RDN-CABLE-SPECTRUM-GROUP-MIB
AI MIB Summary
The RDN-CABLE-SPECTRUM-GROUP-MIB enables MCNS-compliant Cable Modem Termination Systems (CMTS) to monitor and configure spectrum group parameters, including frequency allocations, channel bandwidths, and modulation profiles, for downstream and upstream cable transmission management.
This is the MIB Module for Cable Spectrum Group Management for MCNS compliant Cable Modem Termination Systems (CMTS).
Main OID:
rdnCableSpectrumGroup.1.3.6.1.4.1.4981.6.1.2
69
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
rdnCableSpectrumGroupThis is the MIB Module for Cable Spectrum Group Management for MCNS compliant Cable Modem Termination Systems (CMTS). MODULE-IDENTITY .1.3.6.1.4.1.4981.6.1.2 |
rdnSpectrumGroupTableThis table keeps the records of spectrum groups. These groups can be configured and activated by the spectrum manager and used by the CMTS upstream port for frequency hopping. SEQUENCE OF RdnSpectrumGroupEntry .1.3.6.1.4.1.4981.6.1.2.1 |
rdnSpectrumGroupEntryList of attributes for an entry in the rdnSpectrumGroupEntry. An entry in this table exists for each spectrum group that has been configured by the spectrum manager. RdnSpectrumGroupEntry .1.3.6.1.4.1.4981.6.1.2.1.1 |
rdnSpectrumGroupNameThe text name (index) of the spectrum group.ro DisplayString ( SIZE .1.3.6.1.4.1.4981.6.1.2.1.1.1 |
rdnSpectrumGroupIdThe number index for the spectrum group.ro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.2 |
rdnSpectrumGroupHopPeriodThe rate at which the frequency hop takes place. This would be useful in preventing excessive hops. Unit is in second.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.3 |
rdnSpectrumGroupHopThresholdFlapThe CM flap rate percentage threshold that controls the hopping frequency. The hopping only happens when the percentage of flap CMs is higher than this threshold. Value 0 means the flap threshold hop disabledrw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.4 |
rdnSpectrumGroupHopThresholdErrorThe FEC error rate percentage threshold that controls the hopping frequency. The hopping only happens when the error rate percentage is higher than this threshold. The unit is 1/1000.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.5 |
rdnSpectrumGroupHopRollbackEnableThis field controls the spectrum rollback option when the original channel quality recovers. The rollback is allowed when this field is enabled. The rollback is not allowed when this field is set to disable.rw Enumeration .1.3.6.1.4.1.4981.6.1.2.1.1.6 |
rdnSpectrumDataCollectResolutionThe spectrum data collection resolution, in Hz.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.7 |
rdnSpectrumDataCollectIntervalThe spectrum data collection interval, in second. Minimum value 60 seconds. Value 0 means the collection is disabled.rw Unsigned32 (0 | 60..65535) .1.3.6.1.4.1.4981.6.1.2.1.1.8 |
rdnSpectrumGroupGuardBandThe minimum spectrum separation between upstream channels in the same spectrum group, in Hz.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.1.1.9 |
rdnSpectrumGroupRowStatusControls and reflects the status of rows in this table. This field is used to control the addition and deletion of a spectrum group.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.1.1.10 |
rdnOfflineModemCountNumber of offline modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.11 |
rdnOnlineModemCountNumber of online modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.12 |
rdnActiveModemCountNumber of active modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.13 |
rdnRegisteredModemCountNumber of registered modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.14 |
rdnProvisionedModemCountNumber of provisioned modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.15 |
rdnUnregisteredModemCountNumber of Unregistered modems for this spectrum groupro Integer32 .1.3.6.1.4.1.4981.6.1.2.1.1.16 |
