SNI-MYLEX-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
182
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
182 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
IMPORTS Unknown .1.3.6.1.4.1.231 |
sniProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.2 |
sniExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10 |
sniServerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2 |
mylexAutoRebuildStartedAutomatic rebuild was started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.200 |
mylexManualRebuildStartedManual rebuild was started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.201 |
mylexRebuildDoneRebuild successfully completed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.202 |
mylexRebuildCanceledRebuild cancelled TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.203 |
mylexRebuildStatusRebuild status TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.204 |
mylexRebuildErrorRebuild error, bad blocks detected TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.205 |
mylexRebuildNewDeviceFailedRebuild finished, new device failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.206 |
mylexRebuildLogicalDriveFailedRebuild finished, logical drive failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.207 |
mylexParityCheckStartedParity check was started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.208 |
mylexParityCheckDoneParity check successfully completed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.209 |
mylexParityCheckCanceledParity check cancelled TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.210 |
mylexParityCheckStatusParity check status TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.211 |
mylexParityCheckErrorParity check error, bad blocks detected TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.212 |
mylexParityCheckLogicalDriveFailedParity check finished, logical drive failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.213 |
mylexLogicalDriveOfflineLogical drive went offline TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.214 |
mylexLogicalDriveCriticalLogical drive went critical TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.215 |
mylexLogicalDriveOnlineLogical drive went online TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.216 |
mylexPhysicalDeviceDiedPhysical device died TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.217 |
mylexPhysicalDeviceAlivePhysical device online TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.218 |
mylexWriteBackErrorWrite back error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.219 |
mylexStateChangeTableFullState-change table threshold reached TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.220 |
mylexAdapterDiedAdapter died TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.221 |
mylexAutoRebuildStarted2Automatic rebuild was started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.222 |
mylexManualRebuildStarted2Manual rebuild was started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.223 |
mylexRebuildDone2Rebuild successfully completed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.224 |
mylexRebuildCanceled2Rebuild cancelled TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.225 |
mylexRebuildError2Rebuild error, bad blocks detected TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.226 |
mylexRebuildNewDeviceFailed2Rebuild finished, new device failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.227 |
mylexRebuildLogicalDriveFailed2Rebuild finished, logical drive failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.228 |
mylexInitializationStartedSystem drive initialization started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.229 |
mylexInitializationDoneSystem drive initialization done TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.230 |
mylexInitializationCanceledSystem drive initialization canceled TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.231 |
mylexInitializationFailedSystem drive initialization failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.232 |
mylexSystemDriveCreatedNew system drive created TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.233 |
mylexSystemDriveDeletedSystem drive deleted TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.234 |
mylexRaidExpansionStartedRAID capacity expansion started TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.235 |
mylexRaidExpansionDoneRAID capacity expansion successfully finished TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.236 |
mylexRaidExpansionFailedRAID capacity expansion failed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.237 |
mylexSystemDriveBadBlockBad block(s) detected on system drive TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.238 |
mylexSystemDriveSizeChangedSystem drive size was changed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.239 |
mylexRaidTypeChangedSystem drive RAID type was changed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.240 |
mylexPhysicalDeviceHotsparePhysical device now hotspare (standby) TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.250 |
