SONUS-NODE-RESOURCES-MIB
The MIB Module for Node Resources Management.
Main OID:
sonusNodeResourcesMIB.1.3.6.1.4.1.2879.2.2.2
326
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
326 total| Object Name |
|---|
sonusNodeResourcesMIBThe MIB Module for Node Resources Management. MODULE-IDENTITY .1.3.6.1.4.1.2879.2.2.2 |
sonusNodeResourcesMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1 |
sonusServProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.1 |
sonusServProfileNextIndexThis field is deprecated. The next valid index to use when creating an entry in the sonusServProfileTable.rodeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.1 |
sonusServProfileTableThis field is deprecated. This table specifies the service profile list for the node.deprecated SEQUENCE OF SonusServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.1.2 |
sonusServProfileEntryThis field is deprecated.deprecated SonusServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.1.2.1 |
sonusServProfileIndexThis field is deprecated. Identifies the target service profile entry.rodeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.1 |
sonusServProfileStateThis field is deprecated. The administrative state of this service profile entry.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.2 |
sonusServProfileNameThis field is deprecated. The user name of this service profile.rwdeprecated SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.3 |
sonusServProfileTypeThis field is deprecated. The type of endpoint (circuit or packet) supported by this service profile. Circuit endpoints support all the VCkt and VPkt profile parameters for echo cancellation and packetization. Packet endpoints support only the VPkt parameters for packetization.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.4 |
sonusServProfileVCktEncodingThis field is deprecated. The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.5 |
sonusServProfileVCktBandwidthThis field is deprecated. The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.6 |
sonusServProfileVCktNecEnableThis field is deprecated. Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the Voice Packet Assembler/Disassember (VPAD) operates in a circuit emulation mode.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.7 |
sonusServProfileVPktEncodingThis field is deprecated. The audio encoding method to be performed on the packet data received from, and destined to the IP network. The default encoding method is G.711 Ulaw.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.8 |
sonusServProfileVPktFrameSizeThis field is deprecated. Specifies the number of samples per frame. For G.711 encoding mode, value must be a multiple of 8 samples. For G.723 encoding mode, value must be a multiple of 240 samples. For G.729A, value must be a multiple of 80 samples. Note that 8 samples represent one millisecond of voice data. A value of 0 specifies a frame size equal to the minimum for the encoding method (e.g 8 samples for G.711)rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.9 |
sonusServProfileVPktFramesPerPacketThis field is deprecated. Specifies the number of frames to transmit per packet. For G.711 encoding mode, valid values range from 5 to 40 frames, in increments of 5 frames. The default value for G.711 is 10 frames per packet. For G.723 encoding mode, valid values are 1 or 2, with a default value of 1 frame per packet. A value of 0 specifies the number of frames per packet equal to the default value for the encoding mode (e.g. 10 frames per packet for G.711).rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.10 |
sonusServProfileVPktMaxNetworkJitterThis field is deprecated. Specifies the maximum expected network jitter across the IP network in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 80 (10msec).rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.11 |
sonusServProfileVPktTosValueThis field is deprecated. Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.12 |
sonusServProfileCttTestTypeThis field is deprecated. For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.13 |
sonusServProfileCttTimeoutThis field is deprecated. For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.14 |
sonusServProfileCttMinDetectTimeThis field is deprecated. For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.15 |
sonusServProfileCttMinReleaseTimeThis field is deprecated. For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.16 |
sonusServProfileCapabilityThis field is deprecated. Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.17 |
sonusServProfileDPktRestrictedCfgThis field is deprecated. Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.rwdeprecated Enumeration .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.18 |
sonusServProfileDPktRtpPayloadTypeThis field is deprecated. Specifies the RTP payload type to be included in the RTP header of the voice data packetrwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.19 |
sonusServProfileDPktMaxNetworkJitterThis field is deprecated. Specifies the maximum expected network jitter across the network for data calls in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. A separate value for data calls is provided to allow a single service profile to specify the jitter buffer size for both voice calls and data calls. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 400 (50msec).rwdeprecated Integer32 .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.20 |
sonusServProfileRowStatusThis field is deprecated.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.1.2.1.21 |
sonusSonicBusStatTableThis table presents Sonic Bus statistics for the node. SEQUENCE OF SonusSonicBusStatEntry .1.3.6.1.4.1.2879.2.2.2.1.2 |
sonusSonicBusStatEntry SonusSonicBusStatEntry .1.3.6.1.4.1.2879.2.2.2.1.2.1 |
sonusSonicBusStatShelfIndexIdentifies the target shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.2.1.1 |
sonusSonicBusStatNumCallsIndicates the number of active calls on the shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.2.1.2 |
