SHE-SELT-MIB
Definition of selt feature control command
Main OID:
sheSelt.1.3.6.1.4.1.231.7.1.2.2.1.23
43
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
43 total| Object Name |
|---|
sheSeltDefinition of selt feature control command MODULE-IDENTITY .1.3.6.1.4.1.231.7.1.2.2.1.23 |
sheSeltServerObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.1 |
sheSeltServerObjectsConnectStateIndicates the connection state between CXU and SELT server.ro SheSeltServerInfoConnectStateType .1.3.6.1.4.1.231.7.1.2.2.1.23.1.1 |
sheSeltServerObjectsServerIPIndicates IP address of SELT server.ro IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.23.1.2 |
sheSeltServerObjectsServicePortIndicates SELT service port of SELT server.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.23.1.3 |
sheSeltServerControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.2 |
sheSeltServerControlReqControl connection between CXU and SELT server(config SELT server IP address and service port, connect CXU to SELT server and disconnect CXU with SELT server.SELT server is used to receive and collect selt raw data from plugin unit IU throuth CXU, to calculate and then to send selt result to CXU, so before doing selt test,SELT server must be configed and connected.A config command is permanent unless we need to change SELT sever's IP address or service port.A connect command supports all IU's selt test unless the connection is close for some reasons.rw SheSeltServerControlReqType .1.3.6.1.4.1.231.7.1.2.2.1.23.2.1 |
sheSeltServerControlServerIPSELT server's IP address.rw IpAddress .1.3.6.1.4.1.231.7.1.2.2.1.23.2.2 |
sheSeltServerControlServicePortSELT service port number.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.23.2.3 |
sheSeltServerControlStatusThe status of a control request.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.23.2.4 |
sheSeltServerControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.23.2.5 |
sheSeltServerControlReqResultThe result of the last user command.ro SheSeltServerControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.23.2.6 |
sheSeltServerControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.23.2.7 |
sheSeltTestRequestObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.3 |
sheSeltTestRequestIfStateTableEach entry in this table contains the testing status of each IfIndex and its related IuIndex. SEQUENCE OF SheSeltTestRequestIfStateEntry .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1 |
sheSeltTestRequestIfStateEntryAn entry in sheSeltStatusIfTable. SheSeltTestRequestIfStateEntry .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1 |
sheSeltTestRequestIfIndexIfIndex: the Index of port(such as: 101, 102...172; 201, 202...272; ...)ro InterfaceIndex .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1.1 |
sheSeltTestRequestIfStateThe selt test status of port (IfIndex). If current port is under selt test, its sheSeltTestRequestIfState = sheSeltStatusIfBeingTested, otherwise its sheSeltTestRequestIfState = sheSeltStatusIfBeingIdle.ro SheSeltTestRequestIfStateType .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1.2 |
sheSeltTestRequestIuStateThe selt test status of IU of this port. Every port must know whether this IU is under selt test or not, in order to decide if the selt test request on this port can be accepted. If any port of its IU is under selt test, sheSeltTestRequestIuState = sheSeltStatusIuBeingTested; If all ports are not under selt test, sheSeltTestRequestIuState = sheSeltStatusIuBeingIdle For example: If port 101 is under selt test, sheSeltTestRequestIuState of 101 and 102 are both sheSeltStatusIuBeingTested.ro SheSeltTestRequestIuStateType .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1.3 |
sheSeltTestRequestIfFDRCollectionEnableStateThe value of FDRCollectionEnable for this port, if it is under selt test. If this port is not under selt test, return FDRCollectionDisable(0).ro SheSeltTestRequestControlReqFDRCollectionEnableType .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1.4 |
sheSeltTestRequestIfFDRCollectionNumAverageStateThe value of FDRCollectionNumAverage for this port, if it is under selt test. If this port is not under selt test, return 0.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.23.3.1.1.5 |
sheSeltTestRequestControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.4 |
sheSeltTestRequestControlReqControls CXU to send doing selt test to IU for a specified subscriber's loop.Note that simultaneous tests of subscriber's loop on different IUs are allowed, but simultaneous tests of different subscribers' loops on the same IU are not allowed. When IU received the command it'll begin to process and send raw data to CXU,then to SELT server.rw SheSeltTestRequestControlReqType .1.3.6.1.4.1.231.7.1.2.2.1.23.4.1 |
sheSeltTestRequestControlReqIfIndexThe interface index of the ADSL central PPTP for which selt shall be activated.rw InterfaceIndex .1.3.6.1.4.1.231.7.1.2.2.1.23.4.2 |
sheSeltTestRequestControlReqComdIdCommand ID of one single end loop test.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.23.4.3 |
sheSeltTestRequestControlStatusThe status of a control request.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.23.4.4 |
sheSeltTestRequestControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.23.4.5 |
sheSeltTestRequestControlReqResultThe result of the last user command.ro SheSeltTestRequestControlReqResultType .1.3.6.1.4.1.231.7.1.2.2.1.23.4.6 |
sheSeltTestRequestControlReqTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.23.4.7 |
sheSeltTestRequestControlReqFDRCollectionEnableThis parameter is specific for Infineon line card, but not for Conexant line card. This parameter is to enable/disable FDR Data Collection. Two kinds of value can be selected as following: I. Disable (0) II. Enable (1)rw SheSeltTestRequestControlReqFDRCollectionEnableType .1.3.6.1.4.1.231.7.1.2.2.1.23.4.8 |
sheSeltTestRequestControlReqFDRCollectionNumAverageThis parameter is specific for Infineon line card, but not for Conexant line card. This parameter is to set the number of average for FDR Data Collection when sheSeltTestRequestControlReqFDRCollectionEnable is Enable(1). When sheSeltTestRequestControlReqFDRCollectionEnable is Disable(0), this one will be igored. The range of this one is [1, 65535], and the default value is 1024. With this default number of averages, a single data collection will take approximately 90 seconds.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.23.4.9 |
sheSeltNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.5 |
sheSeltServerControlResultEventSucceeded or failed to connect with SELT server. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.23.5.1 |
sheSeltTestRequestControlResultEventSucceeded or failed to execute the command of selt request. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.23.5.2 |
sheSeltReceivedRawDataEventHaving received raw data from IU. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.23.5.3 |
sheSeltNoReceivedRawDataEventHaving not received raw data from IU. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.23.5.4 |
sheSeltConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.100 |
sheSeltGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.100.1 |
sheSeltGroupA collection of objects providing information about a VDSL Line. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.23.100.1.1 |
sheSeltControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.23.100.1.2 |
sheSeltNotificationGroupThis group supports notifications of significant conditions associated with physical objects. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.23.100.1.3 |
sheSeltCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.23.100.2 |
sheSeltMibComplianceDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.23.100.2.1 |