mylexPhysicalDeviceHardErrorPhysical device hard error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.251 |
mylexPhysicalDeviceSoftErrorPhysical device soft error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.252 |
mylexPhysicalDeviceParityErrorPhysical device parity error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.253 |
mylexPhysicalDeviceMiscErrorPhysical device miscellaneous error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.254 |
mylexPhysicalDevicePrefailurePhysical device prefailure TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.255 |
mylexPhysicalDeviceUnconfiguredPhysical device unconfigured TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.256 |
mylexPhysicalDeviceAddedPhysical device added TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.257 |
mylexPhysicalDeviceRemovedPhysical device removed TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.258 |
mylexWriteBackError2Write back error TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.260 |
mylexGamDriverMissingMylex GAM driver missing or failed to start TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.261 |
mylexGamDriverIncorrectVersionMylex GAM driver does not have the correct version TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.262 |
mylexSMARTFailurePredictedSent if a failure (S.M.A.R.T) has been predicted on a physical disk. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.270 |
mylexSMARTConfigurationChangedS.M.A.R.T configuration has been changed. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.271 |
mylexBBUFoundBattery Backup Unit found TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.275 |
mylexBBUPowerLowBattery Backup Unit power is low TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.276 |
mylexBBUPowerOKBattery Backup Unit power is OK TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.277 |
sniInventory OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.1 |
sniCommon OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2 |
sniBios OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.1 |
sniEisa OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.2 |
sniHd OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.3 |
sniBus OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.4 |
sniServerControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.5 |
sniPcSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.3 |
sniScb OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.4 |
sniOsSpecific OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.5 |
sniNetware OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.5.1 |
sniWinNt OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.5.2 |
sniOs2 OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.5.3 |
sniUnix OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.5.4 |
sniOemComponents OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6 |
sniOemDpt OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6.1 |
sniOemMylex OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6.2 |
sniMlxDiskArray OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6.2.1 |
sniMylexAgentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6.2.1.1 |
mylexAgentIdMylex SNMP agent ID stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.1.1 |
mylexAgentCompanyMylex SNMP agent company stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.1.2 |
mylexAgentVersionMylex SNMP agent version stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.1.3 |
mylexAgentBuildMylex SNMP agent build date and time stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.1.4 |
mylexAgentVersionMajorMylex SNMP agent major version numberro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.1.5 |
mylexAgentVersionMinorMylex SNMP agent minor version number (to be displayed with 2 digits)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.1.6 |
mylexApiLastErrorMsgMessage string of last error occurred with Mylex APIro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.1.7 |
mylexApiReleaseMylex API library release numberro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.1.8 |
mylexApiRevisionMylex API library revision numberro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.1.9 |
mylexAdapterHostTableMylex adapter host information table.
Only for SCSI-to-SCSI adapters (DAC960SX).
Defines for each Mylex adapter to which host controller,
bus and target the adapter is connected to. SEQUENCE OF MylexAdapterHost .1.3.6.1.4.1.231.2.10.2.6.2.1.2 |
mylexAdapterHost MylexAdapterHost .1.3.6.1.4.1.231.2.10.2.6.2.1.2.1 |
mylexAdapterNumAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.1 |
mylexAdapterHostTargetIdTarget ID of the Mylex SCSI-to-SCSI Adapter.
Will be 0xFFFF for local adapters.ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.2 |
mylexAdapterHostChannelNumberSCSI host channel number the Mylex SCSI-to-SCSI Adapter
is connected to; will be 0 for local adapters.ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.3 |
mylexAdapterHostControllerNumberSCSI host controller number the Mylex SCSI-to-SCSI Adapter
is connected to; will be 0 for local adapters.ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.2.1.4 |
