SONUS-ATM-EXTENSIONS-MIB
AI MIB Summary
The SONUS-ATM-EXTENSIONS-MIB extends standard ATM MIB definitions to monitor Sonus-specific ATM interface statistics, virtual circuit states, and protocol extensions for Sonus Session Border Controllers and ATM gateway appliances. It enables granular visibility into ATM layer performance metrics, including PVC/SVC counters, cell loss ratios, and interface error conditions specific to Sonus hardware implementations.
The MIB Module for Sonus ATM extensions.
Main OID:
sonusAtmExtMIB.1.3.6.1.4.1.2879.2.3.5
69
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
sonusAtmExtMIBThe MIB Module for Sonus ATM extensions. MODULE-IDENTITY .1.3.6.1.4.1.2879.2.3.5 |
sonusAtmExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.3.5.1 |
sonusAtmExtVclAdmnTableThe Virtual Channel Link (VCL) Extension table. SEQUENCE OF SonusAtmExtVclAdmnEntry .1.3.6.1.4.1.2879.2.3.5.1.1 |
sonusAtmExtVclAdmnEntryAn entry in the VCL Extension table. This entry adds additional objects to the atmVclTable. A row is added to this table when a row is created in the atmVclTable. SonusAtmExtVclAdmnEntry .1.3.6.1.4.1.2879.2.3.5.1.1.1 |
sonusAtmExtVclAdmnIfIndexThe ifIndex value of the NIF that VCL is on.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.1 |
sonusAtmExtVclAdmnVpiThe VPI value of the VCL.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.2 |
sonusAtmExtVclAdmnVciThe VCI value of the VCL.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.3 |
sonusAtmExtVclAdmnModeThe operation mode for VC.rw Enumeration .1.3.6.1.4.1.2879.2.3.5.1.1.1.4 |
sonusAtmExtVclAdmnActionThe dryup option for VC.rw Enumeration .1.3.6.1.4.1.2879.2.3.5.1.1.1.5 |
sonusAtmExtVclAdmnTimeoutThe dryup timeout in minute. The default is one hourrw Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.6 |
sonusAtmExtVclAdmnStateA VCL must be enabled before System Manager will fully recognize it. The VCL must be disabled before the server module can be deleted.rw Enumeration .1.3.6.1.4.1.2879.2.3.5.1.1.1.7 |
sonusAtmExtVclAdmnOutOfServiceReasonThe reason of ATM VC being out of service. The NIF could be out of service due to one of the following reasons: operator initiated command, gateway not responding to arp request, port failure/outOfService, or server failure/outOfService. The notApplicable is set when the ATM VC is inService or dryUp statero Enumeration .1.3.6.1.4.1.2879.2.3.5.1.1.1.8 |
sonusAtmExtVclAdmnRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.3.5.1.1.1.9 |
sonusAtmExtVclAdmnBwDeviationThe deviation between actual and expected VCL bandwidth in percentage of the overall VCL bandwidth. If actual bandwidth is greater than the expected bandwdith plus deviation amount, a trap will be set and the trap will be only cleared when the actual bandwidth dropped below the expected bandwidth. If the actual bandwidth is lower than the expected badniwdth minus 2 times of deviation amount, a different trap will be set and the trap will be cleared when the actual bandwdith reaches the expected bandwidth.rw Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.10 |
sonusAtmExtVclAdmnBwContingencyThe percentage of the overall VCL bandwidth is reserved for contigency. If actual bandwidth is greater than the expected bandwdith and less than the overall VCL bandwidth minus contingency amount, calls will still be accepted.rw Integer32 .1.3.6.1.4.1.2879.2.3.5.1.1.1.11 |
sonusAtmExtVclStatTableThe Virtual Channel Link (VCL) Extension stat table. SEQUENCE OF SonusAtmExtVclStatEntry .1.3.6.1.4.1.2879.2.3.5.1.2 |
sonusAtmExtVclStatEntryAn entry in the VCL Extension stat table. SonusAtmExtVclStatEntry .1.3.6.1.4.1.2879.2.3.5.1.2.1 |
sonusAtmExtVclStatIfIndexThe ifIndex value of the NIF that VCL is on.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.1 |
sonusAtmExtVclStatVpiThe VPI value of the VCL.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.2 |
sonusAtmExtVclStatVciThe VCI value of the VCL.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.3 |
sonusAtmExtVclStatStateVCL enrties are created with a state of inService. A VCL which is outOfService has had all active calls terminated. A VCL must be outOfService in order to change its state to disabled.ro Enumeration .1.3.6.1.4.1.2879.2.3.5.1.2.1.4 |
sonusAtmExtVclStatCallNumThe number of calls on this VCLro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.5 |
sonusAtmExtVclStatSpeedCurThe current speed(bandwidth) allocated on this VCLro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.6 |
