SYNOPTICS-TOKENRING-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
84
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
84 total| Object Name |
|---|
s3000TrBoard OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.2 |
RFC1155-SMI Unknown .1.3.6.1.4.1.45.1.3.3.2 |
s3TrCommonBoardTableInformation maintained for each token ring board. The
information can be retrieved for any token ring board, even if
the board is not on the same backplane ring as this NMM. The
instance is the slot number of the concentrator that the board
occupies. SEQUENCE OF S3TrCommonBoardEntry .1.3.6.1.4.1.45.1.3.3.2.2 |
s3TrCommonBoardEntryThere is one entry per board in this table. S3TrCommonBoardEntry .1.3.6.1.4.1.45.1.3.3.2.2.1 |
s3TrCommonBoardIndexA unique value for each board. Its value ranges between 1
and 12. The value for each board must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization. If a board is
inserted or reinserted in a concentrator then the NMM has to
be reinitialized.ro INTEGER .1.3.6.1.4.1.45.1.3.3.2.2.1.1 |
s3TrCommonBoardRing1or2Determines which ring the board is currently using on the
concentrator backplane.ro Enumeration .1.3.6.1.4.1.45.1.3.3.2.2.1.2 |
s3TrCommonBoardRingSpeedToken Ring speed of the ring that this board is connected to.ro Enumeration .1.3.6.1.4.1.45.1.3.3.2.2.1.3 |
s3000TrPort OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.3 |
s3TrPortTableA table containing information about each port of a LattisNet
concentrator. The number of entries is given by knowing the
number of occupied slots in s3ChassisSlotConfigTable whose
s3SlotModuleType is of a token ring type and is on the same
physical ring as the agent NMM. SEQUENCE OF S3TrPortEntry .1.3.6.1.4.1.45.1.3.3.3.1 |
s3TrPortEntryA port entry containing objects at the port level for a
particular port. S3TrPortEntry .1.3.6.1.4.1.45.1.3.3.3.1.1 |
s3TrPortBoardIndexA unique value for each board. Its value ranges between 1
and 12. The value for each board must remain constant at
least from one re-initialization of the entity's network
management system to the next re-initialization. If a board
is inserted or reinserted in a concentrator then the NMM has
to be reinitialized.ro INTEGER .1.3.6.1.4.1.45.1.3.3.3.1.1.1 |
s3TrPortIndexA unique value for each port. Its value ranges between 1
and 12. The value for each port must remain constant at least
from one re-initialization of the entity's network management
system to the next re-initialization. If the board is an NMM
board it will only have 2 ports, with Port 1 being for Ring In
and Port 2 being for Ring Out.ro INTEGER .1.3.6.1.4.1.45.1.3.3.3.1.1.2 |
s3TrPortWrapStatus of the port. Setting wrap(2) disconnects the port
from the ring and setting this object to connect(3) connects
the port to the ring.rw Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.3 |
s3TrPortTestLatchStatus of the test latch which is used to set the channel
decoder used to monitor the health of the communication path
between the NMM and the module channel.rw Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.4 |
s3TrPortRelayStatusStatus of the channel's present relay mode. On(2) means the
channel is in the ring and off(3) means the channel is
bypassed.ro Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.5 |
s3TrPortPhantomStatusStatus of the ring access request signal.ro Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.6 |
s3TrPortPhantomChangeFlagChange(3) indicates that port phantom has been changed from
OFF to ON. After inquiry by NMS, it will be cleared to
noChange(2). Port phantom changing from ON to OFF has no
impact on this object.ro Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.7 |
s3TrPortChgSyn2IBMIf the port is on a ring in/ring out module this object
changes the strap state depending on the jumper setting
retrieved as s3TrPortStrap. If the strap is set for SynOptics
phantom option, this object can be changed to ibm(3). If the
strap is set for non-SynOptics option, this object can not be
changed. Non ring in/ring out modules or fiber ring in/ring out
modules must take on the value of notSupported(1).rw Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.8 |
s3TrPortStrapIf the port is on a ring in/ring out module this object
signifies whether the hardware jumper is in synoptics(2) mode
or ibm(3) mode. This information is retrieved using a NMI
command. For ports on fiber ring in/ring out modules, and
those ports not on ring in/ring out modules, the agent always
returns notSupported(1).ro Enumeration .1.3.6.1.4.1.45.1.3.3.3.1.1.9 |
s3000TrNmm OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.4 |
s3TrNmmFnNumDefines the flat network number that this NMM is part of.rw INTEGER .1.3.6.1.4.1.45.1.3.3.4.1 |
s3TrNmmRingNumDefines the segment number that this NMM is connected to.ro INTEGER .1.3.6.1.4.1.45.1.3.3.4.2 |
s3TrNmmSlotNumDefines the slot number that this NMM is connected to. New
NMS implementations should use the object s3AgentMySlotId
defined in the common MIB.rodeprecated INTEGER .1.3.6.1.4.1.45.1.3.3.4.3 |
s3TrNmmFpuIdRevThe revision of the Front-end Frame Processing unit.