mylexAdapterInfoTableMylex Adapter Info table SEQUENCE OF MylexAdapterInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.3 |
mylexAdapterInfoEntryMylex Adapter Info table entry MylexAdapterInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1 |
mylexAdapterInfoIdAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.1 |
mylexModelAdapter model/submodelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.2 |
mylexCacheSizeSize of cache RAM module (kBytes); -1 if unknownro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.3 |
mylexBaseAddressI/O base address (-1 if unknown)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.4 |
mylexBusTypeBus type (EISA/MCAS/PCI ...)ro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.9 |
mylexInterruptIRQInterrupt request line (IRQ); -1 if unknownro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.10 |
mylexFirmwareVersionFirmware versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.11 |
mylexBIOSVersionBIOS versionro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.12 |
mylexDefaultRebuildRateDefault rebuild/check rate (%)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.13 |
mylexNumChannelsCurrent number of channelsro Gauge .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.14 |
mylexMaxChannelsMaximum number of channelsro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.15 |
mylexNumLogicalDrivesCurrent number of logical drivesro Gauge .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.16 |
mylexMaxLogicalDrivesMaximum logical drivesro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.17 |
mylexNumPhysicalDevicesCurrent number of physical devicesro Gauge .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.18 |
mylexMaxPhysicalDevicesMaximum physical devicesro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.19 |
mylexStripeSizeStripe Size (8K chunks)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.20 |
mylexFlashEEpromSizeSize of flash EEPROM (kBytes)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.21 |
mylexPhysicalSectorSizeSize of a physical sector (Bytes)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.22 |
mylexLogicalSectorSizeSize of logical sector (Bytes)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.23 |
mylexSlotNumberSlot number the adapter is inro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.24 |
mylexVendorNameName of the adapter vendorro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.3.1.25 |
mylexPhysicalDeviceInfoTablePhysical device info table SEQUENCE OF MylexPhysicalDeviceInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.4 |
mylexPhysicalDeviceInfoEntryPhysical device info table entry MylexPhysicalDeviceInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1 |
mylexPhysicalDeviceAdapterIdAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.1 |
mylexPhysicalDeviceChannelNrChannel number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.2 |
mylexPhysicalDeviceDevNrPhysical device number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.3 |
mylexPhysicalDeviceModelPhysical device model namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.5 |
mylexPhysicalDeviceCapacityDisk capacity (MBytes; only for configured DAC disks)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.6 |
mylexPhysicalDeviceStatusDisk status (only for configured DAC disks)ro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.7 |
mylexPhysicalDeviceRebuildRateRebuild rate (only for configured DAC disks)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.8 |
mylexPhysicalDeviceParityErrorsParity error count (only for configured DAC disks)ro Counter .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.9 |
mylexPhysicalDeviceSoftErrorsSoft error count (only for configured DAC disks)ro Counter .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.10 |
mylexPhysicalDeviceHardErrorsHardware error count (only for configured DAC disks)ro Counter .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.11 |
mylexPhysicalDeviceMiscErrorsMiscellaneous error count (only for configured DAC disks)ro Counter .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.12 |
mylexPhysicalDeviceDiskConfiguredDevice is a configured DAC diskro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.13 |
mylexPhysicalDeviceScsiDeviceTypeSCSI device typero Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.14 |
mylexPhysicalDeviceParamFastScsiSCSI device parameter: Fast SCSIro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.15 |
mylexPhysicalDeviceParamWideScsiSCSI device parameter: Wide SCSIro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.16 |
mylexPhysicalDeviceParamTaggedQueueingSCSI device parameter: Tagged queueingro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.17 |
mylexPhysicalDeviceSmartCompliantIs this device SMART (Self Monitoring Analysis and Reporting Technology)
compliant? If SMART information cannot be obtained, false(2) must be reported.ro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.18 |
mylexPhysicalDeviceSmartMonitoringIn write mode, only enable and disable are allowed.
An error will be reported if you try to enable a non Smart
compliant device.
