primary. It may be cleared by
setting it to 0; no other SNMP Set operations are allowed.
bit
val meaning
-
1 restartDueToUpdate last restart due to code or
configuration update
2 restartFromOperator operator initiated last restart
4 restartDueToFailure last restart was caused by a
board or node failure
8 restartDueToNode last restart caused by a node
level restart; if not set,
restart was at the board level
16 switchoverFromOperator operator initiated last
switchover
32 switchbackFromOperator operator initiated last
switchbackrw INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.13 |
adnEquipControlOptionsThe adnEquipControlOptions object provides a mechanism for
controlling future reactions of the equipment. It is a
bitmap of options; a value of 0 indicates that no options
are in effect.
bit
value meaning
- -
1 debugAfterCrash - place in debug mode after crash;
do not reload operational code after crash. For
instance, only allow viewing of a card's data
structures)rw INTEGER .1.3.6.1.4.1.637.3.1.5.1.1.14 |
adnEquipSwitchoverOptionsThe adnEquipSwitchoverOptions object provides the options
in effect for the next switchover to spare. It is only
significant for primary equipment; its value is 'noSwitch'
for spares and equipment that does not support redundancy.
other : not used
noSwitch : used for spares and equipment that do not
support redundancy
coldManual : used for primary MSC, CIG and BBASE card
coldAutomatic : used for primary MSC, CIG and BBASE card
warmAutomatic : used for Control Unit and BBSYN card.
The switchover is cold when the software is not already
loaded onto the card; it is the case for MSC coupler,
CIG and BBASE card. Otherwise, the switchover is warm.
With the manual option, the switchover is performed only
on operator request. With the automatic option, the
switchover is performed on HSS supervision software
request when a card is failed or on operator request.rw Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.15 |
adnEquipTrapCauseadnEquipTrapCause contains the value of the adnEquipCause
field in the last trap generated by the equipment. It
indicates the specific cause of the problem that appeared
on the equipment.ro AdnEquipCause .1.3.6.1.4.1.637.3.1.5.1.1.16 |
adnEquipX731StandbyStatusThe adnEquipX731StandbyStatus object describes the role of
spare equipment. In particular, it indicates whether the
equipment is in a standby mode or acting for another piece
of equipment.
coldStandby means that the equipment is not synchronized
with the primary equipment; it requires initialization
before it can take over the role of the primary equipment.ro Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.17 |
adnEquipSwitchbackOptionsThe adnEquipSwitchbackOptions object provides the
options in effect for the next switchback to primary.
It is only significant for primary equipment and if
the adnEquipSwitchoverOptions object is different
from 'noSwitch'.
other : used for configuration purpose when
adnEquipSwitchoverOptions value is 'noSwitch',
also used for Control Unit and BBSYN card.
coldManual : used for primary MSC, CIG and BBASE card.
coldSemiautomatic : used for primary MSC, CIG and BBASE card.
The switchback is cold when the software is not already
loaded onto the card; it is the case for MSC coupler,
CIG and BBASE card.
With the manual option, the switchback is performed only
on operator request. With the semi-automatic option, the
switchover is performed on HSS supervision software
request when the spare card is failed, or on operator
request.rw Enumeration .1.3.6.1.4.1.637.3.1.5.1.1.18 |
adnContainTableA list of container entries. For example, a node contains
chassis. SEQUENCE OF AdnContainEntry .1.3.6.1.4.1.637.3.1.5.2 |
adnContainEntryA container entry representing the containment
relationship between entries in the equipment
table. AdnContainEntry .1.3.6.1.4.1.637.3.1.5.2.1 |
adnContainerTypeThis object corresponds to the adnEquipType of the
container component.ro AdnEquipType .1.3.6.1.4.1.637.3.1.5.2.1.1 |
adnContainerIndexThe value of this object corresponds to the adnEquipIndex
of the container component.
Common name: Equip Indexro INTEGER .1.3.6.1.4.1.637.3.1.5.2.1.2 |
adnContainedTypeThe value of this object corresponds to the adnEquipType
of the contained component.ro AdnEquipType .1.3.6.1.4.1.637.3.1.5.2.1.3 |
adnContainedIndexThe value of this object corresponds to the adnEquipIndex
of the contained component.ro INTEGER .1.3.6.1.4.1.637.3.1.5.2.1.4 |
adnContainerPositionThe value of this object represents the position of the
contained component within the container component.ro INTEGER .1.3.6.1.4.1.637.3.1.5.2.1.5 |
adnNodeTableA list of node entries. SEQUENCE OF AdnNodeEntry .1.3.6.1.4.1.637.3.1.5.3 |
adnNodeEntryAn entry that augments a equipment entry for a node. This
table is based on the system table of MIB-II. AdnNodeEntry .1.3.6.1.4.1.637.3.1.5.3.1 |
adnNodeIndexA unique value for each node in the agent's domain. This
object corresponds to the adnEquipIndex in the equipment
table. Release 2.0 and 2.1 only have one entry in the node
table, but multiple entries may be present for the regional
CU (control unit) environment.
Common name: Node Indexro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.1 |
adnNodeDescrA textual description of the entity. This value
should include the full name and version
identification of the node's hardware type,
software operating system, and networking
software. The value may only contain printable
ASCII characters.
Common names: Node Description, Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.3.1.2 |
adnNodeContactThe textual identification of the contact person
for this managed node, and information on how to contact
the person.
Common name: Contactro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.3.1.3 |
adnNodeNameAn administratively assigned name for this
managed node. By convention, this is the node's
fully qualified domain name.
Common name: Namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.3.1.4 |
adnNodeLocationThe physical location of this node (for example,
`telephone closet, 3rd floor'). This information
helps a service technician find the node.
Common name: Locationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.3.1.5 |
adnNodeServicesA value which indicates the set of services that
this entity primarily offers.
The value is a bitmask where each bit indicates
whether the entity supports the services at the
corresponding protocol stack layer. In the context
of the Internet suite of protocols, values should
be calculated accordingly:
bit layer functionality
1 1 physical (e.g., repeaters)
2 2 datalink/subnetwork (e.g., bridges)
4 3 internet (e.g., IP gateways)
8 4 end-to-end (e.g., IP hosts)
64 7 applications (e.g., mail relays)
For systems including OSI protocols, layers 5 and
6 have the values 16 and 32, respectively.
For example, a node which performs primarily routing
functions would have a value of 4. In contrast, a node
which is an IP host offering application services would
have a value of 72 (72 = 8 + 64).
Common name: Servicesro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.6 |
adnNodeNumPlanThe value of this object identifies the network numbering
plan used for the node's management port.
Common name: Network Planro Enumeration .1.3.6.1.4.1.637.3.1.5.3.1.7 |
adnNodeAddressThe value of this object identifies the network address
of the node's management port.
Common name: IP Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.3.1.8 |
adnNodeClockRefreshThis field indicates the period (in minutes) for
resynchronizing the clock between CU (Control Unit)
and OM (Operations and Maintenance) processors.
Common name: Clock Refreshro INTEGER -- UNITS Minutes .1.3.6.1.4.1.637.3.1.5.3.1.9 |
adnNodeRoutingIDThis field identifies the node for CANP (Cell Alcatel
Network Protocol) and FRANP (Frame Relay Alcatel Network
Protocol) signalling. It is also used by path select,
routing, and FRS (Frame Relay Service) code.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.3.1.10 |
adnNodeMaxChassisThis field indicates the maximum number of chassis that may
be configured in this node. That is, this is the maximum
value of the chassis number. The value of this nominator
depends upon the HSS model.ro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.11 |
adnNodeMachineNumberThe node number inside the area.ro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.12 |
adnNodeAreaNumberThe area number of the node.ro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.13 |
adnNodeNetworkTypeThis field indicates the type of the network.
It is the same for all nodes inside a same network.
This object is used by ATM signalling to fill in the
location field of the CAUSE Information Element in the
release messages.
This object could be used by Frame Relay signalling
as well.ro Enumeration .1.3.6.1.4.1.637.3.1.5.3.1.14 |
adnNodeAtmNetPlossThis value is used for ATM networks.
It is the same for all nodes inside a same network.
This value represents the probability of cell loss
specified by the operator.
It is used by ATM traffic management for non real time
Variable Bit Rate (VBR) connections.
The stored value is the positive value of the decimal
logarithm of this probability.
For example :
5 means that the probability is '10 to the power of -5'.ro INTEGER .1.3.6.1.4.1.637.3.1.5.3.1.15 |
adnNodeConfigFromThis value is used to indicate the origin of the
configuration. In case of configuration from HIT
(HSS Installation Tool) some checks are suppressed.ro Enumeration .1.3.6.1.4.1.637.3.1.5.3.1.16 |
adnProtocols OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.4 |
adnFranpTrunkServiceMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.4.1 |
adnFrtChanTableThis table defines all the channels configured for FRANP
(Frame Relay Alcatel Network Protocol). There is no
existing standard MIB for Alcatel's internal network
protocol. This table is owned by FRANP Signalling
software module. SEQUENCE OF AdnFrtChanEntry .1.3.6.1.4.1.637.3.1.5.4.1.1 |
adnFrtChanEntryAn entry in the channel table. There will be one entry
for each FRANP (Frame Relay Alcatel Network Protocol)
channel configured. AdnFrtChanEntry .1.3.6.1.4.1.637.3.1.5.4.1.1.1 |
adnFrtChanTypeThe value of this object identifies the type of
network interface for this trunk port.
Common Name: FR Trunk Typero Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.1 |
adnFrtChanAddrDLCILenThe value of this object identifies the Q.922
address field length and DLCI (data link connection
identifier) length for this trunk port.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.2 |
adnFrtChanRNodeIDThis is the remote routing node ID.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.4.1.1.1.3 |
adnFrtChanRifIndexThis is the ifIndex of the interface on the remote node
on which this VC is carried. This ifIndex has no local
significance.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.4 |
adnFrtChanBATThis is the bandwidth allocation threshold for the
channel. A value exceeding 80% is not recommended
for sustained traffic loads. The values for
adnFrtChanMaxBcsUser, adnFrtChanMaxBcsNet, and
adnFrtChanMaxBe must be less than or equal to
the value of adnFrtChanBAT.
Common Name: BAT(%)ro AdnPercent -- UNITS Percent .1.3.6.1.4.1.637.3.1.5.4.1.1.1.5 |
adnFrtChanNxOverBcsUserThis indicates the number of times Bcs (statistically
committed data rate) can be over-subscribed for user
traffic on the channel.
Common Name: # Times Over Subscribe Bcs-Userro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.6 |
adnFrtChanNxOverBcsNetThis indicates the number of times Bcs (statistically
committed data rate) can be over-subscribed for net-
work traffic on the channel.
Common Name: # Times Over Subscribe Bcs-Networkro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.7 |
adnFrtChanNxOverBeThis indicates the number of times Be (excess burst data
rate) can be over-subscribed for the channel.
Common Name: # Times Over Subscribe Bero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.8 |
adnFrtChanMaxBcsUserThis field represents the maximum percentage of the
channel bandwidth allowed for Bcs (statistically
committed data rate) users. It is specified as a
percentage of the total bandwidth. It cannot exceed
BAT (bandwidth allocation threshold). Therefore, the
default value for this field should be no more
than the minimum percentage specified for the BAT.
Common Name: Max BW for User Bcs Trafficro AdnPercent .1.3.6.1.4.1.637.3.1.5.4.1.1.1.9 |
adnFrtChanMaxBcsNetThis field represents the maximum percentage of the
channel bandwidth allowed for Bcs (statistically
committed data rate) network traffic. It is specified
as a percentage of the total bandwidth. It cannot exceed
BAT (bandwidth allocation threshold). Therefore, the
default value for this field should be no more
than the minimum percentage specified for the BAT.
Common Name: Max BW for Ntwk Bcs Trafficro AdnPercent .1.3.6.1.4.1.637.3.1.5.4.1.1.1.10 |
adnFrtChanMaxBeThis field represents the maximum percentage of the
channel bandwidth allowed for Be(excess burst data rate).
It is specified as a percentage of the total channel
bandwidth. It cannot exceed BAT (bandwidth allocation
threshold). Therefore, the default value for this
field should be no more than the minimum percentage
specified for the BAT.
Common Name: Max BW for Be Trafficro AdnPercent .1.3.6.1.4.1.637.3.1.5.4.1.1.1.11 |
adnFrtChanMaxCrfThis is the maximum number of user calls
permitted on the trunk.
Common Name: Max Num User Callsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.12 |
adnFrtChanMinDlciThis is the minimum user DLCI (data link connection
identifier) number permitted on the trunk.
Common Name: Min DLCI Numberro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.13 |
adnFrtChanMaxDlciThis is the maximum user DLCI (data link connection
identifier) number permitted on the trunk.
Common Name: Max DLCI Numberro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.14 |
adnFrtChanTotalNumDlciThis is the current number of user DLCI (data link
connection identifier) on the trunk.
Common Name: # VCro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.15 |
adnFrtChanUserNetFlgThis indicates whether the trunk follows the user or
network side of the protocol recommendations.
Common Name: User/Network Protocolro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.16 |
adnFrtChanTPXBc2HSSBcsUsrThis flag indicates the conversion from TPX user Bc
(committed data rate) to HSS user Bcs (statistically
committed data rate) if a channel is configured as a TPX
Interworking Function (IWF) channel. An IWF is a trunk
line connecting a TPX to an HSS.
Common Name: Convert TPX Bc to HSS User Bcsro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.17 |
adnFrtChanTPXBc2HSSBcsNetThis flag indicates the conversion from TPX network Bc
(committed data rate) to HSS user Bcs (statistically
committed data rate) if a channel is configured as a TPX
Interworking Function (IWF) channel. An IWF is a trunk
line connecting a TPX to an HSS.
Common Name: Convert TPX Bc to HSS Ntwk Bcsro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.18 |
adnFrtChanStatisticsThis indicates if statistics are enabled on this channel.
Common Name: Statisticsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.4.1.1.1.19 |
adnFrtChanT303This timer specifies the amount of time to wait for a
setup response. If the timer expires, then the setup
message is retransmitted. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.20 |
adnFrtChanT305This timer specifies the amount of time to wait for a
disconnect response. If the timer expires, then the
release message is transmitted.
The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.21 |
adnFrtChanT308This timer specifies the amount of time to wait for a
release response. If the timer expires the first time,
then the release message is retransmitted. The timer
value is expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.22 |
adnFrtChanT309This data link timer specifies the amount of time to
wait for re-establishment of the LAPD (link access
procedure on the D-channel) message. If the timer
expires, all calls will be cleared. Otherwise, calls in
stable states are not lost. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.23 |
adnFrtChanT310This timer specifies the amount of time to wait for a
Call Proceeding response. If the timer expires, then the
call is cleared by transmitting a disconnect message.
The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.24 |
adnFrtChanT313This timer specifies the amount of time to wait for a
connect response. If the timer expires, then the call
is cleared by transmitting a disconnect message. The
timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.25 |
adnFrtChanT315This timer specifies the amount of time to wait for a
status inquiry response. If the timer expires, then the
call is cleared by transmitting a disconnect message.
The timer value is expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.26 |
adnFrtChanT316This timer specifies the amount of time to wait for a
restart response. If the timer expires, then the restart
message is re-transmitted. The timer value is expressed
in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.27 |
adnFrtChanT317Not used for Release 2.0. Reserved for future use.
This restart confirm timer specifies the amount of time
to wait for clearing all the calls. The timer value is
expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.28 |
adnFrtChanT320Not used for Release 2.0. Reserved for future use.
This inactivity timer specifies the amount of time to
wait for a response to a call. The timer value is
expressed in seconds.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.29 |
adnFrtChanNxOverBeControlThis indicates whether the oversubscription
factor for Be is enabled or disabled. When
disabled, the value for Be is not taken into
account when allocating bandwidth for a call.
Common Name: Be oversubscription factor controlrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.4.1.1.1.30 |
adnFrtChanMonetaryCostadnFrtChanMonetaryCost identifies the
monetary cost of this channel. This is
an arbitrary value and is significant only
in relation to the monetary cost of other
links. The cost is used for route selection.
A value of 0 means that this cost is not
taken into account for route selection
Common name: Monetary Costrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.31 |
adnFrtChanDelayMeasuredThe sum of the transmission and queueing
delays (in milliseconds) measured on this
channel.
Common Name: Measured Delay Costro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.4.1.1.1.32 |
adnFrtChanDelayInUseThe sum of the transmission and queueing
delays (in milliseconds) currently used as
delay cost for this channel.
Common Name: Delay Cost In Userw INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.4.1.1.1.33 |
adnFrtChanDelayReMeasReqRequest for a new delay measurement. When
set to inProgress a new delay measurement is
initiated and the result is stored in the
object adnFrtChanDelayMeasured.rw Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.1.1.34 |
adnFrtChanDefaultCosThe Class of Service that is applied to call with no
Class of Service specified.rw AdnFrCos .1.3.6.1.4.1.637.3.1.5.4.1.1.1.35 |
adnFrtChanPerDlyIntrvThis field defines the periodic delay sampling interval in
seconds. When this interval expires, the line delay will
automatically be measured. A zero value will disable
periodic delay measurments.rw INTEGER -- UNITS second .1.3.6.1.4.1.637.3.1.5.4.1.1.1.36 |
adnFrtChanTotalUsrPVCsUpThis is the current number of user PVCs for which
the value of adnFrtVCOperState is up.
Common Name: # PVCro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.37 |
adnFrtChanTotalUsrSVCsUpThis is the current number of user SVCs for which
the value of adnFrtVCOperState is up.
Common Name: # SVCro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.1.1.38 |
adnFrtChanStatsTableThis table defines all the channel level statistics for
FRANP_SW subsystem. SEQUENCE OF AdnFrtChanStatsEntry .1.3.6.1.4.1.637.3.1.5.4.1.2 |
adnFrtChanStatsEntryAn entry in the channel level statistics table. There
wll be one entry for each FRANP (Frame Relay Alcatel
Network Protocol) channel configured. AdnFrtChanStatsEntry .1.3.6.1.4.1.637.3.1.5.4.1.2.1 |
adnFrtChanStatsCommitEgressThis is the sum of committed egress bandwidth.
Common Name: Commit Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.2 |
adnFrtChanStatsCommitIngressThis is the sum of committed ingress bandwidth.
Common Name: Commit Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.3 |
adnFrtChanStatsOverEgressThis is the sum of overcommitted egress bandwidth.
Common Name: Over Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.4 |
adnFrtChanStatsOverIngressThis is the sum of overcommitted ingress bandwidth.
Common Name: Over Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.5 |
adnFrtChanStatsBcInDiscardsThis is the sum of all of Bc (committed data rate)
sub-frames that were discarded for ingress TPX
IWF (Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).
Common Name: Bc Discards Inro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.6 |
adnFrtChanStatsBcsInDiscardsThis is the sum of all Bcs (statistically committed data
rate) sub-frames that were discarded for ingress TPX
IWF (Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).
Common Name: Bcs Discards Inro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.7 |
adnFrtChanStatsBeInDiscardsThis is the sum of all Be (excess burst data rate)
sub-frames that were discarded for ingress TPX IWF
(Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).
Common Name: Be Discards Inro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.8 |
adnFrtChanStatsBcOutDiscardsThis indicates the sum of Bc (committed data rate)
sub-frames that were discarded for egress traffic
(i.e., TPX Interworking Function, frame relay subsystem,
or frame relay switching interface) due to line
driver transmit queue congestion.
Common Name: Bc Discards Outro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.9 |
adnFrtChanStatsBcsOutDiscardsThis indicates the sum of Bcs (statistically committed
data rate) sub-frames that were discarded for egress
traffic (i.e., TPX Interworking Function, frame relay
subsystem, or frame relay switching interface) due to
line driver transmit queue congestion.
Common Name: Bcs Discards Outro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.10 |
adnFrtChanStatsBeOutDiscardsThis indicates the sum of Be (excess burst data rate)
sub-frames that were discarded for egress traffic (i.e.,
TPX Interworking Function, frame relay subsystem, or
frame relay switching interface) due to line driver
transmit queue congestion.
Common Name: Be Discards Outro Counter .1.3.6.1.4.1.637.3.1.5.4.1.2.1.11 |
adnFrtChanStatsCongsStateThis indicates the congestion level of this channel in
the transmit direction. It monitors the line driver
transmit queue depth.ro AdnCongestLevels .1.3.6.1.4.1.637.3.1.5.4.1.2.1.12 |
adnFrtChanStatsCosRtBcEgressThis is the sum of committed egress bandwidth for Class
of Service RT.
Common Name: Real Time Data Bc Commit Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.13 |
adnFrtChanStatsCosRtBcIngressThis is the sum of committed ingress bandwidth for Class
of Service RT.
Common Name: Real Time Data Bc Commit Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.14 |
adnFrtChanStatsCosNrtBcEgressThis is the sum of committed egress bandwidth for Class
of Service NRT.
Common Name: Non-Real Time Data Bc Commit Egressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.15 |
adnFrtChanStatsCosNrtBcIngressThis is the sum of committed ingress bandwidth for Class
of Service NRT.
Common Name: Non-Real Time Data Bc Commit Ingressro INTEGER (-2147483648..2147483647) -- UNITS bits per second .1.3.6.1.4.1.637.3.1.5.4.1.2.1.16 |
adnFrtVCTableThis is the VC table for FRANP (Frame Relay Alcatel
Network Protocol) trunk protocol.
This table is owned by FRANP Signalling software module. SEQUENCE OF AdnFrtVCEntry .1.3.6.1.4.1.637.3.1.5.4.1.3 |
adnFrtVCEntryVC table entry. AdnFrtVCEntry .1.3.6.1.4.1.637.3.1.5.4.1.3.1 |
adnFrtVCDLCIIndexThe value of this object is equal to the DLCI
(data link connection identifier) value for
the frame relay trunk.
Common Name: Local DLCI INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.1 |
adnFrtVCSetupDirThe direction of the setup message. It can be either
entering the node (ingress) or exiting the node (egress).ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.2 |
adnFrtVCAdminStateThe desired state of the call.
Common Names: Administrative, Status Administrativerw Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.3 |
adnFrtVCOperStateThe current state of the call.
Common Names: Operational, Status Operationalro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.4 |
adnFrtVCForcedPathThis specifies that this VC must take a forced path
through the network.ro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.4.1.3.1.5 |
adnFrtVCTrafficTypeThis indicates if this is a user or network call. The
priority given to each type of call's data in the network
differs: user call priority = customer traffic; network
call priority = network traffic such as alarms,
accounting, and statistics.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.6 |
adnFrtVCStateThis defines the states that are implemented and
supported for the Frame Relay Alcatel Network Protocol
signalling interface on the trunk.ro AdnFrtVCStates .1.3.6.1.4.1.637.3.1.5.4.1.3.1.7 |
adnFrtVCRemoteDlciThis is the ingress DLCI (data link connection identifier)
associated with the VC.
Common Name: Remote DLCIro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.8 |
adnFrtVCRemoteDlciLenThis is the length of the ingress VC's DLCI (data link
connection identifier).ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.9 |
adnFrtVCRemoteifIndexThis is the ifIndex of the interface on the remote node
on which this VC is carried. This ifIndex has no local
significance.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.10 |
adnFrtVCAdjacentNodeIDThis is the routing node ID of the adjacent node to
which the channel carrying this VC is connected.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.4.1.3.1.11 |
adnFrtVCAdjacentifIndexThis is the ifIndex of the interface on the adjacent node
on which this VC is carried. This ifIndex has no local
significance.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.12 |
adnFrtVCBcForwardThis specifies the committed data rate, in bits per
second, in the forward direction. Note that forward
data may be ingress or egress depending on the setting
of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.13 |
adnFrtVCBcBackwardThis specifies the committed data rate, in bits per
second, in the backward direction. Note that backward
data may be ingress or egress depending on the setting
of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.14 |
adnFrtVCBeForwardThis specifies the excessive burst data rate, in bits
per second, in the forward direction. Note that forward
data may be ingress or egress depending on the setting
of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.15 |
adnFrtVCBeBackwardThis specifies the excessive burst data rate, in bits
per second, in the backward direction. Note that
backward data may be ingress or egress depending on the
setting of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.16 |
adnFrtVCBcsForwardThis specifies the statistically committed data rate, in
bits per second, in the forward direction. Note that
forward data may be ingress or egress depending on the
setting of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.17 |
adnFrtVCBcsBackwardThis specifies the statistically committed data rate, in
bits per second, in the backward direction. Note that
backward data may be ingress or egress depending on the
setting of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.18 |
adnFrtVCCirForwardThis specifies the committed information rate, in bits
per second, in the forward direction. Note that forward
data may be ingress or egress depending on the setting
of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.19 |
adnFrtVCCirBackwardThis specifies the committed information rate, in bits
per second, in the backward direction. Note that backward
data may be ingress or egress depending on the setting
of adnFrtVCSetupDir.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.20 |
adnFrtVCDelayCostRemThe delay cost (in milliseconds) allowed
between this node and the destination node for
setting up this PVC.
Common Name: Remaining Delay Costro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.4.1.3.1.21 |
adnFrtVCMonetaryCostRemThe monetary cost allowed between this
node and the destination node for setting
up this VC.
Common Name: Remaining Monetary Costro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.22 |
adnFrtVCHopCostRemThe number of hops allowed between this
node and the destination node for setting
up this VC.
Common Name: Remaining Hop Costro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.1.3.1.23 |
adnFrtVCRoutingModeThe routing mode used for routing this VC.
When best effort is used, routing is done
without regards to the cost requirement.
When best effort is not used, routing must
take into account the cost requirement.
Common Name: Routing Modero Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.24 |
adnFrtVCPathSelectModeThe mode the path selection function must
use to select a path for this VC.
Best available service uses the lowest cost
path(s) which meet the cost requirement as
the primary path. With this approach, the
first calls set up in the network potentially
receive a higher quality service than calls
which happen to arrive later.
Best fit service uses the highest cost path(s)
which meet the cost requirement as the primary
path(s). This approach uses the least
required resources to satisfy the cost
function and conserves the higher quality of
service for those calls which may require
them.
Common Name: Path Selection Modero Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.25 |
adnFrtVCRtsCritIDThe index into adnRtsCritSmryTable
of the routing criteria applied for
this VC.
Common Name: Routing Criteria IDro INTEGER .1.3.6.1.4.1.637.3.1.5.4.1.3.1.26 |
adnFrtVCTypeThis indicates the type of VC for the call.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.1.3.1.27 |
adnFrtVCCosThis indicates the Class of Service for the call.ro AdnFrCos .1.3.6.1.4.1.637.3.1.5.4.1.3.1.28 |
adnFrtVCStatsTableThis is the VC table for the FRANP (Frame Relay Alcatel
Network Protocol) trunk protocol. This table is owned
by FRANP Switching software module. SEQUENCE OF AdnFrtVCStatsEntry .1.3.6.1.4.1.637.3.1.5.4.1.4 |
adnFrtVCStatsEntryAn entry in the VC statistics table. AdnFrtVCStatsEntry .1.3.6.1.4.1.637.3.1.5.4.1.4.1 |
adnFrtVCStatsTimeThe time the VC was initialized.ro AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.5.4.1.4.1.1 |
adnFrtVCStatsSubFrameINThe number of ingress sub-frames for this VC.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.2 |
adnFrtVCStatsSubFrameOUTThe number of egress sub-frames for this VC.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.3 |
adnFrtVCStatsBcOutDiscardsThis indicates the number of Bc (committed data rate)
sub-frames that were discarded for egress traffic
(ie., TPX Interworking Function, frame relay subsystem,
or frame relay switching interface) due to line driver
transmit queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.4 |
adnFrtVCStatsBcsOutDiscardsThis indicates the number of Bcs (statistically
committed data rate) sub-frames that were discarded for
egress traffic (ie., TPX Interworking Function, frame
relay subsystem, or frame relay switching interface)
due to line driver transmit queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.5 |
adnFrtVCStatsBeOutDiscardsThis indicates the number of Be (excess burst data rate)
sub-frames that were discarded for egress traffic
(i.e., TPX Interworking Function, frame relay subsystem,
or frame relay switching interface) due to line driver
transmit queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.6 |
adnFrtVCStatsIWFBcInDiscardsThis indicates the number of Bc (committed data rate)
sub-frames that were discarded for ingress TPX/IWF
(Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.7 |
adnFrtVCStatsIWFBcsInDiscardsThis indicates the number of Bcs (statistically committed
data rate) sub-frames that were discarded for ingress TPX
/IWF (Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.8 |
adnFrtVCStatsIWFBeInDiscardsThis indicates the number of Be (excess burst data rate)
sub-frames that were discarded for ingress TPX/IWF
(Interworking Function) traffic due to calendar queue
congestion. Calendar queue is a mechanism to manage
submission of data into the network based on the SIR
(submission of information rate).ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.9 |
adnFrtVCStatsIWFBcOutDiscardsThis indicates the number of Bc (committed data rate)
sub-frames that were discarded for egress TPX/IWF
(Interworking Function) traffic due to XON/XOFF (flow
control on and flow control off) queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.10 |
adnFrtVCStatsIWFBcsOutDiscardsThis indicates the number of Bcs (statistically committed
data rate) sub-frames that were discarded for egress TPX
/IWF (Interworking Function) traffic due to XON/XOFF
(flow control on and flow control off) queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.11 |
adnFrtVCStatsIWFBeOutDiscardsThis indicates the number of Be (excess burst data rate)
sub-frames that were discarded for egress TPX/IWF
(Interworking Function) traffic due to XON/XOFF
(flow control on and flow control off) queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.4.1.4.1.12 |
adnFrtVCStatsInCongsStateThis indicates the congestion level of this VC in the
ingress direction. This state is based on the amount of
data in the calendar queue, which is a mechanism to
manage submission of data into the network based on the
SIR (submission of information rate).
Common Name: Congestion Levelro AdnCongestLevels .1.3.6.1.4.1.637.3.1.5.4.1.4.1.13 |
adnFrtCosTableThis is the Class of Service table for FRANP trunk protocol. SEQUENCE OF AdnFrtCosEntry .1.3.6.1.4.1.637.3.1.5.4.1.5 |
adnFrtCosEntryClass of Service table entry for FRANP trunk protocol. AdnFrtCosEntry .1.3.6.1.4.1.637.3.1.5.4.1.5.1 |
adnFrtCosIndexThe Cos (Class Of Service) index for a specific class
of service managed by this frame relay interface.ro AdnFrCos .1.3.6.1.4.1.637.3.1.5.4.1.5.1.1 |
adnFrtCosAdminStatusThis object provides a mechanism for controlling the status
of this Class of Service. Set to locked(2) it will cause
any new calls to this Class of Service be rejected. Set to
unlocked(1) it will cause resumption of the normal operation.rw AdnFrCosAdminStatus .1.3.6.1.4.1.637.3.1.5.4.1.5.1.2 |
adnFrtCosOperStatusThis object indicates the operational status of this Class
of Service. A value of locked(2) indicates that any new calls
will be rejected for this Class of Service. A value of unlocked(1)
indicates normal operation.ro AdnFrCosOperStatus .1.3.6.1.4.1.637.3.1.5.4.1.5.1.3 |
adnLapMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.4.2 |
adnLapParamTableThis table contains configurable LAP (link access
procedure) parameters. SEQUENCE OF AdnLapParamEntry .1.3.6.1.4.1.637.3.1.5.4.2.1 |
adnLapParamEntryConfigured parameter values for a specific LAP (link access
procedure). AdnLapParamEntry .1.3.6.1.4.1.637.3.1.5.4.2.1.1 |
adnLapDLCIIndexDLCI (data link connection identifier) index. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.4.2.1.1.1 |
adnLapParamStationTypeIdentifies the desired station type of this interface.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.1.1.2 |
adnLapParamN201FrameSizeThe default maximum N201 information field size
(in number of bits) for a frame the DCE/remote
DTE exchanges with this DTE. This excludes
flags and 0 bits inserted for transparency.ro INTEGER (-2147483648..2147483647) -- UNITS bits .1.3.6.1.4.1.637.3.1.5.4.2.1.1.3 |
adnLapParamKWindowSizeThe default window size for this
interface. This is the maximum number of
unacknowledged sequenced PDUs (protocol data units) that may
be outstanding from this DTE at any one time.ro INTEGER -- UNITS PDUs .1.3.6.1.4.1.637.3.1.5.4.2.1.1.4 |
adnLapParamN200RxmitCountThe default N200 retry counter for this
interface. This specifies the number of
times a PDU (protocol data unit) will be
resent after timer T200 expires without
acknowledging the PDU.ro INTEGER -- UNITS PDU retransmissions .1.3.6.1.4.1.637.3.1.5.4.2.1.1.5 |
adnLapParamT200AckTimerThe default T200 timer for this interface.
This specifies the maximum time (in milliseconds)
to wait for acknowledgment of a PDU (protocol data unit).ro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.4.2.1.1.6 |
adnLapParamT203IdleTimerThe T203 timer for this interface. This
specifies the maximum time (in milliseconds)
to allow without frames being exchanged on
the data link. A value of '2147483647'
indicates that no idle timer is being kept.ro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.4.2.1.1.7 |
adnLapParamProtocolIDThis identifies the protocol to be used on this interface.
Common name: Protocolro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.1.1.8 |
adnLapParamAlarmsEnableIndicates whether or not alarm generation is enabled
for this interface.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.1.1.9 |
adnLapParamPerfEnableIndicates whether or not statistics generation is enabled
for this interface.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.1.1.10 |
adnLapFlowTableThis table defines the objects recorded by
LAP (link access procedure) to provide information about
the traffic flow through the interface. SEQUENCE OF AdnLapFlowEntry .1.3.6.1.4.1.637.3.1.5.4.2.3 |
adnLapFlowEntryThis contains information regarding the effects of
flow controls in LAP (link access procedure). AdnLapFlowEntry .1.3.6.1.4.1.637.3.1.5.4.2.3.1 |
adnLapFlowStateChangesThe number of LAP (link access procedure) state changes,
including resets.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.2 |
adnLapFlowChangeReasonThe reason for the most recent incrementing
of adnlapFlowStateChanges.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.3.1.3 |
adnLapFlowCurrentModeThe current condition of the session.ro Enumeration .1.3.6.1.4.1.637.3.1.5.4.2.3.1.4 |
adnLapFlowBusyDefersThe number of times this device was unable
to transmit a frame due to a perceived
remote busy condition. Busy conditions can
result from the receipt of an RNR (receive not ready)
from the remote device, the lack of valid sequence
number space (window saturation), or other
conditions.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.5 |
adnLapFlowRejOutPktsThe number of REJ (reject) frames sent by
this station.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.6 |
adnLapFlowRejInPktsThe number of REJ (reject) frames received
by this station.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.7 |
adnLapFlowT200TimeoutsThe number of times a transmission was resent
because the T200 timer expired.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.8 |
adnLapFlowT203TimeoutsThe number of times a transmission was resent
because the T203 timer expired.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.9 |
adnLapFlowLinkResetsThe number of times a SABME (set asynchronous balanced
mode extended) was received while this interface was in
data transfer state.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.10 |
adnLapFlowNsErrorsInsThe number of Ns (send sequence number) errors that were
detected on this interface while in data transfer state.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.11 |
adnLapFlowNrErrorsInsThe number of Nr (receive sequence number) errors
that were detected on this interface while in data
transfer state.ro Counter .1.3.6.1.4.1.637.3.1.5.4.2.3.1.12 |
adnLapFlowFrmrSentThe information field of the FRMR (frame reject) most
recently sent. If no FRMR has been sent
(the normal case) or the information is not
available, this will be an OCTET STRING of
zero length.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.4.2.3.1.13 |
adnLapFlowFrmrReceivedThe information field of the FRMR (frame reject) most
recently received. If no FRMR has been
received (the normal case) or the
information is not available, this will be an
OCTET STRING of zero length.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.4.2.3.1.14 |
adnCongMgmtMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.5 |
adnCongMgmtChanTableFrame relay channel information table for congestion
management. SEQUENCE OF AdnCongMgmtChanEntry .1.3.6.1.4.1.637.3.1.5.5.1 |
adnCongMgmtChanEntryAn entry in the frame relay channel information
table. AdnCongMgmtChanEntry .1.3.6.1.4.1.637.3.1.5.5.1.1 |
adnCongMgmtChanCUFValueEquals the current CUF (channel utilization factor)
value of the channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.5.1.1.1 |
adnCongMgmtVCTableVC table for frame relay congestion management. SEQUENCE OF AdnCongMgmtVCEntry .1.3.6.1.4.1.637.3.1.5.5.2 |
adnCongMgmtVCEntryVC table entry. AdnCongMgmtVCEntry .1.3.6.1.4.1.637.3.1.5.5.2.1 |
adnCongMgmtVCDLCIIndexEqual to the DLCI (data link connection identifier) value
for the frame relay trunk or FRS (frame relay subsystem)
local DLCI. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.5.2.1.1 |
adnCongMgmtVCBcInDiscardsNumber of Bc (committed data rate) sub-frames that were
discarded for ingress traffic (TPX interworking
function, frame relay switching interface, or frame relay
subsystem) due to ISM (internal switching mechanism)
queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.2 |
adnCongMgmtVCBcsInDiscardsNumber of Bcs (statistically committed data rate)
sub-frames that were discarded for ingress traffic
(TPX interworking function, frame relay switching
interface, or frame relay subsystem) due to
ISM (internal switching mechanism) queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.3 |
adnCongMgmtVCBeInDiscardsNumber of Be (excess burst data rate) sub-frames that
were discarded for ingress traffic (TPX interworking
function, frame relay switching interface, or frame relay
subsystem) due to ISM (internal switching mechanism)
queue congestion.ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.4 |
adnCongMgmtVCInBcSubfrmSentNumber of Bc (committed data rate) sub-frames sent to the
ISM (internal switching mechanism).ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.5 |
adnCongMgmtVCInBcsSubfrmSentNumber of Bcs (statistically committed data rate)
sub-frames sent to the ISM (internal switching mechanism).ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.6 |
adnCongMgmtVCInBeSubfrmSentNumber of Be (excess burst data rate) sub-frames sent to
the ISM (internal switching mechanism).ro Counter .1.3.6.1.4.1.637.3.1.5.5.2.1.7 |
adnCongMgmtVCInCongsStateCongestion level in the direction of transmit to ISM
(internal switching mechanism).ro AdnCongestLevels .1.3.6.1.4.1.637.3.1.5.5.2.1.8 |
adnCongMgmtVCCurrentSIREquals the current submission rate of this VC, if this
VC belongs to the FRS (frame relay subsystem) channel.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.5.2.1.9 |
adnIsnaMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.6 |
adnIsnaIcTableThis is the internal connection table identifying
connections mapped within the internal subscriber
node administrator (ISNA) and internal subscriber
operation & maintenance (ISOM) software component.
