JUNIPER-IFOPTICS-MIB
Updated Jun 24, 2024This MIB module defines objects used for managing the Optics interface for Juniper products.
Main OID:
jnxIfOpticsMib.1.3.6.1.4.1.2636.3.71.1
741
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
741 total| Object Name |
|---|
jnxIfOpticsMibThis MIB module defines objects used for managing the
Optics interface for Juniper products. MODULE-IDENTITY .1.3.6.1.4.1.2636.3.71.1 |
jnxOptics OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.1 |
jnxOpticsConfigTableInformation about the optics config Table. SEQUENCE OF JnxOpticsConfigEntry .1.3.6.1.4.1.2636.3.71.1.1.1 |
jnxOpticsConfigEntryA conceptual row that contains information about the optics
config Table. JnxOpticsConfigEntry .1.3.6.1.4.1.2636.3.71.1.1.1.1 |
jnxOpticsConfigContainerIndexThe associated jnxContentsContainerIndex - eg shelf.. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.1 |
jnxOpticsConfigL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.2 |
jnxOpticsConfigL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.3 |
jnxOpticsConfigL3IndexThe level three index associated with this subject.. eg port. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.4 |
jnxOpticsType0 - none
1 - SFP
2 - XFP
3 - SFP+
4 - XFP+
5 - CFP
6 - CFP+
7 - Non pluggable
8 - QSFP DWDM
9 - QSFP56DDro Integer32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.5 |
jnxLaserEnable0 - laser off
1 - laser onrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.6 |
jnxWavelengthThe transmit wavelength of the laser.rw Unsigned32 UNITS "0.01 nm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.7 |
jnxSpacingA minimum nominal difference in frequency (GHz) between two
adjacent channels.ro JnxOpticsChannelSpacing .1.3.6.1.4.1.2636.3.71.1.1.1.1.8 |
jnxModulationModulation
Unknown - (1),
NonPSK - (2),
ODB - (3),
DPSK - (4),
QPSK - (5),
DQPSK - (6),
DPQPSK - (7),
16QAM - (8),
64QAM - (9),
256QAM - (10)ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.1.1.1.9 |
jnxTxOpticalPowerTransmit optical power.rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.10 |
jnxRxOpticalPowerReceive optical power.ro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.11 |
jnxModuleTempHighThreshHigh module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .ro Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.1.1.1.12 |
jnxModuleTempLowThreshLow module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .ro Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.1.1.1.13 |
jnxTxPowerHighThreshTx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.14 |
jnxTxPowerLowThreshTx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.15 |
jnxRxPowerHighThreshRx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.16 |
jnxRxPowerLowThreshRx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.17 |
jnx24HourModuleTempHighThreshHigh module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .ro Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.1.1.1.18 |
jnx24HourModuleTempLowThreshLow module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .ro Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.1.1.1.19 |
jnx24HourTxPowerHighThreshTx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.20 |
jnx24HourTxPowerLowThreshTx for a 24 hour period Power below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.21 |
jnx24HourRxPowerHighThreshRx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.22 |
jnx24HourRxPowerLowThreshRx Power for a 24 hour period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.23 |
jnxRxLosPowerWarningThreshRx Power warning threshold for seeting the optical LOS
warning.rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.24 |
jnxRxLosPowerAlarmThreshRx Power alarm threshold for seeting the optical LOS
warning.rw Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.1.1.1.25 |
jnxOpticsCurrentStatusro Bits .1.3.6.1.4.1.2636.3.71.1.1.1.1.26 |
jnxTxPowerHighEnableTCAEnable/Disable for the Tx Power High TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.27 |
jnxTxPowerLowEnableTCAEnable/Disable for the Tx Power Low TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.28 |
jnxRxPowerHighEnableTCAEnable/Disable for the Rx Power High TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.29 |
jnxRxPowerLowEnableTCAEnable/Disable for the Rx Power Low TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.30 |
jnxModuleTempHighEnableTCAEnable/Disable for the Module Temp High TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.31 |
jnxModuleTempLowEnableTCAEnable/Disable for the Module Temp Low TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.32 |
jnxCarFreqOffsetHighEnableTCAEnable/Disable for the Carrier Frequency Offset High TCA.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.33 |
jnxCarFreqOffsetLowEnableTCAEnable/Disable for the CarrierFreqOffetLow TCA's.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.1.1.34 |
jnxCarFreqOffsetHighThreshCarrier frequency offset for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.1.1.1.35 |
jnx24HourCarFreqOffsetHighThreshCarrier frequency offset for a 24 Hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.1.1.1.36 |
jnxCarFreqOffsetLowThreshCarrier frequency offset for a 15 minute period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.1.1.1.37 |
jnx24HourCarFreqOffsetLowThreshCarrier frequency offset for a 24 Hour period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rw Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.1.1.1.38 |
jnxOpticsTraceToneCfgTableInformation about the optics tests. SEQUENCE OF JnxOpticsTraceToneCfgEntry .1.3.6.1.4.1.2636.3.71.1.1.2 |
jnxOpticsTraceToneCfgEntryInformation about the optics FRU's. JnxOpticsTraceToneCfgEntry .1.3.6.1.4.1.2636.3.71.1.1.2.1 |
jnxOpticsTraceToneCfgContainerIndexThe associated jnxContentsContainerIndex - eg shelf.. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.2.1.1 |
jnxOpticsTraceToneCfgL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.2.1.2 |
jnxOpticsTraceToneCfgL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.2.1.3 |
jnxOpticsTraceToneCfgL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.2.1.4 |
jnxOpticsTraceToneCfgTxEnableThis will enable/disable the transmit Trace tone feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.2.1.5 |
jnxOpticsTraceToneCfgRxEnableThis will enable/disable the receive Trace tone feature.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.2.1.6 |
jnxOpticsTraceToneCfgDestIdThis is the destination Id of the link
ID/ the chassis and the blade.
The transmit messages will also have the src id
which is this chassis id and this port info.rw OCTET STRING .1.3.6.1.4.1.2636.3.71.1.1.2.1.7 |
jnxOpticsTraceToneCfgTxMsgThis will be the transmit data in the tracetone message.rw OCTET STRING .1.3.6.1.4.1.2636.3.71.1.1.2.1.8 |
jnxOpticsTraceToneCfgRxMsgThis will be the receive data in the trace tone message.ro OCTET STRING .1.3.6.1.4.1.2636.3.71.1.1.2.1.9 |
jnxOpticsNotificationTrigDefaultHoldtimeUpThis object will indicate the time (ms) for the defect to
persist before it is declared an alarm.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.3 |
jnxOpticsNotificationTrigDefaultHoldtimeDownThis object will indicate the time (ms) for the defect to
absent before the alarm is cleared.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.4 |
jnxOpticsNotificationTrigTableInformation about the otn Alarm/Alart/Info trigger table. SEQUENCE OF JnxOpticsNotificationTrigEntry .1.3.6.1.4.1.2636.3.71.1.1.5 |
jnxOpticsNotificationTrigEntryA conceptual row that contains information about the Otn
Alarm Trigger Table. JnxOpticsNotificationTrigEntry .1.3.6.1.4.1.2636.3.71.1.1.5.1 |
jnxOpticsNotificationTrigContainerIndexThe associated jnxContentsContainerIndex - eg shelf. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.1 |
jnxOpticsNotificationTrigL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.2 |
jnxOpticsNotificationTrigL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.3 |
jnxOpticsNotificationTrigL3IndexThe level three index associated with this subject..
