SHE-PTP-MIB
This MIB based on ptp-Mib proposal from IEEE1588 workin group. Management Information Base module for PTP configuration, default dataset, current dataset, parent dataset, global time proporties dataset, foreign dataset and port configuration dataset components. New supported with R3.7M.
Main OID:
shePtpMIB.1.3.6.1.4.1.231.7.1.2.2.1.22
148
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
148 total| Object Name |
|---|
shePtpMIBThis MIB based on ptp-Mib proposal from IEEE1588 workin group. Management Information Base module for PTP configuration, default dataset, current dataset, parent dataset, global time proporties dataset, foreign dataset and port configuration dataset components. New supported with R3.7M. MODULE-IDENTITY .1.3.6.1.4.1.231.7.1.2.2.1.22 |
shePtpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1 |
shePtpBase OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1 |
shePtpAdminStateEnable or disable the Precision Time Protocol on this node. The default value is disabled. Note: SHE system will enable/disable the PTP subsystem via a configuration command in sheSyncMib. This will force an switchover between the system default sync module, which could use T3 or BITS or syncEthernet as sync sources configured and controled via sheSyncMib, and the PTP sync module configured and controled via this shePtpMib module. A modification will only be supported if CXU_B3 is used! All other CXU versions are not able to support timing over packet feature!ro ShePtpEnableType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1.1 |
shePtpManufacturerIdentityThe value of manufacturerIdentity shall be an OUI owned by the manufacturer of the node.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1.2 |
shePtpRevisionDataIndication of the revisions for node hardware (HW), firmware (FW), and software (SW). This information shall be semicolon (;) separated (HW;FW;SW).ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1.3 |
shePtpClockTypeClockType as defined in the CLOCK_DESCRIPTION management message. Indication of the PTP node type. A TRUE value of a bit in the clockType field indicates that the description applies to the node. 0 - ordinary clock 1 - boundary clock 2 - peer-to-peer transparent clock 3 - end-to-end transparent clock 4 - management node 5..0xF - Reservedro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1.4 |
shePtpVersionVersion number of supported IEEE1588 release.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.1.5 |
shePtpDefaultDataSet OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2 |
shePtpDefaultDSInitializableThe clock can be reinitialized by a management message.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.1 |
shePtpDefaultDSTwoStepFlagUse Follow Up messages or not. Using Follow Up will increase PTP packet rate (2x Sync rate) and CPU load!ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.2 |
shePtpDefaultDSIdentityThe clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.3 |
shePtpDefaultDSNumberPortsNumber of available PTP port's in the system.ro Unsigned32 (1) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.4 |
shePtpDefaultDSClassclockClass attribute of this ordinary slave-only clock. Default value is 255.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.5 |
shePtpDefaultDSAccuracyPart of default dataset clockQuality struct. Characterizes a clock for the purpose of the best master clock (BMC) algorithm. This is an enum value as defined in clause 7.6.2.5, table 6 of IEEE1588-2008 standard. clockAccuracy is related to the time source and holdover specifications of this clockro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.6 |
shePtpDefaultDSVarianceoffsetScaledLogVariance defaultDS member, it is an attribute defining the stability of a clock. This is the precision of the timestamps included in messages issued by the clock when it is not synchronized to another clock using the protocol. The representation is described in clause 7.6.3.3 of IEEE1588-2008 standard.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.7 |
shePtpDefaultDSPriority1priority1 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority1 is meaningless in respect of BMC.ro INTEGER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.8 |
shePtpDefaultDSPriority2priority2 attribute of this PTP clock. This attribute is used in the execution of the best master clock algorithm, if BMC is used. However in this PTP slave clock implementation SLAVE_ONLY mode is used and priority2 is meaningless in respect of BMC.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.9 |
shePtpDefaultDSDomainNumberA domain number specifying the scope of PTP message communication, state, operations, data sets and timescale. 0 - default 1 - alternate domain 1 2 - alternate domain 2 3 - alternate domain 3 4..127 - user-defined 128..255 - reservedro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.10 |
shePtpDefaultDSSlaveOnlySet to TRUE during initialization and not allowed to be changed as this is a slave-only clock.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.2.11 |
shePtpDefaultDataSetControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3 |
shePtpDefaultDSControlRequestsetPtpDefaultDataSet (10): shePtpDefaultDSControlInitializable shePtpDefaultDSControlTwoStepFlag shePtpDefaultDSControlIdentity shePtpDefaultDSControlPriority1 shePtpDefaultDSControlPriority2 shePtpDefaultDSControlDomainNumberrw ShePtpControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.1 |
shePtpDefaultDSControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.2 |
shePtpDefaultDSControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.3 |
shePtpDefaultDSControlReqResultThe result of the last user command.ro ShePtpControlRequestResultType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.4 |
shePtpDefaultDSControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.5 |
shePtpDefaultDSControlInitializablelook at group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.6 |
shePtpDefaultDSControlTwoStepFlaglook at group.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.7 |
shePtpDefaultDSControlIdentitylook at group.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.8 |
shePtpDefaultDSControlPriority1look at group.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.9 |
shePtpDefaultDSControlPriority2look at group.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.10 |
shePtpDefaultDSControlDomainNumberlook at group. Range 128...255 is reserved.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.3.11 |
shePtpCurrentDataSet OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4 |
shePtpCurrentDataSetStepsRemovedThe number of communication paths traversed between the local clock and the grandmaster clock.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4.1 |
shePtpCurrentDataSetOffsettFromMasterSecondsImplementation-specific current value of the time difference between a master and a slave as computed by the slave in seconds.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4.2 |
shePtpCurrentDataSetOffsettFromMasterNanoSecondsImplementation-specific current value of the time difference between a master and a slave as computed by the slave in nano-seconds.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4.3 |
shePtpCurrentDataSetMeanPathDelaySecondsImplementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in seconds.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4.4 |
shePtpCurrentDataSetMeanPathDelayNanoSecondsImplementation-specific current value of the mean propagation time between a master and slave clock as computed by the slave in nano-seconds.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.4.5 |
shePtpParentDataSet OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5 |
shePtpParentClockIdentityIdentifies parent clock this slave clock is synchronized to. The clockIdentity is an 8 octet (byte) array. The value range of each octet is 0..0xFF.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.1 |
shePtpParentClockPortNumberPort number of master clock to which this clock synchronizes.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.2 |
shePtpParentGrandmasterIdentityClockIdentity attribute of the grandmaster clock.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.3 |
shePtpParentGrandmasterClockClassPart of grandmaster clock quality struct.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.4 |
shePtpParentGrandmasterClockAccuracyPart of grandmaster clock quality struct.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.5 |
shePtpParentGrandmasterClockVariancePart of grandmaster clock quality struct.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.6 |
shePtpParentGrandmasterPriority1Priority1 attribute of the grandmaster clock.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.7 |
shePtpParentGrandmasterPriority2Priority2 attribute of the grandmaster clock.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.5.8 |
shePtpPortDataSetTableThe table containing Port Data Set entries for each port of this clock. For the single port of this clock, ShePtpPortDataSetEntry is maintained as the basis for protocol decisions and providing values for message fields. The number of the table entries is the value of shePtpDefaultDSNumberPorts. SEQUENCE OF ShePtpPortDataSetEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6 |
shePtpPortDataSetEntryPTP configuration information for a particular port. ShePtpPortDataSetEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1 |
shePtpPortDSPortNumberThe value of the portNumber for a port on a PTP node supporting a single PTP port shall be 1. The values of the port numbers for the N ports on a PTP node supporting N PTP ports shall be 1, 2, ..N, respectivelyro Integer32 (1) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.1 |
shePtpPortDSClockIdentityPortIdentity attribute of the local port.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.2 |