These connections are mapped one-for-one to frame
relay DLCIs defined within the frame relay service
software component. SEQUENCE OF AdnIsnaIcEntry .1.3.6.1.4.1.637.3.1.5.6.1 |
adnIsnaIcEntryInternal connection for internal subscriber subsystem (ISS)
table entry. The adnIsnaIcifIndex and adnIsnaIcDlci used in
this table have the same values as the ones used in the
isom.mib file table adnIsomVcTable. Maintaining the
same values for these objects as in the adnIsomVcTable
provides the definition for a given ISS internal connection. AdnIsnaIcEntry .1.3.6.1.4.1.637.3.1.5.6.1.1 |
adnIsnaIcifIndexThis object defines the first half of an internal subscriber
subsystem internal connection (IC) referenced by an internal
fake line ifIndex. This internal fake line ifIndex is
mapped over common memory between the internal subscriber
on the operation and maintenance processor and the frame
relay service subsystem on the line termination processor.
The value of this object is the same one used in a
corresponding IC entry called adnIsomVcifIndex in the
adnIsomVcTable table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.1.1.1 |
adnIsnaIcDlciThis object defines the second half of an internal
subscriber subsystem internal connection (IC)
referenced by an internal fake line DLCI. This
internal fake line DLCI is mapped over common memory
between the internal subscriber on the operation
and maintenance processor and the frame relay service
subsystem on the line termination processor. The value
of this object is the same one used in a corresponding IC
entry called adnIsomVcoutDlci in the adnIsomVcTable table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.1.1.2 |
adnIsnaIcTypeThis object indicates whether this internal connection will
act as the primary or backup internal connection for another
internal connection.ro Enumeration .1.3.6.1.4.1.637.3.1.5.6.1.1.3 |
adnIsnaIcBckIfindexThis object represents the backup internal connection
ifIndex for a given internal connection defined between
internal subscriber node administrator and internal
subscriber operation and maintenance.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.1.1.4 |
adnIsnaIcBckDlciThis object represents the backup internal connection
data link connection identifier for a given internal
connection defined between internal subscriber node
administrator and internal subscriber operation
maintenance.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.1.1.5 |
adnIsnaIcAdminStateThis object contains the desired state of the internal
subscriber subsystem internal connection.rw Enumeration .1.3.6.1.4.1.637.3.1.5.6.1.1.6 |
adnIsnaIcOperStateThis object contains the current state of the ISS internal
connection.ro Enumeration .1.3.6.1.4.1.637.3.1.5.6.1.1.7 |
adnIsnaRouteIpTableThis is the routing table used by internal subscriber
node administrator to determine to
which internal connection to route a packet received
from the local IP layer. The routing decision is made
based on the destination IP address found in the IP
packet. SEQUENCE OF AdnIsnaRouteIpEntry .1.3.6.1.4.1.637.3.1.5.6.2 |
adnIsnaRouteIpEntryThis field describes IP routes for each entry in the
adnIsnaRouteIpTable. AdnIsnaRouteIpEntry .1.3.6.1.4.1.637.3.1.5.6.2.1 |
adnIsnaRouteifIndexThis object is mapped to adnIsnaIcifIndex in the
adnIsnaIcTable.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.2.1.1 |
adnIsnaRouteDlciThis object is mapped to adnIsnaIcDlci in the
adnIsnaIcTable.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.6.2.1.2 |
adnIsnaRouteIpAddrsDefines the IP address of any host that needs to communicate
with the HSS for network management purposes. This field is
used internally by the internal subscriber subsystem to link
IP addresses to internal subscriber subsystem data
link connection identifiers (DLCI). At a minimum, the IP
address of the A1100 NMS must be entered. Any other hosts
using applications that would access the HSS need their IP
address entered here.ro IpAddress .1.3.6.1.4.1.637.3.1.5.6.2.1.3 |
adnIsnaRouteIpMaskDefines which bits of the IP address are examined in
reading the IP address of any host that needs to
communicate with the HSS. Bit fields in the mask that
are set to '1' cause the address digit to be significant,
bit fields that are set to '0' cause the digit to be
ignored.ro IpAddress .1.3.6.1.4.1.637.3.1.5.6.2.1.4 |
adnIsomMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.7 |
adnIsomVcTableVC table extensions that serve as alternates to the PVC
end-point table in RFC1604, which is not sufficient for
the HSS network. Additionally, the Network Management
System needs to know the identity of the owner of a given
ADN proprietary interface and this is done by utilizing
object adnIfSubType=iss of adnIfTable. SEQUENCE OF AdnIsomVcEntry .1.3.6.1.4.1.637.3.1.5.7.2 |
adnIsomVcEntryVC table entry. AdnIsomVcEntry .1.3.6.1.4.1.637.3.1.5.7.2.1 |
adnIsomVcifIndexThis is the ifIndex of the internal subscriber line
carrying this internal connection.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.7.2.1.1 |
adnIsomVcOutDlciDLCI (Data Link Connection Identifier) for this internal
connection in the direction from the internal subscriber
on the OM (operations and maintenance) processor towards
the FRS (frame relay service) subsystem on the LT (line
termination) processor.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.7.2.1.2 |
adnIsomVcAdminStateDefines the desired state of this internal subscriber
connection.rw Enumeration .1.3.6.1.4.1.637.3.1.5.7.2.1.3 |
adnIsomVcOperStateDefines the current state of this internal subscriber
connection.ro Enumeration .1.3.6.1.4.1.637.3.1.5.7.2.1.4 |
adnIsomVcTimeDefines the time this internal subscriber connection was
initialized.ro AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.5.7.2.1.5 |
adnIsomTrapIpTableThis table contains a list of Network Management System
IP (internet protocol) addresses to which an
adnHSSCuDownTrap should be sent in the event that the
internal subscriber subsystem detects that the CU
(control unit) has gone down. The addresses in this
table must match the entries in the CU relating to
recipients of the adnNodeResync trap. SEQUENCE OF AdnIsomTrapIpEntry .1.3.6.1.4.1.637.3.1.5.7.3 |
adnIsomTrapIpEntryOne or several IP host address entries mapped to a single
DLCI as referenced by ifIndex, adnIsomVcOutDlci, and
adnIsomTrapIpAddrs. AdnIsomTrapIpEntry .1.3.6.1.4.1.637.3.1.5.7.3.1 |
adnIsomTrapifIndexThis object is mapped to 'adnIsomVcifIndex' of
'adnIsomVcTable' table, and is defined similar to the
'adnIsomVcifIndex' entry contained in the adnIsomVcTable
table. Used to address the DLCI that carries SNMP CU down
traps to a defined NMS host.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.7.3.1.1 |
adnIsomTrapDlciMapped to 'adnIsomVcOutDlci' of 'adnIsomVcTable' table,
and is defined similar to 'adnIsomVcOutDlci' entry
contained in the adnIsomVcTable table. Used to address
the DLCI that carries SNMP CU down traps to a defined
(IP host) NMS.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.7.3.1.2 |
adnIsomTrapIpAddrsFull 4-byte NMS IP address that the Internal Subscriber
Operation and maintenance subsystem uses to send a
SNMP CU down trap in the event the node supervision
subsystem reports a CU down condition.ro IpAddress .1.3.6.1.4.1.637.3.1.5.7.3.1.3 |
adnRoutesMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.8 |
adnCalcMonTableGeneral parameters used by the routing
services for node-to-path table calculation.deprecated SEQUENCE OF AdnCalcMonEntry .1.3.6.1.4.1.637.3.1.5.8.1 |
adnCalcMonEntryEach entry (row) of the adnCalcMonTable
provides the general parameters used by '
the routing services for node-to-path
table calculation for a specific type of
service and criterion.deprecated AdnCalcMonEntry .1.3.6.1.4.1.637.3.1.5.8.1.1 |
adntosIndexType of service: frame relay, ATM virtual
channel, ATM virtual path, etc.deprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.1.1.1 |
adncriterionIndexRule used to generate a routing table
based on the link cost metrics.deprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.1.1.2 |
adnMaxPathMaximum number of paths per node in the
node-to-path routing table for a specific
type of service and criterion.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.1.1.3 |
adnMaxCostMaximum cost of a path to an arbitrary
destination node for a type of service
and criterion. If the criterion is the
number of hops, maximum number of hops.
The default value is defined for a criterion
equal to the number of hops.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.1.1.4 |
adnMinTimeBetCalcMinimum time between successive route
calculations for a specific type of
service and criterion and identifies
the minimum time between completion
of routing services initialization
and the first routing calculation.rwdeprecated INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.1.1.5 |
adnMessMonTableGeneral parameters used by the routing
services for routing message handling.deprecated SEQUENCE OF AdnMessMonEntry .1.3.6.1.4.1.637.3.1.5.8.2 |
adnMessMonEntryEach entry (row) of the adnMessMonTable
provides the general parameters used by
the routing services for routing message
handling for a specific type of service.deprecated AdnMessMonEntry .1.3.6.1.4.1.637.3.1.5.8.2.1 |
adnMinTimeBetLSMinimum time between self-generated
link state messages for the node.rodeprecated INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.2.1.1 |
adnbroadcastLSUIf active, a trigger for a one shot link
state update broadcast for this node. The
status is reset to inactive when done.rwdeprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.2.1.2 |
adnLSUbroadcastfreezStatus of the link state update processing.
When the status is active, no link
state update for the node is broadcast for a
period of time.rwdeprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.2.1.3 |
adnTblDistfreezStatus of the table distribution processor.
When the status is active, the table
distributions sent to a coupler card are frozen.rwdeprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.2.1.4 |
adnManNPhdrTableInformation about the headers of the
manual node-to-path tables for all
types of service and criteria.deprecated SEQUENCE OF AdnManNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.3 |
adnManNPhdrEntryEach row provides information about the
header of a specific manual node-to-path table.deprecated AdnManNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.3.1 |
adnManNPhdrVerVersion number of the manual node-to-path table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.3.1.1 |
adnManNPhdrStampTime-of-day stamp of the manual node-to-path table.rodeprecated AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.5.8.3.1.2 |
adnManNPhdrNumNumber of destination node entries in the manual
node-to-path table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.3.1.3 |
adnManNPPathhdrTableDefines access to information in the
destination node entry headers (Dnode
headers) of the manual node-to-path
table on the control unit. Dnode header
of a node-to-path table entry gives summary
information about the routing to that Dnode.
See the associated adnManNPpthTable for path
information associated with each Dnode header
of the adnManNPPathhdrTable.deprecated SEQUENCE OF AdnManNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.4 |
adnManNPPathhdrEntryEach entry (row) in the adnManNPPathhdrTable
provides all the information found in a table
entry's header of the manual node-to-path table
on the control unit.deprecated AdnManNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.4.1 |
adnManDnodeIndexA destination node ID identifies an entry in the
node-to-path table. HSS routing services treats a
node ID.deprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.4.1.1 |
adnManNPhdrNumPthNumber of separate paths from the current node to
the destination node; note that each path is
uniquely associated with an adjacent node.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.4.1.2 |
adnManRemNodeMacNumThe machine number part of adnManDnodeIndex,
the routing node ID of the node at the remote
endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.4.1.3 |
adnManRemNodeAreaNumThe area number part of adnManDnodeIndex,
the routing area number of the node at the
remote endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.4.1.4 |
adnManNPpthTableDefines access to path information in a
destination node entry of the manual node-to-path
table on the control unit.deprecated SEQUENCE OF AdnManNPpthEntry .1.3.6.1.4.1.637.3.1.5.8.5 |
adnManNPpthEntryEach entry (row) in the adnManNPpthTable
provides all the information in a particular
path entry of the manual node-to-path table
on the control unit.deprecated AdnManNPpthEntry .1.3.6.1.4.1.637.3.1.5.8.5.1 |
adnManPathIndexNumber that identifies path order: first, second,
third, etc. Number of paths in an node-to-path
table entry is variable.deprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.5.1.1 |
adnManNPpthCostCost of getting to the destination from this
node using this path.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.5.1.2 |
adnManNPpthAJidThe node identifier of an adjacent node to which this
node is connected, effectively the first hop of a route
to the destination node.rodeprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.5.1.3 |
adnManNPpthIpAdrThe IP address of the destination node.rodeprecated IpAddress .1.3.6.1.4.1.637.3.1.5.8.5.1.4 |
adnCurNPhdrTableInformation about the headers of the automatically
built node-to-path tables, for all the types of
service and criteria. These tables are used
for establishing calls within the network.deprecated SEQUENCE OF AdnCurNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.6 |
adnCurNPhdrEntryEach row provides information about the header of a
specific automatically built node-to-path table.deprecated AdnCurNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.6.1 |
adnCurNPhdrVerVersion number of the current node-to-path table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.6.1.1 |
adnCurNPhdrStampTime-of-day stamp of the current node-to-path table.rodeprecated AdnNodeTimeStamp -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.6.1.2 |
adnCurNPhdrNumNumber of destination node
entries in the current node-to-path table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.6.1.3 |
adnCurNPPathhdrTableDefines access to information in
the destination node entry headers of the current
node-to-path table on the control unit.
A destination node header of a node-to-path table entry
gives summary information about that destination node's
routing status.
See the associated adnCurNPpthTable for the path
information associated with each Dnode of the
adnCurNPPathhdrTable.deprecated SEQUENCE OF AdnCurNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.7 |
adnCurNPPathhdrEntryEach entry (row) in the adnCurNPPathhdrTable provides all
the information found in a table entry's header of the
current node-to-path table on the control unit.deprecated AdnCurNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.7.1 |
adnCurDnodeIndexA destination node ID identifies an entry in the
node-to-path table.deprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.7.1.1 |
adnCurNPhdrIpAdrThe IP address of the adjacent node.rodeprecated IpAddress .1.3.6.1.4.1.637.3.1.5.8.7.1.2 |
adnCurNPhdrNumPthNumber of paths indicates the number of separate
paths from the current node to the destination node;
note that each path is uniquely associated with an
adjacent node.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.7.1.3 |
adnCurRemNodeMacNumThe machine number part of adnCurDnodeIndex,
the routing node ID of the node at the remote
endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.7.1.4 |
adnCurRemNodeAreaNumThe area number part of adnCurDnodeIndex,
the routing area number of the node at the
remote endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.7.1.5 |
adnCurNPpthTableDefines access to path information in
a destination node entry of a current node-to-path
table on the control unit.deprecated SEQUENCE OF AdnCurNPpthEntry .1.3.6.1.4.1.637.3.1.5.8.8 |
adnCurNPpthEntryEach entry (row) in the adnCurNPpthTable provides all
the information in a particular path entry of the current
node-to-path table on the control unit.deprecated AdnCurNPpthEntry .1.3.6.1.4.1.637.3.1.5.8.8.1 |
adnCurPathIndexNumber that identifies path order: first, second,
third, etc.
Number of paths in a node-to-path table entry is variable.deprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.8.1.1 |
adnCurNPpthCostThe cost of getting to the destination from this
node using this path.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.8.1.2 |
adnCurNPpthAJidAn adjacent node to which this node is
connected.rodeprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.8.1.3 |
adnManAjhdrTableInformation about the headers of the manual
adjacency tables for all types of service.deprecated SEQUENCE OF AdnManAjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.9 |
adnManAjhdrEntryEach entry (row) provides the information about a
header of a specific manual adjacency table.deprecated AdnManAjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.9.1 |
adnManAjhdrVerVersion number of the manual adjacency table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.9.1.1 |
adnManAjhdrStampTime-of-day stamp of the manual adjacency table.rodeprecated AdnNodeTimeStamp -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.9.1.2 |
adnManAjhdrNumNumber of adjacent node
entries in the manual adjacency table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.9.1.3 |
adnManAjLinehdrTableReferences to the HSS routing services manual
adjacency table on the control unit, used to keep track
of adjacent connections, particularly for purposes of
load balancing. Node-to-path table path entries reference
the adjacency table. The adjacency header table provides
access to the information in the adjacency table
entry headers. See the adnManAjLineTable for individual
lines associated with a particular adjacent node, header.deprecated SEQUENCE OF AdnManAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.10 |
adnManAjLinehdrEntryEach entry (row) in the adnManAjLinehdrTable
provides key information about a particular adjacent node.deprecated AdnManAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.10.1 |
adnManAnodeIndexEach adjacent node ID identifies an entry in the adjacency
table.deprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.10.1.1 |
adnAJManNumLinesCount of the available logical lines in the connection
to this adjacent node.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.10.1.2 |
adnManAjNodeMacNumThe machine number part of adnManAnodeIndex,
the routing node ID of the node at the remote
endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.10.1.3 |
adnManAjNodeAreaNumThe area number part of adnManAnodeIndex,
the routing area number of the node at the
remote endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.10.1.4 |
adnManAjLineTableAccess to the
line level information in the adjacency table for each
adjacent node entry. This table is related to the
adnManAjhdrTable, and refers only to the control unit.deprecated SEQUENCE OF AdnManAjLineEntry .1.3.6.1.4.1.637.3.1.5.8.11 |
adnManAjLineEntryEach entry (row) in the adnManAjLineTable
provides key information about a particular logical
line (channel) to the adjacent node.deprecated AdnManAjLineEntry .1.3.6.1.4.1.637.3.1.5.8.11.1 |
adnAJManLocIfIndexIdentifies, uniquely within a node, a network interface.deprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.11.1.1 |
adnAJManMetricCost1Cost in Metric 1 for a particular logical
line entry with a specific type of service.deprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.11.1.2 |
adnAJManMetricCost2Cost in Metric 2 for a particular logical
line entry with a specific type of service.deprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.11.1.3 |
adnAJManMetricCost3Cost in Metric 3 for a particular logical
line entry with a specific type of service.deprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.11.1.4 |
adnAJManRemIfIndexUniquely identifies a network interface within the
HSS remote node.
If the remote node is a TPX, this object identifies
the T1 interface
identifier.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.11.1.5 |
adnCurAjhdrTableInformation about the headers of the learned
adjacency tables for all types of service.deprecated SEQUENCE OF AdnCurAjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.12 |
adnCurAjhdrEntryEach row provides information about a header of a specific
learned adjacency table.deprecated AdnCurAjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.12.1 |
adnCurAjhdrVerVersion number of a learned adjacency table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.12.1.1 |
adnCurAjhdrStampTime-of-day stamp of a learned adjacency table.rodeprecated AdnNodeTimeStamp -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.12.1.2 |
adnCurAjhdrNumNumber of adjacent node
entries in a learned adjacency table.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.12.1.3 |
adnCurAjLinehdrTableRefers to the HSS routing services current adjacency
table on the control unit used to track adjacent
connections, particularly for purposes of load balancing.
Node-to-path table path entries reference the adjacency
table. The adjacency header table provides access to the
information in the adjacency table entry headers.
See the related AdnCurAjLineTable for individual
lines associated with a particular adjacent node header.deprecated SEQUENCE OF AdnCurAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.13 |
adnCurAjLinehdrEntryEach entry (row) in the adnCurAjLinehdrTable
provides key information about a particular adjacent node.deprecated AdnCurAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.13.1 |
adnCurAnodeIndexEach adjacent node ID identifies an entry in the
adjacency table. Routing services treats a node ID
as an unsigned 32-bit integer.deprecated AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.13.1.1 |
adnAJCurNodetypeNode type can be TPX or HSS. Commonly used to distinguish
interworking characteristics.rodeprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.13.1.2 |
adnAJCurNumLinesNumber of available logical lines (channels) in the
connection to this adjacent node.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.13.1.3 |
adnAJCurNxtLineSpecifies the next logical line to be used for routing
message traffic; allows HSS routing services to spread
the routing message traffic over all logical lines
comprising the connection.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.8.13.1.4 |
adnAJNStateIdentifies a state that governs HSS routing services
adjacency formation.rodeprecated Enumeration .1.3.6.1.4.1.637.3.1.5.8.13.1.5 |
adnCurAjNodeMacNumThe machine number part of adnCurAnodeIndex,
the routing node ID of the node at the remote
endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.13.1.6 |
adnCurAjNodeAreaNumThe area number part of adnCurAnodeIndex,
the routing area number of the node at the
remote endpoint.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.13.1.7 |
adnCurAjLineTableGives access to the
line level information in the adjacency table for
each adjacent node entry. This table is related to the
adnCurAjhdrTable and refers only to the control unit.deprecated SEQUENCE OF AdnCurAjLineEntry .1.3.6.1.4.1.637.3.1.5.8.14 |
adnCurAjLineEntryEach entry (row) in the adnCurAjLineTable
provides key information about a particular logical
line (channel) to the adjacent node.deprecated AdnCurAjLineEntry .1.3.6.1.4.1.637.3.1.5.8.14.1 |
adnAJCurLocIfIndexUniquely identifies a network interface within a node.deprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.14.1.1 |
adnAJCurMetricCost1Cost in Metric 1 for a particular logical
line entry with a specific type of service.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.14.1.2 |
adnAJCurMetricCost2Cost in Metric 2 for a particular logical
line entry with a specific type of service.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.14.1.3 |
adnAJCurMetricCost3Cost in Metric 3 for a particular logical
line entry with a specific type of service.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.14.1.4 |
adnAJCurRemIfIndexUniquely identifies a network interface within the
HSS remote node. If the remote node is a TPX, this
object identifies the T1 interface
identifier.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.14.1.5 |
adnLahdrTableProvides information about the headers of the
local address table separate for each numbering plan. SEQUENCE OF AdnLahdrEntry .1.3.6.1.4.1.637.3.1.5.8.15 |
adnLahdrEntryEach entry (row) provides information about a header
of a specific numbering plan local address table. AdnLahdrEntry .1.3.6.1.4.1.637.3.1.5.8.15.1 |
adnNumPlanIndexType of address; for example, X.121. AdnRoutesNumPlan .1.3.6.1.4.1.637.3.1.5.8.15.1.1 |
adnLahdrVerLocal Address header version number.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.15.1.2 |
adnLahdrStampTime-of-day stamp of the local address table.ro AdnNodeTimeStamp .1.3.6.1.4.1.637.3.1.5.8.15.1.3 |
adnLahdrNumNumber of address entries in the local address table.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.15.1.4 |
adnLaTableRepresents the HSS routing services local address
table on the control unit and provides access to information
used to complete call routing to an access point within the
current node.deprecated SEQUENCE OF AdnLaEntry .1.3.6.1.4.1.637.3.1.5.8.16 |
adnLaEntryEach entry (row) in the adnLaTable maps
a (local) address supported in the node to its
internal identifier.deprecated AdnLaEntry .1.3.6.1.4.1.637.3.1.5.8.16.1 |
adnLaAdIndexAddress, maintained as ASCII decimal.deprecated OCTET STRING .1.3.6.1.4.1.637.3.1.5.8.16.1.1 |
adnLaIfIndexInterface number at the routing completion point.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.16.1.2 |
adnAnhdrTableInformation about the headers of the
address-to-node table for each numbering plan. SEQUENCE OF AdnAnhdrEntry .1.3.6.1.4.1.637.3.1.5.8.17 |
adnAnhdrEntryEach row provides information about a header of a specific
numbering plan table. AdnAnhdrEntry .1.3.6.1.4.1.637.3.1.5.8.17.1 |
adnAnhdrNumPlanIndexType of address; for example, X.121. AdnRoutesNumPlan .1.3.6.1.4.1.637.3.1.5.8.17.1.1 |
adnAnhdrVerVersion number of the address-to-node mapping table.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.17.1.2 |
adnAnhdrStampTime-of-day stamp of the address-to-node mapping table.ro AdnNodeTimeStamp -- UNITS second .1.3.6.1.4.1.637.3.1.5.8.17.1.3 |
adnAnhdrNumNumber of address entries in the address-to-node
mapping table.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.17.1.4 |
adnAnTableHSS routing services address-to-node mapping
table on the control unit.
The address-to-node table records the node(s) in the network
that supports the specified address.
This table is used only by the frame relay type of service. SEQUENCE OF AdnAnEntry .1.3.6.1.4.1.637.3.1.5.8.18 |
adnAnEntryEach entry (row) in the adnAnTable that maps
an address supported in the network to the node(s) where
it is supported. An address may be supported multiple
times. AdnAnEntry .1.3.6.1.4.1.637.3.1.5.8.18.1 |
adnAnNumPlanIndexType of address; for example, X.121. AdnRoutesNumPlan .1.3.6.1.4.1.637.3.1.5.8.18.1.1 |
adnAnAdIndexTarget address, maintained as ASCII decimal. OCTET STRING .1.3.6.1.4.1.637.3.1.5.8.18.1.2 |
adnAnNodeIndexNode ID for a specific node which supports the
target address. Since a single target address
may be supported by more than one node (several
service-gateway nodes for instance), there
should be a separate entry for each one.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.18.1.3 |
adnAnRankRank (cost order) of the node ID to reach the address.
The rank of the entry with the lowest cost is 1.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.18.1.4 |
adnAnNodeMacNumThe machine number part of adnAnNodeIndex,
the routing node ID of the node at the remote
endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.18.1.5 |
adnAnNodeAreaNumThe area number part of adnAnNodeIndex,
the routing area number of the node at the
remote endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.18.1.6 |
adnAnPartialAddrFlagWhen a sequence of addresses is homing through
a single gateway (Gateway 1), a user can enter
a partial address by setting Partial Address Flag
to `YES' to support the entire range of addresses.
E.g.: 31103600 to 31103699 are going to Gateway 1.
User can enter 311036 to Gateway 1 with
adnAnPartialAddrFlag `yes'.ro Enumeration .1.3.6.1.4.1.637.3.1.5.8.18.1.7 |
adnAnAddrLengthThe number of digits in the Address that is
supported by network.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.18.1.8 |
adnStatsNodeTableStatistics node table that gives access to
node level information.deprecated SEQUENCE OF AdnStatsNodeEntry .1.3.6.1.4.1.637.3.1.5.8.19 |
adnStatsNodeEntryEach entry (row) in the adnStatsNodeTable
provides node level statistics.deprecated AdnStatsNodeEntry .1.3.6.1.4.1.637.3.1.5.8.19.1 |
adnStatsTotLSUThe number of link state update messages received from the
specified node.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.19.1.1 |
adnStatsTotDupLSUThe number of duplicate link state update messages,
received from the specified node, that were discarded.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.19.1.2 |
adnStatsTotOldLSUThe number of link state update messages received
from the specified node, that were too old and had
to be discarded.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.19.1.3 |
adnRtsCritCountGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.8.20 |
adnRtsCritCountThe number of entries in the criterion cost summary table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.20.1 |
adnRtsCritSmryTableThis table summarizes each supported criterion cost, giving
the ID (unique identifier) and the order and IDs of
the three cost metrics that comprise the criterion cost. SEQUENCE OF AdnRtsCritSmryEntry .1.3.6.1.4.1.637.3.1.5.8.21 |
adnRtsCritSmryEntryAn entry in the routing criteria summary table. Each entry
represents a particular routing criterion.
For a routing criterion consisting of the ordered set of
metric types { metric1, metric2, metric3 } registered as
{ adnRoutingCriteria n }, the object adnRtsCritID
will have the value 'n', adnRtsCritOID will have
the value '{ adnRoutingCriteria n }',
adnRtsCritMetricHigh will have the value 'metric1',
adnRtsCritMetricMid will have the value 'metric2'
and adnRtsCritMetricLow will have the value 'metric3'. AdnRtsCritSmryEntry .1.3.6.1.4.1.637.3.1.5.8.21.1 |
adnRtsCritIDThe entry number for this entry in this criterion
cost summary table. This value ranges from 1 to the
value of adnRtsCritCount and is equal to the rightmost
sub-identifier of the corresponding adnRtsCritOID value. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.21.1.1 |
adnRtsCritOIDThe routing criterion object identifier corresponding to
adnRtsCritID.ro AdnRoutingCriteriaType .1.3.6.1.4.1.637.3.1.5.8.21.1.2 |
adnRtsCritMetricHighThe highest priority routing metric type of this
routing criterion cost type.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.21.1.3 |
adnRtsCritMetricMidThe second highest priority routing metric type in
this routing criterion cost type.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.21.1.4 |
adnRtsCritMetricLowThe third highest priority routing metric type in
this routing criterion cost type.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.21.1.5 |
adnCalcCtlTableGeneral parameters used by the routing
services for node-to-path table calculation. SEQUENCE OF AdnCalcCtlEntry .1.3.6.1.4.1.637.3.1.5.8.22 |
adnCalcCtlEntryEach entry (row) of the adnCalcCtlTable provides the
general parameters used by the routing services for
node-to-path table calculation for a specific type of
service and criterion.
Note that there are 3 metric types known in R 2.2.
Additional metric types may be added at the end of the
entry, as future requirements dictate. AdnCalcCtlEntry .1.3.6.1.4.1.637.3.1.5.8.22.1 |
adnTosIndexType of service: frame relay, ATM virtual channel,
ATM virtual path, etc. Enumeration .1.3.6.1.4.1.637.3.1.5.8.22.1.1 |
adnMaxNumPathMaximum number of paths to be presented in the
node-to-path routing table, for a given destination node,
for a specific type of service and criterion.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.2 |
adnMinTimeBtwCalcMinimum time between successive route calculations
for a specific type of service and criterion.rw INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.22.1.3 |
adnMetricDefHighThe high priority default cost metric value used for the
specified Type Of Service (TOS), criterion. The default
value is set up at initialization. Thus, initially,
'adnMetricMaxHigh' is equal to 'adnMetricDefHigh'. This
'adnMetricDefHigh' allows easy recall of exactly what the
default value is.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.4 |
adnMetricMaxHighThe current maximum value for the high priority
cost metric value. Initialized to a release
specific default, SNMP changeable. The value of
the object 'adnMetricMaxHigh' is what is actually
used by the routing software. A key use is to
identify calculated paths 'too costly' to be
considered.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.5 |
adnMetricDefMidThe mid-priority default cost metric value used for the
specified Type Of Service (TOS), criterion. The default
value is set up at initialization. Thus, initially,
'adnMetricMaxMid' is equal to 'adnMetricDefMid'. This
'adnMetricDefMid' allows easy recall of exactly what the
default value is.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.6 |
adnMetricMaxMidThe current maximum value for the mid-priority
cost metric value. Initialized to a release
specific default, SNMP changeable. The value
of the object 'adnMetricMaxMid' is what is
actually used by the routing software. A key
use is to identify calculated paths 'too costly'
to be considered.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.7 |
adnMetricDefLowThe low-priority default cost metric value used for the
specified Type Of Service, criterion. The default value
is set up at initialization. Thus, initially,
'adnMetricMaxLow' is equal to 'adnMetricDefLow'. This
'adnMetricDefLow' allows easy recall of exactly what the
default value is.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.8 |
adnMetricMaxLowThe current maximum value for the low-priority cost metric
value. Initialized to a release specific default, SNMP
changeable. The value of the object 'adnMetricMaxLow' is
what is actually used by the routing software. A key use is
to identify calculated paths 'too costly' to be considered.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.22.1.9 |
adnNPhdrTableInformation about the headers of the automatically
built node-to-path tables, for all the types of
service and criteria. These tables are used
for establishing calls within the network. SEQUENCE OF AdnNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.23 |
adnNPhdrEntryEach row provides information about the header of a
specific automatically built node-to-path table. AdnNPhdrEntry .1.3.6.1.4.1.637.3.1.5.8.23.1 |
adnNPhdrVerVersion number of the current node-to-path table.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.23.1.1 |
adnNPhdrStampTime-of-day stamp of the current node-to-path table.ro AdnNodeTimeStamp -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.23.1.2 |
adnNPhdrNumNumber of destination node
entries in the node-to-path table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.23.1.3 |
adnNPPathhdrTableDefines access to information in the destination node
entry headers of the node-to-path table on the control
unit. A destination node header of a node-to-path table
entry gives summary information about that destination
node's routing status. See the associated adnNodePathTable
for the path information associated with each destination
node of the adnNPPathhdrTable. SEQUENCE OF AdnNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.24 |
adnNPPathhdrEntryEach entry (row) in the adnNPPathhdrTable provides all
the information found in a table entry's header of the
current node-to-path table on the control unit. AdnNPPathhdrEntry .1.3.6.1.4.1.637.3.1.5.8.24.1 |
adnDnodeIndexA destination node ID identifies an entry in the
node-to-path table. AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.24.1.1 |
adnNPhdrIpAdrThe IP address of the adjacent node.ro IpAddress .1.3.6.1.4.1.637.3.1.5.8.24.1.2 |
adnNPhdrNumPthNumber of separate paths from the current node to the
destination node; note that each path is uniquely
associated with an adjacent node.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.24.1.3 |
adnRemNodeMacNumThe machine number part of adnDnodeIndex,
the routing node ID of the node at the remote
endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.24.1.4 |
adnRemNodeAreaNumThe area number part of adnDnodeIndex, the routing
area number of the node at the remote endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.24.1.5 |
adnNodePathTableDefines access to path information in
a destination node entry of a current node-to-path
table. SEQUENCE OF AdnNodePathEntry .1.3.6.1.4.1.637.3.1.5.8.25 |
adnNodePathEntryEach entry (row) in the adnNodePathTable provides all the
information in a particular path entry of the current
node-to-path table on the control unit. AdnNodePathEntry .1.3.6.1.4.1.637.3.1.5.8.25.1 |
adnNodePathIndexNumber that identifies path order: first, second,
third, etc. Number of paths in a node-to-path table
entry is variable. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.1 |
adnNodePathAdjNodeIDAn adjacent node to which this node is
connected.ro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.25.1.2 |
adnNodePathCostHighThe high priority cost metric value for getting
to this destination node using this path from
'adnNodePathAdjNodeID' node using this path.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.3 |
adnNodePathCostMidThe middle priority cost metric value for getting
to this destination node using this path from
'adnNodePathAdjNodeID' node using this path.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.4 |
adnNodePathCostLowThe lowpriority cost metric value for getting
to this destination node using this path from
'adnNodePathAdjNodeID' node using this path.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.5 |
adnNodePathRemNodeMacNumThe machine number part of adnNodePathAdjNodeID, the
routing node ID of the node at the remote endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.6 |
adnNodePathRemNodeAreaNumThe area number part of adnNodePathAdjNodeID, the routing
node ID of the node at the remote endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.25.1.7 |
adnAdjhdrTableInformation about the headers of the learned
adjacency tables for all types of service. SEQUENCE OF AdnAdjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.26 |
adnAdjhdrEntryEach row provides information about a header of a specific
learned adjacency table. AdnAdjhdrEntry .1.3.6.1.4.1.637.3.1.5.8.26.1 |
adnAdjhdrVerVersion number of a learned adjacency table. These
numbers start at 1 and continue upwards - allows
distinguishing older from newer copies.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.26.1.1 |
adnAdjhdrStampTime-of-day stamp of a learned adjacency table.ro AdnNodeTimeStamp -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.26.1.2 |
adnAdjhdrNumNumber of adjacent node
entries in a learned adjacency table.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.26.1.3 |
adnAdjLinehdrTableRefers to the HSS routing services learned adjacency
table on the control unit used to track adjacent
connections, particularly for purposes of load balancing.
