RBN-IPPOOL-MIB
Defines the objects necessary to obtain information about IP Pools for interfaces within a context.
Main OID:
rbnIpPoolMib.1.3.6.1.4.1.2352.2.15
92
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
92 total| Object Name |
|---|
rbnIpPoolMibDefines the objects necessary to obtain information about IP Pools for interfaces within a context. MODULE-IDENTITY .1.3.6.1.4.1.2352.2.15 |
rbnIpPoolMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.0 |
rbnIpPoolThresholdMetA notification indicating that the per pool falling threshold has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.1 |
rbnIpPoolContextThresholdMetA notification indicating that the per-context falling threshold has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.2 |
rbnIpPoolContextThresholdPercentageMetA notification indicating that the per-context percentage falling threshold has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.3 |
rbnInetIpPoolHiFallingThrshMetA notification indicating that the falling threshold with the high water mark(rbnInetIpPoolHiFallingThrsh) per IP Pool has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.4 |
rbnInetIpPoolLoFallingThrshMetA notification indicating that the falling threshold with the low water mark(rbnInetIpPoolLoFallingThrsh) per IP Pool has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.5 |
rbnInetIpPoolCtxHiFallingThrshMetA notification indicating that the falling threshold with the high water mark(rbnInetIpPoolCtxHiFallingThrsh) per IP Pool has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.6 |
rbnInetIpPoolCtxLoFallingThrshMetA notification indicating that the falling threshold with the low water mark(rbnInetIpPoolCtxLoFallingThrsh) per IP Pool has been reached. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.15.0.7 |
rbnIpPoolMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.1 |
rbnIpPoolTableThe purpose of this table is to allow customers to monitor the status of IP Pools on their SMS systems through SNMP. This table contains the objects which identify information about IP Pools. Each row in the table corresponds to one IP Pool for a given interface within a particular context. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). SEQUENCE OF RbnIpPoolEntry .1.3.6.1.4.1.2352.2.15.1.1 |
rbnIpPoolEntryA conceptual row in the rbnIpPoolTable. RbnIpPoolEntry .1.3.6.1.4.1.2352.2.15.1.1.1 |
rbnIpPoolInterfaceIdxThe index of the interface containing the IP Pool. Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.1 |
rbnIpPoolAddrThe start address of the IP Pool. IpAddress .1.3.6.1.4.1.2352.2.15.1.1.1.2 |
rbnIpPoolInterfaceNameThe name of the interface containing the IP Pool.ro SnmpAdminString .1.3.6.1.4.1.2352.2.15.1.1.1.3 |
rbnIpPoolMaskThe subnet mask of the IP Pool. This object will be instantiated for IP Pools of type subnet only.ro IpAddress .1.3.6.1.4.1.2352.2.15.1.1.1.4 |
rbnIpPoolSizeThe size of the IP Pool is defined to be the sum of the available addresses plus the unusable addresses.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.5 |
rbnIpPoolAvailableThe number of addresses of an IP Pool that are available.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.6 |
rbnIpPoolUnusableUnusable IP addresses in an IP Pool consist of the ip address of the interface, and those used by the network address and the broadcast address of the interface.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.7 |
rbnIpPoolInuseThe number of addresses of an IP Pool that are in use.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.8 |
rbnIpPoolThresholdThe threshold of an IP Pool is the value for currently available addresses, as reported in rbnIpPoolAvailable, which causes a trap and/or log message to be generated when this value is reached. This is a falling threshold, so a trap and/or log message will only be sent on a transition of the value of available addresss from (rbnIpPoolThreshold+1) addresses to rbnIpPoolThreshold addresses. Additionally, the action of sending the trap and/or log message is subject to the values of rbnIpPoolSendTrap and rbnIpPoolLogMessage. A value of zero means there is no threshold.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.1.1.9 |
