RDN-CHASSIS-MIB
The RDN-CHASSIS-MIB provides SNMP management capabilities for Motorola chassis hardware, enabling the monitoring of physical entity states, power supply status, fan module health, and temperature sensors. This module facilitates the retrieval of interface and module operational data to support fault detection and resource availability verification within the chassis infrastructure.
Imported Objects
Objects
42 total| Object Name |
|---|
rdnChassisMIB module for Motorola
Chassis. MODULE-IDENTITY .1.3.6.1.4.1.4981.1 |
rdnChassisTypeChassis type.ro Enumeration .1.3.6.1.4.1.4981.1.1 |
rdnChassisVersionChassis hardware revision level, or an empty
string if unavailable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.2 |
rdnChassisIdUnique ID string. Defaults to chassis serial
number if available, otherwise empty. Can
also be set with 'snmp-server chassis-id'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.3 |
rdnProcessorRamBytes of RAM available to CPU.ro Integer32 .1.3.6.1.4.1.4981.1.4 |
rdnNvRAMSizeBytes of non-volatile configuration memory.ro Integer32 .1.3.6.1.4.1.4981.1.5 |
rdnNvRAMUsedBytes of non-volatile configuration memory
in use.ro Integer32 .1.3.6.1.4.1.4981.1.6 |
rdnFlashSizeBytes flash memory.ro Integer32 .1.3.6.1.4.1.4981.1.7 |
rdnCardTableChassis card table. SEQUENCE OF RdnCardEntry .1.3.6.1.4.1.4981.1.8 |
rdnCardEntryChassis card table. RdnCardEntry .1.3.6.1.4.1.4981.1.8.1 |
rdnCardIndexIndex into cardTable (not physical chassis
slot number).ro Integer32 .1.3.6.1.4.1.4981.1.8.1.1 |
rdnCardTypeFunctional type of this card.ro Enumeration .1.3.6.1.4.1.4981.1.8.1.2 |
rdnCardDescrText description of this card.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.8.1.3 |
rdnCardSerialThe serial number of this card, or zero if
unavailable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.8.1.4 |
rdnCardHwVersionHardware revision level of this card, or an
empty string if unavailable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.8.1.5 |
rdnCardSwVersionVersion of the firmware or microcode
installed on this card, or an empty string if
unavailable.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.4981.1.8.1.6 |
rdnCardSlotNumberSlot number relative to the containing card or
chassis, or -1 if neither applicable nor
determinable.ro Integer32 .1.3.6.1.4.1.4981.1.8.1.7 |
rdnCardContainedByIndexcardIndex of the parent card which
directly contains this card, or 0 if
contained by the chassis, or -1 if not
applicable nor determinable.ro Integer32 .1.3.6.1.4.1.4981.1.8.1.8 |
rdnCardOperStatusThe operational status of the card.
cardOperStatus is up when a card is
recognized by the device and is enabled for
operation. cardOperStatus is down if the
card is not recognized by the device, or if
it is not enabled for operation.
cardOperStatus is standby if the card is
enabled and acting as a standby slavero Enumeration .1.3.6.1.4.1.4981.1.8.1.9 |
rdnChassisSlotsNumber of slots in this chassis, or -1 if
neither applicable nor determinable.ro Integer32 .1.3.6.1.4.1.4981.1.9 |
rdnSlotTableChassis slot table. SEQUENCE OF RdnSlotEntry .1.3.6.1.4.1.4981.1.10 |
rdnSlotEntryChassis slot table. RdnSlotEntry .1.3.6.1.4.1.4981.1.10.1 |
rdnSlotIndexIndex into slotTable (not physical slot number).ro Integer32 .1.3.6.1.4.1.4981.1.10.1.1 |
rdnSlotTypeFunctional type of this slot.ro Enumeration .1.3.6.1.4.1.4981.1.10.1.2 |
rdnSlotNumberSlot number relative to the containing card or
chassis, or -1 if neither applicable nor
determinable.ro Integer32 .1.3.6.1.4.1.4981.1.10.1.3 |
rdnSlotOperStatusThe operational status of the card.
cardOperStatus is up when a card is
recognized by the device and is enabled for
operation. cardOperStatus is down if the
card is not recognized by the device, or if
it is not enabled for operation.