shePtpPortDSDelayMechanismIndication of the propagation delay measuring option used by the port in computing shePtpCurrentDataSetMeanPathDelay*. Possible values: E2E (0x01) - The port is configured to use the delay request-response mechanism; P2P (0x02) - The port is configured to use the peer delay mechanism; DISABLED (0xFE) - The port does not implement the delay mechanism.ro ShePtpPortDSDelayMechanismType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.3 |
shePtpPortDSAcceptableMasterEnabledEnable/Disable the usage of acceptableMasterTable. The Acceptable Master Table is always used and this attribute value is always TRUE.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.4 |
shePtpPortDSUnicastNegotiationEnabledThis atrribute determines if the message negotiation is used (TRUE) or not (FALSE) in case unicast communications is used, for any master clock entered in the acceptableMasterTable. This is a global flag to enable/disable unicast negotiation. This flag must be set to true and an entry added to the acceptableMasterTable and the discoveryMasterTable for autonegotiation to be started with given master clock.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.5 |
shePtpPortDSUnicastNegotiationDurationThe duration in seconds for which to request unicast contracts. Only relevant for negotiated unicast streams, i.e. to the master clocks which port addresses are present in the shePtpUnicastDiscoveryMasterTable.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.6 |
shePtpPortDSUnicastLogQueryIntervalThe log to the base 2 value of the request rate (per second) when trying to establish a unicast contract with a remote master device (when it does not respond immediately).ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.7 |
shePtpPortDSVlanIdID of VLAN used for PTP traffic. This configuration is only a reference to used VLAN - no explicite Vlan create configuration in the NE will be forced by this setting. The interface configuration including IpAddress, SubnetMask and Vlan has to be made via general sheSystemIpHostTable configuration.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.8 |
shePtpPortDSLogMeanSyncIntervalThe interval to use for multicast sync messages on this port. This is log2(1/Sync packet rate) PTP version 2.ro ShePtpPortDSIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.9 |
shePtpPortDSLogMinMeanDelayReqIntervalIn PTP v2 for a slave device this is the preferred interval to be used for transmitting delay request messages but is subject to any minimum specified by the master. Logarithm to the base 2 of the minDelayReqInterval.ro ShePtpPortDSIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.10 |
shePtpPortDSLogMeanAnnounceIntervalThe interval to use for multicast announce messages on this port. This is log to the base 2 of the Announce message rate (per second).ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.11 |
shePtpPortDSAnnounceReceiptTimeoutThe timeout period, in announce message intervals, within which at least one announce message must be received.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.12 |
shePtpPortDSLogMinPdelayReqIntervalThe minimum permitted mean time interval between successive Pdelay_Req messages. By default this attribute is initialized to the value of shePtpPortDSLogMeanSyncInterval. This is log to the base 2 of the Pdelay_req message rate (per second).ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.13 |
shePtpPortDSAlarmSeverityIndexThis index selects an item in the sheAlarmSeverityProfileTable. It is used to assign the reported alarm to a severity.ro SheAlarmSevProfileIndex (SHE-ALARMING-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.6.1.14 |
shePtpPortDataSetControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7 |
shePtpPortDataSetControlRequestsetPtpPortConfigDataSet (11): shePtpPortDataSetControlIndex shePtpPortDataSetControlUnicastNegotiationEnabled shePtpPortDataSetControlUnicastNegotiationDuration shePtpPortDataSetControlUnicastLogQueryInterval shePtpPortDataSetControlVlanId shePtpPortDataSetControlLogMeanSyncInterval shePtpPortDataSetControlLogMinMeanDelayReqInterval shePtpPortDataSetControlLogMeanAnnounceInterval shePtpPortDataSetControlAnnounceReceiptTimeout shePtpPortDataSetControlLogMinPdelayReqInterval shePtpPortDataSetControlAlarmSeverityIndexrw ShePtpControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.1 |
shePtpPortDataSetControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.2 |
shePtpPortDataSetControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.3 |
shePtpPortDataSetControlControlReqResultThe result of the last user command.ro ShePtpControlRequestResultType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.4 |
shePtpPortDataSetControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.5 |
shePtpPortDataSetControlIndexThe index of port DS for configuration.rw Integer32 (1) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.6 |
shePtpPortDataSetControlUnicastNegotiationEnabledlook at table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.7 |