Node-to-path table path entries reference the adjacency
table. The adjacency header table provides access to the
information in the adjacency table entry headers.
See the related AdnAjLineTable for individual
lines associated with a particular adjacent node header. SEQUENCE OF AdnAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.27 |
adnAjLinehdrEntryEach entry (row) in the adnAdjLinehdrTable
provides key information about a particular adjacent node. AdnAjLinehdrEntry .1.3.6.1.4.1.637.3.1.5.8.27.1 |
adnAnodeIndexEach adjacent node ID identifies an entry in the
adjacency table. AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.27.1.1 |
adnAdjNodetypeNode type can be TPX or HSS. Commonly used to distinguish
interworking characteristics.ro Enumeration .1.3.6.1.4.1.637.3.1.5.8.27.1.2 |
adnAdjNumLinesNumber of available logical lines (channels) in the
connection to this adjacent node.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.27.1.3 |
adnAdjNxtLineSpecifies the next logical line to be used for routing
message traffic; allows HSS routing services to spread
the routing message traffic over all logical lines
comprising the connection.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.27.1.4 |
adnAdjNodeStateIdentifies a state that governs HSS routing services
adjacency formation.ro Enumeration .1.3.6.1.4.1.637.3.1.5.8.27.1.5 |
adnAdjRemNodeMacNumThe machine number part of adnAnodeIndex,
the routing node ID of the node at the remote
endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.27.1.6 |
adnAdjRemNodeAreaNumThe area number part of adnAnodeIndex, the routing
area number of the node at the remote endpoint.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.27.1.7 |
adnAdjTpxAddrThe adjacent TPX node's x121 Address. If adnAdjNodetype
is not TPX the address is 00000....ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.8.27.1.8 |
adnAdjhdrIpAdrThe IP address of the adjacent node. If the adjacent node
does not have IP address then the value is 0.0.0.0ro IpAddress .1.3.6.1.4.1.637.3.1.5.8.27.1.9 |
adnAdjLineTableProvides access to the
line level information in the adjacency table for
each adjacent node entry. SEQUENCE OF AdnAdjLineEntry .1.3.6.1.4.1.637.3.1.5.8.28 |
adnAdjLineEntryEach entry (row) in the adnAdjLineTable
provides key information about a particular logical
line (channel) to the adjacent node. AdnAdjLineEntry .1.3.6.1.4.1.637.3.1.5.8.28.1 |
adnAdjLocIfIndexUniquely identifies a network interface within a node. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.8.28.1.1 |
adnAdjRemIfIndexUniquely identifies a network interface within the
remote node. If the remote node is a TPX, this
object identifies the T1 interface identifier.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.8.28.1.2 |
adnAdjMetricIDHighHigh priority cost metric ID for this link entry.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.28.1.3 |
adnAdjMetricCostHighHigh priority cost metric for this link entry.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.28.1.4 |
adnAdjMetricIDMidMid priority cost metric ID for this link entry.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.28.1.5 |
adnAdjMetricCostMidMid priority cost metric for this link entry.ro INTEGER (-2147483648..2147483647) -- UNITS Cost .1.3.6.1.4.1.637.3.1.5.8.28.1.6 |
adnAdjMetricIDLowLow priority cost metric ID for this link entry.ro AdnRoutingMetricType .1.3.6.1.4.1.637.3.1.5.8.28.1.7 |
adnAdjMetricCostLowLow priority cost metric for this link entry.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.28.1.8 |
adnAdjRemTpxTciThis variable provides the value of remote TPX
TCI (TPX Channel Indicator) which corresponds to
this ifIndex.ro INTEGER .1.3.6.1.4.1.637.3.1.5.8.28.1.9 |
adnMsgMonTableGeneral parameters used by the routing
services for routing message handling. SEQUENCE OF AdnMsgMonEntry .1.3.6.1.4.1.637.3.1.5.8.29 |
adnMsgMonEntryEach entry (row) of the adnMsgMonTable provides the
general parameters used by the routing services for
routing message handling for a specific type of service. AdnMsgMonEntry .1.3.6.1.4.1.637.3.1.5.8.29.1 |
adnRtsMinTimeBetLSMinimum time between self-generated
link state messages for the node.ro INTEGER (-2147483648..2147483647) -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.8.29.1.1 |
adnRtsbroadcastLSUIf active, a trigger for a one shot link
state update broadcast for this node. The
status is reset to inactive when done.rw Enumeration .1.3.6.1.4.1.637.3.1.5.8.29.1.2 |
adnRtsLSUbroadcastfreezStatus of the link state update processing.
When the status is active, no link state update
for the node is broadcast for a period of time.rw Enumeration .1.3.6.1.4.1.637.3.1.5.8.29.1.3 |
adnRtsTblDistfreezStatus of the table distribution processor.
When the status is active, the table distributions
sent to a coupler card are frozen.rw Enumeration .1.3.6.1.4.1.637.3.1.5.8.29.1.4 |
adnRtsMHStatsTableStatistics regarding Routes Message Handler
activity associated with particular network
nodes, by Type Of Service(TOS), are provided
in this table. SEQUENCE OF AdnRtsMHStatsEntry .1.3.6.1.4.1.637.3.1.5.8.30 |
adnRtsMHStatsEntryEach entry (row) in the adnRtsMHStatsTable
provides node level statistics. AdnRtsMHStatsEntry .1.3.6.1.4.1.637.3.1.5.8.30.1 |
adnRtsMHTotLSUThe number of link state update messages
received from the specified node.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.30.1.1 |
adnRtsMHTotDupLSUThe number of duplicate link state update
messages, received from the specified node,
that were discarded.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.30.1.2 |
adnRtsMHTotOldLSUThe number of link state update messages
received from the specified node, that
were too old and had to be discarded.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.30.1.3 |
adnLocalAddrTableRepresents the HSS routing services local address table
on the control unit and provides access to information
used to complete call routing to an access point within
the current node. SEQUENCE OF AdnLaEntry .1.3.6.1.4.1.637.3.1.5.8.31 |
adnLocalAddrEntryEach entry (row) in the adnLocalAddrTable maps a (local)
address supported in the node to a local interface. AdnLocalAddrEntry .1.3.6.1.4.1.637.3.1.5.8.31.1 |
adnLocalAddrIndexAddress, maintained as ASCII decimal. OCTET STRING .1.3.6.1.4.1.637.3.1.5.8.31.1.1 |
adnLocalAddrNumIfIndexNumber of ifindex per local address end point or
Interface number at the routing completion point.obsolete INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.31.1.2 |
adnLocalAddrIfIndexValue of Interface Index for each Local Address.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.8.31.1.3 |
adnRtsGlobalGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.8.32 |
adnRtsDefaultNodeIDThis routing node ID is used if there is no matching
entry (exact or partial) for a destination address in
the address to node table (adnAnTable). This is created
in response to CDC # 8447 to add 'sink address' feature
for IISP. The default value is '0'.rw AdnRoutingID .1.3.6.1.4.1.637.3.1.5.8.32.1 |
adnSfasMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9 |
adnSaSystem OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.1 |
adnNodeTimeThe value of this object identifies the current Coordinated
Universal Time (UTC) expressed in elapsed seconds by reading
the UTC real-time clock on the control unit (CU) board.ro AdnNodeTimeTicks .1.3.6.1.4.1.637.3.1.5.9.1.1 |
adnNodeResyncTrapIndicates whether the SNMP agent needs to send adnNodeResync
traps. This object is set to true whenever the control unit
(CU) board is reinitialized. The SNMP agent keeps sending
adnNodeResync traps until the NMS acknowledges the trap by
sending an SNMP Set request to reset this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.9.1.2 |
adnSaConfigFromThis value is used to indicate whether the node
has been fully configured from the NMS, or
whether the node has been installed for the
first time using an HSS installation tool.
In the case that an HSS installation tool was
used to configure the HSS (either the HSS
Installation Tool called HIT, or OSCAR, the
On-Site Configuration And Restart tool),
the full set of configuration files has not
yet been downloaded to the node from the
Network Management System.ro Enumeration .1.3.6.1.4.1.637.3.1.5.9.1.3 |
adnSaViews OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.2 |
adnViewTableThe Customer Network Management (CNM) View table which
contains an additional object for the Context table. SEQUENCE OF AdnViewEntry .1.3.6.1.4.1.637.3.1.5.9.2.1 |
adnViewEntryAn entry containing Customer Network Management (CNM)
view information applicable to a particular context. AdnViewEntry .1.3.6.1.4.1.637.3.1.5.9.2.1.1 |
adnViewIndexIf the value of an instance of this object is greater
than zero, then this corresponding conceptual row in
the contextTable refers to a Customer Network Management
(CNM) view. The value of the instance identifies the
particular CNM view which has the same value as the
instance of the adnCnmIndex object.
If the value of an instance of this object is zero, then
there is no CNM view.rw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.9.2.1.1.1 |
adnCnmTableThe Customer Network Management (CNM) database. SEQUENCE OF AdnCnmEntry .1.3.6.1.4.1.637.3.1.5.9.2.2 |
adnCnmEntryAn entry containing information on a particular family of
Customer Network Management (CNM) interfaces. AdnCnmEntry .1.3.6.1.4.1.637.3.1.5.9.2.2.1 |
adnCnmIndexA unique value for each Customer Network Management (CNM) view.
The value for each CNM view must remain constant at least from
one re-initialization of the entity's network management system
to the next re-initialization. INTEGER .1.3.6.1.4.1.637.3.1.5.9.2.2.1.1 |
adnCnmIfIndexThe value of this object is equal to MIB II's ifIndex value.
This Customer Network Management (CNM) interface should be a
physical line or channel. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.9.2.2.1.2 |
adnCnmAccessThe access type of a particular family of Customer Network
Management (CNM) interfaces within the particular CNM view.
The value 'none(1)' indicates that the corresponding instance
of adnCnmIfIndex defines a CNM interface which is not accessible.
The value 'read(2)' indicates that the corresponding instance
of adnCnmIfIndex defines a CNM interface which is read-only.
The value 'write(3)' indicates that the corresponding instance
of adnCnmIfIndex defines a CNM interface with read-write permissions.rw Enumeration .1.3.6.1.4.1.637.3.1.5.9.2.2.1.3 |
adnCnmTypeThe status of a particular family of Customer Network
Management (CNM) interfaces within the particular CNM view.
The value 'included(1)' indicates that the corresponding
instance of adnCnmIfIndex defines a CNM interface included
in the CNM view.
The value 'excluded(2)' indicates that the corresponding
instance of adnCnmIfIndex defines a CNM interface excluded
from the CNM view.rw Enumeration .1.3.6.1.4.1.637.3.1.5.9.2.2.1.4 |
adnSaTrapFilter OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.3 |
adnTrapEnableCriticalIndicates whether the SNMP agent is permitted to generate
critical traps. The value of this object provides a means
whereby all critical traps may be disabled.
Common name: Send Critical Traps.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.1 |
adnTrapEnableMajorIndicates whether the SNMP agent is permitted to generate
major traps. The value of this object provides a means
whereby all major traps may be disabled.
Common name: Send Major Traps.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.2 |
adnTrapEnableMinorIndicates whether the SNMP agent is permitted to generate
minor traps. The value of this object provides a means
whereby all minor traps may be disabled.
Common name: Send Minor Traps.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.3 |
adnTrapEnableStrIndicates whether the SNMP agent is permitted to generate
STR (Software Trouble Report) traps. The value of this
object provides a means whereby all STR traps may
be disabled.
Common name: Send SW Trouble Traps.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.4 |
adnTrapEnableDiagnosticIndicates whether the SNMP agent is permitted to generate
diagnostic traps. The value of this object provides a means
whereby all diagnostic traps may be disabled.
Common name: Send Diagnostic Traps.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.5 |
adnTrapEnableClearedIndicates whether the SNMP agent is permitted to generate
cleared traps. The value of this object provides a means
whereby all cleared traps may be disabled.
Common name: Trap Enable Cleared.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.3.6 |
adnSaUtility OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.4 |
adnSaSnmpTimerThe value of this object identifies the length of the SNMP
response timer, measured in seconds. The timer starts on receipt
of an SNMP request. If an SNMP response cannot be returned
to the NMS within that time, the SNMP command fails.rw INTEGER .1.3.6.1.4.1.637.3.1.5.9.4.1 |
adnSaInmpTimerThe value of this object identifies the length of the Internal
Network Management Protocol (INMP) response timer, measured
in seconds. The timer starts whenever an INMP command is
sent to another subsystem. If no reply is received within that
time, the INMP command fails. The value of this object
should be less than the value of adnSaSnmpTimer.rw INTEGER .1.3.6.1.4.1.637.3.1.5.9.4.2 |
adnSaMibMgt OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.5 |
adnSaMIBFilePathNameThe value of this object is the path and filename of the
MIB template that is loaded in the agent.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.9.5.1 |
adnSaQtpGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.9.6 |
adnSaQtpInitialIndicates whether the Quick Transfer Protocol
is being initialized for a new sequence of
SNMP Set messages. This value is set to true
by the NMS in the first SNMP Set command of
a sequence used to transfer a group of
configuration files. The HSS resets the value
of this object back to false immediately.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.9.6.1 |
adnSaQtpFileNameThe value of this object is the filename of a
configuration file that is to be created by the
SNMP Agent.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.9.6.2 |
adnSaQtpFileContentsThe value of this object is an octet string
containing the contents of a configuration
file that is to be created by the SNMP Agent.
The file will be named according to the value of
adnSaQtpFileName.rw OCTET STRING .1.3.6.1.4.1.637.3.1.5.9.6.3 |
adnSaLoggedTrapTableThe SNMP Agent logged trap table.
The SNMP Agent logs in this table the last several traps
(up to a maximum of 10) sent from the agent to each
destination party. The 1100 NMS will use the trap
sequence number information to detect lost traps
(from a discontinuity in the received sequence numbers,
e.g., number 17 followed by number 20), and will then
send an SNMP command to the HSS SNMP Agent to request
replay of any lost traps (e.g., 18 and 19).
The Logged Trap Table is a circular list. When the
maximum capacity is reached (the maximum number of
traps are already logged), then the next trap sent out
overwrites the oldest trap in the Logged Trap Table.
If a request is received to replay more traps than are
stored in the Logged Trap Table, then the request will
be refused with the SNMP error code genErr(5).
The Logged Trap Table is cleared upon HSS CU restart. SEQUENCE OF AdnSaLoggedTrapEntry .1.3.6.1.4.1.637.3.1.5.9.7 |
adnSaLoggedTrapEntryInformation about a single trap in the log.
Entries in this table are created automatically
by the SNMP Agent whenever a trap is sent out. AdnSaLoggedTrapEntry .1.3.6.1.4.1.637.3.1.5.9.7.1 |
adnSaLoggedTrapPartyIndexThe value of partyIndex for the manager to
whom the logged trap was sent. This uniquely
identifies the receiving manager.
The adnSaLoggedTrapPartyIndex and the
adnSaLoggedTrapIndex sequence number together
uniquely identify the logged trap.ro INTEGER .1.3.6.1.4.1.637.3.1.5.9.7.1.1 |
adnSaLoggedTrapIndexThe trap sequence number of the logged trap.
This object takes the value of the snmpTrapNumbers
variable of the logged trap that it references.
The adnSaLoggedTrapIndex sequence number and the
adnSaLoggedTrapPartyIndex together uniquely identify
the logged trap.ro INTEGER .1.3.6.1.4.1.637.3.1.5.9.7.1.2 |
adnSaLoggedTrapCategoryThe category of the logged trap.
This object takes the value of the adnTrapCategory
variable of the logged trap that is referenced by
adnSaLoggedTrapIndex and adnSaLoggedTrapPartyIndex.ro INTEGER .1.3.6.1.4.1.637.3.1.5.9.7.1.3 |
adnSaLoggedTrapReplayTableThe SNMP Agent logged trap replay table.
The 1100 NMS SNMP Manager uses this table to
request retransmission from the SNMP agent of
any traps which are stored in the Logged Trap Table.
The 1100 NMS sends an SNMP Set command, specifying
a starting sequence number and an ending sequence
number (e.g., 18 and 19). Both sequence numbers
must be present in the Logged Trap Table for the
command to be successful.
The SNMP Set command to request replay of traps must
contain each of the following objects in this order:
adnSaLoggedTrapReplayFirst,
adnSaLoggedTrapReplayLast,
adnSaLoggedTrapReplayOn.
If one of the objects is missing, or the order is
incorrect, an error response will be returned with
an SNMP error code of genErr(5).
If both starting and ending sequence numbers are
found in the Logged Traps Table, the SNMP Agent
will then replay the traps, starting with the first
one specified, and ending with the last one specified.
If the value of adnSaLoggedTrapReplayFirst is equal
to adnSaLoggedTrapReplayLast, then only one trap
is replayed.
The ending sequence number may have a lower
value than the starting sequence number, in
the case that the trap sequence number has
reached its maximum and rolled over through zero.
The SNMP Agent will look in the adnSaLoggedTrapTable
using the value given in the SNMP Set request
for adnSaLoggedTrapReplayPartyIndex as the
adnSaLoggedTrapPartyIndex, and using the value of
adnSaLoggedTrapReplayFirst as the adnSaLoggedTrapIndex.
If the first trap is found in the adnSaLoggedTrapTable,
then the SNMP Agent will look for the last trap to be
replayed, using the value of adnSaLoggedTrapReplayLast
as the adnSaLoggedTrapIndex.
If either the first trap to be replayed or the last
trap to be replayed cannot be found in the
adnSaLoggedTrapTable, then an error response is
returned with an SNMP error code of genErr(5).
The value of adnSaLoggedTrapReplayOn is set to
enabled by the 1100 NMS in the Set command, and
is reset to disabled by the SNMP Agent when the
command has been processed.
If the procesing of the command identifies any
traps to be replayed, then these are all sent out
immediately by the SNMP Agent. SEQUENCE OF AdnSaLoggedTrapReplayEntry .1.3.6.1.4.1.637.3.1.5.9.8 |
adnSaLoggedTrapReplayEntryInformation corresponding to a replay request
from an SNMP Manager. AdnSaLoggedTrapReplayEntry .1.3.6.1.4.1.637.3.1.5.9.8.1 |
adnSaLoggedTrapReplayPartyIndexThe value of partyIndex for the manager to
whom the logged traps were originally sent,
and who is now requesting the replay.rw INTEGER .1.3.6.1.4.1.637.3.1.5.9.8.1.1 |
adnSaLoggedTrapReplayFirstThe trap sequence number of the first trap in a
sequence of one or more logged traps to be replayed.
This object takes the value of the snmpTrapNumbers
variable of the first trap being requested.
The SNMP Agent will look in the adnSaLoggedTrapTable
using the given value of adnSaLoggedTrapReplayPartyIndex
in the SNMP Set request as the adnSaLoggedTrapPartyIndex,
and using the value of this object as
adnSaLoggedTrapIndex.
After processing a replay command, the SNMP Agent
resets this value back to zero.rw INTEGER .1.3.6.1.4.1.637.3.1.5.9.8.1.2 |
adnSaLoggedTrapReplayLastThe trap sequence number of the last trap in a
sequence of one or more logged traps to be replayed.
This object takes the value of the snmpTrapNumbers
variable of the last trap being requested.
The SNMP Agent will look in the adnSaLoggedTrapTable
using the given value of adnSaLoggedTrapReplayPartyIndex
in the SNMP Set request as the adnSaLoggedTrapPartyIndex,
and using the value of this object as
adnSaLoggedTrapIndex.
After processing a replay command, the SNMP Agent
resets this value back to zero.rw INTEGER .1.3.6.1.4.1.637.3.1.5.9.8.1.3 |
adnSaLoggedTrapReplayOnThis object is set to a value of enabled by the 1100 NMS
to request trap replay. Traps numbered between
adnSaLoggedTrapReplayFirst and adnSaLoggedTrapReplayLast
are sent by the SNMP Agent to the manager identified
by adnSaLoggedTrapReplayPartyIndex. The SNMP Agent
resets this value to disabled after processing the
request.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.9.8.1.4 |
adnLdrMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.10 |
adnLdrChanTableThis table contains all the fields supported by all the line
drivers. It contains configuration, control and statistics
information for the channel. SEQUENCE OF AdnLdrChanEntry .1.3.6.1.4.1.637.3.1.5.10.1 |
adnLdrChanEntryAn entry in the line driver (LDR) table. There is
one entry for each LDR channel configured. AdnLdrChanEntry .1.3.6.1.4.1.637.3.1.5.10.1.1 |
adnLdrChanTypeType of line driver to which the channel belongs.ro Enumeration .1.3.6.1.4.1.637.3.1.5.10.1.1.1 |
adnLdrChanStatisticsFlagFlag indicates if statistics is enabled on this channel.
Common Name: Statisticsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.10.1.1.2 |
adnLdrChanSubFrameINNumber of sub-frames received by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.3 |
adnLdrChanAbortINNumber of received frames aborted (G.703 (DS1 or E1)
line driver only).
This object is not relevant to the v-series (RS232, V.35,
V36, or X.21) or FLIP (fake line internal process) line
drivers which will respond to an SNMP Get command with a
value of zero.
This object has the same value as
rs232SyncPortAbortedFrames in the rs232SyncPortTable for
the v-series line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.4 |
adnLdrChanCrcErrINNumber of frames received with a CRC errors (G.703
(DS1 or E1) line driver only).
This object is not relevant to the v-series (RS232, V.35,
V.36, or X.21) or FLIP (fake line internal process) line
drivers which will respond to an SNMP Get command with a
value of zero.
This object has the same value as rs232SyncPortFrameCheckErr
in the rs232SyncPortTable for the v-series line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.5 |
adnLdrChanOverRunErrINNumber of sub-frames received which have overrun
errors (G.703 (DS1 or E1) line driver only).
This object is not relevant to the v-series (RS232, V.35,
V.36, or X.21) or FLIP (fake line internal process) line
drivers which will respond to an SNMP Get command with a
value of zero.
This object has the same value as
rs232SyncPortReceiveOverrunErrs in the rs232SyncPortTable
for the v-series line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.6 |
adnLdrChanOctetAlignErrINNumber of sub-frames received with misaligned octet errors.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.7 |
adnLdrChanBusyErrINNumber of sub-frames received which have the busy error.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.8 |
adnLdrChanAbortOUTNumber of aborts that occurred during transmission (G.703
(DS1 or E1) line driver only).
This object is not relevant to the v-series (RS232, V.35,
V.36, or X.21) or FLIP (fake line internal process) line
drivers which will respond to an SNMP Get command with a
value of zero.
This object has the same value as
rs232SyncPortInterruptedFrames in the rs232SyncPortTable
for the v-series line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.9 |
adnLdrChanUnderRunErrOUTNumber of underrun error that occurred during transmission
(G.703 (DS1 or E1) line driver only).
This object is not relevant to the v-series or FLIP (fake
line internal process) line drivers which will respond to
an SNMP Get command with a value of zero.
This object has the same value as
rs232SyncPortTransmitUnderrunErrs in the rs232SyncPortTable
for the v-series Line Driver (LDR).ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.10 |
adnLdrChanNumOfFlagsThe minimum number of flags to recognize the end of
one frame and the start of the next (G.703 (DS1 or E1)
line driver only).
This object is not relevant to the v-series or FLIP (fake
line internal process) line drivers which will respond to
an SNMP Get command with a value of zero.
This object has the same value as rs232SyncPortMinFlags
in the rs232SyncPortTable for the v-series Line Driver(LDR).rw INTEGER .1.3.6.1.4.1.637.3.1.5.10.1.1.11 |
adnLdrChanFlagOrIdleThis indicates whether flags or idle code is used
between frames.
Common Name: Flags or Idle Between Framesrw Enumeration .1.3.6.1.4.1.637.3.1.5.10.1.1.12 |
adnLdrChanTimeSlotMaskThis defines the bit location for framed subrate
channels (G.703 (DS1 or E1) line driver only).
This object is not relevant to the v-series or FLIP (fake
line internal preocess) line drivers which will respond
to an SNMP Get command with a value of zero. This object
is related to dsx1LineCoding in the DS1/E1 MIB.
For B8ZS (Binary-8 Zero Suppression) and HDB3
(ITU G.703 standard for E1 lines), the usual
value is clear64Kbps, but the user can change
this to any value.
For AMI (Alternate Mark Inversion), the usual
value is b8jam56Kbps, but the user can change
this to any value except clear64Kbps (because
it would violate pulse density).
Note that the numerical values of
adnLdrChanTimeSlotMask have been chosen so that
they correspond to the one's complement of
the bit mask used by the hardware.
clear64Kbps = Binary 00000000
b8jam56Kbps = Binary 00000001
b7jam56Kbps = Binary 00000010
Any additions to this object's values should
follow the same principle.
Common Name: Pulse Density Maskro Enumeration .1.3.6.1.4.1.637.3.1.5.10.1.1.13 |
adnLdrChanFramedThis indicates whether the G.703 (DS1 or E1)
interface is framed or unframed (G.703 line driver
only).
This object is not relevant to the v-series (RS-232, V.35,
V.36, or X.21) or FLIP (fake line internal process) line
drivers which will respond to an SNMP Get command with a
value of zero.ro Enumeration .1.3.6.1.4.1.637.3.1.5.10.1.1.14 |
adnLdrChanCosRtOutOctetsNumber of Real-time Class of Service Octets transmitted
by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.15 |
adnLdrChanCosRtOutPktsNumber of Real-time Class of Service packets (frame or subframes)
transmitted by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.16 |
adnLdrChanCosRtOutErrorsNumber of errors while transmitting Real-time Class of Service
data by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.17 |
adnLdrChanCosNrtOutOctetsNumber of Non-real-time Class of Service Octets transmitted
by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.18 |
adnLdrChanCosNrtOutPktsNumber of Non-real-time Class of Service packets (frame or subframes)
transmitted by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.19 |
adnLdrChanCosNrtOutErrorsNumber of errors while transmitting Non-real-time Class of Service
data by the line driver.ro Counter .1.3.6.1.4.1.637.3.1.5.10.1.1.20 |
adnNmgsMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11 |
adnAmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11.1 |
adnAmEnableAccountingIndicates whether accounting data is collected
and processed for all subscribing applications on
the node by the Node Management Subsystem.
Common Name: Node Accountingrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.1.1 |
adnAmCollectIntervalDefines the time period between collections of accounting
data. The unit of time for this interval is minutes.
Common Name: Acctg Collection Intervalrw INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.5.11.1.2 |
adnAmPostIntervalDefines a time period between transfers of the accounting
data file to the Network Management System directory.
After each transfer, the Network Management System
is also notified via a SNMP trap that this file is ready
for transfer to the Network Management System via FTP
services. Each posting contains only accounting data
collected since the last posting. The unit of time for this
interval is minutes.
Common Name: Acctg Posting Intervalrw INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.5.11.1.3 |
adnAmPostAccountingWhen adnAmPostAccounting is enabled, a file containing the
current accounting data is transferred to the Network
Management System directory and the Network Management
System is subsequently notified via a SNMP trap that this
file is ready for transfer to the Network Management System
via FTP services. This file contains all the accounting
data collected since the lasting posting.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.1.4 |
adnAmMakeAccountingWhen adnAmMakeAccounting is enabled, the accounting data
from all applications that have registered for the service
are requested and collected in a common file. After waiting
the time interval defined in adnAmMakeAccountingWindow to
receive all responses, the accounting file is transferred
to the Network Management System directory and the Network
Management System is notified via a SNMP trap that this file
is ready for transfer to the Network Management System via
FTP services.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.1.5 |
adnAmMakeAccountingWindowWhen adnAmMakeAccounting is enabled, accounting data is
requested from all applications that have registered for
this service. adnAmMakeAccountingWindow is the time interval
during which responses to these requests are accepted.
adnAmMakeAccountingWindow is specified in units of seconds.
Common Name: Make Acctg Windowrw INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.11.1.6 |
adnAmAccountingFilePathNameThe complete pathname of the current accounting file in the
Network Management System directory which contains
accounting data collected since the last posting. The
complete pathname starts with and includes the root
directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.11.1.7 |
adnFmGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11.2 |
adnFmSaveCrucialAlarmIndicates whether crucial alarms received from
applications are saved in the alarm file.
Common Name: Save Crucial Alarmsro AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.1 |
adnFmSaveAdminAlarmIndicates whether administrative alarms received from
applications are saved in the alarm file.
Common Name: Save Admin Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.2 |
adnFmSaveCriticalAlarmIndicates whether critical alarms received from
applications are saved in the alarm file.
Common Name: Save Critical Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.3 |
adnFmSaveMajorAlarmIndicates whether major alarms received from
applications are saved in the alarm file.
Common Name: Save Major Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.4 |
adnFmSaveMinorAlarmIndicates whether minor alarms received from
applications are saved in the alarm file.
Common Name: Save Minor Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.5 |
adnFmSaveTroubleAlarmIndicates whether trouble alarms received from
applications are saved in the alarm file.
Common Name: Save Trouble Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.6 |
adnFmSaveDiagnosticAlarmIndicates whether diagnostic alarms received from
applications are saved in the alarm file.
Common Name: Save Diagnostic Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.7 |
adnFmSaveClearedAlarmIndicates whether cleared alarms received from
applications are saved in the alarm file.
Common Name: Save Cleared Alarmsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.8 |
adnFmAlarmPostIntervalDefines a time period between transfers of the alarm file
to the Network Management System directory. After
each transfer, the Network Management System is also
notified via a SNMP trap that this file is ready for
transfer to the Network Management System via FTP services.
Each posting contains only those alarms collected since the
last posting. The unit of time for this interval is minutes.
Common Name: Alarm Posting Intervalrw INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.5.11.2.9 |
adnFmPostAlarmWhen adnFmPostAlarm is enabled, the current file is
transferred to the Network Management System directory and
the Network Management System is subsequently notified via
a SNMP trap that this file is ready for transfer to the
Network Management System via FTP services. This file
contains all alarms saved since the lasting posting.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.2.10 |
adnFmAlarmFilePathNameThe complete pathname of the current alarm file in the
Network Management System directory which contains all
alarms collected since the last posting. The complete
pathname starts with and includes the root directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.11.2.11 |
adnPmHsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11.3 |
adnPmHsEnableStatsIndicates whether historical statistics are collected
and processed for all subscribing applications on the
node by the Node Management Subsystem.
Common Name: Historical Stats Collectionrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.3.1 |
adnPmHsCollectIntervalDefines the time period between collections of historical
statistics. The unit of time for this interval is minutes.
Common Name: Historical Stat Collect Timerrw INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.5.11.3.2 |
adnPmHsPostIntervalDefines a time period between transfers of the historical
statistics file to the Network Management System directory.
After each transfer, the Network Management System
is notified via a SNMP trap that this file is ready
for transfer to the Network Management System via FTP
services. Each posting contains only those historical
statistics collected since the last posting. The unit of
time for this interval is minutes.
Common Name: Historical Stats Post Timerrw INTEGER -- UNITS minutes .1.3.6.1.4.1.637.3.1.5.11.3.3 |
adnPmHsPostStatsWhen adnPmHsPostStats is enabled, a file containing the
current historical statistics is transferred to the Network
Management System directory and the Network Management
System is subsequently notified via a SNMP trap that this
file is ready for transfer to the Network Management System
via FTP services. This file contains all the historical
statistics collected since the last posting.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.3.4 |
adnPmHsMakeStatsWhen adnPmHsMakeStats is enabled, historical statistics
from all applications that have registered for the service
are requested and collected in a common statistics file.
After waiting the time interval defined in
adnPmHsMakeStatsWindow to receive all responses, the
statistics file is transferred to the Network Management
System directory and the Network Management System is
notified via a SNMP trap that this file is ready for
transfer to the Network Management System via FTP
services.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.3.5 |
adnPmHsMakeStatsWindowWhen adnPmHsMakeStats is enabled, historical statistics
are requested from all applications that have registered
for this service. adnPmHsMakeStatsWindow is the time
interval during which responses to these requests are
accepted. adnPmHsMakeStatsWindow is specified in units
of seconds.
Common Name: Make Historical Stats Windowrw INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.11.3.6 |
adnPmHsFilePathNameThe complete pathname of the current historical statistics
file in the Network Management System directory which
contains all historical statistics collected since the last
posting. The complete pathname starts with and includes the
root directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.11.3.7 |
adnPmIsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11.4 |
adnPmIsEnableStatsCollectionIndicates whether interval statistics are collected
from all subscribing applications on the node by the
Node Management Subsystem.
Common Name: Interval Stats Collectionrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.4.1 |
adnPmIsCurrentIntervalOne of 96 discrete time intervals (or buckets) into
which the interval statistics are being collected.ro INTEGER -- UNITS Current Interval .1.3.6.1.4.1.637.3.1.5.11.4.2 |
adnDumGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.11.5 |
adnDumEnableEnables and disables all Disk Utilization
Management processing.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.1 |
adnDumReduceExcessDiskStorageEnables and disables all methods to reduce excessive
disk storage in Disk Utilization Management managed
filesystems. Methods of reduction consist of those
defined by adnDumCyclicallyReduceExcess and
adnDumImmediatelyReduceExcess. The Disk Utilization
Management's managed filesystems are also defined in
the adnDumGroup.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.2 |
adnDumCyclicallyReduceExcessEnables and disables the cyclical reduction of excess
disk storage in Disk Utilization Management's managed
filesytems. Disk Utilization Management's reduction
process is an adjunct of its monitoring process.
The periodicity of both processes is defined by
adnDumMonitorInterval. The Disk Utilization Management's
managed filesystems are also defined in adnDumGroup.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.3 |
adnDumImmediatelyReduceExcessEnables and disables the immediate reduction of
excessive disk storage in Disk Utilization Management's
managed filesystems. Independent of its monitoring
cycle, Disk Utilization Management immediately reduces
excessive disk storage. Once the excess storage is
reduced, Disk Utilization Management effectively
sets this object to disabled.
