APS-MIB
Updated May 8, 2002AI MIB Summary
The APS-MIB module enables the monitoring and configuration of SONET linear Automatic Protection Switching (APS) groups, specifically tracking Multiplex Section Protection (MSP) states, switch events, and protection group status to ensure transport redundancy. This implementation aligns with GR-253-CORE and ITU-T G.783 standards to manage failover mechanisms within synchronous optical network infrastructure.
This management information module supports the configuration and management of SONET linear APS groups. The definitions and descriptions used in this MIB have been derived from Synchronous Optical Network (SONET) Transport Systems: Common Generic Criteria, GR-253-CORE Issue 3, September 2000, section 5.3. The MIB is also consistent with the Multiplex Section Protection (MSP) protocol as specified in ITU-T Recommendation G.783, Characteristics of synchronous digital hierarchy (SDH) equipment function blocks, Annex A and B.
Main OID:
apsMIB.1.3.6.1.4.1.2636.3.24
66
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
66 total| Object Name |
|---|
apsMIBThis management information module supports the configuration
and management of SONET linear APS groups. The definitions and
descriptions used in this MIB have been derived from
Synchronous Optical Network (SONET) Transport Systems:
Common Generic Criteria, GR-253-CORE Issue 3, September 2000,
section 5.3. The MIB is also consistent with the Multiplex
Section Protection (MSP) protocol as specified in ITU-T
Recommendation G.783, Characteristics of synchronous digital
hierarchy (SDH) equipment function blocks, Annex A and B. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.24 |
apsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.1 |
apsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.1.1 |
apsConfigGroupsThe count of APS groups. This count includes all rows in
apsConfigTable, regardless of the value of apsConfigRowStatus.ro Gauge32 .1.3.6.1.4.1.2636.3.24.1.1.1 |
apsConfigTableThis table lists the APS groups that have been configured
on the system. SEQUENCE OF ApsConfigEntry .1.3.6.1.4.1.2636.3.24.1.1.2 |
apsConfigEntryA conceptual row in the apsConfigTable. ApsConfigEntry .1.3.6.1.4.1.2636.3.24.1.1.2.1 |
apsConfigNameA textual name for the APS group. SnmpAdminString .1.3.6.1.4.1.2636.3.24.1.1.2.1.1 |
apsConfigRowStatusThe status of this APS group entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value. Also,
all associated apsChanConfigEntry rows must represent
a set of consecutive channel numbers beginning with
0 or 1, depending on the selected architecture.
When set to notInService changes may be made to apsConfigMode,
apsConfigRevert, apsConfigDirection, apsConfigExtraTraffic,
apsConfigSdBerThreshold, apsConfigSfBerThreshold,
and apsConfigWaitToRestore. Also, associated apsChanConfigTable
objects may be added, deleted and modified.ro RowStatus -- .1.3.6.1.4.1.2636.3.24.1.1.2.1.2 |
apsConfigModeThe architecture of the APS group.
onePlusOne
The 1+1 architecture permanently bridges the working
line to the protection line.
oneToN
The 1:n architecture allows one protection channel to
protect up to n working channels. When a fault is detected
on one of the n working channels that channel is bridged
over the protection channel.
onePlusOneCompatible
This refers to 1 + 1 bidirectional switching compatible with
1:n bidirectional switching as specified in ITU-T
Recommendation G.783 (04/97) section A.3.4.1. Since this
mode necessitates bidirectional switching, apsConfigDirection
must be set to bidirectional whenever onePlusOneCompatible is set.
onePlusOneOptimized
This refers to 1 + 1 bidirectional switching optimized
for a network using predominantly 1 + 1 bidirectional
switching as specified in ITU-T Recommendation G.783 (04/97)
section B.1. Since this mode necessitates bidirectional
switching, apsConfigDirection must be set to bidirectional
whenever onePlusOneOptimized is set.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Enumeration .1.3.6.1.4.1.2636.3.24.1.1.2.1.3 |
apsConfigRevertThe revertive mode of the APS group.
nonrevertive
Traffic remains on the protection line until another switch
request is received.
revertive
When the condition that caused a switch to the protection
line has been cleared the signal is switched back to the
working line. Since switching is revertive with the 1:n
architecture, apsConfigRevert must be set to revertive if
apsConfigMode is set to oneToN.
