RBN-MC-LAG-MIB
AI MIB Summary
The RBN-MC-LAG-MIB module enables monitoring and management of Multi-Chassis Link Aggregation (MC-LAG) session states, peer synchronization status, and interface aggregation parameters on Ruckus (ARRIS) network switches. It provides specific metrics for tracking MC-LAG member link health, control plane heartbeat intervals, and failover event counters to ensure high-availability data plane redundancy.
Creating new file with same renamed contents from RBN-LAG-MIB.my. Renaming: Lag to McLag.
Main OID:
rbnMcLagMIB.1.3.6.1.4.1.2352.2.102
34
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
34 total| Object Name |
|---|
rbnMcLagMIBCreating new file with same renamed contents from RBN-LAG-MIB.my. Renaming: Lag to McLag. MODULE-IDENTITY .1.3.6.1.4.1.2352.2.102 |
rbnMcLagNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.102.0 |
rbnMcLagSwitchOverEventAn MC-LAG switch-over trap indicates that a switch-over has happened and also it identifies which LAG will become active LAG. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.102.0.1 |
rbnMcLagOperFailedThis trap indicates an MC-LAG has failed and why. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.102.0.2 |
rbnMcLagOperFailureClearedThis trap indicates an MC-LAG has recovered from a failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.102.0.3 |
rbnMcLagConstituentPortUpThis trap indicates whether LACP on a constituent link is active in a LAG of an MC-LAG. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.102.0.4 |
rbnMcLagConstituentPortDownThis trap indicates whether LACP on a constituent link has failed in a LAG of an MC-LAG. NOTIFICATION-TYPE .1.3.6.1.4.1.2352.2.102.0.5 |
rbnMcLagObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.102.1 |
rbnMcLagTableThis table consists of MC-LAG management objects. SEQUENCE OF RbnMcLagEntry .1.3.6.1.4.1.2352.2.102.1.1 |
rbnMcLagEntryEach entry contains management objects of an MC-LAG node. RbnMcLagEntry .1.3.6.1.4.1.2352.2.102.1.1.1 |
rbnMcLagNameThis string name uniquely identifies an MC-LAG within an MC-LAG cluster. Within an MC-LAG cluster, there could not be two LAG with the same name on the same chassis. The MC-LAGs with the same name on different chassis are peer to each other. SnmpAdminString .1.3.6.1.4.1.2352.2.102.1.1.1.1 |
rbnMcLagIdThe identifier is assigned to a LAG on individual chassis at the time of LAG configuration. This identifier could be different between LAG in the same MC-LAG. There is no coordination between the two id manager on the two chassis in assigning the LAG ID on different chassis.ro Integer32 .1.3.6.1.4.1.2352.2.102.1.1.1.2 |
rbnMcLagSystemPriorityThis is a configurable value. The system priority will form part of the link-group system id. System priority priority will occupy the last 32 bit of the system-id.ro Integer32 .1.3.6.1.4.1.2352.2.102.1.1.1.3 |
rbnMcLagSystemMacAddressThe .ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2352.2.102.1.1.1.4 |
rbnMcLagRevertiveModeThis boolean value indicates whether revertive mode is set for an MC-LAG. If revertive mode is set, the LAG with higher priority starts the revertive process once it recovers from some failures to a state where it has regained capacity to take over as the active LAG of an MC-LAG.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2352.2.102.1.1.1.5 |
rbnMcLagRevertiveHoldTimerThis is a configurable value in revertive mode. If this value is configured, the LAG with higher priority will hold off for the seconds configured by the value before starting the revertive procedure.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.2352.2.102.1.1.1.6 |
rbnMcLagOperStateThe current MC-LAG state: Up - When the MC-LAG is active on one of the two chassis. In this state, the traffic are flowing through the active LAG. Down - When the MC-LAG is down, the LAG is not in a position to take over as active LAG of an MC-LAG. Standby - When the MC-LAG is standby, the LAG is ready to take over as the active LAG fails.ro Enumeration .1.3.6.1.4.1.2352.2.102.1.1.1.7 |
rbnMcLagOperErrorCodeThe reason that MC-LAG is Down. configMismatch - MC-LAG is down because LAG related configuration is not the same between the two LAGs in an MC-LAG. priorityError - MC-LAG is down because the configured port priority values between the two LAGs of an MC-LAG are ambiguous as to which LAG is higher in priority. downMinLink - MC-LAG is down because the LAG doesn't have enough links that are up to satisfy the configured minimum link requirement.ro Enumeration .1.3.6.1.4.1.2352.2.102.1.1.1.8 |
rbnMcLagSwitchOverTimeThis indicated the last time MC-LAG was switched-over.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2352.2.102.1.1.1.9 |
rbnMcLagSwitchOverReasonThis indicate in text the reason for MC-LAG switchover.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2352.2.102.1.1.1.10 |
rbnMcLagConstituentTableThis is a table of constituent links for a LAG SEQUENCE OF RbnMcLagConstituentEntry .1.3.6.1.4.1.2352.2.102.1.2 |
rbnMcLagConstituentEntryA constituent link of an MCLAG. A constituent link is uniquely identified by a slot, port, and port priority. RbnMcLagConstituentEntry .1.3.6.1.4.1.2352.2.102.1.2.1 |
rbnMcLagConstituentNameThis string name uniquely identifies an MC-LAG within an MC-LAG cluster. Within an MC-LAG cluster, there could not be two LAG with the same name on the same chassis. The MC-LAGs with the same name on different chassis are peer to each other. SnmpAdminString .1.3.6.1.4.1.2352.2.102.1.2.1.1 |
rbnMcLagConstituentSlotThis indicates the slot number of the constituent link. RbnSlot (RBN-TC) .1.3.6.1.4.1.2352.2.102.1.2.1.2 |
rbnMcLagConstituentPortThis indicates the port number of the constituent link. RbnPort (RBN-TC) .1.3.6.1.4.1.2352.2.102.1.2.1.3 |
rbnMcLagConstituentPortPriorityThis indicates the configured priority of the constituent link.ro Integer32 .1.3.6.1.4.1.2352.2.102.1.2.1.4 |
rbnMcLagConstituentPortIfIndexThe hardware interface index associated with the constituent link.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2352.2.102.1.2.1.5 |
rbnMcLagConstituentLACPErrorCodeThe reason LACP on a constituent is down. portFailure - LACP is down because the consitutent port is down. ccmFailure - LACP is down because the ccm is down. bfdFailure - LACP is down because bfd is down.ro Enumeration .1.3.6.1.4.1.2352.2.102.1.2.1.6 |
rbnMcLagConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.102.2 |
rbnMcLagGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.102.2.1 |
rbnMcLagObjectGroupCollection of scalar objects required for Multi-chassis Link-group management. Unknown .1.3.6.1.4.1.2352.2.102.2.1.1 |
rbnMcLagNotificationGroupObjects required for Multi-chassis Link-group notifications. Unknown .1.3.6.1.4.1.2352.2.102.2.1.2 |
rbnMcLagCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2352.2.102.2.2 |
rbnMcLagModuleComplianceCompliance statement for agents that provide support for the RBN-MC-LAG-MIB Unknown .1.3.6.1.4.1.2352.2.102.2.2.1 |