RBN-L2TP-MIB
Defines the objects necessary to monitor L2TP configuration information, counters and the state changes of an L2TP tunnel. All mib objects defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in the v1/v2 or the contextName in v3).
Main OID:
rbnL2tpMib.1.3.6.1.4.1.2352.2.28
142
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
142 total| Object Name |
|---|
rbnL2tpMibDefines the objects necessary to monitor L2TP configuration information, counters and the state changes of an L2TP tunnel. All mib objects defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in the v1/v2 or the contextName in v3). MODULE-IDENTITY .1.3.6.1.4.1.2352.2.28 |
rbnL2tpMibNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.0 |
rbnL2tpMibTunnelStateChangeA rbnL2tpMibTunnelStateChange trap signifies that this particular tunnel has changed state.deprecated NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.28.0.1 |
rbnL2tpMibTunnelStateChange2This notification signifies that the SNMP entity has detected that the operational state of a tunnel has entered or moved from the established state. The current tunnel operational state is indicated by the included value of rbnL2tpMibTunnelState. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.28.0.2 |
rbnL2tpMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.1 |
rbnL2tpPeerCfgTableThe L2TP Peer Information Table. SEQUENCE OF RbnL2tpPeerCfgEntry .1.3.6.1.4.1.2352.2.28.1.1 |
rbnL2tpPeerCfgEntryAn L2TP Peer Information entry. An entry in this table corresponds to the resources assigned to a single peer configuration. This configuration will be inherited by all of the tunnels that are assigned to the peer group. Entries are added to the table once communication is established with the peer. Entries are removed if communication is lost. RbnL2tpPeerCfgEntry .1.3.6.1.4.1.2352.2.28.1.1.1 |
rbnL2tpMibPeerNameThis object identifies the name of the Peer on the local system. This peer is the name of an identifier for a tunnel configuration and each tunnel that is assigned to this peer will take on the peer's configuration parameters. SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.1 |
rbnL2tpPCfgMediaThis object identifies the transport media utilized between communicating peers. A media length of 0 means that no transport media type was set.rw SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.2 |
rbnL2tpPCfgVendorThis object identifies the vendor of L2TP stack running on the remote peer. The length of the string will be zero if no vendor name can be obtained from the peer.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.3 |
rbnL2tpPCfgRevThis object identifies the firmware revision for the L2TP protocol stack running on the remote peer.ro Unsigned32 .1.3.6.1.4.1.2352.2.28.1.1.1.4 |
rbnL2tpPCfgHostNameThis object identifies the name assigned to this peer on the remote host system. A host name length of 0 means that this information could not be obtained from the remote host.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.5 |
rbnL2tpPCfgRadiusThis object indicates whether or not a RADIUS server has been configured for this peer group. A value of true (1) indicates that there is a RADIUS server and it will be used for authenticating and authorizing access to a tunnel in this group and accounting information will be sent to the radius server. A value of false (2) indicates that there is no RADIUS server and authentication and authorization will be done locally.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.1.1.6 |
rbnL2tpPCfgRemIPAddTypeThis object identifies the address type contained in rbnL2tpPCfgRemIPAdd.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.1.1.7 |
rbnL2tpPCfgRemIPAddThis object identifies the remote IP address for this tunnel (utilized only with User Datagram Protocol).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.1.1.8 |
rbnL2tpPCfgStaticThis objects indicates whether the tunnel is static or dynamic. A value of true (1) means that it is static. A value of (2) indicates that it is dynamic.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.1.1.9 |
rbnL2tpPCfgLocalIPAddTypeThis object identifies the address type contained in rbnL2tpPCfgLocalIPAdd.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.1.1.10 |
