RADLAN-TIMESYNCHRONIZATION-MIB
AI MIB Summary
The RADLAN-TIMESYNCHRONIZATION-MIB enables monitoring and configuration of Simple Network Time Protocol (SNTP) sessions and time synchronization parameters on RADLAN network devices. It exposes metrics for time source status, synchronization state, and clock offset values to ensure accurate system timekeeping across the infrastructure.
The MIB module describes the private MIB for SNTP & TIME definitions.
Main OID:
rlTimeSynchronization.1.3.6.1.4.1.89.92
83
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
rlTimeSynchronizationThe MIB module describes the private MIB for SNTP & TIME definitions. MODULE-IDENTITY .1.3.6.1.4.1.89.92 |
rlTimeSyncMethodMode OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.1 |
rlTimeSyncMibVersionTimeSync Mib Version.ro INTEGER .1.3.6.1.4.1.89.92.1.1 |
rndTimeSyncManagedTimeThe time will be sent in the format hhmmssrw DisplayString .1.3.6.1.4.1.89.92.1.2 |
rndTimeSyncManagedDateThe date will be sent in the format ddmmyyrw DisplayString .1.3.6.1.4.1.89.92.1.3 |
rndTimeSyncManagedDateTimeThe date and time will be sent in the format ddmmyyhhmmssrw DisplayString .1.3.6.1.4.1.89.92.1.4 |
rlTimeSyncMethodMethod to be used for time synchronization in the device.rw Enumeration .1.3.6.1.4.1.89.92.1.5 |
rlTimeZoneOffset from Greenwich time (format [+/-]hh:mm).rw DisplayString .1.3.6.1.4.1.89.92.1.6 |
rlTimeZoneCodeCode definition for current TimeZone.rw DisplayString .1.3.6.1.4.1.89.92.1.7 |
rlDaylightSavingTimeModeDaylight Saving Time - Recurring/Date/None.rw Enumeration .1.3.6.1.4.1.89.92.1.8 |
rlDaylightSavingTimeStartDaylight Saving Time start date.
In recurring mode: week wday month hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)rw OCTET STRING .1.3.6.1.4.1.89.92.1.9 |
rlDaylightSavingTimeEndDaylight Saving Time end date.
In recurring mode: week wday month hh:mm
In date mode: month day year hh:mm
week: 0-6 (0=First, 6=Last)
wday: 1-7 (Sunday-Saturday)
month: 1-12 (January-December)
day: 1-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)rw OCTET STRING .1.3.6.1.4.1.89.92.1.10 |
rlDaylightSavingTimeOffsetDaylight Saving Time - The number of minutes to add to
the clock during summer time.rw Integer32 .1.3.6.1.4.1.89.92.1.11 |
rlDaylightSavingTimeCodeCode definition for current Daylight Saving Time.rw DisplayString .1.3.6.1.4.1.89.92.1.12 |
rlTZDSTOffsetLocal Time Zone and Daylight Saving Time offset
in seconds.ro INTEGER .1.3.6.1.4.1.89.92.1.13 |
rlSntpNtpClient OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2 |
rlSntpNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.1 |
rlSntpNtpMibVersionSntpNtp Mib Version.ro INTEGER .1.3.6.1.4.1.89.92.2.1.1 |
rlSntpNtpConfigModeCurrent configuration operational mode of SNTP/NTP client.ro Enumeration .1.3.6.1.4.1.89.92.2.1.2 |
rlSntpNtpConfigSysStratumThe stratum of the local clock. If the value is set
to 1, i.e., this is a primary reference, then the
Primary-Clock procedure described in Section 3.4.6,
in RFC-1305 is invoked.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.3 |
rlSntpNtpConfigPollIntervalPeriod of time (in seconds) between succesive attempts to
perform an update via SNTP.rw INTEGER .1.3.6.1.4.1.89.92.2.1.4 |