In read mode, not-available(3) is returned if the device is not Smart
compliant. Disable will be reported, if one option or more
has changed after the initial configuration of the agent.rw Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.19 |
mylexPhysicalDeviceSmartStatusIf not SmartCompliant or SmartMonitoring disabled,
not-available(3) must be reported.ro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.4.1.20 |
mylexLogicalInfoTableLogical drive info table SEQUENCE OF MylexLogicalInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.5 |
mylexLogicalInfoEntryLogical drive info table entry MylexLogicalInfoEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1 |
mylexLogicalInfoAdapterIdAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.1 |
mylexLogicalInfoLogDrvNumLogical drive number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.2 |
mylexLogicalInfoStatusLogical drive statusro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.3 |
mylexLogicalInfoSizeActual size of drive at RAID level (MBytes)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.4 |
mylexLogicalInfoTotalSizeTotal physical size (MBytes)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.5 |
mylexLogicalInfoRaidLevelDrive RAID levelro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.6 |
mylexLogicalInfoWriteBackCache write back / write throughro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.5.1.7 |
mylexLogicalDriveContentsTableTable of physical devices that belong to a logical drive SEQUENCE OF MylexLogicalDriveContentsEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.6 |
mylexLogicalDriveContentsEntryTable entry of physical devices that belong to a logical drive MylexLogicalDriveContentsEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1 |
mylexLogicalDriveContentsAdapterIdAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.1 |
mylexLogicalDriveContentsLogDrvNumLogical drive number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.2 |
mylexLogicalDriveContentsPhysIndexPhysical device number belonging to this logical drive (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.3 |
mylexLogicalDriveContentsChannelNrChannel number of the physical devicero INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.4 |
mylexLogicalDriveContentsPhysDevNrSCSI Id of the physical devicero INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.6.1.5 |
mylexAdapterGeneralStatusTableTable of general adapter status SEQUENCE OF MylexAdapterGeneralStatusEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.7 |
mylexAdapterGeneralStatusEntryTable entry of general adapter status MylexAdapterGeneralStatusEntry .1.3.6.1.4.1.231.2.10.2.6.2.1.7.1 |
mylexAdapterGeneralStatusAdapterIdAdapter number (index)ro INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.1 |
mylexAdapterGeneralStatusGeneral adapter statusro Enumeration .1.3.6.1.4.1.231.2.10.2.6.2.1.7.1.2 |
mylexTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.6.2.1.8 |
mylexTrapTimeTrap time (in seconds since 1/1/1970) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.1 |
mylexRebuildOldDeviceDevice number of the failed physical disk that enforced a rebuild INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.2 |
mylexRebuildOldChannelChannel number of the failed physical disk that enforced a rebuild INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.3 |
mylexRebuildNewDeviceDevice number of the new physical disk while rebuild INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.4 |
mylexRebuildNewChannelChannel number of the new physical disk while Rebuild INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.5 |
mylexStatusCurrentDriveNumber of the current logical drive being rebuilt/checked INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.6 |
mylexStatusCurrentDriveSizeSize of current logical drive being rebuilt/checked (MBytes) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.7 |
mylexStatusBlocksRemainingBlocks remaining while rebuild/check (MBytes) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.8 |
mylexBadBlocksNumber of bad blocks after rebuild/check error INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.9 |
mylexLogicalDriveLogical drive number (in a logical drive trap) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.10 |
mylexPhysDevicePhysical device number (in a physical device trap) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.11 |
mylexPhysChannelPhysical channel number (in a physical device trap) INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.12 |
mylexTrapServerNameServer name this trap comes from DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.8.13 |
mylexTrapSlotNumberSlot number of the adapter generating this trap INTEGER .1.3.6.1.4.1.231.2.10.2.6.2.1.8.14 |
mylexTrapString1General purpose string 1 for trap parameters DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.8.15 |
mylexTrapString2General purpose string 2 for trap parameters DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.6.2.1.8.16 |
sniSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.7 |
sniSmSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.7.1 |
sniServerView OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.8 |
sniTrapMib OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.5 |
More MIBs from Sni
Browse all SniMIBs →SHE-BRIDGE-MIB
SNMP MIB module
1862 objects→
FSC-RAID-MIB
Standard SNMP MIB module defining data structures for FSC-RAID-MIB.
1229 objects→
XLDV20-MIB
SNMP MIB module
894 objects→
SHE-ADSL-MIB
The SHE-ADSL-MIB extends the standard ADSL-LINE-MIB to monitor proprietary ADSL line, physical layer, and channel performance metrics, including signal attenuation, noise margins, error counts, and configuration profiles for ATUC and ATUR interfaces. It facilitates granular management of ADSL line configurations, alarm thresholds, and traffic profiles via specific tables for physical parameters, performance data intervals, and virtual circuit types.
870 objects→
SHE-XDSL-MIB
SNMP MIB module
841 objects→
FSC-HPI-MIB
Standard SNMP MIB module defining data structures for FSC-HPI-MIB.
606 objects→