SL-ALARM-MIB
AI MIB Summary
The SL-ALARM-MIB module defines the structure for retrieving and managing hardware and software alarm states, including severity levels and timestamps, on SanDisk (now Western Digital) storage systems and network-attached storage appliances. It enables network management systems to monitor critical device conditions such as disk failures, controller faults, and environmental thresholds to trigger immediate alerting or automated remediation workflows.
This MIB module describes the ALARMS.
Main OID:
slAlarmMib.1.3.6.1.4.1.4515.1.3.20
17
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
slAlarmMibThis MIB module describes the ALARMS. MODULE-IDENTITY .1.3.6.1.4.1.4515.1.3.20 |
slAlarmConfig OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.20.1 |
slAlarmConfigTableThis table contains objects to configure the SL Alarms. SEQUENCE OF SlAlarmConfigEntry .1.3.6.1.4.1.4515.1.3.20.1.1 |
slAlarmConfigEntryAn entry exist for each type of alarm.
The entry describes the alarm properties. SlAlarmConfigEntry .1.3.6.1.4.1.4515.1.3.20.1.1.1 |
slAlarmIfIndexThe corresponding interface index.
The interface type may be one of:
- Sonet Line,
- Sonet Path,
- CLU
- NE.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.4515.1.3.20.1.1.1.1 |
slAlarmTypeThe alarm type.ro SlAlarmType .1.3.6.1.4.1.4515.1.3.20.1.1.1.2 |
slAlarmSeverityThe alarm severity.ro Enumeration .1.3.6.1.4.1.4515.1.3.20.1.1.1.3 |
slAlarmServiceAffectThe alarm service affecting Yes/No.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.1.1.1.4 |
slAlarmTimeStampThe calendar time of the alarm.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.1.1.1.5 |
slAlarmAcknowledgedAllow the NMS to acknowledge an active alarm.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.1.1.1.6 |
slAlarmAckUserThe name of the user that performed the Ack.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.1.1.1.7 |
slAlarmTextThe alarm text.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.1.1.1.8 |
slAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.20.2 |
slAlarmTraps0 OBJECT IDENTIFIER .1.3.6.1.4.1.4515.1.3.20.2.0 |
slAlarmTrap0An slAlarmTrap0 notification is sent when an alarm occures.
It is defined to support browsers that don't recognize RFC 2576. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.20.2.0.2 |
slAlarmActiveThe alarm is active Yes/No.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.4515.1.3.20.2.1 |
slAlarmTrapAn slAlarmTrap notification is sent when an alarm occures. NOTIFICATION-TYPE .1.3.6.1.4.1.4515.1.3.20.2.2 |