SS7I-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
73
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
73 total| Object Name |
|---|
usr OBJECT IDENTIFIER .1.3.6.1.4.1.429 |
RFC1213-MIB Unknown .1.3.6.1.4.1.429 |
nas OBJECT IDENTIFIER .1.3.6.1.4.1.429.1 |
ss7i OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35 |
ss7iCfg OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.1 |
ss7iCfgTableThe Configuration Table contains an entry for each of the
manageable HiPer SS7i cards in the chassis. It contains
objects that reflect the current configuration of
parameters that affect the operation of all the entities
that reside on the given card. SEQUENCE OF Ss7iCfgEntry .1.3.6.1.4.1.429.1.35.1.1 |
ss7iCfgEntryThere is one Configuration Table entry per HiPer SS7i Card
in the chassis. Ss7iCfgEntry .1.3.6.1.4.1.429.1.35.1.1.1 |
ss7iCfgIndexA unique value for each HiPer SS7i card in the chassis.
The value of ss7iCfgIndex matches the value of the index
for the corresponding HiPer SS7i card entity in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.1 |
ss7iCfgIpAddrThe IP address on interface 0 of the HiPer SS7i.rw IpAddress .1.3.6.1.4.1.429.1.35.1.1.1.2 |
ss7iCfgNetmaskThe netmask on interface 0 of the HiPer SS7i.rw IpAddress .1.3.6.1.4.1.429.1.35.1.1.1.3 |
ss7iCfgDfltGwIpAddrThe IP address of the default IP routing gateway.rw IpAddress .1.3.6.1.4.1.429.1.35.1.1.1.4 |
ss7iCfgProtocolThe external signaling protocol running over the TCP/IP
connection with the external signaling gateway. Default =
hss7iSlapV2(1).rw Enumeration .1.3.6.1.4.1.429.1.35.1.1.1.5 |
ss7iCfgGwConnStartMethodThe method used by the HiPer SS7i to bring up the TCP/IP
connection to the external signaling gateway at boot time.rw Enumeration .1.3.6.1.4.1.429.1.35.1.1.1.6 |
ss7iCfgGwIpAddrThe primary external SS7 gateway IP address. Valid for
SLAP only.rw IpAddress .1.3.6.1.4.1.429.1.35.1.1.1.7 |
ss7iCfgGwPortThe primary external SS7 gateway port number. Valid for
SLAP only.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.8 |
ss7iCfgSecGwIpAddrThe secondary external SS7 gateway IP address. Valid for
SLAP only.rw IpAddress .1.3.6.1.4.1.429.1.35.1.1.1.9 |
ss7iCfgSecGwPortThe secondary external SS7 gateway port number. Valid for
SLAP only.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.10 |
ss7iCfgHrtbtTimerNearEndThe HiPer SS7i heartbeat timer. Upon expiration, the HiPer
SS7i will send a heartbeat message to the external SS7
gateway. The time should be less than what the gateway
expects. Valid for SLAP only. Default = 15000 msec.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.11 |
ss7iCfgHrtbtTimerFarEndThe external SS7 gateway heartbeat timer. Upon expiration
it causes the HiPer SS7i to commence the connection
re-establishment procedure to the external SS7 gateway.
The time should be longer than what the external SS7
gateway is set to. Valid for SLAP only. Default = 15000
msec.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.12 |
ss7iCfgChassisIdThis uniquely identifies logical Chassis under the control
of the HiPer SS7I, valid for SLAP only. The OCTET STRING
format must be FF FF FF FF .rw OCTET STRING .1.3.6.1.4.1.429.1.35.1.1.1.13 |
ss7iCfgGwConnRetryCntThe number of times the HiPer SS7i will attempt to
re-establish the TCP/IP connection to the external SS7
gateway after the initial failure was detected. Valid for
SLAP only. Default = 3.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.14 |
ss7iCfgGwConnRetryIntvlThe time interval between attempts of the HiPer SS7i to
re-establish the TCP/IP connection to the external SS7
gateway. Valid for SLAP only. Default = 2 sec.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.15 |
ss7iCfgGwMssdHrtbtThrshThe number of external SS7 gateway heartbeat timeouts
allowed before the connection to the gateway is considered
lost. A setting of 0 means no attempt will be made to
re-establish the connection. Default = 1.rw INTEGER .1.3.6.1.4.1.429.1.35.1.1.1.16 |
ss7iCmd OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.2 |
ss7iCmdTableThe Command table contains an entry for each of the
manageable HiPer SS7i cards in the chassis. It provides a
means through which to take specific actions on them. SEQUENCE OF Ss7iCmdEntry .1.3.6.1.4.1.429.1.35.2.1 |
ss7iCmdEntryThere is one Command Table entry per HiPer SS7i card in the
chassis. Ss7iCmdEntry .1.3.6.1.4.1.429.1.35.2.1.1 |
ss7iCmdIndexA unique value for each HiPer SS7i card in the chassis.
