SL-PORT-MIB
The SL-PORT-MIB module provides SNMP access to monitor the operational status and state of physical network ports on Allied Telesis switches. It enables administrators to track port-level metrics such as link state, speed, duplex settings, and error counters for troubleshooting connectivity issues.
Imported Objects
Objects
17 total| Object Name |
|---|
slPortThis MIB module describes the Leds. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.3.14 |
slPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.14.1 |
slPortConfigTableThis table describe the state of the LEDs. SEQUENCE OF SlPortConfigEntry .1.3.6.1.4.1.4515.1.3.14.1.1 |
slPortConfigEntryAn entry in the table correspond to a port of the node. SlPortConfigEntry .1.3.6.1.4.1.4515.1.3.14.1.1.1 |
slPortConfigIndexThe Slot Index of the LED. The Slot number for
the Shelf led is 0.ro INTEGER .1.3.6.1.4.1.4515.1.3.14.1.1.1.1 |
slPortConfigLedColorThe LED color of the port.ro LedColor .1.3.6.1.4.1.4515.1.3.14.1.1.1.2 |
slPortConfigLedModeThe LED mode of the port.ro LedMode .1.3.6.1.4.1.4515.1.3.14.1.1.1.3 |
slPortConfigChangeTypeThis object is used to change the type of the port.
The type value is one of the IANA types.
Changing port type should remove all the information related to this port.
Such as, ifTable entry, PM info, GFP and VCG entries, current alarms, ...rw INTEGER .1.3.6.1.4.1.4515.1.3.14.1.1.1.4 |
slPortConfigAlarmMaskThis object is used to mask the alarms of the port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.14.1.1.1.5 |
slPortConfigLabelThis object is the shadow of ifAlias. When the ifAlias
of the primary interface of this port is changed,
the value of this object should be changed to the same value.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.14.1.1.1.6 |
slPortConfigLastChangeThe value of sysUpTime at last time a slPortConfigTable table
was changed.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4515.1.3.14.1.2 |
slPortNotification OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.14.2 |
slPortConfigChangedAn slPortConfigChanged notification is sent
when the state of one of the port is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.14.2.1 |
slPortConfigChangedTypeAn slPortConfigChangedType notification is sent
when the type of one of a port is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.14.2.2 |
slPortConfigChangedMaskAn slPortConfigChangedMask notification is sent
when the mask of one of the port is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.14.2.3 |
slPortConfigChangedLabelAn slPortConfigChangedLabel notification is sent when the
corresponding object slPortConfigLabel is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.14.2.4 |
slPortConfigChangedApsEnabledAn slPortConfigChangedLabel notification is sent when the
corresponding object slPortConfigApsEnable is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.14.2.5 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.