sonusSonicBusStatBwAllocatedIndicates the percentage of Sonic Bus bandwidth allocated to the active calls on the shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.2.1.3 |
sonusSonicBusStatSduCountIndicates the number of Sonic Bus data units allocated to the active calls on the shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.2.1.4 |
sonusActiveCallTableThis table presents the active call data for the node. SEQUENCE OF SonusActiveCallEntry .1.3.6.1.4.1.2879.2.2.2.1.3 |
sonusActiveCallEntry SonusActiveCallEntry .1.3.6.1.4.1.2879.2.2.2.1.3.1 |
sonusActiveCallShelfIndexIdentifies the target shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.1 |
sonusActiveCallSlotIndexIdentifies the target slot.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.2 |
sonusActiveCallIndexIdentifies the target call index.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.3 |
sonusActiveCallIdRepresents the global call identifier (GCID) for the call. GCID is unique across the entire node.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.4 |
sonusActiveCallSonicBusUnitsAllocatedRepresents the SonicBus bandwidth allocated for the call expressed as SonicData Units per second.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.5 |
sonusActiveCallNumResourcesRepresents the number of resources currently allocated to the call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.6 |
sonusActiveCallStateRepresents the current call state.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.7 |
sonusActiveCallIngressServProfileThe name of the ingress service profile associated with this call.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.8 |
sonusActiveCallEgressServProfileThe name of the egress service profile associated with this call.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.9 |
sonusActiveCallCallingNumThe E.164 number representing the Calling Party's telephone number.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.10 |
sonusActiveCallCalledNumThe E.164 number representing the Called Party's telephone number.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.11 |
sonusActiveCallAddressTransPerformedIndicates whether any address translation has been performed on the called party number. Valid translations are Local Number Portability (LPN), and 800 number translation (Tollfree).ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.3.1.12 |
sonusActiveCallOrigCalledNumIf an address translation has been performed on the called party number, this entry contains the original, untranslated number.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.13 |
sonusActiveCallScenarioTypeSpecifies the call scenario type for this call.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.14 |
sonusActiveCallIngressPstnSlotNumFor calls originating from the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.15 |
sonusActiveCallIngressPstnPortNumFor calls originating from the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.16 |
sonusActiveCallIngressPstnChannelNumFor calls originating from the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.17 |
sonusActiveCallIngressPstnChannelCountFor calls originating from the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.18 |
sonusActiveCallIngressPstnChannelBitMapFor calls originating from the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.19 |
sonusActiveCallEgressPstnSlotNumFor calls delivered to the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.20 |
sonusActiveCallEgressPstnPortNumFor calls delivered to the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.21 |
sonusActiveCallEgressPstnChannelNumFor calls delivered to the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.22 |
sonusActiveCallEgressPstnChannelCountFor calls delivered to the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.23 |
sonusActiveCallEgressPstnChannelBitMapFor calls delivered to the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.24 |
sonusActiveCallIngressLocalIpSockAddrFor calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) local socket connection.ro IpAddress .1.3.6.1.4.1.2879.2.2.2.1.3.1.25 |
sonusActiveCallIngressRemoteIpSockAddrFor calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) remote socket connection.ro IpAddress .1.3.6.1.4.1.2879.2.2.2.1.3.1.26 |
sonusActiveCallEgressLocalIpSockAddrFor calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) local socket connection.ro IpAddress .1.3.6.1.4.1.2879.2.2.2.1.3.1.27 |
sonusActiveCallEgressRemoteIpSockAddrFor calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) remote socket connection.ro IpAddress .1.3.6.1.4.1.2879.2.2.2.1.3.1.28 |
sonusActiveCallIngressPstnTrunkFor calls originating from the PSTN (circuit) side, specifies the trunk group name to which the Ingress Pstn Channel belongs.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.29 |
sonusActiveCallEgressPstnTrunkFor calls delivered to the PSTN (circuit) side, specifies the trunk group name to which the Egress Pstn Channel belongs.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.30 |
sonusActiveCallIngressIpDestGwNameFor calls originating from the IP (packet) side, specifies the name of the remote gateway on which the call originated.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.31 |
sonusActiveCallEgressIpDestGwNameFor calls delivered to the IP (packet) side, specifies the name of the remote gateway to which the call was delivered.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.3.1.32 |
sonusActiveCallDurationIndicates the duration in seconds for this call following answer.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.33 |
sonusActiveCallIngressEpTypeIndicates the end point type for the ingress end point.ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.3.1.34 |
sonusActiveCallEgressEpTypeIndicates the end point type for the egress end point.ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.3.1.35 |
sonusActiveCallIngressSgTypeIndicates the signaling type for the ingress end point.ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.3.1.36 |
sonusActiveCallEgressSgTypeIndicates the signaling type for the egress end point.ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.3.1.37 |
