RBN-OPTICAL-TRANSCEIVER-MIB
AI MIB Summary
The RBN-OPTICAL-TRANSCEIVER-MIB enables SNMP-based monitoring of optical transceiver parameters, including optical power levels, temperature, and bias current, specifically for Line Card ports on SSR hardware. This module facilitates real-time fault detection and performance analysis of fiber optic interfaces within the SSR platform.
The MIB used to manage the Optical Transceivers in Line Card ports in SSR
Main OID:
rbnOpticalTransceiver.1.3.6.1.4.1.2352.2.50
48
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
rbnOpticalTransceiverAlarmAn rbnOpticalTransceiverAlarm notification signifies that an alarm has been raised or cleared on a Optical Transceiver NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.49.0.2 |
rbnOpticalTransceiverLaneAlarmAn rbnOpticalTransceiverLaneAlarm notification signifies that an alarm has been raised or cleared in a lane on a Optical Transceiver NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.49.0.3 |
rbnOpticalTransceiverMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.49.2.3 |
rbnOpticalTransceiverMonMIBNotificationGroupA collection of notifications providing Optical Transceiver fault condition Unknown .1.3.6.1.4.1.2352.2.49.2.3.2 |
rbnOpticalTransceiverMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.49.2.4 |
rbnOpticalTransceiverMonMIBComplianceThe compliance statement for the OpticalTransceiver MIB Unknown .1.3.6.1.4.1.2352.2.49.2.4.1 |
rbnOpticalTransceiverThe MIB used to manage the Optical Transceivers in Line Card ports in SSR MODULE-IDENTITY .1.3.6.1.4.1.2352.2.50 |
rbnOpticalTransceiverDetails OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.50.1 |
rbnOpticalTransceiverPortTableThis table contains the ports with optical transceivers and corresponding parameters SEQUENCE OF RbnOpticalTransceiverPortEntry .1.3.6.1.4.1.2352.2.50.1.1 |
rbnOpticalTransceiverPortEntryLine Card port optical transceiver parameter description. RbnOpticalTransceiverPortEntry .1.3.6.1.4.1.2352.2.50.1.1.1 |
rbnOpticalTransceiverCardSlotThe chassis slot number in which the card is present where the Optical Transceiver plugged in.ro RbnSlot (RBN-TC) .1.3.6.1.4.1.2352.2.50.1.1.1.1 |
rbnOpticalTransceiverPortThe port number where the Optical Transceiver plugged in.ro RbnPort (RBN-TC) .1.3.6.1.4.1.2352.2.50.1.1.1.2 |
rbnOpticalTransceiverTypeType and category of Optical Transceiverro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.3 |
rbnOpticalTransceiverMediaTypeOptical Transceiver Media Typero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.4 |
rbnOpticalTransceiverRbnEricssonApprovedIs the Optical Transceiver n this port approved by Ericsson, Yes/No?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.50.1.1.1.5 |
rbnOpticalTransceiverDiagMonitoringIs Optical Transceiver Diag Monitoring On or Off?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.50.1.1.1.6 |
rbnOpticalTransceiverCLEIcodeOptical Transceiver Common Language Equipment Identifier (CLEI) code.ro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.7 |
rbnOpticalTransceiverSerialNoOptical Transceiver serial numberro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.8 |
rbnOpticalTransceiverFrequencyOptical Transceiver Frequencyro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.9 |
rbnOpticalTransceiverWaveLengthOptical Transceiver Wave Lengthro RbnOpticalTransceiverParamWaveLength .1.3.6.1.4.1.2352.2.50.1.1.1.10 |
rbnOpticalTransceiverAdditionalFeaturesOptical Transceiver Additional Features such as, Is Optical Transceiver OTN capable? and/or Is Optical Transceiver Tunable?ro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.11 |
rbnOpticalTransceiverFrequencyStartFrequency Start for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.12 |
rbnOpticalTransceiverFrequencyEndFrequency End for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.13 |
rbnOpticalTransceiverFrequencySpacingFrequency Spacing for tunable optical transceiver. Not applicable if optical transceiver is not tunablero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.14 |
rbnOpticalTransceiverOTNFramerFramer of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capablero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.15 |
rbnOpticalTransceiverOTNFECFEC of OTN if optical transceiver is OTN capable. Not applicable if optical transceiver is not OTN capablero OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.16 |
