SL-RETIMER-MIB
The SL-RETIMER-MIB module provides management and monitoring capabilities for Sercomm retimer devices, specifically tracking signal integrity metrics such as retimer status, error counts, and link performance parameters to ensure high-speed data transmission reliability.
Imported Objects
Objects
15 total| Object Name |
|---|
slRetimerThis MIB module describes the Retimer MODULE-IDENTITY .1.3.6.1.4.1.4515.1.1.14 |
slRetimerConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.14.1 |
slRetimerConfigTableThe Retimer Configuration table. SEQUENCE OF SlRetimerConfigEntry .1.3.6.1.4.1.4515.1.1.14.1.1 |
slRetimerConfigEntryAn entry in the Retimer Configuration table. SlRetimerConfigEntry .1.3.6.1.4.1.4515.1.1.14.1.1.1 |
slRetimerLineIndexThis object should be made equal to the ifIndex of the SFP.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.1.14.1.1.1.1 |
slRetimerResetPmCountersSetting this object to 1 reset the current interval PM
counters of the retimer.rw INTEGER .1.3.6.1.4.1.4515.1.1.14.1.1.1.2 |
slRetimerStat OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.14.2 |
slRetimerPm OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.14.3 |
slRetimerCurrentTableThe Ethernet current table contains various statistics
being collected for the current 15 minute
interval. SEQUENCE OF SlRetimerCurrentEntry .1.3.6.1.4.1.4515.1.1.14.3.1 |
slRetimerCurrentEntryAn entry in the Retimer Current table. SlRetimerCurrentEntry .1.3.6.1.4.1.4515.1.1.14.3.1.1 |
slRetimerCurrentIndexThe index value which uniquely identifies the
Ethernet interface to which this entry is applicable.
The interface identified by a particular value of
this index is the same interface as identified by
the same value as a the ifIndex of the SFP.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.1.14.3.1.1.1 |
slRetimerCurrentRxRllESThe total number of Errored Seconds with RLL error.ro INTEGER .1.3.6.1.4.1.4515.1.1.14.3.1.1.2 |
slRetimerCurrentRxK285ESThe total number of Errored Seconds with K28.5 error.ro INTEGER .1.3.6.1.4.1.4515.1.1.14.3.1.1.3 |
slRetimerTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.1.14.7 |
slRetimerStatusChange NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.1.14.7.1 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.