RDN-DLB-MIB
Mib module for Motorola Dynamic Load Balancing. Copyright (C) 2004, 2008 by Motorola, Inc. All rights reserved.
Main OID:
rdnLoadBalance.1.3.6.1.4.1.4981.8
14
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
rdnLoadBalanceMib module for Motorola Dynamic Load Balancing. Copyright (C) 2004, 2008 by Motorola, Inc. All rights reserved. MODULE-IDENTITY .1.3.6.1.4.1.4981.8 |
rdnLoadBalBasicRuleTableLoad Balance Basic Rule Table. SEQUENCE OF RdnLoadBalBasicRuleEntry .1.3.6.1.4.1.4981.8.1 |
rdnLoadBalBasicRuleEntryLoad Balance Basic Rule Table entry. RdnLoadBalBasicRuleEntry .1.3.6.1.4.1.4981.8.1.1 |
rdnLoadBalBasicRuleIdAn index uniquely identifying an entry in the rdnLoadBalBasicRuleTable. Unsigned32 .1.3.6.1.4.1.4981.8.1.1.1 |
rdnLoadBalBasicRuleEnableWhen using this rule set, the load balancing algorithm is based on upstream and downstream utilization by the values upstream(1) and downstream(2) respectively. Additionally, a Load Balancing groups interval can be defined by value interval(3). Upstream Load Balancing during modem registration can be enabled by value registration(4). Load Balancing after a resource failure due to a DSX from a CPE can be enabled by value rem-dsx(5). Load balancing triggered by a Spectrum Management bit rate change can be enabled by value spec-trig(6). Downstream Load Balancing during modem registration can be enabled by value ds-reg(7). Upstream Load Balancing with Bonding Groups during modem registration can be enabled by value us-reg-bonding(8). Downstream Load Balancing with Bonding Groups during modem registration can be enabled by value ds-reg-bonding(9). The load balancing utilization thresholds are defined by the objects rdnLoadBalBasicRuleMinThres, rdnLoadBalBasicRuleDeltaThres and rdnLoadBalBasicRuleStopThres objects if this object value is set to upstream(1) or downstream(2). The modem count threshold is defined by the object rdnLoadBalBasicRuleModemCountThres if this object value is set to registration(4), ds-reg(7), us-reg-bonding(8), or ds-reg-bonding(9).rw Enumeration .1.3.6.1.4.1.4981.8.1.1.2 |
rdnLoadBalBasicRuleMinThresIf object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the minimum percentage of utilization that a channel must have to start load balancing is defined by this value. Otherwise, this object has no meaning.rw Unsigned32 .1.3.6.1.4.1.4981.8.1.1.3 |
rdnLoadBalBasicRuleDeltaThresIf object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage of utilization between two load balancing group channels that must exist to start load balancing is defined by this value. Otherwise, this object has no meaning.rw Unsigned32 .1.3.6.1.4.1.4981.8.1.1.4 |
rdnLoadBalBasicRuleStopThresIf object rdnLoadBalBasicRuleEnable is upstream(1) or downstream(2), the delta percentage of utilization between two load balancing group channels that should be met to stop load balancing is defined by this value. Otherwise, this object has no meaning.rw Unsigned32 .1.3.6.1.4.1.4981.8.1.1.5 |
rdnLoadBalBasicRuleRowStatusThis object is to create or delete rows in this table. There is no restriction for changing this row status or object's values in this table at any time.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4981.8.1.1.7 |
rdnLoadBalBasicRuleModemCountThresIf object rdnLoadBalBasicRuleEnable is registration(4), the modem count threshold represents the maximum allowed difference in modem count between the modem's initial upstream channel and the least loaded upstream channel in the load balance group. If the threshold is exceeded the modem is moved to the least loaded upstream channel otherwise the modem remains on its initial upstream channel.rw Unsigned32 .1.3.6.1.4.1.4981.8.1.1.8 |
rdnLoadBalOperationsAvailable Load Balance Operations Unknown .1.3.6.1.4.1.4981.8.2 |
rdnLoadBalanceUpstreamModemCountPerform upstream load-balancing based on modem count. 0 = Perform on all enabled Load-Balance Groups. [1-255] = Perform on a specific Load-Balance Group based on group ID. Reading this object always returns zero.rw Unsigned32 .1.3.6.1.4.1.4981.8.2.1 |
rdnLoadBalanceDnstreamModemCountPerform downstream load-balancing based on modem count. 0 = Perform on all enabled Load-Balance Groups. [1-255] = Perform on a specific Load-Balance Group based on group ID. Reading this object always returns zero.rw Unsigned32 .1.3.6.1.4.1.4981.8.2.2 |
rdnLoadBalGroupIntervalThe period at which load balancing process will be initiated for any load balancing group in the system.rw Unsigned32 .1.3.6.1.4.1.4981.8.3 |