Switching may optionally be revertive with the 1+1 architecture.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Enumeration .1.3.6.1.4.1.2636.3.24.1.1.2.1.4 |
apsConfigDirectionThe directional mode of the APS group.
unidirectional
The unidirectional mode provides protection in one direction.
bidirectional
The bidirectional mode provides protection in both
directions.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Enumeration .1.3.6.1.4.1.2636.3.24.1.1.2.1.5 |
apsConfigExtraTrafficThis object enables or disables the transfer of extra traffic
on the protection channel in a 1:n architecture. This object
must be set to disabled if the architecture is 1+1. It may be
necessary to disable this in order to interwork with other SONET
network elements that don't support extra traffic.
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Enumeration .1.3.6.1.4.1.2636.3.24.1.1.2.1.6 |
apsConfigSdBerThresholdThe Signal Degrade Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). For example, a value of 5 indicates a BER threshold of
10^-5.
This object may be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Integer32 .1.3.6.1.4.1.2636.3.24.1.1.2.1.7 |
apsConfigSfBerThresholdThe Signal Failure Bit Error Rate.
The negated value of this number is used as the exponent of
10 for computing the threshold value for the Bit Error Rate
(BER). For example, a value of 5 indicates a BER threshold of
10^-5.
This object may be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Integer32 .1.3.6.1.4.1.2636.3.24.1.1.2.1.8 |
apsConfigWaitToRestoreThe Wait To Restore period in seconds.
After clearing of a condition that necessitated an
automatic switch, the wait to restore period must elapse
before reverting. This is intended to avoid rapid switch
oscillations.
GR-253-CORE specifies a Wait To Restore range of 5 to 12
minutes. G.783 defines a 5 to 12 minute Wait To Restore
range in section 5.4.1.1.3, but also allows for a shorter
WTR period in Table 2-1,
WaitToRestore value (MI_WTRtime: 0..(5)..12 minutes).
This object may not be modified if the associated
apsConfigRowStatus object is equal to active(1).ro Integer32 .1.3.6.1.4.1.2636.3.24.1.1.2.1.9 |
apsConfigCreationTimeThe value of sysUpTime at the time the row was
createdro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.24.1.1.2.1.10 |
apsConfigStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.ro StorageType -- .1.3.6.1.4.1.2636.3.24.1.1.2.1.11 |
apsStatusTableThis table provides status information about APS groups that have
been configured on the system. SEQUENCE OF ApsStatusEntry .1.3.6.1.4.1.2636.3.24.1.2 |
apsStatusEntryA conceptual row in the apsStatusTable. ApsStatusEntry .1.3.6.1.4.1.2636.3.24.1.2.1 |
apsStatusK1K2RcvThe current value of the K1 and K2 bytes received on the
protection channel.ro ApsK1K2 .1.3.6.1.4.1.2636.3.24.1.2.1.1 |
apsStatusK1K2TransThe current value of the K1 and K2 bytes transmitted on the
protection channel.ro ApsK1K2 .1.3.6.1.4.1.2636.3.24.1.2.1.2 |
apsStatusCurrentThe current status of the APS group.
modeMismatch
Modes other than 1+1 unidirectional monitor protection line
K2 bit 5, which indicates the architecture and K2 bits
6-8, which indicate if the mode is unidirectional or
bidirectional. A conflict between the current local mode
and the received K2 mode information constitutes a
mode mismatch.
channelMismatch
This bit indicates a mismatch between the transmitted K1 channel
and the received K2 channel has been detected.
psbf
This bit indicates a Protection Switch Byte Failure (PSBF) is
in effect. This condition occurs when either an inconsistent
APS byte or an invalid code is detected. An inconsistent APS
byte occurs when no three consecutive K1 bytes of the last 12
successive frames are identical, starting with the last frame
containing a previously consistent byte. An invalid code occurs
when the incoming K1 byte contains an unused code or a code
irrelevant for the specific switching operation (e.g., Reverse
Request while no switching request is outstanding) in three
consecutive frames. An invalid code also occurs when the incoming
K1 byte contains an invalid channel number in three consecutive
frames.
feplf
Modes other than 1+1 unidirectional monitor the K1 byte
for Far-End Protection-Line failures. A Far-End
Protection-Line defect is declared based on receiving
SF on the protection line.
extraTraffic
This bit indicates whether extra traffic is currently being
accepted on the protection line.ro Bits .1.3.6.1.4.1.2636.3.24.1.2.1.3 |
apsStatusModeMismatchesA count of Mode Mismatch conditions.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.2.1.4 |
apsStatusChannelMismatchesA count of Channel Mismatch conditions.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.2.1.5 |
apsStatusPSBFsA count of Protection Switch Byte Failure conditions.