rlSntpNtpConfigPrimaryPollSrvAddrIp Address of a trusted SNTP server for polling.ro IpAddress .1.3.6.1.4.1.89.92.2.1.5 |
rlSntpNtpConfigPrimaryPollSrvMridThe mrid of the primary server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.6 |
rlSntpNtpConfigPrimaryPollSrvIfIndexThe interface addressed of the primary server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.7 |
rlSntpNtpConfigPrimaryPollSrvStratumThe stratum of the primary polling server.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.8 |
rlSntpNtpConfigSyncSrvAddrIp Address of the synced server.ro IpAddress .1.3.6.1.4.1.89.92.2.1.9 |
rlSntpNtpConfigSyncSrvMridThe mrid of the synced server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.10 |
rlSntpNtpConfigSyncSrvIfIndexThe interface addressed of the synced server.ro INTEGER .1.3.6.1.4.1.89.92.2.1.11 |
rlSntpNtpConfigSyncSrvTypeSynced server type.ro Enumeration .1.3.6.1.4.1.89.92.2.1.12 |
rlSntpNtpConfigSyncSrvStratumThe stratum of the synced server.ro NTPStratum .1.3.6.1.4.1.89.92.2.1.13 |
rlSntpNtpConfigRetryTimeoutSNTP/NTP requests Retry Interval.ro Integer32 .1.3.6.1.4.1.89.92.2.1.14 |
rlSntpNtpConfigRetryCntSNTP/NTP requests Retry Count.ro Integer32 .1.3.6.1.4.1.89.92.2.1.15 |
rlSntpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.2 |
rlSntpClientModeCurrent operational mode of SNTP client.ro Enumeration .1.3.6.1.4.1.89.92.2.2.1 |
rlSntpUnicastAdminStateSNTP Unicast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.2 |
rlSntpBroadcastAdminStateSNTP Broadcast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.3 |
rlSntpAnycastAdminStateSNTP Anycast Administrative state - Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.4 |
rlSntpUnicastPollStateSNTP Unicast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.5 |
rlSntpBroadcastPollStateSNTP Broadcast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.6 |
rlSntpAnycastPollStateSNTP Anycast poll state - TRUE for polled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.7 |
rlSntpAuthenticationStateSNTP authentication state- Enable/Disable SNTP.rw Enumeration .1.3.6.1.4.1.89.92.2.2.8 |
rlTimeValidFlagIs time valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.9 |
rlSntpConfigBroadcastTableA table containing broadcast mode information per
interface. SEQUENCE OF RlSntpBroadcastEntry .1.3.6.1.4.1.89.92.2.2.10 |
rlSntpBroadcastEntryPrivate paramters for interface:
sntp status, broadcast mode. RlSntpBroadcastEntry .1.3.6.1.4.1.89.92.2.2.10.1 |
rlSntpBroadcastIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.10.1.1 |
rlSntpBroadcastIfAdminStateSNTP interface Adminstrative state- Enable/Disable SNTP.
In case of reinitializing polling or time
synchronization this MIB is modified. The MIB can
be enabled even thought it is already enabled.rw Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.2 |
rlSntpBroadcastModeSNTP/NTP Broadcast Mode.
none - no broadcast SNTP packets are received or sent.
Receive - host only receive SNTP packets that were sent
to broadcast address (were not directed to
the host). This is multicast mode in the RFC.
Send - host only send SNTP packets and wait for replies
directed to the host. This is anycast mode in
the RFC.
