RADLAN-rlFft
AI MIB Summary
The RADLAN-rlFft MIB module provides vendor-specific management access to Fast Forwarding Tables on RADLAN networking hardware, enabling the monitoring of forwarding table entries, MAC address mappings, and associated interface statistics. This module facilitates the tracking of Layer 2 switching states and forwarding path integrity within the device's internal forwarding plane.
The private MIB module definition for Fast Forwarding Tables.
Main OID:
rlFFT.1.3.6.1.4.1.89.47
165
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
165 total| Object Name |
|---|
rlFFTThe private MIB module definition for Fast Forwarding Tables. MODULE-IDENTITY .1.3.6.1.4.1.89.47 |
rlIpFFT OBJECT IDENTIFIER .1.3.6.1.4.1.89.47.1 |
rlIpFftMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.47.1.1 |
rlIpMaxFftNumberThe maximum number of IP FFTs.ro INTEGER .1.3.6.1.4.1.89.47.1.2 |
rlIpFftDynamicSupportedSpecifies whether dynamic IP FFTs are supported.ro Enumeration .1.3.6.1.4.1.89.47.1.3 |
rlIpFftSubnetSupportedSpecifies whether subtable per IP subnet is supported.ro Enumeration .1.3.6.1.4.1.89.47.1.4 |
rlIpFftUnknownAddrMsgUsedSpecifies whether the 3SW uses the unknown address message.ro Enumeration .1.3.6.1.4.1.89.47.1.5 |
rlIpFftAgingTimeSupportedSpecifies whether aging time is supported.ro Enumeration .1.3.6.1.4.1.89.47.1.6 |
rlIpFftSrcAddrSupportedSpecifies whether an IP subtable per station contains source IP address.ro Enumeration .1.3.6.1.4.1.89.47.1.7 |
rlIpFftAgingTimeoutThe aging timeout in seconds.rw INTEGER .1.3.6.1.4.1.89.47.1.8 |
rlIpFftRedBoundaryThe red boundary in percents.rw Percents .1.3.6.1.4.1.89.47.1.9 |
rlIpFftYellowBoundaryThe yellow boundary in percents.rw Percents .1.3.6.1.4.1.89.47.1.10 |
rlIpFftNumTableThe (conceptual) table containing routes' numbers of
the IP SFFTs and IP NFFTs. SEQUENCE OF RlIpFftNumEntry .1.3.6.1.4.1.89.47.1.12 |
rlIpFftNumEntryAn entry (conceptual row) containing the containing routes' numbers
of IP SFFT and IP NFFT RlIpFftNumEntry .1.3.6.1.4.1.89.47.1.12.1 |
rlIpFftNumIndexThe value of the index of the IP FFT.ro INTEGER .1.3.6.1.4.1.89.47.1.12.1.1 |
rlIpFftNumStnRoutesNumberThe number of routes that are contained in the IP SFFT.ro INTEGER .1.3.6.1.4.1.89.47.1.12.1.2 |
rlIpFftNumSubRoutesNumberThe number of routes that are contained in the IP NFFT.ro INTEGER .1.3.6.1.4.1.89.47.1.12.1.3 |
rlIpFftStnTableThe (conceptual) table contains IP Fast Forwarding information
per station for IP datagrams. SEQUENCE OF RlIpFftStnEntry .1.3.6.1.4.1.89.47.1.13 |
rlIpFftStnEntryAn entry (conceptual row) contains the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses. RlIpFftStnEntry .1.3.6.1.4.1.89.47.1.13.1 |
rlIpFftStnIndexThe value of the index of the IP FFT.ro INTEGER .1.3.6.1.4.1.89.47.1.13.1.1 |
rlIpFftStnMridThe router's Instance Identifier in the SFFT.ro INTEGER .1.3.6.1.4.1.89.47.1.13.1.2 |
rlIpFftStnDstIpAddressThe IP destination address for which this entry
contains IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.1.13.1.3 |
rlIpFftStnDstRouteIpMaskThe IP destination mask for which this entry
contains IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.1.13.1.4 |
rlIpFftStnDstIpAddrTypeThe IP destination address type.ro Enumeration .1.3.6.1.4.1.89.47.1.13.1.5 |
rlIpFftStnDstMacAddressThe MAC destination address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.13.1.6 |
rlIpFftStnSrcMacAddressThe MAC source address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.13.1.7 |
rlIpFftStnOutIfIndexThe value of ifIndex of output physical port.ro INTEGER .1.3.6.1.4.1.89.47.1.13.1.8 |
rlIpFftStnVidThe vid of the output port.ro INTEGER .1.3.6.1.4.1.89.47.1.13.1.9 |
rlIpFftStnTaggedModeThe tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field gets the BasedPortConfig valuero Enumeration .1.3.6.1.4.1.89.47.1.13.1.10 |
rlIpFftStnAgeThe age of the entry in seconds from the inserting.ro INTEGER .1.3.6.1.4.1.89.47.1.13.1.11 |
rlIpFftSubTableThe (conceptual) table containing IP Fast Forwarding information
per subnet for IP datagrams. SEQUENCE OF RlIpFftSubEntry .1.3.6.1.4.1.89.47.1.14 |