This condition occurs when either an inconsistent APS
byte or an invalid code is detected. An inconsistent APS
byte occurs when no three consecutive K1 bytes of the last
12 successive frames are identical, starting with the last
frame containing a previously consistent byte. An invalid
code occurs when the incoming K1 byte contains an unused
code or a code irrelevant for the specific switching operation
(e.g., Reverse Request while no switching request is outstanding)
in three consecutive frames. An invalid code also occurs
when the incoming K1 byte contains an invalid channel number
in three consecutive frames.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.2.1.6 |
apsStatusFEPLFsA count of Far-End Protection-Line Failure conditions.
This condition is declared based on receiving SF on
the protection line in the K1 byte.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.2.1.7 |
apsStatusSwitchedChannelThis field is set to the number of the channel that is currently
switched to protection. The value 0 indicates no channel is
switched to protection. The values 1-14 indicate that working
channel is switched to protection.ro Integer32 .1.3.6.1.4.1.2636.3.24.1.2.1.8 |
apsStatusDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which
any one or more of this APS group's counters suffered a
discontinuity. The relevant counters are the specific
instances associated with this APS group of any Counter32
object contained in apsStatusTable. If no such
discontinuities have occurred since the last re-initialization
of the local management subsystem, then this object contains
a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.24.1.2.1.9 |
apsMap OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.1.3 |
apsChanLTEsThe count of SONET LTE interfaces on the system.
Each interface that is included has an ifType value of sonet(39).ro Gauge32 .1.3.6.1.4.1.2636.3.24.1.3.1 |
apsMapTableThis table lists the SONET LTE interfaces on the system.
Each interface that is listed has an ifType value of sonet(39). SEQUENCE OF ApsMapEntry .1.3.6.1.4.1.2636.3.24.1.3.2 |
apsMapEntryA conceptual row in the apsMapTable. ApsMapEntry .1.3.6.1.4.1.2636.3.24.1.3.2.1 |
apsMapGroupNameA textual name for the APS group which this channel is
included in. If the channel is not part of an APS group
this value is set to a string of size 0.
When an instance of apsChanConfigIfIndex is set equal to an
instance of ifIndex that has an ifType value of sonet(39),
apsMapGroupName is set equal to the corresponding value of
apsChanConfigGroupName.
If an instance of ifIndex that has an ifType value of sonet(39)
ceases to be equal to an instance of apsChanConfigIfIndex, either
because of a change in the value of apsChanConfigIfIndex, or
because of row deletion in the ApsChanConfigTable, apsMapGroupName
is set to a string of size 0.ro SnmpAdminString .1.3.6.1.4.1.2636.3.24.1.3.2.1.2 |
apsMapChanNumberThis field is set to a unique channel number within an APS group.
The value 0 indicates the null channel. The values 1-14 define a
working channel. If the SONET LTE is not part of an APS group this
value is set to -1.
When an instance of apsChanConfigIfIndex is set equal to an
instance of ifIndex that has an ifType value of sonet(39),
apsMapChanNumber is set equal to the corresponding value of
apsChanConfigNumber.
If an instance of ifIndex that has an ifType value of sonet(39)
ceases to be equal to an instance of apsChanConfigIfIndex, either
because of a change in the value of apsChanConfigIfIndex, or
because of row deletion in the ApsChanConfigTable,
apsMapChanNumber is set to -1.ro Integer32 (-1..14) .1.3.6.1.4.1.2636.3.24.1.3.2.1.3 |
apsChanConfigTableThis table lists the APS channels that have been configured
in APS groups. SEQUENCE OF ApsChanConfigEntry .1.3.6.1.4.1.2636.3.24.1.4 |
apsChanConfigEntryA conceptual row in the apsChanConfigTable. ApsChanConfigEntry .1.3.6.1.4.1.2636.3.24.1.4.1 |
apsChanConfigGroupNameA textual name for the APS group which this channel is
included in. SnmpAdminString .1.3.6.1.4.1.2636.3.24.1.4.1.1 |
apsChanConfigNumberThis field is set to a unique channel number within an APS group.
The value 0 indicates the null channel. The values 1-14 define a
working channel.
This field must be assigned a unique number within the group. Integer32 .1.3.6.1.4.1.2636.3.24.1.4.1.2 |
apsChanConfigRowStatusThe status of this APS channel entry.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
A row in the apsChanConfigTable may not be created,
deleted, set to notInService or otherwise modified
if the apsChanConfigGroupName value is equal to an
apsConfigName value and the associated apsConfigRowStatus
object is equal to active. However, if the apsConfigRowStatus
object is equal to notInService, a row may be created, deleted
or modified. In other words, a channel may not be added, deleted
or modified if the group is active.