ReceiveSend - host receive broadcast messages (destination
is broadcast address in the received messages)
and send SNTP packets to wait for replies
directed to the host (destination address
of the reply is the host address). This mode
combines anycast and multicast modes in the
RFC.rw Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.3 |
rlSntpBroadcastPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.10.1.4 |
rlSntpBroadcastAddressIp Address of a trusted SNTP server.ro IpAddress .1.3.6.1.4.1.89.92.2.2.10.1.5 |
rlSntpBroadcastStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.10.1.6 |
rlSntpBroadcastLastRespSNTP Broadcast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.10.1.7 |
rlSntpBroadcastStatusThe Operational State of the remote IP Address of
the SNTP Broadcast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.10.1.8 |
rlSntpBroadcastOffsetThe estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.10.1.9 |
rlSntpBroadcastDelayThe estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.10.1.10 |
rlSntpBroadcastRowStatusThe Status of this SNTP broadcast interface
information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.10.1.11 |
rlSntpConfigAnycastTableA table containing anycast information per
interface. SEQUENCE OF RlSntpAnycastEntry .1.3.6.1.4.1.89.92.2.2.11 |
rlSntpAnycastEntryPrivate paramters for interface:
server info. RlSntpAnycastEntry .1.3.6.1.4.1.89.92.2.2.11.1 |
rlSntpAnycastIfIndexThe interface addressed by this entry. INTEGER .1.3.6.1.4.1.89.92.2.2.11.1.1 |
rlSntpAnycastAddressIp Address of a trusted SNTP server.ro IpAddress .1.3.6.1.4.1.89.92.2.2.11.1.2 |
rlSntpAnycastStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.11.1.3 |
rlSntpAnycastLastRespSNTP Anycast Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.11.1.4 |
rlSntpAnycastStatusThe Operational State of the remote IP Address of
the SNTP Anycast.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.11.1.5 |
rlSntpAnycastOffsetThe estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.11.1.6 |
rlSntpAnycastDelayThe estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.11.1.7 |
rlSntpAnycastRowStatusThe Status of this SNTP anycast interface
information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.11.1.8 |
rlSntpConfigServerTableA table containing trusted SNTP servers to be queried in
unicast or broadcast mode. SEQUENCE OF RlSntpServerEntry .1.3.6.1.4.1.89.92.2.2.12 |
rlSntpServerEntryA trusted server. RlSntpServerEntry .1.3.6.1.4.1.89.92.2.2.12.1 |
rlSntpServerAddressIp Address of a trusted SNTP server. IpAddress .1.3.6.1.4.1.89.92.2.2.12.1.1 |
rlSntpServerPolledTRUE if participating in polling cycle, else FALSE.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.12.1.2 |
rlSntpServerStratumThe stratum of this server.ro NTPStratum .1.3.6.1.4.1.89.92.2.2.12.1.3 |
rlSntpServerLastRespSNTP Server Last Response Timero NTPTimeStamp .1.3.6.1.4.1.89.92.2.2.12.1.4 |
rlSntpServerStatusThe Operational State of the remote IP Address of
the SNTP Server.
unknown - requests were not sent yet.
inProcess - replies were not received yet.
up - server sent SNTP packets.
down - server stopped sending SNTP packets.ro Enumeration .1.3.6.1.4.1.89.92.2.2.12.1.5 |
rlSntpServersOffsetThe estimated offset of the server's clock relative to
the local clock, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPTimeStamp UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.12.1.6 |
rlSntpServersDelayThe estimated round-trip delay of the server's clock
relative to the local clock over the network path
between them, in seconds. The host determines the
value of this object using the algorithm described in
RFC 2030.ro NTPSignedTimeValue UNITS "seconds" .1.3.6.1.4.1.89.92.2.2.12.1.7 |
rlSntpServersKeyIdentifierAuthentication key identifier. The valid range is
1-4294967295.
Value zero, means no authentication is being done.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.12.1.8 |
rlSntpServerRowStatusThe Status of this SNTP server information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.12.1.9 |
rlSntpConfigAuthenticationTableA table authentication keys. SEQUENCE OF RlSntpAuthenticationEntry .1.3.6.1.4.1.89.92.2.2.13 |
rlSntpAuthenticationEntryKeys information for authenticationof NTP packets. RlSntpAuthenticationEntry .1.3.6.1.4.1.89.92.2.2.13.1 |
rlSntpAuthenticationKeyIDThe key identifier. Valid rabge for key identifier
is 1-4294967295.rw Unsigned32 .1.3.6.1.4.1.89.92.2.2.13.1.1 |
rlSntpAuthenticationKeyValueKey value.rw DisplayString .1.3.6.1.4.1.89.92.2.2.13.1.2 |
rlSntpAuthenticationKeyStateAuthentication key state - Enable/Disable key.rw Enumeration .1.3.6.1.4.1.89.92.2.2.13.1.3 |
rlSntpAuthenticationRowStatusThe Status of this Authentication key information.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.89.92.2.2.13.1.4 |
rlNtpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.89.92.2.3 |