rlIpFftSubEntryAn entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses. RlIpFftSubEntry .1.3.6.1.4.1.89.47.1.14.1 |
rlIpFftSubMridThe router's Instance Identifier in the NFFT.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.1 |
rlIpFftSubDstIpSubnetThe IP destination subnet for which this entry
contains IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.2 |
rlIpFftSubDstIpMaskThe IP destination mask for which this entry
contains IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.3 |
rlIpFftSubAgeThe age of the entry in seconds from the inserting.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.4 |
rlIpFftSubNextHopSetRefCountThe number of NFFT entries that used the given NextHop set (ECMP path).ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.5 |
rlIpFftSubNextHopCountThe number of used NextHops in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.6 |
rlIpFftSubNextHopIfindex1The first NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.7 |
rlIpFftSubNextHopIpAddr1The first NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.8 |
rlIpFftSubNextHopIfindex2The second NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.9 |
rlIpFftSubNextHopIpAddr2The second NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.10 |
rlIpFftSubNextHopIfindex3The third NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.11 |
rlIpFftSubNextHopIpAddr3The third NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.12 |
rlIpFftSubNextHopIfindex4The fourth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.13 |
rlIpFftSubNextHopIpAddr4The fourth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.14 |
rlIpFftSubNextHopIfindex5The fifth NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.15 |
rlIpFftSubNextHopIpAddr5The fifth NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.16 |
rlIpFftSubNextHopIfindex6The six NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.17 |
rlIpFftSubNextHopIpAddr6The six NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.18 |
rlIpFftSubNextHopIfindex7The seven NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.19 |
rlIpFftSubNextHopIpAddr7The seven NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.20 |
rlIpFftSubNextHopIfindex8The eight NextHop Ifindex in the given NextHop set (ECMP path) for the NFFT entry.ro INTEGER .1.3.6.1.4.1.89.47.1.14.1.21 |
rlIpFftSubNextHopIpAddr8The eight NextHop IP address in the given NextHop set (ECMP path) for the NFFT entry.ro IpAddress .1.3.6.1.4.1.89.47.1.14.1.22 |
rlIpFftCountersTableThe (conceptual) table containing IP Counters information
per one IP FFT. SEQUENCE OF RlIpFftCountersEntry .1.3.6.1.4.1.89.47.1.15 |
rlIpFftCountersEntryAn entry (conceptual row) containing the IP Counters
information containing amount of IP datagrams passed
by certain IP FFT. RlIpFftCountersEntry .1.3.6.1.4.1.89.47.1.15.1 |
rlIpFftCountersIndexThe value of the index of the IP FFT.ro INTEGER .1.3.6.1.4.1.89.47.1.15.1.1 |
rlIpFftInReceivesThe amount of received IP datagramsro INTEGER .1.3.6.1.4.1.89.47.1.15.1.2 |
rlIpFftForwDatagramsThe amount of forwarded IP datagramsro INTEGER .1.3.6.1.4.1.89.47.1.15.1.3 |
rlIpFftInDiscardsThe amount of discarded IP datagramsro INTEGER .1.3.6.1.4.1.89.47.1.15.1.4 |
rlIpFftNextHopTableThe (conceptual) table contains NextHop information
used for routing IP datagrams. SEQUENCE OF RlIpFftNextHopEntry .1.3.6.1.4.1.89.47.1.16 |
rlIpFftNextHopEntryAn entry (conceptual row) contains the NextHop info
information for routing IP datagrams. RlIpFftNextHopEntry .1.3.6.1.4.1.89.47.1.16.1 |
rlIpFftNextHopifindexThe value of the IP Interface index of the NextHop.ro INTEGER .1.3.6.1.4.1.89.47.1.16.1.1 |
rlIpFftNextHopIpAddressThe IP address of a NextHop for which an entry contains
IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.1.16.1.2 |
rlIpFftNextHopValidThe NextHop Valid bit. When L2 info is missing,
a NextHop has Invalid value.ro Enumeration .1.3.6.1.4.1.89.47.1.16.1.3 |
rlIpFftNextHopTypeThe NextHop type.ro Enumeration .1.3.6.1.4.1.89.47.1.16.1.4 |
rlIpFftNextHopReferenceCountIF LPM is supported:
If ecmp supported:
the field NextHop_ref_count used to save number
of NextHop SETs that use the NextHop.
