RBN-NOTIFY-ENHANCE-MIB
AI MIB Summary
The RBN-NOTIFY-ENHANCE-MIB extends the notification payload for RedBack Networks hardware to include enhanced event details and specific operational state changes for routing and switching components. This module facilitates precise fault isolation and performance monitoring by augmenting standard SNMP traps with vendor-specific diagnostic data.
The MIB used to enhance the notification objects on RedBack Networks devices.
Main OID:
rbnNotifyEnhanceMIB.1.3.6.1.4.1.2352.2.36
18
Objects
Active
Status
13
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
rbnNotifyEnhanceMIBThe MIB used to enhance the notification objects on
RedBack Networks devices. MODULE-IDENTITY .1.3.6.1.4.1.2352.2.36 |
rbnNotifyEnhanceMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.0 |
rbnNEentConfigChangeThis is an enhanced version of entConfigChange trap
defined in ENTITY-MIB.
The rbnNEentConfigChange trap generation is enabled only
when 'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.1 |
rbnNECardAlarmThis is an enhanced version of rbnCardAlarm trap defined
in RBN-CARDMON-MIB.
The rbnNECardAlarm trap generation is enabled only when
'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.2 |
rbnNElinkDownThis is an enhanced version of linkDown trap defined in
IF-MIB.
The rbnNElinkDown trap generation is enabled only when
'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.3 |
rbnNElinkUpThis is an enhanced version of linkUp trap defined in
IF-MIB.
The rbnNElinkUp trap generation is enabled only when
'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.4 |
rbnNEdsx1LineStatusChangeThis is an enhanced version of dsx1LineStatusChange
defined in DS1-MIB.
The rbnNEdsx1LineStatusChange trap generation is enabled only
when 'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.5 |
rbnNEdsx3LineStatusChangeThis is an enhanced version of dsx3LineStatusChange
defined in DS3-MIB.
The rbnNEdsx3LineStatusChange trap generation is enabled only
when 'traps nemib {exclusive | non-exclusive}' CLI command
is configured. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.36.0.6 |
rbnNotifyEnhanceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.1 |
rbnNEGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.1.1 |
rbnNESlotRepresents the chassis slot number in which the entity
associated with the notification is contained in.
A value of '0' indicates that the entity is not contained
within a chassis slot.ro RbnSlot (RBN-TC) .1.3.6.1.4.1.2352.2.36.1.1.1 |
rbnNECardNameA textual description of the linecard associated with
the notification.ro DisplayString .1.3.6.1.4.1.2352.2.36.1.1.2 |
rbnNECardOpRepresents the operation performed on the linecard
associated with the notification.ro Enumeration .1.3.6.1.4.1.2352.2.36.1.1.3 |
rbnNECircuitIdRepresents a string that identifies the circuit
associated with the notification.
On the SE router this string is formatted as
slot-port-channel-subchannel, with the exception that
channel and subchannel are only included when appropriate.
If the circuit is a link-group circuit, then the value
contains the link group name rather than the formatted
slot-port-channel-subchannel.ro DisplayString .1.3.6.1.4.1.2352.2.36.1.1.4 |
rbnNEGroupNameThe link group name associated with the resource
identified in a notification.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.36.1.1.5 |
rbnNotifyEnhanceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.2 |
rbnNotifyEnhanceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.2.1 |
rbnNotifyEnhanceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.36.2.2 |