rbnL2tpPCfgLocalIPAddThis object indicates the local IP address for this tunnel (utilized only with UDP).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.1.1.11 |
rbnL2tpPCfgModeThis object indicates whether the peer is operating as an LNS, a LAC, or both.rw LacLnsType .1.3.6.1.4.1.2352.2.28.1.1.1.12 |
rbnL2tpPCfgMaxTunnelsThis object indicates the maximum number of tunnels that may be configured on this peer.rw Gauge32 .1.3.6.1.4.1.2352.2.28.1.1.1.14 |
rbnL2tpPCfgMaxSesPerTunThis object indicates the maximum number of sessions that may be allocated to one tunnel.rw Gauge32 .1.3.6.1.4.1.2352.2.28.1.1.1.15 |
rbnL2tpPCfgCtlRetranCntThis object indicates a count of the number of times that a control packet was retransmitted.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.1.1.16 |
rbnL2tpPCfgCtlRetranTOThis object indicates the control retransmit timeout in seconds.rw Unsigned32 .1.3.6.1.4.1.2352.2.28.1.1.1.17 |
rbnL2tpPCfgSessAuthThis object indicates the session authentication type.rw AuthType .1.3.6.1.4.1.2352.2.28.1.1.1.18 |
rbnL2tpPCfgCtlWinThis object indicates the control window size.rw Gauge32 .1.3.6.1.4.1.2352.2.28.1.1.1.19 |
rbnL2tpPCfgDNISThis object indicates whether the critera used for a tunnel switch is Dialed Number Identification String first (a value of (1)), DNIS only (a value of (2)) or the no preference has been set (a value of (0)).rw DNISType .1.3.6.1.4.1.2352.2.28.1.1.1.20 |
rbnL2tpPCfgPoliceRateThis object indicates the received aggregate stream limit, in kilobits per second.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.2352.2.28.1.1.1.21 |
rbnL2tpPCfgPoliceBurstThis object indicates the packet burst tolerance for tunnels received by this peer group.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.2352.2.28.1.1.1.22 |
rbnL2tpPCfgLimitRateThis object indicates the limit of the aggregate packet stream transmitted through a tunnel in kilobits per second (kpbs).rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.2352.2.28.1.1.1.23 |
rbnL2tpPCfgLimitBurstThis object indicates the the packet burst tolerance limit transmitted on a tunnel.rw Unsigned32 UNITS "kbps" .1.3.6.1.4.1.2352.2.28.1.1.1.24 |
rbnL2tpPCfgGroupThis object indicates the l2tp group which is assigned to this peer. Each peer configuration may be assigned only one tunnel group. A length of 0 means that the group name was not assigned.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.28.1.1.1.25 |
rbnL2tpPCfgPrefThis object indicates the RADIUS based preference number (used by tunnel groups only). A lower number indicates a more favorible preference.rw Unsigned32 .1.3.6.1.4.1.2352.2.28.1.1.1.26 |
rbnL2tpPCfgPasswdThis object indicates the password for this account utilized when performing the connection handshake protocol with the remote host. A length of 0 indicates that no password has been assigned.rw SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.27 |
rbnL2tpPCfgHelloTimerThis object defines the interval (in seconds) in which Hello (or keep-alive) packets are to be sent by local tunnels belonging to this tunnel configuration.rw Unsigned32 .1.3.6.1.4.1.2352.2.28.1.1.1.28 |
rbnL2tpPCfgRecQueThis object indicates whether there is receive queueing of out of sequence messages. A value of true (1) indicates that the messages are queued.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.1.1.29 |
rbnL2tpPCfgSessContextThis object indicates the name of the session context. A size of 0 indicates that the context could not be determined. Any context name length greater than 80 will be truncated. This will have a value for PPPoE only.rw SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.30 |
rbnL2tpPCfgSessServiceThe service group to which this session belongs. A length of 0 indicates that no service group was assigned.rw SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.31 |
rbnL2tpPCfgEthEncapThis object indicates the ethernet encap type.rw EthEncapType .1.3.6.1.4.1.2352.2.28.1.1.1.32 |
rbnL2tpPCfgEthSessionThis object indicates the ethernet session of which this is a part. This is only set for non PPPoE sessions otherwise it will have a zero length.rw SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.1.1.33 |
rbnL2tpPCfgTunnelCountThis object indicates the number of tunnels that are active for this peer configuration.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.1.1.34 |