sonusActiveCallPacketsSentIndicates the number of RTP packets sent on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.38 |
sonusActiveCallPacketsReceivedIndicates the number of RTP packets received on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.39 |
sonusActiveCallOctetsSentIndicates the number of RTP octets sent on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.40 |
sonusActiveCallOctetsReceivedIndicates the number of RTP octets received on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.41 |
sonusActiveCallPacketsLostIndicates the number of RTP packets lost on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.42 |
sonusActiveCallPacketsDiscardedIndicates the number of RTP packets discarded by the jitter buffer.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.43 |
sonusActiveCallInterarrivalJitterIndicates the interarrival packet jitter on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.44 |
sonusActiveCallPacketLatencyIndicates the latency experienced on this call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.3.1.45 |
sonusCallResTableThis table presents the call resource data for the node. Each active call contains a set of allocated resources. This table provides a brief description and the information required to access detailed information about each allocated resource. SEQUENCE OF SonusCallResEntry .1.3.6.1.4.1.2879.2.2.2.1.4 |
sonusCallResEntry SonusCallResEntry .1.3.6.1.4.1.2879.2.2.2.1.4.1 |
sonusCallResShelfIndexIdentifies the target shelf containing the call to be accessed.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.1 |
sonusCallResSlotIndexIdentifies the target slot containing the call to be accessed.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.2 |
sonusCallResCallIndexIdentifies the target call to be accessed.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.3 |
sonusCallResIndexIdentifies the target resource index to access within the call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.4 |
sonusCallResIdRepresents the internal resource identifier that uniquely represents the resource to the resource manager entity responsible for the resource.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.5 |
sonusCallResCallIdRepresents the global call identifier (GCID) for the call to which this resource is allocated. This information is provided to ensure that the resource is truly allocated to the call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.6 |
sonusCallResTypeSpecifies the resource type for this resource.ro Enumeration .1.3.6.1.4.1.2879.2.2.2.1.4.1.7 |
sonusCallResMgrHandleSpecifies the internal handle for the resource manager entity responsible for this resource. This element is provided for information only.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.8 |
sonusCallResMgrShelfIndexSpecifies the shelf on which this resource resides.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.9 |
sonusCallResMgrSlotIndexSpecifies the card slot on which this resource resides.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.4.1.10 |
sonusCallPegCountsTableThis table presents call peg count statistics for the node. SEQUENCE OF SonusCallPegCountsEntry .1.3.6.1.4.1.2879.2.2.2.1.5 |
sonusCallPegCountsEntry SonusCallPegCountsEntry .1.3.6.1.4.1.2879.2.2.2.1.5.1 |
sonusCallPegCountsShelfIndexIdentifies the target shelf to obtain the call counters.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.1 |
sonusCallPegCountsSlotIndexIdentifies the target slot.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.2 |
sonusCallPegCountsResetProvides a means to reset the active call attempt and completion counters. Any set operation on this object will result in the attempt and completion counters being cleared.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.5.1.3 |
sonusCallPegCountsAttemptsIndicates the number of call attempts on this shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.4 |
sonusCallPegCountsCompletionsIndicates the total number of completed call attempts on this shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.5 |
sonusCallPegCountsActiveCallsIndicates the current number of active calls in the shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.6 |
sonusCallPegCountsStableCallsIndicates the current number of stable calls in the shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.7 |
sonusCallPegCountsUpdatesIndicates the number of call updates (modifications) on this shelf.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.8 |
sonusCallPegCountsActiveCallsNonUserIndicates the current number of active non-call associated signalling channels in the shelf. (ie ISDN D channel)ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.9 |
sonusCallPegCountsStableCallsNonUserIndicates the current number of stable non-call associated signalling channels in the shelf. (ie ISDN D channel)ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.5.1.10 |
sonusToneObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.6 |
sonusToneProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.6.1 |
sonusToneProfileNextIndexThe next valid index to use when creating an entry in the sonusToneProfileTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.1 |
sonusToneProfileTableThis table contains tone profiles for the node. SEQUENCE OF SonusToneProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.6.1.2 |
sonusToneProfileEntry SonusToneProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1 |
sonusToneProfileIndexIdentifies the tone profile entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.1 |
sonusToneProfileNameThe user name of this tone profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.2 |
sonusToneProfileGenerationMethodDetermines the generation method for the tone. This value is specified at object creation time and cannot be modified.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.3 |
sonusToneProfileTone1FreqSpecifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone or dualTone.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.4 |
