SUN-HW-CTRL-MIB
AI MIB Summary
The SUN-HW-CTRL-MIB enables remote management and control of Sun platform hardware components via Integrated Lights Out (ILOM) interfaces, specifically exposing operational states, configuration parameters, and diagnostic data for system controllers and peripheral devices.
SUN-HW-CTRL-MIB.mib Version 1.1 Copyright 2010, by Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. This MIB allows controls for all Sun platform devices using Integrated Lights Out Management.
Main OID:
sunHwCtrlMIB.1.3.6.1.4.1.42.2.175.104
46
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
46 total| Object Name |
|---|
sun OBJECT IDENTIFIER .1.3.6.1.4.1.42 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.42.2 |
ilom OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175 |
sunHwCtrlMIBSUN-HW-CTRL-MIB.mib Version 1.1 Copyright 2010, by Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. This MIB allows controls for all Sun platform devices using Integrated Lights Out Management. MODULE-IDENTITY .1.3.6.1.4.1.42.2.175.104 |
sunHwCtrlMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1 |
sunHwCtrlPowerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1.6 |
sunHwCtrlReservedPSUThe number of Reserved PSU's.rw Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.1 |
sunHwCtrlTotalPSUThe total number of PSU's.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.2 |
sunHwCtrlPowerMgmtTableA table listing additional power management properties. SEQUENCE OF SunHwCtrlPowerMgmtEntry .1.3.6.1.4.1.42.2.175.104.1.6.3 |
sunHwCtrlPowerMgmtEntryAn entry for a power management property. SunHwCtrlPowerMgmtEntry .1.3.6.1.4.1.42.2.175.104.1.6.3.1 |
sunHwCtrlPowerMgmtIDThis is an index for the sunHwCtrlPowerMgmtTable. SunHwCtrlPowerMgmtID .1.3.6.1.4.1.42.2.175.104.1.6.3.1.1 |
sunHwCtrlPowerMgmtNameThis is the name of the power management property.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.104.1.6.3.1.2 |
sunHwCtrlPowerMgmtUnitsThis is the units for the value of the power management property.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.104.1.6.3.1.3 |
sunHwCtrlPowerMgmtValueThis is the value of the power management property.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.42.2.175.104.1.6.3.1.4 |
sunHwCtrlPowerMgmtActualPowerTotal input power consumed in watts. On a rackmount server, total power consumption is the input power consumed by the server. On a blade, this is the input power consumed just by the blade (not including any power consumed by shared components). On a CMM this is the input power consumed by the entire chassis or shelf, all blades, NEMs, fans, etc.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.4 |
sunHwCtrlPowerMgmtPermittedPowerMaximum input power consumption in watts. On a rackmount server, the maximum power consumption is the maximum input power the server guarantees it will consume at any instant. On a blade, this is the maximum input power a blade guarantees it will consume, not including its power load on shared components. On a CMM this is the maximum input power the entire chassis (all blades, NEMs, fans, etc.) will consume at any instant. This value can't be changed directly, but may change based on the power policy and budget, and chassis power capacity.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.5 |
sunHwCtrlPowerMgmtAvailablePowerMaximum input power capacity in watts. Power capacity is the maximum input power the power supplies are capable of consuming. On a blade, this is the amount of power guaranteed available to the blade by the chassis.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.6 |
sunHwCtrlPowerMgmtPolicyIndicates the desired power managment policy.rw SunHwCtrlPowerMgmtPolicy .1.3.6.1.4.1.42.2.175.104.1.6.7 |
sunHwCtrlPowerMgmtBudgetSettings OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1.6.9 |
