SW-TRAP
Standard SNMP MIB module defining data structures for SW-TRAP.
Imported Objects
Objects
4 total| Object Name |
|---|
SW-MIBA swFault(1) is generated whenever the diagnostics
detects a fault with the switch. TRAP-TYPE .1.3.6.1.4.1.1588.2.1.1.1.0.1 |
swSensorScnA swSensorScn(2) is generated whenever an
environment sensor changes its operational state. For instance,
a fan stop working. The VarBind in the Trap Data Unit shall
contain the corresponding instance of the sensor
status, sensor index, sensor type, sensor value (reading)
and sensor information. Note that the sensor information
contains the type of sensor and its number in textual format. TRAP-TYPE .1.3.6.1.4.1.1588.2.1.1.1.0.2 |
swFCPortScnA swFCPortScn(3) is generated whenever an FC_Port
changes its operational state. For instance, the FC_Port
goes from on-line to offline. The VarBind in the Trap Data
Unit shall contain the corresponding instance of the
FC_Port's operational status and index. TRAP-TYPE .1.3.6.1.4.1.1588.2.1.1.1.0.3 |
swEventTrapThis trap is generated when an event whose
level at or below swEventTrapLevel occurs. TRAP-TYPE .1.3.6.1.4.1.1588.2.1.1.1.0.4 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.