sonusToneProfileTone1PowerSpecifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone or dualTone.rw Integer32 (-50..3) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.5 |
sonusToneProfileTone2FreqSpecifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.6 |
sonusToneProfileTone2PowerSpecifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone.rw Integer32 (-50..3) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.7 |
sonusToneProfileCarrierFreqSpecifies the frequency in Hertz of the carrier for the modulated signal. Value must be less than 4000. If set to 0, then silence is generated. Only valid if generation method is modulatedTone.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.8 |
sonusToneProfileSignalFreqSpecifies the frequency in Hertz of the sinusoid modulating the carrier sinusoid. Value must be less than 4000. Only valid if generation method is modulatedTone.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.9 |
sonusToneProfileModPowerSpecifies Carrier Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is modulatedTone.rw Integer32 (-50..3) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.10 |
sonusToneProfileModIndexSpecifies the modulation index of the signal. Value must be in the range of 0 to 300 in 1% units. Only valid if generation method is modulatedTone.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.11 |
sonusToneProfileMake1Duration of the first on cadence in milliseconds. If 0, then the duration of the first on cadence is 0 msec. If -1, then the tone is played continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.12 |
sonusToneProfileBreak1Duration of the first off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.13 |
sonusToneProfileMake2Duration of the second on cadence in milliseconds. If 0, then the duration of the second on cadence is 0 msec. If -1, then the tone is played continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.14 |
sonusToneProfileBreak2Duration of the second off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.15 |
sonusToneProfileMake3Duration of the thrid on cadence in milliseconds. If 0, then the duration of the third on cadence is 0 msec. If -1, then the tone is played continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.16 |
sonusToneProfileBreak3Duration of the third off cadence in milliseconds. If 0, then silence is not generated after the third on cadence. If -1, then silence is generated continuously.rw Integer32 (-1..8000) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.17 |
sonusToneProfileRepeatNumber of cadence cycles to generate. If 0, then the tone pattern is repeated indefinitely.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.18 |
sonusToneProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.19 |
sonusToneType OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.6.2 |
sonusToneTypeNextIndexThe next valid index to use when creating an entry in the sonusToneTypeTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.2.1 |
sonusToneTypeTableThis table contains tone types for the node. SEQUENCE OF SonusToneTypeEntry .1.3.6.1.4.1.2879.2.2.2.1.6.2.2 |
sonusToneTypeEntry SonusToneTypeEntry .1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1 |
sonusToneTypeIndexIdentifies the tone type entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.1 |
sonusToneTypeNameThe user name of this tone type. Possible types include 'dial', 'busy', 'reorder', etc.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.2 |
sonusToneTypeRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.3 |
sonusTonePackage OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.6.3 |
sonusTonePackageNextIndexThe next valid index to use when creating an entry in the sonusTonePackageTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.3.1 |
sonusTonePackageTableThis table contains tone packages for the node. SEQUENCE OF SonusTonePackageEntry .1.3.6.1.4.1.2879.2.2.2.1.6.3.2 |
sonusTonePackageEntry SonusTonePackageEntry .1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1 |
sonusTonePackageIndexIdentifies the tone package.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.1 |
sonusTonePackageNameThe name of this tone package. This name should reflect the country or carrier which will be using this package.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.2 |
sonusTonePackageRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.3 |
sonusTonePkgElem OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.6.4 |
sonusTonePkgElemTableThis table contains elements which bind tone types to tone profiles for a given tone package. SEQUENCE OF SonusTonePkgElemEntry .1.3.6.1.4.1.2879.2.2.2.1.6.4.1 |
sonusTonePkgElemEntry SonusTonePkgElemEntry .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1 |
sonusTonePkgElemIndexIdentifies the target tone package element.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.1 |
sonusTonePkgElemTonePackageRefIdentifies the tone packge for this element.rw SonusNameReference (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.2 |
sonusTonePkgElemToneTypeRefIdentifies the tone type for this element.rw SonusNameReference (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.3 |
sonusTonePkgElemToneProfileRefThe name of the tone profile that this tone type maps to for this tone package.rw SonusNameReference (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.4 |
sonusTonePkgElemRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.5 |
sonusDigitProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.7 |
sonusDigitProfileNextIndexThe next valid index to use when creating an entry in the sonusDigitProfileTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.1 |
sonusDigitProfileTableThis table contains digit profiles for the node. Digit Profiles contain both digit generation (sonusDigitProfileGen...) and digit detection (sonusDigitProfileDet...) parameters. SEQUENCE OF SonusDigitProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.7.2 |
sonusDigitProfileEntry SonusDigitProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.7.2.1 |
sonusDigitProfileIndexIdentifies the digit profile entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.1 |