cardOperStatus is standby if the card is
enabled and acting as a standby slavero Enumeration .1.3.6.1.4.1.4981.1.10.1.4 |
rdnOfflineModemCountNumber of offline modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.5 |
rdnOnlineModemCountNumber of online modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.6 |
rdnActiveModemCountNumber of active modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.7 |
rdnRegisteredModemCountNumber of registered modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.8 |
rdnProvisionedModemCountNumber of provisioned modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.9 |
rdnUnregisteredModemCountNumber of registered modems for this slotro Integer32 .1.3.6.1.4.1.4981.1.10.1.10 |
rdnResetSlotStatsThe byte and packet counters for all the cable
modems for the given slot is reset by a 'set'
to this object. Only the value of 'clear(1)'
is allowed. On a get operation, it returns '0'rw Enumeration .1.3.6.1.4.1.4981.1.10.1.11 |
rdnCardIfIndexTableChassis card table. SEQUENCE OF RdnCardIfIndexEntry .1.3.6.1.4.1.4981.1.11 |
rdnCardIfIndexEntryChassis card table. RdnCardIfIndexEntry .1.3.6.1.4.1.4981.1.11.1 |
rdnCardIfIndexmatches RFC1213 ifTable IfIndexro Integer32 .1.3.6.1.4.1.4981.1.11.1.1 |
rdnCardIfSlotNumberChassis slot number, or -1 if neither
applicable nor determinable.ro Integer32 .1.3.6.1.4.1.4981.1.11.1.2 |
rdnCardIfPortNumberChassis port number, unique per port on a
given card if available.ro Integer32 .1.3.6.1.4.1.4981.1.11.1.3 |
rdnCardIfCardIndexcardIndex of the card in the Chassis cardTable
which contains this interface.ro Integer32 .1.3.6.1.4.1.4981.1.11.1.4 |
rdnCardIfConnectorTypeEnabledInterface connector type currently enabled.
Value will be 1 if not known or not used,
or 2 if none of this ports' interface
connectors are enabled.ro Enumeration .1.3.6.1.4.1.4981.1.11.1.5 |
rdnSysUpTimeAtLastChassisChangeTime in seconds/100 from the last cold
start to the last change in the chassis'
configuration. This value will be updated
whenever the chassis experiences a change
in the count, type, or slot position of
a card in cardTable.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4981.1.12 |
rdnSysUpTimeAtLastConfigChangeTime in seconds/100 from the last
configuration change in the system. This
value will be updated whenever the system
experiences a change in the configuration.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.4981.1.13 |
More MIBs from Riverdelta
Browse all RiverdeltaMIBs →The RDN-PKTCABLE-GROUP-MIB provides management interfaces for Motorola PacketCable multimedia systems, specifically enabling the monitoring of cable modem termination system (CMTS) and media gateway components to track session states, voice quality parameters, and packet transport metrics defined by the PacketCable architecture.
The RDN-CABLE-SPECTRUM-GROUP-MIB enables MCNS-compliant Cable Modem Termination Systems (CMTS) to monitor and configure spectrum group parameters, including frequency allocations, channel bandwidths, and modulation profiles, for downstream and upstream cable transmission management.
The RDN-EVT-NOTIFICATIONS module monitors critical and higher severity DOCSIS Cable Modem Termination System (CMTS) events by generating SNMP traps containing the calculated Event ID, severity level, and descriptive text. This mechanism enables network management systems to detect and correlate specific vendor-specific subsystem failures or status changes within Motorola-based DOCSIS infrastructure.
SNMP MIB module
The RDN-CABLE-SPECTRUM-MIB enables MCNS-compliant Cable Modem Termination Systems (CMTS) to monitor and manage RF spectrum parameters, including channel power levels, noise floor statistics, and upstream/downstream frequency allocations. This module facilitates the detection of spectral interference and the optimization of cable plant performance by exposing granular spectrum management data points for troubleshooting and capacity planning.
The RDN-CHANNEL-BONDING-MIB enables monitoring and management of Motorola cable modem termination systems and CMTS software to track downstream and upstream channel bonding parameters, including active channel counts, modulation profiles, and signal quality metrics. It facilitates the administration of bonded channel aggregation states and performance statistics essential for maintaining DOCSIS service delivery integrity.