The Disk Utilization Management's managed filesystems
are also defined in the adnDumGroup.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.4 |
adnDumFlagThresholdViolationsEnables and disables Disk Utilization Management's
notification to the Network Management System of
threshold violations from Disk Utilization
Management's managed filesystems. Disk Utilization
Management notifies the Network Management System
via a Simple Network Management Protocol trap. The
Disk Utilization Management's managed filesystems
are also defined in the adnDumGroup.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.5 |
adnDumFlagFileReadyEnables and disables Disk Utilization Management's
notification to the Network Management System of
overdue file retrievals from Disk Utilization
Management's managed filesystems. If file retrievals
are not completed within the limit,
adnDumFileRetrievalTimeLimit, Disk Utilization
Management considers the retrievals overdue and
notifies the Network Management System via a Simple
Network Management Protocol trap. The Disk
Utilization Management's managed filesystems are
also defined in the adnDumGroup.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.6 |
adnDumLogEventsEnables and disables Disk Utilization Management's
maintenance of a history log file in which Disk
Utilization Management events are recorded. The
history log file is in an ASCII format.rw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.11.5.7 |
adnDumMonitorIntervalDefines the period of time between disk monitoring
by Disk Utilization Management. The unit of time for
this interval is seconds.rw INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.11.5.8 |
adnDumFileRetrievalTimeLimitDefines the time period that Disk Utilization
Management allows the Network Management System
to retrieve files from Disk Utilization
Management's managed filesystems, before
determining that a reminder trap is required.
The unit of time for this interval is seconds.rw INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.11.5.9 |
adnDumDirectoryTableThe Disk Utilization Management Directory Table
defines the directories and subdirectories on
which the filesytems that Disk Utilization
Management manages are mounted. By default,
the only filesystem monitored for disk
utilization is /hss (which also contains
/to_nms). SEQUENCE OF AdnDumDirectoryEntry .1.3.6.1.4.1.637.3.1.5.11.5.10 |
adnDumDirectoryEntryAn entry in the Disk Utilization Management
Directory Table that defines one directory
and any subdirectories under the directory. AdnDumDirectoryEntry .1.3.6.1.4.1.637.3.1.5.11.5.10.1 |
adnDumDirectoryIndexIndex to a table of directories on which
Disk Utilization Management managed
filesystems have been mounted. INTEGER .1.3.6.1.4.1.637.3.1.5.11.5.10.1.1 |
adnDumDirectoryPathnameThe complete pathname to the directory on which
a managed filesystem is mounted. The complete
pathname starts with and includes the root
directory. By default, the directory /hss is
monitored. This includes the directory
/to_nms.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.11.5.10.1.2 |
adnDumDirectoryPercentUsageThe percent of the aggregate disk storage that is
used in the directory on which the filesystem is
mounted.ro AdnPercent .1.3.6.1.4.1.637.3.1.5.11.5.10.1.3 |
adnDumDirectoryLevelUsageThe level of usage of aggregate disk storage with
respect to the three usage thresholds, low, medium
and high, in the directory on which the filesystem
is mounted.ro Enumeration .1.3.6.1.4.1.637.3.1.5.11.5.10.1.4 |
adnDumUsageThresholdsA set of low, medium and high limits to the amount
of the aggregate disk storage that is utilized in a
managed filesystem. Each value represents a percentage
of the whole amount that is allocated to the
particular filesystem.rw Enumeration .1.3.6.1.4.1.637.3.1.5.11.5.10.1.5 |
adnDumSubdirectoryTableThe Disk Utilization Management Subdirectory
Table defines the subdirectories under a Disk
Utilization Management directory. A filesytem
that Disk Utilization Management manages is
mounted on the Disk Utilization Management
directory. By default, the subdirectories
under /hss which are monitored are:
/hss/to_nms/perf (first priority is to delete
old historical stats files.)
/hss/to_nms/fault (second priority is to delete
old alarm files.)
/hss/to_nms/acct (third priority is to delete
old accounting files, but only
if the quota for accoutning is
less than the default value
of 100 percent.) SEQUENCE OF AdnDumSubdirectoryEntry .1.3.6.1.4.1.637.3.1.5.11.5.11 |
adnDumSubdirectoryEntryAn entry in the Disk Utilization Management
Subdirectory Table that defines one subdirectories
under a Disk Utilization Management directory. AdnDumSubdirectoryEntry .1.3.6.1.4.1.637.3.1.5.11.5.11.1 |
adnDumSubdirectoryIndexIndex to a table of subdirectories under a
directory on which a Disk Utilization
Management's managed filesystem has been
mounted. The value of the index is directly
related to order in which the subdirectories
are targeted for storage reduction. The first
subdirectory in the table of subdirectories
that Disk Utilization Management targets for
storage reduction has index 1 INTEGER .1.3.6.1.4.1.637.3.1.5.11.5.11.1.1 |
adnDumSubdirectoryPathnameThe complete pathname to the subdirectory of
a Disk Utilization Management directory. The
complete pathname starts with and includes the
root directory.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.11.5.11.1.2 |
adnDumSubdirectoryQuotaThe percent of the aggregate disk storage that
is allocated to the subdirectory of the
filesystem on which the parent directory is
mounted. The default quota for the
/hss/to_nms/perf subdirectory is 10 percent,
meaning that on a first pass of the
reduction cycle, old statistics files will
be deleted until the /hss/to_nms/perf
subdirectory is using no more than 10
percent of the total partition size. The
default quota for the /hss/to_nms/fault
subdirectory is 10 percent.
The default quota for the /hss/to_nms/acct
subdirectory is 100 percent, meaning that
no accounting files will be deleted by this
process.rw AdnPercent .1.3.6.1.4.1.637.3.1.5.11.5.11.1.3 |
adnUpdateCntlMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.12 |
adnUCNodeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.12.1 |
adnUCNodeAdminCommandThe NMS sets a command value into this object,as follows:
NULL No action to take place.
install Places newly-transferred files in a read-
only partition.
activate HSS sends code/configuration to
subsystems.
commit HSS declares the activated code/
configuration to be in committed state.
deactivate Changes the state of the HSS by reverting
to the committed code and configuration.
withdraw Deletes installed files.
confirm-link Set by the NMS following receipt of
successful Activate trap.
qInstallActivate Places newly-transferred Quick
configuration change files
in a secured partition and
sends configuration to subsytems.
qDeactivateWithdraw Undoes Quick configuration changes
and deletes installed files.
qConfirmChange Confirms a Quick configuration
change and sets it as an extension
of the committed version.
qRebaseline Install and commit a new set of
configuration files to synchronize
the NMS and HSS after several
Quick transactions.
Common Name: Administrative Commandrw Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.1 |
adnUCNodeOperCommandThis object indicates the current or last command
accepted and processed by the HSS.
Common Name: Oper Commandro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.2 |
adnUCNodeOperStatusThis object notifies the NMS of the results of the last
command, or if it is still in progress.
Common Name: Oper Command Statusro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.3 |
adnUCNodeStateThis object notifies the NMS of the `state' of code/
configuration update processing. The values are:
committed
software version.
activateInProgress
progress.
uncommitted
software version.
activateInProgressSuspended
is in progress. The processing of
the Activate is suspended while the
Control Unit board waits for a
confirmation that any coupler boards
that have been reset have gone down,
before Activate processing continues.
loadingCommittedSuspended
process of loading the committed
software version, due to a Deactivate
command or an automatic rollback.
The processing of the deactivation is
suspended while the Control Unit board
waits for a confirmation that any
coupler boards that have been reset
have gone down, before deactivation
processing continues.
loadingCommitted
loading the committed software version,
due to a Deactivate command or an
automatic rollback.
qConfirmed
configuration change on top of the
committed version.
qActivateInProgress
command is in progress.
qUnconfirmed
Quick configuration.
qLoadingConfirmed
loading the confirmed Quick configuration,
due to a Quick Deactivate&Withdraw command
or an automatic rollback.
qRebaselineInProgress
in progress.
Common name: Update Control Statusro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.4 |
adnUCNodeErrorTypeThis object notifies the NMS of the type of error detected
by the HSS configuration management.
no-err
config
software
management.
Common Name: Update Error Typero Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.5 |
adnUCNodeErrorStatusThis object notifies the NMS of the exact error detected
by the HSS configuration management. For configuration table
errors, this is the SNMP error code defined in RFC 1448.
For software or firmware management errors, the value is
genErr(5).
Common Name: Update Error Statusro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.6 |
adnUCNodeErrorGroupThis object identifies the group in which this specific
error code is defined. Typically, a group corresponds to
one HSS software subsystem.
Common Name: Update Error Groupro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.7 |
adnUCNodeErrorCodeThis object identifies a specific error defined within a
group. Its interpretation depends on the value of
adnUCNodeErrorGroup.
Common Name: Update Error Codero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.8 |
adnUCNodeExceptionCodeThis object identifies an exception condition, if an error
was detected during configuration table processing
(adnUCNodeErrorType = config). Values may be zero
(no exception), 0x80 (no such object) or 0x81 (no such
instance).
Common Name: Update Exception Codero INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.9 |
adnUCNodeErrorChassisThis object identifies the chassis for which the
error occurred.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.10 |
adnUCNodeErrorSlotThis object identifies the slot for which the
error occurred.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.11 |
adnUCNodeErrorProcThis object identifies the processor for which the
error occurred, in the case of software or firmware
management errors (adnUCNodeErrorType = software).ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.12 |
adnUCNodeErrorTableNameThis object identifies the MIB table name for which
the error occurred, in the case of configuration table
errors (adnUCNodeErrorType = config).ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.1.13 |
adnUCNodeErrorIndex1This object identifies the first index value of the table
instance for which the error occurred, in the case of
configuration table errors (adnUCNodeErrorType = config).
It is zero if it does not apply, or if it cannot be
represented as an integer.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.14 |
adnUCNodeErrorIndex2This object identifies the second index value of the table
instance for which the error occurred, in the case of
configuration table errors (adnUCNodeErrorType = config).
It is zero if it does not apply, or if it cannot be
represented as an integer.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.15 |
adnUCNodeErrorIndex3This object identifies the third index value of the table
instance for which the error occurred, in the case of
configuration table errors (adnUCNodeErrorType = config).
It is zero if it does not apply, or if it cannot be
represented as an integer.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.16 |
adnUCNodeErrorIndex4This object identifies the fourth index value of the table
instance for which the error occurred, in the case of
configuration table errors (adnUCNodeErrorType = config).
It is zero if it does not apply, or if it cannot be
represented as an integer.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.17 |
adnUCNodeErrorNominatorThis object identifies the nominator for which the error
occurred, in the case of configuration table errors
(adnUCNodeErrorType = config).ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.1.18 |
adnUCNodeUncommittedAvailThis object indicates whether there is an uncommitted
version installed. The values are:
available
unavailable
Common Name: Uncommitted Versionro Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.19 |
adnUCNodeDeliveryTypeThe type of delivery made by the NMS to the HSS.
SingleReplacement means that the entire software
version for the HSS is being delivered, and should
replace unconditionally whatever is the current
software version running at the HSS. SingleModification
means that the delivery from the NMS may be full or
partial, and that the HSS will detect which files have
changed between the current HSS software version and
the new delivery. For both singleReplacement and
singleModification, there is just one single delivery
tar file from the NMS, not multiple tar files.rw Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.20 |
adnUCNodeDebugCommandThis object is used by a network operator to enable
the capture of configuration management trace
information into an ASCII file, which may then be
retrieved and analyzed off-line.
Setting the value of this object to startTrace
causes the HSS to begin saving the detailed
trace of the Node Configuration Management Subsystem
into the memory of the HSS Control Unit.
Setting the value of this object to saveTrace
causes the detailed trace of the Node Configuration
Management Subsystem to be copied from HSS memory
into a file stored on the HSS Control Unit disk,
in /hss_pmd/.nmcm_detail_trace. The file is a
snapshot of the current trace in memory. Its
maximum size is 500,000 bytes.
If a previous snapshot already existed in the
directory /hss_pmd, then this old file is renamed
to /hss_pmd/.old.nmcm_detail_trace. (A third trace
file, .auto_nmcm_detail_trace, may also be present
in the same directory. This contains a snapshot
of the trace in memory that is saved to disk
automatically in the event of an internally-detected
error condition or version deactivation.)
Setting the value of this object to stopTrace
causes the HSS to stop saving the detailed trace
into memory.
NoCommand is the default value of this object,
and has no effect on the node.rw Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.21 |
adnUCNodeCodeFlashFlagThis object is used by a network operator to enable
or disable the code downloading from coupler flash.
The values are:
disableFlash - code will be neither programmed in
flash (either on-line or off-line)
nor loaded from flash.
offLineFlashOnly - only off-line flash update is
allowed. Code can be loaded
from flash.
enableFlash - code can be programmed in flash
(either on-line or off-line) and
loaded from flash.rw Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.22 |
adnUCNodeConfigFlashFlagThis object is used by a network operator to enable
or disable the configuration downloading from
coupler flash. The values are:
disableFlash - the configuration will be neither
programmed in flash (either on-line
or off-line) nor loaded from flash.
offLineFlashOnly - only off-line flash update is
allowed. The configuration can
be loaded from flash.
enableFlash - the configuration can be programmed
in flash (either on-line or off-line)
and loaded from flash.rw Enumeration .1.3.6.1.4.1.637.3.1.5.12.1.23 |
adnUpdateCntl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.12.2 |
adnCuCodeUpdateCntlTableThe Control Unit Update Control table contains objects for
Control Unit code operational status between the HSS and
the NMS. SEQUENCE OF AdnCuCodeUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.2 |
adnCuCodeUpdateCntlEntryAn entry in the Control Unit code portion of the Update
Control table. AdnCuCodeUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.2.1 |
adnCuCodeServiceIdIndexIndex field. The value of a Control Unit service. Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.2.1.1 |
adnCuCodeOperStatusThis object notifies the NMS of the results of the last
command, or whether it is still in progress.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.2.1.2 |
adnCuCodeStateThis object notifies the NMS of the `state' of Control
Unit code update processing.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.2.1.3 |
adnCuConfigUpdateCntlTableThe Configuration Update Control table contains objects
for Control Unit Configuration operational status between
the HSS and the NMS. SEQUENCE OF AdnCuConfigUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.3 |
adnCuConfigUpdateCntlEntryAn entry in the Control Unit Configuration Update Control
table. AdnCuConfigUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.3.1 |
adnCuConfigApplIdIndexIndex field - Control Unit application IDs (e.g. NMGS,
SFAS, Main Supervisor, ....) Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.3.1.1 |
adnCuConfigOperStatusThis object notifies the NMS of the results of the last
command, or whether it is still in progress.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.3.1.2 |
adnCuConfigStateThis object notifies the NMS of the `state' of Control
Unit configuration update processing. The values mean:
committed
loading configuration tables. Its
configuration tables are from the
committed version.
actInProgWaitingForLoadInd
is in progress, and for this CU
application, the state machine is
waiting for an indication that a request
has been received to start loading the
tables.
actInProgMiddleTransaction
is in progress, and for this CU
application, the state machine is
waiting for the response to a middle
message within a configuration
transaction.
actInProgEndTransaction
is in progress, and for this CU
application, the state machine is
waiting for the response to a null
message that signals the end of a
a configuration transaction.
uncommitted
uncommitted configuration tables.
loadingCommittedNextFile
is the the process of loading
uncommitted configuration tables.
The state machine is waiting for a
response to a null message that
signals the end of a transaction,
and will then send the next
configuration file, which will be the
rollback file.
loadingCommittedMiddleTrans
is the the process of loading
committed configuration tables.
The state machine is waiting for a
response to a middle message within
the configuration transaction.
loadingCommittedEndTrans
is the the process of loading
committed configuration tables.
The state machine is waiting for a
response to a null message that
signals the end of a transaction.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.3.1.3 |
adnCuConfigFileNameThis object identifies the configuration file to be used
for this Control Unit subsystem.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.2.3.1.4 |
adnCuConfigNextFileNameThis object identifies the next configuration file to be
used for this Control Unit subsystem, if there is an automatic
rollback in progress from uncommitted configuration to
committed configuration. The value of this object is not
significant if there is currently no rollback in progress.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.2.3.1.5 |
adnProcCodeUpdateCntlTableThe Update Control table contains objects for processor
code operational status between the HSS and the NMS. SEQUENCE OF AdnProcCodeUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.4 |
adnProcCodeUpdateCntlEntryAn entry in the processor code portion of the Update
Control table. AdnProcCodeUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.4.1 |
adnProcCodeChassisIndexIndex field that identifies the chassis. Chassis are
numbered 1-7. The main chassis (i.e., the one with the
active Control Unit) in a multi-chassis node is chassis
number 1. In a single-chassis node, the chassis number is 1.
This number is provided in hardware by a HLCID card which
is plugged into the midplane. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.4.1.1 |
adnProcCodeSlotIndexIndex field that identifies the slot. Slots within a
chassis are numbered 1-12. The first slot on the left when
facing the front of the chassis is number 1. This number is
provided in hardware through hard-wiring on the midplane.
Note that the HBSAC board always has a special slot
identifier of 30, but this slot number is never used. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.4.1.2 |
adnProcCodeProcessorIndexIndex field that identifies the processor on a coupler
board. Processors on a coupler are numbered 0-3. The number
of processors varies depending on the type of coupler. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.4.1.3 |
adnProcCodeOperStatusThis object notifies the NMS of the results of the last
command, or whether it is still in progress.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.4.1.4 |
adnProcCodeStateThis object notifies the NMS of the `state' of processor
code update processing. The values are:
committed
loading, and the software for this
processor is the committed version.
actInProgWaitForDownMsg
is in progress, this processor has
been reset, and the state machine is
waiting for a message confirming that
the processor is now down.
actInProgWaitForReloadReq
is in progress, this processor has
already loaded at least once and then
started to reload. The state machine
is waiting for another load request.
actInProgWaitForSwCompleteMsg
is in progress, and the state machine
is waiting for a message to indicate
that the software portion of the load
has completed.
uncommitted
of loading. It is currently running
uncommitted software.
loadCommittedWaitForDownMsg
in the process of loading committed
software. The processor has been reset,
and the state machine is waiting for a
message confirming that the processor
is down.
loadCommittedWaitForCompleteMsg
is in the process of loading committed
software. The state machine is waiting
for a message to indicate that the load
has completed.
pending
this processor is currently down. When
the processor comes up, it will be
loaded with the uncommitted software
version.
actInProgWaitForFwareCompleteMsg
command is in progress, and the state
machine is waiting for a message to
indicate that the firmware portion
of the load has completed.
actInProgWaitForFlashCompleteMsg
command is in progress, and the state
machine is waiting for a message to
indicate that the update of code into
flash memory has completed.
actInProgWaitForLoadRequest
is in progress, and this processor
has been reset. The state machine is
waiting for a request to start the
loading process.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.4.1.5 |
adnBrdConfigUpdateCntlTableThe board configuration portion of the Update Control
table contains objects for board configuration operational
status between the HSS and the NMS. SEQUENCE OF AdnBrdConfigUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.5 |
adnBrdConfigUpdateCntlEntryAn entry in the board configuration portion of the
Update Control table. AdnBrdConfigUpdateCntlEntry .1.3.6.1.4.1.637.3.1.5.12.2.5.1 |
adnBrdConfigChassisIndexIndex field that identifies the chassis. Chassis are
numbered 1-7. The main chassis (i.e., the one with the
active Control Unit) in a multi-chassis node is chassis
number 1. In a single-chassis node, the chassis number is 1.
This number is provided in hardware by a HLCID card which
is plugged into the midplane. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.5.1.1 |
adnBrdConfigSlotIndexIndex field that identifies the slot. Slots within a
chassis are numbered 1-12. The first slot on the left when
facing the front of the chassis is number 1. This number is
provided in hardware through hard-wiring on the midplane.
Note that the HBSAC board always has a special slot
identifier of 30, but this slot number is never used. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.5.1.2 |
adnBrdConfigOperStatusThis object notifies the NMS of the results of the last
command, or whether it is still in progress.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.5.1.3 |
adnBrdConfigStateThis object notifies the NMS of the `state' of
configuration update processing. The values mean:
committed
loading configuration tables. Its
configuration tables are from the
committed version.
actInProgWaitingForLoadInd
is in progress. For this board,
the state machine is waiting for
an indication that all requests
to load tables have been received,
so that the loading can begin.
actInProgMiddleTransaction
is in progress, and for this board,
the state machine is waiting for
the response to a middle message
within a configuration transaction.
actInProgEndTransaction
is in progress, and for this board,
the state machine is waiting for the
response to a null message that
signals the end of a configuration
transaction.
uncommitted
configuration tables.
loadingCommittedNextFile
process of loading uncommitted
configuration tables.
The state machine is waiting for a
response to a null message that
signals the end of a transaction,
and will then send the next
configuration file, which will be the
rollback file.
loadingCommittedMiddleTrans
the process of loading committed
configuration tables. The state
machine is waiting for a response
to a middle message within the
configuration transaction.
loadingCommittedEndTrans
the process of loading committed
configuration tables. The state
machine is waiting for a response
to a null message that signals
the end of a transaction.
pending
and this board is currently down.
When the board comes up, it will be
loaded with the uncommitted
configuration file.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.5.1.4 |
adnBrdConfigFileNameThis object identifies the configuration file being used
for this board.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.2.5.1.5 |
adnBrdConfigNextFileNameThis object identifies the next configuration file to be
used for this board, if there is an automatic rollback
in progress from uncommitted configuration to committed
configuration. The value of this object is not significant
if there is currently no rollback in progress.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.2.5.1.6 |
adnBrdConfigNoCfgOrFullCfgThis object identifies whether a Parameteric File Xfer
Interface (PFXI) configuration file exists for this
chassis and slot. The values mean:
noConfig
fullConfig
deletedConfig
For some board types (such as High Speed Couplers), the
configuration parameters are managed entirely by the
Control Unit, not by the software running on the board
itself. In these cases there will be no configuration
file. When a coupler board has been deleted from the
uncommitted version, but still exists in the committed
version, the value of this object is set to deletedConfig.ro Enumeration .1.3.6.1.4.1.637.3.1.5.12.2.5.1.7 |
adnBrdFlashContentListTableThe board flash content list is a portion of the
Update Control group which contains information
about the contents of a board's flash memory. SEQUENCE OF AdnBrdFlashContentListEntry .1.3.6.1.4.1.637.3.1.5.12.2.6 |
adnBrdFlashContentListEntryAn entry in the board flash content portion of the
Update Control table. AdnBrdFlashContentListEntry .1.3.6.1.4.1.637.3.1.5.12.2.6.1 |
adnBrdFlashChassisIndexIndex field that identifies the chassis. Chassis
are numbered 1-7. The main chassis (i.e., the one
with the active Control Unit) in a multi-chassis
node is chassis number 1. In a single-chassis node,
the chassis number is 1. This number is provided
in hardware by a HLCID card which is plugged into
the midplane. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.1 |
adnBrdFlashSlotIndexIndex field that identifies the slot. Slots within
a chassis are numbered 1-12. The first slot on the
left when facing the front of the chassis is number
1. This number is provided in hardware through
hard-wiring on the midplane. Note that the HBSAC
board always has a special slot identifier of 30,
but this slot number is never used. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.2 |
adnBrdFlashSizeThis object identifies the coupler board flash
size in megabytes.ro INTEGER (-2147483648..2147483647) -- UNITS megabytes .1.3.6.1.4.1.637.3.1.5.12.2.6.1.3 |
adnBrdFlashVolume1This object identifies the flash image file name
loaded in the first volume of coupler flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.4 |
adnBrdFlashVolume2This object identifies the flash image file name
loaded in the second volume of coupler flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.5 |
adnBrdFlashVolume3This object identifies the flash image file name
loaded in the third volume of coupler flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.6 |
adnBrdFlashVolume4This object identifies the flash image file name
loaded in the fourth volume of coupler flash.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.12.2.6.1.7 |
adnVerInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.12.3 |
adnVerInfoNodeGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.12.3.1 |
adnNodeRunningVersionThis object identifies the pathname of the node-level
version descriptor file for the HSS software version that
is currently running. The format of the filename is
vd.<w><x><yy><zz>.<aa>, where
<w><x><yy><zz> is the HSS software version number and
<aa> is the value modulo 100 of the NMS configuration
number, which is incremented at the NMS whenever a new
HSS software and/or configuration package is built.
<w> is the product release number (1 digit, 0-9),
<x> is the functional version (1 digit, 0-9),
<yy> is the sub-function version within the <wx>
release (2 digits, 00-99),
<zz> is the fix version number, (2 digits, 01-99), and
<aa> is a number that the Network Management System
assigns to insure uniqueness of the version number,
(2 digits, 00-99).ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.3.1.1 |
adnNodeCommittedVersionThis object identifies the pathname of the node-level
version descriptor file for the committed (validated)
HSS software version. The format of the filename is
vd.<w><x><yy><zz>.<aa>, where
<w><x><yy><zz> is the HSS software version number and
<aa> is the value modulo 100 of the NMS configuration
number, which is incremented at the NMS whenever a new
HSS software and/or configuration package is built.
<w> is the product release number (1 digit, 0-9),
<x> is the functional version (1 digit, 0-9),
<yy> is the sub-function version within the <wx>
release (2 digits, 00-99),
<zz> is the fix version number, (2 digits, 01-99), and
<aa> is a number that the Network Management System
assigns to insure uniqueness of the version number,
(2 digits, 00-99).ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.3.1.2 |
adnNodeUncommittedVersionThis object identifies the pathname of the node-level
version descriptor file for the uncommitted (non-validated)
HSS software version. The format of the filename is
vd.<w><x><yy><zz>.<aa>, where
<w><x><yy><zz> is the HSS software version number and
<aa> is the value modulo 100 of the NMS configuration
number, which is incremented at the NMS whenever a new
HSS software and/or configuration package is built.
<w> is the product release number (1 digit, 0-9),
<x> is the functional version (1 digit, 0-9),
<yy> is the sub-function version within the <wx>
release (2 digits, 00-99),
<zz> is the fix version number, (2 digits, 01-99), and
<aa> is a number that the Network Management System
assigns to insure uniqueness of the version number,
(2 digits, 00-99).
If there is no uncommitted software version, then a null
string is returned.ro OCTET STRING .1.3.6.1.4.1.637.3.1.5.12.3.1.3 |
adnNodeNMSCommitNumberThis object is the NMS configuration number of the
HSS version (software and configuration package) which
is committed at the HSS. It is set by the NMS as part of
the commit procedure.rw INTEGER .1.3.6.1.4.1.637.3.1.5.12.3.1.4 |
adnNodeNMSBuildNumberThis object is the NMS configuration number of the
HSS version (software and configuration package) which
is transferred to and activated at the HSS. It is set
by the NMS right after the install procedure.rw INTEGER .1.3.6.1.4.1.637.3.1.5.12.3.1.5 |
adnNodeNMSQbuildNumberThis object is the NMS configuration number of the
HSS configuration version built using the Quick
interface which is transferred to and activated at
the HSS. It is incremented by the NMS after each
qConfirm command, and reset after each qRebaseline
command.rw INTEGER .1.3.6.1.4.1.637.3.1.5.12.3.1.6 |
adn3rdPartyMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.13 |
adn3rdPartyCardTableA list of third party card entries and attributes
needed by network management.
This is an extension to the adnEquipTable
for third party card entries. SEQUENCE OF Adn3rdPartyCardEntry .1.3.6.1.4.1.637.3.1.5.13.1 |
adn3rdPartyCardEntryA card entry containing objects that
represent the access address and parameters
that can be displayed in the NMS. Adn3rdPartyCardEntry .1.3.6.1.4.1.637.3.1.5.13.1.1 |
adn3rdPartyCardDescrA textual string describing the card.
Common Name: Descriptionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.13.1.1.1 |
adn3rdPartyCardLocAddrTypeCard's address type.
Common Name: Address Typero Enumeration .1.3.6.1.4.1.637.3.1.5.13.1.1.2 |
adn3rdPartyCardLocAddressAddress of card.
Common Name: Addressro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.13.1.1.3 |
adnClock OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.14 |
adnClockConfigTableThe system clock configuration table. SEQUENCE OF AdnClockConfigEntry .1.3.6.1.4.1.637.3.1.5.14.1 |
adnClockConfigEntryAn entry in the system clock configuration table. AdnClockConfigEntry .1.3.6.1.4.1.637.3.1.5.14.1.1 |
adnClockIfIndexThe value of this object corresponds to the
ifIndex and it uniquely identifies a DS1/E1 line.ro INTEGER .1.3.6.1.4.1.637.3.1.5.14.1.1.1 |
adnClockTypeThis object defines the type of DS1/E1 line.ro Enumeration .1.3.6.1.4.1.637.3.1.5.14.1.1.2 |
adnClockStatusThe system clock status can be determined by looking
at this object for both the primary and backup lines.
If the status is failed for both lines, it implies
that the system timing is provided by a local clock.
If the status is failed in the primary line and good in
the backup line, it implies that the system timing is
provided by the backup line.
If the status is good in the primary line, it
implies that the system timing is provided by the
primary line.ro Enumeration .1.3.6.1.4.1.637.3.1.5.14.1.1.3 |
adnClockSourceThe system clock source is typically derived from
the line(1). In a network with no other suitable
clock source, one HSS can be designated as the clock
source for the entire network. That HSS would be
configured as internal(2) for its primary and backup.
All other HSS in the network would still use the
value line(1).ro Enumeration .1.3.6.1.4.1.637.3.1.5.14.1.1.4 |
adnNodeSupervisionMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.15 |
adnChassisTableThis is the chassis table. SEQUENCE OF AdnChassisEntry .1.3.6.1.4.1.637.3.1.5.15.1 |
adnChassisEntryAn entry in the chassis table. There is one
entry for each chassis.
The index corresponds to equipment
type 'chassis' in the adnEquipTable. AdnChassisEntry .1.3.6.1.4.1.637.3.1.5.15.1.1 |
adnChassisStatusThis variable indicates the chassis status.
It is a bit map represented as a sum;
therefore, it can represent multiple failures.
The bit positions are:
1 : power supply failure
4 : fan failure
8 : temperature warning
16 : SAC card (Status and Alarm Control) failure
32 : ISL (Internal Serial Link) bus failure
detected on the active CU
64 : IOS (Input Output Service) bus failure
detected on the active CU
128 : IOS (Input Output Service) bus silence
detected on the active CU
256 : ISL (Internal Serial Link)
bus state unknown on the active CU
512 : IOS (Input Output Service)
bus state unknown on the active CU
N.B.: This variable is significant when the operational
state of the chassis is disabled. When there is no
chassis error, this variable has the value 0.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.1 |
adnChassisOperFanIdThis variable identifies the fan trays which are
operational.
It is a bit map represented as a sum;
therefore, it can represent multiple fan trays in the
operational state.
Each bit position represents a fan tray.
If the bit is set, the fan tray is operational.
If the bit is not set, the fan tray is not operational.
The bit positions are:
1 : Fan tray number 1 is operational
2 : Fan tray number 2 is operational
Note: This information is not significant if the fan tray
is not present in the chassis.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.2 |
adnChassisPresentFanIdThis variable identifies the fan trays which are
present in the chassis.
It is a bit map represented as a sum; therefore it can
represent multiple fan trays in the chassis.
Each bit position represents a fan tray.
If the bit is set, the fan tray is present.
If the bit is not set, the fan tray is absent.
The bit positions are:
1 : Fan tray number 1 is present
2 : Fan tray number 2 is present.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.3 |
adnChassisOperPowerIdThis variable identifies the power supplies which
are operational.
It is a bit map represented as a sum;
therefore, it can represent
multiple power supplies in the operational state.
Each bit position represents a power supply.
If the bit is set, the power supply is operational.
If the bit is not set, the power supply is not
operational.
The bit positions are:
1 : Power supply number 1 is operational
2 : Power supply number 2 is operational
4 : Power supply number 3 is operational
8 : Power supply number 4 is operational
16 : Power supply number 5 is operational
32 : Power supply number 6 is operational.
Note: This information is not significant if the power
supply is not present in the chassis.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.4 |
adnChassisPresentPowerIdThis variable identifies the power supplies which
are present in the chassis.
It is a bit map represented as a sum; therefore, it can
represent multiple power supplies in the chassis.
Each bit position represents a power supply.
If the bit is set, the power supply is present.
If the bit is not set, the power supply is absent.
The various bit positions are:
1 : Power supply number 1 is present
2 : Power supply number 2 is present
4 : Power supply number 3 is present
8 : Power supply number 4 is present
16 : Power supply number 5 is present
32 : Power supply number 6 is present.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.5 |
adnChassisSlotNumberThis variable indicates the number of slots
in the chassis.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.6 |
adnChassisPrimaryMSC8kSourceIfIndexThis variable identifies the master line timing
source .
In spite of the name, which is like this for
historical reasons, the line timing source can be
MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed
Coupler) or SDH HSC line timing source.
The value of this object corresponds to the
ifIndex of the line which provides the source.
The value 0 is used when there is no
master line timing source located on the chassis.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.7 |
adnChassisBackupMSC8kSourceIfIndexThis variable identifies the backup line timing
source .
In spite of the name, which is like this for
historical reasons, the line timing source can be
MSC (Medium Speed Coupler) 8kHz, PDH HSC (High Speed
Coupler) or SDH HSC line timing source.
The value of this object corresponds to the
ifIndex of the line which provides the source.
The value 0 is used when there is no
backup line timing source located on the chassis.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.8 |
adnChassisMidplaneClockStatusThis object provides the status of the reference
clocks on the chassis midplane. It is a bit map
and a set bit indicates clock presence.
The bit positions refer to the following clock references:
1 - primary 8 kHz MSC (Medium Speed Coupler) - (H80B)
2 - backup 8 kHz MSC - (H81B)
4 - primary SDH (Synchronous Digital Hierarchy)
8 - backup SDH
16 - primary PDH (Plesiochronous Digital Hierarchy)
32 - backup PDH
In a multi-chassis system, a value of 0 indicates that
all clock references are down. In a single-chassis system,
the value of this object is 0.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.9 |
adnChassisClockPropagationStatusThis object provides the status of the clock propagated from
this chassis to the next. It is a bit map and a set bit
indicates that the clock is present.
1 - primary 8 kHz MSC (Medium Speed Coupler)
2 - backup 8 kHz MSC
4 - primary line timing (LT0)
8 - backup line timing (LT1)
16 - primary SDH (Synchronous Digital Hierarchy)
32 - backup SDH
64 - primary PDH (Plesiochronous Digital Hierarchy)
128 - backup PDH
A value of 0 indicates that no clocks are being
propagated. Note that the value of this object is
0 for a single-chassis system.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.10 |
adnChassisRABUsageThis variable indicates the slot number of the
primary card which uses the RAB ( Redundancy Applique Bus).
The value zero indicates that the RAB is not used.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.11 |
adnChassisStandbyCUBusStatusThis variable indicates the failures of the busses
connected between the chassis and
the standby CU ( Control Unit) card.
It is a bit map represented as a sum;
therefore it can represent multiple failures.
The value zero indicates that there is no failure.
The bit positions are :
32 : ISL (Internal Serial Link) bus failure
detected on the standby CU
64 : IOS (Input Output Service) bus failure
detected on the standby CU
128 : IOS (Input Output Service) bus silence
detected on the standby CU
256 : ISL (Internal Serial Link) bus state
unknown on the standby CU
512 : IOS (Input Output Service) bus state
unknown on the standby CU.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.1.1.12 |
adnBoardTableThis table is the board table. SEQUENCE OF AdnBoardEntry .1.3.6.1.4.1.637.3.1.5.15.2 |
adnBoardEntryAn entry in the board table. There is one entry for each
board configured. The index corresponds to equipment type
'card' in the adnEquipTable. AdnBoardEntry .1.3.6.1.4.1.637.3.1.5.15.2.1 |
adnBoardAppliqueTypeThis indicates the configured applique type.ro AdnAppliqueType .1.3.6.1.4.1.637.3.1.5.15.2.1.3 |
adnBoardAppliqueStateThis indicates the operational state of an applique which
is either present or absent or wrong or inaccessible.
The value inaccessible is used when the board is absent
and its applique can not be detected.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.4 |
adnBoardApplPluggedTypeThis indicates the type of applique that is plugged in.ro AdnAppliqueType .1.3.6.1.4.1.637.3.1.5.15.2.1.5 |
adnBoardPluggedTypeThis indicates the type of board that is plugged in.