sonusDigitProfileNameThe user name of this digit profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.2 |
sonusDigitProfileTypeSpecifies the digit's format. This value is set at object creation time and cannot be modified.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.3 |
sonusDigitProfileGenPowerSpecifies digit generation power level in dBm. Power level ranges from -50 dBm (minimum power) to +3 dBm (maximum power).rw Integer32 (-50..3) .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.4 |
sonusDigitProfileGenMakeSpecifies duration of generated digits in milliseconds.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.5 |
sonusDigitProfileGenBreakSpecifies silence between generated digits in milliseconds.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.6 |
sonusDigitProfileDetMinPowerSpecifies minimum power level in dBm required for digit detection. Valid levels range from -45dBm to -25dBm.rw Integer32 (-45..-25) .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.7 |
sonusDigitProfileDetMinOnDurationSpecifies minimum tone duration in milliseconds required for digit detection. The value must in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 25ms and 100ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.8 |
sonusDigitProfileDetMinOffDurationSpecifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.9 |
sonusDigitProfileDetFreqAcceptRangeSpecifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digits the value represents only the accept range. Frequencies detected within the accept range will result in digit detection. Frequencies detected outside the reject range will not result in digit detection. . DTMF DTMF MFR1 VALUE ENUMERATION ACCEPT REJECT ACCEPT ----- ----------- ---------------- ------------------ 1 narrow +/-2.0% +/-3.0% +/-(1.5% + 5Hz) 2 medium +/-2.5% +/-3.5% +/-(1.5% + 10Hz) 3 wide +/-3.0% +/-4.0% +/-(1.5% + 15Hz) 4 wider +/-3.5% +/-4.5% N/Arw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10 |
sonusDigitProfileDtmfDetTwistCutoffFor DTMF digit detection only. Twist is the ratio of high group power to low. Twist ratios below the twist cutoff will result in digit detection. Twist ratios above the twist cutoff will result in digit rejection. Value must be between 4dB and 12dB in increments of 2dB.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.11 |
sonusDigitProfileMfr1GenMakeKpSpecifies duration of generated KP digit in milliseconds. Only applicable if digit type is MFR1.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.12 |
sonusDigitProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.7.2.1.13 |
sonusStaticCall OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.8 |
sonusStaticCallNextIndexThe next valid index to use when creating an entry in the sonusStaticCallAdmnTablero Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.1 |
sonusStaticCallAdmnTableThis table specifies the static call list for the node. SEQUENCE OF SonusStaticCallAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.8.2 |
sonusStaticCallAdmnEntry SonusStaticCallAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.8.2.1 |
sonusStaticCallAdmnIndexIdentifies the target static call entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.1 |
sonusStaticCallAdmnStateThe administrative state of this static call entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.2 |
sonusStaticCallAdmnNameThe user name of this static call.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.3 |
sonusStaticCallAdmnEndPointAShelfA 32-bit integer identifying the shelf of the end point Arw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.4 |
sonusStaticCallAdmnEndPointASlotA 32-bit integer identifying the slot of the end point Arw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.5 |
sonusStaticCallAdmnEndPointAPortPort index of end point A.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.6 |
sonusStaticCallAdmnEndPointAChannelIndicates the DS0 channel of the end point Arw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.7 |
sonusStaticCallAdmnEndPointAServProfileThe service profile used for end point Arw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.8 |
sonusStaticCallAdmnEndPointBTypeThe type of end point B (circuit or packet).rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.9 |
sonusStaticCallAdmnEndPointBShelfA 32-bit integer identifying the shelf of the end point Brw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.10 |
sonusStaticCallAdmnEndPointBSlotA 32-bit integer identifying the slot of the end point Brw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.11 |
sonusStaticCallAdmnEndPointBPortPort index of end point B.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.12 |
sonusStaticCallAdmnEndPointBChannelIndicates the DS0 channel of the end point Brw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.13 |
sonusStaticCallAdmnEndPointBLocalRTPPortIndicates the local RTP port.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.14 |
sonusStaticCallAdmnEndPointBLocalIpAddressThe IP Address of the end point B if it is packetrw IpAddress .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.15 |
sonusStaticCallAdmnEndPointBRemoteRTPPortIndicates the remote RTP port.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.16 |
sonusStaticCallAdmnEndPointBRemoteIpAddressThe IP Address of the end point B if it is packetrw IpAddress .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.17 |
sonusStaticCallAdmnEndPointBServProfileThe service profile used for end point Brw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.18 |
sonusStaticCallAdmnCircuitModeThe circuit mode for this static callrw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.19 |
sonusStaticCallAdmnRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.8.2.1.20 |
sonusStaticCallStatTableThe Manual Call Stat Table SEQUENCE OF SonusStaticCallStatEntry .1.3.6.1.4.1.2879.2.2.2.1.9 |
sonusStaticCallStatEntryAn entry in the Manual Call Stat Table SonusStaticCallStatEntry .1.3.6.1.4.1.2879.2.2.2.1.9.1 |
