SL-ALS-MIB
The SL-ALS-MIB module enables SNMP-based monitoring of SiteLight Automatic Light Source (ALS) status, laser safety states, and optical power thresholds on compatible SiteLight optical transport devices. It provides critical visibility into laser emission safety interlocks and optical signal integrity to ensure compliance with laser safety regulations and prevent equipment damage.
Imported Objects
Objects
15 total| Object Name |
|---|
slAlsMibThis MIB module describes the SiteLight ALS feature. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.12 |
slAlsConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.12.1 |
slAlsConfigTableThe ALS configuration Table. SEQUENCE OF SlAlsConfigEntry .1.3.6.1.4.1.4515.1.12.1.1 |
slAlsConfigEntryThe entries exist for active optical inetfaces
ifType = 196. The objects in this table are
used to configure the ALS algorithm. SlAlsConfigEntry .1.3.6.1.4.1.4515.1.12.1.1.1 |
slAlsModeEnable/Disable the ALS algorithm.
When the Laser Admin Status is 'down' the ALS not operational.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.1 |
slAlsLosDeclareTimeTime to declare optical LOS present or clear: 550 +- 50 msec.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.2 |
slAlsTestPulseTimeManual restart for test Pulse time (in manual restart) - 90+-10 sec.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.3 |
slAlsManualPulseTimeManual restart Pulse time (in manual mode):
(1),
(2),
(3),
(i > 3)
::= { slAlsConfigEntry 4 }
slAlsAutomaticPulseTime OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-write
STATUS current
DESCRIPTIONrw INTEGER .1.3.6.1.4.1.4515.1.12.1.1.1.5 |
slAlsAutomaticDelayTimeIn Automatic mode. The delay between two laser re-activations.rw INTEGER .1.3.6.1.4.1.4515.1.12.1.1.1.6 |
slAlsLaserTestActivateActivate the laser for test operation.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.7 |
slAlsLaserManualActivateActivate the laser manual operation.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.8 |
slAlsOperStatusThe operational status of the ALS algorithm.
When the Laser Admin Status is 'down' the ALS not operational.ro Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.9 |
slAlsResetParamsSetting this variable to 1 will reset the ALS
parameters to the factory defaults.rw Enumeration .1.3.6.1.4.1.4515.1.12.1.1.1.10 |
slAlsTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.12.2 |
slAlsStatusChangeTrapA slAlsStatusChangeTrap is sent when the TX laser status is changed. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.12.2.1 |
More MIBs from Argon
Browse all ArgonMIBs →SNMP MIB module
SNMP MIB module
SNMP MIB module
The SL-MAIN-MIB module provides SNMP access to monitor and manage the operational status, hardware health, and system resources of the main board on Schneider Electric (formerly Telemecanique) industrial automation controllers. It exposes critical metrics including CPU utilization, memory usage, temperature sensors, and power supply states to facilitate real-time fault detection and preventive maintenance.
SNMP MIB module
The SL-ETH-MIB module enables monitoring of Ethernet service parameters, specifically tracking interface statistics, service instance states, and traffic counters for SLA-compliant Ethernet services on Silex (or compatible) network equipment. It facilitates the verification of service connectivity and performance metrics required for SLA enforcement and fault isolation in carrier-grade Ethernet deployments.