sonusAtmExtVclStatSpeedMaxThe maximum speed allowed on this VCLro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.7 |
sonusAtmExtVclStatSpeedActualThe actual speed(bandwidth) on this VCLro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.8 |
sonusAtmExtVclStatSpeedDeviationThe actual speed(bandwidth) deviation on this VCLro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.2.1.9 |
sonusAtmExtAtmLayerTableThe ATM layer table. This table maps ATM layer ifIndex to a shelf, slot, and port. SEQUENCE OF SonusAtmExtAtmLayerEntry .1.3.6.1.4.1.2879.2.3.5.1.3 |
sonusAtmExtAtmLayerEntryAn entry in the ATM layer table. This entry maps the ifIndex of the ATM layer to a shelf, slot and port. A row is added to this table when a SONET port is created SonusAtmExtAtmLayerEntry .1.3.6.1.4.1.2879.2.3.5.1.3.1 |
sonusAtmExtAtmLayerShelfIndexThe index for a Sonus shelf. SonusShelfIndex (SONUS-TC) .1.3.6.1.4.1.2879.2.3.5.1.3.1.1 |
sonusAtmExtAtmLayerSlotIndexThe index for a Sonus slot. SonusSlotIndex (SONUS-TC) .1.3.6.1.4.1.2879.2.3.5.1.3.1.2 |
sonusAtmExtAtmLayerPortIndexThe index for a logical ATM layer port. Integer32 .1.3.6.1.4.1.2879.2.3.5.1.3.1.3 |
sonusAtmExtAtmLayerIfIndexThe ifIndex at the ATM layer for this shelf, slot, and port.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.3.1.4 |
sonusAtmExtAtmLayerRowStatusThis object is used to create, delete, or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.3.5.1.3.1.5 |
sonusAtmExtAal5LayerTableThe AAL5 layer table. This table maps AAL5 layer ifIndex to a shelf, slot, and port. SEQUENCE OF SonusAtmExtAal5LayerEntry .1.3.6.1.4.1.2879.2.3.5.1.4 |
sonusAtmExtAal5LayerEntryAn entry in the AAL5 layer table. This entry maps the ifIndex of the AAL5 layer to a shelf, slot and port. A row is added to this table when a SONET port is created SonusAtmExtAal5LayerEntry .1.3.6.1.4.1.2879.2.3.5.1.4.1 |
sonusAtmExtAal5LayerShelfIndexThe index for a Sonus shelf. SonusShelfIndex (SONUS-TC) .1.3.6.1.4.1.2879.2.3.5.1.4.1.1 |
sonusAtmExtAal5LayerSlotIndexThe index for a Sonus slot. SonusSlotIndex (SONUS-TC) .1.3.6.1.4.1.2879.2.3.5.1.4.1.2 |
sonusAtmExtAal5LayerPortIndexThe index for a logical AAL5 layer port. Integer32 .1.3.6.1.4.1.2879.2.3.5.1.4.1.3 |
sonusAtmExtAal5LayerIfIndexThe ifIndex at the AAL5 layer for this shelf, slot, and port.ro Integer32 .1.3.6.1.4.1.2879.2.3.5.1.4.1.4 |
sonusAtmExtAal5LayerRowStatusThis object is used to create, delete, or modify a row in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.3.5.1.4.1.5 |
sonusAtmExtOamF5TableA list of ATM OAM F5 entries. SEQUENCE OF SonusAtmExtOamF5Entry .1.3.6.1.4.1.2879.2.3.5.1.5 |
sonusAtmExtOamF5EntryAn entry of sonusAtmExtOamF5Table which is used to provide OAM feature for Virtual circuit in this ATM interface. Three major OAM functions are supported in this MIB entry. The first function is the Loopback capability for this virtual circuit which includes both of End2end Loopback and UNILoopback. The second function is the OAM continuity capability for this virtual circuit which uses Loopback cells to transmit periodically. Transmit and recieve loopback cell statisitics can be used to determine if there is continuity. The third function is basic fault management feature using AIS/RDI cells to inform the upstream/downstream failure condition, the counters are used to keep failure statistics. SonusAtmExtOamF5Entry .1.3.6.1.4.1.2879.2.3.5.1.5.1 |
sonusAtmExtOamF5IfIndexThe ifIndex of this entry. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2879.2.3.5.1.5.1.1 |
sonusAtmExtOamF5VpiThe virtual path identifier of this entry AtmVpIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2879.2.3.5.1.5.1.2 |
sonusAtmExtOamF5VciThe virtual circuit identifier of this entry AtmVcIdentifier (ATM-TC-MIB) .1.3.6.1.4.1.2879.2.3.5.1.5.1.3 |
sonusAtmExtOamF5EnableThis objects is used to enable or disable the F5 OAM loopback cells. Whenever this object is set to enable, at least one F5 OAM loopback cell will be sent. If the loopback timer is non-zero, then F5 OAM loopback cells will be sent continuosly at the interval defined by the loopback timer to perform a continuity test.rw Enumeration .1.3.6.1.4.1.2879.2.3.5.1.5.1.4 |
sonusAtmExtOamF5LoopbackTypeThis object is used to define the F5 OAM loopback type for this virtual circuit. Loopback cells may be sent to the local UNI or end to end.rw Enumeration .1.3.6.1.4.1.2879.2.3.5.1.5.1.5 |
