SL-OPT-MIB
This MIB module describes the optical connections.
Main OID:
slOpt.1.3.6.1.4.1.4515.1.11
21
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
slOptThis MIB module describes the optical connections. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.11 |
slOptConn OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.11.1 |
optXpdConnConfigTableThe dynamic Transponding table. The table contains for each
transponding connection two entries, one for each direction.
The index to the table is the ifIndex of both interfaces
because in the case of one of the APS configuration we define
a one-to-many connection.
The ifType valued used for the index is: 196. SEQUENCE OF OptXpdConnConfigEntry .1.3.6.1.4.1.4515.1.11.1.1 |
optXpdConnConfigEntryAn entry in the Transponding table. OptXpdConnConfigEntry .1.3.6.1.4.1.4515.1.11.1.1.1 |
optXpdConnConfigIngressIfThe ingress transponding interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.11.1.1.1.1 |
optXpdConnConfigEgressIfThe egress transponding interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.11.1.1.1.2 |
optXpdConnConfigRateControlAdminThis variable ask the rate of the traffic used
by this interface. The value should be specified in Kbps
units.
The value of the optXpdConnConfigRateControlAdmin variable
should contain two information elements:
1. The retimer bit-rate.
2. The source of the rate (enum or explicit).
The second information element shall be taken from the right-most
bit of the object value. While the bit-rate will be represented by the
rest of the bits.
For example if the user configured an explicit bit rate R,
the value of the object will be 2xR.
If the user configured the same value by ENUM selection,
the object value shall be 2xR + 1.
This means that the MCC should send the service card the object
value shifted >> 1 (devide by 2).
The value 0 is used for rate control Bypass.rw INTEGER .1.3.6.1.4.1.4515.1.11.1.1.1.3 |
optXpdConnConfigRateControlOperThis variable tells the rate of the traffic used
by this interface.
The value should be specified in Kbps.
The value is translate by the agent to the rate supported
by the hardware device units.
The value 0 is returned for rate control Bypass.ro INTEGER .1.3.6.1.4.1.4515.1.11.1.1.1.4 |
optXpdConnConfigRowStatusThis object is used to create and delete rows in
the table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4515.1.11.1.1.1.5 |
optXpdConnConfigLosPropagationThis object is used to detrmine if the LOS propagation should be active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.11.1.1.1.6 |
optXpdConnSonetRateIn the case of implicit SONET rate, this variable should be TRUE.
If the case of explicit SONET rate, the user may select TRUE or FALSE.
In this case the default value is FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.11.1.1.1.7 |
optXpd10ConnConfigTableThe static 10Gb Transponding table. The table contains for each
transponding connection two entries, one for each direction.
The index to the table is the ifIndex the upper interface (port# 1).
The ifType valued used for the index is: 196. SEQUENCE OF OptXpd10ConnConfigEntry .1.3.6.1.4.1.4515.1.11.1.2 |
optXpd10ConnConfigEntryAn entry in the 10Gb Transponding table. OptXpd10ConnConfigEntry .1.3.6.1.4.1.4515.1.11.1.2.1 |
optXpd10ConnConfigIngressIfThe ingress transponding interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.11.1.2.1.1 |
optXpd10ConnConfigEgressIfThe egress transponding interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.11.1.2.1.2 |
optXpd10ConnConfigRateControlOperThis variable tells the rate of the traffic used
by this interface.
The value should be specified in Kbps.
The value is translate by the agent to the rate supported
by the hardware device units.ro INTEGER .1.3.6.1.4.1.4515.1.11.1.2.1.3 |
optXpd10ConnConfigLosPropagationThis object is used to detrmine if the LOS propagation should be active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.11.1.2.1.4 |
slOptLastChange OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.11.6 |
optXpdConnConfigLastChangeThe value of MIB II's sysUpTime object at the
time the optXpdConnConfigTable was last changed.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4515.1.11.6.1 |
slOptTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.11.7 |
optXpdConnConfigTableChangeA optXpdConnConfigTableChange trap is sent when the
content of the xpdConnConfigTable is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.11.7.1 |
More MIBs from Argon
Browse all ArgonMIBs →SL-FC-MIB
SNMP MIB module
203 objects→
SL-SONET-SUP-PM-MIB
SNMP MIB module
195 objects→
SL-SFP-MIB
SNMP MIB module
159 objects→
SL-MAIN-MIB
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
125 objects→
SL-ESCON-MIB
SNMP MIB module
106 objects→
SL-ETH-MIB
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.
98 objects→