RBN-SUBSCRIBER-ACTIVE-MIB
AI MIB Summary
The RBN-SUBSCRIBER-ACTIVE-MIB enables SNMP-based monitoring of active subscriber session states and context counts specifically for Redback Networks broadband remote access servers. It exposes per-context subscriber metrics and aggregate session counts to facilitate real-time capacity planning and fault isolation within the Redback product family.
Defines the objects necessary to support the management of active subscribers in Redback product family. All mib objects, except rbnSubsCntxtCountTable, defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
Main OID:
rbnSubscriberActiveMib.1.3.6.1.4.1.2352.2.27
136
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
rbnSubscriberActiveMibDefines the objects necessary to support the management of active subscribers in Redback product family. All mib objects, except rbnSubsCntxtCountTable, defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). MODULE-IDENTITY .1.3.6.1.4.1.2352.2.27 |
rbnSubsActiveObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1 |
rbnSubsActive OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1.1 |
rbnSubsActiveTableThis table contains subscriber sessions which have been authenticated on an circuit. SEQUENCE OF RbnSubsActiveEntry .1.3.6.1.4.1.2352.2.27.1.1.1 |
rbnSubsActiveEntryA conceptual row in the rbnSubsActiveTable. RbnSubsActiveEntry .1.3.6.1.4.1.2352.2.27.1.1.1.1 |
rbnSubsActiveNameThe name identifying this entry. An entry configured by other means may have been given a name whose length is greater than 80. Names which exceed this length are not accessible via SNMP operations. SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.1.1.1 |
rbnSubsActiveSessionIdA value that uniquely identifies an active subscriber session. If RADIUS is being used to configure/authenticate subscribers, this value will appear in the RADIUS Acct-Session-Id attribute. SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.1.1.2 |
rbnSubsActiveCircuitDescrA string which provides identifying information (e.g slot/port) of the circuit the subscriber is using.ro SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.1.1.3 |
rbnSubsActiveCircuitHandleA value for identifying circuits.ro RbnCircuitHandle (RBN-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.4 |
rbnSubsActiveStartTimeThe time when the subscriber became active.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.5 |
rbnSubsActiveClearSetting this value to 'true' will clear the active subscriber session. In the case of PPP, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 encapsulated circuits the session is brought down and then back up and an attempt is made to re-authenticate the subscriber. An SNMP get operation always returns 'false'rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.6 |
rbnSubsActiveResendSetting this value to 'true' will cause a resend of the Radius acct-start packet. An SNMP get operation always returns 'false'rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.7 |
rbnSubsActiveNasPortTypeThe RADIUS attribute NAS-Port-Type which indicates the type of the physical port which is authenticating the user.ro Unsigned32 .1.3.6.1.4.1.2352.2.27.1.1.1.1.8 |
rbnSubsActiveMediumTypeThe medium type of the NAS-Port.ro RbnPortMediumType (RBN-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.9 |
rbnSubsActiveResendSvcAcctSetting this value to 'true' will cause a resend of the Radius acct-start packet for all services associated with the active subscriber session. An SNMP get operation always returns 'false'rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.1.1.10 |
rbnSubsActiveIpTableThis table contains IP addresses used by active subscribers. SEQUENCE OF RbnSubsActiveIpEntry .1.3.6.1.4.1.2352.2.27.1.1.2 |
rbnSubsActiveIpEntryA conceptual row in the rbnSubsActiveIpTable. RbnSubsActiveIpEntry .1.3.6.1.4.1.2352.2.27.1.1.2.1 |
rbnSubsActiveAddrTypeThe address type of rbnSubsActiveAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.27.1.1.2.1.1 |
rbnSubsActiveAddrThe host IP address of the active subscriber.ro InetAddress .1.3.6.1.4.1.2352.2.27.1.1.2.1.2 |
rbnSubsClear OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1.1.3 |
rbnSubsClearSubscriberNameSetting this object to the subscriber name will clear all the sessions associated with the subscriber. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.1 |
rbnSubsClearSessionIdA set of this object will clear the subscriber session identified by this value. In the case of PPP circuit, the PPP state machinery attempts to renegotiate and re-authenticate a new session with the remote peer on the circuit. In the case of RFC 1483 and RFC 1490 encapsulated circuits the circuit is brought down and then back up and an attempt is made to re-authenticate the subscriber bound to the circuit. This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.2 |