rbnIpPoolSendTrapIf true, upon detection of reaching a per-pool threshold event, a trap will be sent. See the definition of the rbnIpPoolThresholdMet for the information included in the trap. Note, both rbnIpPoolSendTrap and rbnIpPoolLogMessage are allowed to be TRUE at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.1.1.10 |
rbnIpPoolLogMessageIf true, upon detection of reaching a per-pool threshold event, a message will be logged. The information contained in the message is the same as that included in the rbnIpPoolThresholdMet trap. Note, both rbnIpPoolSendTrap and rbnIpPoolLogMessage are allowed to be TRUE at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.1.1.11 |
rbnIpPoolNameThe name of the IP Pool.ro SnmpAdminString .1.3.6.1.4.1.2352.2.15.1.1.1.12 |
rbnIpPoolTypeThe type of the IP Pool.ro Enumeration .1.3.6.1.4.1.2352.2.15.1.1.1.13 |
rbnIpPoolEndAddrThe end address of the IP Pool. This object will be instantiated for range IP Pools only.ro IpAddress .1.3.6.1.4.1.2352.2.15.1.1.1.14 |
rbnIpPoolSummary OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.1.2 |
rbnIpPoolContextNameThe name of the context containing the IP Pool.ro SnmpAdminString .1.3.6.1.4.1.2352.2.15.1.2.1 |
rbnIpPoolContextAvailableThe total number of IP addresses available in all pools of all interfaces in the context valid in the current view.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.2.2 |
rbnIpPoolContextThresholdThe per-context threshold of an IP Pool is the value for currently available per-context addresses, as reported in rbnIpPoolContextAvailable, which causes a trap and/or log message to be generated when this value is reached. This is a falling threshold, so a trap and/or log message will only be sent on a transition of the value of available addresss from (rbnIpPoolContextThreshold+1) addresses to rbnIpPoolContextThreshold addresses. Additionally, the action of sending the trap and/or log message is subject to the values of rbnIpPoolContextSendTrap and rbnIpPoolContextLogMessage. A value of zero means there is no per-context threshold.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.2.3 |
rbnIpPoolContextSendTrapIf true, upon detection of a per-context threshold crossing event, a trap will be sent. See the definition of the rbnIpPoolContextThresholdMet for the information included in the trap. Note, both rbnIpPoolContextSendTrap and rbnIpPoolContextLogMessage are allowed to be true at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.2.4 |
rbnIpPoolContextLogMessageIf true, upon detection of a per-context threshold crossing event, a message will be logged. The information contained in the message logged is the same as that included in the rbnIpPoolContextThresholdMet trap. Note, both rbnIpPoolContextSendTrap and rbnIpPoolContextLogMessage are allowed to be true at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.2.5 |
rbnIpPoolContextTotalSizeThe total number of IP addresses configured in all pools of all interfaces in the context valid in the current view. It is the sum of the available addresses plus the unusable addresses.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.2.6 |
rbnIpPoolContextThresholdPercentTableThe purpose of this table is to allow customers to monitor the status of per-context IP Pool percentage thresholds through SNMP. This table contains the objects which identify information about per-context IP Pool thresholds expressed in percentage. Each row in the table corresponds to one IP Pool percentage threshold configured within a particular context. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). SEQUENCE OF RbnIpPoolContextThresholdPercentEntry .1.3.6.1.4.1.2352.2.15.1.2.7 |
rbnIpPoolContextThresholdPercentEntryA conceptual row in the rbnIpPoolContextThresholdPercentTable. RbnIpPoolContextThresholdPercentEntry .1.3.6.1.4.1.2352.2.15.1.2.7.1 |
rbnIpPoolContextThresholdIndexThe index of the IP Pool percentage threshold. Unsigned32 .1.3.6.1.4.1.2352.2.15.1.2.7.1.1 |