sonusStaticCallStatIndexThe index for target static call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.9.1.1 |
sonusStaticCallStatCallIdThe call identifier(GCID) assigned to this static callro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.9.1.2 |
sonusStaticCallStatStateThe status of the static callro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.9.1.3 |
sonusStaticCallStatTimeDisplays the Date/time the connection was createdro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.9.1.4 |
sonusStaticCallActionObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.10 |
sonusStaticCallGcidThe call identifier for a call to be deletedrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.10.1 |
sonusStaticCallActionThe action that should be taken on the callrw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.10.2 |
sonusCallTrace OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.11 |
sonusCallTraceNextIndexThe next valid index to use when creating an entry in the sonusCallTraceTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.11.1 |
sonusCallTraceTableThis table specifies the Call Trace Table SEQUENCE OF SonusCallTraceEntry .1.3.6.1.4.1.2879.2.2.2.1.11.2 |
sonusCallTraceEntry SonusCallTraceEntry .1.3.6.1.4.1.2879.2.2.2.1.11.2.1 |
sonusCallTraceIndexThe index of this Call Trace entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.1 |
sonusCallTraceStateThe administrative state of this Call Trace entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.2 |
sonusCallTraceNameThe name of this Call Trace entry.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.3 |
sonusCallTraceTypeThe trace type of this Call Trace entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.4 |
sonusCallTraceCalledNumberThe called number being traced.rw DisplayString .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.5 |
sonusCallTraceCallingNumberThe calling number being traced.rw DisplayString .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.6 |
sonusCallTraceLevelThe trace level of this call trace entry, currently only one level is supported.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.7 |
sonusCallTraceRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.11.2.1.8 |
sonusCktServProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.12 |
sonusCktServProfileNextIndexThe next valid index to use when creating an entry in the sonusCktServProfileTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.1 |
sonusCktServProfileTableThis table specifies the Circuit service profile list for the node. SEQUENCE OF SonusCktServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.12.2 |
sonusCktServProfileEntry SonusCktServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.12.2.1 |
sonusCktServProfileIndexIdentifies the target circuit service profile entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.1 |
sonusCktServProfileStateThe administrative state of this circuit service profile entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.2 |
sonusCktServProfileNameThe name of this circuit service profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.3 |
sonusCktServProfileAudioEncodingThe audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.4 |
sonusCktServProfileBandwidthThe number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.5 |
sonusCktServProfileNecEnableSpecifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the echo chaceller is bypassed.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.6 |
sonusCktServProfileCttTestTypeFor ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7 |
sonusCktServProfileCttTimeoutFor ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.8 |
sonusCktServProfileCttMinDetectTimeFor ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.9 |
sonusCktServProfileCttMinReleaseTimeFor ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.10 |
sonusCktServProfileCapabilitySpecifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.11 |
sonusCktServProfileDataRestrictedCfgSpecifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.12 |
sonusCktServProfileDtmfProfileNameThe name of DTMF profile associated with this circuit service profile.rw SonusNameReference (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.13 |
sonusCktServProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.14 |
sonusCktServProfileInterworkingXfrCapThe transfer capability for audio calls when interworking with CAS. The default transfer capability is speech.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.12.2.1.15 |
sonusPktServProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.13 |
sonusPktServProfileNextIndexThe next valid index to use when creating an entry in the sonusPktServProfileTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.1 |
sonusPktServProfileTableThis table specifies the packet service profile list for the node. SEQUENCE OF SonusPktServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.13.2 |
sonusPktServProfileEntry SonusPktServProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.13.2.1 |
sonusPktServProfileIndexIdentifies the target packet service profile entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.1 |
sonusPktServProfileStateThe administrative state of this packet service profile entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.2 |
sonusPktServProfileNameThe user name of this packet service profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.3 |
sonusPktServProfileDestProtocolSpecifies the Packet Destination Protocal used. GSX - uses Sonus GSX-GSX MCS protocol. h323 - uses H.323 protocol.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.4 |
sonusPktServProfilePrfdAudioEncodingThe preferred audio encoding method to be performed on the packet data received from, and destined to the IP network. The possible options are: G.711, G.711 with Silence Suppression, G.729A and G.729A+B. The default encoding method is G.711. For G.711, the law is determined by Circuit Service Profile.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.5 |
sonusPktServProfilePrfdFramesPerPacketSpecifies the Preferred Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.6 |