eg port. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.4 |
jnxOpticsNotificationTrigAlmIdThis will be the type of Alarm as defined by
JnxOpticsNotificationId JnxOpticsNotificationId .1.3.6.1.4.1.2636.3.71.1.1.5.1.5 |
jnxOpticsNotificationTrigSeverityThis will be the Severity of the Notification.rw JnxOpticsSeverity .1.3.6.1.4.1.2636.3.71.1.1.5.1.6 |
jnxOpticsNotificationTrigIgnoreThis object will ignore the alarm when set.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.5.1.7 |
jnxOpticsNotificationTrigHoldtimeUpThis object will indicate the time (ms) for the defect to
persist before it is declared an alarm.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.8 |
jnxOpticsNotificationTrigHoldtimeDownThis object will indicate the time (ms) the defect is
absent before the alarm is cleared.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.5.1.9 |
jnxOpticsTrigServiceStateActionThis will indicate whether this alarm is service affecting
or not .ro JnxOpticsServiceStateAction .1.3.6.1.4.1.2636.3.71.1.1.5.1.10 |
jnxOpticsClearAllPMsTo clear all optics Performance monitoring counters on all
interfaces.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.6 |
jnxOpticsClearIfPMsTableTo clear optics Performance monitoring counters on this
interfaces SEQUENCE OF JnxOpticsClearIfPMsEntry .1.3.6.1.4.1.2636.3.71.1.1.7 |
jnxOpticsClearIfPMsEntryA conceptual row that s used to clear the Optics PM Table. JnxOpticsClearIfPMsEntry .1.3.6.1.4.1.2636.3.71.1.1.7.1 |
jnxOpticsClearCurrent1- to clear all the Current Optics PM's for this interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.7.1.1 |
jnxOpticsClearInterfaceInterval1- to clear all the Optics PM's intervals(1-96) for this
interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.7.1.2 |
jnxOpticsClearInterfaceDay1 - to clear all the Current Day and Previous Day Optics PM's
for this interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.7.1.3 |
jnxOpticsClearInterfaceAll1 - to clear all the Optics PM's for this interfacerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.7.1.4 |
jnxOpticsOTIfConfigTableInformation about the OT interface optics config Table. SEQUENCE OF JnxOpticsOTIfConfigEntry .1.3.6.1.4.1.2636.3.71.1.1.8 |
jnxOpticsOTIfConfigEntryA conceptual row that contains information about the OT interface optics
config Table. JnxOpticsOTIfConfigEntry .1.3.6.1.4.1.2636.3.71.1.1.8.1 |
jnxOpticsOTIfConfigContainerIndexThe associated jnxContentsContainerIndex - eg shelf.. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.1 |
jnxOpticsOTIfConfigL1IndexThe level one index associated with this subject ... eg fpc
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.2 |
jnxOpticsOTIfConfigL2IndexThe level two index associated with this subject .. eg pic
slot. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.3 |
jnxOpticsOTIfConfigL3IndexThe level three index associated with this subject.. eg port. Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.4 |
jnxOpticsOTIfLaserEnable0 - laser off
1 - laser onrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.8.1.5 |
jnxOpticsOTIfFecModeThis parameter indicates what FEC type in the OTU framerw JnxOpticsOTIfFecType .1.3.6.1.4.1.2636.3.71.1.1.8.1.6 |
jnxOpticsOTIfEncodingOptionEncoding option selectedrw JnxOpticsOTIfEncodingOptions .1.3.6.1.4.1.2636.3.71.1.1.8.1.7 |
jnxOpticsOTIfModulationModulation formats supported on the platform
Unknown - (0),
16QAM - (1),
8QAM - (2),
QPSK - (3)rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.8 |
jnxOpticsOTIfAdminStateThe Admin state of this interfacerw JnxOpticsOTIfAdminStates .1.3.6.1.4.1.2636.3.71.1.1.8.1.9 |
jnxOpticsOTIfOperStateThe operational state of this interfacero JnxOpticsOTIfOperStates .1.3.6.1.4.1.2636.3.71.1.1.8.1.10 |
jnxOpticsOTIfHighPolarizationEnable/disable high-polarization mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.1.8.1.11 |
jnxOpticsOTIfPreFecBERThresholdMantissaThis will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.12 |
jnxOpticsOTIfPreFecBERThresholdExponentThis will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.13 |
jnxOpticsOTIfPreFecBERThresholdTimeSpecify the interval for which the BER must stay above
the signal degradation threshold or below the clear threshold
for the alarm to be raised or cleared respectively.rw Integer32 UNITS "ms" .1.3.6.1.4.1.2636.3.71.1.1.8.1.14 |
jnxOpticsOTIfPreFecBERThresholdClearMantissaThis will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold error count.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.15 |
jnxOpticsOTIfPreFecBERThresholdClearExponentThis will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
error count.rw Integer32 .1.3.6.1.4.1.2636.3.71.1.1.8.1.16 |
jnxOpticsPerformanceMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.2 |
jnxOpticsPMCurrentTableA table of current PM entries for coherent optics. SEQUENCE OF JnxOpticsPMCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.1 |
jnxOpticsPMCurrentEntryA conceptual row that contains information about the PM Current
Table. JnxOpticsPMCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.1.1 |
jnxPMCurChromaticDispersionChromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.1 |
jnxPMCurDiffGroupDelayDifferential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.1.1.2 |
jnxPMCurPolarizationStatePolarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.3 |
jnxPMCurPolarDepLossThe polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPsro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.4 |
jnxPMCurQ'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.5 |
jnxPMCurSNRSNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.6 |
jnxPMCurTxOutputPowerTxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.7 |
jnxPMCurRxInputPowerRxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.8 |
jnxPMCurMinChromaticDispersionMin Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.9 |
jnxPMCurMaxChromaticDispersionMax Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.10 |
jnxPMCurAvgChromaticDispersionAverage Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.11 |
jnxPMCurMinDiffGroupDelayMin Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.1.1.12 |
jnxPMCurMaxDiffGroupDelayMax Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.1.1.13 |
jnxPMCurAvgDiffGroupDelayAverage Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.1.1.14 |
jnxPMCurMinPolarStateMin Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.15 |
jnxPMCurMaxPolarStateMax Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.16 |
jnxPMCurAvgPolarStateAvg Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.17 |
jnxPMCurMinPolarDepLossMin - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.18 |
jnxPMCurMaxPolarDepLossMax - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.19 |
jnxPMCurAvgPolarDepLossAvg - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.20 |
jnxPMCurMinQMin 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.21 |
jnxPMCurMaxQMax 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.22 |
jnxPMCurAvgQAvg 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.23 |
jnxPMCurMinSNRMin SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.24 |
jnxPMCurMaxSNRMax SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.25 |
jnxPMCurAvgSNRAvg SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.26 |
jnxPMCurMinTxOutputPowerMin TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.27 |
jnxPMCurMaxTxOutputPowerMax TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.28 |
jnxPMCurAvgTxOutputPowerAvg TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.29 |
jnxPMCurMinRxInputPowerMin RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.30 |
jnxPMCurMaxRxInputPowerMax RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.31 |
jnxPMCurAvgRxInputPowerAvg RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.32 |
jnxPMCurSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.1.1.33 |
jnxPMCurSuspectReasonIf jnxPMCurSuspectedFlag is true, provides the reason.ro JnxOpticsSuspectReason .1.3.6.1.4.1.2636.3.71.1.2.1.1.34 |
jnxPMCurTxLaserBiasCurrentTrasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.35 |
jnxPMCurMinTxLaserBiasCurrentMinimum trasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.36 |
jnxPMCurMaxTxLaserBiasCurrentMaximum trasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.37 |
jnxPMCurAvgTxLaserBiasCurrentAverage LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.38 |
jnxPMCurTemperatureModule Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.1.1.39 |
jnxPMCurMinTemperatureMinimum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.1.1.40 |
jnxPMCurMaxTemperatureMaximum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.1.1.41 |
jnxPMCurAvgTemperatureAverage Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.1.1.42 |
jnxPMCurCarFreqOffsetCarrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.43 |
jnxPMCurMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.44 |
jnxPMCurMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.45 |
jnxPMCurAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.46 |
jnxPMCurRxLaserBiasCurrentReceived LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.47 |
jnxPMCurMinRxLaserBiasCurrentReceived Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.48 |
jnxPMCurMaxRxLaserBiasCurrentReceived Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.49 |
jnxPMCurAvgRxLaserBiasCurrentReceived Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.50 |
jnxPMCurTecCurrentReceived TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.51 |
jnxPMCurMinTecCurrentReceived Minimum TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.52 |
jnxPMCurMaxTecCurrentReceived Maximum TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.53 |
jnxPMCurAvgTecCurrentReceived Average TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.1.1.54 |
jnxPMCurResidualDispersionResidual Dispersion measured at Transceiver
portro Integer32 UNITS ".1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.55 |
jnxPMCurMinResidualDispersionMinimum Residual Dispersion measured at Transceiver
portro Integer32 UNITS ".1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.56 |
jnxPMCurMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
portro Integer32 UNITS ".1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.57 |
jnxPMCurAvgResidualDispersionAverage Residual Dispersion measured at Transceiver
portro Integer32 UNITS ".1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.58 |
jnxPMCurLevelHistogramThe rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.59 |
jnxPMCurMinLevelHistogramThe Minimum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.60 |
jnxPMCurMaxLevelHistogramThe Maximum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.61 |
jnxPMCurAvgLevelHistogramThe Average rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.62 |
jnxPMCurLaserFrequencyErrorLaser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.63 |
jnxPMCurMinLaserFrequencyErrorMinimum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.64 |
jnxPMCurMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.65 |
jnxPMCurAvgLaserFrequencyErrorAverage Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.1.1.66 |
jnxPMCurFECCorrectedErrorsMantissaPre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.67 |
jnxPMCurFECCorrectedErrorsExponentPre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.68 |
jnxPMCurMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.69 |
jnxPMCurMinFECCorrectedErrorsExponentMinimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.70 |
jnxPMCurMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.71 |
jnxPMCurMaxFECCorrectedErrorsExponentMaximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.72 |
jnxPMCurAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.73 |
jnxPMCurAvgFECCorrectedErrorsExponentAverage Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.74 |
jnxPMCurFECUCorrectedWordsMantissaUncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.75 |
jnxPMCurFECUCorrectedWordsExponentUncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.76 |
jnxPMCurMinFECUCorrectedWordsMantissaMinimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.77 |
jnxPMCurMinFECUCorrectedWordsExponentMinimum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.78 |
jnxPMCurMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.79 |
jnxPMCurMaxFECUCorrectedWordsExponentMaximum Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.80 |
jnxPMCurAvgFECUCorrectedWordsMantissaAverage Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.81 |
jnxPMCurAvgFECUCorrectedWordsExponentAverage Uncorrected BER - provides the negetive exponent value for Uncorrected BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.1.1.82 |
jnxPMCurRxSignalPowerRxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.83 |
jnxPMCurMinRxSignalPowerMin RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.84 |