Otherwise, NextHop_ref_count used to save number of
NFFT entries that use the NextHop.
IF LPM is NOT supported:
NextHop_ref_count used to save number of
Remote SFFT entries that use the NextHop.ro INTEGER .1.3.6.1.4.1.89.47.1.16.1.5 |
rlIpFftNextHopNetAddressThe NextHop Physical Address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.16.1.6 |
rlIpFftNextHopVidThe vid of the output port.ro INTEGER .1.3.6.1.4.1.89.47.1.16.1.7 |
rlIpFftNextHopMacAddressThe MAC destination address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.16.1.8 |
rlIpFftNextHopOutIfIndexThe value of ifIndex of output physical port.ro INTEGER .1.3.6.1.4.1.89.47.1.16.1.9 |
rlIpFftL2InfoTableThe (conceptual) table contains L2 information
used for routing IP datagrams. SEQUENCE OF RlIpFftL2InfoEntry .1.3.6.1.4.1.89.47.1.17 |
rlIpFftL2InfoEntryAn entry (conceptual row) contains the L2 info
information for routing IP datagrams. RlIpFftL2InfoEntry .1.3.6.1.4.1.89.47.1.17.1 |
rlIpFftL2InfoIfindexThe VLAN Ifindex of the destination port.ro INTEGER .1.3.6.1.4.1.89.47.1.17.1.1 |
rlIpFftL2InfoDstMacAddressThe MAC destination address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.17.1.2 |
rlIpFftL2InfoValidThe L2 info entry valid bit. When L2 info is missing some information,
an L2 info has Invalid value.ro Enumeration .1.3.6.1.4.1.89.47.1.17.1.3 |
rlIpFftL2InfoTypeThe L2 info type. With Enthernet media l2 info type is vlan.
WIth Tunneling feature, l2 info type will be expanded.ro Enumeration .1.3.6.1.4.1.89.47.1.17.1.4 |
rlIpFftL2InfoReferenceCountThe reference count contains a number of
NextHop entries that use this L2 info.ro INTEGER .1.3.6.1.4.1.89.47.1.17.1.5 |
rlIpFftL2InfoVidThe vid of the destination port.ro INTEGER .1.3.6.1.4.1.89.47.1.17.1.6 |
rlIpFftL2InfoSrcMacAddressThe MAC source address placed to Ehernet Header of IP forwarded packet.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.1.17.1.7 |
rlIpFftL2InfoOutIfIndexThe value of ifIndex of output physical port the packet is forwarded through.ro INTEGER .1.3.6.1.4.1.89.47.1.17.1.8 |
rlIpFftL2InfoTaggedModeThe tagged value of the port. When the Tagged field is not
a part of the FFT table in the ASIC,
the Tagged field get the BasedPortConfig value.ro Enumeration .1.3.6.1.4.1.89.47.1.17.1.9 |
rlIpxFFT OBJECT IDENTIFIER .1.3.6.1.4.1.89.47.2 |
rlIpxFftMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.47.2.1 |
rlIpxMaxFftNumberThe maximun number of IPX FFTs. An IPX FFT gets a number
from 1 until rlIpxMaxFftSetNumber.ro INTEGER .1.3.6.1.4.1.89.47.2.2 |
rlIpxFftDynamicSupportedSpecifies whether dynamic IPX FFTs are supported.ro Enumeration .1.3.6.1.4.1.89.47.2.3 |
rlIpxFftNetworkSupportedSpecifies whether subtable per IPX network is supported.ro Enumeration .1.3.6.1.4.1.89.47.2.4 |
rlIpxFftUnknownAddrMsgUsedSpecifies whether the 3SW uses the unknown address message.ro Enumeration .1.3.6.1.4.1.89.47.2.5 |