rbnL2tpPCfgTunCtlErrsThis object is a count of the number of tunnel control errors encountered by tunnels connected to this peer.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.1.1.35 |
rbnL2tpPCfgSessionCountThis object is a count of the number of sessions that are part of this peer.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.1.1.36 |
rbnL2tpTunnelCfgTableThe L2TP Tunnel Information Table. SEQUENCE OF RbnL2tpTunnelCfgEntry .1.3.6.1.4.1.2352.2.28.1.2 |
rbnL2tpTunnelCfgEntryAn L2TP Tunnel Information entry. An entry in this table corresponds to a single tunnel. Entries are added to this table as tunnels become connected. Entries are removed from the table if the communication with one or both ends of a tunnel is lost. RbnL2tpTunnelCfgEntry .1.3.6.1.4.1.2352.2.28.1.2.1 |
rbnL2tpMibTunnelIDThis object indicates the ID number of this tunnel. Unsigned32 .1.3.6.1.4.1.2352.2.28.1.2.1.1 |
rbnL2tpTCfgTunnelNmThis object indicates the local name that was given to this tunnel.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.2.1.2 |
rbnL2tpTCfgPeerNameThis object indicates the remote peer to which this tunnel is connected.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.2.1.3 |
rbnL2tpTCfgTunCtlErrsThis object is a count of the number of tunnel control errors encountered by this tunnel.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.2.1.4 |
rbnL2tpTCfgLastCtlErrThe value of the last control error.ro CtlErrType .1.3.6.1.4.1.2352.2.28.1.2.1.5 |
rbnL2tpTCfgLastCErrTimeThe time of the last control error.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.2.1.6 |
rbnL2tpTCfgTunDataErrsThe number of tunnel data errors.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.2.1.7 |
rbnL2tpTCfgLastDataErrThe value of the last tunnel data error.ro Unsigned32 .1.3.6.1.4.1.2352.2.28.1.2.1.8 |
rbnL2tpTCfgLastDErrTimeThe time of the last tunnel data error.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.2.1.9 |
rbnL2tpTCfgSessionCountThe number of sessions belonging to this tunnel.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.2.1.10 |
rbnL2tpTCfgTotActSessionsThis object indicates the total number of sessions that, at some time, reached the established state.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.2.1.11 |
rbnL2tpTCfgActSessCntThis object indicates the total number of sessions that are presently in the established state.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.2.1.12 |
rbnL2tpTCfgTotFailSessionsThis object indicates the number of sessions that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.2.1.13 |
rbnL2tpMibTunnelStateThis object is the current state of the tunnel.ro TunStateType .1.3.6.1.4.1.2352.2.28.1.2.1.14 |
rbnL2tpTCfgRemoteTunnelIDThis object indicates the remote tunnel ID. A value of zero indicates that the remote tunnel ID could not be determined.ro Unsigned32 .1.3.6.1.4.1.2352.2.28.1.2.1.15 |
rbnL2tpTCfgTunnelContextThis object identifies the context of this tunnel. The empty context name (zero length) indicates that the context could not be determined. Any context name length greater than 80 will be truncated.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.2.1.16 |
rbnL2tpPeerCntTableThe L2TP Peer Statistics Table. SEQUENCE OF RbnL2tpPeerCntEntry .1.3.6.1.4.1.2352.2.28.1.4 |
rbnL2tpPeerCntEntryAn L2TP Peer Statistics entry. An entry in this table corresponds to a single peer. The statistics reported are the totals for all tunnels that are a part of this peer group. RbnL2tpPeerCntEntry .1.3.6.1.4.1.2352.2.28.1.4.1 |
rbnL2tpPCDataPktSentThis object is a count of the total number of data packets sent through tunnels that are part of this group to the the L2TP peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.1 |
rbnL2tpPCDataPktRxThis object is a count of the total number of data packets received through tunnels that are part of this group from the the L2TP peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.2 |
rbnL2tpPCDataByteSentThis object is a count of the total number of data bytes sent through tunnels that are part of this group to the the L2TP peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.4.1.3 |