jnxPMCurMaxRxSignalPowerMax RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.85 |
jnxPMCurAvgRxSignalPowerAvg RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.1.1.86 |
jnxPMCurOSNROSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.87 |
jnxPMCurMinOSNRMin OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.88 |
jnxPMCurMaxOSNRMax OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.89 |
jnxPMCurAvgOSNRAvg OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.1.1.90 |
jnxPMCurSOPMDSOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.1.1.91 |
jnxPMCurMinSOPMDMin SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.1.1.92 |
jnxPMCurMaxSOPMDMax SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.1.1.93 |
jnxPMCurAvgSOPMDAvg SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.1.1.94 |
jnxPMCurSupplyVoltageSupply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.1.1.95 |
jnxPMCurMinSupplyVoltageMinimum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.1.1.96 |
jnxPMCurMaxSupplyVoltageMaximum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.1.1.97 |
jnxPMCurAvgSupplyVoltageAverage Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.1.1.98 |
jnxPMCurSOPROCSOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.99 |
jnxPMCurMinSOPROCMinimum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.100 |
jnxPMCurMaxSOPROCMaximum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.101 |
jnxPMCurAvgSOPROCAverage SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.1.1.102 |
jnxPMCurModulatorBiasXIModulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.103 |
jnxPMCurMinModulatorBiasXIMinimum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.104 |
jnxPMCurMaxModulatorBiasXIMaximum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.105 |
jnxPMCurAvgModulatorBiasXIAverage Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.106 |
jnxPMCurModulatorBiasXQModulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.107 |
jnxPMCurMinModulatorBiasXQMinimum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.108 |
jnxPMCurMaxModulatorBiasXQMaximum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.109 |
jnxPMCurAvgModulatorBiasXQAverage Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.110 |
jnxPMCurModulatorBiasYIModulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.111 |
jnxPMCurMinModulatorBiasYIMinimum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.112 |
jnxPMCurMaxModulatorBiasYIMaximum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.113 |
jnxPMCurAvgModulatorBiasYIAverage Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.114 |
jnxPMCurModulatorBiasYQModulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.115 |
jnxPMCurMinModulatorBiasYQMinimum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.116 |
jnxPMCurMaxModulatorBiasYQMaximum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.117 |
jnxPMCurAvgModulatorBiasYQAverage Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.118 |
jnxPMCurModulatorBiasXPhaseModulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.119 |
jnxPMCurMinModulatorBiasXPhaseMinimum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.120 |
jnxPMCurMaxModulatorBiasXPhaseMaximum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.121 |
jnxPMCurAvgModulatorBiasXPhaseAverage Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.122 |
jnxPMCurModulatorBiasYPhaseModulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.123 |
jnxPMCurMinModulatorBiasYPhaseMinimum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.124 |
jnxPMCurMaxModulatorBiasYPhaseMaximum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.125 |
jnxPMCurAvgModulatorBiasYPhaseAverage Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.1.1.126 |
jnxPMCurQMarginQ Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.1.1.127 |
jnxPMCurMinQMarginMinimum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.1.1.128 |
jnxPMCurMaxQMarginMaximum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.1.1.129 |
jnxPMCurAvgQMarginAverage Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.1.1.130 |
jnxOpticsPMIntervalTableA table of interval PM entries for coherent optics. SEQUENCE OF JnxOpticsPMIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.2 |
jnxOpticsPMIntervalEntryA conceptual row that contains information about the PM Interval
Table. JnxOpticsPMIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.2.1 |
jnxOpticsPMIntervalNumberThis is the 15 mintute interval number. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.1 |
jnxPMIntMinChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - min in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.2 |
jnxPMIntMaxChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - max in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.3 |
jnxPMIntAvgChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - average in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.4 |
jnxPMIntMinDiffGroupDelayDifferential group delay measured at Rx Transceiver
port
::= { jnxOpticsPMIntervalEntry 5 }
jnxPMIntMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.2.1.6 |
jnxPMIntAvgDiffGroupDelayDifferential group delay measured at Rx Transceiver
port
::= { jnxOpticsPMIntervalEntry 7 }
jnxPMIntMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.2.1.8 |
jnxPMIntMaxPolarStatePolarization state
::= { jnxOpticsPMIntervalEntry 9 }
jnxPMIntAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.2.1.10 |
jnxPMIntMinPolarDependentLossPolarization Dependent Loss
::= { jnxOpticsPMIntervalEntry 11 }
jnxPMIntMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.12 |
jnxPMIntAvgPolarDependentLossPolarization Dependent Loss
intervalro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.13 |
jnxPMIntMinQQ
::= { jnxOpticsPMIntervalEntry 14 }
jnxPMIntMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.15 |
jnxPMIntAvgQQ
::= { jnxOpticsPMIntervalEntry 16 }
jnxPMIntMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.17 |
jnxPMIntMaxSNRSNR
::= { jnxOpticsPMIntervalEntry 18 }
jnxPMIntAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.19 |
jnxPMIntMinTxOutputPowerTxOutputPower
::= { jnxOpticsPMIntervalEntry 20 }
jnxPMIntMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.21 |
jnxPMIntAvgTxOutputPowerTxOutputPower
::= { jnxOpticsPMIntervalEntry 22 }
jnxPMIntMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.23 |
jnxPMIntMaxRxInputPowerRxInputPower
::= { jnxOpticsPMIntervalEntry 24 }
jnxPMIntAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.25 |
jnxPMIntTimeStampTime stamp PM intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.2.1.26 |
jnxPMIntSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.2.1.27 |
jnxPMIntSuspectReasonIf jnxPMIntSuspectedFlag is true, provides the reason.ro JnxOpticsSuspectReason .1.3.6.1.4.1.2636.3.71.1.2.2.1.28 |
jnxPMIntMinTxLaserBiasCurrentTransmit Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.29 |
jnxPMIntMaxTxLaserBiasCurrentTransmit Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.30 |
jnxPMIntAvgTxLaserBiasCurrentTransmit Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.31 |
jnxPMIntMinTemperatureMinimum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.2.1.32 |
jnxPMIntMaxTemperatureMaximum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.2.1.33 |
jnxPMIntAvgTemperatureAverage Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.2.1.34 |
jnxPMIntMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "Mhz" .1.3.6.1.4.1.2636.3.71.1.2.2.1.35 |
jnxPMIntMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.2.1.36 |
jnxPMIntAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.2.1.37 |
jnxPMIntMinRxLaserBiasCurrentReceive Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.38 |
jnxPMIntMaxRxLaserBiasCurrentReceive Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.39 |
jnxPMIntAvgRxLaserBiasCurrentReceive Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.40 |
jnxPMIntMinTecCurrentReceived Minimum TecCurrent measured at Transceiver
port
::= { jnxOpticsPMIntervalEntry 41 }
jnxPMIntMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.42 |
jnxPMIntAvgTecCurrentReceived Average TecCurrent measured at Transceiver
port
::= { jnxOpticsPMIntervalEntry 43 }
jnxPMIntMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.2.1.44 |
jnxPMIntMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
port
::= { jnxOpticsPMIntervalEntry 45 }
jnxPMIntAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.46 |
jnxPMIntMinLevelHistogramThe Minimum rate of measured signal at Transceiver
port
::= { jnxOpticsPMIntervalEntry 47 }
jnxPMIntMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.48 |
jnxPMIntAvgLevelHistogramThe Average rate of measured signal at Transceiver
port
::= { jnxOpticsPMIntervalEntry 49 }
jnxPMIntMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.50 |
jnxPMIntMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver
port
::= { jnxOpticsPMIntervalEntry 51 }
jnxPMIntAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.2.1.52 |
jnxPMIntMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 53 }
jnxPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.54 |
jnxPMIntMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 55 }
jnxPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.56 |
jnxPMIntAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 57 }
jnxPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.58 |
jnxPMIntMinFECUCorrectedWordsMantissaMinimum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 59 }
jnxPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.60 |
jnxPMIntMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 61 }
jnxPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.62 |
jnxPMIntAvgFECUCorrectedWordsMantissaAverage Uncorrected BER - provides the mantissa value for Uncorrected BER expressed in scientific notation
::= { jnxOpticsPMIntervalEntry 63 }
jnxPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.2.1.64 |
jnxPMIntMinRxSignalPowerMin RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.65 |
jnxPMIntMaxRxSignalPowerMax RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.66 |
jnxPMIntAvgRxSignalPowerAvg RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.2.1.67 |
jnxPMIntMinOSNRMin OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.68 |
jnxPMIntMaxOSNRMax OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.69 |
jnxPMIntAvgOSNRAvg OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.2.1.70 |
jnxPMIntMinSOPMDMin SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.2.1.71 |
jnxPMIntMaxSOPMDMax SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.2.1.72 |
jnxPMIntAvgSOPMDAvg SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.2.1.73 |
jnxPMIntMinSupplyVoltageMinimum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.2.1.74 |
jnxPMIntMaxSupplyVoltageMaximum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.2.1.75 |
jnxPMIntAvgSupplyVoltageAverage Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.2.1.76 |
jnxPMIntMinSOPROCMinimum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.2.1.77 |
jnxPMIntMaxSOPROCMaximum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.2.1.78 |
jnxPMIntAvgSOPROCAverage SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.2.1.79 |
jnxPMIntMinModulatorBiasXIMinimum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.80 |
jnxPMIntMaxModulatorBiasXIMaximum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.81 |
jnxPMIntAvgModulatorBiasXIAverage Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.82 |
jnxPMIntMinModulatorBiasXQMinimum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.83 |
jnxPMIntMaxModulatorBiasXQMaximum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.84 |
jnxPMIntAvgModulatorBiasXQAverage Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.85 |
jnxPMIntMinModulatorBiasYIMinimum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.86 |
jnxPMIntMaxModulatorBiasYIMaximum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.87 |
jnxPMIntAvgModulatorBiasYIAverage Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.88 |
jnxPMIntMinModulatorBiasYQMinimum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.89 |
jnxPMIntMaxModulatorBiasYQMaximum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.90 |
jnxPMIntAvgModulatorBiasYQAverage Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.91 |
jnxPMIntMinModulatorBiasXPhaseMinimum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.92 |
jnxPMIntMaxModulatorBiasXPhaseMaximum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.93 |
jnxPMIntAvgModulatorBiasXPhaseAverage Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.94 |
jnxPMIntMinModulatorBiasYPhaseMinimum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.95 |
jnxPMIntMaxModulatorBiasYPhaseMaximum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.96 |
jnxPMIntAvgModulatorBiasYPhaseAverage Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.2.1.97 |