shePtpPortDataSetControlUnicastNegotiationDurationlook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.8 |
shePtpPortDataSetControlUnicastLogQueryIntervallook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.9 |
shePtpPortDataSetControlVlanIdlook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.10 |
shePtpPortDataSetControlLogMeanSyncIntervallook at table.rw ShePtpPortDSIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.11 |
shePtpPortDataSetControlLogMinMeanDelayReqIntervallook at table.rw ShePtpPortDSIntervalType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.12 |
shePtpPortDataSetControlLogMeanAnnounceIntervallook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.13 |
shePtpPortDataSetControlAnnounceReceiptTimeoutlook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.14 |
shePtpPortDataSetControlLogMinPdelayReqIntervallook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.15 |
shePtpPortDataSetControlAlarmSeverityIndexlook at tablerw SheAlarmSevProfileIndex (SHE-ALARMING-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.7.16 |
shePtpForeignMasterDataSetTableThis table is maintained for the purpose of qualifying Announce messages, it is used by best master clock algorithm. There will be an entry dynamically created in the table for each master clock from which Announce messages are received on corresponding (shePtpPortDSPortNumber) clock port. SEQUENCE OF ShePtpForeignMasterDataSetEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8 |
shePtpForeignMasterDataSetEntryPTP configuration information for a particular port. ShePtpForeignMasterDataSetEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1 |
shePtpForeignMasterDSIndexSecond Index for table, Count of foreign master entries on a port. Foreign Master Data set shall have a minimum capacity of 5 foreign master recordsro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.1 |
shePtpForeignMasterDSNumberForeignRecordsCount of foreign clock records on a port. This equals to the actual number of foreign clocks from which Announce messages are received. Table shall have a minimum capacity of 5 foreign master records.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.2 |
shePtpForeignMasterDSClockIdentityPart of the sourcePortIdentity field value of an Announce message received from the foreign master.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.3 |
shePtpForeignMasterDSPortNumberPart of the sourcePortIdentity field value of an Announce message received from the foreign master.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.4 |
shePtpForeignMasterDSAnnounceMessagesThe number of Announce messages from the foreign master indicated by the shePtpForeignMasterDSClockIdentity and shePtpForeignMasterDSPortNumber (foreignMasterPortIdentity) that have been received within a time window of duration 4 * shePtpPortDSLogMeanAnnounceInterval.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.5 |
shePtpForeignMasterDSNetworkProtocolSupported PTP transport protocol is only IP/UDP.ro ShePtpAcceptableMasterNetworkProtocolType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.6 |
shePtpForeignMasterDSProtocolAddressLengthSupported PTP transport protocol is only IP/UDP so address length is always 4.ro Integer32 (4) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.7 |
shePtpForeignMasterDSProtocolAddressThe IP address of the detected foreign master.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.8.1.8 |
shePtpAcceptableMasterTableConfigure acceptable master clocks entries. SEQUENCE OF ShePtpAcceptableMasterEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9 |
shePtpAcceptableMasterEntryAn entry per each PTP server to which this slave clock is allowed to synchronize. All Announce and other PTP messages sent by master clock which is not in the shePtpAcceptableMasterTable will be ignored, e.g. not considered by Best Master Clock algorithm. ShePtpAcceptableMasterEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1 |
shePtpAcceptableMasterIndexIndex for table, Count of configured acceptable master entries.ro Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.1 |
shePtpAcceptableMasterNetworkProtocolSupported PTP transport protocol is only IP/UDP.ro ShePtpAcceptableMasterNetworkProtocolType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.2 |
shePtpAcceptableMasterProtocolAddressLengthSupported PTP transport protocol is only IP/UDP so address length is always 4.ro Integer32 (4) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.3 |
shePtpAcceptableMasterProtocolAddressThe IP address of the configured acceptable master.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.4 |
shePtpAcceptableMasterPriorityThis attribute is an alternate priority to be used to determine best master clock. If shePtpAcceptableMasterPriority is 0 it shall have no effect on computation determination of best master clock. If the value of shePtpAcceptableMasterPriority is greater than 0, the value of priority1 in the Announce message from the remote port shall be replaced by the value of the shePtpAcceptableMasterPriority for purposes of determining best master clock.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.5 |