rlIpxFftAgingTimeSupportedSpecifies whether aging time is supported for subtable per station.ro Enumeration .1.3.6.1.4.1.89.47.2.6 |
rlIpxFftSrcAddrSupportedSpecifies whether an IPX subtable per station contains source
IPX address.ro Enumeration .1.3.6.1.4.1.89.47.2.7 |
rlIpxFftAgingTimeoutThe aging timeout in seconds.rw INTEGER .1.3.6.1.4.1.89.47.2.8 |
rlIpxFftRedBoundaryThe red boundary in percents.rw INTEGER .1.3.6.1.4.1.89.47.2.9 |
rlIpxFftYellowBoundaryThe yellow boundary in percents.rw Percents .1.3.6.1.4.1.89.47.2.10 |
rlIpxFftNumTableThe (conceptual) table containing number routes of
the IPX Fast Forwarding Table. SEQUENCE OF RlIpxFftNumEntry .1.3.6.1.4.1.89.47.2.12 |
rlIpxFftNumEntryAn entry (conceptual row) containing the containing number routes of
of IPX SFFT and IPX NFFT RlIpxFftNumEntry .1.3.6.1.4.1.89.47.2.12.1 |
rlIpxFftNumIndexThe value of the index of the IPX FFT.ro INTEGER .1.3.6.1.4.1.89.47.2.12.1.1 |
rlIpxFftNumStnRoutesNumberThe number of routes containing in the IPX SFFT.ro INTEGER .1.3.6.1.4.1.89.47.2.12.1.2 |
rlIpxFftNumSubRoutesNumberThe number of routes containing in the IPX NFFT.ro INTEGER .1.3.6.1.4.1.89.47.2.12.1.3 |
rlIpxFftStnTableThe (conceptual) table containing IPX Fast Forwarding information
per station for IPX. SEQUENCE OF RlIpxFftStnEntry .1.3.6.1.4.1.89.47.2.13 |
rlIpxFftStnEntryAn entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses. RlIpxFftStnEntry .1.3.6.1.4.1.89.47.2.13.1 |
rlIpxFftStnIndexThe value of the index of the IPX FFT.ro INTEGER .1.3.6.1.4.1.89.47.2.13.1.1 |
rlIpxFftStnDstNetidThe destination network for which this entry
contains IPX forwarding information.ro NetNumber .1.3.6.1.4.1.89.47.2.13.1.2 |
rlIpxFftStnDstNodeThe destination node for which this entry
contains IPX forwarding information.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.13.1.3 |
rlIpxFftStnSrcNetidThe source network for which this entry
contains IPX forwarding information.ro NetNumber .1.3.6.1.4.1.89.47.2.13.1.4 |
rlIpxFftStnSrcNodeThe destination node for which this entry
contains IPX forwarding information.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.13.1.5 |
rlIpxFftStnDstIpxAddrTypeThe destination address type.ro Enumeration .1.3.6.1.4.1.89.47.2.13.1.6 |
rlIpxFftStnEncapsulationThe encapsulation method associated with this route.ro Enumeration .1.3.6.1.4.1.89.47.2.13.1.7 |
rlIpxFftStnDstMacAddressThe MAC destination address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.13.1.8 |
rlIpxFftStnSrcMacAddressThe MAC source address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.13.1.9 |
rlIpxFftStnOutIfIndexThe value of ifIndex of output physical port.ro INTEGER .1.3.6.1.4.1.89.47.2.13.1.10 |
rlIpxFftStnTciThe value of TCI or 0.ro INTEGER .1.3.6.1.4.1.89.47.2.13.1.11 |
rlIpxFftStnFacsIndexThe value of index of the FACS Table.ro INTEGER .1.3.6.1.4.1.89.47.2.13.1.12 |
