RADLAN-VRRP
AI MIB Summary
The RADLAN-VRRP MIB module enables monitoring of Virtual Router Redundancy Protocol version 3 (VRRPv3) operational states, priority levels, and advertisement intervals on RADLAN network devices. It facilitates the tracking of master/backup transitions and virtual router group health to ensure high availability for IP routing infrastructure.
The private MIB module definition for VRRPv3 MIB.
Main OID:
rlVrrp.1.3.6.1.4.1.89.26.26
28
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
28 total| Object Name |
|---|
rlVrrpThe private MIB module definition for VRRPv3 MIB. MODULE-IDENTITY .1.3.6.1.4.1.89.26.26 |
rlVrrpv3OperationsTableThis table is parallel to vrrpv3OperationsTable, and is used
to change VRRP on interface working version, description and
display several statuses.
It contains private objects. SEQUENCE OF RlVrrpv3OperationsEntry .1.3.6.1.4.1.89.26.26.1 |
rlVrrpv3OperationsEntryAn operation entry mapping for a particular interface. RlVrrpv3OperationsEntry .1.3.6.1.4.1.89.26.26.1.1 |
rlVrrpv3OperationsDefaultPrimaryIpAddrIn the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpv3OperationsMasterIpAddr', should the virtual
router transition from backup state to master and no
vrrpv3OperationsDefaultPrimaryIpAddr was configured.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.89.26.26.1.1.1 |
rlVrrpv3OperationsPrimaryIpAddrStateThis object represents enabled/disabled state of user configured
primary address of the virtual router.ro Enumeration .1.3.6.1.4.1.89.26.26.1.1.2 |
rlVrrpv3OperationsVrDescriptionThe description of the VRRP virtual router.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.89.26.26.1.1.3 |
rlVrrpv3OperationsAdminStateThis object will enable/disable the virtual router
function. Setting the value to `up', will transition
the state of the virtual router from `initialize' to `backup'
or `master', depending on the value of `vrrpOperPriority'.
Setting the value to `down', will transition the
router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend on
other factors, such as the interface (IF) state.rw Enumeration .1.3.6.1.4.1.89.26.26.1.1.4 |
rlVrrpv3OperationsVrrpVersionCurrent VRRP virtual router version it is working with.rw Enumeration .1.3.6.1.4.1.89.26.26.1.1.5 |
rlVrrpv3OperationsMasterPriorityThis object specifies the priority which is used by master router.ro Unsigned32 .1.3.6.1.4.1.89.26.26.1.1.6 |
rlVrrpv3OperationsMasterAdvIntervalThe time interval, in centiseconds, which is used by master router
for sending advertisement messages.ro TimeInterval .1.3.6.1.4.1.89.26.26.1.1.7 |
rlVrrpv3OperationsMasterDownIntervalTime interval for Backup to declare Master down (centiseconds).ro TimeInterval UNITS "centiseconds" .1.3.6.1.4.1.89.26.26.1.1.8 |
rlVrrpv3OperationsSkewTimeTime to skew Master_Down_Interval in milliseconds.ro TimeInterval UNITS "centiseconds" .1.3.6.1.4.1.89.26.26.1.1.9 |
rlVrrpv3AssociatedIpAddrTableThis table is parallel to vrrpv3AssociatedIpAddrTable, and is used
to display address statuses.
It contains private objects. SEQUENCE OF RlVrrpv3AssociatedIpAddrEntry .1.3.6.1.4.1.89.26.26.2 |
rlVrrpv3AssociatedIpAddrEntryAn entry in the table contains an IP address that is
associated with a virtual router RlVrrpv3AssociatedIpAddrEntry .1.3.6.1.4.1.89.26.26.2.1 |
rlVrrpv3AssociatedIpAddrStateThis object represents state of the assosiated IP address,
backed up by current virtual router.ro Enumeration .1.3.6.1.4.1.89.26.26.2.1.1 |
rlVrrpv3CountersTableTable of virtual router statistics. SEQUENCE OF RlVrrpv3CountersEntry .1.3.6.1.4.1.89.26.26.3 |
rlVrrpv3CountersEntryAn entry in the table, containing statistics
information about a given virtual router. RlVrrpv3CountersEntry .1.3.6.1.4.1.89.26.26.3.1 |
rlVrrpv3CountersIfIndexInterface index InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.89.26.26.3.1.1 |
rlVrrpv3CountersChecksumErrorsThe total number of checksum errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.2 |
rlVrrpv3CountersRcvdPacketsLengthThe total number of packet length errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.3 |
rlVrrpv3CountersIpTtlErrorsThe total number of TTL errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.4 |
rlVrrpv3CountersRcvdInvalidTypePacketsThe total number of invalid VRRP packet type errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.5 |
rlVrrpv3CountersRcvdInvalidVrrpIdThe total number of invalid VRRP id errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.6 |
rlVrrpv3CountersProtoErrorsThe total number of invalid VRRP protocol errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.7 |
rlVrrpv3CountersAddressListErrorsThe total number of invalid IP address list errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.8 |
rlVrrpv3CountersAdvIntervalErrorsThe total number of invalid advertisement interval errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.9 |
rlVrrpv3CountersAuthErrorsThe total number of authentication errors received on
this interface.
Counter is only valid as long as there is a VRRP router defined on
this interface.ro Counter32 .1.3.6.1.4.1.89.26.26.3.1.10 |
rlVrrpv3CountersRowStatusRow status of the entry. Used for clearing table by setting.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.26.26.3.1.11 |