If no board is plugged in, this MIB object value should is set
to the OBJECT IDENTIFIER { 0 0 }.ro AutonomousType .1.3.6.1.4.1.637.3.1.5.15.2.1.6 |
adnBoardRedundancyRoleThis indicates the redundancy role of the card.
A value of noRedundancy(1) is used for cards that do not
support redundancy. Cards that support redundancy, but
do not have a spare configured have a value of primary(2).
For the CU (Control Unit) board, this object is not
significant and its value is always zero.
value state
-
0 not significant ( for CU board).
1 this card does not support redundancy.
2 primary : this card can be backed up by another
board in case of failure.
3 spare : the card can back up another card
in case of failure.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.7 |
adnBoardRedundancyStatusThis indicates the redundancy status of the card.
A card that does not support redundancy is considered
a primary running for itself.
For the CU (Control Unit) board, this object is not
significant and its value is always zero.
value status
-
0 not significant ( for CU board).
1 this card is a primary running for itself.
2 this card is an idle spare.
3 this card is a spare card running in place
of a primary card.
4 a switchover to spare is in progress.
5 a switchback to primary is in progress.
6 the card is a primary card that is not
running; a spare is running in its place.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.8 |
adnBoardRedundancyFailureThe value of this object is a bitmap that qualifies
the switchover or the switchback failures.
When the value of this object is 0, none of the
failures is present.
For the CU (Control Unit) board, this object is
not significant and its value is always zero.
bit position failure
0 no failure
1 the primary card is not available
for the switchback
2 no spare card is available for the switchover
4 RAB (Redundancy Applique Bus) busy :
see adnChassisRABUsage in adnChassisTable
8 the applique switchover from the primary
card to the spare card has failedro INTEGER .1.3.6.1.4.1.637.3.1.5.15.2.1.9 |
adnBoardRedundantBindFor a primary card, this variable indicates
the adnEquipIndex of the spare card which
backs up this primary card.
For a spare card, this variable indicates
the adnEquipIndex of the primary card which
is backed up by this spare card.
The value zero indicates no relationship.
For the CU (Control Unit) board, this object is
not significant and its value is always zero.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.2.1.10 |
adnBoardSwitchCauseThe value of this object gives the reason
why the switchover or the switchback has been initiated.
This object qualifies the object
adnBoardRedundancyFailure.
For the CU (Control Unit) board, this object is
not significant and its value is always zero.
value cause
-
0 not significant ( for CU board)
1 neither switchover nor switchback occurred
2 manual switchover
3 automatic switchover
4 manual switchback
5 semiautomatic switchback
6 automatic switchbackro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.11 |
adnBoardFaultStatusFor values 1 to 8 :
this variable gives details on transitory failures
of a CU (Control Unit) card.
Other values :
this variable gives details on failures on signals
from or to a BBSYN card.
For the other cards, this variable is not significant;
see adnEquipTrapCause to know the reason of the last
failure.
The value zero indicates that there is no such type
of failure.
value failure
-
1 : Hardware problem on one LSN link (Local Sub-Network).
2 : At least one partition on this card is desynchronized.
3 : No contact is possible with this card.
4 : Hardware error.
5 : An error occurred during the initialization.
6 : The rebuild has failed.
7 : The rebuild of the card has to be done by
the HSS supervision.
8 : Unknown software or firmware version
601 : primary external source recovery
602 : primary external source loss of signal
603 : primary external source qualification failure
604 : primary external source Alarm Indication Signal
605 : primary external source Loss Of Frame
606 : primary external source Excessive Error Indication
607 : primary external source Message failure indication
701 : secondary external source recovery
702 : secondary external source loss of signal
703 : secondary external source qualification failure
801 : primary line timing source recovery
802 : primary line timing source loss of signal
803 : primary line timing source qualification failure
901 : secondary line timing source recovery
902 : secondary line timing source loss of signal
903 : secondary line timing source qualification failure
1001 : partner BBSYN signal recovery
1002 : partner BBSYN loss of signal
1003 : partner BBSYN signal qualification failure
1101 : PDH output enable
1102 : PDH output disable
1201 : SDH output enable
1202 : SDH output disable
1301 : MSC output enable
1302 : MSC output disable.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.12 |
adnBoardServiceIndicatorAn indication of the services supported by this board.
Boards of the same physical type may have different values
for this object, depending on the services configured for
the board by the NMS operator.
The selection of services may also cause different software
to be loaded onto the board. For the same physical board
type, the software load list (SLL) may contain multiple
entries, each qualified using a different value of this
object as a selector.
Value Meaning
notSpecified(1) No specific indication is available.
- This value is used for boards with
- no service assignment (such as a
- board in the 'spare' redundancy
- role).
-
nodeAdmin(2) Node administration and management
- services.
-
atmSwitching(3) ATM switching services.
-
frAccessAndTrunk(4) Frame relay access and trunk
- services.
-
frxAccess(5) PSX FRX (Frame Relay eXchange)
- access service.
-
frTrunkOverAtm(6) Frame relay trunking over ATM.
-
frxTrunkOverAtm(7) PSX FRX trunking over ATM.
-
atmAccessAndTrunk(8) ATM access and trunk services.
-
frAccessOverAtm(9) Frame relay access over ATM using
- Frame Relay Forum (FRF) scenario 1,
- scenario 2 and service interworking.
-
frAccessAndTrunkOverAtm(10)
- Frame relay access and trunking
- over ATM. The access service uses FRF
- network scenario 1, scenario 2 and
- service interworking.
-
circuitEmulation(11) Circuit emulation services.
-
nodeSync(12) Node-level clock synchronization
- services.
-
ipForwarding(13) IP routing over Frame Relay or ATM.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.13 |
adnBoardTestResultThe value of this object gives the hardware tests
or rebuild result.
For boards other than CU (Control Unit) boards,
this object is not significant and its value is always zero.
value result
-
0 not significant
1 other result
2 The test or rebuild has been successfuly executed
and no problem has been detected
3 Internal error : HSS software error
4 Action aborted : the test or rebuilt has aborted
during execution
5 Hardware tests not OK : the hardware tests have been
executed but the result is hardware problem.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.2.1.14 |
adnEepromTableThis table is the EEPROM table. SEQUENCE OF AdnEepromEntry .1.3.6.1.4.1.637.3.1.5.15.3 |
adnEepromEntryAn entry in the EEPROM table. There is one entry for a
given board, as there is one EEPROM on each board.
The index corresponds to equipment type
'card' in the adnEquipTable. AdnEepromEntry .1.3.6.1.4.1.637.3.1.5.15.3.1 |
adnEepromSerialNumberThis indicates the serial number of the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.1 |
adnEepromBoardNameThis indicates the card type mnemonic.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.2 |
adnEepromPartNumberAndVariantThis indicates the Alcatel code for the card and its variant.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.3 |
adnEepromIcsThis indicates the Item Change Status of the card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.4 |
adnEepromIcsChangeDateThis indicates the date of application of a change order.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.5 |
adnEepromFlashIdentifierThis identifies the software loaded on flash EPROM.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.6 |
adnEepromLastRepairDateThis indicates the date of most recent repair.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.7 |
adnEepromWarrantyEndDateThis indicates the date of end of warranty.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.15.3.1.8 |
adnAeiPortTableThis table is the AEI (ATM Electrical Interface) port
table. SEQUENCE OF AdnAeiPortEntry .1.3.6.1.4.1.637.3.1.5.15.4 |
adnAeiPortEntryAn entry in the AEI (ATM Electrical Interface) port table.
There is one entry for each port of a given ATM board,
that is, two entries for HSC (High Speed Coupler)
and CIG (Cell Interconnection Gateway) boards,
sixteen entries for ASE (ATM Switching Element) boards.
The index corresponds to equipment type 'aeiPort' in
the adnEquipTable. AdnAeiPortEntry .1.3.6.1.4.1.637.3.1.5.15.4.1 |
adnAeiPortActiveOrNotThis indicates the active/standby mode of the port;
it applies to all ATM boards.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.4.1.1 |
adnAeiPortErOrWngStatusThis variable indicates the gravity of a port failure.
It is a bit map represented as a sum.
Each bit position maps to the corresponding position in
the nominator adnAeiPortStatus (which defines the port's
failure status).
The adnAeiPortErOrWngStatus bit classifies the failure as
either an error (value '1') or a warning (value '0').
A bit value of '0' can also mean the failure
classification does not apply to the failure status.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.15.4.1.2 |
adnAeiPortStatusThis variable indicates the port status. It is a
bit map represented as a sum; therefore it can represent
multiple failures.
For all ATM boards, except the ASE (ATM Switching Element)
board, the bit positions are listed below.
Errors followed by an asterisk apply to ASE boards.
1 : adnAeiPortOOS* out-of-synchronization
ATM Electrical Interface
4 : adnAeiPortNFOF* network FIFO overflows
8 : adnAeiPortIEMRAMP BGIEM chip RAM parity
errors
16 : adnAeiPortCECH* corrected errors in cell
header
32 : adnAeiPortUCECH* uncorrected errors in
cell header
64 : adnAeiPortCRCMA1 CRC errors on payload
field of MA1 (Active Maintenance type 1) cells
128 : adnAeiPortCRCSIC CRC errors on payload
field of SIC (Self Identified Cell) cells
256 : adnAeiPortNPE* parity errors on payload
4096 : adnAeiPortNMA1* no active maintenance
cell received
16384 : adnAeiPortEMA1* error active maintenance
cell received
131072 : adnAeiPortNSFOF network signalling FIFO
overflow
262144 : adnAeiPortNFWF network FIFO write failure
524288 : adnAeiPortSFWF signalling FIFO write
failure
1048576 : adnAeiPortNSFRF network signalling FIFO
read failure
4194304 : adnAeiPortUSFRF user signalling FIFO
read failure
8388608 : adnAeiPortUFWF user FIFO write failure
16777216 : adnAeiPortUSFOF user signalling FIFO
overflow
33554432 : adnAeiPortNICI* cells received on
non-active ICI (Internal Communication
Interface)
67108864 : adnAeiPortNCRC CRC errors detected on
network side
134217728 : adnAeiPortNAAL* AAL (ATM Adaptation Layer)
sequence error on network side
268435456 : adnAeiPortUCRC* CRC errors detected on
user side
536870912 : adnAeiPortUAAL AAL sequence error on
user side
For the ASE (ATM Switching Element) board, there are
specific defects corresponding to the following bit
positions :
2 : adnAeiPortLOS loss-of-synchronization AEI
512 : adnAeiPortRTAG error in routing tag data
1073741830: adnAeiPortURC unrouted cells
N.B.: This variable is significant when the operational
state of the port is disabled.
When there is no port error, this variable has the value 0.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.15.4.1.3 |
adnAeiPortTestResultThis is the result of the last test launched on the port.
It is a bit map represented as a sum; therefore
each bit corresponds to a possible cause for a failing
test result ('0' if test succeeded, '1' if test failed).
For HSC (High Speed Coupler) or CIG (Cell Interconnection
Gateway) boards, the bit positions are:
1 : failure in the BGIEM chip RAM
2 : failure in loopback test in the BGAEI chip.
For ASE (ATM Switching Element) boards, the bit position
is:
2 : failure in loopback test in the BGAT1 chip.
N.B.: When no test has been launched, this variable has
the value zero.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.15.4.1.4 |
adnAeiPortLinkIdThis is the adnEquipIndex of the AEI (ATM Electrical
Interface) port on the ASE (ATM Switching Element) board
which is linked with this AEI port.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.4.1.5 |
adnProcessorTableThis table is the processor table. SEQUENCE OF AdnProcessorEntry .1.3.6.1.4.1.637.3.1.5.15.6 |
adnProcessorEntryAn entry in the processor table. There is one entry for
each processor of a given board.
The index corresponds to equipment type 'processor'
in the adnEquipTable. AdnProcessorEntry .1.3.6.1.4.1.637.3.1.5.15.6.1 |
adnProcessorErOrWngStatusThis variable indicates the gravity of a processor
failure.
It is a bit map represented as a sum.
Each bit position maps to the corresponding position in
the nominator adnProcessorStatus (which defines the
processor's failure status).
The adnProcessorErOrWngStatus bit classifies the failure
as either an error (value '1') or a warning (value '0').
A bit value of '0' can also mean the failure
classification does not apply to the failure status.rodeprecated INTEGER .1.3.6.1.4.1.637.3.1.5.15.6.1.1 |
adnProcessorStatusThis variable indicates the processor status. It is a bit
map represented as a sum;
therefore it can represent multiple failures.
This variable is only significant for ATM board
processors.
For all ATM boards except the ASE (ATM Switching
Element),the bit positions are :
1 : adnProcessorUFOF user FIFO overflow
2 : adnProcessorUFRF user FIFO read failure
4 : adnProcessorNFOF network FIFO overflow
8 : adnProcessorPHTRAMP BGPHT chip RAM parity
error
16 : adnProcessorNFRF network FIFO read failure
32 : adnProcessorNAVC cells received on
non-active VC
64 : adnProcessorNAVP cells received on
non-active VP
128 : adnProcessorRBOF reception cell buffer
overflow
512 : adnProcessorPWF power failure
For the ASE board, the bit positions are :
16384 : adnProcessorQRP0RAMP BGQRP-0 chip RAM parity
error
32768 : adnProcessorQRP0DMA BGQRP-0 chip DMA
(Direct Memory Access) error
65536 : adnProcessorQRP0FIFO BGQRP-0 chip extraction
FIFO error
131072 : adnProcessorQRP1RAMP BGQRP-1 chip RAM parity
error
262144 : adnProcessorQRP1DMA BGQRP-1 chip DMA error
524288 : adnProcessorQRP1FIFO BGQRP-1 chip extraction
FIFO error
1048576 : adnProcessorQRP2RAMP BGQRP-2 chip RAM parity
error
2097152 : adnProcessorQRP2DMA BGQRP-2 chip DMA error
4194304 : adnProcessorQRP2FIFO BGQRP-2 chip extraction
FIFO error
8388608 : adnProcessorQRP3RAMP BGQRP-3 chip RAM parity
error
16777216 : adnProcessorQRP3DMA BGQRP-3 chip DMA error
33554432 : adnProcessorQRP3FIFO BGQRP-3 chip extraction
FIFO error
67108864 : adnProcessorHMP0LLPC BGHMP-0 chip loss of
low-priority cells
134217728 : adnProcessorHMP0LHPC BGHMP-0 chip loss of
high-priority cells
268435456 : adnProcessorHMP0SYNC BGHMP-0 chip
synchronization fault
536870912 : adnProcessorHMP1LLPC BGHMP-1 chip loss of
low-priority cells
1073741824: adnProcessorHMP1LHPC BGHMP-1 chip loss of
high-priority cells
2147483648: adnProcessorHMP1SYNC BGHMP-1 chip
synchronization fault
N.B.: This variable is significant when the operational
state of the processor is disabled.
When there is no processor error, this
variable has the value 0.rodeprecated INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.6.1.2 |
adnIfAssignmentTableThis table maps an ifIndex to its location. SEQUENCE OF AdnIfAssignmentEntry .1.3.6.1.4.1.637.3.1.5.15.15 |
adnIfAssignmentEntryAn entry in the ifIndex assignment table. AdnIfAssignmentEntry .1.3.6.1.4.1.637.3.1.5.15.15.1 |
adnIfAssignmentChassisThe chassis number where the control application of the
ifIndex runs.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.15.1.1 |
adnIfAssignmentSlotThe slot number where where the control application of
the ifIndex runs.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.15.1.2 |
adnIfAssignmentLineThe line number attached to the control application of
the ifIndex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.15.1.3 |
adnIfAssignmentCtrlAppliThe control application identifier of the ifIndex.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.15.1.4 |
adnIfAssignmentLowIndexThe ifIndex of the subordinate layer of this ifIndex.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.15.15.1.5 |
adnIfAssignmentTSIThis indicates whether or not the ifIndex layer is at the
top of a protocol stack.ro Enumeration .1.3.6.1.4.1.637.3.1.5.15.15.1.6 |
adnIpAddrAssignmentTableThis table maps an ipIndex to its associate ifIndex SEQUENCE OF AdnIpAddrAssignmentEntry .1.3.6.1.4.1.637.3.1.5.15.16 |
adnIpAddrAssignmentEntryAn entry in the ipIndex assignment table. AdnIpAddrAssignmentEntry .1.3.6.1.4.1.637.3.1.5.15.16.1 |
adnIpAddressThis value is the ipIndex IpAddress .1.3.6.1.4.1.637.3.1.5.15.16.1.1 |
adnIpAddrAssignmentIfindexThis value is the associate ifindex
to an ipIndexro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.16.1.2 |
adnAtmBoardErCounterTableThis table is the ATM boards error counter table.
Each counter corresponds to a defect number
identified by a bit set in the adnProcessorStatus
of the adnProcessorTable.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board. SEQUENCE OF AdnAtmBoardErCounterEntry .1.3.6.1.4.1.637.3.1.5.15.21 |
adnAtmBoardErCounterEntryAn entry in the ATM boards error counter table. AdnAtmBoardErCounterEntry .1.3.6.1.4.1.637.3.1.5.15.21.1 |
adnAtmBoardErOrWgStatusThis variable indicates the gravity of a processor
failure.
It is a bit map represented as a sum.
Each bit position maps to the corresponding position in
the nominator adnASEBoardStatus, adnCIGBoardStatus or
adnHSCBoardStatus (which defines the processor's failure
status).
The adnAtmBoardErOrWgStatus bit classifies the failure
as either an error (value '1') or a warning (value '0').
A bit value of '0' can also mean the failure
classification does not apply to the failure status.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.21.1.1 |
adnAtmBoardASEStatusThis variable indicates the processor status. It is a bit
map represented as a sum;
therefore it can represent multiple failures.
This variable is only significant for the matrix
boards.
The bit positions are :
16384 : adnAtmBoardErQRP0RAMP BGQRP-0 chip RAM parity
error
65536 : adnAtmBoardErQRP0FIFO BGQRP-0 chip extraction
FIFO overflow
131072 : adnAtmBoardErQRP1RAMP BGQRP-1 chip RAM parity
error
524288 : adnAtmBoardERQRP1FIFO BGQRP-1 chip extraction
FIFO overflow
1048576 : adnAtmBoardErQRP2RAMP BGQRP-2 chip RAM parity
error
4194304 : adnAtmBoardErQRP2FIFO BGQRP-2 chip extraction
FIFO overflow
8388608 : adnAtmBoardErQRP3RAMP BGQRP-3 chip RAM parity
error
33554432 : adnAtmBoardErQRP3FIFO BGQRP-3 chip extraction
FIFO overflow
67108864 : adnAtmBoardErHMPLLPC loss of low priority
cells
134217728 : adnAtmBoardErHMPLHPC loss of high priority
cells
268435456 : adnAtmBoardErHMP0SYNC BGHMP-0 chip
synchronization fault
2147483648: adnAtmBoardErHMP1SYNC BGHMP-1 chip
synchronization fault
N.B.: This variable is significant when the operational
state of the processor is enabled.
When there is no processor error, this
variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.21.1.2 |
adnAtmBoardCIGStatusThis variable indicates the processor status. It is a bit
map represented as a sum;
therefore it can represent multiple failures.
This variable is only significant for CIG boards.
The bit positions are :
1 : adnAtmBoardErUFOF user FIFO overflow
2 : adnAtmBoardErUFRF user FIFO read failure
4 : adnAtmBoardErNFOF network FIFO overflow
8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity
error
16 : adnAtmBoardErNFRF network FIFO read failure
128 : adnAtmBoardErRBOF receipt cell buffer
overflow
4096 : adnAtmBoardErAPPLIQ applique not present
N.B.: This variable is significant when the operational
state of the processor is enabled.
When there is no processor error, this
variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.21.1.3 |
adnAtmBoardHSCStatusThis variable indicates the processor status.It is a bit
map represented as a sum;
therefore it can represent multiple failures.
This variable is only significant for HSC boards,
except CEM8 boards.
For all HSC boards except BBTS1C and BBTP3C boards,
the bit positions are :
1 : adnAtmBoardErUFOF user FIFO overflow
2 : adnAtmBoardErUFRF user FIFO read failure
4 : adnAtmBoardErNFOF network FIFO overflow
8 : adnAtmBoardErPHTRAMP BGPHT chip RAM parity
error
16 : adnAtmBoardErNFRF network FIFO read failure
128 : adnAtmBoardErRBOF receipt cell buffer
overflow
512 : adnAtmBoardErLIRC0 loss of signal on IRC0
1024 : adnAtmBoardErLIRC1 loss of signal on IRC1
4096 : adnAtmBoardErAPPLIQ applique not present
For the BBE1B and BBT1B boards, there are specific defects
corresponding to the following bit positions :
8192 : adnAtmBoardErFIFO rate reduction FIFO
overflow
16384 : adnAtmBoardErFIFC rate reduction FIFO cell
alignment failure
32768 : adnAtmBoardErBGETB loss of cell synchronization
65536 : adnAtmBoardErBGETB upwards start of cell error
in BGMUX(or BGMUX 2)
For the BBTS1C and BBTP3C boards,the bit positions are :
1 : adnAtmBoardErPHT0FIF0 FIFO defect on PHT2-0
2 : adnAtmBoardErPHT0FIF1 FIFO defect on PHT2-1
4 : adnAtmBoardErPHT0FIF2 FIFO defect on PHT2-2
8 : adnAtmBoardErPHT0FIF3 FIFO defect on PHT2-3
512 : adnAtmBoardErLIRC0 loss of signal on IRC0
1024 : adnAtmBoardErLIRC1 loss of signal on IRC1
4096 : adnAtmBoardErAPPLIQ applique not present
8192 : adnAtmBoardErUFOF user side FIFO overflow
16384 : adnAtmBoardErUFE user side FIFO error
32768 : adnAtmBoardErEFOV extraction FIFO overflow
65636 : adnAtmBoardErQRPPRAMP QRP RAM parity error
131072 : adnAtmBoardErDRAME DRAM ECC error
262144 : adnAtmBoardErDCSE downwards cell syncho
error
524288 : adnAtmBoardErDRFOV downwards receiving FIFO
overflow
1048576 : adnAtmBoardErRFORRF rate reduction FIFO
overflow
2097152 : adnAtmBoardErDCMOV downwards cell memory
overflows
4194304 : adnAtmBoardErDCMME downwards cell memory
management error
8388608 : adnAtmBoardErUCSE upwards cell synchro
error
16777216 : adnAtmBoardErURFOV upwards receiving FIFO
overflow
33554432 : adnAtmBoardErUCMOV upwards cell memory
overflow
67108864 : adnAtmBoardErUCMME upwards cell memory
management error
1342177728: adnAtmBoardErULMA0OV upwards LMA0 overflow
N.B.: This variable is significant when the operational
state of the processor is enabled.
When there is no processor error, this
variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.21.1.4 |
adnAtmBoardErQRP0RAMPCounterThe counter associated with the number of the first
QRP chip RAM parity errors;
counter #14 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.5 |
adnAtmBoardErQRP0FIFOCounterThe counter associated with the number of the first
QRP chip extraction FIFO overflows;
counter #16 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.6 |
adnAtmBoardErQRP1RAMPCounterThe counter associated with the number of the
second QRD chip RAM parity errors;
counter #17 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.7 |
adnAtmBoardErQRP1FIFOCounterThe counter associated with the number of the
first QRP chip extraction FIFO overflows;
counter #19 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.8 |
adnAtmBoardErQRP2RAMPCounterThe counter associated with the number of the
second QRP chip RAM parity errors;
counter #20 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.9 |
adnAtmBoardErQRP2FIFOCounterThe counter associated with the number of the
second QRP chip extraction FIFO overflows;
counter #22 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.10 |
adnAtmBoardErQRP3RAMPCounterThe counter associated with the number of the
third QRP chip RAM parity errors;
counter #23 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.11 |
adnAtmBoardErQRP3FIFOCounterThe counter associated with the number of the
third QRP chip extraction FIFO overflows;
counter #25 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.12 |
adnAtmBoardErHMPLLPCCounterThe counter associated with the number of
low priority cells lost due to Selective
Cell Discard (SCD);
counter #26 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.21.1.13 |
adnAtmBoardErHMPLHPCCounterThe counter associated with the number of high
priority cells lost due to buffer overflow (FULC);
counter #27 of the ATM core;
this counter is only relevant for the matrix board.rodeprecated Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.21.1.14 |
adnAtmBoardErHMP0SYNCCounterThe counter associated with the number of fault
synchronization in the first HMP chip;
counter #28 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.15 |
adnAtmBoardErHMP1SYNCCounterThe counter associated with the number of fault
synchronization in the second HMP chip;
counter #31 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.16 |
adnAtmBoardErUFOFCounterThe counter associated with the number of user
FIFO overflows;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.17 |
adnAtmBoardErUFRFCounterThe counter associated with the number of user
FIFO read failures;
counter #1 of the ATM core;
this counter is not relevant for the matrix board,
for the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.18 |
adnAtmBoardErNFOFCounterThe counter associated with the number of network
FIFO overflows;
counter #2 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.19 |
adnAtmBoardErPHTRAMPCounterThe counter associated with the number of BGPHT
chip RAM parity errors;
counter #3 of the ATM core;
this counter is not relevant for the matrix board,
the HBCEx boards, the BBTS1C boards and for
the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.20 |
adnAtmBoardErNFRFCounterThe counter associated with the number of network
FIFO read failures;
counter #4 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.21 |
adnAtmBoardErNAVCCounterThe counter associated with the number of cells
received on non active VC;
counter #5 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.roobsolete Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.21.1.22 |
adnAtmBoardErNAVPCounterThe counter associated with the number of cells
received on non active VP;
counter #6 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.roobsolete Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.21.1.23 |
adnAtmBoardErRBOFCounterThe counter associated with the number of
reception buffer overflows;
counter #7 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.24 |
adnAtmBoardErAPPLIQCounterThe counter associated with the duration of
applique missing.
expressed in milliseconds;
counter #12 of the ATM core;
this counter is not relevant for the matrix board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.25 |
adnAtmBoardErLIRC0CounterThe counter associated with the number of loss of
signal on IRC0;
counter #9 of the ATM core;
this counter is only relevant for a HSC board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.26 |
adnAtmBoardErLIRC1CounterThe counter associated with the duration of loss of
signal on IRC1.
expressed in milliseconds;
counter #10 of the ATM core;
this counter is only relevant for a HSC board.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.27 |
adnAtmBoardErRFIFOCounterThe counter associated with the duration of rate
reduction FIFO overflows (from ET to LT).
expressed in milliseconds;
counter #13 of the ATM core;
this counter is only relevant for BBE1B and BBT1B
boards.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.28 |
adnAtmBoardErRFIFCCounterThe counter associated with the number of rate
reduction FIFO cell alignment failures;
counter #14 of the ATM core;
this counter is only relevant for BBE1B and BBT1B
boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.29 |
adnAtmBoardErBGETBCounterThe counter associated with the number of loss
of cell synchronization (BGETB);
counter #15 of the ATM core;
this counter is only relevant for BBE1B and BBT1B
boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.30 |
adnAtmBoardErBGMUXCounterThe counter associated with the number of received
start of cell errors from BGMUX;
counter #16 of the ATM core;
this counter is only relevant for BBE1B and BBT1B
boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.31 |
adnAtmBoardErHOBCounterThe counter associated with the duration of
overflows on high priority output buffer;
this counter is not relevant for HSC boards
without a high priority output buffer.
expressed in milliseconds;
counter #18 of the ATM core.rodeprecated Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.32 |
adnAtmBoardErMOBCounterThe counter associated with the duration of
overflows on medium priority output buffer;
this counter is not relevant for HSC boards
without a medium priority output buffer
(e.g. BBT1B and BBE1B);
expressed in milliseconds;
counter #19 of the ATM core.rodeprecated Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.33 |
adnAtmBoardErLOBCounterThe counter associated with the duration of
overflows on low priority output buffer;
this counter is not relevant for HSC boards
without a low priority output buffer;
expressed in milliseconds;
counter #20 of the ATM core.rodeprecated Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.21.1.34 |
adnAtmBoardErDRAMPCounterThe counter associated with the number of
processor DRAM parity errors;
counter #17 of the ATM core;
this counter is only relevant for a HBCEx board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.35 |
adnAtmBoardErRFIFFCounterThe counter associated with the number of Rate
reduction FIFO full events from ET to AAL1 component;
counter #31 of the ATM core;
this counter is only relevant for a HBCEx board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.36 |
adnAtmBoardCEMStatusThis variable indicates the processor status. It is a bit
map represented as a sum;
therefore it can represent multiple failures.
This variable is only significant for CEM8 boards.
The bit positions are :
1 : adnAtmBoardErUFOF user FIFO overflow
2 : adnAtmBoardErUFRF user FIFO read failure
4 : adnAtmBoardErNFOF network FIFO overflow
16 : adnAtmBoardErNFRF network FIFO read failure
512 : adnAtmBoardErLIRC0 loss of signal on IRC0
1024 : adnAtmBoardErLIRC1 loss of signal on IRC1
4096 : adnAtmBoardErAPPLIQ applique not present
131072 : adnAtmBoardErDRAMP processor DRAM parity error
2147483648: adnAtmBoardErRFIFF rate reduction FIFO full
from ET to AAL1 component
N.B.: This variable is significant when the operational
state of the port is enabled.
When there is no port error, this variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.21.1.37 |
adnAtmBoardErDCSECounterThe counter associated with the number of downwards
cell synchro errors;
counter #18 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.38 |
adnAtmBoardErDRFOVCounterThe counter associated with the number of downwards
receiving FIFO overflows;
counter #19 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.39 |
adnAtmBoardErDCMOVCounterThe counter associated with the number of downwards
cell memory overflows;
counter #21 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.40 |
adnAtmBoardErDCMMECounterThe counter associated with the number of downwards
cell memory management errors;
counter #22 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.41 |
adnAtmBoardErUCSECounterThe counter associated with the number of upwards
cell synchro errors;
counter #23 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.42 |
adnAtmBoardErURFOVCounterThe counter associated with the number of upwards
receiving FIFO overflows;
counter #24 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.43 |
adnAtmBoardErUCMOVCounterThe counter associated with the number of upwards
cell memory overflows;
counter #25 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.44 |
adnAtmBoardErUCMMECounterThe counter associated with the number of upwards
cell memory management errors;
counter #26 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.45 |
adnAtmBoardErRFORRF0CounterThe counter associated with the number of rate
reduction FIFO overflows on RRF0;
counter #32 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.46 |
adnAtmBoardErRFORRF1CounterThe counter associated with the number of rate
reduction FIFO overflows on RRF1;
counter #33 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.47 |
adnAtmBoardErRFORRF2CounterThe counter associated with the number of rate
reduction FIFO overflows on RRF2;
counter #34 of the ATM core;
this counter is only relevant for the BBTS1C boards
and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.21.1.48 |
adnAtmBoardTraCounterTableThis table is the ATM boards traffic counter
table.
The counter is classified according to the board
type.It is specific to the broadband ATM
switching element (BBASE) board also called the
matrix board. SEQUENCE OF AdnAtmBoardTraCounterEntry .1.3.6.1.4.1.637.3.1.5.15.22 |
adnAtmBoardTraCounterEntryAn entry in the ATM boards traffic counter table. AdnAtmBoardTraCounterEntry .1.3.6.1.4.1.637.3.1.5.15.22.1 |
adnAtmBoardTraHMP0ObsCounterThe counter associated with the number of cells
received since the observation threshold is
exceeded in the first HMP chip;
counter #0 of the ATM core;
this counter is only relevant for the matrix board
with a HMP release 2 chip.rodeprecated Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.22.1.1 |
adnAtmBoardTraHMP1ObsCounterThe counter associated with the number of cells
received since the observation threshold is
exceeded in the second HMP chip;
counter #1 of the ATM core;
this counter is only relevant for the matrix board
with a HMP release 2 chip.rodeprecated Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.22.1.2 |
adnAtmBoardTraFPTMICICounterThe counter associated with the number of free
outgoing point-to-multipoint (PTM) internal channel
identifiers (ICI);
counter #2 of the ATM core;
this counter is only relevant for the matrix board.ro Gauge .1.3.6.1.4.1.637.3.1.5.15.22.1.3 |
adnAtmBoardTraMOBSCDCounterThe counter associated with the number of Selective
Cell Discard (SCD) activations on medium priority
output buffer;
counter #33 of the ATM core;
this counter is only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.4 |
adnAtmBoardTraLOBSCDCounterThe counter associated with the number of Selective
Cell Discard (SCD) activations on low priority
output buffer;
counter #34 of the ATM core;
this counter is only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.5 |
adnAtmBoardTraMOBEFCICounterThe counter associated with the number of Explicit
Forward Congestion Indication (EFCI) activations
on medium priority output buffer;
counter #35 of the ATM core;
this counter is only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.6 |
adnAtmBoardTraLOBEFCICounterThe counter associated with the number of Explicit
Forward Congestion Indication (EFCI) activations
on low priority output buffer;
counter #36 of the ATM core;
this counter is only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.7 |
adnAtmBoardTraMOBTPDCounterThe counter associated with the number of Tail
Packet Discard (TPD) activations on medium
priority output buffer;
counter #37 of the ATM core;
this counter isis only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.8 |
adnAtmBoardTraLOBTPDCounterThe counter associated with the number of Tail
Packet Discard (TPD) activations on low priority
outpur buffer;
counter #38 of the ATM core;
this counter is only relevant for a HSC board
with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.9 |
adnAtmBoardTraHOBObsCounterThe counter associated with the number of
observation threshold exceedings on high
priority output buffer;
counter #39 of the ATM core;
this counter is only relevant for a HSC
board with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.10 |
adnAtmBoardTraMOBObsCounterThe counter associated with the number of
observation threshold exceedings on medium
priority output buffer;
counter #40 of the ATM core;
this counter is only relevant for a HSC
board with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.11 |
adnAtmBoardTraLOBObsCounterThe counter associated with the number of
observation threshold exceedings on low
priority output buffer;
counter #41 of the ATM core;
this counter is only relevant for a HSC
board with BGTOB chip.rodeprecated Counter .1.3.6.1.4.1.637.3.1.5.15.22.1.12 |
adnAeiPortErCounterTableThis table is the ATM electrical interface (AEI)
port error counter table.
Each counter corresponds to a defect number
identified by a bit set in the adnAeiPortEratus
of the adnAeiPortTable.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board. SEQUENCE OF AdnAeiPortErCounterEntry .1.3.6.1.4.1.637.3.1.5.15.23 |
adnAeiPortErCounterEntryAn entry in the ATM electrical interface (AEI) port
error counter table. AdnAeiPortErCounterEntry .1.3.6.1.4.1.637.3.1.5.15.23.1 |
adnAeiPortErOrWgStatusThis variable indicates the gravity of a port failure.
It is a bit map represented as a sum.
Each bit position maps to the corresponding position in
the nominator adnAeiPortASEStatus, adnAeiPortCIGStatus
or adnAeiPortHSCStatus (which defines the port's
failure status).
The adnAeiPortErOrWgStatus bit classifies the failure as
either an error (value '1') or a warning (value '0').
A bit value of '0' can also mean the failure
classification does not apply to the failure status.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.23.1.1 |
adnAeiPortASEStatusThis variable indicates the port status. It is a
bit map represented as a sum; therefore it can represent
multiple failures.
This variable is only significant for ASE boards.
The bit positions are :
1 : adnAeiPortOOS synchronization fault
ATM Electrical Interface
2 : adnAeiPortLOS synchronization fault
8 bit parallel Atm Internal Interface
4 : adnAeiPortNFOF network FIFO overflows
16 : adnAeiPortCECH corrected errors in cell
header
32 : adnAeiPortUCECH uncorrected errors in
cell header
256 : adnAeiPortNPE parity errors on payload
512 : adnAeiPortRTA routing data error status
4096 : adnAeiPortNMA1 no active maintenance
cell received
16384 : adnAeiPortEMA1 error active maintenance
cell received
67108864 : adnAeiPortNCRC CRC errors detected on
payload field
134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer)
sequence error in AEI reception
1073741824: adnAeiPortURC unrouted cells
N.B.: This variable is significant when the operational
state of the port is enabled.