rbnL2tpPCDataByteRxThis object is a count of the total number of data bytes received through tunnels that are part of this group from the the L2TP peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.4.1.4 |
rbnL2tpPCCtlPktSentThis object is a count of the total number of control packets sent through tunnels that are part of this group to the the L2TP peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.5 |
rbnL2tpPCCtlPktRxThis object is a count of the total number of control packets received through tunnels that are a part of this group from the L2TP peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.6 |
rbnL2tpPCCtlByteSentThis object is a count of the total number of control bytes sent through tunnels that are a part of this group to the the L2TP peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.4.1.7 |
rbnL2tpPCCtlByteRxThis object is a count of the total number of control bytes received through tunnels that are a part of this group from the L2TP peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.4.1.8 |
rbnL2tpPCPolicePktDropThis object indicates the total number of packets received from L2TP peers of tunnels that are a part of this group that were dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.9 |
rbnL2tpPCRatePktDropThis object indicates the total number of packets transmitted to the L2TP peers of tunnels in this group that were dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.4.1.10 |
rbnL2tpPCTxSCCRQCntThis object indicates a count of the SCCRQ transmits for this group.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.4.1.11 |
rbnL2tpPCRxSCCRQCntThis object is a count of the received SCCRQ's for this group.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.4.1.12 |
rbnL2tpPCActTunnelsThis object indicates the number of the active tunnels for this group.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.4.1.13 |
rbnL2tpPCTunnelCtlErrThis object indicates the total number of tunnel control errors for all of the tunnels that are a part of this group.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.4.1.14 |
rbnL2tpPCSessionCountThis object indicates the total number of sessions for this group.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.4.1.15 |
rbnL2tpPCTunnelDataErrThis object indicates the total number of tunnel data errors reported by members of this group.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.4.1.16 |
rbnL2tpTunnelCntTableThe L2TP Tunnel Statistics Table. SEQUENCE OF RbnL2tpTunnelCntEntry .1.3.6.1.4.1.2352.2.28.1.5 |
rbnL2tpTunnelCntEntryAn L2TP Tunnel Statistics entry. An entry in this table corresponds to a single tunnel. RbnL2tpTunnelCntEntry .1.3.6.1.4.1.2352.2.28.1.5.1 |
rbnL2tpTCDataPktSentThis object indicates the number of data packets sent from this platform through this tunnel to its peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.1 |
rbnL2tpTCDataPktRcvdThis object indicates the number of packets received from the L2TP peer for this tunnel.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.2 |
rbnL2tpTCDataByteSentThis object indicates the number of data bytes sent from this platform through this tunnel to its peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.5.1.3 |
rbnL2tpTCDataByteRcvdThis object indicates the number of data bytes received from the L2TP peer for this tunnel.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.5.1.4 |
rbnL2tpTCCntrlPktSentThis object indicates the number of control packets sent from this platform through this tunnel to its L2TP peer.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.5 |
rbnL2tpTCCntrlPktRcvdThis object indicates the number of control packets received from the L2TP peer for this tunnel.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.6 |
rbnL2tpTCCntrlByteSentThis object indicates the number of control bytes sent from this platform through this tunnel to its L2TP peer.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.5.1.7 |
rbnL2tpTCCntrlByteRcvdThis object indicates the number of control bytes received from the L2TP peer of this tunnel.ro Counter32 UNITS "bytes" .1.3.6.1.4.1.2352.2.28.1.5.1.8 |
rbnL2tpTCPolicePktDropThis object indicates the number of packets received from the L2TP peer of this tunnel that were dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.9 |
