SIEMENS-DUPLEXWRITE-MIB
Detailed view of the defined objects, syntax rules, and hierarchical paths.
77
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
sni OBJECT IDENTIFIER .1.3.6.1.4.1.231 |
IMPORTS Unknown .1.3.6.1.4.1.231 |
sniProductMibs OBJECT IDENTIFIER .1.3.6.1.4.1.231.2 |
sniExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10 |
sniServerMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2 |
sieDWNewConfigTrap occurs after the driver has created a new DuplexWrite group or has added a device to an existing DuplexWrite group as requested by the configuration utility. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1300 |
sieDWPieceRemovedTrap occurs after the driver has removed a device from a DuplexWrite group. The action was requested by the configuration utility. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1301 |
sieDWConfigRemovedTrap occurs after the driver has removed a DuplexWrite group. The action was requested by the configuration utility. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1302 |
sieDWStatusSetTrap occurs after the driver has set the status of a DuplexWrite group. The action was requested by the configuration utility. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1303 |
sieDWUpdateStatusTrap occurs after the driver has updated the status of a DuplexWrite group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1304 |
sieDWPieceRecoveredTrap occurs after the driver has sucessfully recovered a DuplexWrite group as requested by the configuration utility. Both pieces are ONLINE. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1305 |
sieDWRecoverAbortedTrap occurs after the driver has aborted the recovery process of a DuplexWrite group as requested by the configuration utility. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1306 |
sieDWReservationConflictTrap occurs after the driver has detected a reservation conflict. A whole DuplexWrite group is not accessible from now on. This is only an error if it happens during operation (not initialization) of this group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1307 |
sieDWConfigChangedTrap occurs after the driver has done a rescan/reread and found a new configuration. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1308 |
sieDWConfigInvalidatedTrap occurs after the driver has invalidated the configuration information for a device as requested by the DuplexWrite cluster service. The configuration information is reread before the next access of the device on this cluster element. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1309 |
sieDWActiveLunChangedTrap occurs after the driver has changed the path for read commands to a specified device of a DuplexWrite group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1310 |
sieDWPieceFailedTrap occurs after the driver has detected an error on one of the devices of a DuplexWrite group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1311 |
sieDWRootFlagChangedTrap occurs after the driver has changed the root behavior of a DuplexWrite group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1312 |
sieDWNameChangedTrap occurs after the driver has changed the name of a DuplexWrite group. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1313 |
sieDWForceActiveTrap occurs after the driver has marked a disk of a DuplexWrite group forced active at next boot. The partner disk can be used for a snapshot. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1314 |
sieDWRefreshFinishedTrap occurs after the driver interface has updated the internal data structures. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1350 |
sieDWDiskRegisteredTrap occurs after the driver interface has modified the registry so that after the next reboot a disk is registered/unregistered. TRAP-TYPE .1.3.6.1.4.1.231.2.10.2.0.1351 |
sniCommon OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2 |
sieDuplexWrite OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.8 |
sieDWAgentInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.8.1 |
sieDWAgentIdDuplexWrite SNMP agent ID stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.1.1 |
sieDWAgentCompanyDuplexWrite SNMP agent company stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.1.2 |
sieDWAgentVersionDuplexWrite SNMP agent version stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.1.3 |
sieDWAgentBuildDuplexWrite SNMP agent build date and time stringro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.1.4 |
sieDWStatus OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.8.2 |
sieDWLastDateDate of last recent reconfiguration in time_t (seconds since 1/1/1970 00:00:00)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.2.1 |
sieDWCurrentStatusThis reflects the overall status of the driver, agent and the underlying ports.
Possible values are:
OK everything is fine
DEGRADED there was an event from the driver marking a change of DuplexWrite configuration or port status
ERROR software exception (software bug)
FAILED communication with driver fails (bug, driver not installed)ro Enumeration .1.3.6.1.4.1.231.2.10.2.2.8.2.2 |
sieDWRefreshCommand to refresh the data the agent is maintainingrw Enumeration .1.3.6.1.4.1.231.2.10.2.2.8.2.3 |
sieDWClusterPartnerIf node is in a cluster this is the partner nodero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.2.4 |
sieDWContainer OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.8.3 |
sieDWDeviceTableTable of all devices DuplexWrite can detect SEQUENCE OF SieDWDevice .1.3.6.1.4.1.231.2.10.2.2.8.3.1 |
sieDWDeviceEntry in table of DuplexWrite devices SieDWDevice .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1 |
sieDWDeviceIDA unique value for each device, starts at 0 and
remains unchanged from one re-initialization of
the agent to the nextro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.1 |
sieDWDevicePortThe SCSI port number where this device is attachedro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.2 |
sieDWActiveDevicePortThe SCSI port number where this device is attached, when MultiPath
is installed this is the active portro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.3 |
sieDWPassiveDevicePort1When MultiPath is installed this is the SCSI port number of the first
passive port where this device is attachedro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.4 |
sieDWPassiveDevicePort2When MultiPath is installed this is the SCSI port number of the second
passive port where this device is attachedro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.5 |
sieDWPassiveDevicePort3When MultiPath is installed this is the SCSI port number of the third
passive port where this device is attachedro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.6 |
sieDWDevicePathThe SCSI path number (should be bus number) where this
device is attachedro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.7 |
sieDWDeviceTargetThe SCSI target ID of this devicero INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.8 |
sieDWDeviceLunThe SCSI lun of this devicero INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.9 |
sieDWDeviceDiskThe operating system's internal number for this device; e.g.
