SW-LAYER2-PORT-MANAGEMENT-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SW-LAYER2-PORT-MANAGEMENT-MIB.
76
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
76 total| Object Name |
|---|
marconi OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
RFC1155-SMI Unknown .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
external OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20 |
dlink OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1 |
dlinkcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.1 |
golf OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2 |
golfproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1 |
es2000 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1.3 |
swEventPortPartitionThe trap is sent whenever the port state enter the Partion mode
when more than 61 collisions occur while trasmitting. TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.3.0.1 |
swEventlinkChangeEventThe trap is sent whenever the link state of a port changes from
link up to link down or from link down to link up TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.3.0.2 |
swEventBcastRisingStormThe trap indicates that broadcast higher rising threshold.
This trap including the port ID TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.3.0.3 |
swEventBcastFallingStormThe trap indicates that broadcast higher falling threshold.
This trap including the port ID TRAP-TYPE .1.3.6.1.4.1.326.2.20.1.2.1.3.0.4 |
golfcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2 |
marconi-products OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1 |
marconi-es2000Prod OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.28 |
swProperty OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.1.28.1 |
marconi-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2 |
es2000Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28 |
swL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 |
swL2PortMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4 |
swL2PortInfoTableA table that contains information about every port. SEQUENCE OF SwL2PortInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1 |
swL2PortInfoEntryA list of information for each port of the device. SwL2PortInfoEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1 |
swL2PortInfoUnitIndexIndicates ID of the unit in the device.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.1 |
swL2PortInfoModuleIndexIndicates ID of the module on the unit.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.2 |
swL2PortInfoIndexIndicates ID of the port on the module.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.3 |
swL2PortInfoTypeIndicates the connector type of this port.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.4 |
swL2PortInfoDescrProvides port type information in displayed string format.ro DisplayString .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.5 |
swL2PortInfoLinkStatusIndicates port link status.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.6 |
swL2PortInfoNwayStatusThis object indicates the port speed and duplex mode.ro Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.1.1.7 |
swL2PortCtrlTableA table that contains control information about every port. SEQUENCE OF SwL2PortCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2 |
swL2PortCtrlEntryA list of control information for each port of the device. SwL2PortCtrlEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1 |
swL2PortCtrlUnitIndexIndicates ID of the unit in the device.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.1 |
swL2PortCtrlModuleIndexIndicates ID of the module on the unit.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.2 |
swL2PortCtrlIndexThis object indicates the device port number.(1..Max port number).ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.3 |
swL2PortCtrlAdminStateThis object decides the port to be enabled or disabled.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.4 |
swL2PortCtrlLinkStatusAlarmStateDepends on this object to determine to send a trap or
not when link status changes.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.5 |
swL2PortCtrlNwayStateChooses the port speed, duplex mode, and N-Way function mode.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.6 |
swL2PortCtrlFlowCtrlStateSets IEEE 802.3x compliant flow control function as enabled or disabled.
And IEEE 802.3x compliant flow control function work only when the port
is in full duplex mode.The setting is effective the next time you reset
or power on the hub.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.7 |
swL2PortCtrlBackPressStateDepends on this object to determine to enable or disable the
backpressure function when the port is working in half duplex mode.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.8 |
swL2PortCtrlLockStateThe state of this entry. The meanings of the values are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disable(2) - Port lock funtion disable.
enable(3) - Locking a port provides the CPU with the ability to
decide which address are permitted to reside on such
port, who knows about these address, and unknown packet
forwarding to/from such ports. This is a way to prevent
undesired traffic from being received or transmmited on
the port.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.9 |
swL2PortCtrlPriorityThe priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
default(2) - A packet is normally classified as low priority,
unless at least one of the following is true:
(a)The packet contained a TAG (per 802.1Q definition)
with the priority greater or equal to 4.
(b)The address-table entry for the destination address
had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority.
force-high_priority(4) - A packet is normally classified as high priority.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10 |
swL2PortCtrlStpStateThe state of STP(spanning tree algorithm) operation on this port.
That's meaning the port whether add in the STP. The value enabled(3)
indicates that STP is enabled on this port, as long as swDevCtrlStpState
is also enabled for this device. When disabled(2) but swDevCtrlStpState
is still enabled for the device, STP is disabled on this port : any
BPDU packets received will be discarded and no BPDU packets will be
propagated from the port.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.11 |
swL2PortCtrlHOLStateThe object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to a
blocking port. The idea relies on the assumption that it is better
to discard packets destined to blocking ports, then to let them
consume more and more buffers in the input-port's Rx-counters
because eventually these input ports may become totally blocked.
The meanings of the values are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disabled(2) - HOL function disable.
enabled(3) - HOL function enable.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.12 |
swL2PortCtrlBcastRisingActThis object indicates the system action when broadcast storm
rising threshold is met.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
do-nothing(2) - no action.
blocking(3) - the port can discard any coming broadcast frame.
blocking-trap(4) - the port can discard any coming broadcast frame.
And the device can send a broadcast rising trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.13 |
swL2PortCtrlBcastFallingActThis object indicates the device action when broadcast storm
falling threshold is met.