rbnOpticalTransceiverPowerLevelOptical Transceiver Power Levelro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.1.1.17 |
rbnOpticalTransceiverActiveAlarmCountNumber of alarms active on the Optical Transceiverro INTEGER .1.3.6.1.4.1.2352.2.50.1.1.1.18 |
rbnOpticalTransceiverParamBitMaskThis Bit Mask indicates which values are valid for RbnOpticalTransceiverParamType in rbnOpticalTransceiverParamTable: 0x0001 optical transceiver txpower valid 0x0002 optical transceiver rxpower valid 0x0004 optical transceiver temperature valid 0x0008 optical transceiver laserBiasCurrent valid 0x0010 optical transceiver soaBiasCurrent valid 0x0020 optical transceiver Vcc valid 0x0040 optical transceiver aux1 valid 0x0080 optical transceiver aux2 valid 0x0100 optical transceiver lane txpower valid 0x0200 optical transceiver lane rxpower valid 0x0400 optical transceiver lane temperature valid 0x0800 optical transceiver lane laserBiasCurrent validro Integer32 .1.3.6.1.4.1.2352.2.50.1.1.1.19 |
rbnOpticalTransceiverLaneCountNumber of Lanes in optical transceiverro INTEGER .1.3.6.1.4.1.2352.2.50.1.1.1.20 |
rbnOpticalTransceiverParamTableThis table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters. SEQUENCE OF RbnOpticalTransceiverParamEntry .1.3.6.1.4.1.2352.2.50.1.2 |
rbnOpticalTransceiverParamEntryOpticalTransceiver Parameter Entries in Table RbnOpticalTransceiverParamEntry .1.3.6.1.4.1.2352.2.50.1.2.1 |
rbnOpticalTransceiverParamTypeThis object specifies the optical parameter type that is being monitored in this entry.ro RbnOpticalTransceiverParamType .1.3.6.1.4.1.2352.2.50.1.2.1.1 |
rbnOpticalTransceiverParamDescriptionThis object specifies the optical parameter description including units that is being monitored in this entry.ro OCTET STRING .1.3.6.1.4.1.2352.2.50.1.2.1.2 |
rbnOpticalTransceiverCurrentValueThe current value of tx power, rx power, temperature, bias current and Vccro RbnOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.2.1.3 |
rbnOpticalTransceiverMaxAlarmValueThe alarm high threshold value of tx power, rx power, temperature, bias current and Vccro RbnOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.2.1.4 |
rbnOpticalTransceiverMaxWarningValueThe warning high threshold value of tx power, rx power, temperature, bias current and Vccro RbnOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.2.1.5 |
rbnOpticalTransceiverMinAlarmValueThe alarm low threshold value of tx power, rx power, temperature, bias current and Vccro RbnOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.2.1.6 |
rbnOpticalTransceiverMinWarningValueThe warning low threshold value of tx power, rx power, temperature, bias current and Vccro RbnOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.2.1.7 |
rbnLaneInOpticalTransceiverParamTableThis table provides objects to monitor optical transceiver parameters in a network element. It also provides objects for monitoring high and low warning and alarm threshold on these monitored parameters. SEQUENCE OF RbnLaneInOpticalTransceiverParamEntry .1.3.6.1.4.1.2352.2.50.1.3 |
rbnLaneInOpticalTransceiverParamEntryLaneInOpticalTransceiver Parameter Entries in Table RbnLaneInOpticalTransceiverParamEntry .1.3.6.1.4.1.2352.2.50.1.3.1 |
rbnLaneInOpticalTransceiverThis object specifies the optical transceiver lane that is being monitored in this entry.ro Integer32 .1.3.6.1.4.1.2352.2.50.1.3.1.1 |
rbnLaneInOpticalTransceiverParamTypeThis object specifies the optical parameter type that is being monitored in this entry.ro RbnLaneInOpticalTransceiverParamType .1.3.6.1.4.1.2352.2.50.1.3.1.2 |
rbnLaneInOpticalTransceiverCurrentValueThe current value of tx power, rx power, temperature, bias current and Vccro RbnLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.3.1.3 |
rbnLaneInOpticalTransceiverMaxAlarmValueThe alarm high threshold value of tx power, rx power, temperature, bias current and Vccro RbnLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.3.1.4 |
rbnLaneInOpticalTransceiverMaxWarningValueThe warning high threshold value of tx power, rx power, temperature, bias current and Vccro RbnLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.3.1.5 |
rbnLaneInOpticalTransceiverMinAlarmValueThe alarm low threshold value of tx power, rx power, temperature, bias current and Vccro RbnLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.3.1.6 |
rbnLaneInOpticalTransceiverMinWarningValueThe warning low threshold value of tx power, rx power, temperature, bias current and Vccro RbnLaneInOpticalTransceiverParameterValue .1.3.6.1.4.1.2352.2.50.1.3.1.7 |