rbnIpPoolContextThresholdPercentageA threshold for the percentage of the number of currently available IP Pool addresses against the total number of IP Pool addresses configured within the context. This is a falling threshold, so an SNMP trap and/or log message will only be sent when the current value, which is the % of rbnIpPoolContextAvailable/rbnIpPoolContextTotalSize truncated to a whole number in percentage, is less than or equal to this threshold, and the percentage value at the last check was greater than this threshold. Additionally, the action of sending the SNMP trap and/or logging a message is subject to the values of rbnIpPoolContextThresholdSendTrap and rbnIpPoolContextThresholdLogMessage.ro RbnPercentage (RBN-TC) .1.3.6.1.4.1.2352.2.15.1.2.7.1.2 |
rbnIpPoolContextThresholdSendTrapIf true, upon detection of a per-context threshold crossing event, an SNMP trap will be sent. See the definition of the rbnIpPoolContextThresholdPercentageMet for the information included in the trap. Note, both rbnIpPoolContextThresholdSendTrap and rbnIpPoolContextThresholdLogMessage are allowed to be true at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.2.7.1.3 |
rbnIpPoolContextThresholdLogMessageIf true, upon detection of a per-context threshold crossing event, a message will be logged. The information contained in the message logged is the same as that included in the rbnIpPoolContextThresholdPercentageMet trap. Note, both rbnIpPoolContextThresholdSendTrap and rbnIpPoolContextThresholdLogMessage are allowed to be true at the same time.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.15.1.2.7.1.4 |
rbnInetIpPoolTableThis table contains the objects which identify information about IP Pools (such as ND IPv6 pool and DHCP-PD IPv6 Pool). Each row in the table corresponds to one IP Pool for either a given interface within a particular context or only within a particular context . If this pool is only configured per context basis, the interface index is set to zero. The IPv6 pool range is from start prefix/length to the end prefix/length. The prefix length for start and end prefixes are the same, and refer to the prefix length to be advertised or delegated. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). SEQUENCE OF RbnInetIpPoolEntry .1.3.6.1.4.1.2352.2.15.1.3 |
rbnInetIpPoolEntryA conceptual row in the rbnInetIpPoolTable. RbnInetIpPoolEntry .1.3.6.1.4.1.2352.2.15.1.3.1 |
rbnInetIpPoolTypeThe type of IP Pool. RbnInetPoolType .1.3.6.1.4.1.2352.2.15.1.3.1.1 |
rbnInetIpPoolIfIndexThe index of the interface containing the IP Pool. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.2 |
rbnInetIpPoolStartPrefixTypeThe address type of rbnInetIpPoolPrefix. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.3 |
rbnInetIpPoolStartPrefixThe start address prefix of this pool. The address type of this object is specified in rbnInetIpPoolPrefixType. The length of this object is the standard length for objects of that type (always 16 bytes). Any bits after rbnInetIpPoolStartPrefixLen must be zero. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.4 |
rbnInetIpPoolStartPrefixLenThe prefix length associated with this prefix. It refers to advertised or delegated prefix length. InetAddressPrefixLength .1.3.6.1.4.1.2352.2.15.1.3.1.5 |
rbnInetIpPoolEndPrefixTypeThe address type of rbnInetIpPoolPrefix. The value of this object is always ipv6 (2).ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.6 |
rbnInetIpPoolEndPrefixThe end IP address prefix of this pool. The address type of this object is specified in rbnInetIpPoolPrefixType. Any bits after rbnInetIpPoolPrefixLen must be zero.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.7 |
rbnInetIpPoolEndPrefixLenThe IP prefix length associated with this prefix. It refers to the advertised or delegated prefix length. See rbnInetIpPoolEndPrefixLen.ro InetAddressPrefixLength .1.3.6.1.4.1.2352.2.15.1.3.1.8 |
rbnInetIpPoolInterfaceNameThe name of the interface containing the IP Pool.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.9 |
rbnInetIpPoolNameThe name of the IP Pool.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.15.1.3.1.10 |
rbnInetIpPoolSizeThe size of the IP Pool is defined to be the sum of the available prefixes plus the unusable prefixes.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.3.1.11 |