When there is no port error, this variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.23.1.2 |
adnAeiPortCIGStatusThis variable indicates the port status. It is a
bit map represented as a sum; therefore it can represent
multiple failures.
This variable is only significant for CIG boards.
The bit positions are :
1 : adnAeiPortOOS out-of-synchronization
4 : adnAeiPortNFOF network FIFO overflows
8 : adnAeiPortIEMRAMP BGIEM chip RAM parity
errors
16 : adnAeiPortCECH corrected errors in cell
header
32 : adnAeiPortUCECH uncorrected errors in
cell header
64 : adnAeiPortCRCMA CRC errors on payload
field of MA1 (Active Maintenance type 1) cells
128 : adnAeiPortCRCSIC CRC errors on payload
field of SIC (Self Identified Cell) cells
256 : adnAeiPortNPE parity errors on payload
4096 : adnAeiPortNMA1 no active maintenance
cell received
16384 : adnAeiPortEMA1 active maintenance cell
received with error indication
131072 : adnAeiPortNSFOF network signalling FIFO
overflow
262144 : adnAeiPortNFWF network FIFO write failure
524288 : adnAeiPortSFWF signalling FIFO write
failure
1048576 : adnAeiPortNSFRF network signalling FIFO
read failure
4194304 : adnAeiPortUSFRF user signalling FIFO
read failure
8388608 : adnAeiPortUFWF user FIFO write failure
16777216 : adnAeiPortUSFOF user signalling FIFO
overflow
33554432 : adnAeiPortNICI cells received on
non-active ICI (Internal Communication
Interface)
67108864 : adnAeiPortNCRC CRC errors detected on
network side
134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer)
sequence error on network side
268435456 : adnAeiPortUCRC CRC errors detected on
user side
536870912 : adnAeiPortUAAL AAL sequence error on
user side
2147483648: adnAeiPortSFIFO load sharing FIFO overflow
N.B.: This variable is significant when the operational
state of the port is enabled.
When there is no port error, this variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.23.1.3 |
adnAeiPortHSCStatusThis variable indicates the port status. It is a
bit map represented as a sum; therefore it can represent
multiple failures.
This variable is only significant for HSC boards
(except CEM8 boards).
For HSC boards except BBTS1C and BBTP3C boards,
the bit positions are :
1 : adnAeiPortOOS out-of-synchronization
4 : adnAeiPortNFOF network FIFO overflows
8 : adnAeiPortIEMRAMP BGIEM chip RAM parity
errors
16 : adnAeiPortCECH corrected errors in cell
header
32 : adnAeiPortUCECH uncorrected errors in
cell header
64 : adnAeiPortCRCMA CRC errors on payload
field of MA1 (Active Maintenance type 1) cells
128 : adnAeiPortCRCSIC CRC errors on payload
field of SIC (Self Identified Cell) cells
256 : adnAeiPortNPE parity errors on payload
4096 : adnAeiPortNMA1 no active maintenance
cell received
16384 : adnAeiPortEMA1 active maintenance cell
received with error indication
131072 : adnAeiPortNSFOF network signalling FIFO
overflow
262144 : adnAeiPortNFWF network FIFO write failure
524288 : adnAeiPortSFWF signalling FIFO write
failure
1048576 : adnAeiPortNSFRF network signalling FIFO
read failure
4194304 : adnAeiPortUSFRF user signalling FIFO
read failure
8388608 : adnAeiPortUFWF user FIFO write failure
16777216 : adnAeiPortUSFOF user signalling FIFO
overflow
33554432 : adnAeiPortNICI cells received on
non-active ICI (Internal Communication
Interface)
67108864 : adnAeiPortNCRC CRC errors detected on
network side
134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer)
sequence error on network side
268435456 : adnAeiPortUCRC CRC errors detected on
user side
536870912 : adnAeiPortUAAL AAL sequence error on
user side
2147483648: adnAeiPortSFIFO load sharing FIFO overflow
For the BBTS1C and BBTP3C boards, the bit positions are :
1 : adnAeiPortOOS synchronization fault
ATM Electrical Interface
2 : adnAeiPortLOS synchronization fault
8 bit parallel Atm Internal Interface
4 : adnAeiPortNFOF network FIFO overflows
16 : adnAeiPortCECH corrected errors in cell
header
32 : adnAeiPortUCECH uncorrected errors in
cell header
256 : adnAeiPortNPE parity errors on payload
4096 : adnAeiPortNMA1 no active maintenance
cell received
16384 : adnAeiPortEMA1 error active maintenance
cell received
67108864 : adnAeiPortNCRC CRC errors detected on
payload field
134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer)
sequence error in AEI reception
N.B.: This variable is significant when the operational
state of the port is enabled.
When there is no port error, this variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.23.1.4 |
adnAeiPortErOOSCounterThe counter associated with the duration of
the out of synchronization.
expressed in milliseconds;
counter #0 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.23.1.5 |
adnAeiPortErNFOFCounterThe counter associated with the number of
network FIFO overflow intervals;
counter #2 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.6 |
adnAeiPortErCECHCounterThe counter associated with the number of
corrected errors in cell header;
counter #4 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.7 |
adnAeiPortErUCECHCounterThe counter associated with the number of
uncorrected errors in cell header;
counter #5 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.8 |
adnAeiPortErNPECounterThe counter associated with the number of parity
errors on payload field of cells;
counter #8 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.9 |
adnAeiPortErNMA1CounterThe counter associated with the number of lost
data maintenance cells;
counter #12 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.10 |
adnAeiPortErEMA1CounterThe counter associated with the number of data
maintenance cells received with error indication;
counter #14 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.11 |
adnAeiPortErNICICounterThe counter associated with the number of cells
received on non active internal channel identifier
(ICI);
counter #25 of the ATM core
this counter is not relevant for the HBCEx boards.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.23.1.12 |
adnAeiPortErNCRCCounterThe counter associated with the number of CRC
errors on network side;
counter #26 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.13 |
adnAeiPortErNAALCounterThe counter associated with the number of
ATM adaptation layer (AAL)
sequence errors on network side;
counter #27 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.14 |
adnAeiPortErLOSCounterThe counter associated with the loss of
synchronization intervals;
counter #1 of the ATM core;
this counter is only relevant for the matrix board,
for the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.15 |
adnAeiPortErRTAGCounterThe counter associated with the number of
unallowed routing tags;
counter #9 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.16 |
adnAeiPortErURCCounterThe counter associated with the number of unrouted
cells;
counter #30 of the ATM core;
this counter is only relevant for the matrix board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.23.1.17 |
adnAeiPortErIEMRAMPCounterThe counter associated with the number of BGIEM
chip RAM parity errors;
counter #3 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.18 |
adnAeiPortErCRCMA1CounterThe counter associated with the number of CRC
errors on payload field of maintenance active
cells of type 1 (MA1);
counter #6 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards, the BBTP3C boards and for the
HBCEx boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.19 |
adnAeiPortErCRCSICCounterThe counter associated with the number of CRC
errors on payload field of self identified cells
(SIC);
counter #7 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards, the BBTP3C boards and for the
HBCEx boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.20 |
adnAeiPortErNSFOFCounterThe counter associated with the number of
network signalling FIFO overflows;
counter #17 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.21 |
adnAeiPortErNFWFCounterThe counter associated with the number of network
FIFO write failures;
counter #18 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.22 |
adnAeiPortErSFWFCounterThe counter associated with the number of
signalling FIFO write failures;
counter #19 of the ATM core;
this counter is not relevant for the matrix board.,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.23 |
adnAeiPortErNSFRFCounterThe counter associated with the number of
network signalling FIFO read failures;
counter #20 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.24 |
adnAeiPortErUSFRFCounterThe counter associated with the number of
user signalling FIFO read failures;
counter #22 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.25 |
adnAeiPortErUFWFCounterThe counter associated with the number of user
FIFO write failures;
counter #23 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.26 |
adnAeiPortErUSFOFCounterThe counter associated with the number of
user signalling FIFO overflows;
counter #24 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.27 |
adnAeiPortErUCRCCounterThe counter associated with the number of CRC
errors ion user side;
counter #28 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards, the BBTP3C boards and for the
HBCEx boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.28 |
adnAeiPortErUAALCounterThe counter associated with the number of
ATM adaptation layer (AAL)
sequence errors on user side;
counter #29 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards, the BBTP3C boards and for the
HBCEx boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.29 |
adnAeiPortErSFIFOCounterThe counter associated with the number of load
sharing FIFO overflows;
counter #31 of the ATM core;
this counter is not relevant for the matrix board,
the BBTS1C boards and for the BBTP3C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.23.1.30 |
adnAeiPortCEMStatusThis variable indicates the port status. It is a
bit map represented as a sum; therefore it can represent
multiple failures.
This variable is only significant for CEM8 boards.
The bit positions are :
1 : adnAeiPortOOS out-of-synchronization
4 : adnAeiPortNFOF network FIFO overflows
8 : adnAeiPortIEMRAMP BGIEM chip RAM parity
errors
16 : adnAeiPortCECH corrected errors in cell
header
32 : adnAeiPortUCECH uncorrected errors in
cell header
256 : adnAeiPortNPE parity errors on payload
4096 : adnAeiPortNMA1 no active maintenance
cell received
16384 : adnAeiPortEMA1 active maintenance cell
received with error indication
131072 : adnAeiPortNSFOF network signalling FIFO
overflow
262144 : adnAeiPortNFWF network FIFO write failure
524288 : adnAeiPortSFWF signalling FIFO write
failure
1048576 : adnAeiPortNSFRF network signalling FIFO
read failure
4194304 : adnAeiPortUSFRF user signalling FIFO
read failure
8388608 : adnAeiPortUFWF user FIFO write failure
16777216 : adnAeiPortUSFOF user signalling FIFO
overflow
67108864 : adnAeiPortNCRC CRC errors detected on
network side
134217728 : adnAeiPortNAAL AAL (ATM Adaptation Layer)
sequence error on network side
2147483648: adnAeiPortSFIFO load sharing FIFO overflow
N.B.: This variable is significant when the operational
state of the port is enabled.
When there is no port error, this variable has the value 0.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.23.1.31 |
adnAeiPortTraCounterTableThis table is the ATM electrical interface (AEI) port
traffic counters table.
The counters are classified according to the board
type. Some are specific to the broadband ATM
switching element (BBASE) board also called the
matrix board. SEQUENCE OF AdnAeiPortTraCounterEntry .1.3.6.1.4.1.637.3.1.5.15.24 |
adnAeiPortTraCounterEntryAn entry in the ATM electrical interface (AEI) port
traffic counters table. AdnAeiPortTraCounterEntry .1.3.6.1.4.1.637.3.1.5.15.24.1 |
adnAeiPortTraPTPSetRqCounterThe counter associated with the number of
point-to-point (PTP) setup requests;
counter #1 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.1 |
adnAeiPortTraPTMSetRqCounterThe counter associated with the number of
point-to-multipoint (PTM) setup requests;
counter #2 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.2 |
adnAeiPortTraPTPSetRjBCounterThe counter associated with the number of
point-to-point (PTP)
setup rejects due to blocking;
counter #3 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.3 |
adnAeiPortTraPTMSetRjBCounterThe counter associated with the number of
point-to-multipoint (PTM)
setup rejects due to blocking;
counter #4 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.4 |
adnAeiPortTraPTPSetRjCCounterThe counter associated with the number of
point-to-point (PTP)
setup rejects due to communication;
counter #5 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.5 |
adnAeiPortTraPTMSetRjCCounterThe counter associated with the number of
point-to-multipoint (PTM)
setup rejects due to communication;
counter #6 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.6 |
adnAeiPortTraPTPSetTrCounterThe counter associated with the number of
point-to-point (PTP) setup trials;
counter #7 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.7 |
adnAeiPortTraPTMSetTrCounterThe counter associated with the number of
point-to-multipoint (PTM) setup trials;
counter #8 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.8 |
adnAeiPortTraPTPCnxCounterThe counter associated with the number of
point-to-point (PTP) connections in progress;
counter #13 of the ATM core;
this counter is not relevant for the matrix board.ro Gauge .1.3.6.1.4.1.637.3.1.5.15.24.1.9 |
adnAeiPortTraPTMCnxCounterThe counter associated with the number of
point-to-multipoint (PTM) connections in progress;
counter #14 of the ATM core;
this counter is not relevant for the matrix board.ro Gauge .1.3.6.1.4.1.637.3.1.5.15.24.1.10 |
adnAeiPortTraEFCCCounterThe counter associated with the number of established
forward connection component;
counter #17 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.11 |
adnAeiPortTraPTPBWICIRqCounterThe counter associated with the number of
point-to-point (PTP) bandwith or internal
channel identifier (BW,ICI) requests;
counter #4 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.12 |
adnAeiPortTraPTMBWICIRqCounterThe counter associated with the number of
point-to-multipoint (PTM) bandwith or internal
channel identifier (BW,ICI) requests;
counter #5 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.13 |
adnAeiPortTraPTPBWRjCounterThe counter associated with the number of
point-to-point (PTP) bandwith (BW) requests failure;
counter #6 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.14 |
adnAeiPortTraPTMBWRjCounterThe counter associated with the number of
point-to-multipoint (PTM) bandwith (BW)
requests failure;
counter #7 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.15 |
adnAeiPortTraPTPICIRjCounterThe counter associated with the number of
point-to-point (PTP) internal channel identifier
(ICI) requests failure;
counter #8 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.16 |
adnAeiPortTraPTMICIRjCounterThe counter associated with the number of
point-to-multipoint (PTM) internal channel identifier
(ICI) requests failure;
counter #9 of the ATM core;
this counter is only relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.17 |
adnAeiPortTraPeakBWCounterThe counter associated with the reserved peak
bandwith (BW);
counter #10 of the ATM core;
this counter is only relevant for the matrix board.ro Gauge .1.3.6.1.4.1.637.3.1.5.15.24.1.18 |
adnAeiPortTraFPTPICICounterThe counter associated with the number of free
point-to-point (PTP) internal channel identifiers
(ICI);
counter #12 of the ATM core;
this counter is only relevant for the matrix board.ro Gauge .1.3.6.1.4.1.637.3.1.5.15.24.1.19 |
adnAeiPortTraMPriorBWCounterThe counter associated with the reserved mean
priority bandwith (BW);
Counter #14 of the ATM core;
this counter is only relevant for the matrix board.roobsolete Gauge .1.3.6.1.4.1.637.3.1.5.15.24.1.20 |
adnAeiPortTraInCellsCounterThe counter associated with the number of incoming
cells;
counter #15 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.21 |
adnAeiPortTraOutCellsCounterThe counter associated with the number of outgoing
cells;
counter #16 of the ATM core.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.22 |
adnAeiPortTraEBCCCounterThe counter associated with the number of established
backward connection component;
counter #18 of the ATM core;
this counter is not relevant for the matrix board.ro Counter .1.3.6.1.4.1.637.3.1.5.15.24.1.23 |
adnHscBoardTrMgtTableThis table is the HSC Board Traffic Management
parameters table.
This is only relevant for HSC boards with
output buffers SEQUENCE OF AdnHscBoardTrMgtEntry .1.3.6.1.4.1.637.3.1.5.15.25 |
adnHscBoardTrMgtEntryAn entry in the ATM Traffic Management parameters
table. AdnHscBoardTrMgtEntry .1.3.6.1.4.1.637.3.1.5.15.25.1 |
adnHscBoardTrMgtOBLineAssigThis indicates the line number the output
buffer is assigned to.ro INTEGER .1.3.6.1.4.1.637.3.1.5.15.25.1.1 |
adnHscBoardTrMgtHOBSizeThis indicates the size of high priority
output buffer;
the allowed values are :
- 115(cells) for BBT1B and BBE1B boards
- 1..256(cells) for other HSC boards
with output buffers.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.2 |
adnHscBoardTrMgtMOBSizeThis indicates the size of medium priority
output buffer;
For BBTS1C boards :
the value range of the size is 0..7255 (cells);
For BBTP3C boards :
the value range of the size is 0..3627 (cells);
For the other HSC boards with output buffers :
the value range of the size is 0..16383(cells);
this is not relevant for HSC boards without a
medium priority output buffer (e.g. BBT1B and
BBE1B).ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.3 |
adnHscBoardTrMgtLOBSizeThis indicates the size of low priority output
buffer;
For BBE1B and BBT1B boards :
the allowed value is 2537(cells).
For BBTS1C boards :
adnHscBoardTrMgtLOBSize = 7256 -
adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize.
For BBTP3C boards :
adnHscBoardTrMgtLOBSize = 3628 -
adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize.
For the other HSC boards with output buffers :
adnHscBoardTrMgtLOBSize = 16384 -
adnHscBoardTrMgtHOBSize - adnHscBoardTrMgtMOBSize.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.4 |
adnHscBoardTrMgtHOBSCDThThis indicates the Selective Cell Discard (SCD)
threshold in high priority output buffer (OB);
when the filling of the high priority OB
reaches the threshold, any incoming cell which
internal cell loss priority equal to 1 will be
discarded;
due to BGTOB chip constraint, the value of the
threshold is the high priority OB size.
(adnHscBoardTrMgtHOBSize).ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.5 |
adnHscBoardTrMgtMOBSCDThThis indicates the Selective Cell Discard (SCD)
threshold in medium priority output buffer (OB);
when the filling of the medium priority OB
reaches the threshold, any incoming cell which
internal cell loss priority equal to 1 will be
discarded;
the value range of the threshold is
0..adnHscBoardTrMgtMOBSize(cells);
this is not relevant for HSC boards without a
medium priority output buffer (e.g. BBT1B and
BBE1B).ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.6 |
adnHscBoardTrMgtLOBSCDThThis indicates the Selective Cell Discard (SCD)
threshold in low priority output buffer (OB).
when the filling of the low priority OB
reaches the threshold, any incoming cell
which internal cell loss priority is equal
to 1 will be discarded;
the value range of the threshold is
0..adnHscBoardTrMgtLOBSize(cells);
For BBE1B and BBT1B boards :
the value is multiple of 256.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.7 |
adnHscBoardTrMgtHOBEFCIOnThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in high
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold;
due to BGTOB chip constraint, the value of the
threshold is adnHscBoardTrMgtHOBSize (cells);
this is only relevant for HSC board with a
high priority output buffer.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.8 |
adnHscBoardTrMgtMOBEFCIOnThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in medium
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold; the EFCI desactivation
threshold is equal to the activation threshold
minus 1/10 of the activation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtMOBSize;
this is not relevant for HSC boards without a
medium priority output buffer (e.g. BBT1B and
BBE1B)..rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.9 |
adnHscBoardTrMgtLOBEFCIOnThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in low
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold; the EFCI desactivation
threshold is equal to the activation threshold
minus 1/10 of the activation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtLOBSize;
this is only relevant for HSC board with a
low priority output buffer.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.10 |
adnHscBoardTrMgtHOBEFCIOffThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in high
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold;
due to BGTOB chip constraint, the value of the
threshold is adnHscBoardTrMgtHOBSize (cells);
this is only relevant for HSC board with a
high priority output buffer.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.11 |
adnHscBoardTrMgtMOBEFCIOffThThis indicates the Explicit Forward Congestion
Indication (EFCI) activation threshold in medium
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold; the EFCI desactivation
threshold is equal to the activation threshold
minus 1/10 of the activation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtMOBSize;
this is not relevant for HSC boards without a
medium priority output buffer (e.g. BBT1B and
BBE1B).ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.12 |
adnHscBoardTrMgtLOBEFCIOffThThis indicates the Explicit Forward Congestion
Indication (EFCI) desactivation threshold in low
priority output buffer (OB);
EFCI is generated towards the receiver termination
point, in order to prevent congestion situation to
be encountered within the output buffer;
EFCI tagging is activated as soon as the activation
threshold is reached; EFCI tagging is stopped as
soon as the filling of the OB is below the EFCI
desactivation threshold; the EFCI desactivation
threshold is equal to the activation threshold
minus 1/10 of the activation threshold;
the value range of the threshold is
0..adnHscBoardTrMgtLOBSize;
this is only relevant for HSC board with a
low priority output buffer.ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.13 |
adnHscBoardTrMgtHOBObsThThis indicates the observation threshold in high
priority output buffer;
when the observation threshold is overpassed,
the adnHscBoardTrMgtHOBObsCounter value increases;
the value range of the threshold is
0..(adnHscBoardTrMgtHOBSize - 1)(cells);
this is not relevant for BBT1B and BBE1B boards.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.14 |
adnHscBoardTrMgtMOBObsThThis indicates the observation threshold in
medium priority output buffer;
when the observation threshold is overpassed,
the adnHscBoardTrMgtMOBObsCounter value increases;
the value range of the threshold is
0..(adnHscBoardTrMgtMOBSize - 1) (cells);
this is not relevant for HSC boards without a
medium priority output buffer (e.g. BBT1B and
BBE1B)..rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.15 |
adnHscBoardTrMgtLOBObsThThis indicates the observation threshold in low
priority output buffer;
when the observation threshold is overpassed,
the adnHscBoardTrMgtLOBObsCounter value increases;
the value range of the threshold is
0..(adnHscBoardTrMgtLOBSize - 1) (cells);
this is not relevant for BBT1B and BBE1B boards.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.25.1.16 |
adnHscBoardTrMgtOBStatusThis variable indicates the output
buffers overflows status.
It is a bit map represented as a sum.
The bit positions are :
1 : high priority output buffer overflow
2 : medium priority output buffer overflow
4 : low priority output buffer overflow
N.B.1:When there is no overflow within an output
buffer, the corresponding bit has the value '0'.
N.B.2:For BBE1B and BBT1B boards, bit position 2 is
not significant.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.25.1.17 |
adnHscBoardTrMgtHOBCounterThe counter associated with the duration of
overflows on high priority output buffer;
this counter is not relevant for HSC boards
without a high priority output buffer.
expressed in milliseconds;
counter #26 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.25.1.18 |
adnHscBoardTrMgtMOBCounterThe counter associated with the duration of
overflows on medium priority output buffer;
this counter is not relevant for HSC boards
without a medium priority output buffer
(e.g. BBT1B and BBE1B);
expressed in milliseconds;
counter #25 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.25.1.19 |
adnHscBoardTrMgtLOBCounterThe counter associated with the duration of
overflows on low priority output buffer;
this counter is not relevant for HSC boards
without a low priority output buffer;
expressed in milliseconds;
counter #19 of the ATM core.ro Counter -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.15.25.1.20 |
adnHscBoardTrMgtMOBSCDCounterThe counter associated with the number of
Selective Cell Discard(SCD) activations on
medium priority output buffer;
this counter is not relevant for HSC boards
without a medium priority output buffer
(e.g. BBT1B and BBE1B).ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.21 |
adnHscBoardTrMgtLOBSCDCounterThe counter associated with the number of Selective
Cell Discard (SCD) activations on low priority
output buffer;
this counter is not relevant for HSC boards
without a low priority output buffer.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.22 |
adnHscBoardTrMgtMOBEFCICounterThe counter associated with the number of Explicit
Forward Congestion Indication (EFCI) activations
on medium priority output buffer;
counter #2 of the ATM core;
this counter is not relevant for HSC boards
without a medium priority output buffer
(e.g. BBT1B and BBE1B).ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.23 |
adnHscBoardTrMgtLOBEFCICounterThe counter associated with the number of Explicit
Forward Congestion Indication (EFCI) activations
on low priority output buffer;
counter #3 of the ATM core;
this counter is not relevant for HSC boards
without a low priority output buffer and for
BBE1B and BBT1B boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.24 |
adnHscBoardTrMgtMOBTPDCounterThe counter associated with the number of Tail
Packet Discard (TPD) activations on medium
priority output buffer;
counter #4 of the ATM core;
this counter is not relevant for HSC boards
without a medium priority output buffer
(e.g. BBT1B and BBE1B), the BBTP3C
boards and for the BBTS1C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.25 |
adnHscBoardTrMgtLOBTPDCounterThe counter associated with the number of Tail
Packet Discard (TPD) activations on low priority
outpur buffer;
counter #5 of the ATM core;
this counter is not relevant for HSC boards
without a low priority output buffer, for
the BBE1B boards, the BBT1B boards, the BBTP3C
boards and for the BBTS1C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.26 |
adnHscBoardTrMgtHOBObsCounterThe counter associated with the number of
observation threshold overpassings on high
priority output buffer;
this counter is not relevant for HSC boards
without a high priority output buffer, for
the BBE1B, the BBT1B boards, the BBTP3C
boards and for the BBTS1C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.27 |
adnHscBoardTrMgtMOBObsCounterThe counter associated with the number of
observation threshold overpassings on medium
priority output buffer;
this counter is not relevant for HSC boards
board without a medium priority output buffer
(e.g. BBT1B and BBE1B) and the BBTP3C boards
and for the BBTS1C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.28 |
adnHscBoardTrMgtLOBObsCounterThe counter associated with the number of
observation threshold overpassings on low
priority output buffer;
this counter is not relevant for HSC boards
without a low priority output buffer, the
BBE1B, the BBT1B boards, the BBTP3C boards
and for the BBTS1C boards.ro Counter .1.3.6.1.4.1.637.3.1.5.15.25.1.29 |
adnAseBoardTrMgtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.15.26 |
adnAseBoardTrMgtSCDThThis indicates the Selective Cell Discard (SCD)
threshold;
when the filling of the FIFO reaches the
threshold, any incoming low priority cell
will be discarded;
the value range of this threshold is 0..255(cells);
this is relevant only for the BBASEB matrix board.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.1 |
adnAseBoardTrMgtHMP0ObsThThis indicates the first observation threshold;
when the observation threshold is exceeded, the
adnAseBoardTrMgtObs1Counter increases each time a
cell is received;
the value range of this threshold is 0..255(cells);
this is relevant only for the matrix board.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.2 |
adnAseBoardTrMgtHMP1ObsThThis indicates the second observation threshold;
when the observation threshold is exceeded, the
adnAseBoardTrMgtObs2Counter increases each time a
cell is received;
the value range of this threshold is 0..255(cells);
this is relevant only for the matrix board.rw INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.3 |
adnAseBoardTrMgtOBStatusThis variable indicates if cells are
discarded because of FIFO overflow or
Selective Cell Discard (SCD).
It is a bit map represented as a sum.
The bit positions are :
1 : Selective Cell Discard activated
2 : FIFO overflow
N.B.:When there is neither overflow nor SCD
activation, the corresponding bit has the value '0'.
this is relevant only for the BBASEB matrix board.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.15.26.4 |
adnAseBoardTrMgtKThis indicates the Connection Admission Control
(CAC) overbooking factor for all AEI ports,
expressed as a percentage;
the value range of this percentage is 100..1000;
this is relevant only for the matrix board.rw INTEGER -- UNITS percentage .1.3.6.1.4.1.637.3.1.5.15.26.5 |
adnAseBoardTrMgtKUbrThis indicates the overbooking factor allowed for
Unspecified Bit Rate (UBR) connections;
the percentage is used to calculate the allocated
bandwidth of UBR connections;
this is relevant only for the BBASEB matrix board.rw AdnPercent .1.3.6.1.4.1.637.3.1.5.15.26.6 |
adnAseBoardTrMgtIFRThis indicates the Interface Filling Rate (IFR)
for all AEI ports;
this is relevant only for the matrix board.rw AdnPercent .1.3.6.1.4.1.637.3.1.5.15.26.7 |
adnAseBoardTrMgtSCDCounterThe counter associated with the number of
low priority cells lost due to Selective
Cell Discard (SCD);
counter #26 of the ATM core;
this counter is only relevant for the BBASEB
matrix board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.8 |
adnAseBoardTrMgtOVFLCounterThe counter associated with the number of high
priority cells lost due to buffer overflow;
counter #27 of the ATM core;
this counter is only relevant for the BBASEB
matrix board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.9 |
adnAseBoardTrMgtObs1CounterThe counter associated with the number of cells
received since the first observation threshold is
exceeded;
counter #0 of the ATM core;
this counter is only relevant for the matrix board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.10 |
adnAseBoardTrMgtObs2CounterThe counter associated with the number of cells
received since the second observation threshold
is exceeded;
counter #1 of the ATM core;
this counter is only relevant for the matrix board.ro Counter -- UNITS cells .1.3.6.1.4.1.637.3.1.5.15.26.11 |
adnPhysical OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.16 |
adnPhyTableA list of physical or channel-level interface entries. SEQUENCE OF AdnPhyEntry .1.3.6.1.4.1.637.3.1.5.16.1 |
adnPhyEntryAn interface entry containing objects for physical
and channel-level interfaces. AdnPhyEntry .1.3.6.1.4.1.637.3.1.5.16.1.1 |
adnPhyChassisThe number of the chassis that supports this ifIndex.
Common Name: Chassisro INTEGER .1.3.6.1.4.1.637.3.1.5.16.1.1.1 |
adnPhySlotThe number of the slot that supports this ifIndex.
Common Name: Cardro INTEGER .1.3.6.1.4.1.637.3.1.5.16.1.1.2 |
adnPhyLineThe number of the line that supports this ifIndex.
Common Name: Linero INTEGER .1.3.6.1.4.1.637.3.1.5.16.1.1.3 |
adnPhyChannelThe number of the channel that supports this ifIndex.
Line-level interfaces have a channel value of zero.
Common Name: Channelro INTEGER .1.3.6.1.4.1.637.3.1.5.16.1.1.4 |
adnFRAIWMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.17 |
adnFRAIWConfTableThis table contains the configuration parameters
of the frame relay (FR) logical line. There is
one entry for each FR logical line. SEQUENCE OF AdnFRAIWConfEntry .1.3.6.1.4.1.637.3.1.5.17.1 |
adnFRAIWConfEntryAn entry in the adnFRAIWConfTable. There is
one entry for each frame relay logical line. AdnFRAIWConfEntry .1.3.6.1.4.1.637.3.1.5.17.1.1 |
adnFRAIWConfIUNIifIndexThe ifIndex of the internal user to network
interface (I-UNI) bearing the ATM virtual
channel connection (VCC) associated with this
frame relay logical line.
Common Name: I-UNI ifIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.17.1.1.1 |
adnFRAIWConfVpiThe virtual path identifier (VPI) of the ATM
virtual channel connection (VCC) bearing the
frame relay logical line.
Common Name: Virtual Path Identifier, VPIro INTEGER .1.3.6.1.4.1.637.3.1.5.17.1.1.2 |
adnFRAIWConfVciThe virtual connection identifier (VCI) of the
ATM virtual channel connection (VCC) bearing the
frame relay logical line.
Common name: Virtual Channel Identifier, VCIro INTEGER .1.3.6.1.4.1.637.3.1.5.17.1.1.3 |
adnFRAIWConfLogLineTypeThe type of service using the frame relay logical
line:
- franpOverATM : FRANP trunking over ATM
- netIWsc1 : network interworking scenario 1
(defined by FRF.5)
- netIWsc2OneToOne : network interworking scenario 2
with each FR connection mapped
to a single ATM virtual channel
connection (defined by FRF.5)
- netIWsc2ManyToOne: network interworking scenario 2
with multiple FR connections
multiplexed into a single ATM
virtual channel connection
(defined by FRF.5)
- serIW : service interworking (defined by
FRF.8)
- issc : NMS-ISS connection over ATM
- ipfw : IP Forwarding service
Common Name: Logical Line Typero Enumeration .1.3.6.1.4.1.637.3.1.5.17.1.1.4 |
adnFRAIWConfAalTypeThe type of ATM Adaptation Layer used on the ATM
virtual channel connection (VCC) bearing the
frame relay logical line.
Common Name: ATM Adaptation Layerro Enumeration .1.3.6.1.4.1.637.3.1.5.17.1.1.5 |
adnFRAIWConfInitCLPThe segmentation process of every frame for the
frame relay logical line generates ATM cells.
This variable defines how the cell loss priority
(CLP) bit for each of those cells is initialized.
The names of the valid values are borrowed from
the Frame Relay Forum implementation agreements
concerning FR/ATM interworking (FRF.5 and FRF.8):
- mode1 : The discard eligibility bit in the Q.922
core frame is copied to the CLP bit.
- mode20 : Every ATM cell's CLP bit is set to zero.
This mode is the only one allowed if the
FR logical line is bearing a FRANP trunk or
an ISS connection.
- mode21 : Every ATM cell's CLP bit is set to one.
This mode is the only one allowed if the
FR logical line is bearing an IP forwarding
connection.
Common Name: Cell Loss Priority Bitro Enumeration .1.3.6.1.4.1.637.3.1.5.17.1.1.6 |
adnFRAIWConfTrapEnableThis indicates if trap generation is enabled on
the frame relay logical line in case of reception
of an over-sized AAL Service Data Unit.
Common Name: Traprw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.17.1.1.7 |
adnFRAIWConfStatisticsEnableThis indicates if historical statistics generation
is enabled on the frame relay logical line.
Common Name: Statisticsrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.17.1.1.8 |
adnFRAIWConfSegmPcrThe Peak Cell Rate (PCR) of the ATM flow generated on the
logical line by the segmentation process of frames.
Common name: Segmentation Peak Cell Rate (PCR)ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.17.1.1.9 |
adnFRAIWConfSegmScrThe Sustainable Cell Rate (SCR) of the ATM flow generated on the
logical line by the segmentation process of frames when the
segmentation process generates a variable bit rate flow.
When the segmentation process generates a constant bit rate flow,
the segmentation SCR is set to 0.
Common name: Segmentation Sustainable Cell Rate (SCR)ro INTEGER -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.17.1.1.10 |
adnFRAIWConfSegmMbsThe maximum number of cells transmitted at the Peak Cell Rate
(PCR) in the ATM flow generated on the logical line when the
segmentation process generates a variable bit rate flow.
When the segmentation process generates a constant bit rate flow,
the segmentation maximum burst size is set to 0.
Common name: Segmentation Maximum Burst Size (MBS)ro INTEGER -- UNITS cells .1.3.6.1.4.1.637.3.1.5.17.1.1.11 |
adnFRAIWConfCosRtOutOctetsNumber of Class 1 Octets transmitted by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.12 |
adnFRAIWConfCosRtOutPktsNumber of Class 1 packets (frame or subframes) transmitted
by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.13 |
adnFRAIWConfCosRtOutErrorsNumber of errors while transmitting Class 1 data by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.14 |
adnFRAIWConfCosNrtOutOctetsNumber of Class 2 Octets transmitted by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.15 |
adnFRAIWConfCosNrtOutPktsNumber of Class 2 packets (frame or subframes) transmitted
by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.16 |
adnFRAIWConfCosNrtOutErrorsNumber of errors while transmitting Class 2 data by aafd.ro Counter .1.3.6.1.4.1.637.3.1.5.17.1.1.17 |
adnFrAtmSerIWTableThis table contains the parameters
of the frame relay (FR) logical line. There is
one entry for each FR logical line bearing service
interworking. SEQUENCE OF AdnFrAtmSerIWEntry .1.3.6.1.4.1.637.3.1.5.17.2 |
adnFrAtmSerIWEntryAn entry in the adnFrAtmSerIWTable. There is
one entry for each frame relay logical line
bearing service interworking. AdnFrAtmSerIWEntry .1.3.6.1.4.1.637.3.1.5.17.2.1 |
adnFrAtmSerIWInitEFCIThe segmentation process of every frame for the
frame relay logical line generates ATM cells.
This variable defines how the explicit forward
congestion indication (EFCI) bit for each of
those cells is initialized.
The names of the valid values are borrowed from
the Frame Relay Forum implementation agreement
concerning FR/ATM service interworking (FRF.8):
- mode1 : The FECN bit in the Q.922 core frame is
copied to the EFCI bit.
- mode2 : Every ATM cell's EFCI bit is set to zero.
Common Name: Explicit Forward Congestion Indication
Bitro Enumeration .1.3.6.1.4.1.637.3.1.5.17.2.1.1 |
adnFrAtmSerIWInitDEThis variable defines how the discard eligibility
(DE) bit for each frame reassembled from cells
is initialized on a FR logical line used for service
interworking.