sonusPktServProfileDefFramesPerPacketSpecifies the default Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.7 |
sonusPktServProfileDefAudioEnableSpecifies whether or not to allow default Audio (G.711). If enabled, allow use of G.711 if preferred audio resource is not available. If disabled, Do not use of G.711 if preferred audio resource is not available and the call is disconnected.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.8 |
sonusPktServProfileSilenceFactorSpecifies percentage of call time that silence is expected.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.9 |
sonusPktServProfileVInitPlayoutBufDelayThis value defines the size of the initial playout bufferrequired to absorb the maximum expected voice packet delay across the network. Range from 1 ms to 50 ms, in increments of 1 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.10 |
sonusPktServProfileFaxRelayIf never is specified, Fax Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, Fax Relay is used if the compressed resource is available. If always is specified, Fax Relay is used regardless of the audio encoding method.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.11 |
sonusPktServProfileDtmfRelayIf never is specified, DTMF Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, DTMF Relay is used if the compressed resource is available. If always is specified, DTMF Relay is used regardless of the audio encoding method.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.12 |
sonusPktServProfileFallbackHandlingThis specifies the behavior when a compressed codec call needs to revert to G.711 (e.g., to pass modem data) and there is no bandwidth available.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.13 |
sonusPktServProfileTosValueSpecifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.14 |
sonusPktServProfileDInitPlayoutBufDelayThis value defines the size of the initial playout buffer required to absorb the maximum expected data packet delay across the network. Range from 5 ms to 50 ms, in increments of 1 ms. The default value is 50 ms.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.15 |
sonusPktServProfileDataRtpPayloadTypeSpecifies the RTP payload type to be included in the RTP header of the data packetrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.16 |
sonusPktServProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.17 |
sonusPktServProfileG711SendSidPacketsSpecifies whether sending SID packets is enabled. This applies only if preferred audio encoding is G.711 with silence suppression.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.18 |
sonusPktServProfileG711SidRtpPayloadTypeSpecifies G.711 SID RTP payload type. This applies only if preferred audio encoding is G.711 with silence suppression. Range 0 to 127.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.19 |
sonusPktServProfileSidHeartbeatSpecifies whether sending SID heartbeat packets is enabled. This applies if preferred audio encoding is either G.711 with silence suppression or G.729A+B.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.20 |
sonusPktServProfileRtcpSpecifies whether RTCP is enabled for the call.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.21 |
sonusPktServProfilePacketLossThresholdSpecifies the RTCP packet loss threshold in packets/100,000. 0 means no detection. Requires RTCP to be enabled.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.22 |
sonusPktServProfilePacketLossActionSpecifies the action taken when the packet loss threshold is exceeded. Requires RTCP to be enabled.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.23 |
sonusPktServProfileRtpPeerAbsenceActionSpecifies the action taken when the RTP peer is detected to be absent (due to lack of RTP and RTCP packets). Requires RTCP to be enabled.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.24 |
sonusPktServProfileDtmfRelayOutOfBandSpecifies whether out of band DTMF relay is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.25 |
sonusPktServProfileDtmfRelayRemoveDigitsSpecifies whether removing DTMF digits from the media stream is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always .rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.13.2.1.26 |
sonusDisconnectTreatmentObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.14 |
sonusDiscTreatProfile OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.14.1 |
sonusDiscTreatProfileNextIndexThe next valid index to use when creating an entry in the sonusDiscTreatProfileTable.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.1.1 |
sonusDiscTreatProfileTableThis table contains Disconnect Treatment Profiles for the node. SEQUENCE OF SonusDiscTreatProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.14.1.2 |
sonusDiscTreatProfileEntry SonusDiscTreatProfileEntry .1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1 |
sonusDiscTreatProfileIndexIdentifies the Disconnect Treatment Profile. Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.1 |
sonusDiscTreatProfileNameThe user name of this Disconnect Treatment Profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.2 |
sonusDiscTreatProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.3 |
sonusDiscTreatmentAdmnTable SEQUENCE OF SonusDiscTreatmentAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.2 |
sonusDiscTreatmentAdmnEntry SonusDiscTreatmentAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.2.1 |
sonusDiscTreatmentProfileIndexIdentifies the Disconnect Treatment Profile to which this entry belongs. Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.2.1.1 |
sonusDiscTreatmentIndexIdentifies the target Disconnect Treatment entry. Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.2.1.2 |
sonusDiscTreatmentReasonDisconnect Reason Code.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.2.1.3 |
sonusDiscTreatmentSigSeqProfileNameFor given Disconnect Treatment Profile and Disconnect Reason Code, execute this Disconnect SSP.rw SonusNameReference (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.2.1.4 |
sonusDiscTreatmentRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.2.1.5 |