rbnInetIpPoolAvailableThe number of IP address prefixes of an IP Pool that are available.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.3.1.12 |
rbnInetIpPoolUnusableUnusable IP prefixes in an IP Pool.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.3.1.13 |
rbnInetIpPoolInuseThe number of IP prefixes of an IP Pool that are in use.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.3.1.14 |
rbnInetIpPoolThrshTypeThis object indicates the value type of all threshold values in this logical row, including rbnInetIpPoolHiFallingThrsh, rbnInetIpPoolLoFallingThrsh.ro RbnInetIpPoolThresholdType .1.3.6.1.4.1.2352.2.15.1.3.1.15 |
rbnInetIpPoolHiFallingThrshThe falling threshold of an IP Pool. When the value of rbnInetIpPoolAvailable crosses from (rbnInetIpPoolHiFallingThrsh + 1) to rbnInetIpPoolHiFallingThrsh in either absolute value or percentage specified by rbnInetIpPoolThrshType, a rbnInetIpPoolHiFallingThrshMet notification and/or log is generated. The value of this object should never be smaller than the value of rbnInetIpPoolLoFallingThrsh. A value of zero means that this falling threshold is not configured.ro RbnInetIpPoolThreshold .1.3.6.1.4.1.2352.2.15.1.3.1.16 |
rbnInetIpPoolHiFallingNotifyThis object specifies if rbnInetIpPoolHiFallingThrshMet and/or log is generated. See the description of rbnInetIpPoolHiFallingThrsh for conditions which generate the notification.ro RbnInetIpPoolThrshNotify .1.3.6.1.4.1.2352.2.15.1.3.1.17 |
rbnInetIpPoolLoFallingThrshThe falling threshold of an IP Pool. When the value of rbnInetIpPoolAvailable crosses from (rbnInetIpPoolLoFallingThrsh + 1) to rbnInetIpPoolLoFallingThrsh (either absolute value or percentage) specified by rbnInetIpPoolThrshType, a rbnInetIpPoolLoFallingThrshMet notification and/or log is generated. The value of this object should never be greater than the value of rbnInetIpPoolHiFallingThrsh. A value of zero means that this falling threshold is not configured.ro RbnInetIpPoolThreshold .1.3.6.1.4.1.2352.2.15.1.3.1.18 |
rbnInetIpPoolLoFallingNotifyThis object specifies if rbnInetIpPoolLoFallingThrshMet and/or log is generated. See the description of rbnInetIpPoolLoFallingThrsh for conditions which generate the notification.ro RbnInetIpPoolThrshNotify .1.3.6.1.4.1.2352.2.15.1.3.1.19 |
rbnInetIpPoolSummary OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.1.4 |
rbnInetIpPoolCtxNameThe name of the context containing the IP Pool.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.15.1.4.1 |
rbnInetIpPoolCtxTableThe purpose of this table is to allow customers to monitor the status of IP Pool context summary and thresholds through SNMP. This table contains the objects which identify information about per-context IP Pool thresholds expressed in absolute value or percentage. Each row in the table corresponds to one IP Pool threshold configured within a particular context. Objects defined in this table are only accessible within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). SEQUENCE OF RbnInetIpPoolCtxEntry .1.3.6.1.4.1.2352.2.15.1.4.2 |
rbnInetIpPoolCtxEntryA conceptual row in the rbnInetIpPoolCtxTable. RbnInetIpPoolCtxEntry .1.3.6.1.4.1.2352.2.15.1.4.2.1 |
rbnInetIpPoolCtxPoolTypeThe type of ip pool. RbnInetPoolType .1.3.6.1.4.1.2352.2.15.1.4.2.1.1 |
rbnInetIpPoolCtxAvailableThe number of IP address prefixes of an IP Pool that are available.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.4.2.1.2 |
rbnInetIpPoolCtxPoolSizeThe total number of IP prefixes configured in all pools of all interfaces in the context valid in the current view. It is the sum of the available plus the unusable prefixes.ro Unsigned32 .1.3.6.1.4.1.2352.2.15.1.4.2.1.3 |
rbnInetIpPoolCtxThrshTypeThis object indicates the value type of all threshold values in this logical row, including rbnInetIpPoolCtxHiFallingThrsh, rbnInetIpPoolCtxLoFallingThrsh.ro RbnInetIpPoolThresholdType .1.3.6.1.4.1.2352.2.15.1.4.2.1.4 |