rlIpxFftStnAgeThe age of the entry in seconds.ro INTEGER .1.3.6.1.4.1.89.47.2.13.1.13 |
rlIpxFftSubTableThe (conceptual) table containing IPX Fast Forwarding information
per network for IPX . SEQUENCE OF RlIpxFftSubEntry .1.3.6.1.4.1.89.47.2.14 |
rlIpxFftSubEntryAn entry (conceptual row) containing the IP fast forwarding
information for IP datagrams from a particular source and
destination addresses. RlIpxFftSubEntry .1.3.6.1.4.1.89.47.2.14.1 |
rlIpxFftSubIndexThe value of the index of the IPX FFT.ro INTEGER .1.3.6.1.4.1.89.47.2.14.1.1 |
rlIpxFftSubDstNetidThe destination network for which this entry
contains IPX forwarding information.ro NetNumber .1.3.6.1.4.1.89.47.2.14.1.2 |
rlIpxFftSubEncapsulationThe encapsulation method associated with this route.ro Enumeration .1.3.6.1.4.1.89.47.2.14.1.3 |
rlIpxFftSubDstMacAddressThe MAC destination address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.14.1.4 |
rlIpxFftSubSrcMacAddressThe MAC source address.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.89.47.2.14.1.5 |
rlIpxFftSubOutIfIndexThe value of ifIndex of output physical port.ro INTEGER .1.3.6.1.4.1.89.47.2.14.1.6 |
rlIpxFftSubTciThe value of TCI or 0.ro INTEGER .1.3.6.1.4.1.89.47.2.14.1.7 |
rlIpxFftSubFacsIndexThe value of index of the FACS Table.ro INTEGER .1.3.6.1.4.1.89.47.2.14.1.8 |
rlIpxFftSubAgeThe age of the entry in seconds.ro INTEGER .1.3.6.1.4.1.89.47.2.14.1.9 |
rlIpxFftCountersTableThe (conceptual) table containing IPX Counters information
per one IPX FFT. SEQUENCE OF RlIpxFftCountersEntry .1.3.6.1.4.1.89.47.2.15 |
rlIpxFftCountersEntryAn entry (conceptual row) containing the IP Counters
information containing amount of IPX datagrams passed
by certain IPX FFT. RlIpxFftCountersEntry .1.3.6.1.4.1.89.47.2.15.1 |
rlIpxFftCountersIndexThe value of the index of the IPX FFT.ro INTEGER .1.3.6.1.4.1.89.47.2.15.1.1 |
rlIpxFftInReceivesThe amount of received IPX datagramsro INTEGER .1.3.6.1.4.1.89.47.2.15.1.2 |
rlIpxFftForwDatagramsThe amount of forwarded IPX datagramsro INTEGER .1.3.6.1.4.1.89.47.2.15.1.3 |
rlIpxFftInDiscardsThe amount of discarded IPX datagramsro INTEGER .1.3.6.1.4.1.89.47.2.15.1.4 |
rlIpmFFT OBJECT IDENTIFIER .1.3.6.1.4.1.89.47.3 |
rlIpmFftMibVersionMIB's version, the current version is 1.ro INTEGER .1.3.6.1.4.1.89.47.3.1 |
rlIpmMaxFftNumberThe maximun number of IPM FFTs. NT_IPM gets a number
from Host Parametersro INTEGER .1.3.6.1.4.1.89.47.3.2 |
rlIpmFftDynamicSupportedSpecifies whether dynamic IPM FFTs are supported.
An NT_IPM gets a number from Host Parametersro Enumeration .1.3.6.1.4.1.89.47.3.3 |
rlIpmFftUnknownAddrMsgUsedSpecifies whether the 3SW uses the unknown address message.
An NT_IPM gets a number from Host Parametersro Enumeration .1.3.6.1.4.1.89.47.3.4 |
rlIpmFftUserAgingTimeoutThe aging timeout in seconds. SNMP user writes.
