SL-SNTP-MIB
The SL-SNTP-MIB module enables monitoring and management of Simple Network Time Protocol (SNTP) client configurations and operational states on Schneider Electric network devices, specifically tracking synchronization status, stratum levels, and time source associations.
Imported Objects
Objects
21 total| Object Name |
|---|
slSntpThis MIB module describes the SNTP Client MODULE-IDENTITY .1.3.6.1.4.1.4515.1.3.21 |
slSntpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.21.1 |
slSntpConfigModeCurrent operational mode of SNTP clientrw Enumeration .1.3.6.1.4.1.4515.1.3.21.1.1 |
slSntpConfigPollIntervalPeriod of time (in seconds) between succesive attempts to
perform an update via SNTPrw Integer32 .1.3.6.1.4.1.4515.1.3.21.1.2 |
slSntpConfigRetryCountThe number of query attempts the SNTP client should perform before reporting
that the SNTP client cannot communicate with the peer.rw INTEGER .1.3.6.1.4.1.4515.1.3.21.1.3 |
slSntpConfigTimeZoneThe time zone this node is currently located in, expressed as
as an hours offset to the GMT (-12..+12).
Note: Daylight savings time is not automatically calculated.rw INTEGER .1.3.6.1.4.1.4515.1.3.21.1.4 |
slSntpConfigDayLightSavingIt specifies if daylight saving time is applicable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.21.1.5 |
slSntpConfigFractTimeZoneThe fractional part of the timezone specified in minutes (-60..+60).rw INTEGER .1.3.6.1.4.1.4515.1.3.21.1.6 |
slSntpConfigTableA table containing trusted SNTP servers to be queried in
unicast mode SEQUENCE OF SlSntpConfigEntry .1.3.6.1.4.1.4515.1.3.21.1.10 |
slSntpConfigEntryA trusted server and its expected version number SlSntpConfigEntry .1.3.6.1.4.1.4515.1.3.21.1.10.1 |
slSntpConfigAddressIp Address of a trusted SNTP server.rw IpAddress .1.3.6.1.4.1.4515.1.3.21.1.10.1.1 |
slSntpConfigVersionProtocol version used by this SNTP serverrw Integer32 .1.3.6.1.4.1.4515.1.3.21.1.10.1.2 |
slSntpConfigPriorityPriority given to this server.rw Integer32 .1.3.6.1.4.1.4515.1.3.21.1.10.1.3 |
slSntpConfigRowStatusThe Status of this SNTP server information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.21.1.10.1.4 |
slSntpConfigMaxVarianceThe variance expressed as the number of milliseconds between client and
peer which will trigger an alarm. This is useful in determining if the
historical data recorded in NOVRAM for statistics trending or timestamps
used for traps is outside the configured variance parameter.rw INTEGER .1.3.6.1.4.1.4515.1.3.21.1.10.1.5 |
slSntpConfigVarianceThe amount of time expressed as the number of milliseconds delta between
client and peer.ro INTEGER .1.3.6.1.4.1.4515.1.3.21.1.10.1.6 |
slSntpConfigVarianceDetectEnableUsed to enable or disable variance threshold alarms.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.21.1.10.1.7 |
slSntpConfigServerStatusThe status of this srever.ro Enumeration .1.3.6.1.4.1.4515.1.3.21.1.10.1.8 |
slSntpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.21.2 |
slSntpPeerFailureTrapThe SNTP Client is unable to communicate with the NTP Server which
has been configured. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.21.2.1 |
slSntpConfigVarianceTrapThe difference in time between client and peer exceeds the configured
variance. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.21.2.2 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.