SL-SECU-MIB
Imported Objects
Objects
24 total| Object Name |
|---|
slSecuMibThis security module. This mib is used to configure the firewall. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.3.24 |
slSecuGen OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.24.1 |
slSecuFirewallEnableGeneral Enable/Disable of the firewall operation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.24.1.1 |
slSecuSelect OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.24.2 |
slSecuSelectTableThe security protocol selection table. SEQUENCE OF SlSecuSelectEntry .1.3.6.1.4.1.4515.1.3.24.2.1 |
slSecuSelectEntryAn entry in the security selection table. SlSecuSelectEntry .1.3.6.1.4.1.4515.1.3.24.2.1.1 |
slSecuSelectTypeThe secutity protocol type SlSecuType .1.3.6.1.4.1.4515.1.3.24.2.1.1.1 |
slSecuSelectPortThe corresponding port number of the protocol.
Port number 0 is used when not applicable/available.ro INTEGER .1.3.6.1.4.1.4515.1.3.24.2.1.1.2 |
slSecuSelectEnableTrue - Enables the firewall for the corresponding protocol.
False - Dsables the firewall for the corresponding protocol.
When enabled the firewall blocks the protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.24.2.1.1.3 |
slSecuWl OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.24.3 |
slSecuWlTableThis white list table. SEQUENCE OF SlSecuWlEntry .1.3.6.1.4.1.4515.1.3.24.3.1 |
slSecuWlEntryA particular IP address. SlSecuWlEntry .1.3.6.1.4.1.4515.1.3.24.3.1.1 |
slSecuWlIpThe IP address to allowro IpAddress .1.3.6.1.4.1.4515.1.3.24.3.1.1.1 |
slSecuWlMaskIndicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the slSecuWlIp field.ro IpAddress .1.3.6.1.4.1.4515.1.3.24.3.1.1.2 |
slSecuWlStatusThe row status variable, used according to
row installation and removal conventions.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.24.3.1.1.3 |
slSecuEncryption OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.24.4 |
slSecuEncryptionTableThe encryption table. This table has an entry per transponder. SEQUENCE OF SlSecuEncryptionEntry .1.3.6.1.4.1.4515.1.3.24.4.1 |
slSecuEncryptionEntryThis entry is used to control the necryption per transponder. SlSecuEncryptionEntry .1.3.6.1.4.1.4515.1.3.24.4.1.1 |
slSecuEncryptionIfIndexThe Interface Index of the uplink port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.3.24.4.1.1.1 |
slSecuEncryptionEnableEnable/Disable the encryption on this uplink.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.24.4.1.1.2 |
slSecuEncryptionStatusThe state of the encryption finite state machine.ro Enumeration .1.3.6.1.4.1.4515.1.3.24.4.1.1.3 |
slSecuEncryptionForceInitWriting this valiable forces init to the encryption state machine.rw INTEGER .1.3.6.1.4.1.4515.1.3.24.4.1.1.4 |
slSecuEncryptionPreSharedThe pre-shared secret.
Either the pre-shared key, or the shared secret to avoid Mitm when using DH public key exchange.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.24.4.1.1.5 |
slSecuEncryptionKeyExchangePeriodThe Key Exchage Period, specified in minutes.
The value 0 means to perform the key exchange only once at link establishment.rw INTEGER .1.3.6.1.4.1.4515.1.3.24.4.1.1.6 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.