rbnL2tpTCRatePktDropThis object indicates the number of packets transmitted from this platform through this tunnel that were dropped.ro Counter32 UNITS "packets" .1.3.6.1.4.1.2352.2.28.1.5.1.10 |
rbnL2tpTCCntrlErrThis object indicate the number of control errors that were detected.ro Unsigned32 .1.3.6.1.4.1.2352.2.28.1.5.1.11 |
rbnL2tpTCLastCtlErrThis object indicates the last control error for this tunnel that was detected.ro CtlErrType .1.3.6.1.4.1.2352.2.28.1.5.1.12 |
rbnL2tpTCLastCtlErrTimeThis object indicates the time that the last control error for this tunnel was detected.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.5.1.13 |
rbnL2tpTCMaxResendQThis object indicates the maximum length of the resend queue.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.5.1.14 |
rbnL2tpTCMaxUnsentQThis object indicates the maximum length of the unsent queue.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.5.1.15 |
rbnL2tpTCCurResendQThis object indicates the current length of the resend queue.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.5.1.16 |
rbnL2tpTCCurUnsentQThis object indicates the current length of the unsent queue.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.5.1.17 |
rbnL2tpTCCurWindowThis object indicates the current window size.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.5.1.18 |
rbnL2tpSessionCntTableThe L2TP Session Statistics Table. SEQUENCE OF RbnL2tpSessionCntEntry .1.3.6.1.4.1.2352.2.28.1.6 |
rbnL2tpSessionCntEntryAn L2TP Session Statistics entry. An entry in this table corresponds to a single session. RbnL2tpSessionCntEntry .1.3.6.1.4.1.2352.2.28.1.6.1 |
rbnL2tpMibSessionIDThis object identifies the Session ID for a given L2TP session. Unsigned32 .1.3.6.1.4.1.2352.2.28.1.6.1.1 |
rbnL2tpSCPktSentThis object indicates the number of packets sent by this platform in this session.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.6.1.2 |
rbnL2tpSCPktRcvdThis object indicates the number of packets received by this platform in this session.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.6.1.3 |
rbnL2tpSCByteSentThis object indicates the number of bytes sent by this platform in this session.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.6.1.4 |
rbnL2tpSCByteRcvdThis object indicates the number of bytes received by this platform in this session.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.6.1.5 |
rbnL2tpSCMcastPktSentThis object indicates the number of multicast packets sent by this platform in this session.ro Counter64 .1.3.6.1.4.1.2352.2.28.1.6.1.6 |
rbnL2tpSCMcastPktRcvdThis object indicates the number of multicast packets received by this platform in this session.ro Counter64 .1.3.6.1.4.1.2352.2.28.1.6.1.7 |
rbnL2tpSCMcastByteSentThis object indicates the number of multicast bytes sent by this platform in this session.ro Counter64 .1.3.6.1.4.1.2352.2.28.1.6.1.8 |
rbnL2tpSCMcastByteRcvdThis object indicates the number of multicast bytes received by this platform in this session.ro Counter64 .1.3.6.1.4.1.2352.2.28.1.6.1.9 |
rbnL2tpMibTrapObj OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.1.7 |
rbnL2tpMibTunnelTrapContextThis object contains the context name to which this tunnel belongs.rodeprecated SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.7.1 |
rbnL2tpMibTunnelTrapStateThe tunnel state. A value of 1 (true) indicates that a the tunnel is up (in the ESTABLISHED state). A value of 2 (false) indicates that the tunnel is down (no longer in the ESTABLISHED state).rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.7.2 |
rbnL2tpMibDisableTrapThis object will provide a mechanism for disabling and enabling tunnel traps. A value of 1 (true) indicates that tunnel traps are disabled. A value of 2 (false) indicates that tunnel traps are enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.28.1.7.3 |
rbnL2tpPeerTunCfgTableThis table contains objects which identify L2TP peers and tunnels. SEQUENCE OF RbnL2tpPeerTunCfgEntry .1.3.6.1.4.1.2352.2.28.1.8 |
rbnL2tpPeerTunCfgEntryA conceptual row in the rbnL2tpPeerTunCfgTable. An entry in this table corresponds to a single tunnel of a L2TP peer. Entries are added to this table as tunnels become connected. Entries are removed from the table if the communication with one or both ends of a tunnel is lost. RbnL2tpPeerTunCfgEntry .1.3.6.1.4.1.2352.2.28.1.8.1 |
