SL-ROADM-MIB
AI MIB Summary
The SL-ROADM-MIB module enables the monitoring and management of Reconfigurable Optical Add-Drop Multiplexer (ROADM) hardware, specifically tracking optical path states, port configurations, and attenuation levels within dense wavelength division multiplexing (DWDM) networks.
This MIB module describes the ROADM
Main OID:
slROADM.1.3.6.1.4.1.4515.1.1.16
35
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
35 total| Object Name |
|---|
slROADMThis MIB module describes the ROADM MODULE-IDENTITY .1.3.6.1.4.1.4515.1.1.16 |
slROADMConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.16.1 |
slWSSConfigTableThe ROADM Configuration table. SEQUENCE OF SlWSSConfigEntry .1.3.6.1.4.1.4515.1.1.16.1.1 |
slWSSConfigEntryAn entry in the WSS Configuration table. SlWSSConfigEntry .1.3.6.1.4.1.4515.1.1.16.1.1.1 |
slWSSConfigLineIndexOnly one entry in the table.
Thus this is a dummy ifIndex that equals to 1.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.1.16.1.1.1.1 |
slWSSConfigOperStatusThe WSS operational status. 0 - DOWN, 1 - UP.ro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.2 |
slWSSConfigSwitchTempThe switch temperature in 0.1 celsiusro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.3 |
slWSSConfigBoardTempThe board temperature in 0.1 celsiusro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.4 |
slWSSConfigCaseTempThe case temperature in 0.1 celsiusro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.5 |
slWSSConfigUptimeThe case temperature in 0.1 celsiusro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.6 |
slWSSConfigComFirstWlThe channel numberrw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.7 |
slWSSConfigComChCountThe overall count of channels in the Waveplan.
The channels are ordered in increasing frequency (decreasing wavelength).rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.8 |
slWSSConfigPowerLevelThe received Destination Access Point Identifier.ro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.9 |
slWSSConfigAttenLevelThe received Source Access Point Identifier.ro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.10 |
slWSSConfigEqualizationThreshLevelThe equalization threshold level.
In manual mode if the TX power is below this threshold an alarm is declared against this channel.
Legal values are -8dBm to -23dBm (default -13dBm).rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.1.1.11 |
slWSSConfigEqualizationMethodThe equalization method:
1 - manual equlization to predefined value (default mode).
2 - automatic equlizationrw Enumeration .1.3.6.1.4.1.4515.1.1.16.1.1.1.12 |
slWSSConfigSpacingThe spacing supported by the ROADM.ro Enumeration .1.3.6.1.4.1.4515.1.1.16.1.1.1.13 |
slROCHConfigTableThe ROADM Channel Configuration table. SEQUENCE OF SlROCHConfigEntry .1.3.6.1.4.1.4515.1.1.16.1.2 |
slROCHConfigEntryAn entry in the ROADM Configuration table. SlROCHConfigEntry .1.3.6.1.4.1.4515.1.1.16.1.2.1 |
slROCHConfigLineIndexThe ifIndex of the channel.
Channels 1-100 for the 100 GHz spacing cannels (e.g. 17 for CH17).
Channels 101-200 for the 50 GHz spacing channels (e.g. 117 for CH 17.5).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.1.16.1.2.1.1 |
slROCHConfigProvisioningThe channel provisioningrw ROCHProvisioningType .1.3.6.1.4.1.4515.1.1.16.1.2.1.2 |
slROCHConfigInPowerLevelThe Power Level of the channel equal to Out Power Level + Attenuationro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.3 |
slROCHConfigOutPowerLevelThe Output Power Level of the channelro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.4 |
slROCHConfigChannelDetectChannel detect indication. 0 - not detected, 1 - channel is detectedro INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.5 |
slROCHConfigChPowerFailHighThreshThe threshold for channel High Power Failure.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.6 |
slROCHConfigChPowerFailLowThreshThe threshold for channel Low Power Failure.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.7 |
slROCHConfigChPowerDegHighThreshThe threshold for channel High Power Degrade.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.8 |
slROCHConfigChPowerDegLowThreshThe threshold for channel Low Power Degrade.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.9 |
slROCHConfigChPowerHystHighThreshThe threshold for channel High Power Hysteresis.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.10 |
slROCHConfigChPowerHystLowThreshThe threshold for channel Low Power Hysteresis.
Setting this value applies to all channels.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.11 |
slROCHConfigChAliasThe alias for the channel. The dfault is the empty stringrw DisplayString .1.3.6.1.4.1.4515.1.1.16.1.2.1.12 |
slROCHConfigChAliasSmmThe alias for the channel as given by the SMM. The dfault is the empty stringrw DisplayString .1.3.6.1.4.1.4515.1.1.16.1.2.1.13 |
slROCHConfigProvisioningNewThe channel provisioning.
A bitmask with each bit for the corresponding port.
Bit n ON means that the channel is added/dropped from/to port number n+1.rw INTEGER .1.3.6.1.4.1.4515.1.1.16.1.2.1.14 |
slROADMPm OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.16.2 |
slROADMTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.16.3 |