SW-COMMON-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for SW-COMMON-MIB.
38
Objects
Active
Status
2
Dependencies
Imported Objects
Objects
38 total| Object Name |
|---|
marconi OBJECT IDENTIFIER .1.3.6.1.4.1.326 |
IMPORTS Unknown .1.3.6.1.4.1.326 |
systems OBJECT IDENTIFIER .1.3.6.1.4.1.326.2 |
external OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20 |
dlink OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1 |
dlinkcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.1 |
golf OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2 |
golfproducts OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1 |
es2000 OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.1.3 |
golfcommon OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2 |
marconi-mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2 |
es2000Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28 |
swL2Mgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2 |
swL2DevMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1 |
swL2DevCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1 |
swL2DevCtrlStpStateThis object can be enabled or disabled spanning tree algorithm
during runtime of the system.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.1 |
swL2DevCtrlPartitionModeStateThis object used to enable or disable port auto partition. When the
object apply for all ports of the device.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.2 |
swL2DevCtrlTableLockStateThis object indicates whether the address table is locked.
In other words, the address table doesn't learn any more new address.
The aging timer is suspended when the address table is locked.
As long as the table is locked, all of the frames are dropped if the
destination can not be found in the address.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.3 |
swL2DevCtrlHOLStateThe object provides a way to prevent HOL (Head Of Line) blocking
between ports. HOL protection may prevent forwarding a packet to
a blocking port. The idea relies on the assumption that it is
better to discard packets destined to blocking ports, then to let
them consume more and more buffers in the input-port's Rx-counters
because eventually these input ports may become totally blocked.
The meanings of the values are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disabled(2) - HOL function disable for device.
enabled(3) - HOL function enable for device.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.4 |
swL2DevCtrlAddrLookupModesAndHitRateAccording to the differnet address looke mode setting, to enlarge the
address table size is possible in device. But there is side effect
as the higher level you have, the lower thorughput device has. That
means Level 0 get the smallest table size, but get better performace.
We recommand the user use the Level 1 as defualt setting.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.5 |
swL2DevCtrlBuzzerStateControls buzzer state to be disabled or enabled.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.6 |
swL2DevCtrlBuzzerTestTests buzzer to bibi. First of all, any unsigned integer can be used to set.rw INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.1.7 |
swL2DevAlarm OBJECT IDENTIFIER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2 |
swL2DevAlarmPartitionDepending on this object, the device send a trap or not when
any one of the device's ports was partitioned.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.1 |
swL2DevAlarmNewRootWhen the device has become the new root of the Spanning Tree, this
object decide whether to send a new root trap.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.2 |
swL2DevAlarmTopChangeThis object determines to send a trap or not when the switch topology
was changed. If the object is enabled(3), the topologyChange trap is
sent by the device when any of its configured ports transitions from
the Learning state to the Forwarding state, or from the Forwarding
state to the Blocking state. For the same port tranition, the device
doesn't send the trap if this object value is disabled or other.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.3 |
swL2DevAlarmLinkChangeThis object determines to send a trap or not when the link was changed.
If the object is enabled(3), the Link Change trap is sent by the
device when any of its ports link change. The device doesn't send
the trap if this object value is disabled or other.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.4 |
swL2DevAlarmPowerTableA table that controls error state to bibi about power module. SEQUENCE OF SwL2DevAlarmPowerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5 |
swL2DevAlarmPowerEntryA list of controlling informations for power module. SwL2DevAlarmPowerEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1 |
swL2DevAlarmPowerIndexID of the power module.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.1 |
swL2DevAlarmPowerTemperatureControls temperature error state in power module.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.2 |
swL2DevAlarmPowerVoltControls volt error state in power module.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.3 |
swL2DevAlarmPowerCurrentControls current error state in power module.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.4 |
swL2DevAlarmPowerFanControls fan error state in power module.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.5.1.5 |
swL2DevAlarmSystemFanTableA table that controls error state to bibi about system fans. SEQUENCE OF SwL2DevAlarmSystemFanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6 |
swL2DevAlarmSystemFanEntryA list of controlling informations for system fans. SwL2DevAlarmSystemFanEntry .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1 |
swL2DevAlarmSystemFanIndexID of the system fans.ro INTEGER .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1.1 |
swL2DevAlarmSystemFanStateControls system fan error state.rw Enumeration .1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.1.2.6.1.2 |