rbnL2tpPTCfgTunnelRemoteIDThis object indicates the remote tunnel ID. A value of zero indicates that the remote tunnel ID could not be determined.ro Unsigned32 .1.3.6.1.4.1.2352.2.28.1.8.1.1 |
rbnL2tpPTCfgTunnelLocalNmThis object indicates the local name that was given to this tunnel. The length of the string will be zero if no local name assigned to the tunnel.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.8.1.2 |
rbnL2tpPTCfgTunnelRemoteNmThis object indicates the name that was given to the remote end of this tunnel. The length of the string will be zero if no tunnel name can be obtained from the peer.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.8.1.3 |
rbnL2tpPTCfgPeerLocalNmThis object identifies the local peer name. The empty peer name (zero length) indicates that the name could not be determined.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.8.1.4 |
rbnL2tpPTCfgTunnelRemoteIPAddrTypeThis object identifies the address type contained in rbnL2tpPTCfgTunnelRemoteIPAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.8.1.5 |
rbnL2tpPTCfgTunnelRemoteIPAddrThis object identifies the remote IP address for this tunnel (utilized only with User Datagram Protocol).ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2352.2.28.1.8.1.6 |
rbnL2tpPTCfgTunnelStateThis object is the current state of the tunnel.ro TunStateType .1.3.6.1.4.1.2352.2.28.1.8.1.7 |
rbnL2tpPTCfgTunnelContextThis object identifies the context of this tunnel. The empty context name (zero length) indicates that the context could not be determined. Any context name length greater than 80 will be truncated.ro SnmpAdminString .1.3.6.1.4.1.2352.2.28.1.8.1.8 |
rbnL2tpPTCfgSessionCountThe number of sessions belonging to this tunnel.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.8.1.9 |
rbnL2tpPTCfgActSessCntThis object indicates the total number of sessions that are presently in the established state.ro Gauge32 .1.3.6.1.4.1.2352.2.28.1.8.1.10 |
rbnL2tpPTCfgTotActSessionsThis object indicates the total number of sessions that, at some time, reached the established state.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.8.1.11 |
rbnL2tpPTCfgTotFailSessionsThis object indicates the number of sessions that failed to reach the established state.ro Counter32 .1.3.6.1.4.1.2352.2.28.1.8.1.12 |
rbnL2tpMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.2 |
rbnL2tpMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.2.1 |
rbnL2tpMibPeerCfgGroupA collection of objects providing peer information of the L2TP protocol, tunnels and sessions. Unknown .1.3.6.1.4.1.2352.2.28.2.1.1 |
rbnL2tpMibTunnelCfgGroupA collection of objects providing status and statistics of the L2TP protocol, tunnels and sessions. Unknown .1.3.6.1.4.1.2352.2.28.2.1.2 |
rbnL2tpMibPeerCntGroupA collection of objects providing peer count statistics. Unknown .1.3.6.1.4.1.2352.2.28.2.1.3 |
rbnL2tpMibTunnelCntGroupA collection of objects providing tunnel count statistics. Unknown .1.3.6.1.4.1.2352.2.28.2.1.4 |
rbnL2tpMibSessionCntGroupA collection of objects providing session count statistics. Unknown .1.3.6.1.4.1.2352.2.28.2.1.5 |
rbnL2tpMibGroupThe collection of groups which represent a tunnel state change or can effect the notification of such change. This group is replaced by rbnL2tpMibGroup2.deprecated Unknown .1.3.6.1.4.1.2352.2.28.2.1.7 |
rbnL2tpMibNotificationGroupA collection of rbnL2tpMib notifications. This group is replaced by rbnL2tpMibNotificationGroup2.deprecated Unknown .1.3.6.1.4.1.2352.2.28.2.1.8 |
rbnL2tpMibGroup2Object for managing L2TP notifications. Unknown .1.3.6.1.4.1.2352.2.28.2.1.9 |
rbnL2tpMibNotificationGroup2Notification for tracking the status of L2TP tunnels. Unknown .1.3.6.1.4.1.2352.2.28.2.1.10 |
rbnL2tpMibPeerTunCfgGroupA collection of objects providing status and statistics of the L2TP peers and tunnels. Unknown .1.3.6.1.4.1.2352.2.28.2.1.11 |
rbnL2tpMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.28.2.2 |
rbnL2tpMibComplianceThe compliance statement for SNMPv2 entities which implement the L2TP MIB.deprecated Unknown .1.3.6.1.4.1.2352.2.28.2.2.1 |
rbnL2tpMibCompliance2The compliance statement for SNMP entities which implement the Redback L2TP MIB. Unknown .1.3.6.1.4.1.2352.2.28.2.2.2 |