0=Rev. A, 1=Rev. B, etc.ro INTEGER .1.3.6.1.4.1.45.1.3.3.4.4 |
s3TrNmmFpuStatusThe status of the Front-end Frame Processing Unit.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.5 |
s3TrNmmDramSizeThe highest address of the DRAM in the NMM memory map.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.6 |
s3TrNmmEepromSizeThe size of the EEPROM in the NMM memory map.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.7 |
s3TrNmmGrpAddrFrmsRxOkNumber of Group Address frames received without error by this
NMM. Note: The NMM counts only Group Address frames that are
addressed to its own Group Address(es).ro Counter .1.3.6.1.4.1.45.1.3.3.4.8 |
s3TrNmmRing1or2Determines which ring the NMM is currently using on the
concentrator backplane.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.9 |
s3TrNmmRingSpeedToken Ring speed.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.10 |
s3TrNmmHexDisplay4 octet hex display string that is displayed on the NMM
control panel.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.4.11 |
s3TrNmmEpromSizeThe size of the EPROM in the NMM memory map.ro Enumeration .1.3.6.1.4.1.45.1.3.3.4.12 |
s3000TrNode OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.5 |
s3TrNodeTableTable containing station specific information. SEQUENCE OF S3TrNodeEntry .1.3.6.1.4.1.45.1.3.3.5.1 |
s3TrNodeEntryEntry in the table containing counters and profiling
information for each node detected on the local token ring. S3TrNodeEntry .1.3.6.1.4.1.45.1.3.3.5.1.1 |
s3TrNodeEntMacAddressMAC address of node that this entry in the table is for.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.1 |
s3TrNodeEntStatusTells whether the station is currently beaconing or not.ro Enumeration .1.3.6.1.4.1.45.1.3.3.5.1.1.4 |
s3TrNodeEntNodeStatusNode status as defined in 802.5 specification
(section 3.3.2.18).ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.5 |
s3TrNodeLineErrsNumber of line errors. Section 3.8.1 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.6 |
s3TrNodeBurstErrsNumber of burst errors. Section 3.8.3 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.7 |
s3TrNodeAriFciErrsNumber of ARI FCI errors. See AC errors, Section 3.8.4 of
IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.8 |
s3TrNodeLostFramesNumber of frames lost. Section 3.8.6 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.9 |
s3TrNodeRcvCongestErrsNumber of receive congestion errors. Section 3.8.7 of IEEE
802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.10 |
s3TrNodeFrmCopyErrsNumber of frame copy errors. Section 3.8.8 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.11 |
s3TrNodeTokenErrsNumber of token errors. Section 3.8.10 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.12 |
s3TrNodeInternalErrsNumber of internal errors. Section 3.8.2 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.13 |
s3TrNodeAbortTransErrsNumber of abort delimiter transmitted errors. Section 3.8.5
of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.14 |
s3TrNodeFrequencyErrsNumber of frequency errors. Section 3.8.9 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.15 |
s3TrNodeEntProductIdA brief string describing the product specified by the vendor.
Section 3.3.2.14 of IEEE 802.5 specification. The characters
in the string are represented in EBCDIC for IBM products, in
ASCII for others.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.16 |
s3TrNodeEntUnaThe Upstream Neighbor Address. Section 3.3.2.15 of IEEE
802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.17 |
s3TrNodeEntNodeVersionString that represents the version of the station software.
Section 3.3.2.17 of IEEE 802.5 specification. The characters
in the string are represented in EBCDIC for IBM products, in
ASCII for others.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.18 |
s3TrNodeEntPhysDropThis reports the physical location of this node on the ring.