sunHwCtrlPowerMgmtBudgetWhen reading, the current state of the following budget settings: sunHwCtrlPowerMgmtBudgetMinPowerlimit sunHwCtrlPowerMgmtBudgetPowerlimit sunHwCtrlPowerMgmtBudgetTimelimit sunHwCtrlPowerMgmtBudgetTimelimitActions If unknown(1), the agent could not determine the current state. If disabled(2), the settings are not currently in effect. If enabled(3), the settings are currently in effect. If enabledPostPoweron(4), the settings will take effect after the processor is powered on. When writing, only disabled(2) and enabled(3) are valid values. If set to enabled(3) while the system if powered off, the budget will not be enforced until the system powers on and this will transition to enabledPostPoweron(4). If set to enabled(3) when the current budget settings are not supported, this will transition to disabled(2).rw Enumeration .1.3.6.1.4.1.42.2.175.104.1.6.9.1 |
sunHwCtrlPowerMgmtBudgetMinPowerlimitMinimum value sunHwCtrlPowerMgmtBudgetPowerlimit can be set to. The power capper can control power consumption to fit within as little as this amount of power when the system is powered on.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.9.2 |
sunHwCtrlPowerMgmtBudgetPowerlimitMaximum power consumption in watts.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.9.3 |
sunHwCtrlPowerMgmtBudgetTimelimitGrace period for exceeding the powerlimit once the powerlimit has been achieved, in milliseconds.ro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.9.5 |
sunHwCtrlPowerMgmtBudgetTimelimitActionsList of actions that will occur if the power limit is exceeded and cannot be controlled within the timelimit. hardpoweroff(1) causes a hard power off if the timelimit is exceeded.ro SunHwCtrlPowerMgmtBudgetTimelimitActions .1.3.6.1.4.1.42.2.175.104.1.6.9.6 |
sunHwCtrlPowerMgmtBudgetOK'true' if sunHwCtrlPowerMgmtBudget is 'disabled(2)'. If sunHwCtrlPowerMgmtBudget is 'enabled(3)', sunHwCtrlPowerMgmtBudgetOK will be 'false' if the power consumption has been over the power limit (sunHwCtrlPowerMgmtBudgetPowerlimit) for more than the time limit (sunHwCtrlPowerMgmtBudgetTimelimit), otherwise 'true'. Returns to 'true' when power consumption drops to or below the powerlimit after a violation. This value will also be 'false' if the budget is enabled but the budget settings are not supported. (This could happen if saved budget settings are no longer valid after a reboot.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.6.9.7 |
sunHwCtrlPowerMgmtBudgetCommitPendingCommits the following pending values: sunHwCtrlPowerMgmtBudgetPendingPowerlimit sunHwCtrlPowerMgmtBudgetPendingTimelimit sunHwCtrlPowerMgmtBudgetPendingTimelimitActions May only be set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.6.9.100 |
sunHwCtrlPowerMgmtBudgetPendingPowerlimitWhen committed, the value is applied to sunHwCtrlPowerMgmtBudgetPowerlimit.rw Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.9.103 |
sunHwCtrlPowerMgmtBudgetPendingTimelimitWhen committed, the value is applied to sunHwCtrlPowerMgmtBudgetTimelimit. A value of -1 instructs the system to use its' default value.rw Integer32 (-1..2147483647) UNITS "milliseconds" .1.3.6.1.4.1.42.2.175.104.1.6.9.105 |
sunHwCtrlPowerMgmtBudgetPendingTimelimitActionsWhen committed, the value is applied to sunHwCtrlPowerMgmtBudgetTimelimitActions.rw SunHwCtrlPowerMgmtBudgetTimelimitActions .1.3.6.1.4.1.42.2.175.104.1.6.9.106 |
sunHwCtrlPowerMgmtConsumptionThresholds OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1.6.10 |
sunHwCtrlPowerMgmtConsumptionThreshold1A threshold that determines if ILOM threshold events get generated based on the value of the system power consumption sensor (typically /SYS/VPS). Valid values are 0 (zero) when disabled; greater than 0 generates threshold crossing event.rw Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.10.1 |
sunHwCtrlPowerMgmtConsumptionThreshold2A threshold that determines if ILOM threshold events get generated based on the value of the system power consumption sensor (typically /SYS/VPS). Valid values are 0 (zero) when disabled; greater than 0 generates threshold crossing event.rw Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.10.2 |
sunHwCtrlPowerMgmtSampling OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1.6.11 |
sunHwCtrlPowerMgmtSamplingPeriodSampling period over which sunHwCtrlPowerMgmtSamplingMinimumPower, sunHwCtrlPowerMgmtSamplingMaximumPower and sunHwCtrlPowerMgmtSamplingAveragePower are calculated and reported, in seconds. Supported range and granularity are platform specific.rw Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.11.1 |
sunHwCtrlPowerMgmtSamplingTimestampDate and time at which the power consumption values were calculated.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.6.11.2 |
