SW-VLAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SW-VLAN-MIB.
47
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
47 total| Object Name |
|---|
marconi OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
IMPORTS Unknown .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
external OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20 |
dlink OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1 |
dlinkcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.1 |
golf OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2 |
golfproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1 |
es2000 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1.3 |
golfcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2 |
marconi-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2 |
es2000Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28 |
swL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 |
swVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8 |
swVlanCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.1 |
swVlanCtrlModeThis object controls which Vlan function will be enable (or disable)
when the switch hub restart at the startup (power on) or warm
start.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.1.1 |
swVlanInfoStatusThis object indicates which Vlan function be enable (or disable)
in mandatoryly stage. There are no effect when change swVlanCtrlMode
vlaue in the system running.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.1.2 |
swVlanSnmpPortVlanIndicates the Vlan which the SNMP port belongs to.
The value range is 1 to 4094.ro VlanIndex .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.1.3 |
swMacBaseVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2 |
swMacBaseVlanInfo OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.1 |
swMacBaseVlanMaxNumThe maximum number of Mac base Vlan allowed by the system.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.1.1 |
swMacBaseVlanAddrMaxNumThe maximum number of entries in Mac-based Vlan address table.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.1.2 |
swMacBaseVlanCtrlTableA table that contains information about MAC base Vlan
entries for which the switch has forwarding and/or filtering
information. This information is used by the transparent switching
function in determining how to propagate a received frame. SEQUENCE OF SwMacBaseVlanCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.2 |
swMacBaseVlanCtrlEntryA list of information about a specific MAC base Vlan configuration
portlist for which the switch has some forwarding and/or filtering
information. SwMacBaseVlanCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.2.1 |
swMacBaseVlanDescA textual description of the Mac Base Vlan for memorization.
The string cannot set to empty string. There is a default value for this string.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.2.1.1 |
swMacBaseVlanMacMemberThis object indicates the total number of MAC addresses contained
in the VLAN entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.2.1.2 |
swMacBaseVlanCtrlStateThis object indicates the MacBase Vlan state.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.2.1.3 |
swMacBaseVlanAddrTableA table that contains information about unicast or multicast
entries for which the switch has forwarding and/or filtering
information. This information is used by the transparent switching
function in determining how to propagate a received frame. Note that
the priority of MacBaseVlanAddr table entries is lowest than Filtering
Table and FDB Table, i.e. if there is a table hash collision between
the entries of MacBaseVlanAddr Table and Filtering Table inside the
switch H/W address table, then Filtering Table entry overwrite the
colliding entry of MacBaseVlanAddr Table. This state is same of FDB
table. See swFdbFilterTable and swFdbStaticTable description also. SEQUENCE OF SwMacBaseVlanAddrEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3 |
swMacBaseVlanAddrEntryA list of information about a specific unicast or multicast MAC
address for which the switch has some forwarding and/or filtering
information. SwMacBaseVlanAddrEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3.1 |
swMacBaseVlanAddrThis object indictaes a unicast or multicast MAC address for which
the bridge has forwarding and/or filtering information.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3.1.1 |
swMacBaseVlanAddrVlanDescA textual description of the Mac Base Vlan for memorization.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3.1.2 |
swMacBaseVlanAddrStateThis object indicates the MacBase Vlan Address entry state.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
invalid(2) - writing this value to the object, and then the corresponding
entry will be removed from the table.
valid(3) - this entry is reside in the table.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3.1.3 |
swMacBaseVlanAddrStatusThis object indicates the MacBase Vlan Address entry state.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
apply(2) - this entry is currently in use and reside in the table.
not-apply(3) - this entry is reside in the table but currently not
in use due to conflict with filter table.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.2.3.1.4 |
swPortBaseVlan OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3 |
swPortBaseVlanTotalNumThe total number of Port-Base Vlan which is in enabled state
within this switch hub.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.1 |
swPortBaseVlanDefaultVlanTableA table that contains default Port-Based VLAN list entries for the
switch. The entry (Vid = 1,i.e. swPortBaseVlanDefaultPvid = 1) is
defalut Port-Based VLAN , maintained by system. SEQUENCE OF SwPortBaseVlanDefaultVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2 |
swPortBaseVlanDefaultVlanEntryA list of default Port-Based VLAN information in
swPortBaseVlanDefaultVlanTable. SwPortBaseVlanDefaultVlanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2.1 |
swPortBaseVlanDefaultPvidThis object indicates the default Port-Base Vlan ID. It occupies only
1 entry in VLAN table, with VID=1.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2.1.1 |
swPortBaseVlanDefaultDescA textual description of the Port-Base Vlan.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2.1.2 |
swPortBaseVlanDefaultPortListThis object indicates the port member set of the specified Vlan.
Each Vlan has a octect string to indicate the port map. The most
significant bit represents the lowest numbered port, and the
least significant bit represents the highest numbered port.ro PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2.1.3 |
swPortBaseVlanDefaultPortNumberThis object indicates the number of ports of the entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.2.1.4 |
swPortBaseVlanConfigTableA table that contains Port-Based VLAN list entries for the switch.
The device can't support port overlapping in Port-Based VLAN. SEQUENCE OF SwPortBaseVlanConfigEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3 |
swPortBaseVlanConfigEntryA list of information about a specific Port-Based VLAN configuration
in swPortBaseVlanConfigTable. SwPortBaseVlanConfigEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3.1 |
swPortBaseVlanConfigPvidThis object indicates the Port-Base Vlan ID. There are up to 11 entries
for current product now. The object range varies from 2 to 12.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3.1.1 |
swPortBaseVlanConfigDescA textual description of the Port-Base Vlan. It cannot be a null string.
And each description must be unique in the table.rw DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3.1.2 |
swPortBaseVlanConfigPortListThis object indicates which ports are belong to the Vlan. Each Vlan
has a octect string to indicate with port map. The most significant
bit represents the lowest numbered port, and the least significant
bit represents the highest numbered port.rw PortList .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3.1.3 |
swPortBaseVlanConfigPortNumberThis object indicates the number of ports of the entry.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.8.3.3.1.4 |