NT: disk 2ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.10 |
sieDWDeviceSizeloSize of the device in blocks (low part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.11 |
sieDWDeviceSizehiSize of the device in blocks (high part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.12 |
sieDWDeviceSizeMBloSize of the device in MB (low part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.13 |
sieDWDeviceSizeMBhiSize of the device in MB (high part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.14 |
sieDWDeviceInquiryStringThe SCSI inquiry string of this devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.15 |
sieDWDeviceDriverNameThe name of the operating system's driver that handles
the devicero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.16 |
sieDWDuplexStatusThe status of the DW group where this device is part of:
online: the device is in perfect order (GET/SET)
error: the device had a fault (GET/SET)
recover: the device is working on a catch-up (GET)
disable: stop operation of this device (GET/SET)
simplex: simple SCSI device (GET)
na: not available as DuplexDisk piece (GET)
preferred: piece used for read (GET)
multipath: disk not accessible (MultiPath) (GET)
cluster: disk on other cluster node (GET)
missing: one disk of the DW group is missing (GET)
The highest 8 bit of the value are used for additional
status information:
Bit field: Bit 0 - most recent
Bit 1 - root
Bit 2 - force active
Bit 3 - hotspare
Bit 4 - broken
Bit 5 - reserved
...
Bit 7 - reservedrw Enumeration .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.17 |
sieDWDuplexReasonThe reason for an error of the DW group where this device
is part ofro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.18 |
sieDWDuplexNumberThe DW internal number of the DW group where this device
is part ofro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.19 |
sieDWDuplexPieceThe internal number this device has inside its DW groupro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.20 |
sieDWDuplexSizeloThe size of the DW group in blocks where this device is part of (low part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.21 |
sieDWDuplexSizehiThe size of the DW group in blocks where this device is part of (high part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.22 |
sieDWDuplexSizeMBloThe size of the DW group in MB where this device is part of (low part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.23 |
sieDWDuplexSizeMBhiThe size of the DW group in MB where this device is part of (high part)ro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.24 |
sieDWDuplexRecoverProgressThe progress in percent of a recovery of the DW group where
this device is part ofro INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.25 |
sieDWDuplexCreateCommand to create a DW group with this devicerw INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.26 |
sieDWDuplexAddCommand to add device <diskNumber> to the DW group with this devicerw INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.27 |
sieDWDuplexCopyCommand to recover (catchup) device <diskNumber> inside its DW grouprw INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.28 |
sieDWDuplexDeleteCommand to delete this device from its DW group - if it's the last device
of its group the group is destroyedrw INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.29 |
sieDWDuplexBehaviorCommand to include/exclude this device from being used by DW;
Command to set this device as preferred device in this DW for readingrw Enumeration .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.30 |
sieDWDuplexNameThe DW internal name of the DW group where this device
is part ofrw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.3.1.1.31 |
sieDWTrapInfo OBJECT IDENTIFIER .1.3.6.1.4.1.231.2.10.2.2.8.10 |
sieDWTrapServerNameName of the server where the trap occured DisplayString (SNMPv2-TC) .1.3.6.1.4.1.231.2.10.2.2.8.10.1 |
sieDWTrapTimeTime the trap occured (in seconds since 1/1/1970 00:00:00) INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.2 |
sieDWTrapGroupIDThe DuplexWrite Group ID where the change occured INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.3 |
sieDWTrapPortIDThe DuplexWrite Port ID where the change occured INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.4 |
sieDWTrapPathIDThe DuplexWrite Path ID where the change occured INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.5 |
sieDWTrapTargetIDThe DuplexWrite Target ID where the change occured INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.6 |
sieDWTrapLunIDThe DuplexWrite Lun ID where the change occured INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.7 |
sieDWTrapErrorThe DuplexWrite error code for certain traps INTEGER .1.3.6.1.4.1.231.2.10.2.2.8.10.8 |
More MIBs from Sni
Browse all SniMIBs →SHE-BRIDGE-MIB
SNMP MIB module
1862 objects→
FSC-RAID-MIB
Standard SNMP MIB module defining data structures for FSC-RAID-MIB.
1229 objects→
XLDV20-MIB
SNMP MIB module
894 objects→
SHE-ADSL-MIB
The SHE-ADSL-MIB extends the standard ADSL-LINE-MIB to monitor proprietary ADSL line, physical layer, and channel performance metrics, including signal attenuation, noise margins, error counts, and configuration profiles for ATUC and ATUR interfaces. It facilitates granular management of ADSL line configurations, alarm thresholds, and traffic profiles via specific tables for physical parameters, performance data intervals, and virtual circuit types.
870 objects→
SHE-XDSL-MIB
SNMP MIB module
841 objects→
FSC-HPI-MIB
Standard SNMP MIB module defining data structures for FSC-HPI-MIB.
606 objects→