rdnSpectrumBandSchedTableThis table keeps the records of spectrum band scheduled for a specific spectrum group. SEQUENCE OF RdnSpectrumBandSchedEntry .1.3.6.1.4.1.4981.6.1.2.2 |
rdnSpectrumBandSchedEntryList of attributes for an entry in the rdnSpectrumBandScheEntry. RdnSpectrumBandSchedEntry .1.3.6.1.4.1.4981.6.1.2.2.1 |
rdnSpectrumBandSchedIdThe identifier for the band schedule, it is the second index for the spectrum band schedule table. Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.1 |
rdnSpectrumBandSchedActionThe action on the specified frequency band. The third index of this band schedule table. Band add (1), band delete (2).ro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.2 |
rdnSpectrumBandFreqLowThe spectrum band low frequency in Hz. The lower bound is 5 MHz for North American standard, is 5 MHz for European standard.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.3 |
rdnSpectrumBandFreqHighThe spectrum band high frequency in Hz. This value must be at least 200000 Hz higher than the band low frequency. The upper bound is 42 MHz for North American standard, is 65 MHz for European standard.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.4 |
rdnSpectrumBandSchedWeekDayThe week day of the band schedule.rw SchedulingWeekDay .1.3.6.1.4.1.4981.6.1.2.2.1.5 |
rdnSpectrumBandSchedHourThe hour of the band schedule (in 24-hour format).rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.6 |
rdnSpectrumBandSchedMinuteThe minute of the band schedule.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.7 |
rdnSpectrumBandSchedSecondThe second of the band schedule.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.2.1.8 |
rdnSpectrumBandSchedRowStatusThe row status that controls the addition and deletion of the band schedule entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.2.1.9 |
rdnSpectrumHopTableThis table keeps the records of spectrum hopping rules for a specific spectrum group. SEQUENCE OF RdnSpectrumHopEntry .1.3.6.1.4.1.4981.6.1.2.3 |
rdnSpectrumHopEntryList of attributes for an entry in the rdnSpectrumHopTable. RdnSpectrumHopEntry .1.3.6.1.4.1.4981.6.1.2.3.1 |
rdnSpectrumHopIdThe index for the spectrum hop rule table. Unsigned32 .1.3.6.1.4.1.4981.6.1.2.3.1.1 |
rdnSpectrumHopSelectionIdentifies the selection of the action for this spectrum hop rule.rw SpectrumHopSelections .1.3.6.1.4.1.4981.6.1.2.3.1.2 |
rdnSpectrumHopPriorityIdentifies the priority for this spectrum hop policy. The default value is 128. The range is 1 to 255.rw INTEGER .1.3.6.1.4.1.4981.6.1.2.3.1.3 |
rdnSpectrumHopFrequencyIdentifies the center frequency for the spectrum hop schedule entry. The hop can be specified with a discrete center frequency or with a band but not both in the same group.rw Unsigned32 ( 5000000..65000000 ) .1.3.6.1.4.1.4981.6.1.2.3.1.4 |
rdnSpectrumHopBandLowThe start frequency for the individual spectrum hop.rw Unsigned32 ( 5000000..65000000 ) .1.3.6.1.4.1.4981.6.1.2.3.1.5 |
rdnSpectrumHopBandHighThe stop frequency for the individual spectrum hop. This value must be at least 200000 Hz higher than the start frequency.rw Unsigned32 ( 5000000..65000000 ) .1.3.6.1.4.1.4981.6.1.2.3.1.6 |
rdnSpectrumHopChannelWidthIdentifies the channel width change for this individual spectrum hop. The valid band width is 200000 Hz, 400000 Hz, 800000 Hz, 1600000 Hz, 3200000 Hzrw Enumeration .1.3.6.1.4.1.4981.6.1.2.3.1.7 |
rdnSpectrumHopPowerLevelIdentifies a power level change for this individual spectrum hop. Different channel width has different power level range, < -160, 140 > for 200 KHz, < -130, 170 > for 400 KHz, < -100, 200 > for 800 KHz, < -70, 230 > for 1600 KHz, < -40, 260 > for 3200 KHz. For power default, the range is < -150, 150 > for all the channel widths. The unit is in tenths of a dBmV.rw INTEGER ( -160..260 ) .1.3.6.1.4.1.4981.6.1.2.3.1.8 |