sonusDiscSspGroupAdmn OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.14.3 |
sonusDiscSspNextIndexThe next valid index to use when creating a new sonusDiscSspGroupAdmnEntryro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.3.1 |
sonusDiscSspAdmnTable SEQUENCE OF SonusDiscSspAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.3.2 |
sonusDiscSspAdmnEntry SonusDiscSspAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1 |
sonusDiscSigSeqProfileIndexIdentifies the target Disconnect Signal Sequence Profile. Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.1 |
sonusDiscSigSeqProfileNameThe user name of this Disconnect Signal Sequence Profile.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.2 |
sonusDiscSigSeqProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.3 |
sonusDiscSigSeqAdmnTable SEQUENCE OF SonusDiscSigSeqAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.4 |
sonusDiscSigSeqAdmnEntry SonusDiscSigSeqAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.14.4.1 |
sonusDiscSigSequenceProfileIndex Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.1 |
sonusDiscSigSequenceIndex Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.2 |
sonusDiscSigSequencePositionrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.3 |
sonusDiscSigSequenceTokenrw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.4 |
sonusDiscSigSequenceParam1rw DisplayString .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.5 |
sonusDiscSigSequenceParam2rw DisplayString .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.6 |
sonusDiscSigSequenceAdminStaterw SonusAdminState (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.7 |
sonusDiscSigSequenceRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.14.4.1.8 |
sonusTestCall OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.15 |
sonusTestCallNextIndexThe next valid index to use when creating an entry in the sonusTestCallAdmnTablero Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.1 |
sonusTestCallAdmnTableThis table specifies the test call list for the node. SEQUENCE OF SonusTestCallAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.15.2 |
sonusTestCallAdmnEntry SonusTestCallAdmnEntry .1.3.6.1.4.1.2879.2.2.2.1.15.2.1 |
sonusTestCallAdmnIndexIdentifies the target test call entry.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.1 |
sonusTestCallAdmnStateThe administrative state of this test call entry.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.2 |
sonusTestCallAdmnNameThe user name of this test call.rw SonusName (SONUS-TC) .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.3 |
sonusTestCallAdmnEndPointShelfA 32-bit integer identifying the shelf of the end pointrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.4 |
sonusTestCallAdmnEndPointSlotA 32-bit integer identifying the slot of the end pointrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.5 |
sonusTestCallAdmnEndPointPortPort index of end point.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.6 |
sonusTestCallAdmnEndPointChannelIndicates the DS0 channel of the end point.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.7 |
sonusTestCallAdmnRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.8 |
sonusTestCallAdmnTypeThe circuit type for this test call.rw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.9 |
sonusTestCallAdmnPowerThe power in dBm of the tone to play.rw Integer32 (-50..3) .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.10 |
sonusTestCallAdmnFrequencyThe frequency in Hz of the tone to play or listen for.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.11 |
sonusTestCallAdmnStatPowerThe dBm of the tone received in LISTEN mode.rw Integer32 (-1000..3) .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.12 |
sonusTestCallAdmnStatPowerTenthsThe tenths of dBm of the tone received in LISTEN mode.rw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.15.2.1.13 |
sonusTestCallStatTableThe Manual Call Stat Table SEQUENCE OF SonusTestCallStatEntry .1.3.6.1.4.1.2879.2.2.2.1.16 |
sonusTestCallStatEntryAn entry in the Manual Call Stat Table SonusTestCallStatEntry .1.3.6.1.4.1.2879.2.2.2.1.16.1 |
sonusTestCallStatIndexThe index for target test call.ro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.16.1.1 |
sonusTestCallStatCallIdThe call identifier(GCID) assigned to this test callro Integer32 .1.3.6.1.4.1.2879.2.2.2.1.16.1.2 |
sonusTestCallStatStateThe status of the test callro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.16.1.3 |
sonusTestCallStatTimeDisplays the Date/time the connection was createdro DisplayString .1.3.6.1.4.1.2879.2.2.2.1.16.1.4 |
sonusTestCallActionObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.1.17 |
sonusTestCallGcidThe call identifier for a call to be deletedrw Integer32 .1.3.6.1.4.1.2879.2.2.2.1.17.1 |
sonusTestCallActionThe action that should be taken on the callrw Enumeration .1.3.6.1.4.1.2879.2.2.2.1.17.2 |
sonusNodeResourcesMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.2 |
sonusNodeResourcesMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.2.0 |
sonusNodeResourcesCallAdmissionSuspendedNotificationThis trap indicates that call admission into the GSX has been suspended. Information provided by this trap includes the reason why call admission has been suspended. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.2.2.0.1 |
sonusNodeResourcesCallAdmissionEnabledNotificationThis trap indicates that call admission into the GSX has been enabled. Information provided by this trap includes the reason why call admission has been enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.2.2.0.2 |
sonusNodeResourcesCallTraceHitNotificationThis trap indicates that call trace filter had a hit. Information provided by this trap includes the called number and the calling number. NOTIFICATION-TYPE .1.3.6.1.4.1.2879.2.2.2.2.0.3 |
sonusNodeResourcesMIBNotificationsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2879.2.2.2.2.1 |
sonusCallAdmissionChangeReasonThe reason why the call admission control state has changes.ro DisplayString .1.3.6.1.4.1.2879.2.2.2.2.1.1 |