rbnSubsBounceNameEach circuit using CLIPS encapsulation used by the named subscriber is brought down and immediately recreated using the RADIUS Access- Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.3 |
rbnSubsBounceSessionIdThe circuit using CLIPS encapsulation identified by the RADIUS Acct-Session-Id is brought down and immediately recreated using the RADIUS Access-Accept attributes. Any other circuit encapsulation type is cleared. This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.4 |
rbnSubsReauthRadiusIndexAn unsigned integer identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. An get of this attribute returns 0.rw Unsigned32 .1.3.6.1.4.1.2352.2.27.1.1.3.5 |
rbnSubsReauthRadiusIDAn octet string identifying a set of subscribers defined at the RADIUS server which are to be re-authorized. The source of this value and the set of subscribers to be re-authorized are defined outside the context of this mib module. This object returns a zero-length string when queried.rw OCTET STRING .1.3.6.1.4.1.2352.2.27.1.1.3.6 |
rbnSubsReauthNameUsed to reauthorize all of the active sessions associated with the given subscriber in the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.7 |
rbnSubsReauthSessionIdUsed to reauthorize the active session identified by the value of this object and the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). This object returns a zero-length string when queried.rw SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.3.8 |
rbnSubsClearReasonAn unsigned integer value which may be included in the set request for rbnSubsClearSubscriberName, rbnSubsClearSessionId, rbnSubsBounceName, rbnSubsBounceSessionId, or any other objects define under the rbnSubsClear OID node. The use of this object value is implementation dependent. This object returns 0 when queried.rw Unsigned32 .1.3.6.1.4.1.2352.2.27.1.1.3.9 |
rbnSubsServiceVolumeTableThis table specifies service volume information on the subscriber circuits. It contains the volume octet counts for each active subscriber session for which the service is active. All MIB objects defined in the table are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3). SEQUENCE OF RbnSubsServiceVolumeEntry .1.3.6.1.4.1.2352.2.27.1.1.4 |
rbnSubsServiceVolumeEntryA conceptual row in the RbnSubsServiceVolumeTable. Each row contains the service volume limit and volume octet count for each active service session. RbnSubsServiceVolumeEntry .1.3.6.1.4.1.2352.2.27.1.1.4.1 |
rbnSubsServiceVolumeLimitInThe volume limit in kilobytes (KB) allowed for the subscriber service to input (or receive) for this subscriber. If the value is 0, then there is no limit.rw Unsigned32 UNITS "KiloBytes" .1.3.6.1.4.1.2352.2.27.1.1.4.1.1 |
rbnSubsServiceVolumeLimitOutThe volume limit in kilobytes (KB) allowed for the subscriber service to output (or transmit) for this subscriber. If the value is 0, then there is no limit.rw Unsigned32 UNITS "KiloBytes" .1.3.6.1.4.1.2352.2.27.1.1.4.1.2 |
rbnSubsServiceActiveTimeThe value of sysUpTime when the service became active for this subscriber. If sysUpTime is reset to zero as a result of a reinitialization of the network management (sub)system, then the values of all TimeStamp objects are also reset.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.4.1.3 |
rbnSubsServiceVolumeOctetsInThe subscriber session volume octets in count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.4 |
rbnSubsServiceVolumeOctetsOutThe subscriber session volume octets out count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.5 |
rbnSubsServiceVolumePktsInThe subscriber session volume packet in count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.6 |
rbnSubsServiceVolumePktsOutThe subscriber session volume packet out count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.7 |
rbnSubsServiceIPv4VolumeOctetsInThe subscriber session volume IPv4 octets in count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.8 |
rbnSubsServiceIPv4VolumeOctetsOutThe subscriber session volume IPv4 octets out count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.9 |
rbnSubsServiceIPv6VolumeOctetsInThe subscriber session volume IPv6 octets in count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.10 |
rbnSubsServiceIPv6VolumeOctetsOutThe subscriber session volume IPv6 octets out count.ro Counter64 UNITS "Octets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.11 |
