RESOURCE-MIB
Imported Objects
Objects
11 total| Object Name |
|---|
swCpuOrMemoryUsageThe MIB module is for system information. Copyright (c) 1996-2003 Brocade Communications Systems, Inc. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.1588.2.1.1.1.26 |
swCpuUsageSystem's cpu usage.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.1 |
swCpuNoOfRetriesNumber of times system should take cpu utilization sample before sending the CPU utilization trap.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.2 |
swCpuUsageLimitIt describes the CPU usage limit in percentage. If the cpu usage value exceeds the limit then the appropriate action will be taken based on the swCpuAction value.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.3 |
swCpuPollingIntervalTime interval between two memory samples.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.4 |
swCpuActionSpecifies the actions to be taken if system resources exceed the specified threshold.ro Enumeration .1.3.6.1.4.1.1588.2.1.1.1.26.5 |
swMemUsageSystem's memory usage.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.6 |
swMemNoOfRetriesNumber of times system should take memory usage sample before sending the memory usage trap.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.7 |
swMemUsageLimitIt describes the Memory usage limit in percentage. If the memory usage value exceeds the limit then the appropriate action will be taken based on the swMemAction value.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.8 |
swMemPollingIntervalTime interval between two memory samples.ro Integer32 .1.3.6.1.4.1.1588.2.1.1.1.26.9 |
swMemActionSpecifies the actions to be taken if system resources exceed the specified threshold.ro Enumeration .1.3.6.1.4.1.1588.2.1.1.1.26.10 |
More MIBs from Brocade
Browse all BrocadeMIBs →SW-MIB provides management and monitoring capabilities for Brocade Fibre Channel switches, exposing critical operational metrics such as port status, traffic counters, buffer credits, and fabric topology state. This module enables the collection of performance data and fault detection for storage area network (SAN) infrastructure via SNMP.
The BROCADE-SYSTEM-MIB provides standard SNMP access to Brocade Fibre Channel and Ethernet switch system-level attributes, including device identity, hardware status, environmental sensors, and operational counters. It enables centralized monitoring of critical infrastructure health metrics such as temperature, fan status, power supply states, and system uptime across the Brocade SAN and LAN fabric.
The LINK-INCIDENT-MIB module monitors FICON link incident and failure events for host and device connections to Brocade Fibre Channel switches within Fabos environments. It provides specific counters and status indicators to track link stability and fault conditions for FICON traffic traversing the switch fabric.
The BROCADE-MPLS-MIB enables monitoring and management of Multi-Protocol Label Switching (MPLS) operational states and traffic statistics on Extreme Networks (formerly Brocade) routing platforms. It provides access to specific metrics including MPLS label forwarding table entries, LSP (Label Switched Path) status, and associated interface counters for troubleshooting label-switched network performance.
The BROCADE-TMSTATS-MIB module provides SNMP access to performance counters and operational statistics for Brocade Traffic Manager (TM) hardware and software components, specifically monitoring data plane throughput, packet processing rates, buffer utilization, and traffic flow metrics.
The BROCADE-ACL-MIB enables SNMP-based configuration and monitoring of Access Control List (ACL) policies on Brocade Fibre Channel and Ethernet switches, specifically tracking rule definitions, hit counts, and packet drop statistics to enforce network segmentation and security.