RADLAN-rndMng
The RADLAN-rndMng private MIB module facilitates the monitoring and management of general system parameters, including interface status, device health, and operational statistics, on RND (Ruckus Wireless) access points and controllers. It enables network administrators to retrieve specific counter data and state information via SNMP for troubleshooting and capacity planning within RND wireless LAN infrastructures.
Imported Objects
Objects
11 total| Object Name |
|---|
rndMngThe private MIB module definition for RND general management MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.1 |
rndSysIdIdentification of an RND device. The device type for each
integer clarifies the sysObjectID in MIB - II.ro INTEGER .1.3.6.1.4.1.89.1.1 |
rndActionThis variable enables the operator to perform one of the
specified actions on the tables maintained by the network device.
Send actions require support of proprietery File exchange
protocol.rw Enumeration .1.3.6.1.4.1.89.1.2 |
rndFileNameThe name of the file used internally by RND for transferring
tables maintained by network devices, using a prorietary File
exchange protocol.rw OCTET STRING -- SIZE 256 .1.3.6.1.4.1.89.1.3 |
rlSnmpVersionSupportedIndicates the snmp versions that are supported by
this device.ro OCTET STRING .1.3.6.1.4.1.89.1.4 |
rlSnmpMibVersionIndicates the snmp support version that is supported by
this device.ro INTEGER .1.3.6.1.4.1.89.1.5 |
rlCpuUtilEnableEnables measurement of the device CPU utilization.
In order to get real values for rlCpuUtilDuringLastSecond, rlCpuUtilDuringLastMinute
and rlCpuUtilDuringLast5Minutes, the value of this object must be true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.1.6 |
rlCpuUtilDuringLastSecondPercentage of the device CPU utilization during last second.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or was disabled during last second).ro INTEGER .1.3.6.1.4.1.89.1.7 |
rlCpuUtilDuringLastMinutePercentage of the device CPU utilization during last minute.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or was disabled during last minute).ro INTEGER .1.3.6.1.4.1.89.1.8 |
rlCpuUtilDuringLast5MinutesPercentage of the device CPU utilization during the last 5 minutes.
The value 101 is a dummy value, indicating that the CPU utilization was
not measured (since measurement is disabled or was disabled during last 5 minutes).ro INTEGER .1.3.6.1.4.1.89.1.9 |
rlRebootDelaySetting the variable will cause the device to reboot rlRebootDelay timeticks
from the moment this variable was set.
If not set, the variable will return a value of 4294967295.
If set to 4294967295, reboot action is cancelled.
The maximum delay is set by the host parameter: reboot_delay_maxrw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.89.1.10 |
More MIBs from Rnd
Browse all RndMIBs →Standard SNMP MIB module defining data structures for RADLAN-MIB.
Standard SNMP MIB module defining data structures for RADWARE-MIB.
The RADLAN-IPV6FHS-MIB enables monitoring and management of IPv6 First Hop Security (FHS) mechanisms, specifically tracking Neighbor Discovery Protocol (NDP) states, binding table entries, and security policy violations on RADLAN network devices. This module facilitates the detection of rogue routers, duplicate address detection failures, and unauthorized neighbor advertisements to enforce Layer 2/Layer 3 security boundaries.
SNMP MIB module
SNMP MIB module
The LINKSYS-POLICY-MIB enables monitoring and configuration of generic traffic policy rules, including bandwidth limits and QoS classifications, on Linksys networking hardware via SNMP. This private module exposes specific policy identifiers, action states, and associated traffic counters to facilitate granular traffic management and enforcement.