sunHwCtrlPowerMgmtSamplingMinimumPowerMinimum measured power consumption during most recent sampling period, in wattsro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.11.3 |
sunHwCtrlPowerMgmtSamplingMaximumPowerMaximum measured power consumption during most recent sampling period, in wattsro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.11.4 |
sunHwCtrlPowerMgmtSamplingAveragePowerAverage measured power consumption during most recent sampling period, in wattsro Integer32 .1.3.6.1.4.1.42.2.175.104.1.6.11.5 |
sunHwCtrlTPM OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.1.7 |
sunHwCtrlTpmEnablesunHwCtrlTpmEnable is the principal control for any action being taken to change the access mode(s) of the TPM device. Any attempt to change sunHwCtrlTpmEnable when the host power is on will generate an inconsistentValue (or badValue for SNMPv1) error. When sunHwCtrlTpmEnable is set to false(2), no changes to sunHwCtrlTpmActivate will succeed, and the TPM device will be disabled during the next host power on event. If sunHwCtrlTpmEnable is set to true(1), the TPM device will be enabled during the next host power on. The default state of sunHwCtrlTpmEnable is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.7.1 |
sunHwCtrlTpmActivateIf sunHwCtrlTpmActivate and sunHwCtrlTpmEnable are both currently true(1) during a host power on event, the TPM device will be enabled and activated. If sunHwCtrlTpmActivate is currently false(2) and sunHwCtrlTpmEnable is currently true(1) during a host power on event, the TPM device will be enabled and deactivated. When sunHwCtrlTpmEnable is set to false(2), no changes to sunHwCtrlTpmActivate will succeed. The default state of sunHwCtrlTpmActivate is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.7.2 |
sunHwCtrlTpmForceClearIf sunHwCtrlTpmForceClear and sunHwCtrlTpmEnable are both currently true(1) during a host power on event, the TPM device state will be purged and the state of sunHwCtrlTpmForceClear will return to false(2). If sunHwCtrlTpmForceClear is currently true(1) and sunHwCtrlTpmEnable is currently false(2) during a host power on event, the TPM device will not be enabled, no action is taken with regard to the state of the TPM device, and sunHwCtrlTpmForceClear remains true(1). If sunHwCtrlTpmForceClear is currently false(2) and sunHwCtrlTpmEnable is currently true(1) during a host power on event, the TPM device will be enabled, no action is taken with regard to the state of the TPM device, and sunHwCtrlTpmForceClear remains false(2). When sunHwCtrlTpmEnable is set to false(2), no changes to sunHwCtrlTpmForceClear will succeed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.42.2.175.104.1.7.3 |
sunHwCtrlMIBConformances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.2 |
sunHwCtrlCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.2.1 |
sunHwCtrlGroups OBJECT IDENTIFIER .1.3.6.1.4.1.42.2.175.104.2.2 |
sunHwCtrlObjectsGroupThe group of current objects. Unknown .1.3.6.1.4.1.42.2.175.104.2.2.1 |
More MIBs from Oracle
Browse all OracleMIBs →SUN-ILOM-CONTROL-MIB
SNMP MIB module
390 objects→
SUN-CLUSTER-MIB
SNMP MIB module
314 objects→
KERNEL-READER-SUNMANAGEMENTCENTER-MIB
The KERNEL-READER-SUNMANAGEMENTCENTER-MIB module retrieves kernel-level performance metrics from Sun Management Center agents, specifically monitoring CPU utilization, disk I/O, stream buffer states, virtual memory paging, and swapping rates to enable granular system resource analysis.
293 objects→
READER4U1P-SUNMANAGEMENTCENTER-MIB
Standard SNMP MIB module defining data structures for READER4U1P-SUNMANAGEMENTCENTER-MIB.
245 objects→
READER4UNT-SUNMANAGEMENTCENTER-MIB
Standard SNMP MIB module defining data structures for READER4UNT-SUNMANAGEMENTCENTER-MIB.
243 objects→
SUN-PLATFORM-MIB
The SUN-PLATFORM-MIB extends the ENTITY-MIB to expose Sun Microsystems hardware inventory, revision levels, and containment hierarchies via the `entPhysicalTable` and specific subclass tables like `sunPlatCircuitPackTable`. This module enables SNMP-based discovery and monitoring of physical components such as circuit packs, blades, and chassis units by mapping ITU-T M.3100 and CIM v2.5 managed object attributes to standard SNMP metrics.
228 objects→