The names of the valid values are borrowed from
the Frame Relay Forum implementation agreement
concerning FR/ATM service interworking (FRF.8):
- mode20 : The DE bit is set to zero.
- mode21 : The DE bit is set to one.
Common Name: Discard Eligibility Bitro Enumeration .1.3.6.1.4.1.637.3.1.5.17.2.1.2 |
adnFrAtmSerIWEncapsModeThe way to handle the upper layer user protocol
encapsulation on the frame relay logical line:
- transparent : the encapsulations are forwarded unaltered.
No fragmentation/reassembly is performed.
- translation : The mapping between RFC1490 and RFC1483
is performed.
No fragmentation/reassembly is performed.
Common Name: Encapsulation Modero Enumeration .1.3.6.1.4.1.637.3.1.5.17.2.1.3 |
adnFrAtmSerIWAddrDLCIThe value of this object identifies the DLCI used for this
FR logical line when forwarding a frame to the FR layer.
The value of this object is always equal to 16.
This value is used when configuring the FR PVC of the
FR access on top of this logical line.
Common Name: DLCIro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.4 |
adnFrAtmSerIWUserN391The value of this object identifies the User-side
N391 full status polling cycle value for this
logical port.
Common Name: userN391ro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.5 |
adnFrAtmSerIWUserN392The value of this object identifies the User-side
N392 error threshold value for this
logical port.
Common Name: userN392ro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.6 |
adnFrAtmSerIWUserN393The value of this object identifies the User-side
N393 monitored events count value for this
logical port.
Common Name: userN393ro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.7 |
adnFrAtmSerIWUserT391The value of this object identifies the User-side
T391 link integrity verification polling timer
value for this logical port.
Common Name: userT391ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.17.2.1.8 |
adnFrAtmSerIWNetN392The value of this object identifies the Network-
side N392 error threshold value for
this logical port.
Common Name: NetN392ro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.9 |
adnFrAtmSerIWNetN393The value of this object identifies the Network-
side N393 monitored events count value for this
logical port.
Common Name: NetN393ro INTEGER .1.3.6.1.4.1.637.3.1.5.17.2.1.10 |
adnFrAtmSerIWNetT392The value of this object identifies the Network-
side T392 polling verification timer value for this
logical port.
Common Name: NetT392ro INTEGER -- UNITS seconds .1.3.6.1.4.1.637.3.1.5.17.2.1.11 |
adnPmdMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.18 |
adnPmdNodeTableThe objects in this table define the status of the post
mortem dump (PMD) at the node level. The NMS can set or get
the PMD status at the node level. The node level is the
highest one in the hierarchy.
If the PMD is disabled at the node level, it is also
disabled at the board and processor levels. If it is
enabled at the node level, it may be enabled or disabled at
the lower (board and processor) levels.
PMD is disable means that no PMD is generated.
If the PMD filter is disabled at the node level, it is also
disabled at the board and processor levels. If it is
enabled at the node level, it may be enabled or disabled at
the lower (board and processor) levels.
PMD filter is disable means that no filter is applicated for
each generated PMD. At each PMD a file is created.
If the kind of PMD is 'free' at the node level, the kind of
PMD generated is determined by the value at the board level.
If it is not 'free', the generated PMD is the most complete
kind of those indicated at the node, board and processor
levels. The kind of PMD order is as follows (from least to
most complete):
. min -> short -> long -> full. SEQUENCE OF AdnPmdNodeEntry .1.3.6.1.4.1.637.3.1.5.18.1 |
adnPmdNodeEntryAn entry in the node table. AdnPmdNodeEntry .1.3.6.1.4.1.637.3.1.5.18.1.1 |
adnPmdNodeEnableDisableThis variable defines whether or not the post mortem dump
(PMD) is enabled at the node level.
The NMS can activate or deactivate the PMD using this
variable.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.1.1.1 |
adnPmdNodeKindOfPmdThis defines the type of post mortem dump (PMD) to execute.
This variable applies at the node level.
min : post mortem dump will be minimum (only the failure
~~~ context is provided) at the board and processor
. levels, unless the values of adnPmdBoardKindOfPmd
. and adnPmdProcessorKindOfPmd are short, long or
. full.
. In this case, the more complete PMD is chosen.
short : post mortem dump will be short at the board and
~~~~~ processor levels, unless the values of
. adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd
. are long or full.
. In this case, the more complete PMD is chosen.
. Short means only the memory areas belonging to the
. faulty application and explicitly declared for the
. post mortem dump are extracted from the target
. memory.
long : post mortem dump will be long at the board and
~~~~ processor levels, unless the values of
. adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd
. is full.
. In this case, the full PMD is chosen.
. Long means all the memory areas explicitly declared
. by the applications for the post mortem dump are
. extracted from the target memory.
full : post mortem dump will be full (entire memory)
~~~~ at the board and processor levels, no matter what
. the values are for adnPmdBoardKindOfPmd and
. adnPmdProcessorKindOfPmd, no matter what the memory
. areas declared by the applications are.
free : the post mortem dump will be processed at the board
~~~~ and processor levels according to the values of the
. adnPmdBoardKindOfPmd and adnPmdProcessorKindOfPmd
. objects.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.1.1.2 |
adnPmdNodeSurveillanceThis defines whether or not the NMS will get the post
mortem dump (PMD) files from the node's to_nms transfer
directory.
If the node is under surveillance (enable) the NMS won't
get the PMD files from the to_nms transfer directory
but the PMD files continues to be created in this
directory.
This causes no modification of the PMD mechanism behavior.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.1.1.3 |
adnPmdNodeFilterStatusThis variable defines whether or not the post mortem dump
(PMD) filter is enabled at the node level.
The NMS can activate, deactivate or reset the PMD filter
using this variable.
After the reset action, the variable takes back its previous
value at node level (either enable or disable).
The node level is the highest one in the hierarchy.
If the PMD filter is disabled at the node level, it is also
disabled at the board and processor levels. If it is
enabled at the node level, it is enabled or disabled at
board level according to the status at this level.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.1.1.4 |
adnPmdBoardTableThe objects in this table define the status of the post
mortem dump (PMD) at the board level. The NMS can set or get
the PMD status at the board level.
If the PMD is disabled at the board level, it is also
disabled at the processor level. If it is enabled at the
board level, it may be enabled or disabled at the lower
(processor) level.
PMD is disable means that no PMD is generated.
If the PMD filter is disabled at the board level, it is also
disabled at the processor level. If it is enabled at the
board level, it may be enabled or disabled at the lower
(processor) level.
PMD filter is disable means that no filter is applicated for
each generated PMD. At each PMD a file is created.
If the kind of PMD is 'free' at the board level, the kind of
PMD generated is determined by the value at the processor
level.
If it is not 'free', the generated PMD is the most complete
kind of those indicated at the board and processor levels.
The kind of PMD order is as follows (from least to most
complete):
. min -> short -> long -> full. SEQUENCE OF AdnPmdBoardEntry .1.3.6.1.4.1.637.3.1.5.18.2 |
adnPmdBoardEntryAn entry in the board table. There will be one entry
for each board of a given node. AdnPmdBoardEntry .1.3.6.1.4.1.637.3.1.5.18.2.1 |
adnPmdBoardEnableDisableThis variable defines whether or not the post mortem dump
(PMD) is enabled at the board level. The PMD is enabled at
the board level only if it is also enabled at
the node level.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.2.1.1 |
adnPmdBoardKindOfPmdThis defines the type of post mortem dump (PMD) to execute.
This variable applies at the board level.
min : post mortem dump will be minimum (only the failure
~~~ context is provided) at the processor level, unless
. the value of adnPmdProcessorKindOfPmd is short,
. long or full.
. In this case, the more complete PMD is chosen.
short : post mortem dump will be short at the processor
~~~~~ level, unless the value of adnPmdProcessorKindOfPmd
. is long or full.
. In this case, the more complete PMD is chosen.
. Short means only the memory areas belonging to the
. faulty application and explicitly declared for the
. post mortem dump are extracted from the target
. memory.
long : post mortem dump will be long at the processor
~~~~ level, unless the value of adnPmdProcessorKindOfPmd
. is full.
. In this case, the full PMD is chosen.
. Long means all the memory areas explicitly declared
. by the applications for the post mortem dump are
. extracted from the target memory.
full : post mortem dump will be full (entire memory)
~~~~ at the processor level, no matter what the value is
. for adnPmdProcessorKindOfPmd, no matter what the
. memory areas declared by the applications are.
free : post mortem dump will be processed at the
~~~~ processor level according to the value of the
. adnPmdProcessorKindOfPmd object.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.2.1.2 |
adnPmdBoardFilterStatusThis variable defines whether or not the post mortem dump
(PMD) filter is enabled at the board level. The PMD filter
is enabled at the board level only if it is also enabled at
the node level.
The NMS can activate, deactivate or reset the PMD filter
using this variable.
After the reset action, the variable takes back its
previous value at board level (either enable or disable).rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.2.1.3 |
adnPmdProcessorTableThis object defines the status of the post mortem dump
(PMD) at the processor level.
The NMS can set or get the PMD status at the processor
level. SEQUENCE OF AdnPmdProcessorEntry .1.3.6.1.4.1.637.3.1.5.18.3 |
adnPmdProcessorEntryAn entry in the processor table. There will be one entry
for each processor of a given board. AdnPmdProcessorEntry .1.3.6.1.4.1.637.3.1.5.18.3.1 |
adnPmdProcessorEnableDisableThis variable defines whether or not the post mortem dump
(PMD) is enabled at the processor level. The PMD is enabled
at the processor level only if it is also enabled at the
board and node levels.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.3.1.1 |
adnPmdProcessorKindOfPmdThis defines the type of post mortem dump (PMD) to execute.
This variable applies at the processor level.
min : post mortem dump will provide failure context only.
~~~
short : only the memory areas belonging to the faulty
~~~~~ application and explicitly declared for the post
. mortem dump are extracted from the target memory.
long : all the memory areas explicitly declared by
~~~~ the applications for the post mortem dump are
. extracted from the target memory.
full : post mortem dump will be full (entire memory), no
~~~~ matter what the memory areas declared by the
. applications are.
free : the post mortem dump mechanism will decide itself
~~~~ the kind of PMD to do.rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.3.1.2 |
adnPmdProcessorFilterStatusThis variable defines whether or not the post mortem dump
(PMD) filter is enabled at the processor level.
The PMD filter is enabled at the processor level only if it
is also enabled at board and node levels.
The NMS can activate, deactivate or reset the PMD filter
using this variable.
After the reset action, the variable takes back its
previous value at processor level (either enable or
disable).rw Enumeration .1.3.6.1.4.1.637.3.1.5.18.3.1.3 |
adnIfAssocTableA list of point to point associations between the PSX/ACX internal
link interfaces. SEQUENCE OF AdnIfAssocEntry .1.3.6.1.4.1.637.3.1.5.19 |
adnIfAssocEntryAn association entry containing ifIndex of the first interface,
adnNodeIndex of the first node, ifIndex of the associated
interface, adnNodeIndex of the associated node and the type
of protocol used on these interfaces. AdnIfAssocEntry .1.3.6.1.4.1.637.3.1.5.19.1 |
adnFirstIfIndexThe value of this object corresponds to the ifIndex of the first
interface.ro INTEGER .1.3.6.1.4.1.637.3.1.5.19.1.1 |
adnFirstNodeIndexThe value of this object corresponds to the adnNodeIndex of the
first node.ro INTEGER .1.3.6.1.4.1.637.3.1.5.19.1.2 |
adnAssocIfIndexThe value of this object corresponds to the ifIndex of the
associated interface, this value is not significant in the case
where adnProtocolType is g25 or x75. In that case a GET request
on this OID will be replied with the response noSuchname into
error-status field.ro INTEGER .1.3.6.1.4.1.637.3.1.5.19.1.3 |
adnAssocNodeIndexThe value of this object corresponds to the adnNodeIndex of the
associated node, this value is not significant in the case
where adnProtocolType is g25 or x75. In that case a GET request
on this OID will be replied with the response noSuchname into
error-status field.ro INTEGER .1.3.6.1.4.1.637.3.1.5.19.1.4 |
adnProtocolTypeThe value of this object represents the protocol used on
interfaces. xfr and xcm protocols are ALCATEL proprietary
protocols that are used for PSX and ACX internal links.
x25 is a standard protocol that is used for connecting an
ACX configured as a concentrator to a PSX.
g25 is an ALCATEL proprietary protocol that is used for
connecting an ALCATEL 1100 NETWORK to another packet switching
network via an X25 gateway link. x75 is a standard protocol
used for connecting an ALCATEL 1100 NETWORK to another packet
switching network via an X75 gateway link.ro Enumeration .1.3.6.1.4.1.637.3.1.5.19.1.5 |
adnCES OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.20 |
adnCESConfTableA list of extra parameters associated to a
Circuit Emulation Service connection. SEQUENCE OF AdnCESConfEntry .1.3.6.1.4.1.637.3.1.5.20.1 |
adnCESConfEntryExtra parameters for describing a
Circuit Emulation Service connection. AdnCESConfEntry .1.3.6.1.4.1.637.3.1.5.20.1.1 |
adnCESClockModeIt defines the synchronization mode associated
to the Circuit Emulation Service connection:
- use the value defined in atmfCESCbrClockMode
- loop timing: proprietary mode used when the
line is in loop timing moderw Enumeration .1.3.6.1.4.1.637.3.1.5.20.1.1.1 |
adnCESTrunkCondDataIt specifies the pattern to be sent in the data
timeslot when trunk conditioning (fault condition)
on Constant Bit Rate interface is activated.
It only applies to structured data transfer
service.rw INTEGER .1.3.6.1.4.1.637.3.1.5.20.1.1.2 |
adnCESCondSignalIt specifies the pattern to be sent in the
signalling nibble (ABCD bits of CAS signalling)
when trunk conditioning (fault condition) on
Constant Bit Rate interface is activated.
It only applies to structured data transfer
service.rw INTEGER .1.3.6.1.4.1.637.3.1.5.20.1.1.3 |
adnCESUpDownTrapEnableIt indicates whether Circuit Emulation Service
trap should be generated on the Constant Bit
Rate interface.rw Enumeration .1.3.6.1.4.1.637.3.1.5.20.1.1.4 |
adnNmsVpn OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.21 |
adnNmsVpnTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.21.1 |
adnPVCConnectLowIfNameThe ifName of the low endpoint interface for this PVC
segment. The term low implies that this PVC segment
end-point has the numerically lower ifIndex value than
the connected/associated PVC segment end-point. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.21.1.1 |
adnPVCConnectHighIfNameThe ifName of the high endpoint interface for this PVC
segment. The term high implies that this PVC segment
end-point has the numerically higher ifIndex value than
the connected/associated PVC segment end-point. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.21.1.2 |
adnCvsiMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.22 |
adnCvsiSwitchInfoGroup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.22.1 |
adnCvsiTscChnlStateThis entry represents the status of the Tag Switch
Controller (TSC) channel. This channel connects
the HSS with the Tag Switch Controller (TSC).
Common Name: TSC Channel Statero Enumeration .1.3.6.1.4.1.637.3.1.5.22.1.1 |
adnCvsiActiveSesIdThis object indicates the active session ID of the
CVSI slave in the HSS. This value changes whenever
the slave is restarted, powered up, switched over
to or manually reset. The session IDs are used by the
Tag Switch Controller (TSC) to detect the loss of
synchronization.
Common Name: Active Session IDro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.1.2 |
adnCvsiPwrUpSesIdThis object indicates the power-up session ID of the
CVSI slave in the HSS. This value reflects the
session ID which was assigned when this slave was
powered up. This value may be used by the Tag Switch
Controller (TSC) for detecting a more serious
synchronization loss.
Common Name: PowerUp Session IDro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.1.3 |
adnCvsiSlaveIdThe slave ID corresponding to this instance of CVSI
slave in HSS. This value is relevant if we have
multiple slaves for each Tag Switch Controller (TSC).
Common Name: Salve IDro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.4 |
adnCvsiSwitchIdThe switch ID for the HSS in this Tag Switching Router
(TSR).
Common Name: Switch IDro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.5 |
adnCvsiControllerIdThe controller ID for the Tag Switch Controller (TSC)
in this Tag Switching Router (TSR).
Common Name: Controller IDro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.6 |
adnCvsiVersionIdThe version of the CVSI code running in this Tag
Switching Router (TSR).
Common Name: Version IDro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.7 |
adnCvsiMaxTrapWindowThe maximum number of traps which can be pending
in the CVSI slave in the HSS. The traps will be
pending if either the Tag Switch controller (TSC)
hasn't acknowledged them, or they could not be
sent for some reason.
Common Name: Max Trap Windowro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.8 |
adnCvsiCurrTrapWindowThe number of pending traps in the CVSI slave in the
HSS. The traps will be pending if either the Tag
Switch Controller (TSC) hasn't acknowledged them, or
they could not be sent for some reason.
Common Name: Current Trap Windowro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.9 |
adnCvsiMaxCmdWindowThe maximum number of commands which can be pending
in the CVSI slave in the HSS. A command will be
pending if it has not been processed by the CVSI
slave. This value is conveyed to the Tag Switch
controller.
Common Name: Max Cmd Windowro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.10 |
adnCvsiCurrCmdWindowThe number of pending commands in the CVSI slave in the
HSS. A command will be pending if it has not been
processed by the CVSI slave.
Common Name: Current Cmd Windowro INTEGER .1.3.6.1.4.1.637.3.1.5.22.1.11 |
adnCvsiSpacingStateIndicates whether traffic spacing is performed at all
TDP interfaces. Spacing is used to reduce the peak to
peak Cell Delay Variation (CDV) or to smoooth out bursty
traffic coming into the network or to perform rate
reduction.
Common Name: Spacing Staterw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.22.1.12 |
adnCvsiSpacingRateThe rate at which traffic will be spaced if
adnCvsiSpacingState is enabled. This rate is
specified in cells per second.
Common Name: Spacing Raterw INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.1.13 |
adnCvsiTscIfIndexThe ifIndex of the TSC interface for this switch.
Common Name: TSC ifIndexrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.22.1.14 |
adnTdpIfTableThis table describes the TDP Interface. This table
contains proprietary TDP interface configuration
parameters. There is one entry per TDP interface.
A TDP interface is a logical inter-node ATM interface
or an ATM interface Connected to the Tag Switch
Controller (TSC). SEQUENCE OF AdnTdpIfEntry .1.3.6.1.4.1.637.3.1.5.22.2 |
adnTdpIfEntryAn entry in the TDP interface table. There is one
entry per TDP interface. AdnTdpIfEntry .1.3.6.1.4.1.637.3.1.5.22.2.1 |
adnTdpIfLogicalNumThis is the logical interface number of this TDP
interface used by the Tag Switch Controller (TSC).
Common Name: Logical If Numberro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.1 |
adnTdpIfPhyDescThe description of the interface. It is the 20 byte
physical descriptor of the interface provided to the
Tag Switch Controller (TSC).
Common Name: Interface Physical Descro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.22.2.1.2 |
adnTdpIfTypeThis object provides the type of the interface
The following are the possible values it can hold:
1 - Tag switch controller (TSC) interface, it
connects the HSS to the Tag Switch Controller
(TSC).
2 - Tag distribution protocol (TDP) access interface,
it connects HSS to the Tag Edge Router (TER).
3 - Tag distribution protocol (TDP) trunk interace,
it is the trunk interface for the tagged data.
Common Name: Interface Typero Enumeration .1.3.6.1.4.1.637.3.1.5.22.2.1.3 |
adnTdpIfStateThis object provides the state of the interface
The following are the possible values it can hold:
1 - Interface Pending, the interface is being set up
2 - Interface Congested, the interface is congested
3 - Interface Opened, the interface is up
4 - Interface Up
5 - Interface Down
Common Name: Interface Statero Enumeration .1.3.6.1.4.1.637.3.1.5.22.2.1.4 |
adnTdpIfTrapSentThis object tells whether a trap has been sent to the
Tag Switch controller The following are the possible values
it can hold. A trap has to be sent when an interface
is brought up or down, This object tells whether a trap
has been sent after this event. The interface status
transition will be based on the the TDP interface
status (adnTdpIfState).
Common Name: Trap Sentro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.22.2.1.5 |
adnTdpIfPhyIfIndexThe ifIndex of the physical line supporting this TDP
interface.
Common Name: Physical IfIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.22.2.1.6 |
adnTdpIfPhyVpiThe Virtual Path Identifier (VPI) associated with the
physical line supporting this TDP interface.
Common Name: Physical VPIro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.7 |
adnTdpIfIuniIfIndexThe ifIndex of the internal UNI (I-UNI) on the Cell
Interconnection Gateway (CIG) associated with this TDP
interface. An internal UNI is used for the CVSI connection
between the Tag Switch Controller (TSC) and HSS. It is zero
if this is not a TSC interface (i.e if adnTdpIfType is
not equal to 'tsc').
Common Name: IUNI IfIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.22.2.1.8 |
adnTdpIfVciMaxThe maximum VCI value allowed on this interface.
Common Name: Max VCIro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.9 |
adnTdpIfVciMinThe minimum VCI value allowed on this interface.
Common Name: Min VCIro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.10 |
adnTdpIfMaxTDPConnThe maximum number of Tag Distribution protocol (TDP)
connections allowed on this interface.
Common Name: Max Connectionsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.11 |
adnTdpIfAvailConnEgressThe number of available Tag Distribution Protocol
(TDP) egress connections.
The egress direction means the direction of outwards
traffic flow from the interface.
Common Name: Available Egress Connectionsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.12 |
adnTdpIfAvailConnInThe number of available Tag Distribution Protocol
(TDP) ingress connections.
The ingress direction means the direction of inwards
traffic flow into the interface.
Common Name: Available Ingress Connectionsro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.13 |
adnTdpIfMaxCellRateEgressThe maximum egress cell rate available. The cell rate
is measured in Cells/Second. This value is configured
when an interface is created.
The egress direction means the direction of outwards
traffic flow from the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Egress Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.14 |
adnTdpIfMaxCellRateInThe maximum ingress cell rate available. The cell rate
is measured in Cells/Second. This value is configured
when an interface is created.
The ingress direction means the direction of inwards
traffic flow into the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Ingress Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.15 |
adnTdpIfAvailCellRateEgressThe available egress cell rate. The cell rate is
measured in Cells/Second.
The egress direction means the direction of outwards
traffic flow from the interface.
A value of -1 indicates that the field is not used.
Common Name: Available Egress Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.16 |
adnTdpIfAvailCellRateInThe available ingress cell rate.
The cell rate is measured in Cells/Second.
The ingress direction means the direction of inwards
traffic flow into the interface.
A value of -1 indicates that the field is not used.
Common Name: Available Ingress Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.17 |
adnTdpIfMaxCtdEgressThe maximum Cell Transfer Delay (CTD) for egress. This
value is configured when an interface is created.
The egress direction means the direction of outwards
traffic flow from the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Egress CTDro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.22.2.1.18 |
adnTdpIfMaxCtdInThe maximum Cell Transfer Delay (CTD) for ingress. This
value is configured when an interface is created.
The ingress direction means the direction of inwards
traffic flow into the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Ingress CTDro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.22.2.1.19 |
adnTdpIfMaxCdvEgressThe maximum Cell Delay Variation (CDV) for egress. This
value is configured when an interface is created.
The egress direction means the direction of outwards
traffic flow from the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Egress CDVro INTEGER (-2147483648..2147483647) -- UNITS microseconds .1.3.6.1.4.1.637.3.1.5.22.2.1.20 |
adnTdpIfMaxCdvInThe maximum Cell Delay Variation (CDV) for ingress. This
value is configured when an interface is created.
The ingress direction means the direction of inwards
traffic flow into the interface.
A value of -1 indicates that the field is not used.
Common Name: Max Ingress CDVro INTEGER (-2147483648..2147483647) -- UNITS microseconds .1.3.6.1.4.1.637.3.1.5.22.2.1.21 |
adnTdpIfRemoteLogicalNumThis entry represents the logical interface number
of the remote side of the TDP trunk.
This is the logical interface number of remote TDP
interface used by the Tag Switch Controller (TSC).
Common Name: Remote Logical Interface Numberro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.22 |
adnTdpIfRemoteNodeIdThis entry represents the node ID of the remote
side HSS node of the TDP trunk.
Common Name: Remote Node IDro AdnRoutingID .1.3.6.1.4.1.637.3.1.5.22.2.1.23 |
adnTdpIfPolicingStateIndicates whether traffic policing is performed on
this TDP interface. When policing is
disabled then no traffic spacing will be done at
the TDP interface no matter what the value of
adnCvsiSpacingState is.
Common Name: Policingrw AdnEnableDisabled .1.3.6.1.4.1.637.3.1.5.22.2.1.24 |
adnTdpIfPCRThe Peak Cell Rate (PCR) allowed for traffic through
this interface. This rate is specified in
cells per second.
Common Name: PCRro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.25 |
adnTdpIfABWThe bandwidth, measured in cells per second,
allocated to this TDP interface.
Common Name: Allocated Bandwidthro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.2.1.26 |
adnTdpIfRemNodeMacNumThe machine number part of
adnTdpIfRemoteNodeId.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.27 |
adnTdpIfRemNodeAreaNumThe area number part of
adnTdpIfRemoteNodeId.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.2.1.28 |
adnTdpIfLookupTableThis table is a lookup table where a CVSI logical
interface number is mapped to the corresponding
ATM logical interface ifIndex. The ATM logical
interface ifIndex is the index of the
adnTdpIfTable. SEQUENCE OF AdnTdpIfLookupEntry .1.3.6.1.4.1.637.3.1.5.22.3 |
adnTdpIfLookupEntryAn entry in the TDP Interface lookup Table.
There is one entry per TDP interface. AdnTdpIfLookupEntry .1.3.6.1.4.1.637.3.1.5.22.3.1 |
adnTdpIfIndexThe ATM logical interface ifIndex corresponding
to the given logical interface number. This
ifIndex is the index of the adnTdpIfTable.
Common Name: IfIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.22.3.1.1 |
adnAtmTdpConnTableThis table describes the TDP connections in the HSS.
There is one entry per TDP connection in the HSS. SEQUENCE OF AdnAtmTdpConnEntry .1.3.6.1.4.1.637.3.1.5.22.4 |
adnAtmTdpConnEntryAn entry in the CVSI HSS Connection Table.
There is one entry per TDP connection in the HSS. AdnAtmTdpConnEntry .1.3.6.1.4.1.637.3.1.5.22.4.1 |
adnAtmTdpConnVpiThe VPI of the ATM cross connection for this TDP
connection. This is also an index of the table.
Common Name: VPIro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.1 |
adnAtmTdpConnVciThe VCI of the ATM cross connection for this TDP
connection. This is also an index of the table.
Common Name: VCIro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.2 |
adnAtmTdpConnCconnectIndexThe index of the cross-connection for the Virtual Channel
Connection (VCC) on this interface. In a point-to-point
cross-connection, the index equals zero. In a point-to-
-multipoint cross-connection, there is a different index
for each leaf.
Common Name: Cross Connect Indexro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.3 |
adnAtmTdpConnPriSecThis object tells whether this end of the TDP connection
index is Primary or Secondary.
Common Name: Pri/Secro Enumeration .1.3.6.1.4.1.637.3.1.5.22.4.1.4 |
adnAtmTdpConnOutIfIndexThe ifIndex of this node's output ATM logical interface.
Common Name: Out IfIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.637.3.1.5.22.4.1.5 |
adnAtmTdpConnOutVpiThe Virtual Path Identifier (VPI) of this connection on the
output ATM interface from this node. In conjunction with
adnAtmTdpConnOutIfIndex, this VPI can be used for
path tracing.
Common Name: Out VPIro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.6 |
adnAtmTdpConnOutVciThe Virtual Connection Identifier (VCI) of this connection
on the output ATM interface from this node. In conjunction
with adnAtmTdpConnOutIfIndex, this VCI can be used for
path tracing.
Common Name: Out VCIro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.7 |
adnAtmTdpConnOutCconnectIndexThe index of the cross-connection for the Virtual Channel
Connection (VCC) on the output ATM interface from this node.
In a point-to-point cross-connection, the index equals
zero. In a point-to-multipoint cross-connection, there is
a different index for each leaf.
Common Name: Out Cross Connect Indexro INTEGER .1.3.6.1.4.1.637.3.1.5.22.4.1.8 |
adnAtmTdpConnStateThis object provides the state of the connection
The following are the possible values it can hold.
1 - Connection Reserved- Created but not activated
2 - Connection Active - Active state
Common Name: Conn Statero Enumeration .1.3.6.1.4.1.637.3.1.5.22.4.1.9 |
adnAtmTdpConnForwCellRateThe forward requested cell rate for this connection.
This value is configured when the connection is created.
Forward direction is the direction traffic from the
primary to the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.10 |
adnAtmTdpConnForwPCRThe forward peak cell rate (PCR) for the connection.
This value is configured when the connection is created.
Forward direction is the direction traffic from the
primary to the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward PCRro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.11 |
adnAtmTdpConnForwDelayThe maximum forward delay allowed for this connection.
This value is configured when the connection is created.
Forward direction is the direction traffic from the
primary to the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward Delayro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.22.4.1.12 |
adnAtmTdpConnForwDelayVariationThe maximum Cell Delay Variation (CDV) in the forward
direction allowed for this connection. This value is
configured when the connection is created. Forward
direction is the direction traffic from the primary to
the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward CDVro INTEGER (-2147483648..2147483647) -- UNITS microseconds .1.3.6.1.4.1.637.3.1.5.22.4.1.13 |
adnAtmTdpConnRevCellRateThe reverse requested cell rate for this connection.
This value is configured when the connection is created.
Reverse direction is the direction of traffic from
the secondary to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse Cell Ratero INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.14 |
adnAtmTdpConnRevPCRThe reverse peak cell rate (PCR) for this connection.
This value is configured when the connection is created.
Reverse direction is the direction of traffic from
the secondary to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse PCRro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.15 |
adnAtmTdpConnRevDelayThe maximum reverse delay allowed for this connection.
This value is configured when the connection is created.
Reverse direction is the direction of traffic from
the secondary to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse Delayro INTEGER (-2147483648..2147483647) -- UNITS milliseconds .1.3.6.1.4.1.637.3.1.5.22.4.1.16 |
adnAtmTdpConnRevDelayVariationThe maximum Cell Delay Variation (CDV) in the reverse
direction allowed for this connection. This value is
configured when the connection is created. Reverse
direction is the direction of traffic from the secondary
to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse CDVro INTEGER (-2147483648..2147483647) -- UNITS microseconds .1.3.6.1.4.1.637.3.1.5.22.4.1.17 |
adnAtmTdpConnPriPersEPFlagThis object reflects the primary Persistent End point
flag. This flag indicates that this part of connection
is the first leg of a tag distribution protocol (TDP)
connection. The first leg of the connection terminates
at a tag edge router (TER).
Common Name: Primary Endpoint Flagro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.22.4.1.18 |
adnAtmTdpConnSecPersEPFlagThis object reflects the secondary Persistent End point
flag. This flag indicates that this part of connection
is last leg of a tag distribution protocol (TDP)
connection. The last leg of the connection terminates
into a tag edge router (TER).
Common Name: Secondry Endpoint Flagro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.22.4.1.19 |
adnAtmTdpConnForwSCRThe forward sustainable cell rate (SCR) for this
connection. Forward direction is the direction traffic
from the primary to the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward SCRro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.20 |
adnAtmTdpConnForwMBSThe forward maximum burst size (MBS) for this connection.
Forward direction is the direction of traffic from the
primary to the secondary interface.
A value of -1 indicates that the field is not used.
Common Name: Forward MBSro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.4.1.21 |
adnAtmTdpConnRevSCRThe Reverse sustainable cell rate (SCR) for this
connection. Reverse direction is the direction traffic
from the secondary to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse SCRro INTEGER (-2147483648..2147483647) -- UNITS cells/sec .1.3.6.1.4.1.637.3.1.5.22.4.1.22 |
adnAtmTdpConnRevMBSThe reverse maximum burst size (MBS) for this connection.
Reverse direction is the direction of traffic from the
secondary to the primary interface.
A value of -1 indicates that the field is not used.
Common Name: Reverse MBSro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.22.4.1.23 |
adnAtmTdpConnForwServTypeThe forward service type for a connection. It is a value
which specifies what class of service has been requested
for this connection in forward direction.
Forward direction is the direction traffic from the
primary to the secondary interface.
Common Name: Forward Service Typero AdnCvsiCos .1.3.6.1.4.1.637.3.1.5.22.4.1.24 |
adnAtmTdpConnRevServTypeThe reverse service type for a connection. It is a value
which specifies what class of service has been requested
for this connection in reverse direction.
Reverse direction is the direction of traffic from
the secondary to the primary interface.
Common Name: Reverse Service Typero AdnCvsiCos .1.3.6.1.4.1.637.3.1.5.22.4.1.25 |
adnIprtMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.23 |
adnIpRouteNodeTableThis is the IP Routing Configuration Table SEQUENCE OF AdnIpRouteNodeEntry .1.3.6.1.4.1.637.3.1.5.23.1 |
adnIpRouteNodeEntryThe IP Route Node Entry defines IP Routing Node Table Entries. AdnIpRouteNodeEntry .1.3.6.1.4.1.637.3.1.5.23.1.1 |
adnIpRouteConfigIndexThis object defines the Index into this table. This index will
represent only one instance of any object in this table.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.23.1.1.1 |
adnIpRouteConfigFilePtrThis object defines the pointer to an ASCII string that
points to the IP routing Configuration path/file on the HSS CU disk.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.23.1.1.2 |
adnIpRouteConfigAdminStateThis object indicates the desired state of the IP Routing (GateD)
component. There are typically only two selection states, Enabled(1) or
Disabled(2).rw Enumeration .1.3.6.1.4.1.637.3.1.5.23.1.1.3 |
adnIpRouteConfigOperStateThis object indicates the current state of the IP Routing (GateD)
component. There are typically only two states possible, Up(1) or
Down(2).rw Enumeration .1.3.6.1.4.1.637.3.1.5.23.1.1.4 |
adnIpfwdsMIB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.5.24 |
adnIpIfStackTableThe table containing information on the relationship
between an IP interface and its correponding AAL5 connections
(or indices). Each of these multiplexed entities correspond
to a conceptual row in the ifTable. SEQUENCE OF AdnIpIfStackEntry .1.3.6.1.4.1.637.3.1.5.24.1 |
adnIpIfStackEntryInformation on a particular relationship between
IP interface and its corresponding AAL5 connections.
Each of the multiplexed ifIndex has a conceptual
row in the ifTable. AdnIpIfStackEntry .1.3.6.1.4.1.637.3.1.5.24.1.1 |
adnIpIfStackHigherLayerThe value of ifIndex corresponding to the IP interface
which runs on 'top of' an AAL5 connection identified
by a corresponding instance of adnIpIfStackLowerLayer. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.24.1.1.1 |
adnIpIfStackLowerLayerThe value of ifIndex corresponding to an AAL5 connection
which runs 'below' the IP interface identified by the
correponding instance of adnIpIfStackHigherLayer. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.5.24.1.1.2 |
adnIpIfStackStatusThe status of the relationship between two sub-
layers.