shePtpAcceptableMasterUnicastThis attribute determines the communications type used for PTP messages (unicast/multicast). It depends on destination IP address type of the packets (master clock port address or IP multicast domain). It is set to TRUE if unicast communication is used or set to FALSE if multicast addresses are used (standard PTP assigned IP multicast addresses).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.6 |
shePtpAcceptableMasterMinTimingPktSizeThe minimum packet size to use for packets carrying timing information. This is the total packet size after all protocol headers have been added, but excluding the Ethernet FCS. The required packet size is achieved by adding padding bytes to the minimum timing packet size required by the PTP protocol. If the specified value is less than the minimum quired by the protocol it will be ignored. Hence specifying zero will always use the standard packet size - no padding will be added to the PTP messages.ro Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.7 |
shePtpAcceptableMasterSyncStatusThis parameter show the clock recovery algorithm status which is an enum of values { FREERUN, HOLDOVER, ACQUIRING, ACQUIRED }. For normal operation, i.e. when this slave clock is synchronized to any master clock that attribute will have 'ACQUIRED' value.ro ShePtpAcceptableMasterSyncStateType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.9.1.8 |
shePtpAcceptableMasterControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10 |
shePtpAcceptableMasterControlRequestcreatePtpAcceptableMasterTableEntry (12): shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize modifyPtpAcceptableMasterTableEntry (13): shePtpAcceptableMasterControlIndex shePtpAcceptableMasterControlProtocolAddress shePtpAcceptableMasterControlPriority shePtpAcceptableMasterControlUnicast shePtpAcceptableMasterControlMinTimingPktSize deletePtpAcceptableMasterTableEntry (14): shePtpAcceptableMasterControlIndexrw ShePtpControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.1 |
shePtpAcceptableMasterControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.2 |
shePtpAcceptableMasterControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.3 |
shePtpAcceptableMasterControlReqResultThe result of the last user command.ro ShePtpControlRequestResultType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.4 |
shePtpAcceptableMasterControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.5 |
shePtpAcceptableMasterControlIndexThe index of acceptable master table entry for configuration.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.6 |
shePtpAcceptableMasterControlProtocolAddresslook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.7 |
shePtpAcceptableMasterControlPrioritylook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.8 |
shePtpAcceptableMasterControlUnicastlook at table.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.9 |
shePtpAcceptableMasterControlMinTimingPktSizelook at table.rw Integer32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.10.10 |
shePtpUnicastDiscoveryMasterTableThe table is used by this slave clock to start negotiation of message rates with required master clocks. It is only meaningful when unicast communications is used and shePtpPortDSUnicastNegotiationEnabled attribute of corresponding clock port is set to TRUE. SEQUENCE OF ShePtpUnicastDiscoveryMasterEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11 |
shePtpUnicastDiscoveryMasterEntryRequest, that the master identified by this antry, transmits unicast Announce, Sync and Delay_Resp messages to that slave clock will be sent. PTP message rates autonegotiation will be performed with a master identified by this entry. ShePtpUnicastDiscoveryMasterEntry .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11.1 |
shePtpUnicastDiscoveryMasterIndexsecond table Indexro ShePtpUnicastDiscoveryMasterIndexType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11.1.1 |
shePtpUnicastDiscoveryMasterNetworkProtocolSupported PTP transport protocol is only IP/UDP.ro ShePtpAcceptableMasterNetworkProtocolType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11.1.2 |
shePtpUnicastDiscoveryMasterProtocolAddressLengthSupported PTP transport protocol is only IP/UDP so address length is always 4.ro Integer32 (4) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11.1.3 |
shePtpUnicastDiscoveryMasterProtocolAddressProtocol address of master clock port to which this slave clock is to be sending unicast message GRANT REQUESTS, i.e. unicast discovery of the master which port address is added to the shePtpUnicastDiscoveryMasterTable shall be in effect right after an entry is added (if this address is not yet in the shePtpUnicastDiscoveryMasterTable and PTP message rates are not already negotiated). Please NOTE that the master's port address must be added in advance to the shePtpAcceptableMasterTable too.ro OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.11.1.4 |