rbnSubsServiceIPv4VolumePktsInThe subscriber session volume IPv4 packet in count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.12 |
rbnSubsServiceIPv4VolumePktsOutThe subscriber session volume IPv4 packet out count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.13 |
rbnSubsServiceIPv6VolumePktsInThe subscriber session volume IPv6 packet in count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.14 |
rbnSubsServiceIPv6VolumePktsOutThe subscriber session volume IPv6 packet out count.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.1.4.1.15 |
rbnSubsServicesTableThis table contains services available to subscribers. SEQUENCE OF RbnSubsServicesEntry .1.3.6.1.4.1.2352.2.27.1.1.5 |
rbnSubsServicesEntryA conceptual row in the rbnSubsServicesTable. RbnSubsServicesEntry .1.3.6.1.4.1.2352.2.27.1.1.5.1 |
rbnSubsServiceIndexA unique index assigned to the entry. Integer32 .1.3.6.1.4.1.2352.2.27.1.1.5.1.1 |
rbnSubsServiceNameThe name identifying the service.ro SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.5.1.2 |
rbnSubsServiceTagA tag associated with the service name which may provide additional qualification to the name.ro SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.5.1.3 |
rbnSubsActiveSessionTableThis table contains active subscriber sessions which have been authenticated on an circuit. SEQUENCE OF RbnSubsActiveSessionEntry .1.3.6.1.4.1.2352.2.27.1.1.6 |
rbnSubsActiveSessionEntryA conceptual row in the rbnSubsActiveSessionTable. RbnSubsActiveSessionEntry .1.3.6.1.4.1.2352.2.27.1.1.6.1 |
rbnSubsActiveSessionSubscriberNameThe subscriber name associated with this session.ro SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.1.6.1.1 |
rbnSubsActiveSessionPointerA pointer to the row in rbnSubsActiveTable to which this session belongs. May be {0 0} if there is no such row.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.1.6.1.2 |
rbnSubsActiveIpAddrTableThis table contains IPv4/IPv6 addresses used by active subscriber sessions. SEQUENCE OF RbnSubsActiveIpAddrEntry .1.3.6.1.4.1.2352.2.27.1.1.7 |
rbnSubsActiveIpAddrEntryA conceptual row in the rbnSubsActiveIpAddrTable. RbnSubsActiveIpAddrEntry .1.3.6.1.4.1.2352.2.27.1.1.7.1 |
rbnSubsActiveIpAddrTypeThe address type of rbnSubsActiveIpAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.27.1.1.7.1.1 |
rbnSubsActiveIpAddrThe address prefix. The address type of this object is specified in rbnSubsActiveIpAddrType. The length of this object is the standard length for objects of that type (4 or 16 bytes). Any bits after rbnSubsActiveIpPfxLen must be zero.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.27.1.1.7.1.2 |
rbnSubsActiveIpPfxLenThe prefix length associated with this prefix. For IPv4 active subscriber session, the prefix length is always 32.ro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.27.1.1.7.1.3 |
rbnSubsActiveIpAddrDescrHuman readable textual format of IP address.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.27.1.1.7.1.4 |
rbnSubsStats OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1.2 |
rbnSubsCntxtCountTableThis table contains counts of active subscribers by context name. Unlike any of the other tables in this mib module, all rows in this table are accessible when the context 'local' is specified in the snmp message, unless restricted by entries in the vacmAccessTable. Snmp requests using other contexts shall return only the row which matches the context. SEQUENCE OF RbnSubsCntxtCountEntry .1.3.6.1.4.1.2352.2.27.1.2.1 |
rbnSubsCntxtCountEntryThe conceptual row containing the count of active subscribers for each context. RbnSubsCntxtCountEntry .1.3.6.1.4.1.2352.2.27.1.2.1.1 |
rbnSubsCntxtCountThe count of active subscribers with either IPv4 or IPv6 or both stack UP.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.1.1.1 |
rbnSubsCntxtIp4OnlyCountThe count of IPv4 active subscribers which are authorized for only IPv4 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.1.1.2 |
rbnSubsCntxtIp6OnlyCountThe count of IPv6 active subscribers which are authorized for only IPv6 protocol stack. This counter does not include subscribers authorized for dual IPv4/IPv6 protocol stack.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.1.1.3 |
rbnSubsCntxtDualCountThe count of active subscribers which are authorized for both IPv4 and IPv6 for the context. At any time either one or both stacks may be UP.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.1.1.4 |
rbnSubsCntxtLacCountThe count of active LAC subscribers.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.1.1.5 |
rbnSubsEncapsCountTableThis table contains counts of active subscribers by encapsulation type. SEQUENCE OF RbnSubsEncapsCountEntry .1.3.6.1.4.1.2352.2.27.1.2.2 |