A row may be created with an apsChanConfigGroupName value
that is not equal to any existing instance of apsConfigName.
This action is the initial step in adding a SONET LTE to a
new APS group.
If this object is set to destroy, the associated instance
of apsMapGroupName will be set to a string of size 0 and
the apsMapChanNumber will be set to -1. The channel status
entry will also be deleted by this action.
apsChanConfigNumber must be set to a unique channel number within
the APS group. The value 0 indicates the null channel.
The values 1-14 define a working channel. When an attempt is
made to set the corresponding apsConfigRowStatus field to
active the apsChanConfigNumber values of all entries with equal
apsChanConfigGroupName fields must represent a set of consecutive
integer values beginning with 0 or 1, depending on the architecture
of the group, and ending with n, where n is greater than or
equal to 1 and less than or equal to 14. Otherwise, the error
inconsistentValue is returned to the apsConfigRowStatus
set attempt.ro RowStatus -- .1.3.6.1.4.1.2636.3.24.1.4.1.3 |
apsChanConfigIfIndexThe Interface Index assigned to a SONET LTE. This is an
interface with ifType sonet(39). The value of this object
must be unique among all instances of apsChanConfigIfIndex.
In other words, a particular SONET LTE can only be configured in
one APS group.
This object cannot be set if the apsChanConfigGroupName instance
associated with this row is equal to an instance of apsConfigName
and the corresponding apsConfigRowStatus object is set to active.
In other words this value cannot be changed if the APS group is
active. However, this value may be changed if the apsConfigRowStatus
value is equal to notInService.ro InterfaceIndex -- .1.3.6.1.4.1.2636.3.24.1.4.1.4 |
apsChanConfigPriorityThe priority of the channel.
This field deterimines whether high or low priority
SD and SF codes are used in K1 requests.
This field is only applicable if the channel is to be included in
a group using the 1:n architecture. It is not applicable if the
channel is to be included in a group using the 1+1 architecture,
and is ignored in that case.
This object cannot be set if the apsChanConfigGroupName instance
associated with this row is equal to an instance of apsConfigName
and the corresponding apsConfigRowStatus object is set to active.
In other words this value cannot be changed if the APS group is
active. However, this value may be changed if the
apsConfigRowStatus value is equal to notInService.ro Enumeration .1.3.6.1.4.1.2636.3.24.1.4.1.5 |
apsChanConfigStorageTypeThe storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row.ro StorageType -- .1.3.6.1.4.1.2636.3.24.1.4.1.6 |
apsCommandTableThis table allows commands to be sent to configured APS groups. SEQUENCE OF ApsCommandEntry .1.3.6.1.4.1.2636.3.24.1.5 |
apsCommandEntryA conceptual row in the apsCommandTable. This row exists only if
the associated apsConfigEntry is active. ApsCommandEntry .1.3.6.1.4.1.2636.3.24.1.5.1 |
apsCommandSwitchAllows the initiation of an APS switch command on the
APS group and channel specified by the index values.
When read this object returns the last command written
or noCmd if no command has been written to this
channel since initialization. The return of the last command
written does not imply that this command is currently in effect.
This request may have been preempted by a higher priority
local or remote request. In order to determine the
current state of the APS group it is necessary to read
the objects apsStatusK1K2Rcv and apsStatusK1K2Trans.
The value lockoutOfProtection should only be applied to the
protection line channel since that switch command prevents any of
the working channels from switching to the protection line.
Following the same logic, forcedSwitchProtectToWork and
manualSwitchProtectToWork should only be applied to the protection
line channel.
forcedSwitchWorkToProtect and manualSwitchWorkToProtect
should only be applied to a working channel.ro ApsSwitchCommand -- .1.3.6.1.4.1.2636.3.24.1.5.1.1 |
apsCommandControlAllows the initiation of an APS control command on the
APS group and channel specified by the index values.
When read this object returns the last command written or
noCmd if no command has been written to this channel since
initialization.
This object does not apply to the protection line.ro ApsControlCommand -- .1.3.6.1.4.1.2636.3.24.1.5.1.2 |
apsChanStatusTableThis table contains status information for all SONET LTE
interfaces that are included in APS groups. SEQUENCE OF ApsChanStatusEntry .1.3.6.1.4.1.2636.3.24.1.6 |
apsChanStatusEntryA conceptual row in the apsChanStatusTable. ApsChanStatusEntry .1.3.6.1.4.1.2636.3.24.1.6.1 |
apsChanStatusCurrentIndicates the current state of the port.
lockedOut
This bit, when applied to a working channel, indicates that
the channel is prevented from switching to the protection line.