Changing the value of this object from 'active' to
'notInService' or 'destroy' will likely have
consequences up and down a connection.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.5.24.1.1.3 |
adnMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6 |
adnTrapsCommon OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.1 |
adnTrapsFrameRelay OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.2 |
adnTrapsATM OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.3 |
adnTrapsTDM OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.4 |
adnTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.5 |
adnMIBTrapVarsEquipStatusTextIf present in an adnEquipStatusChange trap, this object
contains diagnostic text describing the reason for the
equipment status change. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.1 |
adnTrapCategoryFor the trap currently being sent, category of the trap
that occurs as a variable-binding of an SNMP trap PDU. Enumeration .1.3.6.1.4.1.637.3.1.6.5.2 |
adnTrapFrVCDLCIIndexThis object defines the index of the DLCI of the local
end of the VC. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.3 |
adnTrapFrCongsStateCurrent state of congestion for the affected channel
or interface. AdnCongestLevels .1.3.6.1.4.1.637.3.1.6.5.4 |
adnTrapFrIfTypeType of interface affected. Enumeration .1.3.6.1.4.1.637.3.1.6.5.5 |
adnTrapFrCongOriginOrigin of the congestion trap. Enumeration .1.3.6.1.4.1.637.3.1.6.5.6 |
adnTrapReasonThe reason for sending this trap (usually, the type
of the cause object).
atm-line: ATM line,
fr-line: Frame Relay line,
lis-link: Local Inchannel Signalling (LIS) link,
lapf-lapd-link: LAPF/LAPD protocol,
nms-initiated: NMS-initiated via SNMP SET command,
atm-interface: ATM interface,
xfr-line: Alcatel protocol for Frame Relay PSX trunk,
xcm-link: Alcatel protocol for X.25 PSX trunk,
x25-gateway: X.25 link to other (non ACX) X.25 network,
x75-gateway: X.75 link to other X.25 network,
x25-link: PSX-ACX trunk (ACX is an X.25 PSX subscriber). Enumeration .1.3.6.1.4.1.637.3.1.6.5.7 |
adnEquipCauseThis variable indicates the specific cause of
the problem which has occurred on the equipment
(chassis or board). AdnEquipCause .1.3.6.1.4.1.637.3.1.6.5.8 |
adnX3CauseErrorThe cause of the DS3/E3 trap currently being sent.
This variable occurs as a variable-binding of an
SNMP Trap PDU. Enumeration .1.3.6.1.4.1.637.3.1.6.5.9 |
adnSonetTrapCauseVariable that gives cause of the Sonet trap currently
being sent. Occurs as a variable-binding of an SNMP
trap. Enumeration .1.3.6.1.4.1.637.3.1.6.5.10 |
adnHssStrNameThe STR identifier within the HSS. This is
a number unique to a specific STR event type. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.11 |
adnHssStrHeaderHeader information in the STR which includes:
STR indentifier (adnHssStrName)
date and time
urgency level
sender identifier (node, board type, chassis, slot,
processor)
software package informationobsolete OCTET STRING .1.3.6.1.4.1.637.3.1.6.5.12 |
adnHssStrMoreInfoAdditional information eventually contained in the STR.
This field may be empty. OCTET STRING .1.3.6.1.4.1.637.3.1.6.5.13 |
adnAtmVpiVirtual Path Index (VPI) value on the ATM interface.
Always significant.ro INTEGER .1.3.6.1.4.1.637.3.1.6.5.14 |
adnAtmVciVirtual Channel Index (VCI) value on the ATM interface. The
not significant value is 0.ro INTEGER .1.3.6.1.4.1.637.3.1.6.5.15 |
adnAtmCconnectIndexIndex of the ATM cross-connection. INTEGER .1.3.6.1.4.1.637.3.1.6.5.16 |
adnAtmCconnectAdminStatusValue that identifies the administrative status of an ATM
cross-connection. AdnAtmAdminStatus .1.3.6.1.4.1.637.3.1.6.5.17 |
adnAtmCconnectOperStatusValue that identifies the current operational status of an
ATM cross-connection. AdnAtmUniOperStatus .1.3.6.1.4.1.637.3.1.6.5.18 |
adnAtmCcCauseErrorCause of the User to Network Interface (UNI) cross-
connection trap currently being sent. Occurs as a variable-
binding of an SNMP Trap Packet Data.
Unit (PDU). Enumeration .1.3.6.1.4.1.637.3.1.6.5.19 |
adnAtmInterfaceCauseErrorCause of the ATM interface error trap. Enumeration .1.3.6.1.4.1.637.3.1.6.5.20 |
adnPmdDumpFilePathNamePMD pathname built in the NMS transfer directory. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.21 |
adnPmdDumpExecutionReportIf the PMD has actually been built, it is ok(1). If it
has not been built because the filter mechanism knows that
a PMD was previously built for the same fault, it is
alreadyBuilt(3), and the file name is filled with the
known value. Enumeration .1.3.6.1.4.1.637.3.1.6.5.22 |
adnPmdFailedDiagnosticThe diagnostic is sent to explain why the PMD
failed. The significance of each value is
described in the document 3CB00572AAAAUBZZA. Enumeration .1.3.6.1.4.1.637.3.1.6.5.23 |
adnPmdFrequencyCountThis variable indicates how often a particular
fault is occurring. INTEGER .1.3.6.1.4.1.637.3.1.6.5.24 |
adnPmdTargetIdentificationThis variable indicates the processor experiencing
the fault.
The variable is expressed with 5 digits.
The first one gives the chassis number,
the next two digits give the slot number and
the two last digits give the processor number.
So, the value CSSPP means that the PMD has been
generated by the processor PP of the slot SS of
the chassis C. INTEGER .1.3.6.1.4.1.637.3.1.6.5.25 |
adnAtmCconnectLastCanpCauseLast Cell Alcatel Network Protocol (CANP) cause. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.26 |
adnAtmCconnectLastErrorNodeIDThe identifier of the node detecting the error. AdnRoutingID .1.3.6.1.4.1.637.3.1.6.5.27 |
adnAtmCconnectLastLocationATM forum location value in the cause information element. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.28 |
adnAtmCconnectLastCauseATM forum cause value in the cause information element. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.29 |
adnAtmCconnectLastDiagATM forum diagnostic value in the cause information
element. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.30 |
adnAtmInterfaceTCCauseErrorVariable that gives the cause of the ATM interface
Transmission/Convergence trap currently being sent. Occurs
as a variable-binding of an SNMP trap PDU. Enumeration .1.3.6.1.4.1.637.3.1.6.5.31 |
adnAtmCellLossTrapCauseVariable that gives cause of the ATM Traffic
Management trap currently being sent.
Occurs as a variable-binding of an SNMP
trap. Enumeration .1.3.6.1.4.1.637.3.1.6.5.32 |
adnDsx1ErrorCauseThe cause of the DS1/E1 trap currently being sent.
This variable occurs as a variable-binding of an
SNMP Trap PDU. Enumeration .1.3.6.1.4.1.637.3.1.6.5.33 |
adnPmdMscCrashClassThis field contains the class of the crash:
- unknown(-1): the processor has been reset by an
. external cause.
- stop(0) : the reset has been asked by an process.
- str(1) : a fatal str occurred.
- system(2) : an exception or a system panic
. occurred.
- other(3) : other. Enumeration .1.3.6.1.4.1.637.3.1.6.5.34 |
adnPmdMscCrashOriginThis field depends on the adnPmdMscCrashClass.
If adnPmdMscCrashClass is 'str' then the str
name is given.
If adnPmdMscCrashClass is 'stop' the process
name is given.
If adnPmdMscCrashClass is 'system' the name of
running process when the fault occurred is given. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.35 |
adnPmdMscCrashTimeThis field is used to give the time the crash
occurred at the MSC (Medium Speed Coupler) level. AdnNodeTimeTicks .1.3.6.1.4.1.637.3.1.6.5.36 |
adnPsxNmcAlarmCodeThe value of this object is the code of the alarm received from
the NMC.
Common name: alarm code INTEGER .1.3.6.1.4.1.637.3.1.6.5.37 |
adnPsxFtdIndexThe value of this object corresponds to the adnEquipIndex
of the FTD card.
Common name: Equip Index INTEGER .1.3.6.1.4.1.637.3.1.6.5.38 |
adnPsxFrontEndNumberThe value of this object corresponds to the Front end number
in the alarm data.
Common name: PSX Front End Number INTEGER .1.3.6.1.4.1.637.3.1.6.5.39 |
adnPsxCouplerIndexThe value of this object corresponds to the adnEquipIndex
of the coupler.
Common name: Equip Index INTEGER .1.3.6.1.4.1.637.3.1.6.5.40 |
adnPsxCouplerNumberThe value of this object corresponds to the Coupler number
in the alarm data.
Common name: PSX Coupler Number INTEGER .1.3.6.1.4.1.637.3.1.6.5.41 |
adnAtmCconnectLastMachineThe machine number part of adnAtmCconnectLastErrorNodeID. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.42 |
adnAtmCconnectLastAreaThe area number part of adnAtmCconnectLastErrorNodeID. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.43 |
adnAtmCconnectLastChassisThe chassis number detecting the error. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.44 |
adnAtmCconnectLastSlotThe slot number of the board detecting the error. INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.637.3.1.6.5.45 |
adnHssStrYearThe year of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.46 |
adnHssStrMonthThe month of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.47 |
adnHssStrDayThe day of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.48 |
adnHssStrHourThe hour of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.49 |
adnHssStrMinuteThe minute of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.50 |
adnHssStrSecondThe second of the STR appearance. INTEGER .1.3.6.1.4.1.637.3.1.6.5.51 |
adnHssStrLevelThe STR level :
1 : fatal for nobody
2 : fatal for the sending application
3 : fatal for the local processor
4 : fatal for the local board
5 : fatal for the node. Enumeration .1.3.6.1.4.1.637.3.1.6.5.52 |
adnHssStrNodeIdentify the node where the STR appears. INTEGER .1.3.6.1.4.1.637.3.1.6.5.53 |
adnHssStrBoardTypeBoard type of the board where the STR appears.
(Used only by HSS development teams.
The values are described in gif_hss_equip.h .) INTEGER .1.3.6.1.4.1.637.3.1.6.5.54 |
adnHssStrChassisChassis identifier in the node where the STR appears. INTEGER .1.3.6.1.4.1.637.3.1.6.5.55 |
adnHssStrSlotSlot identifier in the chassis where the STR appears. INTEGER .1.3.6.1.4.1.637.3.1.6.5.56 |
adnHssStrProcessorProcessor number on the board where the STR appears. INTEGER .1.3.6.1.4.1.637.3.1.6.5.57 |
adnHssStrSwpidThe software package identifier. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.58 |
adnHssStrStaddAddress of the software package. INTEGER .1.3.6.1.4.1.637.3.1.6.5.59 |
adnHssStrFileThe source file name. DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.60 |
adnHssStrLineLine number in the source file. INTEGER .1.3.6.1.4.1.637.3.1.6.5.61 |
adnHssStrPcProgram counter. INTEGER .1.3.6.1.4.1.637.3.1.6.5.62 |
adnHssStrObjectThe action or object that triggers the STR DisplayString (SNMPv2-TC) .1.3.6.1.4.1.637.3.1.6.5.63 |
adnHssStrErrorCodeError code. INTEGER .1.3.6.1.4.1.637.3.1.6.5.64 |
adnTrapFrVCCosClass of Service for Frame Relay. AdnFrCos .1.3.6.1.4.1.637.3.1.6.5.67 |
adnBrdFlashUpdateErrorCodeThis object identifies a specific error for flash update.
Values are:
msupTimeout - on-line flash update failed due to a Main
Supervisor timeout.
flashWriteError - on-line flash update failed due to a
flash write error.
offlineFlashUpdateError - off-line flash update failed. Enumeration .1.3.6.1.4.1.637.3.1.6.5.68 |
adnBrdFlashBuildErrorCodeThis object identifies a specific error for flash build.
flashVolumeWriteError - an error occured while creating or writing
the flash volume file on the Control Unit.
This may be a disk space problem.
openDescriptionFileError - the flash description file can not be
opened. This may be due to a permission
problem or to the absence of this file on
the Control Unit.
descriptionFileSyntaxError - there is some syntax error within
the description file.
flashComponentFileMissing - a file to be gathered in the flash volume
can not be found on the Control Unit.
nectarFileManagementError - a Nectar File Management error occured.
otherError - any error other than the above ones. Enumeration .1.3.6.1.4.1.637.3.1.6.5.69 |
adnTrapsPsxAcx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.6.6 |
adnMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.7 |
adnEnvironment OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8 |
adnEnvTp4900 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.1 |
adnEnvTp8000 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.2 |
adnEnvTp4800 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.3 |
adnEnvTp3000 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.4 |
adnEnvHss OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.5 |
adnEnvPsx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.6 |
adnEnvAcx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.8.7 |
adnErrors OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9 |
adnUCNodeErrors OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1 |
adnUCNodeErrorsSfas OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.1 |
adnUCNodeErrorsSfasInternalErr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.1.1 |
adnUCNodeErrorsNmgs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2 |
adnUCNodeErrorsNmgsInvalidEvent OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.1 |
adnUCNodeErrorsNmgsTimingProblem OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.2 |
adnUCNodeErrorsNmgsSoftwareError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.3 |
adnUCNodeErrorsNmgsTooLongSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.4 |
adnUCNodeErrorsNmgsNullInmpSend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.10 |
adnUCNodeErrorsNmgsInmpSend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.11 |
adnUCNodeErrorsNmgsControlBlock OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.12 |
adnUCNodeErrorsNmgsPfxiAccess OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.13 |
adnUCNodeErrorsNmgsStatusRequest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.14 |
adnUCNodeErrorsNmgsNoFullConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.15 |
adnUCNodeErrorsNmgsNoDelta OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.16 |
adnUCNodeErrorsNmgsNoRollback OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.17 |
adnUCNodeErrorsNmgsBoardStatus OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.18 |
adnUCNodeErrorsNmgsLoadFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.19 |
adnUCNodeErrorsNmgsTransList OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.20 |
adnUCNodeErrorsNmgsEventState OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.30 |
adnUCNodeErrorsNmgsTimeout OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.31 |
adnUCNodeErrorsNmgsProcResetRequest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.50 |
adnUCNodeErrorsNmgsProcStatusRequest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.51 |
adnUCNodeErrorsNmgsProcNoSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.52 |
adnUCNodeErrorsNmgsSllOpen OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.53 |
adnUCNodeErrorsNmgsNoDownloadCmdFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.54 |
adnUCNodeErrorsNmgsUndefFileInSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.55 |
adnUCNodeErrorsNmgsSendSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.56 |
adnUCNodeErrorsNmgsNoSmiFileStatus OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.57 |
adnUCNodeErrorsNmgsBadSwInd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.58 |
adnUCNodeErrorsNmgsDataSetError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.59 |
adnUCNodeErrorsNmgsBadFwSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.60 |
adnUCNodeErrorsNmgsBadFwInd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.61 |
adnUCNodeErrorsNmgsProcDown OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.62 |
adnUCNodeErrorsNmgsGeneralError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.69 |
adnUCNodeErrorsNmgsLocNoSuchInstance OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.70 |
adnUCNodeErrorsNmgsLocNoSuchService OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.71 |
adnUCNodeErrorsNmgsLocError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.72 |
adnUCNodeErrorsNmgsIacsSend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.73 |
adnUCNodeErrorsNmgsBadPfxiFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.74 |
adnUCNodeErrorsNmgsLocQaFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.75 |
adnUCNodeErrorsNmgsFwDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.201 |
adnUCNodeErrorsNmgsFwSll OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.202 |
adnUCNodeErrorsNmgsFwDupFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.203 |
adnUCNodeErrorsNmgsFwOpenFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.204 |
adnUCNodeErrorsNmgsNoFwInv OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.205 |
adnUCNodeErrorsNmgsUncomAvail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.210 |
adnUCNodeErrorsNmgsUncomRunning OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.211 |
adnUCNodeErrorsNmgsScriptFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.212 |
adnUCNodeErrorsNmgsCopyError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.213 |
adnUCNodeErrorsNmgsSysError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.214 |
adnUCNodeErrorsNmgsCleanDir OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.215 |
adnUCNodeErrorsNmgsFileError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.216 |
adnUCNodeErrorsNmgsInstallDsError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.217 |
adnUCNodeErrorsNmgsDeleteBrd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.218 |
adnUCNodeErrorsNmgsMergeDelta OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.219 |
adnUCNodeErrorsNmgsCuSw OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.220 |
adnUCNodeErrorsNmgsBrdSw OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.221 |
adnUCNodeErrorsNmgsCuConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.222 |
adnUCNodeErrorsNmgsBrdConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.223 |
adnUCNodeErrorsNmgsSfasMib OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.224 |
adnUCNodeErrorsNmgsBkupNeCuCodeDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.225 |
adnUCNodeErrorsNmgsBkupNeCuConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.226 |
adnUCNodeErrorsNmgsBkupBrdConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.227 |
adnUCNodeErrorsNmgsBkupPrCodeDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.228 |
adnUCNodeErrorsNmgsBkupCuCodeFl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.229 |
adnUCNodeErrorsNmgsBkupCuConfFl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.230 |
adnUCNodeErrorsNmgsBkupBrdConfFl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.231 |
adnUCNodeErrorsNmgsBkupPrCodeFl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.232 |
adnUCNodeErrorsNmgsAllCuConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.233 |
adnUCNodeErrorsNmgsReplCuConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.234 |
adnUCNodeErrorsNmgsReplSfasMibDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.235 |
adnUCNodeErrorsNmgsAppCuCodeDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.236 |
adnUCNodeErrorsNmgsAppCuDataDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.237 |
adnUCNodeErrorsNmgsWriteCuCodeDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.238 |
adnUCNodeErrorsNmgsBkupCuCodeDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.239 |
adnUCNodeErrorsNmgsAppCuSwDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.240 |
adnUCNodeErrorsNmgsUpdBrdConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.241 |
adnUCNodeErrorsNmgsAllBrdConfDs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.242 |
adnUCNodeErrorsNmgsDupFwInv OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.300 |
adnUCNodeErrorsNmgsNotOnUptList OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.301 |
adnUCNodeErrorsNmgsNoDldCmdFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.302 |
adnUCNodeErrorsNmgsTooManySwp OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.303 |
adnUCNodeErrorsNmgsNoFwInvFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.304 |
adnUCNodeErrorsNmgsNoSrliFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.305 |
adnUCNodeErrorsNmgsNoSllFile OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.350 |
adnUCNodeErrorsNmgsDeclareSm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.400 |
adnUCNodeErrorsNmgsInstallSm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.401 |
adnUCNodeErrorsNmgsDelcareCm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.402 |
adnUCNodeErrorsNmgsVerifySm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.403 |
adnUCNodeErrorsNmgsActivateSm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.404 |
adnUCNodeErrorsNmgsIsolateCm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.405 |
adnUCNodeErrorsNmgsMajorVersionCm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.406 |
adnUCNodeErrorsNmgsValidateSm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.407 |
adnUCNodeErrorsNmgsSuppressSm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.408 |
adnUCNodeErrorsNmgsDeactivateCm OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.409 |
adnUCNodeErrorsNmgsUnknownVsn OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.450 |
adnUCNodeErrorsNmgsConfirmLinkTO OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.451 |
adnUCNodeErrorsNmgsNmciMsgFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.2.452 |
adnUCNodeErrorsFrs OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5 |
adnUCNodeErrorsFrsNoDelete OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1 |
adnUCNodeErrorsFrsNotConfigPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.2 |
adnUCNodeErrorsFrsInvalLength OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.5 |
adnUCNodeErrorsFrsNoMemory OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.6 |
adnUCNodeErrorsFrsInvalAddrLength OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.7 |
adnUCNodeErrorsFrsInvalType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.8 |
adnUCNodeErrorsFrsFailLimit OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.9 |
adnUCNodeErrorsFrsFailList OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.10 |
adnUCNodeErrorsFrsFailString OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.11 |
adnUCNodeErrorsFrsFailScan OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.19 |
adnUCNodeErrorsFrsNotUpdPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.20 |
adnUCNodeErrorsFrsInvIntfTranId OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.257 |
adnUCNodeErrorsFrsIntfNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.258 |
adnUCNodeErrorsFrsIntfNotIns OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.259 |
adnUCNodeErrorsFrsIntfTransNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.260 |
adnUCNodeErrorsFrsIntfDelWithVC OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.264 |
adnUCNodeErrorsFrsIntfDelFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.266 |
adnUCNodeErrorsFrsIntfLlceFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.267 |
adnUCNodeErrorsFrsIntfInconsTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.268 |
adnUCNodeErrorsFrsIntfInvalTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.269 |
adnUCNodeErrorsFrsIntfAddMod OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.270 |
adnUCNodeErrorsFrsDelTransFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.271 |
adnUCNodeErrorsFrsIntfIntErr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.272 |
adnUCNodeErrorsFrsVCInconsTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.513 |
adnUCNodeErrorsFrsInvVCTranId OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1025 |
adnUCNodeErrorsFrsIntfNotUp OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1026 |
adnUCNodeErrorsFrsVCNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1027 |
adnUCNodeErrorsFrsVCNotIns OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1028 |
adnUCNodeErrorsFrsVCTransNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1029 |
adnUCNodeErrorsFrsVCDelFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1032 |
adnUCNodeErrorsFrsVCAddFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1033 |
adnUCNodeErrorsFrsVCInvalTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1037 |
adnUCNodeErrorsFrsVCAddMod OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1038 |
adnUCNodeErrorsFrsVCDelTransFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1039 |
adnUCNodeErrorsFrsVCIntErr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1040 |
adnUCNodeErrorsFrsFrcInvalTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1041 |
adnUCNodeErrorsFrsFrcInvalIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1281 |
adnUCNodeErrorsFrsNoMemFrcPath OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1282 |
adnUCNodeErrorsFrsIntfFrsSWFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.5.1536 |
adnUCNodeErrorsIsna OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6 |
adnUCNodeErrorsIsnaAddConnDelPend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.257 |
adnUCNodeErrorsIsnaAddIfindexRoute1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.515 |
adnUCNodeErrorsIsnaInvDlciIcRoute OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.516 |
adnUCNodeErrorsIsnaInvIpAdrIcRoute OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.517 |
adnUCNodeErrorsIsnaAddConnDelPendRoute OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.518 |
adnUCNodeErrorsIsnaAddRouteNoSuchObj OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.519 |
adnUCNodeErrorsIsnaAddConfResourceUnavail1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1025 |
adnUCNodeErrorsIsnaAddConfRefused1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1026 |
adnUCNodeErrorsIsnaAddConfRangeErr1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1027 |
adnUCNodeErrorsIsnaAddConfTableName1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1028 |
adnUCNodeErrorsIsnaAddConfResourceUnavail2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1029 |
adnUCNodeErrorsIsnaAddConfRefused2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1030 |
adnUCNodeErrorsIsnaAddConfRangeErr2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1031 |
adnUCNodeErrorsIsnaAddConfTableName2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.1032 |
adnUCNodeErrorsIsnaDelInvalid OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2305 |
adnUCNodeErrorsIsnaDelInvTblName OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2306 |
adnUCNodeErrorsIsnaDelConfPend1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2307 |
adnUCNodeErrorsIsnaDelRouteInvIfindex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2561 |
adnUCNodeErrorsIsnaDelRouteInvDlci OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2562 |
adnUCNodeErrorsIsnaDelDelPend2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2563 |
adnUCNodeErrorsIsnaDelRouteInvIp1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2564 |
adnUCNodeErrorsIsnaDelRouteInvIp2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.6.2565 |
adnUCNodeErrorsIsom OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7 |
adnUCNodeErrorsIsomAddLineDelPend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.257 |
adnUCNodeErrorsIsomAddConnDelPend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.513 |
adnUCNodeErrorsIsomAddIfindexTrp1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.769 |
adnUCNodeErrorsIsomInvDlciIcTrp OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.770 |
adnUCNodeErrorsIsomAddConnDelPendTrp OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.772 |
adnUCNodeErrorsIsomAddIfindexTrp2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.773 |
adnUCNodeErrorsIsomAddTrpNoSuchObj OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.774 |
adnUCNodeErrorsIsomAddConfRefused1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1025 |
adnUCNodeErrorsIsomAddConfRangeErr1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1026 |
adnUCNodeErrorsIsomAddConfTableName1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1028 |
adnUCNodeErrorsIsomAddConfRefused2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1029 |
adnUCNodeErrorsIsomAddConfRangeErr2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1030 |
adnUCNodeErrorsIsomAddConfTableName2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1032 |
adnUCNodeErrorsIsomAddConfResourceUnavail1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1033 |
adnUCNodeErrorsIsomAddConfResourceUnavail2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.1034 |
adnUCNodeErrorsIsomDelInvalid OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2305 |
adnUCNodeErrorsIsomDelInvTblName OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2306 |
adnUCNodeErrorsIsomDelConfPend1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2307 |
adnUCNodeErrorsIsomDelTrapInvIfindex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2561 |
adnUCNodeErrorsIsomDelTrapInvDlci OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2562 |
adnUCNodeErrorsIsomDelDelPend2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2563 |
adnUCNodeErrorsIsomDelTrapInvIp1 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2564 |
adnUCNodeErrorsIsomDelTrapInvIp2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2565 |
adnUCNodeErrorsIsomDelLineInvState OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.7.2817 |
adnUCNodeErrorsFraSi OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10 |
adnUCNodeErrorsFraSiLength2Big OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.5 |
adnUCNodeErrorsFraSiNoMalloc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.6 |
adnUCNodeErrorsFraSiAddr2Long OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.7 |
adnUCNodeErrorsFraSiBadType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.8 |
adnUCNodeErrorsFraSiCreateFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.258 |
adnUCNodeErrorsFraSiGetTransFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.260 |
adnUCNodeErrorsFraSiUpdateFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.266 |
adnUCNodeErrorsFraSiUpdateWoCreate OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.268 |
adnUCNodeErrorsFraSiIntfInternalErr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.269 |
adnUCNodeErrorsFraSiNoConfigUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.10.304 |
adnUCNodeErrorsLdrFlip OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12 |
adnUCNodeErrorsLdrFlipGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.1 |
adnUCNodeErrorsLdrFlipIfIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.2 |
adnUCNodeErrorsLdrFlipValue OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.3 |
adnUCNodeErrorsLdrFlipTableFormat OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.4 |
adnUCNodeErrorsLdrFlipConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.5 |
adnUCNodeErrorsLdrFlipGet OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.6 |
adnUCNodeErrorsLdrFlipGetFirst OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.7 |
adnUCNodeErrorsLdrFlipGetNext OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.8 |
adnUCNodeErrorsLdrFlipSet OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.9 |
adnUCNodeErrorsLdrFlipUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.10 |
adnUCNodeErrorsLdrFlipTest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.11 |
adnUCNodeErrorsLdrFlipUpdateFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.12 |
adnUCNodeErrorsLdrFlipGetTransFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.13 |
adnUCNodeErrorsLdrFlipCreateLcbFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.12.14 |
adnUCNodeErrorsLdrQuicc OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13 |
adnUCNodeErrorsLdrQuiccGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.1 |
adnUCNodeErrorsLdrQuiccIfIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.2 |
adnUCNodeErrorsLdrQuiccValue OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.3 |
adnUCNodeErrorsLdrQuiccTableFormat OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.4 |
adnUCNodeErrorsLdrQuiccConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.5 |
adnUCNodeErrorsLdrQuiccGet OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.6 |
adnUCNodeErrorsLdrQuiccGetFirst OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.7 |
adnUCNodeErrorsLdrQuiccGetNext OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.8 |
adnUCNodeErrorsLdrQuiccSet OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.9 |
adnUCNodeErrorsLdrQuiccUpdate OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.10 |
adnUCNodeErrorsLdrQuiccTest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.11 |
adnUCNodeErrorsLdrQuiccUpdateFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.12 |
adnUCNodeErrorsLdrQuiccNoMoreRoomForIfIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.13 |
adnUCNodeErrorsLdrQuiccGetTransFailed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.13.14 |
adnUCNodeErrorsLdrSpyd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14 |
adnUCNodeErrorsLdrSpydNoMemory OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.1 |
adnUCNodeErrorsLdrSpydInvVal OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.2 |
adnUCNodeErrorsLdrSpydFracInvVal OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.3 |
adnUCNodeErrorsLdrSpydFrac2 OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.4 |
adnUCNodeErrorsLdrSpydDownLoad OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.5 |
adnUCNodeErrorsLdrSpydNoCB OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.6 |
adnUCNodeErrorsLdrSpydifAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.7 |
adnUCNodeErrorsLdrSpydConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.8 |
adnUCNodeErrorsLdrSpydTransID OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.14.9 |
adnUCNodeErrorsMsup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16 |
adnUCNodeErrorsMsupInconsTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.1 |
adnUCNodeErrorsMsupInconsIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.2 |
adnUCNodeErrorsMsupMissingObject OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.3 |
adnUCNodeErrorsMsupBoardCrash OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.4 |
adnUCNodeErrorsMsupCu1NotConf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.6 |
adnUCNodeErrorsMsupCu2NotConf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.7 |
adnUCNodeErrorsMsupCuInWrongSlot OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.8 |
adnUCNodeErrorsMsupNotCuSlot OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.9 |
adnUCNodeErrorsMsupSoftwareError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.10 |
adnUCNodeErrorsMsupCuNotSuspend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.11 |
adnUCNodeErrorsMsupActionAlreadyProgress OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.12 |
adnUCNodeErrorsMsupVersionChangeProgress OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.13 |
adnUCNodeErrorsMsupInconsCuTypes OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.14 |
adnUCNodeErrorsMsupWrongCu1Type OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.15 |
adnUCNodeErrorsMsupWrongCu2Type OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.16 |
adnUCNodeErrorsMsupWrongCu1ApplType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.17 |
adnUCNodeErrorsMsupWrongCu2ApplType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.18 |
adnUCNodeErrorsMsupWrongSyncConf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.19 |
adnUCNodeErrorsMsupCuForbidSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.20 |
adnUCNodeErrorsMsupInconsState OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.141 |
adnUCNodeErrorsMsupCUModif OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.142 |
adnUCNodeErrorsMsupWrongAppl OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.143 |
adnUCNodeErrorsMsupWrongRedunRole OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.145 |
adnUCNodeErrorsMsupWrongRedunOptions OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.146 |
adnUCNodeErrorsMsupWrongServInd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.151 |
adnUCNodeErrorsMsupWrongAseConf OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.152 |
adnUCNodeErrorsMsupProcCreation OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.155 |
adnUCNodeErrorsMsupISLBlock OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.156 |
adnUCNodeErrorsMsupISLUnblock OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.157 |
adnUCNodeErrorsMsupISLReset OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.158 |
adnUCNodeErrorsMsupSLLReq OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.16.159 |
adnUCNodeErrorsAtmsup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17 |
adnUCNodeErrorsAtmsupIncTranId OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.1 |
adnUCNodeErrorsAtmsupIncTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.2 |
adnUCNodeErrorsAtmsupIncIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.3 |
adnUCNodeErrorsAtmsupSta OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.6 |
adnUCNodeErrorsAtmsupDM OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.8 |
adnUCNodeErrorsAtmsupValue OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.17.11 |
adnUCNodeErrorsAtmline OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18 |
adnUCNodeErrorsAtmlineIncTranId OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.1 |
adnUCNodeErrorsAtmlineIncTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.2 |
adnUCNodeErrorsAtmlineNotUpdPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.12 |
adnUCNodeErrorsAtmlineIncParVal OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.13 |
adnUCNodeErrorsAtmlineMissingPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.14 |
adnUCNodeErrorsAtmlineBoardNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.20 |
adnUCNodeErrorsAtmlineLineAlCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.21 |
adnUCNodeErrorsAtmlineIncBoardType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.22 |
adnUCNodeErrorsAtmlineSpareBoard OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.23 |
adnUCNodeErrorsAtmlineLineNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.24 |
adnUCNodeErrorsAtmlineTimNotSup OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.25 |
adnUCNodeErrorsAtmlineTimNcpLoop OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.26 |
adnUCNodeErrorsAtmlineIncApplType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.27 |
adnUCNodeErrorsAtmlineIfTabNotDel OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.30 |
adnUCNodeErrorsAtmlineNotCigPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.100 |
adnUCNodeErrorsAtmlineNotAtmTcPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.110 |
adnUCNodeErrorsAtmlineNoLowIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.111 |
adnUCNodeErrorsAtmlineNoAtmIfap OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.112 |
adnUCNodeErrorsAtmlineNotDs3E3Par OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.120 |
adnUCNodeErrorsAtmlineNotT1E1Par OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.130 |
adnUCNodeErrorsAtmlineNotSonetPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.140 |
adnUCNodeErrorsAtmlineNotRs232Par OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.150 |
adnUCNodeErrorsAtmlineInOutSpeed OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.18.151 |
adnUCNodeErrorsAafd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19 |
adnUCNodeErrorsAafdMissingNominator OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.1 |
adnUCNodeErrorsAafdMibError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.2 |
adnUCNodeErrorsAafdFmtError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.3 |
adnUCNodeErrorsAafdConfig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.4 |
adnUCNodeErrorsAafdInconsTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.5 |
adnUCNodeErrorsAafdTimerFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.6 |
adnUCNodeErrorsAafdCtxFail OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.7 |
adnUCNodeErrorsAafdACI2TFull OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.8 |
adnUCNodeErrorsAafdInconsState OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.9 |
adnUCNodeErrorsAafdDoneError OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.19.10 |
adnUCNodeErrorsPmd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20 |
adnUCNodeErrorsPmdInconsTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20.1 |
adnUCNodeErrorsPmdInconsIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20.2 |
adnUCNodeErrorsPmdDatagramSend OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20.6 |
adnUCNodeErrorsPmdConvIndex OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20.32 |
adnUCNodeErrorsPmdMaxDefer OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.20.35 |
adnUCNodeErrorsAsig OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21 |
adnUCNodeErrorsAsigObjectMaxNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.1 |
adnUCNodeErrorsAsigVpiVccMaxNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.2 |
adnUCNodeErrorsAsigNoBandwith OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.3 |
adnUCNodeErrorsAsigMaxVccNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.4 |
adnUCNodeErrorsAsigMaxVpcNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.5 |
adnUCNodeErrorsAsigCDVTooLarge OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.6 |
adnUCNodeErrorsAsigAddrMaxNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.7 |
adnUCNodeErrorsAsigNMSRequest OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.101 |
adnUCNodeErrorsAsigSoftware OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.102 |
adnUCNodeErrorsAsigNoMemory OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.21.103 |
adnUCNodeErrorsAtmces OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26 |
adnUCNodeErrorsAtmcesIncTranId OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.1 |
adnUCNodeErrorsAtmcesIncTranType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.2 |
adnUCNodeErrorsAtmcesOtherTran OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.3 |
adnUCNodeErrorsAtmcesDelReason OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.4 |
adnUCNodeErrorsAtmcesNotUpdPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.12 |
adnUCNodeErrorsAtmcesIncParVal OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.13 |
adnUCNodeErrorsAtmcesMissingPar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.14 |
adnUCNodeErrorsAtmcesNotLinePar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.100 |
adnUCNodeErrorsAtmcesBadTsNb OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.101 |
adnUCNodeErrorsAtmcesLineNotCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.102 |
adnUCNodeErrorsAtmcesBadLineType OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.103 |
adnUCNodeErrorsAtmcesAlrUnstr OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.104 |
adnUCNodeErrorsAtmcesBundleNtCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.106 |
adnUCNodeErrorsAtmcesOtherLine OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.107 |
adnUCNodeErrorsAtmcesBundleNtFnd OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.108 |
adnUCNodeErrorsAtmcesNtBundlePar OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.110 |
adnUCNodeErrorsAtmcesBundleEmpty OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.111 |
adnUCNodeErrorsAtmcesBadChassis OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.112 |
adnUCNodeErrorsAtmcesBadSlot OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.113 |
adnUCNodeErrorsAtmcesBadLine OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.114 |
adnUCNodeErrorsAtmcesBadChannel OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.115 |
adnUCNodeErrorsAtmcesBundleNtDel OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.116 |
adnUCNodeErrorsAtmcesBundleNtEmp OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.117 |
adnUCNodeErrorsAtmcesCnxNotDel OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.118 |
adnUCNodeErrorsAtmcesNoLineCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.121 |
adnUCNodeErrorsAtmcesAlrStruct OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.122 |
adnUCNodeErrorsAtmcesNoBundleCre OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.123 |
adnUCNodeErrorsAtmcesOtherAtmCnx OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.9.1.26.124 |
adnRoutingCriteria OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.10 |
adnRtsCritHopNulNul OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.10.1 |
adnRtsCritDlyMnyHop OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.10.2 |
adnRtsCritMnyDlyHop OBJECT IDENTIFIER .1.3.6.1.4.1.637.3.1.10.3 |