rbnSubsEncapsCountEntryA conceptual row in the rbnSubsEncapsCountTable. RbnSubsEncapsCountEntry .1.3.6.1.4.1.2352.2.27.1.2.2.1 |
rbnSubsEncapsulationTypeThis object identifies the type of encapsulation the subscriber is using. Note that 'ppp' includes all types of supported ppp, excluding pppoe. Enumeration .1.3.6.1.4.1.2352.2.27.1.2.2.1.1 |
rbnSubsEncapsCountThe count of active subscribers for the encapsulation type.ro Gauge32 UNITS "subscribers" .1.3.6.1.4.1.2352.2.27.1.2.2.1.2 |
rbnSubsStatsTableThis table contains counters for individual circuits. SEQUENCE OF RbnSubsStatsEntry .1.3.6.1.4.1.2352.2.27.1.2.3 |
rbnSubsStatsEntryA conceptual row in the rbnSubsStatsTable. RbnSubsStatsEntry .1.3.6.1.4.1.2352.2.27.1.2.3.1 |
rbnSubsOctetsSentThe number of octets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.1 |
rbnSubsOctetsReceivedThe number of octets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.2 |
rbnSubsPktsSentThe number of packets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.3 |
rbnSubsPktsReceivedThe number of packets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.4 |
rbnSubsXmitOctetsDroppedThe number of octets dropped by the circuit before transmission.ro Counter32 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.5 |
rbnSubsXmitPktsDroppedThe number of packets dropped by the circuit before transmission.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.6 |
rbnSubsMcastOctetsSentThe number of multicast octets sent by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.7 |
rbnSubsMcastOctetsReceivedThe number of multicast octets received by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.8 |
rbnSubsMcastPktsSentThe number of multicast packets sent by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.9 |
rbnSubsMcastPktsReceivedThe number of multicast packets received by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.10 |
rbnSubsIPv4OctetsSentThe number of IPv4 octets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.11 |
rbnSubsIPv4OctetsReceivedThe number of IPv4 octets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.12 |
rbnSubsIPv6OctetsSentThe number of IPv6 octets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.13 |
rbnSubsIPv6OctetsReceivedThe number of IPv6 octets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.14 |
rbnSubsIPv4PktsSentThe number of IPv4 packets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.15 |
rbnSubsIPv4PktsReceivedThe number of IPv4 packets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.16 |
rbnSubsIPv6PktsSentThe number of IPv6 packets sent by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.17 |
rbnSubsIPv6PktsReceivedThe number of IPv6 packets received by the circuit. This counter includes multicast activity.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.18 |
rbnSubsIPv4McastOctetsSentThe number of IPv4 multicast octets sent by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.19 |
rbnSubsIPv4McastOctetsReceivedThe number of IPv4 multicast octets received by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.20 |
rbnSubsIPv6McastOctetsSentThe number of IPv6 multicast octets sent by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.21 |
rbnSubsIPv6McastOctetsReceivedThe number of IPv6 multicast octets received by the circuit.ro Counter64 UNITS "octets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.22 |
rbnSubsIPv4McastPktsSentThe number of IPv4 multicast packets sent by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.23 |
rbnSubsIPv4McastPktsReceivedThe number of IPv4 multicast packets received by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.24 |
rbnSubsIPv6McastPktsSentThe number of IPv6 multicast packets sent by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.25 |
rbnSubsIPv6McastPktsReceivedThe number of IPv6 multicast packets received by the circuit.ro Counter64 UNITS "packets" .1.3.6.1.4.1.2352.2.27.1.2.3.1.26 |
rbnSubsProfileCountTableThis table contains counts of active subscribers by encapsulation type. SEQUENCE OF RbnSubsProfileCountEntry .1.3.6.1.4.1.2352.2.27.1.2.4 |
rbnSubsProfileCountEntryA conceptual row in the rbnSubsProfileCountTable. RbnSubsProfileCountEntry .1.3.6.1.4.1.2352.2.27.1.2.4.1 |
rbnSubsProfileNameThe profile name which applies to a set of subscribers. SnmpAdminString .1.3.6.1.4.1.2352.2.27.1.2.4.1.1 |
rbnSubsProfileCountThe count of active subscribers for the profile name.ro Gauge32 UNITS "subscribers" .1.3.6.1.4.1.2352.2.27.1.2.4.1.2 |
rbnSubsLicense OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1.2.5 |