Section 3.3.2.13 of IEEE 802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.19 |
s3TrNodeEntFuncAddrSpecifies the functional addresses used by this station.
Section 3.3.2.8 of IEEE 802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.20 |
s3TrNodeEntAuthFuncClassThis specifies the functional classes that are allowed to be
active in the station. Section 3.3.2.3 of IEEE 802.5
specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.21 |
s3TrNodeEntAuthAccPriorityThe maximum priority this station is allowed to use. Section
3.3.2.2 of IEEE 802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.22 |
s3TrNodeEntGrpAddrThis contains the group address of this station. Section
3.3.2.9 of IEEE 802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.23 |
s3TrNodeEntStationIdThis string is used to uniquely identify the station. It may
be equal to the station's MAC address. Section 3.3.2.21 of
IEEE 802.5 specification.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.5.1.1.24 |
s3TrNodeEntBeaconTypeThis specifies the type of beacon frame seen. Section
3.3.2.4 of IEEE 802.5 specification.ro Enumeration .1.3.6.1.4.1.45.1.3.3.5.1.1.25 |
s3TrNodeBeaconCntNumber of beacon frames that have been sent by this station.ro Counter .1.3.6.1.4.1.45.1.3.3.5.1.1.26 |
s3TrNodeLastBeaconTimeThe time of the last beacon frame sent by this station.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.3.5.1.1.27 |
s3TrNodeLastInsertTimeThe time of the last ring insertion by this station. Time is
relative from the system uptime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.3.5.1.1.28 |
s3TrNodeFirstInsertTimeThe time of the first ring insertion by this station. Time
is relative from the system uptime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.3.5.1.1.29 |
s3TrNodeLastDeinsertTimeThe time of the last ring deinsertion by this station. Time
is relative from the system uptime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.3.5.1.1.30 |
s3TrNodeRemoveStationRemoves the MAC address associated with this entry from the
ring by sending a REMOVE MAC frame if this object is written
to with remove(2).rw Enumeration .1.3.6.1.4.1.45.1.3.3.5.1.1.31 |
s3000TrRing OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.7 |
s3TrRingStats OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.3.3.7.1 |
s3TrRingStatusThe status of the ring.ro Enumeration .1.3.6.1.4.1.45.1.3.3.7.1.1 |
s3TrRingFrmsRxOkNumber of frames received successfully by the NMM.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.2 |
s3TrRingOctetsRxOkNumber of octets received successfully by the NMM.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.3 |
s3TrRingBcastFrmsRxOkNumber of broadcast frames received successfully by the NMM.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.4 |
s3TrRingLineErrsNumber of line errors. Section 3.8.1 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.5 |
s3TrRingBurstErrsNumber of burst errors. Section 3.8.3 of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.6 |
s3TrRingAriFciErrsNumber of ARI FCI errors. See AC errors, Section 3.8.4 of
IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.7 |
s3TrRingLostFramesNumber of frames lost. Section 3.8.6 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.8 |
s3TrRingRcvCongestErrsNumber of receive congestion errors. Section 3.8.7 of IEEE
802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.9 |
s3TrRingFrmCopyErrsNumber of frame copy errors. Section 3.8.8 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.10 |
s3TrRingTokenErrsNumber of token errors. Section 3.8.10 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.11 |
s3TrRingInternalErrsNumber of internal errors. Section 3.8.2 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.12 |
s3TrRingAbortTransErrsNumber of abort delimiter transmitted errors. Section 3.8.5
of IEEE 802.5 specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.13 |
s3TrRingFrequencyErrsNumber of frequency errors. Section 3.8.9 of IEEE 802.5
specification.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.14 |
s3TrRingBeaconCntNumber of beacon frames that have been seen.ro Counter .1.3.6.1.4.1.45.1.3.3.7.1.15 |
s3TrRingBeaconTypeThis specifies the type of beacon frame seen. Section
3.3.2.4 of IEEE 802.5 Specification.ro Enumeration .1.3.6.1.4.1.45.1.3.3.7.1.16 |
s3TrRingLastBeaconTimeThe time of the last beacon frame sent on the ring. Time is
relative from the system uptime.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.45.1.3.3.7.1.17 |
s3TrRingBeaconStationThe MAC address of station last beaconing.ro OCTET STRING .1.3.6.1.4.1.45.1.3.3.7.1.18 |