rdnSpectrumHopModulationProfileIdentifies the modulation profile change for this individual spectrum hop.rw INTEGER ( 1..16 ) .1.3.6.1.4.1.4981.6.1.2.3.1.9 |
rdnSpectrumHopRowStatusThe row status that controls the add and deletion of the spectrum hop rule entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.3.1.10 |
rdnSpectrumMemberChannelTableThis table keeps the records of the associations between upstream channels and spectrum groups SEQUENCE OF RdnSpectrumMemberChannelEntry .1.3.6.1.4.1.4981.6.1.2.4 |
rdnSpectrumMemberChannelEntryList of attributes for an entry in the RdnSpectrumMemberChannelEntry. It is indexed by ifIndex. RdnSpectrumMemberChannelEntry .1.3.6.1.4.1.4981.6.1.2.4.1 |
rdnUsChannelIdThe upstream channel ID.ro INTEGER .1.3.6.1.4.1.4981.6.1.2.4.1.1 |
rdnMemChSpectrumGroupIdThe ID for the spectrum group that is associated with this upstream channel. Value 0 means no association.rw Unsigned32 .1.3.6.1.4.1.4981.6.1.2.4.1.2 |
rdnMemChSpectrumGroupNameThe text name of the associated spectrum group.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.4.1.3 |
rdnSpectrumDataTableThis table stores the noise and error rate for the different frequency bands. SEQUENCE OF RdnSpectrumDataEntry .1.3.6.1.4.1.4981.6.1.2.5 |
rdnSpectrumDataEntryList of attributes for an entry in the rdnSpectrumDataEntry. RdnSpectrumDataEntry .1.3.6.1.4.1.4981.6.1.2.5.1 |
rdnSpectrumDataIndexThe internal index of the spectrum dataro INTEGER .1.3.6.1.4.1.4981.6.1.2.5.1.1 |
rdnSpecDataUsChannelIdThe upstream channel ID.ro INTEGER .1.3.6.1.4.1.4981.6.1.2.5.1.2 |
rdnSpectrumDataStartFrequencyStart Frequency of the spectrum data collectionro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.5.1.3 |
rdnSpectrumDataResolutionResolution of the spectrum data collection in Hzro INTEGER .1.3.6.1.4.1.4981.6.1.2.5.1.4 |
rdnSpectrumDataSamplesNumber of data samples used in this spectrum data collection periodro INTEGER .1.3.6.1.4.1.4981.6.1.2.5.1.5 |
rdnSpectrumDataLastUpdateDate and time when this collection data was last updatedro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.5.1.6 |
rdnSpectrumDataArrayThe data array that holds the spectrum data.ro SpecDataArray ( SIZE .1.3.6.1.4.1.4981.6.1.2.5.1.7 |
rdnSpectrumQualityTableThis table stores the spectrum quality information. SEQUENCE OF RdnSpectrumQualityEntry .1.3.6.1.4.1.4981.6.1.2.6 |
rdnSpectrumQualityEntryList of attributes for an entry in the rdnSpectrumDataEntry. RdnSpectrumQualityEntry .1.3.6.1.4.1.4981.6.1.2.6.1 |
rdnSpecQualityUsChIdIdentifies the upstream channel id for which the spectrum signal quality is gathered.ro INTEGER .1.3.6.1.4.1.4981.6.1.2.6.1.1 |
rdnSpectrumQualityDataLastUpdateDate and time when this data was last updatedro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.4981.6.1.2.6.1.2 |
rdnSpectrumDataInBandPowerThe in-band power for this frequency band. The unit is the tenths of dBmV.ro INTEGER .1.3.6.1.4.1.4981.6.1.2.6.1.3 |
rdnSpectrumTotCodeWordThe total number of code words transfer through this interfacero Unsigned32 .1.3.6.1.4.1.4981.6.1.2.6.1.4 |
rdnSpectrumErrorCodeWordThe uncorrectable error code words received through this interface.ro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.6.1.5 |
rdnSpectrumMapTableThis table keeps the records of spectrum usage. SEQUENCE OF RdnSpectrumMapEntry .1.3.6.1.4.1.4981.6.1.2.7 |
rdnSpectrumMapEntryList of attributes for an entry in the rdnSpectrumMapEntry. RdnSpectrumMapEntry .1.3.6.1.4.1.4981.6.1.2.7.1 |
rdnSpectrumMapIndexIdentifies an entry in the spectrum map table INTEGER .1.3.6.1.4.1.4981.6.1.2.7.1.1 |
rdnSpectrumMapStartFrequencyThe start frequency of the current spectrum band.ro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.7.1.2 |
rdnSpectrumMapStopFrequencyThe stop frequency of the current spectrum band.ro Unsigned32 .1.3.6.1.4.1.4981.6.1.2.7.1.3 |
rdnSpectrumMapStatusThe spectrum band status. null (0), available (1), occupied (2), admin-down (3)ro INTEGER .1.3.6.1.4.1.4981.6.1.2.7.1.4 |