rbnSubsMaxSupportedSessionsThe maximum number of active subscriber sessions that are supported on the SmartEdge router.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.5.1 |
rbnSubsLicensedSessionsThe number of licensed subscriber sessions on the SmartEdge router.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.5.2 |
rbnSubsActiveSessionsThe number of active subscriber sessions on the SmartEdge router.ro Gauge32 .1.3.6.1.4.1.2352.2.27.1.2.5.3 |
rbnSubsCapacityPercentageUsedThe percentage of licensed subscriber sessions in use on the SmartEdge router. This value is computed as: if rbnSubsLicensedSessions equals 0 then if rbnSubsActiveSessions equals 0 then 0 else 100 else MIN((rbnSubsActiveSessions * 100)/rbnSubsLicensedSessions), 100).ro RbnPercentage (RBN-TC) .1.3.6.1.4.1.2352.2.27.1.2.5.4 |
rbnSubsNotify OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.1.3 |
rbnSubsNotifyEnableThis object will provide a mechanism for enabling and disabling subscriber notifications. A value of 1 (true) indicates that subscriber notifications are enabled. A value of 2 (false) indicates that subscriber notifications are disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.27.1.3.1 |
rbnSubsConfigErrorMsgsDetailed error messages that describes the mis-configured attributes that failed authentication.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.27.1.3.2 |
rbnSubsActiveConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.2 |
rbnSubsCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.2.1 |
rbnSubsComplianceThe compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance2obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.1.1 |
rbnSubsCompliance2The compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance3obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.1.2 |
rbnSubsCompliance3The compliance statement for SNMP entities which implement the Redback Subscriber MIB. This compliance is replaced by rbnSubsCompliance4.obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.1.3 |
rbnSubsCompliance4The compliance statement for SNMP entities which implement the Redback Subscriber MIB.obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.1.4 |
rbnSubsCompliance5The compliance statement for SNMP entities which implement the Redback Subscriber MIB.obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.1.5 |
rbnSubsCompliance6The compliance statement for SNMP entities which implement the Redback Subscriber MIB. Unknown .1.3.6.1.4.1.2352.2.27.2.1.6 |
rbnSubsGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.2.2 |
rbnSubsActiveGroupThe collection of objects which represent an active subscriber. This group is replaced by rbnSubsActiveGroup2.obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.2.1 |
rbnSubsStatsGroupThe collection of objects which are generic counters of subscriber activity. This group is replaced by rbnSubsStatsGroup2obsolete Unknown .1.3.6.1.4.1.2352.2.27.2.2.2 |
rbnSubsActiveGroup2The collection of objects which represent an active subscriber.deprecated Unknown .1.3.6.1.4.1.2352.2.27.2.2.3 |
rbnSubsStatsGroup2The collection of objects which are generic counters of subscriber activity. Unknown .1.3.6.1.4.1.2352.2.27.2.2.4 |
rbnSubsActiveGroup3The collection of objects which represent an active subscriber. This collection includes the objects rbnSubsActiveNasPortType and rbnSubsActiveMediumType. Unknown .1.3.6.1.4.1.2352.2.27.2.2.5 |
rbnSubsServicesGroupThe collection of objects which represent Service Volume attributes. Unknown .1.3.6.1.4.1.2352.2.27.2.2.6 |
rbnSubsNotifyObjectGroupThe collection of objects related to subscriber notifications. Unknown .1.3.6.1.4.1.2352.2.27.2.2.7 |
rbnSubsNotifyGroupNotification for tracking the failed attributes of subscriber active sessions. Unknown .1.3.6.1.4.1.2352.2.27.2.2.8 |
rbnSubsLicenseGroupThe collection of objects related to subscriber licenses. Unknown .1.3.6.1.4.1.2352.2.27.2.2.9 |
rbnSubsActiveGroup4The collection of objects which represent an active subscriber. This collection includes the objects rbnSubsActiveNasPortType and rbnSubsActiveMediumType. Unknown .1.3.6.1.4.1.2352.2.27.2.2.10 |
rbnSubsStatsGroup3The collection of objects which are generic counters of subscriber activity. Unknown .1.3.6.1.4.1.2352.2.27.2.2.11 |
rbnSubsActiveNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.3 |
rbnSubsNotifyPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.27.3.0 |
rbnSubsConfigErrorEventThis notification signifies that the subscriber session received one or more attribute(s) referring non-existing configuration, and the subscriber session is allowed to stay up. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.27.3.0.1 |