sonusAtmExtOamF5LoopbackTimerThis object is used to define the time between OAM F5 loopback cells. If this object is set to zero, then a single F5 OAM cell will be sent every time the sonusAtmOamF5Enable object is set to enable. If this obkect is non-zero, then loopback cells will be sent continuously at the interval defined by this object to perform a continuity test.rw Integer32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.6 |
sonusAtmExtOamF5ReceiveEnd2EndLoopbackFailureThis is a counter object to collect the end2endLoopback failure statistics for this virtual circuit. It counts end to end F5 OAM loopback cells received with an error.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.7 |
sonusAtmExtOamF5ReceiveUNILoopbackFailureThis is a counter object to collect the UNILoopback failure statistics for this virtual circuit. It counts UNI F5 OAM loopback cells received with an error.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.8 |
sonusAtmExtOamF5TransmitEnd2EndLoopbackThis is a counter object to collect the all transmitted end2endLoopback statistics for this virtual circuit. It counts end to end F5 OAM loopback cells sent.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.9 |
sonusAtmExtOamF5TransmitUNILoopbackThis is a counter object to collect the all transmitted UNILoopback statistics for this virtual circuit. It counts UNI F5 OAM loopback cells sent.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.10 |
sonusAtmExtOamF5ReceiveEnd2EndLoopbackThis is a counter object to collect the all received end2endLoopback statistics for this virtual circuit. It counts good end to end F5 OAM loopback cells received.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.11 |
sonusAtmExtOamF5ReceiveUNILoopbackThis is a counter object to collect the all received UNILoopback statistics for this virtual circuit. It counts good UNI F5 OAM loopback cells received.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.12 |
sonusAtmExtOamF5ReceiveEnd2EndAISThis is a counter object to collect the end2endAIS cells received in this virtual circuit.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.13 |
sonusAtmExtOamF5ReceiveEnd2EndRDIThis is a counter object to collect the end2endRDI cells received in this virtual circuit.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.14 |
sonusAtmExtOamF5TransmitEnd2EndRDIThis is a counter object to collect the end2endRDI cells transmit in this virtual circuit.ro Counter32 .1.3.6.1.4.1.2879.2.3.5.1.5.1.15 |
sonusAtmExtVclMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.3.5.2 |
sonusAtmExtVclMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.3.5.2.0 |
sonusAtmExtVclInServiceNotificationThis trap indicates that an ATM VC is available to support call processing. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.1 |
sonusAtmExtVclOutOfServiceNotificationThis trap indicates that an ATM VC is no longer available to support call processing. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.2 |
sonusAtmExtVclEnabledNotificationThis trap indicates that an ATM VC's configuration is enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.3 |
sonusAtmExtVclDisabledNotificationThis trap indicates that an ATM VC's configuration is disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.4 |
sonusAtmExtVclDeletedNotificationThis trap indicates that an ATM VC's configuration is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.5 |
sonusAtmExtVclHighWatermarkNotificationThis trap indicates that an ATM VC's high watermark has been reached the first time since the ATM VC's low watermark has beend reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.6 |
sonusAtmExtVclLowWatermarkNotificationThis trap indicates that an ATM VC's low watermark has been reached the first time since the ATM VC's high watermark has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.7 |
sonusAtmExtVclBwHighDeviationNotificationThis trap indicates that a VCL's actual bandwidth is greater than the expected bandwidth plus deviation amount. This trap will be re-armed when the actual bandwdith dropped below the expected level. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.8 |
sonusAtmExtVclBwLowDeviationNotificationThis trap indicates that a VCL's actual bandwidth is lower than the expected bandwidth minus 2 times the deviation amount.This trap will be re-armed when the actual bandwdith reached the expected level. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.3.5.2.0.9 |
sonusAtmExtVclMIBNotificationsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.3.5.2.1 |