S5-ETHERNET-MIB
Imported Objects
Objects
13 total| Object Name |
|---|
s5EnCfg OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.6.1 |
IMPORTS Unknown .1.3.6.1.4.1.45.1.6.6.1 |
s5EnStat OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.6.2 |
s5EnMisc OBJECT IDENTIFIER .1.3.6.1.4.1.45.1.6.6.3 |
s5EnPIntconTableA table controlling the Interconnect status
of each managed Ethernet connectivity port that
is connected to the same backplane network as
each NMM agent interface. The number of entries
is determined by the number of managed ports
connected to backplane networks which the
NMM's interfaces are also connected to. SEQUENCE OF S5EnPIntconEntry .1.3.6.1.4.1.45.1.6.6.3.1 |
s5EnPIntconEntryA row in the Ethernet port Interconnect control table.
Entries can not be created or deleted via SNMP. S5EnPIntconEntry .1.3.6.1.4.1.45.1.6.6.3.1.1 |
s5EnPIntconIfIndxThe index of interface on the NMM.
This has the same value as ifIndex for
the interface.ro INTEGER .1.3.6.1.4.1.45.1.6.6.3.1.1.1 |
s5EnPIntconBrdIndxThe index of the board. This corresponds to
the index of the slot containing the board.ro INTEGER .1.3.6.1.4.1.45.1.6.6.3.1.1.2 |
s5EnPIntconPortIndxThe index of the port on the board. Its
value ranges between 1 and index of the last
manageable port on the board.ro INTEGER .1.3.6.1.4.1.45.1.6.6.3.1.1.3 |
s5EnPIntconIntconStatusThe interconnection status of the port.
This object tells whether the port is
connected to a host or to an interconnect
(defined to be another NMM or a bridge that
is sending hello messages). The values are:
other(1)..........unknown or host
interconnect(2)...identified as
interconnect port
The NMM agent will assign this object the
value other(1) on initialization. If it
sees hello messages coming in on the port,
it will change the interconnection status
to be interconnect(2).ro Enumeration .1.3.6.1.4.1.45.1.6.6.3.1.1.4 |
s5EnPIntconAddrCollectThis object tells whether the NMM should
collect node address information from this
port for the Find Nodes and Show Nodes tables.
By default, the node addresses are collected
only from ports that are not identified as
interconnect ports. This object provides a
means of overriding the default for collection
and checking of node addresses. The values are:
default(1).........follow default rules for
address collection
neverCollect(2)....don't collect addrs,
whatever intercon status
alwaysCollect(3)...do collect address,
regardless of config
Setting this variable to default(1) tells the
NMM to collect and check addresses if and only
the port has not been identified as an
interconnect port.
To disable node address collection
on a port, set this object to neverCollect(2).
To collect node addresses for an
interconnect port, set this object to
alwaysCollect(3).
To restore the 'natural' value for the port,
set this object to default(1).rw Enumeration .1.3.6.1.4.1.45.1.6.6.3.1.1.5 |
s5EnNodeInactIntervalThe time interval in seconds used to change the
status of an entry in the Show Nodes Table
(found in the 5000 Common Stats MIB) from active
to inactive. When a station has not sent a frame
within the time interval represented by this
object, the status for the corresponding entry
is set to inactive.rw TimeIntervalSec .1.3.6.1.4.1.45.1.6.6.3.2 |
s5EnNodeAgeIntervalThe time interval in seconds used for aging out
entries in the Show Nodes and Find Nodes Tables
(found in the 5000 Common Stats MIB). When a
station has not sent a frame within the time
interval represented by this object, the
corresponding entry is removed from the two
tables.rw TimeIntervalSec .1.3.6.1.4.1.45.1.6.6.3.3 |
More MIBs from Synoptics
Browse all SynopticsMIBs →SNMP MIB module
Standard SNMP MIB module defining data structures for SYNOPTICS-BASIC-ETHTOK-MIB.
Standard SNMP MIB module defining data structures for SYNOPTICS-ETHERNET-MIB.
The NTWS-AP-STATUS-MIB enables SNMP-based monitoring of Access Point operational states and connectivity metrics on Nortel Networks wireless switches (Access Controllers). It provides specific management objects for tracking the status, association, and performance indicators of wireless Access Points managed by the switch's agent.
The NTWS-AP-CONFIG-MIB enables SNMP-based configuration management of Access Point parameters on Nortel Networks wireless switches (Access Controllers), specifically exposing objects for SSID settings, radio channel assignments, transmit power levels, and security policy definitions. This module allows centralized controllers to retrieve and modify the operational state of associated lightweight access points without requiring direct agent interaction on the AP hardware.
The NTWS-TRAP-MIB module defines SNMP notification objects for Nortel Networks wireless switches (Access Controllers) to report critical operational events and fault conditions for associated Access Points. These notifications enable network management systems to detect and respond to specific wireless infrastructure anomalies, such as AP connectivity loss, controller failures, or configuration state changes.