rbnInetIpPoolCtxHiFallingThrshThe falling threshold of an IP Pool. When the value of rbnInetIpPoolCtxAvailable crosses from (rbnInetIpPoolCtxHiFallingThrsh + 1) to rbnInetIpPoolCtxHiFallingThrsh in either absolute value or percentage specified by rbnInetIpPoolCtxThrshType, a rbnInetIpPoolCtxHiFallingThrshMet notification and/or log is generated. The value of this object should never be smaller than the value of rbnInetIpPoolCtxLoFallingThrsh. A value of zero means that this falling threshold is not configured.ro RbnInetIpPoolThreshold .1.3.6.1.4.1.2352.2.15.1.4.2.1.5 |
rbnInetIpPoolCtxHiFallingNotifyThis object specifies if rbnInetIpPoolCtxHiFallingThrshMet and/or log is generated. See the description of rbnInetIpPoolCtxHiFallingThrsh for conditions which generate the notification.ro RbnInetIpPoolThrshNotify .1.3.6.1.4.1.2352.2.15.1.4.2.1.6 |
rbnInetIpPoolCtxLoFallingThrshThe falling threshold of an IP Pool. When the value of rbnInetIpPoolCtxAvailable crosses from (rbnInetIpPoolCtxLoFallingThrsh + 1) to rbnInetIpPoolCtxLoFallingThrsh (either absolute value or percentage) specified by rbnInetIpPoolCtxThrshType, a rbnInetIpPoolCtxLoFallingThrshMet notification and/or log is generated. The value of this object should never be greater than the value of rbnInetIpPoolCtxHiFallingThrsh. A value of zero means that this falling threshold is not configured.ro RbnInetIpPoolThreshold .1.3.6.1.4.1.2352.2.15.1.4.2.1.7 |
rbnInetIpPoolCtxLoFallingNotifyThis object specifies if rbnInetIpPoolCtxLoFallingThrshMet and/or log is generated. See the description of rbnInetIpPoolCtxLoFallingThrsh for conditions which generate the notification.ro RbnInetIpPoolThrshNotify .1.3.6.1.4.1.2352.2.15.1.4.2.1.8 |
rbnIpPoolMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.2 |
rbnIpPoolCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.2.1 |
rbnIpPoolComplianceThe compliance statement for SNMP entities which implement the Redback IP Pool MIB. Unknown .1.3.6.1.4.1.2352.2.15.2.1.1 |
rbnIpPoolNameComplianceThe compliance statement for SNMP entities which implement the Redback IP Pool MIB, including support for named pools. Unknown .1.3.6.1.4.1.2352.2.15.2.1.2 |
rbnIpPoolComplianceV2The compliance statement for SNMP entities which implement the Redback IP Pool MIB. Unknown .1.3.6.1.4.1.2352.2.15.2.1.3 |
rbnIpPoolNameComplianceV2The compliance statement for SNMP entities which implement the Redback IP Pool MIB, including support for named pools. Unknown .1.3.6.1.4.1.2352.2.15.2.1.4 |
rbnIpPoolRangeComplianceThe compliance statement for SNMP entities which implement the Redback IP Pool MIB, including support for range ip pools. Unknown .1.3.6.1.4.1.2352.2.15.2.1.5 |
rbnIpPoolThresholdPercentComplianceThe compliance statement for SNMP entities which implement the Redback IP Pool MIB, including support for per-context KIP Pool percentage thresholds. Unknown .1.3.6.1.4.1.2352.2.15.2.1.6 |
rbnInetIpPoolComplianceThe compliance statement for SNMP entities which implement the IP Pool MIB, including support DHCP-PD & ND IPv6 Pool. Unknown .1.3.6.1.4.1.2352.2.15.2.1.7 |
rbnIpPoolGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.15.2.2 |
rbnIpPoolGroupThe collection of objects providing interface IP Pool information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.1 |
rbnIpPoolNotifyGroupThe collection of notifications related to IP Pools. Unknown .1.3.6.1.4.1.2352.2.15.2.2.2 |
rbnIpPoolNameGroupAn object providing the IP pool name. Unknown .1.3.6.1.4.1.2352.2.15.2.2.3 |
rbnIpPoolGroupV2The collection of objects providing interface IP Pool information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.4 |
rbnIpPoolRangeGroupAn object providing an IP pool range information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.5 |
rbnIpPoolInterfaceGroupThe collection of objects providing interface IP Pool information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.6 |
rbnIpPoolContextGroupThe collection of objects providing context IP Pool information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.7 |
rbnIpPoolNotifyGroupV2The collection of notifications related to IP Pools. Unknown .1.3.6.1.4.1.2352.2.15.2.2.8 |
rbnInetIpPoolGroupThe collection of objects providing context IP Pool information. Unknown .1.3.6.1.4.1.2352.2.15.2.2.9 |
rbnInetIpPoolNotifyGroupThe collection of notifications related to IP Pools. Unknown .1.3.6.1.4.1.2352.2.15.2.2.10 |