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
do-nothing(2) - no action.
forwarding(3) - the port has returned to normal operation mode.
forwarding-trap(4) - the port has returned to normal operation mode.
And the device can send a broadcast falling trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.14 |
swL2PortCtrlClearCounterSets choosed port to clear counter.
First of all, any unsigned integer can be used to set.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.15 |
swL2PortStTableA list of port statistic Counter entries. SEQUENCE OF SwL2PortStEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3 |
swL2PortStEntryThis entry include all the port statistic Counter which support
by the device, like Bytes received, Bytes Sent ... SwL2PortStEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1 |
swL2PortStUnitIndexIndicates ID of the unit in the device.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.1 |
swL2PortStModuleIndexIndicates ID of the module on the unit.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.2 |
swL2PortStIndexThis object indicates the device port number.(1..Max port number)ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.3 |
swL2PortStByteRxswDevCtrlCounterMode = 2(switched-frames) : This counter is
incremented once for every data octet of good packets(unicast +
multicast + broadcast) received.
swDevCtrlCounterMode = 3(all-frames) : This counter is incremented
once for every data octet of good packets(unicast + multicast +
broadcast packets) and for local and dropped packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.4 |
swL2PortStByteTxThis counter is incremented once for every data octet of a
transmitted good packet.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.5 |
swL2PortStFrameRxswDevCtrlCounterMode = 2(switched-frames) : This counter is
incremented once for every good packet(unicast + multicast +
broadcast) received.
swDevCtrlCounterMode = 3(all-frames) : This counter is incremented
once for every good packet(unicast + multicast + broadcast packets)
and for local and dropped packets received.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.6 |
swL2PortStFrameTxThis counter is incremented once for every transmitted good packet.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.7 |
swL2PortStTotalBytesRxThis counter is incremented once for every data octet of all received
packets. This include data octets of rejected and local packets
which are not forwarded to the switching core for transmission.
This counter should reflect all the data octets received on the line.
Note: A nibble is not counted as a whole byte.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.8 |
swL2PortStTotalFramesRxThis counter is incremented once for every received packets. This
include rejected and local packets which are not forwarded to the
switching core for transmission. This counter should reflect all
packets received on the line.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.9 |
swL2PortStBroadcastFramesRxswDevCtrlCounterMode = 2(switched-frames) : This counter is
incremented once for every good broadcast packet received.
swDevCtrlCounterMode = 3(all-frames) : This counter is incremented
once for every good broadcast packet received and for local and
dropped broadcast packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.10 |
swL2PortStMulticastFramesRxswDevCtrlCounterMode = 2(switched-frames) : This counter is
incremented once for every good multicast packet received.
swDevCtrlCounterMode = 3(all-frames) : This counter is incremented
once for every good multicast packet received and for local and
dropped multicast packets. This counter does not include broadcast
packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.11 |
swL2PortStCRCErrorThis counter is incremented once for every received packet which
meets all the following conditions:
1. Packet data length is between 64 and 1536 bytes inclusive.
2. Packet has invalid CRC.
3. Collision event, late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.12 |
swL2PortStOversizeFramesThe number of good frames with length more than 1536 bytes.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.13 |
swL2PortStFragmentsThis counter is incremented once for every received packet which
meets all the following conditions:
1. Packet data length is less than 64 bytes or packet withourt SFD
and is less than 64 bytes in length.
2. Packet has invalid CRC.
3. Collision event, late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.14 |
swL2PortStJabberThe number of frames with length more than 1536 bytes and with
CRC error or misaligned.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.15 |
swL2PortStCollisionThe number of Collisions.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.16 |
swL2PortStLateCollisionThe number of Late Collision(collision occurring later than
576th transmitted bit).ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.17 |
swL2PortStFrames-64-bytesThis counter is incremented once for every received and transmitted
packet with size of 64 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.18 |
swL2PortStFrames-65-127-bytesThis counter is incremented once for every received and transmitted
packet with size of 65 to 127 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.19 |
swL2PortStFrames-128-255-bytesThis counter is incremented once for every received and transmitted
packet with size of 128 to 255 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.20 |
swL2PortStFrames-256-511-bytesThis counter is incremented once for every received and transmitted
packet with size of 256 to 511 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.21 |
swL2PortStFrames-512-1023-bytesThis counter is incremented once for every received and transmitted
packet with size of 512 to 1023 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.22 |
swL2PortStFrames-1024-1536-bytesThis counter is incremented once for every received and transmitted
packet with size of 1024 to 1536 bytes. This counter includes rejected
received and transmitted packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.23 |
swL2PortStFramesDroppedFramesThis counter is incremented once for every received dropped packet.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.24 |
swL2PortStMulticastFramesTxThe number of multicast frames sent. This counter does not include
broadcast packets.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.25 |
swL2PortStBroadcastFramesTxThe number of broadcast frames sent.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.26 |
swL2PortStUndersizeFramesThis counter is incremented once for every received packet which
meets all the following conditions:
1. Packet data length is less than 64 bytes.
2. Packet has valid CRC.
3. Collision event, late collision event and receive error event
have not been detected.ro Counter .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.3.1.27 |