BROCADE-MPLS-MIB
AI MIB Summary
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
This is Extreme's proprietary MIB module for Multi-Protocol Label Switched Paths. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved. This Extreme Networks SNMP Management Information Base Specification embodies Extreme Networks' confidential and proprietary intellectual property. Extreme Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Extreme Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
brocadeMplsMIB.1.3.6.1.4.1.1588.3.1.10
64
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
64 total| Object Name |
|---|
brocadeMplsMIBThis is Extreme's proprietary MIB module for Multi-Protocol Label Switched Paths. Copyright (c) 2018 Extreme Networks, Inc. All rights reserved. This Extreme Networks SNMP Management Information Base Specification embodies Extreme Networks' confidential and proprietary intellectual property. Extreme Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Extreme Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.1588.3.1.10 |
bcsiMplsNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.0 |
bcsiMplsLspUpNotificationAn bcsiMplsLspUpNotification trap signifies that the specified LSP is up. The current active path for the LSP is bcsiMplsLspPathName. NOTIFICATION-TYPE .1.3.6.1.4.1.1588.3.1.10.0.1 |
bcsiMplsLspDownNotificationAn bcsiMplsLspDownNotification trap signifies that the specified LSP is down, because the current active path bcsiMplsLspPathName went down. NOTIFICATION-TYPE .1.3.6.1.4.1.1588.3.1.10.0.2 |
bcsiMplsLspChangeNotificationAn bcsiMplsLspChangeNotification trap signifies that the the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the switch over NOTIFICATION-TYPE .1.3.6.1.4.1.1588.3.1.10.0.3 |
bcsiMplsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.1 |
bcsiMplsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.1.1 |
bcsiMplsVersionMPLS version number.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.1.1 |
bcsiMplsAdminGroupTableList of administrative groups (by ID) that have a configured group name. SEQUENCE OF BcsiMplsAdminGroupEntry .1.3.6.1.4.1.1588.3.1.10.1.1.2 |
bcsiMplsAdminGroupEntryInformation about an administrative group entry. BcsiMplsAdminGroupEntry .1.3.6.1.4.1.1588.3.1.10.1.1.2.1 |
bcsiMplsAdminGroupIdIdentifies the administrative group ID in 1-based. The end user of this object must convert this to 0-based since this maps to the bit position in the constraint-based link selection. Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.1 |
bcsiMplsAdminGroupNameThe group name that this administrative group is associated with.rw DisplayString .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.2 |
bcsiMplsAdminGroupRowStatusThe row status of an entry. Note: Set request to this table is not supported in this release. Always returns 'active' for the existing entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.1.2.1.3 |
bcsiMplsInterfaceTableList of MPLS-enabled Interfaces. SEQUENCE OF BcsiMplsInterfaceEntry .1.3.6.1.4.1.1588.3.1.10.1.1.3 |
bcsiMplsInterfaceEntryInformation about an MPLS interface entry. BcsiMplsInterfaceEntry .1.3.6.1.4.1.1588.3.1.10.1.1.3.1 |
bcsiMplsInterfaceIndexThe ifIndex of the MPLS-enabled port or VE interface. Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.1 |
bcsiMplsInterfaceAdminGroupSpecifies which administrative groups this MPLS-enabled interface belongs to.rw MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.2 |
bcsiMplsInterfaceRowStatusThe row status of an entry. Note: Set request to this table is not supported in this release. Always returns 'active' for the existing entries.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.1.3.1.3 |
bcsiMplsLspInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.1.2 |
bcsiMplsConfiguredLspsNumber of configured LSPs. Sum of RSVP and static configured LSPs. DEPRECATED BY mplsTunnelConfigured IN rfc3812-MPLS-TE-STD-MIB.rodeprecated Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.1 |
bcsiMplsActiveLspsNumber of active LSPs. Sum of RSVP, LDP and static LSPs. DEPRECATED BY mplsTunnelActive IN rfc3812-MPLS-TE-STD-MIB.rodeprecated Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.2 |
bcsiMplsLspTableList of Configured Label Switched Paths. SEQUENCE OF BcsiMplsLspEntry .1.3.6.1.4.1.1588.3.1.10.1.2.3 |
bcsiMplsLspEntryEntry containing information about a particular Label Switched Path. BcsiMplsLspEntry .1.3.6.1.4.1.1588.3.1.10.1.2.3.1 |
bcsiMplsLspSignalingProtoMPLS signaling protocol used by this LSP. Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.1 |
bcsiMplsLspIndexThe unique index of the LSP in the system for a given signaling protocol. Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.2 |
bcsiMplsLspNameName of the Label Switched Path.ro DisplayString .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.3 |
bcsiMplsLspStateThe operational state of the LSP.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.4 |
bcsiMplsLspPacketsThe number of egress Layer-3 VPN and IPoMPLS packets meeting the in-label and tunnel criteria.ro Counter64 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.5 |
bcsiMplsLspAgeThe age, since creation of this LSP in 10-millisecond periods.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.6 |
bcsiMplsLspTimeUpThe total time in 10-millisecond units that this LSP has been operational. The percentage up time can be determined by computing (bcsiMplsLspTimeUp/bcsiMplsLspAge * 100 %).ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.7 |
bcsiMplsLspPrimaryTimeUpThe total time in 10-millisecond units that this LSP's primary path has been operational. The percentage contribution of the primary path to the operational time is given by (bcsiMplsLspPrimaryTimeUp/bcsiMplsLspTimeUp * 100) %.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.8 |
bcsiMplsLspTransitionsThe number of state transitions (up -> down and down -> up) this LSP has undergone.ro Counter32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.9 |
bcsiMplsLspLastTransitionThe time in 10-millisecond units since the last transition occurred on this LSP.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.10 |
bcsiMplsLspFromSource IP address of this LSP.ro IpAddress .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.11 |