jnxPMIntMinQMarginMinimum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.2.1.98 |
jnxPMIntMaxQMarginMaximum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.2.1.99 |
jnxPMIntAvgQMarginAverage Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.2.1.100 |
jnxOpticsPMDayTableA table of 24 hour interval PM entries for coherent optics. SEQUENCE OF JnxOpticsPMDayEntry .1.3.6.1.4.1.2636.3.71.1.2.3 |
jnxOpticsPMDayEntryA conceptual row that contains information about the PM Day
Table JnxOpticsPMDayEntry .1.3.6.1.4.1.2636.3.71.1.2.3.1 |
jnxOpticsPMDayIndexThis is 1 - cur day/ 2 - prev day Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.1 |
jnxPMDayMinChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - min in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.2 |
jnxPMDayMaxChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - max in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.3 |
jnxPMDayAvgChromaticDispersionChromatic Dispersion measured at Rx Transceiver
port - average in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.4 |
jnxPMDayMinDiffGroupDelayDifferential Group Delay measured at Rx Transceiver
port
::= { jnxOpticsPMDayEntry 5 }
jnxPMDayMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.3.1.6 |
jnxPMDayAvgDiffGroupDelayDifferential Group Delay measured at Rx Transceiver
port
::= { jnxOpticsPMDayEntry 7 }
jnxPMDayMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.3.1.8 |
jnxPMDayMaxPolarStatePolarization state
::= { jnxOpticsPMDayEntry 9 }
jnxPMDayAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.3.1.10 |
jnxPMDayMinPolarDependentLossPolarization Dependent Loss
::= { jnxOpticsPMDayEntry 11 }
jnxPMDayMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.12 |
jnxPMDayAvgPolarDependentLossPolarization Dependent Loss
intervalro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.13 |
jnxPMDayMinQQ
::= { jnxOpticsPMDayEntry 14 }
jnxPMDayMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.15 |
jnxPMDayAvgQQ
::= { jnxOpticsPMDayEntry 16 }
jnxPMDayMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.17 |
jnxPMDayMaxSNRSNR
::= { jnxOpticsPMDayEntry 18 }
jnxPMDayAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.19 |
jnxPMDayMinTxOutputPowerTxOutputPower
::= { jnxOpticsPMDayEntry 20 }
jnxPMDayMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.21 |
jnxPMDayAvgTxOutputPowerTxOutputPower
::= { jnxOpticsPMDayEntry 22 }
jnxPMDayMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.23 |
jnxPMDayMaxRxInputPowerRxInputPower
::= { jnxOpticsPMDayEntry 24 }
jnxPMDayAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.25 |
jnxPMDayTimeStampTime for the Day.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.3.1.26 |
jnxPMDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.3.1.27 |
jnxPMDaySuspectReasonIf jnxPMDaySuspectedFlag is true, provides the reason.ro JnxOpticsSuspectReason .1.3.6.1.4.1.2636.3.71.1.2.3.1.28 |
jnxPMDayMinTxLaserBiasCurrentTransmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.29 |
jnxPMDayMaxTxLaserBiasCurrentTransmit Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.30 |
jnxPMDayAvgTxLaserBiasCurrentTransmit Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.31 |
jnxPMDayMinTemperatureMinimum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.32 |
jnxPMDayMaxTemperatureMaximum Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.33 |
jnxPMDayAvgTemperatureAverage Module Temperaturero Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.34 |
jnxPMDayMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "Mhz" .1.3.6.1.4.1.2636.3.71.1.2.3.1.35 |
jnxPMDayMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.3.1.36 |
jnxPMDayAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.3.1.37 |
jnxPMDayMinRxLaserBiasCurrentReceive LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.38 |
jnxPMDayMaxRxLaserBiasCurrentReceive Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.39 |
jnxPMDayAvgRxLaserBiasCurrentReceive Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.40 |
jnxPMDayMinTecCurrentReceived Minimum TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.41 |
jnxPMDayMaxTecCurrentReceived Maximum TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.42 |
jnxPMDayAvgTecCurrentReceived Average TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.3.1.43 |
jnxPMDayMinResidualDispersionMinimum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.44 |
jnxPMDayMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.45 |
jnxPMDayAvgResidualDispersionAverage Residual Dispersion measured at Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.46 |
jnxPMDayMinLevelHistogramThe Minimum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.47 |
jnxPMDayMaxLevelHistogramThe Maximum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.48 |
jnxPMDayAvgLevelHistogramThe Average rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.49 |
jnxPMDayMinLaserFrequencyErrorMinimum Laser Frequency Error measured at Transceiver portro Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.50 |
jnxPMDayMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver portro Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.51 |
jnxPMDayAvgLaserFrequencyErrorAverage Laser Frequency Error measured at Transceiver portro Integer32 UNITS ".1 Celcius" .1.3.6.1.4.1.2636.3.71.1.2.3.1.52 |
jnxPMDayMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.53 |
jnxPMDayMinFECCorrectedErrorsExponentMinimum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.54 |
jnxPMDayMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.55 |
jnxPMDayMaxFECCorrectedErrorsExponentMaximum Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.56 |
jnxPMDayAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.57 |
jnxPMDayAvgFECCorrectedErrorsExponentAverage Pre-FEC BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.58 |
jnxPMDayMinFECUCorrectedWordsMantissaMinimum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.59 |
jnxPMDayMinFECUCorrectedWordsExponentMinimum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.60 |
jnxPMDayMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.61 |
jnxPMDayMaxFECUCorrectedWordsExponentMaximum Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.62 |
jnxPMDayAvgFECUCorrectedWordsMantissaAverage Uncorrected BER - provides the mantissa value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.63 |
jnxPMDayAvgFECUCorrectedWordsExponentAverage Uncorrected BER - provides the negetive exponent value for Pre-FEC BER expressed in scientific notationro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.3.1.64 |
jnxPMDayMinRxSignalPowerMin RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.65 |
jnxPMDAyMaxRxSignalPowerMax RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.66 |
jnxPMDAyAvgRxSignalPowerAvg RxSignalPower - receive signal powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.3.1.67 |
jnxPMDayMinOSNRMin OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.68 |
jnxPMDayMaxOSNRMax OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.69 |
jnxPMDayAvgOSNRAvg OSNR - optical signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.3.1.70 |
jnxPMDayMinSOPMDMin SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.3.1.71 |
jnxPMDayMaxSOPMDMax SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.3.1.72 |
jnxPMDayAvgSOPMDAvg SOPMD - second-order polarization mode dispersionro Integer32 UNITS "0.1 ps^2" .1.3.6.1.4.1.2636.3.71.1.2.3.1.73 |
jnxPMDayMinSupplyVoltageMinimum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.3.1.74 |
jnxPMDayMaxSupplyVoltageMaximum Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.3.1.75 |
jnxPMDayAvgSupplyVoltageAverage Supply Voltagero Integer32 UNITS "0.01 V" .1.3.6.1.4.1.2636.3.71.1.2.3.1.76 |
jnxPMDayMinSOPROCMinmum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.3.1.77 |
jnxPMDayMaxSOPROCMaximum SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.3.1.78 |
jnxPMDayAvgSOPROCAverage SOPROC - State of Polarisation Rate of Changero Integer32 UNITS "krad/s" .1.3.6.1.4.1.2636.3.71.1.2.3.1.79 |
jnxPMDayMinModulatorBiasXIMinimum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.80 |
jnxPMDayMaxModulatorBiasXIMaximum Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.81 |
jnxPMDayAvgModulatorBiasXIAverage Modulator Bias XIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.82 |
jnxPMDayMinModulatorBiasXQMinimum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.83 |
jnxPMDayMaxModulatorBiasXQMaximum Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.84 |
jnxPMDayAvgModulatorBiasXQAverage Modulator Bias XQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.85 |
jnxPMDayMinModulatorBiasYIMinimum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.86 |
jnxPMDayMaxModulatorBiasYIMaximum Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.87 |
jnxPMDayAvgModulatorBiasYIAverage Modulator Bias YIro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.88 |
jnxPMDayMinModulatorBiasYQMinimum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.89 |
jnxPMDayMaxModulatorBiasYQMaximum Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.90 |
jnxPMDayAvgModulatorBiasYQAverage Modulator Bias YQro Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.91 |
jnxPMDayMinModulatorBiasXPhaseMinimum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.92 |
jnxPMDayMaxModulatorBiasXPhaseMaximum Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.93 |
jnxPMDayAvgModulatorBiasXPhaseAverage Modulator Bias XPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.94 |
jnxPMDayMinModulatorBiasYPhaseMinimum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.95 |
jnxPMDayMaxModulatorBiasYPhaseMaximum Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.96 |
jnxPMDayAvgModulatorBiasYPhaseAverage Modulator Bias YPhasero Integer32 UNITS "0.01 %" .1.3.6.1.4.1.2636.3.71.1.2.3.1.97 |
jnxPMDayMinQMarginMinimum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.3.1.98 |
jnxPMDayMaxQMarginMaximum Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.3.1.99 |
jnxPMDayAvgQMarginAverage Q Marginro Integer32 UNITS "0.1 db" .1.3.6.1.4.1.2636.3.71.1.2.3.1.100 |
jnxOpticsOTIfPMFECCurrentTableA Performance monitoring FEC Current Table. SEQUENCE OF JnxOpticsOTIfPMFECCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.4 |
jnxOpticsOTIfPMFECCurrentEntryA conceptual entry in the Near end or Far End performance
monitoring FEC current table. JnxOpticsOTIfPMFECCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.4.1 |
jnxOpticsOTIfPMFECCurrentSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.4.1.1 |
jnxOpticsOTIfPMCurrentFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.4.1.2 |
jnxOpticsOTIfPMCurrentFECUncorrectedWordsThe number of un-corrected words by the FEC are counted over the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.4.1.3 |
jnxOpticsOTIfPMCurrentFECBERMantissaThe number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.4 |
jnxOpticsOTIfPMCurrentFECBERExponentThe number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.5 |
jnxOpticsOTIfPMCurrentFECMinBERMantissaThe minimum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.6 |
jnxOpticsOTIfPMCurrentFECMinBERExponentThe minimum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.7 |
jnxOpticsOTIfPMCurrentFECMaxBERMantissaThe maximum number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.8 |
jnxOpticsOTIfPMCurrentFECMaxBERExponentThe maximum number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.9 |
jnxOpticsOTIfPMCurrentFECAvgBERMantissaThe average number of Errored bits at receiving side before the FEC
function counted over one second .. mantissa.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.10 |
jnxOpticsOTIfPMCurrentFECAvgBERExponentThe average number of Errored bits at receiving side before the FEC
function counted over one second .. exponent (eg -1).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.11 |
jnxOpticsOTIfPMCurrentFECElapsedTimeTime elapsed for this 15 minute interval.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.71.1.2.4.1.12 |
jnxOpticsOTIfPMFECCurSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.4.1.13 |
jnxOpticsOTIfPMFECIntervalTableA Performance monitoring FEC Interval Table. SEQUENCE OF JnxOpticsOTIfPMFECIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.5 |
jnxOpticsOTIfPMFECIntervalEntryA conceptual entry in the Near end or Far End performance
monitoring FEC interval table. JnxOpticsOTIfPMFECIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.5.1 |
jnxOpticsOTIfPMFECIntervalNumberA number between 1 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minutes interval completed 23 hours and 45
minutes prior to interval 1. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.1 |
jnxOpticsOTIfPMFECIntervalSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.5.1.2 |
jnxOpticsOTIfPMIntervalFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.5.1.3 |