The value of this object matches the value of the index of
the corresponding HiPer SS7i card's entry in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.35.2.1.1.1 |
ss7iCmdMgtStationIdThis object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with ss7iCmdReqId and ss7iCmdResult
to detect interference from other MSs.rw OCTET STRING .1.3.6.1.4.1.429.1.35.2.1.1.2 |
ss7iCmdReqIdThis object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this HiPer SS7i card. If the request-id
is unknown or undefined, this object contains the value
zero.ro INTEGER .1.3.6.1.4.1.429.1.35.2.1.1.3 |
ss7iCmdFunctionThis object contains a value which describes the command
which is being invoked.rw Enumeration .1.3.6.1.4.1.429.1.35.2.1.1.4 |
ss7iCmdForceIn some cases, the HiPer SS7i card may be in a state such
that certain commands could adversely affect connections.
In such cases, a command request with this object not
present or set to noForce will result in a warning. If the
operator elects to ignore such warnings, this object can be
set to force in a subsequent issue of the command to cause
the command to be carried out regardless of its potentially
hazzardous effects.rw Enumeration .1.3.6.1.4.1.429.1.35.2.1.1.5 |
ss7iCmdParamThis object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no aditional parameters required.rw OCTET STRING .1.3.6.1.4.1.429.1.35.2.1.1.6 |
ss7iCmdResultThis object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset.ro Enumeration .1.3.6.1.4.1.429.1.35.2.1.1.7 |
ss7iCmdCodeThe value of this object upon command completion indicates
a further description of what went wrong if the command was
unsuccessful. In the case of tests, a bit mapped result of
each of the sub-tests performed can be found in the status
table.ro Enumeration .1.3.6.1.4.1.429.1.35.2.1.1.8 |
ss7iTrap OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.3 |
ss7iTrapTableTable containing objects to enable traps on the HiPer SS7i
cards in the chassis. SEQUENCE OF Ss7iTrapEntry .1.3.6.1.4.1.429.1.35.3.1 |
ss7iTrapEntryThere is one entry for each HiPer SS7i card in the
chassis. Ss7iTrapEntry .1.3.6.1.4.1.429.1.35.3.1.1 |
ss7iTrapIndexA unique index identifying the HiPer SS7i card to which the
trap enable objects pertain.ro INTEGER .1.3.6.1.4.1.429.1.35.3.1.1.1 |
ss7iTrapPbusLinkUpEnables reporting of a trap and/or log message when the
ENFAS packet bus signaling link to the HiPer Dsp comes up.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.35.3.1.1.2 |
ss7iTrapPbusLinkDownEnables reporting of a trap and/or log message when the
ENFAS packet bus signaling link to the HiPer Dsp goes down.
Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.35.3.1.1.3 |
ss7iTrapGwConnUpEnables reporting of a trap and/or log message when the
TCP/IP signaling connection to the SS7 (or media) gateway
comes up. Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.35.3.1.1.4 |
ss7iTrapGwConnDownEnables reporting of a trap and/or log message when the
TCP/IP signaling connection to the SS7 (or media) gateway
goes down. Default = disableAll(2).rw Enumeration .1.3.6.1.4.1.429.1.35.3.1.1.5 |
ss7iStat OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.4 |
ss7iStatTableThe Statistics table contains an entry for each of the
manageable HiPer SS7i cards in the chassis. It contains
objects that reflect the current status of the card. SEQUENCE OF Ss7iStatEntry .1.3.6.1.4.1.429.1.35.4.1 |
ss7iStatEntryThere is one Statistics table entry for each HiPer SS7i
card in the chassis. Ss7iStatEntry .1.3.6.1.4.1.429.1.35.4.1.1 |
ss7iStatIndexA unique value for each HiPer SS7i card in the chassis.