bcsiMplsLspToDestination IP address of this LSP.ro IpAddress .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.12 |
bcsiMplsLspPathNameThe name of the active path for this LSP, if any. If there is none, the name should be empty; in that case, the rest of the fields in bcsiMplsLspEntry are meaningless.ro DisplayString .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.13 |
bcsiMplsLspPathTypeThe type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless bcsiMplsLspPathName is not emptyro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.14 |
bcsiMplsLspAdaptiveIndicates if the LSP supports adaptive mechanism or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.15 |
bcsiMplsLspBfdSessionIdThe BFD session ID associated to this LSP. Zero indicates there is no BFD session for this LSP. Non-zero value is an index to an entry in the bfdSessTablero Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.16 |
bcsiMplsLspReoptimizeTimerThe number of seconds from the beginning of one reoptimization attempt to the beginning of the next attempt.ro Unsigned32 ( 0 | 300..65535 ) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.17 |
bcsiMplsLspCoSThe Class of Service for this LSP.ro ClassOfService .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.18 |
bcsiMplsLspHopLimitThe number of hops this LSP can traverse.ro Unsigned32 ( 0..255 ) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.19 |
bcsiMplsLspCspfIndicates if CSPF path calculation is enabled on this LSP.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.20 |
bcsiMplsLspCspfTieBreakerThe tie-breaker to use for selecting CSPF equal-cost paths. The value of this variable is meaningless if the bcsiMplsLspCspf is 'disabled'.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.21 |
bcsiMplsLspFrrModeIndicates which protection method is to be used for Fast Reroute. 'detour' means one-to-one backup and 'facility' for facility backup.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.22 |
bcsiMplsLspFrrSetupPriorityThe setup priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.23 |
bcsiMplsLspFrrHoldingPriorityThe hold priority for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.24 |
bcsiMplsLspFrrHopLimitThe hop limit for MPLS Fast Reroute. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro Unsigned32 ( 0..255 ) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.25 |
bcsiMplsLspFrrBandwidthThe bandwidth constraint for MPLS Fast Reroute. The value 0 means that the detour route uses a best-effort value for bandwidth. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.26 |
bcsiMplsLspFrrAdmGrpIncludeAnyThe administrative group setting that the device includes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.27 |
bcsiMplsLspFrrAdmGrpIncludeAllThe administrative group setting that an interface must be a member of to be considered in a detour route for the LSP. Any interface that is not a member of all the groups is eliminated from consideration. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.28 |
bcsiMplsLspFrrAdmGrpExcludeAnyThe administrative group setting that the device excludes any of the interfaces that are members of the group when calculating detour routes for this LSP. The value of this variable is meaningless if the bcsiMplsLspFrrMode is 'none'.ro MplsTunnelAffinity (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.29 |
bcsiMplsLspPathSelectModeIndicates the path selection mode to use. Auto-select is the default mode. I this mode, the primary path is always selected to carry traffic when the primary path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For manual-select, traffic is switched to a user- selected path specified in bcsiMplsLspPathSelectPathname after the selected path has stayed operating in the working state for at least the amount of time specified in bcsiMplsLspPathSelectRevertTimer. For unconditional-select, traffic is switched to and stays on the selected path regardless of the path's condition even if it is in a failure state.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.30 |
bcsiMplsLspPathSelectPathnameThe user-selected pathname when the bcsiMplsLspPathSelectMode is either 'manual' or 'unconditional'.ro DisplayString .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.31 |
bcsiMplsLspPathSelectRevertTimerThe number of seconds to wait after the primary or selected path comes up before traffic reverts to that path. A value of 0 indicates that it will switch immediately after the current working path goes down.ro Unsigned32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.32 |
bcsiMplsLspShortcutOspfAllowedIndicates that this LSP allows shortcut between nodes in an AS. OSPF includes the LSP in its SPF calculation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.33 |
bcsiMplsLspShortcutIsisAllowedIndicates that this LSP allows shortcut through the network to a destination based on the path's cost (metric). Traffic is forwarded through this LSP to destinations within the IS-IS routing domain. IS-IS includes the LSP in its SPF calculation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.34 |
bcsiMplsLspShortcutIsisLevelIndicates the level of IS-IS routing enabled on the device. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'.ro Enumeration .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.35 |
bcsiMplsLspShortcutIsisAnnounceIndicates that this IS-IS shortcut will be announced or advertised. The metric to announce is specified by bcsiMplsLspShortcutIsisAnnounceMetric. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.36 |
bcsiMplsLspShortcutIsisAnnounceMetricIndicates the metric value to announce for this shortcut. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAnnounce is 'false'. Default value is 10.ro Integer32 .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.37 |
bcsiMplsLspShortcutIsisRelativeMetricIndicates the relative metric used to compute the LSP cost when announce is not enabled. The value of this variable is meaningless if the bcsiMplsLspShortcutIsisAllowed is 'false'.ro Integer32 (-16777215..16777215) .1.3.6.1.4.1.1588.3.1.10.1.2.3.1.38 |
bcsiMplsVllInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.1.3 |
bcsiMplsVplsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.1.4 |
bcsiMplsConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1588.3.1.10.2 |