jnxOpticsOTIfPMIntervalFECUncorrectedWordsThe number of words un-corrected words by the FEC are counted over
the interval.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.5.1.4 |
jnxOpticsOTIfPMIntervalMinFECBERMantissaThe minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.5 |
jnxOpticsOTIfPMIntervalMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.6 |
jnxOpticsOTIfPMIntervalMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.7 |
jnxOpticsOTIfPMIntervalMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.8 |
jnxOpticsOTIfPMIntervalAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.9 |
jnxOpticsOTIfPMIntervalAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average Pre
FEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.10 |
jnxOpticsOTIfPMFECIntervalTimeStampTime stamp of this interval.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.5.1.11 |
jnxOpticsOTIfPMFECIntSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.5.1.12 |
jnxOpticsOTIfPMFECCurrentDayTableA Performance monitoring FEC current day table. SEQUENCE OF JnxOpticsOTIfPMFECCurrentDayEntry .1.3.6.1.4.1.2636.3.71.1.2.6 |
jnxOpticsOTIfPMFECCurrentDayEntryA conceptual entry in the Near end or Far End performance
monitoring FEC current day table. JnxOpticsOTIfPMFECCurrentDayEntry .1.3.6.1.4.1.2636.3.71.1.2.6.1 |
jnxOpticsOTIfPMFECCurrentDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.6.1.1 |
jnxOpticsOTIfPMCurrentDayFECCorrectedErrThe number of bits corrected by the FEC are counted in the
interval.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.6.1.2 |
jnxOpticsOTIfPMCurrentDayFECUncorrectedWordsThe number of words un-corrected by the FEC are counted over the
Day.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.6.1.3 |
jnxOpticsOTIfPMCurrentDayMinFECBERMantissaThe minimun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the minimum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.4 |
jnxOpticsOTIfPMCurrentDayMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the minimum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.5 |
jnxOpticsOTIfPMCurrentDayMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.6 |
jnxOpticsOTIfPMCurrentDayMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.7 |
jnxOpticsOTIfPMCurrentDayAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.8 |
jnxOpticsOTIfPMCurrentDayAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the average
PreFEC BER in the current 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.9 |
jnxOpticsOTIfPMFECCurrentDayElapsedTimeTime elapsed for current day.ro Unsigned32 UNITS "seconds" .1.3.6.1.4.1.2636.3.71.1.2.6.1.10 |
jnxOpticsOTIfPMFECCurDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.6.1.11 |
jnxOpticsOTIfPMFECPrevDayTableA Performance monitoring FEC previous day table. SEQUENCE OF JnxOpticsOTIfPMFECPrevDayEntry .1.3.6.1.4.1.2636.3.71.1.2.7 |
jnxOpticsOTIfPMFECPrevDayEntryA conceptual entry in the Near end or Far End performance
monitoring FEC previous day table. JnxOpticsOTIfPMFECPrevDayEntry .1.3.6.1.4.1.2636.3.71.1.2.7.1 |
jnxOpticsOTIfPMFECPrevDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.7.1.1 |
jnxOpticsOTIfPMPrevDayFECCorrectedErrThe number of bits corrected by the FEC are counted in the
previous day.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.7.1.2 |
jnxOpticsOTIfPMPrevDayFECUncorrectedWordsThe number of un-corrected words by the FEC are counted over the
previous Day.ro Counter64 .1.3.6.1.4.1.2636.3.71.1.2.7.1.3 |
jnxOpticsOTIfPMPrevDayMinFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.4 |
jnxOpticsOTIfPMPrevDayMinFECBERExponentThe minimun bit error rate at receiving side before the FEC
function counted over one second .. exponent. This is the maximum Pre
FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.5 |
jnxOpticsOTIfPMPrevDayMaxFECBERMantissaThe maximun bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the maximum Pre
FEC BER in the previous 24hour period (mantissa).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.6 |
jnxOpticsOTIfPMPrevDayMaxFECBERExponentThe maximun bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the maximum Pre FEC BER in the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.7 |
jnxOpticsOTIfPMPrevDayAvgFECBERMantissaThe average bit error rate at receiving side before the FEC
function counted over one second .. mantissa. This is the average Pre
FEC BER during the previous 24hour period (mantissa).ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.8 |
jnxOpticsOTIfPMPrevDayAvgFECBERExponentThe average bit error rate at receiving side before the FEC
function counted over one second .. exponent (eg -3).
This is the average Pre FEC BER during the previous 24hour period.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.9 |
jnxOpticsOTIfPMFECPrevDayTimeStampTime stamp for the Prev day.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.7.1.10 |
jnxOpticsOTIfPMFECPrevDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - clock shift detected
4 - cleared by user
5 - partial data
6 - missing intervals due to restarts
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.7.1.11 |
jnxOpticsOTIfPMFECConfigTableA table of current PM entries. SEQUENCE OF JnxOpticsOTIfPMFECConfigEntry .1.3.6.1.4.1.2636.3.71.1.2.8 |
jnxOpticsOTIfPMFECConfigEntryA conceptual row that contains information about the OT interface PM Current
Table. JnxOpticsOTIfPMFECConfigEntry .1.3.6.1.4.1.2636.3.71.1.2.8.1 |
jnxOpticsOTIfPMFECValidIntervalsThe number of contiguous 15 minute intervals for which valid FEC
PM data is available for the particular interface.ro Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.8.1.1 |
jnxOpticsOTIfPM15MinPreFECBERMantissaThresholdBER (mantissa) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxOpticsOTIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.8.1.2 |
jnxOpticsOTIfPM15MinPreFECBERExponentThresholdThe Pre FEC BER (exponent) by the interface within any
given 15 minutes performance data collection period, which causes the
SNMP agent to send jnxoptIf15MinThreshPreFECBERTCA. One notification
will be sent per interval per interface. A value of `0' will disable
the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.8.1.3 |
jnxOpticsOTIfPM24HourPreFECBERMantissaThresholdBER (mantissa) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.8.1.4 |
jnxOpticsOTIfPM24HourPreFECBERExponentThresholdThe Pre FEC BER (exponent) by the interface within any
given 24 Hour performance data collection period, which causes the
SNMP agent to send jnxoptIf5s24Hour15MinThreshPreFECBERTCA.
One notification will be sent per 24 hour period per interface.
A value of `0' will disable the notification.rw Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.8.1.5 |
jnxOpticsOTIfPMFECBEREnableTCAEnable TCA's - 15minute and 24hr for FEC BERrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.8.1.6 |
jnxIfOpticsPMCurrentTableA table of current PM entries. SEQUENCE OF JnxIfOpticsPMCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.9 |
jnxIfOpticsPMCurrentEntryA conceptual row that contains information about the PM Current
Table. JnxIfOpticsPMCurrentEntry .1.3.6.1.4.1.2636.3.71.1.2.9.1 |
jnxIfOpticsPMCurrentLaneIndexThis is the optics lane number. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.1 |
jnxIfOpticsPMCurChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.2 |
jnxIfOpticsPMCurDiffGroupDelayDifferential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.9.1.3 |
jnxIfOpticsPMCurPolarizationStatePolarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.9.1.4 |
jnxIfOpticsPMCurPolarDepLossThe polarisation dependent loss (PDL) is the difference (in dB)
between the maximum and minimum values of the channel insertion
loss (or gain) of the black-link from point SS to RS due to a
variation of the state of polarization (SOP) over all SOPsro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.5 |
jnxIfOpticsPMCurQ'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.6 |
jnxIfOpticsPMCurSNRSNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.7 |
jnxIfOpticsPMCurTxOutputPowerTxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.8 |
jnxIfOpticsPMCurRxInputPowerRxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.9 |
jnxIfOpticsPMCurMinChromaticDispersionMin Residual Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.10 |
jnxIfOpticsPMCurMaxChromaticDispersionMax Residual Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.11 |
jnxIfOpticsPMCurAvgChromaticDispersionAverage Residual Chromatic Dispersion measured at Rx Transceiver
portro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.12 |
jnxIfOpticsPMCurMinDiffGroupDelayMin Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.9.1.13 |
jnxIfOpticsPMCurMaxDiffGroupDelayMax Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.9.1.14 |
jnxIfOpticsPMCurAvgDiffGroupDelayAverage Differential group delayro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.9.1.15 |
jnxIfOpticsPMCurMinPolarStateMin Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.9.1.16 |
jnxIfOpticsPMCurMaxPolarStateMax Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.9.1.17 |
jnxIfOpticsPMCurAvgPolarStateAvg Polarization statero Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.9.1.18 |
jnxIfOpticsPMCurMinPolarDepLossMin - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.19 |
jnxIfOpticsPMCurMaxPolarDepLossMax - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.20 |
jnxIfOpticsPMCurAvgPolarDepLossAvg - The polarisation dependent loss (PDL)ro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.21 |
jnxIfOpticsPMCurMinQMin 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.22 |
jnxIfOpticsPMCurMaxQMax 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.23 |
jnxIfOpticsPMCurAvgQAvg 'Q' factor estimated at Rx Transceiver portro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.24 |
jnxIfOpticsPMCurMinSNRMin SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.25 |
jnxIfOpticsPMCurMaxSNRMax SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.26 |
jnxIfOpticsPMCurAvgSNRAvg SNR - signal to noise ratioro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.9.1.27 |
jnxIfOpticsPMCurMinTxOutputPowerMin TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.28 |
jnxIfOpticsPMCurMaxTxOutputPowerMax TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.29 |
jnxIfOpticsPMCurAvgTxOutputPowerAvg TxOutputPower - transmit output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.30 |
jnxIfOpticsPMCurMinRxInputPowerMin RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.31 |
jnxIfOpticsPMCurMaxRxInputPowerMax RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.32 |
jnxIfOpticsPMCurAvgRxInputPowerAvg RxInputPower - receive output powerro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.33 |
jnxIfOpticsPMCurSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.9.1.34 |
jnxIfOpticsPMCurSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.35 |
jnxIfOpticsPMCurTxLaserBiasCurrentTrasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.36 |
jnxIfOpticsPMCurMinTxLaserBiasCurrentMinimum trasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.37 |
jnxIfOpticsPMCurMaxTxLaserBiasCurrentMaximum trasmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.38 |
jnxIfOpticsPMCurAvgTxLaserBiasCurrentAverage LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.39 |
jnxIfOpticsPMCurTemperatureTemperature measured at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.9.1.40 |
jnxIfOpticsPMCurMinTemperatureMinimum Temperature measured at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.9.1.41 |
jnxIfOpticsPMCurMaxTemperatureMaximum Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.9.1.42 |
jnxIfOpticsPMCurAvgTemperatureAverage Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.9.1.43 |
jnxIfOpticsPMCurCarFreqOffsetCarrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.44 |
jnxIfOpticsPMCurMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.45 |
jnxIfOpticsPMCurMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.46 |
jnxIfOpticsPMCurAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.47 |
jnxIfOpticsPMCurRxLaserBiasCurrentReceived LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.48 |
jnxIfOpticsPMCurMinRxLaserBiasCurrentReceived Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.49 |
jnxIfOpticsPMCurMaxRxLaserBiasCurrentReceived Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.50 |
jnxIfOpticsPMCurAvgRxLaserBiasCurrentReceived Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.51 |
jnxIfOpticsPMCurTecCurrentReceived TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.52 |
jnxIfOpticsPMCurMinTecCurrentReceived Minimum TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.53 |
jnxIfOpticsPMCurMaxTecCurrentReceived Maximum TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.54 |
jnxIfOpticsPMCurAvgTecCurrentReceived Average TecCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.9.1.55 |
