SL-DCM-MIB
Imported Objects
Objects
11 total| Object Name |
|---|
slDcmThis MIB module describes the DCM modules MODULE-IDENTITY .1.3.6.1.4.1.4515.1.14 |
dcmTableThe DCM table. SEQUENCE OF DcmEntry .1.3.6.1.4.1.4515.1.14.1 |
dcmEntryAn entry in the DCM table. DcmEntry .1.3.6.1.4.1.4515.1.14.1.1 |
dcmIndexThe interface index of the DCM (Type=195; Port=216).ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.14.1.1.1 |
dcmRangeThe range in dispersion units (ps/nm).
The object is given by the user in km units and the value is translated to dispersion units and wrotten to the DCM.rw INTEGER .1.3.6.1.4.1.4515.1.14.1.1.2 |
dcmSpacingThe spacing between two adjacent optical channels in GHz units.ro INTEGER .1.3.6.1.4.1.4515.1.14.1.1.3 |
dcmTemperatureThis object is applicable only for active DCM modules.
The temperature is encoded as a signed two's complement value in C,
yielding a total range of -128C to +127Cro INTEGER .1.3.6.1.4.1.4515.1.14.1.1.4 |
dcmIsActiveIndicate if the DCM module is active.
The value true if the value of the DCM range in the SEEP is 1.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.14.1.1.5 |
dcmFiberCoefficientThe fiber chromatic dispersion coefficient.
For example the chromatic dispersion coefficient value for G.652 fiber is 17 ps/(nm km).
For G.655 is 6 ps/(nm km)
For G.656 is 14 ps/(nm km)
The default value is 17.rw INTEGER .1.3.6.1.4.1.4515.1.14.1.1.6 |
dcmMinDispersionThe minimal dispersion supported by the DCM module.
Example -1350 ps/nmro INTEGER .1.3.6.1.4.1.4515.1.14.1.1.7 |
dcmMaxDispersionThe maximal dispersion supported by the DCM module.
Example -350 ps/nmro INTEGER .1.3.6.1.4.1.4515.1.14.1.1.8 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.