There is a default value of aging timeout.rw Unsigned32 .1.3.6.1.4.1.89.47.3.5 |
rlIpmFftRouterAgingTimeoutThe aging timeout in seconds. NT_IPM keeps value that
Router level gave. This is high priority value for aging timeout.ro INTEGER .1.3.6.1.4.1.89.47.3.6 |
rlIpmFftNumTableThe (conceptual) table containing number routes of
the IPM Fast Forwarding Table. SEQUENCE OF RlIpmFftNumEntry .1.3.6.1.4.1.89.47.3.8 |
rlIpmFftNumEntryAn entry (conceptual row) containing the containing number routes of
an IPM FFT. RlIpmFftNumEntry .1.3.6.1.4.1.89.47.3.8.1 |
rlIpmFftNumIndexThe value of the index of the IPM FFT.ro INTEGER .1.3.6.1.4.1.89.47.3.8.1.1 |
rlIpmFftNumRoutesNumberThe number of routes containing in the IPM FFT.ro INTEGER .1.3.6.1.4.1.89.47.3.8.1.2 |
rlIpmFftTableThe (conceptual) table containing IPM Fast Forwarding information
for IPM datagrams. SEQUENCE OF RlIpmFftEntry .1.3.6.1.4.1.89.47.3.9 |
rlIpmFftEntryAn entry (conceptual row) containing the IPM fast forwarding
information for IP datagrams from a particular source and
destination addresses. RlIpmFftEntry .1.3.6.1.4.1.89.47.3.9.1 |
rlIpmFftIndexThe value of the index of the IPM FFT.ro INTEGER .1.3.6.1.4.1.89.47.3.9.1.1 |
rlIpmFftSrcIpAddressThe IP source address for which this entry
contains IPM forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.3.9.1.2 |
rlIpmFftDstIpAddressThe IPM destination address for which this entry
contains IPM forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.3.9.1.3 |
rlIpmFftSrcIpMaskThe IP source mask for which this entry
contains IP forwarding information.ro IpAddress .1.3.6.1.4.1.89.47.3.9.1.4 |
rlIpmFftInputIfIndexThe input ifIndex for which this entry
contains IPM forwarding information.ro INTEGER .1.3.6.1.4.1.89.47.3.9.1.5 |
rlIpmFftInputVlanTagThe input Vlan tag together with input ifIndex defines
pair (ifIndex, tag)ro INTEGER .1.3.6.1.4.1.89.47.3.9.1.6 |
rlIpmFftForwardActionThe IPM forward action.ro Enumeration .1.3.6.1.4.1.89.47.3.9.1.7 |
rlIpmFftInportActionThe IPM illegal input port action.ro Enumeration .1.3.6.1.4.1.89.47.3.9.1.8 |
rlIpmFftAgeThe age of the entry in seconds from the moment of inserting.ro INTEGER .1.3.6.1.4.1.89.47.3.9.1.9 |
rlIpmFftPortTagTableThe (conceptual) table containing IPM FFT output port tag information
for IPM datagrams. SEQUENCE OF RlIpmFftPortTagEntry .1.3.6.1.4.1.89.47.3.10 |
rlIpmFftPortTagEntryAn entry (conceptual row) containing the IPM FFT output port tag
information for IP datagrams from a particular source and
destination addresses. RlIpmFftPortTagEntry .1.3.6.1.4.1.89.47.3.10.1 |
rlIpmFftPortIndexThe value of the index of the IPM FFT.ro INTEGER .1.3.6.1.4.1.89.47.3.10.1.1 |
rlIpmFftPortSrcIpAddressThe IP source address for which this entry
contains IPM output port tag information.ro IpAddress .1.3.6.1.4.1.89.47.3.10.1.2 |
rlIpmFftPortDstIpAddressThe IPM destination address for which this entry
contains IPM port tag information.ro IpAddress .1.3.6.1.4.1.89.47.3.10.1.3 |
rlIpmFftPortOutputifIndexThe output ifIndexro INTEGER .1.3.6.1.4.1.89.47.3.10.1.4 |
rlIpmFftPortOutputTagThe output Vlan tag together with output ifIndex defines
pair (ifIndex, tag)ro INTEGER .1.3.6.1.4.1.89.47.3.10.1.5 |
rlIpmFftCountersTableThe (conceptual) table containing IPM Counters information
per FFT number. SEQUENCE OF RlIpmFftCountersEntry .1.3.6.1.4.1.89.47.3.11 |
rlIpmFftCountersEntryAn entry (conceptual row) containing the IPM Counters
information containing amount of IPM datagrams passed by certain FFT. RlIpmFftCountersEntry .1.3.6.1.4.1.89.47.3.11.1 |
rlIpmFftCountersIndexThe value of the index of the IPM FFT.ro INTEGER .1.3.6.1.4.1.89.47.3.11.1.1 |
rlIpmFftInReceivesThe amount of received IPM datagramsro INTEGER .1.3.6.1.4.1.89.47.3.11.1.2 |
rlIpmFftForwDatagramsThe amount of forwarded IPM datagramsro INTEGER .1.3.6.1.4.1.89.47.3.11.1.3 |
rlIpmFftInDiscardsThe amount of discarded IPM datagramsro INTEGER .1.3.6.1.4.1.89.47.3.11.1.4 |