jnxIfOpticsPMCurResidualDispersionResidual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.56 |
jnxIfOpticsPMCurMinResidualDispersionMinimum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.57 |
jnxIfOpticsPMCurMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.58 |
jnxIfOpticsPMCurAvgResidualDispersionAverage Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.9.1.59 |
jnxIfOpticsPMCurLevelHistogramThe rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.60 |
jnxIfOpticsPMCurMinLevelHistogramThe Minimum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.61 |
jnxIfOpticsPMCurMaxLevelHistogramThe Maximum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.62 |
jnxIfOpticsPMCurAvgLevelHistogramThe Average rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.63 |
jnxIfOpticsPMCurLaserFrequencyErrorLaser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.64 |
jnxIfOpticsPMCurMinLaserFrequencyErrorMinimum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.65 |
jnxIfOpticsPMCurMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.66 |
jnxIfOpticsPMCurAvgLaserFrequencyErrorAverage Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.9.1.67 |
jnxIfOpticsPMCurFECCorrectedErrorsMantissaPre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.68 |
jnxIfOpticsPMCurFECCorrectedErrorsExponentPre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.69 |
jnxIfOpticsPMCurMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.70 |
jnxIfOpticsPMCurMinFECCorrectedErrorsExponentMinimum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.71 |
jnxIfOpticsPMCurMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.72 |
jnxIfOpticsPMCurMaxFECCorrectedErrorsExponentMaximum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.73 |
jnxIfOpticsPMCurAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.74 |
jnxIfOpticsPMCurAvgFECCorrectedErrorsExponentAverage Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.75 |
jnxIfOpticsPMCurFECUCorrectedWordsMantissaUncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.76 |
jnxIfOpticsPMCurFECUCorrectedWordsExponentUncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.77 |
jnxIfOpticsPMCurMinFECUCorrectedWordsMantissaMinimum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.78 |
jnxIfOpticsPMCurMinFECUCorrectedWordsExponentMinimum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.79 |
jnxIfOpticsPMCurMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.80 |
jnxIfOpticsPMCurMaxFECUCorrectedWordsExponentMaximum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.81 |
jnxIfOpticsPMCurAvgFECUCorrectedWordsMantissaAverage Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.82 |
jnxIfOpticsPMCurAvgFECUCorrectedWordsExponentAverage Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.9.1.83 |
jnxIfOpticsPMIntervalTableA table of current PM entries. SEQUENCE OF JnxIfOpticsPMIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.10 |
jnxIfOpticsPMIntervalEntryA conceptual row that contains information about the PM Interval
Table. JnxIfOpticsPMIntervalEntry .1.3.6.1.4.1.2636.3.71.1.2.10.1 |
jnxIfOpticsPMIntervalLaneIndexThis is the optics lane number. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.1 |
jnxIfOpticsPMIntervalNumberThis is the 15 mintute interavl number. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.2 |
jnxIfOpticsPMIntMinChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - min in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.3 |
jnxIfOpticsPMIntMaxChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - max in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.4 |
jnxIfOpticsPMIntAvgChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - average in the 15 minute intervalro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.5 |
jnxIfOpticsPMIntMinDiffGroupDelayDifferential group delay measured at Rx Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 6 }
jnxIfOpticsPMIntMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.10.1.7 |
jnxIfOpticsPMIntAvgDiffGroupDelayDifferential group delay measured at Rx Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 8 }
jnxIfOpticsPMIntMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.10.1.9 |
jnxIfOpticsPMIntMaxPolarStatePolarization state
::= { jnxIfOpticsPMIntervalEntry 10 }
jnxIfOpticsPMIntAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.10.1.11 |
jnxIfOpticsPMIntMinPolarDependentLossPolarization Dependent Loss
::= { jnxIfOpticsPMIntervalEntry 12 }
jnxIfOpticsPMIntMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.10.1.13 |
jnxIfOpticsPMIntAvgPolarDependentLossPolarization Dependent Loss
intervalro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.10.1.14 |
jnxIfOpticsPMIntMinQQ
::= { jnxIfOpticsPMIntervalEntry 15 }
jnxIfOpticsPMIntMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.10.1.16 |
jnxIfOpticsPMIntAvgQQ
::= { jnxIfOpticsPMIntervalEntry 17 }
jnxIfOpticsPMIntMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.10.1.18 |
jnxIfOpticsPMIntMaxSNRSNR
::= { jnxIfOpticsPMIntervalEntry 19 }
jnxIfOpticsPMIntAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.10.1.20 |
jnxIfOpticsPMIntMinTxOutputPowerTxOutputPower
::= { jnxIfOpticsPMIntervalEntry 21 }
jnxIfOpticsPMIntMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.22 |
jnxIfOpticsPMIntAvgTxOutputPowerTxOutputPower
::= { jnxIfOpticsPMIntervalEntry 23 }
jnxIfOpticsPMIntMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.24 |
jnxIfOpticsPMIntMaxRxInputPowerRxInputPower
::= { jnxIfOpticsPMIntervalEntry 25 }
jnxIfOpticsPMIntAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.26 |
jnxIfOpticsPMIntTimeStampTime stamp PM intervalro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.10.1.27 |
jnxIfOpticsPMIntSuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.10.1.28 |
jnxIfOpticsPMIntSuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - interval too short secs < 890
7 - interval too long secs > 910
8 - near end unavailable
9 - far end unavailable
10 - partial data
11 - missing intervals due to restartsro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.29 |
jnxIfOpticsPMIntMinTxLaserBiasCurrentTransmit Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.30 |
jnxIfOpticsPMIntMaxTxLaserBiasCurrentTransmit Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.31 |
jnxIfOpticsPMIntAvgTxLaserBiasCurrentTransmit Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.32 |
jnxIfOpticsPMIntMinTemperatureMinimum Temperature measured at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.10.1.33 |
jnxIfOpticsPMIntMaxTemperatureMaximum Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.10.1.34 |
jnxIfOpticsPMIntAvgTemperatureAverage Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.10.1.35 |
jnxIfOpticsPMIntMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "Mhz" .1.3.6.1.4.1.2636.3.71.1.2.10.1.36 |
jnxIfOpticsPMIntMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.10.1.37 |
jnxIfOpticsPMIntAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.10.1.38 |
jnxIfOpticsPMIntMinRxLaserBiasCurrentReceive Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.39 |
jnxIfOpticsPMIntMaxRxLaserBiasCurrentReceive Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.40 |
jnxIfOpticsPMIntAvgRxLaserBiasCurrentReceive Average LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.41 |
jnxIfOpticsPMIntMinTecCurrentReceived Minimum TecCurrent measured at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 42 }
jnxIfOpticsPMIntMaxTecCurrent OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.43 |
jnxIfOpticsPMIntAvgTecCurrentReceived Average TecCurrent measured at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 44 }
jnxIfOpticsPMIntMinResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.10.1.45 |
jnxIfOpticsPMIntMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 46 }
jnxIfOpticsPMIntAvgResidualDispersion OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.10.1.47 |
jnxIfOpticsPMIntMinLevelHistogramThe Minimum rate of measured signal at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 48 }
jnxIfOpticsPMIntMaxLevelHistogram OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.49 |
jnxIfOpticsPMIntAvgLevelHistogramThe Average rate of measured signal at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 50 }
jnxIfOpticsPMIntMinLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.51 |
jnxIfOpticsPMIntMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver
port
::= { jnxIfOpticsPMIntervalEntry 52 }
jnxIfOpticsPMIntAvgLaserFrequencyError OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.10.1.53 |
jnxIfOpticsPMIntMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 54 }
jnxIfOpticsPMIntMinFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.55 |
jnxIfOpticsPMIntMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 56 }
jnxIfOpticsPMIntMaxFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.57 |
jnxIfOpticsPMIntAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 58 }
jnxIfOpticsPMIntAvgFECCorrectedErrorsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.59 |
jnxIfOpticsPMIntMinFECUCorrectedWordsMantissaMinimum Uncorrected BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 60 }
jnxIfOpticsPMIntMinFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.61 |
jnxIfOpticsPMIntMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 62 }
jnxIfOpticsPMIntMaxFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.63 |
jnxIfOpticsPMIntAvgFECUCorrectedWordsMantissaAverage Uncorrected BER since last counter reset
::= { jnxIfOpticsPMIntervalEntry 64 }
jnxIfOpticsPMIntAvgFECUCorrectedWordsExponent OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.10.1.65 |
jnxIfOpticsPMDayTableA table of current PM Day entries. SEQUENCE OF JnxIfOpticsPMDayEntry .1.3.6.1.4.1.2636.3.71.1.2.11 |
jnxIfOpticsPMDayEntryA conceptual row that contains information about the PM Day
Table JnxIfOpticsPMDayEntry .1.3.6.1.4.1.2636.3.71.1.2.11.1 |
jnxIfOpticsPMDayLaneIndexThis is the optics lane number. Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.1 |
jnxIfOpticsPMDayIndexThis is 1 - cur day/ 2 - prev day Unsigned32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.2 |
jnxIfOpticsPMDayMinChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - min in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.3 |
jnxIfOpticsPMDayMaxChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - max in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.4 |
jnxIfOpticsPMDayAvgChromaticDispersionResidual Chromatic Dispersion measured at Rx Transceiver
port - average in the dayro Integer32 UNITS "ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.5 |
jnxIfOpticsPMDayMinDiffGroupDelayDifferential Group Delay measured at Rx Transceiver
port
::= { jnxIfOpticsPMDayEntry 6 }
jnxIfOpticsPMDayMaxDiffGroupDelay OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.11.1.7 |
jnxIfOpticsPMDayAvgDiffGroupDelayDifferential Group Delay measured at Rx Transceiver
port
::= { jnxIfOpticsPMDayEntry 8 }
jnxIfOpticsPMDayMinPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "ps" .1.3.6.1.4.1.2636.3.71.1.2.11.1.9 |
jnxIfOpticsPMDayMaxPolarStatePolarization state
::= { jnxIfOpticsPMDayEntry 10 }
jnxIfOpticsPMDayAvgPolarState OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "rad/s" .1.3.6.1.4.1.2636.3.71.1.2.11.1.11 |
jnxIfOpticsPMDayMinPolarDependentLossPolarization Dependent Loss
::= { jnxIfOpticsPMDayEntry 12 }
jnxIfOpticsPMDayMaxPolarDependentLoss OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.11.1.13 |
jnxIfOpticsPMDayAvgPolarDependentLossPolarization Dependent Loss
intervalro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.11.1.14 |
jnxIfOpticsPMDayMinQQ
::= { jnxIfOpticsPMDayEntry 15 }
jnxIfOpticsPMDayMaxQ OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.11.1.16 |
jnxIfOpticsPMDayAvgQQ
::= { jnxIfOpticsPMDayEntry 17 }
jnxIfOpticsPMDayMinSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.11.1.18 |
jnxIfOpticsPMDayMaxSNRSNR
::= { jnxIfOpticsPMDayEntry 19 }
jnxIfOpticsPMDayAvgSNR OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.1 dB" .1.3.6.1.4.1.2636.3.71.1.2.11.1.20 |
jnxIfOpticsPMDayMinTxOutputPowerTxOutputPower
::= { jnxIfOpticsPMDayEntry 21 }
jnxIfOpticsPMDayMaxTxOutputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.22 |
jnxIfOpticsPMDayAvgTxOutputPowerTxOutputPower
::= { jnxIfOpticsPMDayEntry 23 }
jnxIfOpticsPMDayMinRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.24 |
jnxIfOpticsPMDayMaxRxInputPowerRxInputPower
::= { jnxIfOpticsPMDayEntry 25 }
jnxIfOpticsPMDayAvgRxInputPower OBJECT-TYPE
SYNTAX Integer32
UNITSro Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.26 |
jnxIfOpticsPMDayTimeStampTime for the Day.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.11.1.27 |
jnxIfOpticsPMDaySuspectedFlagIf true, the data in this entry may be unreliable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.2.11.1.28 |
jnxIfOpticsPMDaySuspectReasonIf SuspectedFlag is true, the reson for the PM data being suspect.