When applied to the null channel, this bit indicates that no
working channel may switch to the protection line.
sd
A signal degrade condition is in effect.
sf
A signal failure condition is in effect.
switched
The switched bit is applied to a working channel if that
channel is currently switched to the protection line.
wtr
A Wait-to-Restore state is in effect.ro Bits .1.3.6.1.4.1.2636.3.24.1.6.1.1 |
apsChanStatusSignalDegradesA count of Signal Degrade conditions. This condition
occurs when the line Bit Error Rate exceeds the currently
configured value of the relevant instance of
apsConfigSdBerThreshold.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsChanStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.6.1.2 |
apsChanStatusSignalFailuresA count of Signal Failure conditions that have been
detected on the incoming signal. This condition occurs
when a loss of signal, loss of frame, AIS-L or a Line
bit error rate exceeding the currently configured value of
the relevant instance of apsConfigSfBerThreshold.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsChanStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.6.1.3 |
apsChanStatusSwitchoversWhen queried with index value apsChanConfigNumber other than 0,
this object will return the number of times this channel has
switched to the protection line.
When queried with index value apsChanConfigNumber set to 0,
which is the protection line, this object will return the
number of times that any working channel has been switched
back to the working line from this protection line.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsChanStatusDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.6.1.4 |
apsChanStatusLastSwitchoverWhen queried with index value apsChanConfigNumber other than 0,
this object will return the value of sysUpTime when this
channel last completed a switch to the protection line. If this
channel has never switched to the protection line, the value
0 will be returned.
When queried with index value apsChanConfigNumber set to 0,
which is the protection line, this object will return the
value of sysUpTime the last time that a working channel was
switched back to the working line from this protection line.
If no working channel has ever switched back to the working
line from this protection line, the value 0 will be returned.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.24.1.6.1.5 |
apsChanStatusSwitchoverSecondsThe cumulative Protection Switching Duration (PSD) time in
seconds. For a working channel, this is the cumulative number
of seconds that service was carried on the protection line.
For the protection line, this is the cumulative number of
seconds that the protection line has been used to carry any
working channel traffic. This information is only valid if
revertive switching is enabled. The value 0 will be returned
otherwise.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
apsChanStatusDiscontinuityTime. For example, if the value
of an instance of apsChanStatusSwitchoverSeconds changes
from a non-zero value to zero due to revertive switching
being disabled, it is expected that the corresponding
value of apsChanStatusDiscontinuityTime will be updated
to reflect the time of the configuration change.ro Counter32 .1.3.6.1.4.1.2636.3.24.1.6.1.6 |
apsChanStatusDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which
any one or more of this channel's counters suffered a
discontinuity. The relevant counters are the specific
instances associated with this channel of any Counter32
object contained in apsChanStatusTable. If no such
discontinuities have occurred since the last re-initialization
of the local management subsystem, then this object contains
a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2636.3.24.1.6.1.7 |
apsNotificationEnableProvides the ability to enable and disable notifications
defined in this MIB.
switchover
Indicates apsEventSwitchover notifications
should be generated.
modeMismatch
Indicates apsEventModeMismatch notifications
should be generated.
channelMismatch
Indicates apsEventChannelMismatch notifications
should be generated.
psbf
Indicates apsEventPSBF notifications
should be generated.
feplf
Indicates apsEventFEPLF notifications
should be generated.ro Bits .1.3.6.1.4.1.2636.3.24.1.7 |
apsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.2 |
apsNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.2.0 |
apsEventSwitchoverAn apsEventSwitchover notification is sent when the
value of an instance of apsChanStatusSwitchovers increments. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.24.2.0.1 |
apsEventModeMismatchAn apsEventModeMismatch notification is sent when the
value of an instance of apsStatusModeMismatches increments. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.24.2.0.2 |
apsEventChannelMismatchAn apsEventChannelMismatch notification is sent when the
value of an instance of apsStatusChannelMismatches increments. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.24.2.0.3 |
apsEventPSBFAn apsEventPSBF notification is sent when the
value of an instance of apsStatusPSBFs increments. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.24.2.0.4 |
apsEventFEPLFAn apsEventFEPLFs notification is sent when the
value of an instance of apsStatusFEPLFs increments. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.3.24.2.0.5 |
apsMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.3 |
apsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.3.1 |
apsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.24.3.2 |