shePtpUnicastDiscoveryMasterControl OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12 |
shePtpUnicastDiscoveryMasterControlRequestcreatePtpUnicastDiscoveryMasterTableEntry (15): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlProtocolAddress modifyPtpUnicastDiscoveryMasterTableEntry (16): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndex shePtpUnicastDiscoveryMasterControlProtocolAddress deletePtpUnicastDiscoveryMasterTableEntry (17): shePtpUnicastDiscoveryMasterControlPortDsNumber shePtpUnicastDiscoveryMasterControlIndexrw ShePtpControlRequestType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.1 |
shePtpUnicastDiscoveryMasterControlControlStatusThe status of a user command.ro SheControlStatusType (SHE-TC-MIB) .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.2 |
shePtpUnicastDiscoveryMasterControlTimerThe maximum wait time for the manager for a long running user command.ro Gauge32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.3 |
shePtpUnicastDiscoveryMasterControlReqResultThe result of the last user command.ro ShePtpControlRequestResultType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.4 |
shePtpUnicastDiscoveryMasterControlTimeStampThe time stamp of the last command (end of command).ro Unsigned32 UNITS "sec" .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.5 |
shePtpUnicastDiscoveryMasterControlPortDsNumberThe index 1 of unicast discovery master table entry for configuration - portDs index.rw Unsigned32 .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.6 |
shePtpUnicastDiscoveryMasterControlIndexThe index 2 of unicast discovery master table.rw ShePtpUnicastDiscoveryMasterIndexType .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.7 |
shePtpUnicastDiscoveryMasterControlProtocolAddresslook at table.rw OCTET STRING .1.3.6.1.4.1.231.7.1.2.2.1.22.1.12.8 |
shePtpNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.2 |
shePtpEvents OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1 |
shePtpAdminStateChangedThe administrative state of the PTP subsystem has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.1 |
shePtpDefaultDataSetModifiedNotification for successful PTP default data set configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.2 |
shePtpPortConfigDataModifiedNotification for successfull PTP port config data configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.3 |
shePtpAcceptableMasterTableEntryCreatedNotification for successfull create of PTP acceptable master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.4 |
shePtpAcceptableMasterTableEntryModifiedNotification for successfull modify of PTP acceptable master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.5 |
shePtpAcceptableMasterTableEntryDeletedNotification for successfull delete of PTP acceptable master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.6 |
shePtpUnicastDiscoveryMasterTableEntryCreatedNotification for successfull create of PTP unicast discovery master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.7 |
shePtpUnicastDiscoveryMasterTableEntryModifiedNotification for successfull modify of PTP unicast discovery master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.8 |
shePtpUnicastDiscoveryMasterTableEntryDeletedNotification for successfull delete of PTP unicast discovery master table entry. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.9 |
shePtpForeignMasterTableChangedThis trap will be send if the foreign master table changes because of new detected masters or a alraedy detected entry is lost. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.1.10 |
shePtpAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.2.2 |
shePtpSynchronizationAlarmThis alarm will be activated if the ptp sync module is enabled and no external sync master was found or connection could not be established or was lost. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.2.1 |
shePtpIpHostInterfaceAlarmThis alarm will be activated: 1. If the ptp sync module is enabled and no valid IpHostInterface configuration could be detected. -> Configure a valid host interface via sheSystemIpHostTable. 2. The used interface was reconfigured during ongoing PTP session. -> The PTP module must be restarted. NOTIFICATION-TYPE .1.3.6.1.4.1.231.7.1.2.2.1.22.2.2.2 |
shePtpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.100 |
shePtpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.100.1 |
shePtpComplianceThe compliance statement for SNMP entities which implement the PTP MIB. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.22.100.1.1 |
shePtpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.231.7.1.2.2.1.22.100.2 |
shePtpGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.22.100.2.1 |
shePtpControlGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.22.100.2.2 |
shePtpNotificationGroupDescription. Unknown .1.3.6.1.4.1.231.7.1.2.2.1.22.100.2.3 |