0 - not applicable
1 - unknown
2 - new object
3 - interface disabled
4 - clock shift detected
5 - cleared by user
6 - partial data
7 - one or more intervals are invaildro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.29 |
jnxIfOpticsPMDayMinTxLaserBiasCurrentTransmit LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.30 |
jnxIfOpticsPMDayMaxTxLaserBiasCurrentTransmit Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.31 |
jnxIfOpticsPMDayAvgTxLaserBiasCurrentTransmit Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.32 |
jnxIfOpticsPMDayMinTemperatureMinimum Temperature measured at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.11.1.33 |
jnxIfOpticsPMDayMaxTemperatureMaximum Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.11.1.34 |
jnxIfOpticsPMDayAvgTemperatureAverage Temperature measure at Transceiver portro Integer32 UNITS "Celcius" .1.3.6.1.4.1.2636.3.71.1.2.11.1.35 |
jnxIfOpticsPMDayMinCarFreqOffsetMinimum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "Mhz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.36 |
jnxIfOpticsPMDayMaxCarFreqOffsetMaximum Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.37 |
jnxIfOpticsPMDayAvgCarFreqOffsetAverage Carrier frequency offset measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.38 |
jnxIfOpticsPMDayMinRxLaserBiasCurrentReceive LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.39 |
jnxIfOpticsPMDayMaxRxLaserBiasCurrentReceive Minimum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.40 |
jnxIfOpticsPMDayAvgRxLaserBiasCurrentReceive Maximum LaserBiasCurrent measured at Transceiver portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.41 |
jnxIfOpticsPMDayMinTecCurrentReceived Minimum TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.42 |
jnxIfOpticsPMDayMaxTecCurrentReceived Maximum TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.43 |
jnxIfOpticsPMDayAvgTecCurrentReceived Average TecCurrent measured at Transceiver
portro Integer32 UNITS ".1 mA" .1.3.6.1.4.1.2636.3.71.1.2.11.1.44 |
jnxIfOpticsPMDayMinResidualDispersionMinimum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.45 |
jnxIfOpticsPMDayMaxResidualDispersionMaximum Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.46 |
jnxIfOpticsPMDayAvgResidualDispersionAverage Residual Dispersion measured at Transceiver
portro Integer32 UNITS "0.1 ps/nm" .1.3.6.1.4.1.2636.3.71.1.2.11.1.47 |
jnxIfOpticsPMDayMinLevelHistogramThe Minimum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.48 |
jnxIfOpticsPMDayMaxLevelHistogramThe Maximum rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.49 |
jnxIfOpticsPMDayAvgLevelHistogramThe Average rate of measured signal at Transceiver portro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.50 |
jnxIfOpticsPMDayMinLaserFrequencyErrorMinimum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.51 |
jnxIfOpticsPMDayMaxLaserFrequencyErrorMaximum Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.52 |
jnxIfOpticsPMDayAvgLaserFrequencyErrorAverage Laser Frequency Error measured at Transceiver portro Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.2.11.1.53 |
jnxIfOpticsPMDayMinFECCorrectedErrorsMantissaMinimum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.54 |
jnxIfOpticsPMDayMinFECCorrectedErrorsExponentMinimum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.55 |
jnxIfOpticsPMDayMaxFECCorrectedErrorsMantissaMaximum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.56 |
jnxIfOpticsPMDayMaxFECCorrectedErrorsExponentMaximum Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.57 |
jnxIfOpticsPMDayAvgFECCorrectedErrorsMantissaAverage Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.58 |
jnxIfOpticsPMDayAvgFECCorrectedErrorsExponentAverage Pre-FEC BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.59 |
jnxIfOpticsPMDayMinFECUCorrectedWordsMantissaMinimum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.60 |
jnxIfOpticsPMDayMinFECUCorrectedWordsExponentMinimum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.61 |
jnxIfOpticsPMDayMaxFECUCorrectedWordsMantissaMaximum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.62 |
jnxIfOpticsPMDayMaxFECUCorrectedWordsExponentMaximum Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.63 |
jnxIfOpticsPMDayAvgFECUCorrectedWordsMantissaAverage Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.64 |
jnxIfOpticsPMDayAvgFECUCorrectedWordsExponentAverage Uncorrected BER since last counter resetro Integer32 .1.3.6.1.4.1.2636.3.71.1.2.11.1.65 |
jnxOpticsAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.3 |
jnxOpticsNotificationTableA table of Notification entries. SEQUENCE OF JnxOpticsNotificationEntry .1.3.6.1.4.1.2636.3.71.1.3.1 |
jnxOpticsNotificationEntryA conceptual entry in the Notification table. JnxOpticsNotificationEntry .1.3.6.1.4.1.2636.3.71.1.3.1.1 |
jnxOpticsNotificationLocationThe object identifies indicates if this entry was for
Near end/Far end.ro JnxOpticsLocation .1.3.6.1.4.1.2636.3.71.1.3.1.1.1 |
jnxOpticsNotificationDirectionThe object identifies indicates if this entry was for
for the Tx/Rx or both.ro JnxOpticsDirection .1.3.6.1.4.1.2636.3.71.1.3.1.1.2 |
jnxOpticsLastNotificationIdThe object identifies the OTN alarm that most recently
was set or cleared.ro JnxOpticsNotificationId .1.3.6.1.4.1.2636.3.71.1.3.1.1.3 |
jnxOpticsNotificationSeverityThe object identifies the severity of the last alarm/alert
that most recently was set or cleared.ro JnxOpticsSeverity .1.3.6.1.4.1.2636.3.71.1.3.1.1.4 |
jnxOpticsNotificationDateThis specifies the date and time when this alarm occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.3.1.1.5 |
jnxOpticsNotificationLaneIndexThe lane index associated with this subject..