The value of ss7iStatIndex matches the value of the index
for the corresponding Hiper SS7i card entity in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.35.4.1.1.1 |
ss7iStatGwConnStatusStatus of the TCP/IP connection with the external signaling
gateway. Valid for SLAP only.ro Enumeration .1.3.6.1.4.1.429.1.35.4.1.1.2 |
ss7iStatGwNumMsgsRcvdThe number of messages received from the external SS7
gateway or the Media Gateway Controller.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.3 |
ss7iStatGwNumBytesRcvdThe number of bytes received from the external SS7 gateway
or the Media Gateway Controller.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.4 |
ss7iStatGwNumMsgsSentThe number of messages sent to the external SS7 gateway or
the Media Gateway Controller.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.5 |
ss7iStatGwNumBytesSentThe number of bytes sent to the external SS7 gateway or the
Media Gateway Controller.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.6 |
ss7iStatGwMssdHrtbtCntThe accumulated number of missed heartbeat messages
expected to arrive from the external SS7 gateway.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.7 |
ss7iStatGwLinkLostCntThe accumulated number of times the physical Ethernet
connection is unplugged or severed.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.8 |
ss7iStatGwLinkErrCntThe accumulated number of errors encountered sending to or
receiving from the external SS7 gateway when the TCP/IP
connection is believed to be healthy.ro Counter .1.3.6.1.4.1.429.1.35.4.1.1.9 |
ss7iStatGwLinkDownCauseThe reason the signaling connection to the external SS7
gateway went down.ro Enumeration .1.3.6.1.4.1.429.1.35.4.1.1.10 |
ss7iHdm OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.5 |
ss7iHdmTableThe ss7iHdm table contains objects for all of the HiPer Dsp
cards in the chassis. SEQUENCE OF Ss7iHdmEntry .1.3.6.1.4.1.429.1.35.5.1 |
ss7iHdmEntryThere is one entry for each HiPer Dsp Card in the chassis. Ss7iHdmEntry .1.3.6.1.4.1.429.1.35.5.1.1 |
ss7iHdmIndexA unique value for each HiPer SS7i card in the chassis.
The value of ss7iHdmIndex matches the value of the index
for the corresponding HiPer SS7i card entity in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.35.5.1.1.1 |
ss7iHdmIndex2The secondary index into the ss7iHdm table. There is one
entry for each Hiper Dsp in the chassis. The value of the
index is equal to the chassis slot number of a HiPer Dsp
card.ro INTEGER .1.3.6.1.4.1.429.1.35.5.1.1.2 |
ss7iHdmConnStateThe state of the signaling packet bus connection to the
HiPer Dsp. There is one connection from the HiPer SS7i
card to each HiPer Dsp in the chassis.ro Enumeration .1.3.6.1.4.1.429.1.35.5.1.1.3 |
ss7iHdmSndPktsOkCntThe number of packets successfully transmitted over the
signaling packet bus connection.ro Counter .1.3.6.1.4.1.429.1.35.5.1.1.4 |
ss7iHdmSndPktsFailCntThe number of packets failing to transmit over the
signaling packet bus connection.ro Counter .1.3.6.1.4.1.429.1.35.5.1.1.5 |
ss7iHdmRcvPktsOkCntThe number of packets sucessfully received over the
signaling packet bus connection.ro Counter .1.3.6.1.4.1.429.1.35.5.1.1.6 |
ss7iHdmRcvPktsFailCntThe number of signaling packet bus connection packets
rejected by the HiPer SS7i message handler.ro Counter .1.3.6.1.4.1.429.1.35.5.1.1.7 |
ss7iHdmLinkDownCauseThe reason the packet bus ENFAS signaling link to the HiPer
Dsp went down.ro Enumeration .1.3.6.1.4.1.429.1.35.5.1.1.8 |
ss7iSigPb OBJECT IDENTIFIER .1.3.6.1.4.1.429.1.35.6 |
ss7iSigPbTableThe ss7iSigPb table contains objects for managing the
signaling packet bus connections to all of the HiPer Dsp
cards in the chassis. SEQUENCE OF Ss7iSigPbEntry .1.3.6.1.4.1.429.1.35.6.1 |
ss7iSigPbEntryThere is one entry for each HiPer Dsp Card in the chassis. Ss7iSigPbEntry .1.3.6.1.4.1.429.1.35.6.1.1 |
ss7iSigPbIndexA unique value for each HiPer SS7i card in the chassis.
The value of ss7iSigPbIndex matches the value of the index
for the corresponding HiPer SS7i card entity in the entity
table of the chassis MIB.ro INTEGER .1.3.6.1.4.1.429.1.35.6.1.1.1 |
ss7iSigPbIndex2The secondary index into the ss7iSigPb table. There is one
entry for each Hiper Dsp in the chassis. The value of the
index is equal to the chassis slot number of a HiPer Dsp
card.ro INTEGER .1.3.6.1.4.1.429.1.35.6.1.1.2 |
ss7iSigPbConnectionThe means to enable or disable a signaling packet bus
connection between the HiPer SS7i and a Hiper Dsp. Default
= disable(1).rw Enumeration .1.3.6.1.4.1.429.1.35.6.1.1.3 |
ss7iSigPbLoopbackThe means to enable or disable the loopback state on the
signaling packet bus connection between the HiPer SS7i and
a Hiper Dsp. Default = disable(1).rw Enumeration .1.3.6.1.4.1.429.1.35.6.1.1.4 |