eg port. Integer32 .1.3.6.1.4.1.2636.3.71.1.3.1.1.6 |
jnxOpticsOCh2 OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.4 |
jnxOpticsOCh2ConfigTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the optics config Table.obsolete SEQUENCE OF JnxOpticsOCh2ConfigEntry .1.3.6.1.4.1.2636.3.71.1.4.1 |
jnxOpticsOCh2ConfigEntryA conceptual row that contains information about the optics
config OCh2 Table.obsolete JnxOpticsOCh2ConfigEntry .1.3.6.1.4.1.2636.3.71.1.4.1.1 |
jnxOpticsOCh2CfgContIndexThe Contianer index associated with this subjectobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.1 |
jnxOpticsOCh2CfgL1IndexFPC slot number of the interfaceobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.2 |
jnxOpticsOCh2CfgL2IndexPIC slot number of the interfaceobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.3 |
jnxOpticsOCh2CfgL3IndexPort number of the interfaceobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.4 |
jnxOpticsOCh2CfgL4IndexSub-Port number of the interfaceobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.5 |
jnxOpticsOCh2Type0 - none
1 - SFP
2 - XFP
3 - SFP+
4 - XFP+
5 - CFP
6 - CFP+
7 - Non pluggableroobsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.6 |
jnxOpticsOCh2LaserEnable0 - laser off
1 - laser onrwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.7 |
jnxOpticsOCh2WavelengthThe transmit wavelength of the laser.rwobsolete Unsigned32 UNITS "0.01 nm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.8 |
jnxOpticsOCh2SpacingA minimum nominal difference in frequency (GHz) between two
adjacent channels.roobsolete JnxOpticsChannelSpacing .1.3.6.1.4.1.2636.3.71.1.4.1.1.9 |
jnxOpticsOCh2ModulationModulation
Unknown - (1),
NonPSK - (2),
ODB - (3),
DPSK - (4),
QPSK - (5),
DQPSK - (6),
DPQPSK - (7),
16QAM - (8),
64QAM - (9),
256QAM - (10)roobsolete Unsigned32 .1.3.6.1.4.1.2636.3.71.1.4.1.1.10 |
jnxOpticsOCh2TxOpticalPowerTransmit optical power.rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.11 |
jnxOpticsOCh2RxOpticalPowerReceive optical power.roobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.12 |
jnxOpticsOCh2ModTempHighThreshHigh module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .roobsolete Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.4.1.1.13 |
jnxOpticsOCh2ModTempLowThreshLow module temerature in degree fahrenheit for a 15 minute period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .roobsolete Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.4.1.1.14 |
jnxOpticsOCh2TxPowHighThreshTx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.15 |
jnxOpticsOCh2TxPowLowThreshTx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.16 |
jnxOpticsOCh2RxPowHighThreshRx power for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.17 |
jnxOpticsOCh2RxPowLowThreshRx Power for a 15 minute period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.18 |
jnxOpticsOCh24HourModTemHiThreshHigh module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .roobsolete Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.4.1.1.19 |
jnxOpticsOCh24HourModTemLoThreshLow module temerature in degree fahrenheit for a 24 hour period
above which a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .roobsolete Integer32 UNITS "Celsius (0.01 degrees C)" .1.3.6.1.4.1.2636.3.71.1.4.1.1.20 |
jnxOpticsOCh24HourTxPowHiThreshTx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.21 |
jnxOpticsOCh24HourTxPowLoThreshTx for a 24 hour period Power below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.22 |
jnxOpticsOCh24HourRxPowHiThreshRx power for a 24 hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.23 |
jnxOpticsOCh24HourRxPowLoThreshRx Power for a 24 hour period below which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.24 |
jnxOpticsOCh2RxLosPowWarnThreshRx Power warning threshold for seeting the optical LOS
warning.rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.25 |
jnxOpticsOCh2RxLosPowAlarmThreshRx Power alarm threshold for seeting the optical LOS
warning.rwobsolete Integer32 UNITS "0.01 dbm" .1.3.6.1.4.1.2636.3.71.1.4.1.1.26 |
jnxOpticsOCh2CurrentStatusroobsolete Bits .1.3.6.1.4.1.2636.3.71.1.4.1.1.27 |
jnxOpticsOCh2TxPowHiEnableTCAEnable/Disable for the Tx Power High TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.28 |
jnxOpticsOCh2TxPowLoEnableTCAEnable/Disable for the Tx Power Low TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.29 |
jnxOpticsOCh2RxPowHiEnableTCAEnable/Disable for the Rx Power High TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.30 |
jnxOpticsOCh2RxPowLoEnableTCAEnable/Disable for the Rx Power Low TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.31 |
jnxOpticsOCh2ModTempHiEnableTCAEnable/Disable for the Module Temp High TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.32 |
jnxOpticsOCh2ModTempLoEnableTCAEnable/Disable for the Module Temp Low TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.33 |
jnxOpticsOCh2CarFreqOffHiEnTCAEnable/Disable for the Carrier Frequency Offset High TCA.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.34 |
jnxOpticsOCh2CarFreqOffLoEnTCAEnable/Disable for the CarrierFreqOffetLow TCA's.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.1.1.35 |
jnxOpticsOCh2CarFreqOffHiThreshCarrier frequency offset for a 15 minute period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.4.1.1.36 |
jnxOpticsOCh24HourCarFreqOffHiThCarrier frequency offset for a 24 Hour period above which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.4.1.1.37 |
jnxOpticsOCh2CarFreqOffLoThreshCarrier frequency offset for a 15 minute period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.4.1.1.38 |
jnxOpticsOCh24HourCarFreqOffLoThCarrier frequency offset for a 24 Hour period Low which
a Threshold Crossing Alert (TCA) should be sent.
Only one TCA will be sent per period .rwobsolete Integer32 UNITS "MHz" .1.3.6.1.4.1.2636.3.71.1.4.1.1.39 |
jnxOpticsOCh2TraceToneCfgTableTable was for 48x10G/12x40G gingerALE PIC in 10G mode.
It is not supported hence marked as obsolete.
Information about the optics tests.obsolete SEQUENCE OF JnxOpticsOCh2TraceToneCfgEntry .1.3.6.1.4.1.2636.3.71.1.4.2 |
jnxOpticsOCh2TraceToneCfgEntryInformation about the optics FRU's.obsolete JnxOpticsOCh2TraceToneCfgEntry .1.3.6.1.4.1.2636.3.71.1.4.2.1 |
jnxOpticsOCh2TraceToneCfgIndxContainer Index associated with this subject..obsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.2.1.1 |
jnxOpticsOCh2TraceToneCfgL1IndxFPC Slot number of the interface.obsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.2.1.2 |
jnxOpticsOCh2TraceToneCfgL2IndxPIC Slot number of the interface.obsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.2.1.3 |
jnxOpticsOCh2TraceToneCfgL3IndxPort number of the interface.obsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.2.1.4 |
jnxOpticsOCh2TraceToneCfgL4IndxSub-Port number of the interface.obsolete Integer32 .1.3.6.1.4.1.2636.3.71.1.4.2.1.5 |
jnxOpticsOCh2TraceToneCfgTxEnThis will enable/disable the transmit Trace tone feature.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.2.1.6 |
jnxOpticsOCh2TraceToneCfgRxEnThis will enable/disable the receive Trace tone feature.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.4.2.1.7 |
jnxOpticsOCh2TraceToneCfgDestIdThis is the destination Id of the link
ID/ the chassis and the blade.
The transmit messages will also have the src id
which is this chassis id and this port info.rwobsolete OCTET STRING .1.3.6.1.4.1.2636.3.71.1.4.2.1.8 |
jnxOpticsOCh2TraceToneCfgTxMsgThis will be the transmit data in the tracetone message.rwobsolete OCTET STRING .1.3.6.1.4.1.2636.3.71.1.4.2.1.9 |
jnxOpticsOCh2TraceToneCfgRxMsgThis will be the receive data in the trace tone message.roobsolete OCTET STRING .1.3.6.1.4.1.2636.3.71.1.4.2.1.10 |
jnxIplcAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.5 |
jnxIplcNotificationTableA table of Notification entries. SEQUENCE OF JnxIplcNotificationEntry .1.3.6.1.4.1.2636.3.71.1.5.1 |
jnxIplcNotificationEntryA conceptual entry in the Notification table. JnxIplcNotificationEntry .1.3.6.1.4.1.2636.3.71.1.5.1.1 |
jnxIplcNotificationLocationThe object identifies indicates if this entry was for
Near end/Far end.ro JnxOpticsLocation .1.3.6.1.4.1.2636.3.71.1.5.1.1.1 |
jnxIplcNotificationDirectionThe object identifies indicates if this entry was for
for the Tx/Rx or both.ro JnxOpticsDirection .1.3.6.1.4.1.2636.3.71.1.5.1.1.2 |
jnxIplcNotificationSlotThe object identifies indicates if this entry was for
slot id.ro Integer32 .1.3.6.1.4.1.2636.3.71.1.5.1.1.3 |
jnxIplcNotificationChannelThe object identifies indicates if this entry was for
Channel id.ro Integer32 .1.3.6.1.4.1.2636.3.71.1.5.1.1.4 |
jnxIplcLastNotificationIdThe object identifies the IPLC alarm that most recently
was set or cleared.ro JnxIplcNotificationId .1.3.6.1.4.1.2636.3.71.1.5.1.1.5 |
jnxIplcNotificationSeverityThe object identifies the severity of the last alarm/alert
that most recently was set or cleared.ro JnxOpticsSeverity .1.3.6.1.4.1.2636.3.71.1.5.1.1.6 |
jnxIplcNotificationDateThis specifies the date and time when this alarm occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.5.1.1.7 |
jnxIlaAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.2636.3.71.1.6 |
jnxIlaNotificationTableA table of Notification entries. SEQUENCE OF JnxIlaNotificationEntry .1.3.6.1.4.1.2636.3.71.1.6.1 |
jnxIlaNotificationEntryA conceptual entry in the Notification table. JnxIlaNotificationEntry .1.3.6.1.4.1.2636.3.71.1.6.1.1 |
jnxIlaNotificationLocationThe object identifies indicates if this entry was for
Near end/Far end.ro JnxOpticsLocation .1.3.6.1.4.1.2636.3.71.1.6.1.1.1 |
jnxIlaNotificationDirectionThe object identifies indicates if this entry was for
for the Tx/Rx or both.ro JnxOpticsDirection .1.3.6.1.4.1.2636.3.71.1.6.1.1.2 |
jnxIlaNotificationSlotThe object identifies indicates if this entry was for
slot id.ro Integer32 .1.3.6.1.4.1.2636.3.71.1.6.1.1.3 |
jnxIlaNotificationIlaIDThe object identifies indicates if this entry was for
the ILA id.ro Integer32 .1.3.6.1.4.1.2636.3.71.1.6.1.1.4 |
jnxIlaLastNotificationIdThe object identifies the Ila alarm that most recently
was set or cleared.ro JnxIlaNotificationId .1.3.6.1.4.1.2636.3.71.1.6.1.1.5 |
jnxIlaNotificationSeverityThe object identifies the severity of the last alarm/alert
that most recently was set or cleared.ro JnxOpticsSeverity .1.3.6.1.4.1.2636.3.71.1.6.1.1.6 |
jnxIlaNotificationDateThis specifies the date and time when this alarm occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2636.3.71.1.6.1.1.7 |
jnxOpticsNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.22.0 |
jnxOpticsNotificationSetNotification of a recently set optics alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.22.0.1 |
jnxOpticsNotificationClearedNotification of a recently cleared optics alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.22.0.2 |
jnxIfOpticsNotificationAdminStatusNotification of the admin state of the optics interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.22.0.3 |
jnxIfOpticsNotificationOperStatusNotification of operational state of the optics interface NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.22.0.4 |
jnxIplcNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.28.0 |
jnxIplcNotificationSetNotification of a recently set iplc alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.28.0.1 |
jnxIplcNotificationClearedNotification of a recently cleared iplc alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.28.0.2 |
jnxIlaNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2636.4.29.0 |
jnxIlaNotificationSetNotification of a recently set iplc alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.29.0.1 |
jnxIlaNotificationClearedNotification of a recently cleared iplc alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2636.4.29.0.2 |